Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
79 results · page 1 of 2
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: cipso: adjust cached option offsets when removing CIPSO cipso_v4_skbuff_delattr() removes CVE-2026-99064 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1
In the Linux kernel, the following vulnerability has been resolved: cipso: adjust cached option offsets when removing CIPSO cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust cached offsets for options that follow them. For example, with a valid 10-byte CIPSO option followed by a seven-byte RR option, parsing records rr at offset 30. Removing CIPSO moves RR to offset 20, while the cached offset remains 30. Consumers such as ip_forward_options() and __ip_options_echo() then access the wrong bytes; the latter may interpret packet data as the option length and copy it into fixed-size option storage. Mirror cipso_v4_delopt() and subtract cipso_len from the srr, rr, ts and router_alert offsets when they follow CIPSO. cipso_len is the distance the first memmove() shifts those options. The later header move and network-header reset relocate the bytes and their offset base together.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: drm/xe: harden adjust_idledly() against divide-by-zero and overflow adjust_idledly() has sCVE-2026-98919 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/xe: harden adjust_idledly() against divide-by-zero and overflow adjust_idledly() has several corner-case issues flagged during review: 1. If xe_gt_clock_init() failed to recognise the crystal clock, gt->info.timestamp_base is 0, which makes idledly_units_ps also 0. The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a divide-by-zero and panics the kernel. 2. The tick-to-ns conversions are done in u32: idledly * idledly_units_ps, (maxcnt - 1) * 1000 Both overflow u32 before DIV_ROUND_CLOSEST() sees them. 3. If IDLE_WAIT_TIME reads back as 0, maxcnt evaluates to 0 and the maxcnt - 1 clamp wraps to 0xFFFFFFFF in u32. 4. The register only stores whole ticks, so the clamped ns value has to be converted to ticks and back. DIV_ROUND_CLOSEST() can round that conversion up past maxcnt: maxcnt = 640 ns, one tick = 666664 ps clamp: maxcnt - 1 = 639 ns ns -> ticks: 639000 / 666664 = 0.958 -> rounds to 1 tick tick -> ns: 1 * 666664 / 1000 = 667 ns 667 ns is programmed into RING_IDLEDLY, but 667 >= max
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 20, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-113731 · Other software · djust-org · reported by GitHubLow 3.3
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. From 0.9.0 until 1.0.10, 1.1.7, 1.2.4, and 1.3.0rc8, the find_handlers_for_template MCP tool in python/djust/mcp/server.py accepts an existing absolute template_path and reads it without restricting the resolved path to the project or configured template directories. A local MCP client can use the tool as a file existence and readability oracle and can obtain substrings that match the tool's dj-click, dj-submit, dj-change, dj-input, dj-keydown, or dj-keyup attribute pattern from files readable by the djust process. The maintainer assessment states that the MCP server communicates over local stdio as the same operating-system user and has no network listener, and the tool does not return arbitrary raw file contents. This issue is fixed in versions 1.0.10, 1.1.7, 1.2.4, and 1.3.0rc8.
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: swiotlb: use the adjusted address for the highmem page lookup swiotlb_bounce() reads the pCVE-2026-98254 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: swiotlb: use the adjusted address for the highmem page lookup swiotlb_bounce() reads the page frame number from the slot's recorded orig_addr, then advances orig_addr by tlb_offset to reach the address the caller asked about. The highmem branch mixes the two: the offset within the page comes from the adjusted address, the page from the value before it. Once the adjustment crosses a page boundary the pair no longer describes one location, and the whole copy lands one page below the intended one for a positive tlb_offset, one above for a negative one. DMA_FROM_DEVICE writes the device data over the wrong page and leaves the intended one stale, DMA_TO_DEVICE feeds the device from a page the mapping may not cover. Partial syncs through dma_sync_single_range_for_*() are what make tlb_offset non-zero. The branch test is picked the same way, so a slot recorded in lowmem can be adjusted into highmem and the lowmem path then hands a highmem address to phys_to_virt(). Take both from orig_addr once it is final and keep pfn in the branch that uses it. PhysHighMem() asks the question straight from the address, as dma-debug
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: accurately adjust free_sections during free_segment_range In free_segment_range(), MCVE-2026-97534 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: f2fs: accurately adjust free_sections during free_segment_range In free_segment_range(), MAIN_SECS(sbi) is temporarily reduced by `secs` to restrict block allocation to the safe remaining main area while valid blocks in the truncated range are evacuated by GC. However, FREE_I(sbi)->free_sections tracks the total number of free sections across the whole filesystem. If any sections within the truncated range were already free upon entering free_segment_range(), failing to deduct them from free_sections causes the filesystem to overestimate available free sections in the active, reduced main area. This leads to inconsistent free section accounting during GC data migration and can trigger unexpected allocation failures or assertion errors when space is tight. Fix this by calculating the number of already-free sections in the truncated range, deducting them from free_sections upon entering free_segment_range(), and restoring them on exit.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-61599 · Other software · djust-org · reported by GitHubHigh 8.8
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, the djust live transport resolves the LiveView to mount from a client-supplied dotted path by calling `__import__(module_path, ...)`. The module is imported — running its top-level code (import side effects) — before the framework checks that the resolved object is a `LiveView` subclass and before any per-view authentication. The `LIVEVIEW_ALLOWED_MODULES` allowlist that should contain this is fail-open (`if allowed_modules:` — skipped when the setting is unset, the framework default) and uses loose `startswith` matching. An unauthenticated WebSocket client (the WS handshake does not require auth; per-view auth runs only after import + instantiate) can therefore send a `mount` / `live_redirect_mount` / `url_change` frame (or an SSE mount) with `view = "<any.importable.module>.AnyName"` and cause the server to import — and execute the top-level code of — any importable Python module by name. Version 1.0.7 fixes the issue with a fail-closed resolution gate (`djust._view_resolution.is_view_import_allowed`): a client view path resolves only if (a) its m
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-61596 · Other software · djust-org · reported by GitHubHigh 7.1
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, djust's per-object authorization (`get_object` + `has_object_permission`, ADR-017) was enforced on the WebSocket mount and event paths but not on three other render entry points: (a) the initial HTTP GET render, (b) SPA `url_change` navigation, and (c) `{% live_render %}` embedded child views. An authenticated user could therefore view (and on some paths act on) an object they are not authorized for by loading the page directly, navigating to it via SPA url-change, or composing it as an embedded child — a classic IDOR / broken object-level access control on object-scoped views. This is fixed in djust 1.0.7. All render entry points now route through a shared `enforce_object_permission` chokepoint: HTTP GET returns 403, `url_change` emits a `permission_denied` frame and skips the render, and `{% live_render %}` (eager + lazy) refuses the embed. Views without a custom `get_object` are unaffected (no-op). No reliable workaround short of upgrading. Do not expose object-scoped views through the HTTP-GET / url_change / live_render paths until patched.
