Vulnerability database

391 results · page 1 of 8

• Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure rds_rdma_cm_eCVE-2026-99212 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let the rdma_cm destroy an id RDS still owns on route failure rds_rdma_cm_event_handler_cmn() hands the return value of rdma_resolve_route() straight back to the rdma_cm on RDMA_CM_EVENT_ADDR_RESOLVED. A synchronous failure there - -ENOMEM from the route work allocation, an SA query that cannot be set up, a RoCE route with no usable device - makes addr_handler() destroy the id the event was delivered on. That id is ic->i_cm_id, and nothing clears the pointer: the connection sits in RDS_CONN_CONNECTING with a freed id until its shutdown calls rdma_disconnect() and rdma_destroy_id() on it. The ROUTE_RESOLVED case already avoids this: rds_ib_cm_initiate_connect() forces a zero return while ic->i_cm_id == cm_id, as the comment there explains. Do the same here - drop the connection and return 0 - so the id stays RDS's to destroy from the shutdown, and the reconnect gets a fresh one.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: net: rds: fix uninitialized trans dereference in CM event handler rds_rdma_cm_event_handleCVE-2026-99166 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: rds: fix uninitialized trans dereference in CM event handler rds_rdma_cm_event_handler_cmn() assigns trans only when the RDMA device is an InfiniBand CA (RDMA_NODE_IB_CA). On any other device type, e.g. an iWARP RNIC such as siw, trans stays uninitialized, but the event switch dereferences it: unconditionally in the RDMA_CM_EVENT_CONNECT_REQUEST case via trans->cm_handle_connect(), and (with a connection context) in the ROUTE_RESOLVED and ESTABLISHED cases. An RDS listener on an iWARP device therefore crashes the kernel as soon as a connect request arrives: with CONFIG_INIT_STACK_ALL_ZERO the wild load becomes a NULL dereference at offset 0xa0 (&trans->cm_handle_connect) in the iw_cm_wq workqueue. GCC masks the bug in default builds by folding the uninitialized load into &rds_ib_transport; Clang-built kernels take the real uninitialized path and oops. The active side can land on a non-IB device too: the id that rds_ib_conn_path_connect() creates is not restricted to a node type, so rdma_resolve_addr() binds it to whichever device serves the local address, and an iWARP RNIC on the same netdev qualifies.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 27, 2026llama.cpp b8841 before b11865 contains an out-of-bounds write vulnerability in the ggml-rpc RDMA transport rdma_recv() function that allows unauthenticated peerCVE-2026-118375 · Other software · ggml-org · reported by VulnCheckCritical 9.2

  llama.cpp b8841 before b11865 contains an out-of-bounds write vulnerability in the ggml-rpc RDMA transport rdma_recv() function that allows unauthenticated peers to overflow the rpc-server stack. Attackers advertising RDMA capabilities in the HELLO message can send up to 256 KiB into a 1-byte stack variable in rpc_serve_client(), crashing the server or potentially executing code.

  Product

  llama.cpp

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 21, 2026A data race in the RDMA transport of Apache bRPC (versions < 1.18.0) allows a remote client to crash the server process (denial of service) when RDMA is enabledCVE-2026-82942 · Websites & servers · Apache Software Foundation · reported by security@apache.org

  A data race in the RDMA transport of Apache bRPC (versions < 1.18.0) allows a remote client to crash the server process (denial of service) when RDMA is enabled at build time and runtime. Root Cause: When a bRPC server negotiates RDMA with a client, the handshake completes on the TCP fd, but the server kept parsing that fd afterwards as if it were still an RPC channel. The TCP-fd input stream and the RDMA QP input stream (driven by CQ events) shared the same Socket::_read_buf, preferred_index and parsing_context without synchronization. In addition, CQ event processing could start while the handshake parsing was still in progress, and the handshake ACK phase could consume bytes belonging to the next protocol. A remote, unauthenticated client that has completed the RDMA handshake can send data on the TCP fd at the same time RDMA messages are being processed, corrupting the shared input buffer and parser state and crashing the server process (CWE-362, availability impact). Affected Scenarios: Use a bRPC server with RDMA support enabled (built with BRPC_WITH_RDMA and serving rdma:// / SOCKET_MODE_RDMA sockets) and accept connections from untrusted clients. Deployments without RDMA a

  Product

  Apache bRPC

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comlists.apache.org

• Oct 15, 2026A buffer overflow vulnerability in HPE NonStop RDMA SERVICES NSK may cause out-of-bounds memory write, which may result in memory corruption.CVE-2026-79841 · Other software · Hewlett Packard Enterprise · reported by security-alert@hpe.comMedium 5.8

  A buffer overflow vulnerability in HPE NonStop RDMA SERVICES NSK may cause out-of-bounds memory write, which may result in memory corruption.

