Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
547 results · page 1 of 11
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: target: Disable interrupts while holding delayed_cmd_lock target_do_delayed_work() tCVE-2026-99207 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: target: Disable interrupts while holding delayed_cmd_lock target_do_delayed_work() takes dev->delayed_cmd_lock with a plain spin_lock(). It runs from system_percpu_wq, so interrupts stay enabled while the lock is held. Every other acquisition of that lock uses spin_lock_irqsave(): target_handle_task_attr() and transport_complete_ordered_sync() in target_core_transport.c, and target_non_ordered_release() in target_core_device.c. That was safe while every caller of transport_complete_task_attr() ran in process context: target_complete_ok_work() from target_completion_wq, transport_complete_qf() from dev->qf_work_queue, and transport_generic_request_failure() from the submit and execute paths. Since commit 06933066d88a ("scsi: target: Add support for completing commands from backend context") that is no longer true. With complete_type=1 on a fabric that sets direct_compl_supp, target_complete() runs target_complete_ok_work() inline in the backend's completion context, which target_complete_cmd_with_sense() documents as "May be called from interrupt context". For iblock that is the bio end_io. target_complet
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix use-after-free of a destroyed user DSQ by a deferred reenqueue A deferred rCVE-2026-99144 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix use-after-free of a destroyed user DSQ by a deferred reenqueue A deferred reenqueue can read a freed user DSQ. The request stays on its CPU's deferred list until run_deferred() takes it, and the RCU callback that frees the DSQ assumes that the grace period has flushed it, so exit_dsq() checks the per-CPU node without the deferred list lock. A grace period waits for readers in flight, not for a pending run_deferred(). A run_deferred() which starts after the grace period began can detach the request right before the callback looks and then read the freed DSQ's id. Cancel the pending requests before the grace period instead. The irq work that frees the DSQ unlinks every CPU's request under the per-CPU deferred list lock, and schedule_dsq_reenq() ignores a new request under the same lock once the id is invalid. Only a run_deferred() that started before the grace period can hold a request, and it runs with IRQs disabled, so the grace period waits for it and nothing touches the DSQ after the callback.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 27, 2026When a message containing an OpenPGP key attachment was displayed, Thunderbird automatically loaded the attachment's content to offer importing the key.CVE-2026-118174 · Computers, phones & browsers · Mozilla · reported by security@mozilla.org
When a message containing an OpenPGP key attachment was displayed, Thunderbird automatically loaded the attachment's content to offer importing the key. A sender could mark the attachment as an external attachment pointing to an arbitrary URL, which Thunderbird then loaded without any user interaction, bypassing remote content blocking. On Windows, a URL pointing to an attacker-controlled network share could leak the user's NTLM credentials. The NTLM credential leak only affects Thunderbird on Windows. On other operating systems, the issue allowed a remote request that bypassed remote content blocking. This vulnerability was fixed in Thunderbird 159 and Thunderbird 153.6.
- Product
- Thunderbird
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordbugzilla.mozilla.orgmozilla.org
Oct 27, 2026A maliciously crafted HTML payload in the description of an electronic library (.lbr) file, when displayed in the Library Manager after the library is imported,CVE-2026-102638 · Other software · Autodesk · reported by psirt@autodesk.comHigh 7.1
A maliciously crafted HTML payload in the description of an electronic library (.lbr) file, when displayed in the Library Manager after the library is imported, can trigger a Stored Cross-site Scripting (XSS) vulnerability in the Autodesk Fusion desktop application. A malicious actor may leverage this vulnerability to read local files or execute arbitrary code in the context of the current process.
- Product
- Fusion
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddl.appstreaming.autodesk.comdl.appstreaming.autodesk.com
Oct 27, 2026A maliciously crafted HTML payload in a design name, when displayed after another user opens the manipulated design, can trigger a Stored Cross-site Scripting (CVE-2026-102636 · Other software · Autodesk · reported by psirt@autodesk.comHigh 7.1
A maliciously crafted HTML payload in a design name, when displayed after another user opens the manipulated design, can trigger a Stored Cross-site Scripting (XSS) vulnerability in the Autodesk Fusion desktop application. A malicious actor may leverage this vulnerability to read local files or execute arbitrary code in the context of the current process.