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-61589 · Other software · djust-org · reported by GitHubMedium 6.3
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, the WebSocket `handle_mount` and `ViewRuntime._build_request` rebuild an `HttpRequest` via `RequestFactory().get(...)` with no `HTTP_HOST`, so `request.get_host()` defaulted to `"testserver"` on the live path. Host/subdomain/domain `TenantResolver`s then misresolved the tenant — `None` on the live path while the HTTP path resolved correctly. With `STRICT_MODE=False` the tenant-scoped managers returned unscoped rows (cross-tenant disclosure); with the default they returned an empty queryset (broken tenancy). This is fixed in djust 1.0.7. The handshake Host is extracted from the ASGI scope, validated against `ALLOWED_HOSTS` (the same logic as the CSWSH Origin gate, parsed with Django's `split_domain_port` so malformed Hosts are rejected at the boundary), and propagated — with the TLS scheme — into the reconstructed request, so live-path tenant resolution matches HTTP exactly. There is no known workaround on the live path short of upgrading. Users are most exposed when combined with `STRICT_MODE=False`.
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-61588 · Other software · djust-org · reported by GitHubMedium 6.5
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, when a Django `Model` instance is assigned to a public view attribute, djust serialized it to the client with no sensitive-field denylist — sending fields such as `password` (the hash), privilege flags (e.g. `is_staff` / `is_superuser`), tokens, and other PII to the browser. Because exposing model objects to templates is a normal djust pattern, this could leak credentials/PII without the developer realizing the full object crossed the wire. This is fixed in djust 1.0.7. Model serialization applies a secure-by-default sensitive-field denylist (password/hash/token/secret-style fields and known privilege flags are withheld) with an identity-subset fallback. As a workaround, keep `Model` instances on `_private` attributes and expose only the specific fields needed, until patched.
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-61597 · Other software · djust-org · reported by GitHubMedium 5.1
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, many djust built-in component template tags (`djust.components.templatetags.*`) render a developer/user-supplied URL into an `href` / `action` attribute, HTML-escaping it with `conditional_escape` but never validating the URL scheme. HTML escaping prevents attribute breakout but does not neutralize a `javascript:` URI (which needs no escapable characters), so a URL value of `javascript:alert(document.cookie)` lands verbatim in `<a href="javascript:alert(document.cookie)">` and executes in the victim's session on click. Version 1.0.7 contains a fix. As a workaround, do not pass user-controllable URLs to the affected built-in component tags; pre-validate URL schemes in application code before binding them to component arguments.
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-61594 · Other software · djust-org · reported by GitHubCritical 9.1
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, the live (WebSocket) transport authorizes a mount via `check_view_auth`, not Django's `View.dispatch()` chain. As a result, standard Django authorization — `LoginRequiredMixin`, `PermissionRequiredMixin`, `UserPassesTestMixin`, `@method_decorator(login_required, name="dispatch")`, and custom `dispatch()` guards — and the djust admin extension's staff gate (applied only in the HTTP `as_view` wrapper) were enforced on the initial HTTP GET but silently bypassed over WebSocket, where all events and state flow. An anonymous or under-privileged client could open a WebSocket and mount such a view — including admin list/create/change/delete — and dispatch its handlers. This is fixed in djust 1.0.7. `check_view_auth` now honors the Django `AccessMixin` family on every transport; a new system check S004 fails loud at startup on auth patterns the runtime cannot safely replay (decorator/overridden-`dispatch` forms); and the admin base mixin declares `login_required = True` + an active-staff `check_permissions` gate. As a workaround, gate views using djust's `lo
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-61592 · Other software · djust-org · reported by GitHubHigh 7.4
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, SSE sessions were keyed solely by a client-chosen `session_id` with no binding to the authenticated user — a control the WebSocket transport has but that was dropped on SSE. An attacker who learns (or a victim who leaks) a `session_id` could connect to the message endpoint and dispatch event handlers that execute with the victim's identity and state. This is fixed in djust 1.0.7. Each SSE session is bound to its owning principal at creation and cross-principal access is rejected; SSE session creation is additionally capped per principal. As a workaround, disable the SSE transport.