  Product

  HPE NonStop RDMA SERVICES NSK

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordsupport.hpe.com

• Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Fix mmap_lock/disassociation_lock circular dependency Commit 51976c6cd786 ("RCVE-2026-98431 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Fix mmap_lock/disassociation_lock circular dependency Commit 51976c6cd786 ("RDMA/core: Provide rdma_user_mmap_disassociate() to disassociate mmap pages") introduced disassociation_lock to protect new mmap registrations against uverbs_user_mmap_disassociate(), but created an ABBA deadlock: Thread A (mmap / fork): mmap_lock -> disassociation_lock Thread B (disassociate): disassociation_lock -> mmap_lock Fix by removing disassociation_lock entirely and using the pre-existing hw_destroy_rwsem instead. hw_destroy_rwsem already provides the same protection: rdma_umap_open() and ib_uverbs_mmap() both use down_read_trylock() before registering a new VMA, so holding hw_destroy_rwsem in uverbs_user_mmap_disassociate() is sufficient to block new registrations. trylock is used in both mmap paths (not blocking down_read) because mmap_lock is already held on entry, and uverbs_user_mmap_disassociate() acquires mmap_lock internally — a blocking read would recreate the same deadlock. The only caller that was not taking hw_destroy_rwsem for write was rdma_user_mmap_disassociate(). Fix it to take the rw

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Keep admin queues alive while IRQ is registered The management IRQ handler accesCVE-2026-98430 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Keep admin queues alive while IRQ is registered The management IRQ handler accesses both the admin completion queue and the async event queue. The driver registered the IRQ before constructing these queues and destroyed them before freeing the IRQ, so the handler's lifetime was not contained by the resources it accesses. Initialize the queues with interrupts masked, request the IRQ, and then switch to interrupt mode. On removal, reset the device and free the IRQ before destroying the queues. Also reset the device before destroying the queues if IRQ registration fails, because the device already has their DMA addresses.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Keep EQ resources alive while IRQ is registered The completion IRQ handler accesCVE-2026-98429 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Keep EQ resources alive while IRQ is registered The completion IRQ handler accesses the EQ state and DMA buffer. Its IRQ was registered before that state was initialized, while teardown released the buffer before free_irq() synchronized the handler. Initialize the EQ without arming it, register the IRQ, and then arm it. Reverse the resource order during teardown by freeing the IRQ before destroying the EQ.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept We need to cleCVE-2026-98367 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept We need to clear cep before release state_lock as siw_qp_llp_close and siw_qp_modify->siw_qp_llp_close did. Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock is released before the error path cleanup. A concurrent ibv_modify_qp() transitioning the QP to ERROR can race in this window: siw_accept() ibv_modify_qp(ERROR) ---------------------- ---------------------- siw_qp_modify() fails up_write(&qp->state_lock) down_write(&qp->state_lock) nextstate_from_idle(): if (qp->cep) siw_cep_put(qp->cep) <- frees cep qp->cep = NULL goto error cep->qp = NULL <- UAF Clear qp->cep and drop the association reference taken by siw_cep_get(), all under the write lock held from the initial down_write(&qp->state_lock). Thread B therefore sees qp->cep == NULL, skips its own put, and cannot free the cep before siw

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: validate access flags before swapping the MR's PD rxe_rereg_user_mr() reassigns CVE-2026-98366 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: validate access flags before swapping the MR's PD rxe_rereg_user_mr() reassigns mr->ibmr.pd first and only then validates the IB_MR_REREG_ACCESS argument: if (flags & IB_MR_REREG_PD) { rxe_put(old_pd); rxe_get(pd); mr->ibmr.pd = ibpd; } if (flags & IB_MR_REREG_ACCESS) { if (access & ~RXE_ACCESS_SUPPORTED_MR) return ERR_PTR(-EOPNOTSUPP); mr->access = access; } Both flags pass the entry check because RXE_MR_REREG_SUPPORTED is IB_MR_REREG_PD | IB_MR_REREG_ACCESS, so a caller can reach the access check with mr->ibmr.pd already reassigned. mr->ibmr.pd is owned by the core, which adjusts pd->usecnt only on the success path: ib_uverbs_rereg_mr() jumps to put_new_uobj on a driver error without undoing the reassignment, so mr->pd == new_pd while the usecnts still charge the MR to orig_pd. ib_dereg_mr_user() then decrements new_pd, whose count can reach zero while a memory window still references it; uverbs_free_pd() frees the PD on that count alone and rxe_mw_cleanup() writes to freed memory: BUG: KASAN: slab-use-after-free in __rxe_put+0x31/0xa0 Write of size 4 at addr ffff8881301dd690