- Product
- Fusion
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddl.appstreaming.autodesk.comdl.appstreaming.autodesk.com
Oct 23, 2026The Goobi viewer is a web application that allows digitised material to be displayed in a web browser.CVE-2026-55486 · Other software · intranda · reported by GitHubCritical 9.3
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 25.08 to before version 26.05, the IIIF Auth 2.0 endpoints auth/login and auth/token in AuthorizationFlowResource accept an origin query parameter without validation and then (1) embed it into the Content-Security-Policy: frame-ancestors response header and (2) embed it into an HTML response body as a JavaScript single-quoted postMessage argument. Because the attacker controls both the login and token calls that initiate the flow, the unescaped value yields reflected XSS. This issue has been patched in version 26.05.
- Product
- goobi-viewer-core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 23, 2026The Goobi viewer is a web application that allows digitised material to be displayed in a web browser.CVE-2026-55465 · Other software · intranda · reported by GitHubMedium 5.3
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 22.04 to before version 26.05, the unauthenticated REST endpoint GET /api/v1/index/{solrField}/spatial/search concatenates the user-supplied region query parameter directly into a Solr query string with no escaping, no local-param stripping, and no runtime schema enforcement (the OpenAPI @Schema(pattern=...) annotation is documentation-only at the JAX-RS layer). An attacker can inject Solr local-param syntax ({!parent ...}, {!join ...}) and boolean operators to make access-restricted georeferenced records match the query, bypassing the access-condition filter. This issue has been patched in version 26.05.
- Product
- goobi-viewer-core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 23, 2026The Goobi viewer is a web application that allows digitised material to be displayed in a web browser.CVE-2026-55463 · Other software · intranda · reported by GitHubMedium 6.5
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 4.11.0 to before version 26.05, several Jakarta WebSocket endpoints in goobi-viewer-core (DownloadTaskEndpoint, CampaignEndpoint, AutocompleteEndpoint, UserEndpoint) accept connections without verifying that the associated HttpSession belongs to a logged-in user, and none validate the Origin header against an allowlist. An unauthenticated attacker can therefore connect to these endpoints; through CampaignEndpoint this allows polluting the in-process crowdsourcing page-lock map and broadcasting forged lock messages, disrupting reviewers' work. This issue has been patched in version 26.05.
- Product
- goobi-viewer-core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 23, 2026The Goobi viewer is a web application that allows digitised material to be displayed in a web browser.CVE-2026-55459 · Other software · intranda · reported by GitHubHigh 7.4
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 25.01 to before version 26.05, AuthenticationEndpoint.verifyOpenIdToken builds its verifier as JWT.require(algorithm).withIssuer(issuer).build() and does not enforce the aud claim during cryptographic validation. The aud check is performed manually afterwards via a single string-equality call, which only handles single-string aud values. In a multi-RP IdP setup, a token whose single-string aud matches the viewer's client ID but was issued for a different relying party passes the check and authenticates the attacker as the token's sub. This issue has been patched in version 26.05.
- Product
- goobi-viewer-core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 23, 2026The Goobi viewer is a web application that allows digitised material to be displayed in a web browser.CVE-2026-55457 · Other software · intranda · reported by GitHubHigh 7.4
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, Configuration.getWebApiToken returns the empty string when webapi.authorization.token is not configured. AuthorizationFilter compares the supplied token against this default without first checking that the configured token is non-empty. A request to any @AuthorizationBinding-protected endpoint with an empty ?token= value is therefore accepted. This issue has been patched in version 26.05.
- Product
- goobi-viewer-core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 23, 2026The Goobi viewer is a web application that allows digitised material to be displayed in a web browser.CVE-2026-55444 · Other software · intranda · reported by GitHubMedium 5.3
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, the legacy RSS servlet (RssResolver, GET /rss/) accepts the q and filterQuery parameters and concatenates them into Solr queries without validation. The servlet predates the REST API layer and lacks the input validation present in GET /api/v1/records/rss. q forms the main query body (wrapped only in literal parentheses); filterQuery is passed directly as a Solr fq. An unauthenticated attacker can inject Solr boolean operators to break out of the wrapping and render the trailing access-condition filter-query suffix optional, so that access-restricted records are included in the generated RSS feed. The q and filterQuery parameters are the same underlying vulnerability in the same servlet; q (the main query body) has the broader scope. This issue has been patched in version 26.05.