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-61591 · Other software · djust-org · reported by GitHubHigh 8.1
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, for views that opt into state snapshots, the snapshot `state_json` embedded in the client page was restored on reconnect as trusted view state with no integrity check. A client could edit the unsigned `state_json` in their page and return it in the reconnect mount frame to inject arbitrary view attributes — e.g. flip `is_admin` to `True`, or change `account_id` / `balance` — escalating privilege or tampering with business state held in public view attributes (the normal djust pattern). This issue is fixed in djust 1.0.7. State snapshots are signed; unsigned or forged snapshots are rejected on the back-navigation restore path. As a workaround, do not enable state snapshots; do not hold authorization/ownership state in public view attributes.
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-61595 · Other software · djust-org · reported by GitHubHigh 7.7
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, `djust.tenants` isolation was enforced only on the HTTP path. The current tenant was stored in `threading.local()` and set exclusively by the HTTP-only `TenantMiddleware`, so on the live (WebSocket/SSE) path `get_current_tenant()` was always `None` during mount and every event handler — and the tenant-aware `QuerySet` manager failed OPEN (returned the unfiltered queryset, ignoring `STRICT_MODE`), disclosing every tenant's rows to whoever held the socket. `threading.local` was additionally shared across connections on the `sync_to_async` executor thread. This issue is fixed in djust 1.0.7. Tenant storage moved to a `contextvars.ContextVar` (per async task); the resolved tenant is bound around WS/SSE mount and every dispatch; both managers scope the base queryset once and fail CLOSED (`.none()` under the default `STRICT_MODE`); and system check S006 warns when `STRICT_MODE=False`. No known workarounds are available on the live path.
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-61593 · Other software · djust-org · reported by GitHubHigh 8.1
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, the SSE client→server POST endpoints are `@csrf_exempt` and the SSE GET stream endpoint had no Origin check, so a cross-origin page could drive a victim-cookie-authenticated SSE session: force the victim's browser to GET the stream URL (which creates and mounts a LiveView as the victim) and POST to the message endpoint with `credentials: include` to fire state-changing event handlers as the victim. The URL `session_id` is client-chosen (validated only for UUID *format*), so it is not a CSRF token, and a JSON body sent as `text/plain` is a CORS simple request with no preflight. The issue is fixed in 1.0.7. All three SSE endpoints validate the request `Origin` against `ALLOWED_HOSTS` (mirroring the WebSocket CSWSH defense) and reject cross-origin requests with 403; the POST endpoints additionally require `Content-Type: application/json` (415 otherwise), closing the `text/plain` simple-request bypass. As a workaround, disable the SSE transport, or front it with a proxy that enforces an Origin allowlist.
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-61598 · Other software · djust-org · reported by GitHubHigh 7.1
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, `djust.mixins.model_binding.ModelBindingMixin` provides a default `update_model` event handler and is part of the LiveView base MRO, so every LiveView exposes it. It `setattr`s a view attribute whose name is client-supplied (`field`), gated only by: reject `_`-prefixed names; reject a 14-entry denylist of framework internals (`FORBIDDEN_MODEL_FIELDS`); optional `allowed_model_fields` which defaults to None = allow all; and `hasattr` existence. As a result, a client can set any public, existing view attribute — not just the fields actually bound with `dj-model=` in the rendered template. The denylist covers framework plumbing but nothing about developer business/authz state, and the allowlist is opt-in (off by default). A developer who binds one `dj-model="search"` input and also keeps `self.account_id` / `self.is_admin` / `self.total_price` as view state does not realize a client can set ALL of them via `{type:event, event:"update_model", params:{field, value}}` over the WebSocket. Type coercion matches the target attribute's type (so `"true"` -> bo
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-61590 · Other software · djust-org · reported by GitHubHigh 7.4
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, djust's observability endpoints expose live view/session state and a remote method-invocation surface (`eval_handler`). The localhost restriction was an opt-in middleware that the documented setup omits; the views themselves enforced only `DEBUG`. In the misconfigured-but-documented scenario (DEBUG on, middleware not installed) a non-localhost client could read live application state and invoke handlers remotely. This issue is fixed in djust 1.0.7. The localhost restriction is enforced in-view on every observability endpoint (no longer dependent on a separately-installed middleware), and `eval_handler` is restricted; gated requests receive a non-disclosing response. As a workaround, ensure `DEBUG=False` in production, and do not expose the observability endpoints to untrusted networks.
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 14, 2026Description The setuid-root `worker-launcher` binary adjusts ownership and permissions of worker directories by walking the tree with FTS and calling `lchown` CVE-2026-82429 · Websites & servers · Apache Software Foundation · reported by security@apache.orgHigh 7.8
Description The setuid-root `worker-launcher` binary adjusts ownership and permissions of worker directories by walking the tree with FTS and calling `lchown` and `chmod` on each entry's full pathname while running with an effective uid of 0. Both syscalls re-resolve the path at the time of the call, after FTS has classified the entry, and the trees being walked are owned and writable by the untrusted topology user. A tenant running code on a supervisor node could therefore replace an intermediate directory component with a symbolic link between classification and the privileged operation, redirecting the root-owned `lchown` or `chmod` at an arbitrary file on the host. The operation is repeatable at will, since crashing a worker forces a relaunch and blob updates re-run the walk, so a failed attempt costs the attacker nothing. This crosses the boundary that `supervisor.run.worker.as.user` and container isolation are intended to enforce. It is the same defect class as the Hadoop container-executor issues from which this code derives. Mitigation Upgrade to 3.1.0, where the privileged walk operates on file descriptors it has already stat'd rather than on pathnames re-resolved at
- Product
- Apache Storm Worker Launcher
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordlists.apache.orgopenwall.com
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: hugetlb: only adjust reservation during unmapping if mapcount is 0 Since df7a6d1f6405, __uCVE-2026-89593 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: hugetlb: only adjust reservation during unmapping if mapcount is 0 Since df7a6d1f6405, __unmap_hugepage_range can adjust reservations. In the case of folio mapped in both a parent and a child, if the parent unmaps the range first, the reservation adjustment will result in an underflow of the reserved count. Once the child unmaps the range, the count is restored. Change __unmap_hugepage_range() to check the mapcount before adjusting the reservation.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 28, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: fix unaligned memory access in timestamp adjustment Use get_unalignedCVE-2026-80637 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: fix unaligned memory access in timestamp adjustment Use get_unaligned_be32() and put_unaligned_be32() to safely read and write the timestamp fields. This prevents performance degradation due to unaligned memory access or even a crash on strict alignment architectures. This follows the implementation of timestamp parsing in the networking stack at tcp_parse_options() and synproxy_parse_options().