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access mr_check_range() CVE-2026-98365 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access mr_check_range() validates that [iova, iova+length) falls within the registered MR range using wraparound-prone arithmetic: if (iova < mr->ibmr.iova || iova + length > mr->ibmr.iova + mr->ibmr.length) A remote peer can craft an RDMA-Write/Read RETH so that iova + length wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the check. rxe_mr_iova_to_index() then computes a huge index (int idx, only guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences mr->page_info[huge], causing an out-of-bounds read/write and a kernel oops that is triggerable by an unauthenticated remote peer. Rewrite the check in overflow-safe form; the first two clauses guarantee that the subsequent subtractions do not underflow: if (iova < mr->ibmr.iova || length > mr->ibmr.length || iova - mr->ibmr.iova > mr->ibmr.length - length) With the fix, mr_check_range() returns -EINVAL for the crafted iova and the responder reports REMOTE_ACCESS_ERROR instead of triggering the OOB.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Restore HMM_PFN_WRITE check in ODP write paths Commit 0b261d7c1cd3 ("RDMA/rxe: BCVE-2026-98361 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Restore HMM_PFN_WRITE check in ODP write paths Commit 0b261d7c1cd3 ("RDMA/rxe: Break endless pagefault loop for RO pages") dropped the access permission test from rxe_check_pagefault() and left only HMM_PFN_VALID. A page faulted in read-only, for example a page-cache folio behind a PROT_READ file mapping, then satisfies the check and ODP write operations (RDMA WRITE, RDMA READ response, SEND payload, atomics) modify it through kmap without ever breaking CoW. An unprivileged user can register an ODP MR over such a mapping and have incoming RDMA traffic overwrite the page cache of a file it only holds O_RDONLY, including /etc/passwd or setuid binaries. This is the same primitive class as Dirty COW and CVE-2022-2590. mlx5 has the missing invariant: its ODP path sets the device write bit only for pfns that carry HMM_PFN_WRITE. Restore it in rxe by requiring HMM_PFN_WRITE in rxe_check_pagefault() for every operation except RXE_PAGEFAULT_RDONLY. A write to a non-writable VMA now fails the one fault attempt with -EPERM from hmm_vma_fault() instead of re-faulting forever. For a writable VMA the fault breaks C

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds rxe_get_mcg() publiCVE-2026-98360 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds rxe_get_mcg() publishes a newly allocated multicast group in rxe->mcg_tree before programming the backing Ethernet multicast address with rxe_mcast_add(), which runs outside mcg_lock. A local userspace RDMA client reaches this path with ATTACH_MCAST on a UD QP; if rxe_mcast_add() then returns an error (for example -ENODEV when the backing netdev has been removed, or a propagated dev_mc_add() error), the unwind frees the published group without removing it from the tree. A later lookup of the same MGID dereferences the freed struct rxe_mcg from __rxe_lookup_mcg(). Fix this by keeping the new mcg private until rxe_mcast_add() succeeds. Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add() before taking the tree reference, and free the still-private mcg on failure. Because the group is never visible in mcg_tree until the multicast address is programmed, no concurrent caller can look it up or attach a QP to a group that is about to be torn down, so the error path needs no conditional unwind. If another caller publishes the sam