- Product
- goobi-viewer-core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 23, 2026The Goobi viewer is a web application that allows digitised material to be displayed in a web browser.CVE-2026-55442 · Other software · intranda · reported by GitHubMedium 5.3
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 23.03 to before version 26.05, SolrTools.cleanUpQuery() strips Solr local-parameter syntax ({!...}) from user-supplied query strings before they reach Solr. Its regex can be bypassed by wrapping the local parameter in a second pair of curly braces ({{!...}}): the outer braces are stripped, the inner {!...} survives intact, and a valid Solr local parameter is forwarded. The flaw is in the shared sanitizer, so it affects any endpoint that routes user input through cleanUpQuery. The double-brace bypass applies from v23.10 (the greedy \{(.+)\} regex); a related bare-!join rewrap path is present. This issue has been patched in version 26.05.
- Product
- goobi-viewer-core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 23, 2026The Goobi viewer is a web application that allows digitised material to be displayed in a web browser.CVE-2026-46652 · Other software · intranda · reported by GitHubCritical 9.8
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 24.03 to before version 26.05, ExternalFilesDownloader.getFilename() extracts the destination filename from a server-supplied Content-Disposition response header and passes it directly to Path.resolve() without stripping directory components. This allows for a malicious HTTP server that the viewer fetches from to supply an absolute path or ../ traversal sequences as the filename, writing attacker-controlled content to an arbitrary path writable by the Tomcat process. When targeting the deployed web-application directory, this yields remote code execution as the tomcat OS user. This issue has been patched in version 26.05.
- Product
- goobi-viewer-core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 23, 2026The Goobi viewer is a web application that allows digitised material to be displayed in a web browser.CVE-2026-46651 · Other software · intranda · reported by GitHubCritical 9.8
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. From version 24.03 to before version 26.05, the DownloadTaskEndpoint WebSocket endpoint (/tasks/download/monitor.socket) in goobi-viewer-core accepts download requests from unauthenticated users. This issue has been patched in version 26.05.
- Product
- goobi-viewer-core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 23, 2026The Goobi viewer is a web application that allows digitised material to be displayed in a web browser.CVE-2026-46347 · Other software · intranda · reported by GitHubMedium 6.8
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, when a password reset link is visited, the application generates a replacement password in a predictable way and emails it to the account holder. The insufficient entropy allows the password to be brute-forced by an attacker who can approximate the server-side generation time. Exploiting this finding in isolation requires the victim to have triggered the reset themselves and the attacker to infer the server time from network or email metadata. This issue has been patched in version 26.05.
- Product
- goobi-viewer-core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 23, 2026The Goobi viewer is a web application that allows digitised material to be displayed in a web browser.CVE-2026-46346 · Other software · intranda · reported by GitHubMedium 6.5
The Goobi viewer is a web application that allows digitised material to be displayed in a web browser. Prior to version 26.05, the password reset token is predictably based on the time of the reset request. An attacker who knows the target's email address can request a reset and then brute-force the token. Exploiting this finding alone forces an unauthorized password reset on any account. This issue has been patched in version 26.05.
- Product
- goobi-viewer-core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 21, 2026Traefik 2.11.0 before 2.11.58 and 3.0.0 before 3.7.14 stores its NTLM/Kerberos backend round tripper in a client-connection slot not keyed by ServersTransport, CVE-2026-114642 · Other software · traefik · reported by VulnCheckHigh 7
Traefik 2.11.0 before 2.11.58 and 3.0.0 before 3.7.14 stores its NTLM/Kerberos backend round tripper in a client-connection slot not keyed by ServersTransport, so one service's TLS client configuration is reused for another service's backend. An unauthenticated client can arm the slot via a backend issuing an NTLM or Negotiate challenge, then reach another service on the same keep-alive connection, bypassing its root CAs, server name, and certificate verification.