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 25, 2026djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance.CVE-2026-55571 · Other software · djust-org · reported by GitHubHigh 8.2
djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to 1.0.4, LiveViewConsumer.handle_mount sends a `{"type":"navigate","to":...}` frame when login_required, permission_required, or a redirecting on_mount hook denies a LiveView mount, but returns without closing the WebSocket or clearing self.view_instance. A browser follows the redirect, but a raw WebSocket client can ignore it and retain the mounted socket. Because LiveViewConsumer.handle_event does not recheck authentication or authorization, the client can send `{"type":"event",...}` frames that invoke @event_handler methods without an authenticated session, including through handle_live_redirect_mount, enabling unauthorized sensitive reads or mutations. This issue is fixed in version 1.0.4.
- Product
- djust
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net: fix skb length accounting after generic XDP frag adjustment Generic XDP exposes non-lCVE-2026-74665 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1
In the Linux kernel, the following vulnerability has been resolved: net: fix skb length accounting after generic XDP frag adjustment Generic XDP exposes non-linear skb fragments through an xdp_buff. If an XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies xdp_frags_size back to skb->data_len but leaves skb->len containing the old fragment contribution. After a fragment shrink, this makes skb_headlen() larger than the actual linear area. In the reproduced UDP receive path, __skb_datagram_iter() copied 1024 bytes past the actual linear tail to userspace, starting at struct skb_shared_info. The copied bytes included the affected skb's nr_frags, xdp_frags_size and a kernel pointer from skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same amount and truncated at the end. Subtract the old data_len before replacing it and add the new data_len afterwards, keeping skb->len and skb->data_len synchronized. A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by 1024 bytes from its fragment area. Before the fix, all 10 runs produced corrupted payloads. After the fix, all 10 runs matched the expected payload exactly.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: veth: fix skb length accounting after XDP frag adjustment veth exposes non-linear skb fragCVE-2026-74612 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 10
In the Linux kernel, the following vulnerability has been resolved: veth: fix skb length accounting after XDP frag adjustment veth exposes non-linear skb fragments through an xdp_buff. If an XDP program adjusts the fragment area, veth_xdp_rcv_skb() copies xdp_frags_size back to skb->data_len but leaves skb->len containing the old fragment contribution. After a fragment shrink, this makes skb_headlen() larger than the actual linear area. In the reproduced UDP receive path, __skb_datagram_iter() copied 1024 bytes past the actual linear tail to userspace, starting at struct skb_shared_info. The copied bytes included the affected skb's nr_frags, xdp_frags_size, and a kernel pointer from skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same amount and truncated at the end. Subtract the old data_len before replacing it and add the new data_len afterwards, keeping skb->len and skb->data_len synchronized. Additionally, bpf_xdp_pull_data() can advance data_end while leaving frags present. The skb is then still non-linear, so the old __skb_put(skb, off) triggers SKB_LINEAR_ASSERT(). Use skb_set_tail_pointer() and update skb->len explicitly instead, following bpf_prog_ru
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Adjust size for copy_to_user() The amount of data returned to user space shCVE-2026-74419 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.3
In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Adjust size for copy_to_user() The amount of data returned to user space should be limited by the buffer size provided by the application. If the buffer is smaller than the data size, return only the portion that fits instead of failing.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag nf_ct_frag6_rCVE-2026-72250 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6 fragment header and then unconditionally advances skb->mac_header: skb->mac_header += sizeof(struct frag_hdr); On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7), after which skb_mac_header_was_set() wrongly reports a MAC header is present and skb_mac_header() points into the headroom. The reassembler has done this unconditional add since it was introduced; it was harmless while mac_header was a bare pointer, but wrong once mac_header became a u16 offset whose unset state is the ~0U sentinel tested by skb_mac_header_was_set(). The sibling net/ipv6/reassembly.c does the same relocation and does guard the adjustment; mirror the guard here.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: ila: reload IPv6 header after pskb_may_pull in checksum adjust ila_csum_adjust_transport()CVE-2026-68127 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8
In the Linux kernel, the following vulnerability has been resolved: ila: reload IPv6 header after pskb_may_pull in checksum adjust ila_csum_adjust_transport() caches ip6h = ipv6_hdr(skb) before calling pskb_may_pull(). On a non-linear skb whose transport header sits in a page fragment, pskb_may_pull() can call __pskb_pull_tail() / pskb_expand_head() and free the old skb head, leaving ip6h dangling; the following get_csum_diff(ip6h, p) then reads freed memory. ila_update_ipv6_locator() uses ip6h (and the iaddr derived from it) again after the csum-adjust call and additionally writes the new locator through that pointer. Impact: a remote IPv6 packet routed through a configured ILA csum-adjust-transport route or receive-side mapping triggers a slab-use-after-free in ila_update_ipv6_locator() (KASAN). The route or mapping requires CAP_NET_ADMIN to configure, but trigger packets are unauthenticated once it exists. Reload ip6h after each pskb_may_pull() in ila_csum_adjust_transport() before the csum-diff read. In ila_update_ipv6_locator() only the ILA_CSUM_ADJUST_TRANSPORT case pulls the skb, so reload ip6h and iaddr in that case alone before the destination-address write; the neutra
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Jul 19, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: refresh tcphdr after skb_ensure_writable synproxy_tstamp_adjust() rewCVE-2026-64007 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8