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Reject unregistering netdevs in ib_get_eth_speed ib_device_get_netdev() intentiCVE-2026-98359 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Reject unregistering netdevs in ib_get_eth_speed ib_device_get_netdev() intentionally returns a referenced net_device even when it is unregistering, so matching and cleanup callers can still find the association. The reference keeps struct net_device allocated, but does not guarantee that the device remains operational. ib_get_eth_speed() uses the returned device operationally by invoking its ethtool callback. Although that call is made under RTNL, the function does not verify the registration state first. An asynchronous RDMA port query can therefore call into a netdev after NETDEV_UNREGISTER and ndo_uninit have completed. Check for NETREG_REGISTERED while holding RTNL and return -ENODEV for a device which is being unregistered. Keeping RTNL across the check and the ethtool operation prevents unregister from starting between them. Keep the speed fallback and warning under RTNL as well, so the warning can safely read netdev->name. Drop the netdev reference before releasing RTNL once all accesses to the device are complete.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: check create_singlethread_workqueue() in DCB setup bnxt_re_init_dcb_wq() ignCVE-2026-98356 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: check create_singlethread_workqueue() in DCB setup bnxt_re_init_dcb_wq() ignores a failed allocation. The async DCB handler later calls queue_work() on the NULL pointer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: guard against null kobj name In the client, if `init_path()` errors, the calleeCVE-2026-98355 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs: guard against null kobj name In the client, if `init_path()` errors, the callee tries to clean up with `rtrs_clt_close_conns()`. However, this can lead to calling the event tracing code with `clt_path->kobj->name` being `NULL` and thus causing a null pointer dereference when trying to copy from it. This just adds a guard to check that the name is not `NULL` before copying from it. The server appears to have a similar pattern.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Fix receive buffer leak when PKey enforcement fails ib_mad_complete_recv() initiCVE-2026-98354 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Fix receive buffer leak when PKey enforcement fails ib_mad_complete_recv() initializes mad_recv_wc->rmpp_list and then runs ib_mad_enforce_security() before linking recv_buf onto that list. On failure it calls ib_free_recv_mad(), which only walks rmpp_list and frees the ib_mad_private of every buffer found there. As the list is still empty at that point, nothing is freed at all. The caller cannot clean up either: ib_mad_recv_done() sets recv to NULL right after ib_mad_complete_recv() returns, assuming the MAD layer took ownership of the buffer. Every MAD that fails the PKey check therefore leaks one ib_mad_private (about 300 bytes per IB port MAD, ~2K for OPA), and a remote node can trigger this repeatedly by sending MADs with a wrong PKey. Link recv_buf onto rmpp_list right after the list is initialized, so the error path has something to free.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Use IRQ-safe XArray helpers for QP and CQ tables Locked QP and CQ lookups fromCVE-2026-98353 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Use IRQ-safe XArray helpers for QP and CQ tables Locked QP and CQ lookups from EQ interrupts can deadlock with create-path XArray updates. If an interrupt arrives while the create path holds the plain xa_lock, the lookup spins forever trying to acquire the same lock. Use IRQ-safe XArray helpers for all QP and CQ create-path updates, including the GSI QP store and error paths. Initialize both arrays with XA_FLAGS_LOCK_IRQ so sleeping allocations preserve interrupt state.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted The client borrows shared CQ cCVE-2026-98352 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted The client borrows shared CQ credits in the ADDR_RESOLVED handler via ib_cq_pool_get(), before the peer is connected. create_cm() can return -ERESTARTSYS from wait_event_interruptible_timeout() without destroying the CM ID. The init_conns() and stop-and-destroy paths then call destroy_con_cq_qp() while cq is still NULL (no PUT) and only afterwards rdma_destroy_id(). CMA serializes the handler against rdma_destroy_id() with handler_mutex, but that does not order the GET against destroy_con_cq_qp(). If ADDR_RESOLVED has already passed the DESTROYING check, it can take con_mutex, GET credits, and then lose the con to kfree. Device unregister later hits WARN_ON(cq->cqe_used) in ib_cq_pool_cleanup(). Set a per-connection flag under con_mutex before CQ/QP teardown so a racing ADDR_RESOLVED cannot borrow credits after teardown has begun.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Bound fragmented header copies by the remaining length siw_get_hdr() can receiveCVE-2026-98323 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Bound fragmented header copies by the remaining length siw_get_hdr() can receive an extended DDP/RDMAP header across more than one TCP callback. The first callback may receive most of the header, while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead of the number of missing bytes. This makes the destination move past the end of the header and overwrite the receive state, including fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd value as a copy offset, which creates an OOB write. Use the number of header bytes already received when calculating the next copy length.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Serialize join and leave on copy_to_user failure rdma_join_multicast() queues RCVE-2026-98253 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Serialize join and leave on copy_to_user failure rdma_join_multicast() queues RoCE work that later reads the ucma_multicast through event->param.ud.private_data, then list_add()s the CMA multicast at the head of id_priv->mc_list. rdma_leave_multicast() matches only by sockaddr and destroys the first hit. ucma_process_join() used to drop ctx->mutex after a successful join and retake it only if copy_to_user() failed. Two concurrent JOIN_MCAST calls with the same address can therefore insert a second CMA entry before the first thread's leave. leave then cancels the newer work and the older worker still dereferences the ucma_multicast that the first thread frees. Keep ctx->mutex held from rdma_join_multicast() through copy_to_user() and, on -EFAULT, through rdma_leave_multicast() so leave cannot miss this join. Do not leave if join itself failed: that path never published this address on mc_list, and a leave-by-addr would destroy an earlier successful join.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/core: fix refcount bug in iwpm_get_nlmsg_request() iwpm_get_nlmsg_request() initializCVE-2026-98252 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: RDMA/core: fix refcount bug in iwpm_get_nlmsg_request() iwpm_get_nlmsg_request() initializes refcount _after_ list_add_tail() making it accessible to global list where another CPU can kref_get() on nlmsg_request causing a refcount "addition on 0" bug. Fix this by initializing kref _before_ list_add_tail() so refcount for nlmsg_request can be incremented/decremented normally. In addition, also initialize every field before list_add_tail().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbd_connection leak on cifs_get_tcp_session() error When an RDMA connectCVE-2026-98172 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbd_connection leak on cifs_get_tcp_session() error When an RDMA connection is successfully established via smbd_get_connection() but cifs_get_tcp_session() later fails (e.g. kthread_create() returns an error), the error path frees tcp_ses without first destroying the smbd_connection. Fix this by calling smbd_destroy() in the out_err cleanup path before kfree(tcp_ses). smbd_destroy() safely handles the case where smbd_conn is NULL, so it can be called unconditionally.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Fix srpt_alloc_rw_ctxs() unwind counters When srpt_alloc_rw_ctxs() fails partwaCVE-2026-100075 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/srpt: Fix srpt_alloc_rw_ctxs() unwind counters When srpt_alloc_rw_ctxs() fails partway through a multi-buffer indirect descriptor, the unwind path destroys RDMA contexts but leaves stale n_rw_ctx and n_rdma values (and a dangling rw_ctxs pointer). Later sq_wr_avail accounting in srpt_queue_response() or srpt_write_pending() can then subtract the wrong number of send queue credits. Reset the counters and clear rw_ctxs after freeing the heap allocation before returning an error.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix -EIO cleanup order in queue_rq On -EIO, the RDMA queue_rq path reports a hoCVE-2026-98154 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix -EIO cleanup order in queue_rq On -EIO, the RDMA queue_rq path reports a host path error and then still cleans up the command and unmaps the SQE DMA. The path error helper completes the request, so that is double cleanup and DMA unmap after the request is already complete. Unmap the SQE first, then report the host path error. Skip the outer command cleanup on that path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix queue leak when connect backlog is exceeded When pending disconnecting queCVE-2026-98152 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix queue leak when connect backlog is exceeded When pending disconnecting queues exceed the backlog limit, the connect path only drops the device reference and leaks the newly allocated queue and its IB resources.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: Don't sleep inside rds_ib_conn_path_shutdown New rds rdma self tests exposed a haCVE-2026-97491 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/rds: Don't sleep inside rds_ib_conn_path_shutdown New rds rdma self tests exposed a hang when tearing down the ib network configs. This is caused by the shutdown worker thread sleeping on the wait_event call, which blocks other work items in the queue. Fix this by changing wait_event to wait_event timeout, and looping until the wait check succeeds.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/counter: Fix num_counters leak on bind_qp failure in alloc_and_bind() When __rdma_couCVE-2026-97477 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/counter: Fix num_counters leak on bind_qp failure in alloc_and_bind() When __rdma_counter_bind_qp() fails in alloc_and_bind(), the error path jumps to err_mode which frees the counter without decrementing port_counter->num_counters. The only place that decrements is rdma_counter_free(), which is unreachable since the counter was never successfully bound. This leak accumulates across repeated failures, permanently preventing the port from switching to AUTO mode (-EBUSY in __counter_set_mode()) and blocking the MANUAL→NONE auto-revert in rdma_counter_free(). When the mode was NONE before the call, the MANUAL mode set by __counter_set_mode() also leaks since the revert logic is never reached. Add an err_bind label between the num_counters increment and the existing err_mode label. It decrements num_counters and mirrors the MANUAL→NONE revert from rdma_counter_free(), ensuring the port state is fully restored on bind failure.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Be careful about boundary conditions in ib_umem_find_best_pgsz() Several cornerCVE-2026-97421 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Be careful about boundary conditions in ib_umem_find_best_pgsz() Several corner cases, especially important on 32 bits: - umem->iova is u64, the function argument should pass in u64 or iova will be truncated - Check that the length is not too large for the iova - Check that lengths > 4G don't overflow the GENMASK