- Product
- traefik
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Oct 20, 2026DBI versions before 1.656 for Perl crash via type confusion in dbi_profile when a database handle is destroyed under a Profile Path with an {attr} element.CVE-2026-108518 · Other software · reported by 9b29abf9-4ab0-4765-b253-1875cd9b441eLow 2.9
DBI versions before 1.656 for Perl crash via type confusion in dbi_profile when a database handle is destroyed under a Profile Path with an {attr} element. An {attr} element names a database handle attribute, which dbi_profile reads from the handle's inner hash. It expects the inner handle as a reference and dereferences it, but a handle that is being destroyed hands back the inner hash itself, so the dereference yields the hash's bucket array. A type check on that pointer usually fails and the call goes unprofiled. When the memory it addresses passes the check, the attribute lookup dereferences a NULL or invalid pointer and the process dies on SIGSEGV. The Path is set by the application, by the Profile handle attribute, or by the DBI_PROFILE environment variable, so `DBI_PROFILE={ImplementorClass}` can crash an unmodified program.
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: HID: hid-oxp: use cancel_delayed_work_sync() in remove oxp_hid_remove() uses cancel_delayeCVE-2026-98500 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: HID: hid-oxp: use cancel_delayed_work_sync() in remove oxp_hid_remove() uses cancel_delayed_work() for all three delayed work items. cancel_delayed_work() only dequeues a pending work item without waiting for a currently executing callback to finish. If any of the work callbacks (oxp_rgb_queue_fn, oxp_btn_queue_fn, oxp_mcu_init_fn) is running at the time of removal, the callback continues executing concurrently with hid_hw_close() and hid_hw_stop(), accessing the HID device after it has been closed and stopped. Use cancel_delayed_work_sync() instead to ensure that any in-progress work callback completes before device teardown proceeds.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 16, 2026PlayEdu through 2.3 contains a missing authorization vulnerability in the CourseController that allows authenticated students to access department-restricted coCVE-2026-111603 · Other software · PlayEdu · reported by VulnCheckMedium 5.3
PlayEdu through 2.3 contains a missing authorization vulnerability in the CourseController that allows authenticated students to access department-restricted courses by omitting the department visibility check. Attackers can enumerate sequential course and attachment IDs via the course details and attachment download endpoints to obtain course structure and attachment files from other departments.
- Product
- PlayEdu
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: powerpc/entry: Fix irq_soft_mask corruption on replayed interrupt exit When __replay_soft_CVE-2026-98395 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: powerpc/entry: Fix irq_soft_mask corruption on replayed interrupt exit When __replay_soft_interrupts() replays a pending interrupt (e.g. PACA_IRQ_DEC -> timer_interrupt), it calls the handler directly with a synthetic pt_regs. The DEFINE_INTERRUPT_HANDLER_ASYNC wrapper around each handler calls arch_interrupt_async_exit_prepare() on the way out, which calls arch_interrupt_exit_prepare() -> local_irq_disable() -> arch_local_irq_disable(), which does: irq_soft_mask_set(IRQS_DISABLED) /* 0x1 */ This unconditionally overwrites irq_soft_mask with IRQS_DISABLED (0x1), stripping the IRQS_PMI_DISABLED (0x2) bit. The result is that irq_soft_mask is 0x1 instead of IRQS_ALL_DISABLED (0x3) when the handler returns to __replay_soft_interrupts(). For a normally-taken interrupt this is harmless: the next interrupt always enters through arch_interrupt_enter_prepare() which unconditionally sets irq_soft_mask to IRQS_ALL_DISABLED. But during replay, next_interrupt() is called directly between replayed handlers without going back through arch_interrupt_enter_prepare(), so the stripped bit is never restored. next_interrupt(
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 12, 2026Zebra 2.3.0 before 6.4.0 contains a protection mechanism failure that allows unauthenticated peers to evade bans because bans and misbehavior scores are keyed oCVE-2026-109364 · Other software · ZcashFoundation · reported by VulnCheckMedium 6.9
Zebra 2.3.0 before 6.4.0 contains a protection mechanism failure that allows unauthenticated peers to evade bans because bans and misbehavior scores are keyed on exact IP addresses. Attackers can reconnect from fresh IPv6 addresses in their /64 allocation or flush the 20,000-entry FIFO ban list to restore access for banned peers.
- Product
- zebra
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Oct 5, 2026Host search in Frontend allows filtering by fields that are not displayed, including stored IPMI and PSK credentials.CVE-2026-59785 · Other software · Zabbix · reported by security@zabbix.comMedium 5.1
Host search in Frontend allows filtering by fields that are not displayed, including stored IPMI and PSK credentials. A user with read access can guess a credential and see from the search result whether the guess was right, letting them uncover it.