In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: refresh tcphdr after skb_ensure_writable synproxy_tstamp_adjust() rewrites the TCP timestamp option in place and then patches the TCP checksum via inet_proto_csum_replace4() on the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and ipv6_synproxy_hook() obtain that pointer with skb_header_pointer() before calling in, so it may either alias skb->head directly or point at the caller's on-stack _tcph buffer. Between obtaining the pointer and using it, the function calls skb_ensure_writable(skb, optend), which on a cloned or non-linear skb invokes pskb_expand_head() and frees the old skb->head. After that point the cached th is stale: caller (ipv[46]_synproxy_hook) th = skb_header_pointer(skb, ..., &_tcph) synproxy_tstamp_adjust(skb, protoff, th, ...) skb_ensure_writable(skb, optend) pskb_expand_head() /* kfree(old skb->head) */ ... inet_proto_csum_replace4(&th->check, ...) /* writes into freed head, or into the caller's stack copy
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
May 19, 2026The adjustments made for XSA-379 as well as those subsequently becoming XSA-387 still left a race window, when a HVM or PVH guest does a grant table version chaCVE-2026-23558 · Other software · Xen · reported by security@xen.orgHigh 7.8
The adjustments made for XSA-379 as well as those subsequently becoming XSA-387 still left a race window, when a HVM or PVH guest does a grant table version change from v2 to v1 in parallel with mapping the status page(s) via XENMEM_add_to_physmap. Some of the status pages may then be freed while mappings of them would still be inserted into the guest's secondary (P2M) page tables.
- Product
- Xen
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordxenbits.xenproject.orgopenwall.com
May 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35 [Why] A baCVE-2026-43191 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35 [Why] A backport of the change made for DCN401 that addresses an issue where we turn off the PHY PLL when disabling TMDS output, which causes the OTG to remain stuck. The OTG being stuck can lead to a hang in the DCHVM's ability to ACK invalidations when it thinks the HUBP is still on but it's not receiving global sync. The transition to PLL_ON needs to be atomic as there's no guarantee that the thread isn't pre-empted or is able to complete before the IOMMU watchdog times out. [How] Backport the implementation from dcn401 back to dcn35. There's a functional difference in when the eDP output is disabled in dcn401 code so we don't want to utilize it directly.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
May 6, 2026In the Linux kernel, the following vulnerability has been resolved: xfs: fix freemap adjustments when adding xattrs to leaf blocks xfs/592 and xfs/794 both trCVE-2026-43158 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: xfs: fix freemap adjustments when adding xattrs to leaf blocks xfs/592 and xfs/794 both trip this assertion in the leaf block freemap adjustment code after ~20 minutes of running on my test VMs: ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t) + xfs_attr3_leaf_hdr_size(leaf)); Upon enabling quite a lot more debugging code, I narrowed this down to fsstress trying to set a local extended attribute with namelen=3 and valuelen=71. This results in an entry size of 80 bytes. At the start of xfs_attr3_leaf_add_work, the freemap looks like this: i 0 base 448 size 0 rhs 448 count 46 i 1 base 388 size 132 rhs 448 count 46 i 2 base 2120 size 4 rhs 448 count 46 firstused = 520 where "rhs" is the first byte past the end of the leaf entry array. This is inconsistent -- the entries array ends at byte 448, but freemap[1] says there's free space starting at byte 388! By the end of the function, the freemap is in worse shape: i 0 base 456 size 0 rhs 456 count 47 i 1 base 388 size 52 rhs 456 count 47 i 2 base 2120 size 4 rhs 456 count 47 firstused = 440 Important note: 388 is not aligned with t
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
May 1, 2026In the Linux kernel, the following vulnerability has been resolved: drm/i915/dsi: Don't do DSC horizontal timing adjustments in command mode Stop adjusting thCVE-2026-31767 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: drm/i915/dsi: Don't do DSC horizontal timing adjustments in command mode Stop adjusting the horizontal timing values based on the compression ratio in command mode. Bspec seems to be telling us to do this only in video mode, and this is also how the Windows driver does things. This should also fix a div-by-zero on some machines because the adjusted htotal ends up being so small that we end up with line_time_us==0 when trying to determine the vtotal value in command mode. Note that this doesn't actually make the display on the Huawei Matebook E work, but at least the kernel no longer explodes when the driver loads. (cherry picked from commit 0b475e91ecc2313207196c6d7fd5c53e1a878525)
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Apr 1, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Only WARN in direct MMUs when overwriting shadow-present SPTE Adjust KVM's sCVE-2026-23402 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Only WARN in direct MMUs when overwriting shadow-present SPTE Adjust KVM's sanity check against overwriting a shadow-present SPTE with a another SPTE with a different target PFN to only apply to direct MMUs, i.e. only to MMUs without shadowed gPTEs. While it's impossible for KVM to overwrite a shadow-present SPTE in response to a guest write, writes from outside the scope of KVM, e.g. from host userspace, aren't detected by KVM's write tracking and so can break KVM's shadow paging rules. ------------[ cut here ]------------ pfn != spte_to_pfn(*sptep) WARNING: arch/x86/kvm/mmu/mmu.c:3069 at mmu_set_spte+0x1e4/0x440 [kvm], CPU#0: vmx_ept_stale_r/872 Modules linked in: kvm_intel kvm irqbypass CPU: 0 UID: 1000 PID: 872 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:mmu_set_spte+0x1e4/0x440 [kvm] Call Trace: <TASK> ept_page_fault+0x535/0x7f0 [kvm] kvm_mmu_do_page_fault+0xee/0x1f0 [kvm] kvm_mmu_page_fault+0x8d/0x620 [kvm] vmx_handle_exit+0x18c/0x5a0 [kvm_intel