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Fix integer underflow in process_read and process_write usr_len is read froCVE-2026-97413 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-srv: Fix integer underflow in process_read and process_write usr_len is read from a network-supplied message field (le16_to_cpu) and used to compute data_len = off - usr_len without validating that usr_len <= off. A malicious RDMA client can send usr_len > off causing an integer underflow, resulting in data_len wrapping to a huge size_t value which is then passed to the rdma_ev callback as a memory length, leading to out-of-bounds memory access. Fix by reading and validating usr_len <= off before rtrs_srv_get_ops_ids() in both process_read() and process_write(), ensuring the early return path acquires no reference and has no resource leak.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Validate udata before executing commands The destroy callbacks currently zerCVE-2026-93277 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Validate udata before executing commands The destroy callbacks currently zero the udata output after tearing down driver resources. If the userspace access fails, uverbs preserves the uobject and allows the destroy callback to run again, even though the driver resource has already been freed. Call ib_no_udata_io() before teardown so udata failures are detected while the resource is still intact, then return success after teardown completes. As part of this change, move ib_respond_empty_udata() to the start of the create and modify flows. While this is not strictly required for general create flows, as the core layer unwinds uobjects on failure, it is necessary for create AH. In _rdma_create_ah(), the HW object is otherwise leaked.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in uverbs_free_dmah() When accessing a dmah via thCVE-2026-93267 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in uverbs_free_dmah() When accessing a dmah via the netlink path the only synchronization mechanism for the said dmah is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of uverbs_free_dmah(), which is too late, since by that point vendor-specific resources associated with the dmah might already be freed. This can leave a short window where the dmah remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of uverbs_free_dmah(), ensuring that the dmah is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a dmah that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix PBL chunk length computation On register MR, when creating the PBL, if it's CVE-2026-93264 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/efa: Fix PBL chunk length computation On register MR, when creating the PBL, if it's an indirect PBL we create a chunk list to hold the PBL pages pointers. Each chunk is 4KB in size and can hold 510 addresses (EFA_PTRS_PER_CHUNK) and has a 12-byte control buffer at the end of it holding the next chunk's pointer and its length. If the PBL number of pages is a multiple of EFA_PTRS_PER_CHUNK, the calculated last chunk length is wrongly computed as 0, even though that chunk is fully populated with 510 real page pointers. This wrong length is used both to DMA map the chunk and is propagated to the device, causing the device to see the chunk as empty and reject the memory registration. Fix the calculation so it will be performed only if the number of pages isn't a multiple of EFA_PTRS_PER_CHUNK, if it is, its already handled in the above loop correctly. Also prevent out-of-bounds reach in the chunks array in such scenario.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Write/Reply chunks with segcount 0 A peer can send a Write or Reply chunk CVE-2026-93228 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Write/Reply chunks with segcount 0 A peer can send a Write or Reply chunk whose segcount field is zero. xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero passes the range check, and xdr_inline_decode(stream, 0) returns the current (non-NULL) cursor without advancing. The function returns true and pcl_alloc_write() then links a struct svc_rdma_chunk with ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl. An earlier patch in this series made pcl_for_each_segment() safe for ch_segcount == 0, so this no longer drives the memory walk it used to. Rejecting the malformed frame at the decode boundary is still worthwhile as defense in depth: it keeps degenerate zero-segment chunks off the parsed chunk lists entirely, so any future consumer that walks ch_segments directly cannot observe one, and it makes the zero-floor easy to backport to trees where the macro change is more intrusive. RFC 8166 has no meaning for a Write/Reply chunk that describes no remote buffer, so no legitimate client is affected. xdr_check_reply_chunk() funnels Reply chunks through xdr_check_write_chunk() and inhe