- Product
- Zabbix
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 1, 2026Wormhole.app as deployed before 2026-08-22 misconfigures the coturn TURN server and does not properly restrict TCP relay peers, allowing an unauthenticated attaCVE-2026-100251 · Other software · Wormhole App · reported by 9119a7d8-5eab-497f-8521-727c672e3725Medium 6.9
Wormhole.app as deployed before 2026-08-22 misconfigures the coturn TURN server and does not properly restrict TCP relay peers, allowing an unauthenticated attacker to access instance metadata or to source TCP connections from the Wormhole relay's IP.
- Product
- Wormhole
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordraw.githubusercontent.comwormhole.app
Sep 30, 2026A form-rendering interface in the Advanced Forms component is reachable without authentication so that published forms can be displayed to anonymous visitors, bCVE-2026-102121 · Other software · Kiteworks · reported by 9119a7d8-5eab-497f-8521-727c672e3725High 8.6
A form-rendering interface in the Advanced Forms component is reachable without authentication so that published forms can be displayed to anonymous visitors, but it returned more data than the form itself required. Anyone who knew the web address of a published form could potentially retrieve the form owner's Kiteworks account profile, including personal details, along with parts of the deployment's configuration settings; no passwords, authentication tokens, or multi-factor secrets were exposed.
- Product
- Secure Data Forms
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comraw.githubusercontent.com
Sep 29, 2026In Anjvision YSSD‑RTMP‑H5 firmware version 3.3.2.4, the firmware embeds hardcoded cloud‑API credentials that are shared across deployed devices.CVE-2026-100294 · Other software · Anjvision · reported by ics-cert@hq.dhs.govHigh 8.7
In Anjvision YSSD‑RTMP‑H5 firmware version 3.3.2.4, the firmware embeds hardcoded cloud‑API credentials that are shared across deployed devices. Anyone obtaining the public firmware package can reuse these values to interact with the cloud service in ways not intended for normal operation.
- Product
- YSSD-RTMP-H5
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 26, 2026Nodemailer versions 5.0.0 through 10.0.1 use a process-global DNS cache that is keyed only by the DNS host, while each cache entry also stores the caller-specifCVE-2026-100701 · Other software · nodemailer · reported by VulnCheckMedium 6
Nodemailer versions 5.0.0 through 10.0.1 use a process-global DNS cache that is keyed only by the DNS host, while each cache entry also stores the caller-specific TLS servername. When two direct TLS/SMTPS transports (secure: true) resolve the same non-IP host with different tls.servername values, the first transport's servername is returned on the cache hit and overwrites the second transport's explicitly configured value, so Nodemailer sends the wrong SNI value and validates the peer certificate against the wrong identity. In multi-tenant services or SNI-routed SMTP gateways, an attacker who can prime the cache can cause a victim transport to connect to the attacker's TLS virtual host and accept the attacker's certificate even with rejectUnauthorized: true, disclosing the victim's SMTP credentials. Fixed in 10.0.2.