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Feb 4, 2026In the Linux kernel, the following vulnerability has been resolved: timekeeping: Adjust the leap state for the correct auxiliary timekeeper When __do_ajdtimexCVE-2026-23106 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: timekeeping: Adjust the leap state for the correct auxiliary timekeeper When __do_ajdtimex() was introduced to handle adjtimex for any timekeeper, this reference to tk_core was not updated. When called on an auxiliary timekeeper, the core timekeeper would be updated incorrectly. This gets caught by the lock debugging diagnostics because the timekeepers sequence lock gets written to without holding its associated spinlock: WARNING: include/linux/seqlock.h:226 at __do_adjtimex+0x394/0x3b0, CPU#2: test/125 aux_clock_adj (kernel/time/timekeeping.c:2979) __do_sys_clock_adjtime (kernel/time/posix-timers.c:1161 kernel/time/posix-timers.c:1173) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:131) Update the correct auxiliary timekeeper.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Jan 13, 2026In the Linux kernel, the following vulnerability has been resolved: iomap: adjust read range correctly for non-block-aligned positions iomap_adjust_read_rangeCVE-2025-68794 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8
In the Linux kernel, the following vulnerability has been resolved: iomap: adjust read range correctly for non-block-aligned positions iomap_adjust_read_range() assumes that the position and length passed in are block-aligned. This is not always the case however, as shown in the syzbot generated case for erofs. This causes too many bytes to be skipped for uptodate blocks, which results in returning the incorrect position and length to read in. If all the blocks are uptodate, this underflows length and returns a position beyond the folio. Fix the calculation to also take into account the block offset when calculating how many bytes can be skipped for uptodate blocks.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Dec 24, 2025In the Linux kernel, the following vulnerability has been resolved: net: core: remove unnecessary frame_sz check in bpf_xdp_adjust_tail() Syzkaller reported tCVE-2023-54155 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: core: remove unnecessary frame_sz check in bpf_xdp_adjust_tail() Syzkaller reported the following issue: ======================================= Too BIG xdp->frame_sz = 131072 WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 ____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline] WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121 bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103 ... Call Trace: <TASK> bpf_prog_4add87e5301a4105+0x1a/0x1c __bpf_prog_run include/linux/filter.h:600 [inline] bpf_prog_run_xdp include/linux/filter.h:775 [inline] bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721 netif_receive_generic_xdp net/core/dev.c:4807 [inline] do_xdp_generic+0x35c/0x770 net/core/dev.c:4866 tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919 tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043 call_write_iter include/linux/fs.h:1871 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x650/0xe40 fs/read_write.c:584 ksys_write+0x12f/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SY
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Dec 16, 2025In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: add seqadj extension for natted connections Sequence adjustment may be CVE-2025-68206 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: add seqadj extension for natted connections Sequence adjustment may be required for FTP traffic with PASV/EPSV modes. due to need to re-write packet payload (IP, port) on the ftp control connection. This can require changes to the TCP length and expected seq / ack_seq. The easiest way to reproduce this issue is with PASV mode. Example ruleset: table inet ftp_nat { ct helper ftp_helper { type "ftp" protocol tcp l3proto inet } chain prerouting { type filter hook prerouting priority 0; policy accept; tcp dport 21 ct state new ct helper set "ftp_helper" } } table ip nat { chain prerouting { type nat hook prerouting priority -100; policy accept; tcp dport 21 dnat ip prefix to ip daddr map { 192.168.100.1 : 192.168.13.2/32 } } chain postrouting { type nat hook postrouting priority 100 ; policy accept; tcp sport 21 snat ip prefix to ip saddr map { 192.168.13.2 : 192.168.100.1/32 } } } Note that the ftp
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2025In the Linux kernel, the following vulnerability has been resolved: bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer In check_alu_op(), the verifieCVE-2025-40050 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer In check_alu_op(), the verifier currently calls check_reg_arg() and adjust_scalar_min_max_vals() unconditionally for BPF_NEG operations. However, if the destination register holds a pointer, these scalar adjustments are unnecessary and potentially incorrect. This patch adds a check to skip the adjustment logic when the destination register contains a pointer.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 22, 2025In the Linux kernel, the following vulnerability has been resolved: blk-iocost: use spin_lock_irqsave in adjust_inuse_and_calc_cost adjust_inuse_and_calc_costCVE-2023-53730 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: blk-iocost: use spin_lock_irqsave in adjust_inuse_and_calc_cost adjust_inuse_and_calc_cost() use spin_lock_irq() and IRQ will be enabled when unlock. DEADLOCK might happen if we have held other locks and disabled IRQ before invoking it. Fix it by using spin_lock_irqsave() instead, which can keep IRQ state consistent with before when unlock. ================================ WARNING: inconsistent lock state 5.10.0-02758-g8e5f91fd772f #26 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. kworker/2:3/388 [HC0[0]:SC0[0]:HE0:SE1] takes: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 {IN-HARDIRQ-W} state was registered at: __lock_acquire+0x3d7/0x1070 lock_acquire+0x197/0x4a0 __raw_spin_lock_irqsave _raw_spin_lock_irqsave+0x3b/0x60 bfq_idle_slice_timer_body bfq_idle_slice_timer+0x53/0x1d0 __run_hrtimer+0x477/0xa70 __hrtimer_run_queues+0x1c6/0x2d0 hrtimer_interrupt+0x302/0x9e0 local_apic_timer_interrupt __sysvec_apic_timer_i
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 17, 2025The Restaurant Brands International (RBI) assistant platform through 2025-09-06 allows remote attackers to adjust Drive Thru speaker audio volume.CVE-2025-62648 · Other software · Restaurant Brands International · reported by MITREMedium 6.4
The Restaurant Brands International (RBI) assistant platform through 2025-09-06 allows remote attackers to adjust Drive Thru speaker audio volume.