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix unmatched rn_unregister on failed accept When svc_rdma_accept() takes the errCVE-2026-93224 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix unmatched rn_unregister on failed accept When svc_rdma_accept() takes the errout path before rpcrdma_rn_register() has succeeded, the existing cleanup block calls rpcrdma_rn_unregister(dev, &newxprt->sc_rn) unconditionally. svcxprt_rdma is kzalloc'd, so on that path sc_rn.rn_index is 0 and sc_rn.rn_done is NULL; the unregister therefore xa_erase()s another caller's slot 0 and performs an unmatched kref_put() on the rpcrdma_device's rd_kref. The same errout also brackets the cleanup with svc_xprt_get()/ svc_xprt_put() around the kref_init() birth reference. The kref goes 1 -> 2 -> 1 and never reaches 0, so the svcxprt_rdma (and the net/ns_tracker it pinned) is leaked on every failed accept. rpcrdma_rn_register() writes rn->rn_done last, only after xa_alloc() and kref_get() have both succeeded, so rn_done == NULL is a natural "never registered" sentinel. Guard rpcrdma_rn_unregister() with an early return when rn_done is NULL, and clear rn_done before the matching xa_erase() so a repeated unregister is also a no-op. With that guard in place, the accept errout drops the kref_init() birth reference via