- Product
- nodemailer
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Sep 24, 2026Catalyst::Seal versions before 0.03 for Perl allow one request to disable a path or route a later one past an authorization check via a dispatch memo keyed on tCVE-2026-85491 · Other software · reported by 9b29abf9-4ab0-4765-b253-1875cd9b441eHigh 8.8
Catalyst::Seal versions before 0.03 for Perl allow one request to disable a path or route a later one past an authorization check via a dispatch memo keyed on the request path alone. Catalyst::Seal replaces the dispatcher's prepare_action with a version that memoises how a path resolved: which dispatch type matched, at which level, and what was left over as arguments. The key is the request path and nothing else. Action roles that match on the method, content type, scheme or query make that resolution depend on state the key does not carry, so the memo answers for a request it was not built from. A path that resolves to no action is memoised as well, and replaying that entry returns without consulting any dispatch type, so no action is set and the request fails. A GET of a path whose action is declared POST-only therefore disables that path for every later request, the correct POST included. An entry that did resolve replays the level the earlier descent reached. Where a POST-only action sits below a shallower action on the same path, a GET memoises the shallow route, and a later POST is dispatched there with an auto() guarding the deeper controller never running. The memo is cl
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordmetacpan.orgmetacpan.org
Sep 18, 2026ArcadeDB (Maven artifact com.arcadedb:arcadedb-engine) through 26.8.1 enforces its per-type/per-record access-control rules only in LocalBucket, keyed on file iCVE-2026-93594 · Other software · ArcadeData · reported by VulnCheckHigh 7.1
ArcadeDB (Maven artifact com.arcadedb:arcadedb-engine) through 26.8.1 enforces its per-type/per-record access-control rules only in LocalBucket, keyed on file id. Query-execution paths that reach record data through LSM index files or the TimeSeries engine never invoke that permission check, so an authenticated user who is denied readRecord/deleteRecord on a type can still, with a single ordinary SQL statement, read the type's indexed key values and record IDs (e.g. SELECT key, rid FROM INDEX:Type[field]), read MAX/MIN values via the index shortcut, read and count TimeSeries samples, learn the type's record count, and delete index entries (DELETE FROM INDEX:Type[field]), which desynchronizes the index from the data and can defeat unique constraints. Index and type names needed for exploitation are discoverable because SELECT FROM schema:indexes is unfiltered. The issue affects both embedded and server deployments and all transports (HTTP, Bolt, Postgres, Gremlin) once a principal is bound. Fixed in 26.9.1.
- Product
- arcadedb
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: regulator: core: use system_freezable_wq for init complete work schedule_delayed_work() usCVE-2026-90360 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: regulator: core: use system_freezable_wq for init complete work schedule_delayed_work() uses system_wq, which is non-freezable, allowing regulator_init_complete_work to run concurrently with system suspend. This work fires ~30s after boot to disable unused regulators via I2C. When it races with PM suspend, the I2C adapter may already be suspended, triggering a -ESHUTDOWN warning in __i2c_transfer(): WARNING: ... at __i2c_transfer+0x36c/0x3c8 Call trace: __i2c_transfer i2c_transfer regmap_i2c_write _regmap_update_bits regulator_disable_regmap _regulator_do_disable regulator_late_cleanup regulator_init_complete_work_function process_one_work Switch to system_freezable_wq so the work is frozen before any device is suspended, eliminating the race.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dm-integrity: replace forgeable discard filler with a keyed sector marker The discard-blocCVE-2026-90333 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: dm-integrity: replace forgeable discard filler with a keyed sector marker The discard-block check in dm_integrity_rw_tag() treats a stored tag of all 0xf6 bytes (DISCARD_FILLER) as proof a block was discarded and skips HMAC verification. allow_discards is only accepted in dm-integrity's standalone mode. An attacker with raw write access to the backing device, but without the integrity key, can stamp any block with an all-0xf6 tag and have it served as authentic. Add a new "allow_discards_keyed" target argument that marks discarded blocks with a keyed checksum of (salt || sector) instead, computed by integrity_discard_checksum().
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: md: wait for behind writes before destroying bitmap __md_stop() destroyed the bitmap beforCVE-2026-90278 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: md: wait for behind writes before destroying bitmap __md_stop() destroyed the bitmap before calling mddev_detach(). That made mddev_detach() skip bitmap_ops->wait_behind_writes(), because the bitmap was already disconnected from mddev. This was still safe for the legacy bitmap because bitmap_destroy() waits for behind writes itself. llbitmap keeps that wait in its ->wait_behind_writes() operation instead, while ->destroy() tears down the llbitmap storage. With the old ordering, RAID1 behind-write completions could still run after llbitmap storage had been freed. Call mddev_detach() before md_bitmap_destroy() so the common detach path can wait for behind writes while the bitmap is still alive. Only destroy the bitmap after those users are gone.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026Newsletter: Does not generate its email tracking signing key with sufficient entropy and signs its tracking links with an unkeyed hashCVE-2026-86824 · WordPress plugins & themes · reported by WPScanMedium 4.8
The Newsletter WordPress plugin before 9.3.8 does not generate its email tracking signing key with sufficient entropy and signs its tracking links with an unkeyed hash, allowing an unauthenticated attacker who recovers that key offline to forge tracking links, obtain any subscriber's session token, and read and modify that subscriber's stored personal data.
- Product
- Newsletter
- Fixed in
- 9.3.8
- What to do
- Update Newsletter to 9.3.8 or newer.