- Product
- assistant platform
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordarchive.todaybobdahacker.com
Sep 17, 2025In the Linux kernel, the following vulnerability has been resolved: skbuff: Account for tail adjustment during pull operations Extending the tail can have somCVE-2022-50365 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: skbuff: Account for tail adjustment during pull operations Extending the tail can have some unexpected side effects if a program uses a helper like BPF_FUNC_skb_pull_data to read partial content beyond the head skb headlen when all the skbs in the gso frag_list are linear with no head_frag - kernel BUG at net/core/skbuff.c:4219! pc : skb_segment+0xcf4/0xd2c lr : skb_segment+0x63c/0xd2c Call trace: skb_segment+0xcf4/0xd2c __udp_gso_segment+0xa4/0x544 udp4_ufo_fragment+0x184/0x1c0 inet_gso_segment+0x16c/0x3a4 skb_mac_gso_segment+0xd4/0x1b0 __skb_gso_segment+0xcc/0x12c udp_rcv_segment+0x54/0x16c udp_queue_rcv_skb+0x78/0x144 udp_unicast_rcv_skb+0x8c/0xa4 __udp4_lib_rcv+0x490/0x68c udp_rcv+0x20/0x30 ip_protocol_deliver_rcu+0x1b0/0x33c ip_local_deliver+0xd8/0x1f0 ip_rcv+0x98/0x1a4 deliver_ptype_list_skb+0x98/0x1ec __netif_receive_skb_core+0x978/0xc60 Fix this by marking these skbs as GSO_DODGY so segmentation can handle the tail updates accordingly.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
May 20, 2025In the Linux kernel, the following vulnerability has been resolved: btrfs: adjust subpage bit start based on sectorsize When running machines with 64k page siCVE-2025-37931 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.3
In the Linux kernel, the following vulnerability has been resolved: btrfs: adjust subpage bit start based on sectorsize When running machines with 64k page size and a 16k nodesize we started seeing tree log corruption in production. This turned out to be because we were not writing out dirty blocks sometimes, so this in fact affects all metadata writes. When writing out a subpage EB we scan the subpage bitmap for a dirty range. If the range isn't dirty we do bit_start++; to move onto the next bit. The problem is the bitmap is based on the number of sectors that an EB has. So in this case, we have a 64k pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4 bits for every node. With a 64k page size we end up with 4 nodes per page. To make this easier this is how everything looks [0 16k 32k 48k ] logical address [0 4 8 12 ] radix tree offset [ 64k page ] folio [ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers [ | | | | | | | | | | | | | | | | ] bitmap Now we use all of our addressing based on fs_info->sectorsize_bits, so as you can see the above our 16k eb->star
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Mar 7, 2025In the Linux kernel, the following vulnerability has been resolved: thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header The intel-lCVE-2025-21840 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header The intel-lpmd tool [1], which uses the THERMAL_GENL_ATTR_CPU_CAPABILITY attribute to receive HFI events from kernel space, encounters a segmentation fault after commit 1773572863c4 ("thermal: netlink: Add the commands and the events for the thresholds"). The issue arises because the THERMAL_GENL_ATTR_CPU_CAPABILITY raw value was changed while intel_lpmd still uses the old value. Although intel_lpmd can be updated to check the THERMAL_GENL_VERSION and use the appropriate THERMAL_GENL_ATTR_CPU_CAPABILITY value, the commit itself is questionable. The commit introduced a new element in the middle of enum thermal_genl_attr, which affects many existing attributes and introduces potential risks and unnecessary maintenance burdens for userspace thermal netlink event users. Solve the issue by moving the newly introduced THERMAL_GENL_ATTR_TZ_PREV_TEMP attribute to the end of the enum thermal_genl_attr. This ensures that all existing thermal generic netlink attributes remain unaffected. [ rjw: Subject edits ]
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals Kuee reported a cCVE-2022-49658 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals Kuee reported a corner case where the tnum becomes constant after the call to __reg_bound_offset(), but the register's bounds are not, that is, its min bounds are still not equal to the register's max bounds. This in turn allows to leak pointers through turning a pointer register as is into an unknown scalar via adjust_ptr_min_max_vals(). Before: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_mi
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Dec 29, 2024In the Linux kernel, the following vulnerability has been resolved: erofs: fix blksize < PAGE_SIZE for file-backed mounts Adjust sb->s_blocksize{,_bits} direcCVE-2024-56750 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: erofs: fix blksize < PAGE_SIZE for file-backed mounts Adjust sb->s_blocksize{,_bits} directly for file-backed mounts when the fs block size is smaller than PAGE_SIZE. Previously, EROFS used sb_set_blocksize(), which caused a panic if bdev-backed mounts is not used.