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Add refcounting to user ring MRs Prevent userspace from deregistering the MRs CVE-2026-93154 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Add refcounting to user ring MRs Prevent userspace from deregistering the MRs that back QP/CQ/SRQ rings by bumping the MR's refcount upon association.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/bng_re: return a timeout when firmware responses stall __wait_for_resp() documents thCVE-2026-93153 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/bng_re: return a timeout when firmware responses stall __wait_for_resp() documents that it returns a non-zero error when a firmware command does not complete, and bng_re_rcfw_send_message() already marks the firmware as stalled when the helper returns -ENODEV. However, the helper ignores wait_event_timeout() expiry. If the response slot remains in use after the timeout and after the polled CREQ service attempt, the loop starts another full timeout period and can repeat forever. Return -ENODEV after a timed out wait that still has no response. The existing caller then marks FIRMWARE_STALL_DETECTED and returns -ETIMEDOUT to the command issuer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix response resource leak on queue teardown When an nvme target with rdma traCVE-2026-93151 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: fix response resource leak on queue teardown When an nvme target with rdma transport is removed while I/Os are in flight, a response can be posted but its send completion is never delivered before the connection is torn down. As a result nvmet_rdma_send_done() and nvmet_rdma_release_rsp() are never called for the response, and this leaks the allocated RDMA read/write context and request SGLs. These leaks are recreated by running blktests nvme/061 with the rdma transport and the siw driver. Kernel kmemleak feature reports them as follows: unreferenced object 0xffff88812bc490c0 (size 32): comm "kworker/2:1H", pid 409, jiffies 4307744490 backtrace (crc 89afd339): __kmalloc_noprof+0x5f9/0x890 sgl_alloc_order+0x7b/0x380 nvmet_req_alloc_sgls+0x290/0x4f0 [nvmet] nvmet_rdma_map_sgl_keyed+0x241/0x12e0 [nvmet_rdma] nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma] __ib_process_cq+0x149/0x4c0 [ib_core] ib_cq_poll_work+0x49/0x160 [ib_core] process_one_work+0x8b2/0x1640 worker_thread+0x5fd/0xfe0 kthread+0x367/0x460 ret_from_fork+0x655/0

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Wait for RCU callbacks before unloading ib_core put_gid_ndev() is queued with cCVE-2026-93110 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Wait for RCU callbacks before unloading ib_core put_gid_ndev() is queued with call_rcu() and implemented in ib_core. Stopping the workqueues does not drain callbacks already queued, so RCU could invoke it after the module code has been unloaded. synchronize_rcu() does not wait for callbacks. Wait for them after all producers have stopped.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Drain RCU callbacks during module teardown devx_free_subscription() can remain CVE-2026-93109 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Drain RCU callbacks during module teardown devx_free_subscription() can remain queued after the last DevX event file drops its module reference or an auxiliary driver detaches its devices. mlx5_ib can then unload before the callback runs. Registration error unwind has the same risk because driver registration can attach existing devices before failing. Wait after all drivers have stopped.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Drain RCU callbacks during module teardown IPoIB reclamation completions can bCVE-2026-93108 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Drain RCU callbacks during module teardown IPoIB reclamation completions can be signaled from inside an RCU callback. Teardown can wake before the callback returns and unload ib_ipoib while its code is still executing. Client registration failure can also remove already-added devices and queue callbacks. Wait after client and workqueue teardown.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state When dCVE-2026-93107 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.2

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state When do_complete() finds the QP in the error state it returns RESPST_CHK_RESOURCE. Before commit 49dc9c1f0c7e ("RDMA/rxe: Cleanup reset state handling in rxe_resp.c") this was the flush loop: check_resource() had an error-state branch that fetched each remaining recv WQE and completed it with IB_WC_WR_FLUSH_ERR, without touching the current packet. That commit removed the error-state branch from check_resource() (draining is now done at rxe_receiver() entry) but kept the do_complete() error-state return. As a result, when a QP moves to the error state while a packet is being completed - e.g. an rdma_cm disconnect racing with receive processing - the responder state machine loops back into the request processing chain with the already-completed packet still in hand: check_resource() fetches a fresh recv WQE, execute()/send_data_in() copies the same packet payload again, do_complete() posts another IB_WC_SUCCESS CQE (qp->resp.status is still 0), and control returns to the error-state check. The loop re-executes the same packet o