Sep 16, 2026DD-WRT firmware, as deployed on TP-Link TL-WR740N v1 through v4 hardware, stores sensitive authentication credentials in cleartext within non-volatile memory.CVE-2025-56565 · Other software · reported by MITREHigh 7.6
DD-WRT firmware, as deployed on TP-Link TL-WR740N v1 through v4 hardware, stores sensitive authentication credentials in cleartext within non-volatile memory. The exposed material includes SSH private keys, dynamic DNS passwords, email notification credentials and administrative passwords. An attacker with physical access to the device can extract these credentials from an SPI flash dump, leading to device compromise, infiltration of the connected network and unauthorised access to dependent third-party services.
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comwiki.dd-wrt.com
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: cec: disable delayed work before freeing an interrupted transmit cec_transmit_msg_fCVE-2026-89899 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: media: cec: disable delayed work before freeing an interrupted transmit cec_transmit_msg_fh() drops adap->lock to wait for a blocking transmit in wait_for_completion_killable(). If that wait is interrupted by a signal, cancel_delayed_work_sync() can run before the CEC kthread arms the reply timeout via schedule_delayed_work(&data->work) in cec_transmit_done_ts(). The work is then armed after the cancel, and the data is freed with its delayed_work still pending: ODEBUG: free active (active state 0) object: ... hint: cec_wait_timeout Use disable_delayed_work_sync(): it cancels the work and disables it, so the later schedule_delayed_work() becomes a no-op and the work cannot be re-armed. The data is freed right after, so it need not be re-enabled.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't BUG_ON a destroyed DSQ in process_deferred_reenq_users scx_bpf_dsq_reenq(CVE-2026-89516 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't BUG_ON a destroyed DSQ in process_deferred_reenq_users scx_bpf_dsq_reenq() queues a deferred reenq (dru) that runs from run_deferred(), not ops.dispatch(). If the DSQ is destroyed before the dru runs, process_deferred_reenq_users() sees dsq->id == SCX_DSQ_INVALID and hits the BUG_ON. destroy_dsq() doesn't flush pending drus, so just skip. tj: Read dsq->id once with READ_ONCE(). Reading it separately in the INVALID check and the BUG_ON would leave a window where destroy_dsq() can invalidate the id between the two reads and still trigger the BUG_ON.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: power: supply: rt9455: quiesce delayed work before teardown The threaded IRQ handler can qCVE-2026-89465 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4
In the Linux kernel, the following vulnerability has been resolved: power: supply: rt9455: quiesce delayed work before teardown The threaded IRQ handler can queue pwr_rdy_work, max_charging_time_work and batt_presence_work. pwr_rdy_work and batt_presence_work can also queue max_charging_time_work, while batt_presence_work can requeue itself. rt9455_remove() cancels max_charging_time_work before batt_presence_work. The latter can therefore queue max_charging_time_work after it has already been cancelled: rt9455_remove() workqueue cancel pwr_rdy_work cancel max_charging_time_work batt_presence_work queues max_charging_time_work cancel batt_presence_work return devres frees rt9455_info max_charging_time_work dereferences rt9455_info The IRQ also remains registered until devres cleanup and can queue more work after any of the cancellation calls. If rt9455_hw_init() fails after the IRQ has been requested, probe returns without cancelling work that may already have been queued. A pendin
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 9, 2026A privilege-escalation issue in the Portworx Operator when deployed on Red Hat OpenShift (OCP).CVE-2026-15140 · Other software · Everpure · reported by psirt@purestorage.comHigh 7.7
A privilege-escalation issue in the Portworx Operator when deployed on Red Hat OpenShift (OCP). Only under specific conditions during the initial provisioning of a Portworx storage cluster, a user holding only limited, namespace-scoped permissions could cause the operator to grant broader access than intended, potentially resulting in elevated privileges within the Kubernetes cluster.