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Dec 27, 2024In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx: gpcv2: Adjust delay after power up handshake The udelay(5) is not enough, sCVE-2024-56618 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx: gpcv2: Adjust delay after power up handshake The udelay(5) is not enough, sometimes below kernel panic still be triggered: [ 4.012973] Kernel panic - not syncing: Asynchronous SError Interrupt [ 4.012976] CPU: 2 UID: 0 PID: 186 Comm: (udev-worker) Not tainted 6.12.0-rc2-0.0.0-devel-00004-g8b1b79e88956 #1 [ 4.012982] Hardware name: Toradex Verdin iMX8M Plus WB on Dahlia Board (DT) [ 4.012985] Call trace: [...] [ 4.013029] arm64_serror_panic+0x64/0x70 [ 4.013034] do_serror+0x3c/0x70 [ 4.013039] el1h_64_error_handler+0x30/0x54 [ 4.013046] el1h_64_error+0x64/0x68 [ 4.013050] clk_imx8mp_audiomix_runtime_resume+0x38/0x48 [ 4.013059] __genpd_runtime_resume+0x30/0x80 [ 4.013066] genpd_runtime_resume+0x114/0x29c [ 4.013073] __rpm_callback+0x48/0x1e0 [ 4.013079] rpm_callback+0x68/0x80 [ 4.013084] rpm_resume+0x3bc/0x6a0 [ 4.013089] __pm_runtime_resume+0x50/0x9c [ 4.013095] pm_runtime_get_suppliers+0x60/0x8c [ 4.013101] __driver_probe_device+0x4c/0x14c [ 4.013108] driver_probe_device+0x3c/0x120 [ 4.013114] __driver_attach+0xc4/0x200 [
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Dec 27, 2024In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: adjust the position to init iso data anchor MediaTek iso data anchor iniCVE-2024-53238 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: adjust the position to init iso data anchor MediaTek iso data anchor init should be moved to where MediaTek claims iso data interface. If there is an unexpected BT usb disconnect during setup flow, it will cause a NULL pointer crash issue when releasing iso anchor since the anchor wasn't been init yet. Adjust the position to do iso data anchor init. [ 17.137991] pc : usb_kill_anchored_urbs+0x60/0x168 [ 17.137998] lr : usb_kill_anchored_urbs+0x44/0x168 [ 17.137999] sp : ffffffc0890cb5f0 [ 17.138000] x29: ffffffc0890cb5f0 x28: ffffff80bb6c2e80 [ 17.144081] gpio gpiochip0: registered chardev handle for 1 lines [ 17.148421] x27: 0000000000000000 [ 17.148422] x26: ffffffd301ff4298 x25: 0000000000000003 x24: 00000000000000f0 [ 17.148424] x23: 0000000000000000 x22: 00000000ffffffff x21: 0000000000000001 [ 17.148425] x20: ffffffffffffffd8 x19: ffffff80c0f25560 x18: 0000000000000000 [ 17.148427] x17: ffffffd33864e408 x16: ffffffd33808f7c8 x15: 0000000000200000 [ 17.232789] x14: e0cd73cf80ffffff x13: 50f2137c0a0338c9 x12: 0000000000000001 [ 17.239912] x11: 0000000080150011 x10: 0
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Dec 27, 2024In the Linux kernel, the following vulnerability has been resolved: net: sched: fix ordering of qlen adjustment Changes to sch->q.qlen around qdisc_tree_reducCVE-2024-53164 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net: sched: fix ordering of qlen adjustment Changes to sch->q.qlen around qdisc_tree_reduce_backlog() need to happen _before_ a call to said function because otherwise it may fail to notify parent qdiscs when the child is about to become empty.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Dec 2, 2024In the Linux kernel, the following vulnerability has been resolved: mptcp: cope racing subflow creation in mptcp_rcv_space_adjust Additional active subflows -CVE-2024-53122 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: mptcp: cope racing subflow creation in mptcp_rcv_space_adjust Additional active subflows - i.e. created by the in kernel path manager - are included into the subflow list before starting the 3whs. A racing recvmsg() spooling data received on an already established subflow would unconditionally call tcp_cleanup_rbuf() on all the current subflows, potentially hitting a divide by zero error on the newly created ones. Explicitly check that the subflow is in a suitable state before invoking tcp_cleanup_rbuf().
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Dec 2, 2024In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adjust VSDB parser for replay feature At some point, the IEEE ID identifiCVE-2024-53108 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.3
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adjust VSDB parser for replay feature At some point, the IEEE ID identification for the replay check in the AMD EDID was added. However, this check causes the following out-of-bounds issues when using KASAN: [ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu] [ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383 ... [ 27.821207] Memory state around the buggy address: [ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 27.821243] ^ [ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 27.821268] ================================================================== This is caused because the ID extraction happens outside of the range of the edid lenght. This commit addresses this issue by consid
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Nov 5, 2024In the Linux kernel, the following vulnerability has been resolved: net: pse-pd: Fix out of bound for loop Adjust the loop limit to prevent out-of-bounds acceCVE-2024-50129 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net: pse-pd: Fix out of bound for loop Adjust the loop limit to prevent out-of-bounds access when iterating over PI structures. The loop should not reach the index pcdev->nr_lines since we allocate exactly pcdev->nr_lines number of PI structures. This fix ensures proper bounds are maintained during iterations.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.