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rvt: Return NULL after port allocation failure rvt_alloc_device() deallocates the IB CVE-2026-93104 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rvt: Return NULL after port allocation failure rvt_alloc_device() deallocates the IB device when its port array cannot be allocated but then returns the pointer to the released allocation. Callers treat any non-NULL value as valid and dereference it, resulting in a use-after-free. Return NULL immediately after deallocation so callers can propagate the allocation failure.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Preserve unit 0 on allocation failure hfi1_free_devdata() assumes that the deviCVE-2026-93103 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Preserve unit 0 on allocation failure hfi1_free_devdata() assumes that the device was inserted into the unit table and unconditionally erases dd->unit. If xa_alloc_irq() fails, the zero-initialized unit remains zero, so full cleanup can remove an unrelated device from index 0. Release only the rdmavt allocation and return immediately while the unit table has not acquired the device.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Free RX data on late probe failure hfi1_init_dd() allocates the shared AIP/VNICCVE-2026-93102 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Free RX data on late probe failure hfi1_init_dd() allocates the shared AIP/VNIC RX support before returning. If hfi1_init() or hfi1_register_ib_device() later fails, init_one() tears down the device data without calling hfi1_free_rx(). This leaks netdev_rx and its dummy netdev. Free the RX support after IB unregistration and before postinit_cleanup(), as done on normal device removal.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Propagate sdma_txinit_ahg() errors set_txreq_header_ahg() ignores the return vaCVE-2026-93037 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Propagate sdma_txinit_ahg() errors set_txreq_header_ahg() ignores the return value of sdma_txinit_ahg(). If sdma_txinit_ahg() fails, it returns before initializing tx->txreq. However, set_txreq_header_ahg() ignores the error and returns the AHG change count, causing the caller to continue processing the request as though initialization had succeeded. Propagate sdma_txinit_ahg() failures to the caller and abort request processing when initialization fails. Found by Linux Verification Center (linuxtesting.org) with SVACE.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[] For a user QP, qp->sq.quCVE-2026-92525 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[] For a user QP, qp->sq.queue is a ring the application writes directly, so rxe_post_send() takes the is_user branch and only schedules send_task without validating the WQE. rxe_requester() consumes it in place via req_next_wqe() and calls copy_data(), which indexes &wqe->dma.sge[cur_sge] with the attacker-controlled num_sge/cur_sge. Only the kernel path bounds num_sge (validate_send_wr()); the user WQE is never checked, so a local unprivileged user can post a WQE with an out-of-range cur_sge or oversized num_sge and force an out-of-bounds read of the per-WQE sge array in copy_data() (vmalloc OOB read, local DoS). Bound num_sge to qp->sq.max_sge in rxe_requester() before use, the way get_srq_wqe() already guards SRQ entries, and bound cur_sge only when the WQE carries payload (dma.resid): copy_data() returns early on a zero-length copy before touching dma->sge[], so a zero-payload WQE -- the only kind a max_sge == 0 QP can post -- stays valid. Reproduced under KASAN; the vmalloc-out-of-bounds in copy_data() is gone.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: validate dynamic counter attribute length RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is aCVE-2026-92523 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: validate dynamic counter attribute length RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is a nested attribute whose children are consumed directly with nla_get_u32(). The top-level policy validates only the container, so it does not establish the fixed shape of each child. Require every child payload to be exactly one u32 before reading it.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Fix CEQ tasklet use-after-free on removal Each CEQ interrupt handler only scheCVE-2026-92514 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Fix CEQ tasklet use-after-free on removal Each CEQ interrupt handler only schedules eqc->tasklet. The tasklet calls erdma_ceq_completion_handler(), which reads the DMA-coherent EQ ring through get_next_valid_eqe() and updates eq->dbrec through notify_eq(). erdma_ceqs_uninit() frees each CEQ IRQ and then destroys its EQ. free_irq() prevents another hard IRQ and waits for an in-flight handler, but it does not drain a tasklet that the handler already scheduled. The tasklet can therefore access eq->qbuf or eq->dbrec after erdma_eq_destroy() frees them. Clearing ceq_cb->ready does not synchronize with a tasklet that already passed the check at the start of erdma_ceq_completion_handler(). Kill the tasklet after free_irq(), when no handler can schedule it again, and before erdma_ceq_uninit_one() releases the EQ buffers.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: drain QP references after partial table insertion mana_table_store_ud_qp() pCVE-2026-92513 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: drain QP references after partial table insertion mana_table_store_ud_qp() publishes a QP at its send-queue id before inserting the receive-queue id, dropping the XArray lock between the two xa_insert_irq() calls. A concurrent completion handler can look up the QP and take a transient reference. When the second insertion fails, the rollback erased only the send-queue entry and returned, leaving both the initial table reference and the transient reference outstanding while RDMA core frees the QP, causing a use-after-free. Drain the reference as normal destruction does: drop the initial reference and wait for qp->free, releasing the QP only after every concurrent lookup returns its reference.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.