- Product
- Portworx Operator
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordsupport.everpuredata.com
Sep 6, 2026Authen::SASL::Perl::DIGEST_MD5 versions before 2.2100 for Perl accept replayed authentication responses via unverified nonce in server_step.CVE-2026-86219 · Other software · reported by 9b29abf9-4ab0-4765-b253-1875cd9b441eCritical 9.8
Authen::SASL::Perl::DIGEST_MD5 versions before 2.2100 for Perl accept replayed authentication responses via unverified nonce in server_step. server_start generates a fresh nonce and sends it in the challenge, and nothing later compares that value against the nonce the client returns. server_step derives the expected digest from the client's own parameters, so a response verifies whenever its digest matches the nonce it carries. The count table it also checks is keyed on the client-supplied nonce and starts empty in each new server object, so a captured first response, carrying `nc=00000001`, passes that too. RFC 2831 defines the nonce in the response as the value the server sent in the preceding challenge. An attacker who observes one successful `qop=auth` exchange can replay the captured response against a later session for the same service, host, realm and user, and authenticate as that user without knowing the password.
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddatatracker.ietf.orggithub.com
Aug 27, 2026openssl_encrypt versions before 1.4.9 store an unkeyed SHA-256 hash of the plaintext in the cleartext file header metadata.CVE-2026-81688 · Other software · jahlives · reported by VulnCheckHigh 8.7
openssl_encrypt versions before 1.4.9 store an unkeyed SHA-256 hash of the plaintext in the cleartext file header metadata. Attackers can read this hash without the password to confirm guessed plaintexts offline or fingerprint identical plaintexts across separately-encrypted files.
- Product
- openssl_encrypt
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Aug 27, 2026A WebFlux application using functional endpoints and deployed with DispatcherServlet may be vulnerable to a header predicate bypass in a pre-flight request.CVE-2026-47892 · Other software · Spring · reported by security@vmware.comCritical 9.8
A WebFlux application using functional endpoints and deployed with DispatcherServlet may be vulnerable to a header predicate bypass in a pre-flight request. Spring Framework 7.0.0 - 7.0.8 Spring Framework 6.2.0 - 6.2.19 Spring Framework 6.1.0 - 6.1.28 Spring Framework 6.0.0 - 6.0.30 Spring Framework 5.3.0 - 5.3.49 Spring Framework 5.2.5.RELEASE - 5.2.25.RELEASE
- Product
- Spring Framework
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 26, 2026Royal Addons for Elementor: Does not perform any capability or ownership check (relying only on a publicly-scrapeable nonce) before writing like-count and visitor-tracking post meta keyed on an arbitrary post IDCVE-2026-13404 · WordPress plugins & themes · reported by WPScanMedium 5.3
The Royal Addons for Elementor WordPress plugin before 1.7.1066 does not perform any capability or ownership check (relying only on a publicly-scrapeable nonce) before writing like-count and visitor-tracking post meta keyed on an arbitrary post ID, allowing unauthenticated users to modify that metadata on any post, including private and draft posts.
- Product
- Royal Addons for Elementor
- Fixed in
- 1.7.1066
- What to do
- Update Royal Addons for Elementor to 1.7.1066 or newer.
Aug 25, 2026rclone versions before v1.75.0 fail to reject transport downgrades in redirect handling, allowing Basic authorization and Cookie headers to be replayed over plaCVE-2026-79779 · Other software · rclone · reported by VulnCheckMedium 6
rclone versions before v1.75.0 fail to reject transport downgrades in redirect handling, allowing Basic authorization and Cookie headers to be replayed over plaintext HTTP after same-host HTTPS-to-HTTP redirects. An on-path attacker observing the plaintext hop can capture and reuse credentials to perform WebDAV operations with the compromised account's permissions.
- Product
- rclone
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Aug 25, 2026Improper Authentication vulnerability in team-alembic AshAuthentication allows purpose-limited JWTs to be replayed as full bearer API credentials when a resourcCVE-2026-65633 · Other software · team-alembic · reported by 6b3ad84c-e1a6-4bf7-a703-f496b71e49dbHigh 7.6
Improper Authentication vulnerability in team-alembic AshAuthentication allows purpose-limited JWTs to be replayed as full bearer API credentials when a resource uses stateless bearer-token verification. The bearer-token authentication helper AshAuthentication.Plug.Helpers.retrieve_from_bearer/3 verifies an Authorization: Bearer JWT's signature and rejects tokens containing an act claim, but performs no check that the token's purpose claim equals user at the bearer boundary. When the resource is configured with require_token_presence_for_authentication?: false (the DSL default), the follow-on validate_token/3 helper returns {:ok, nil} without consulting the token resource, so no downstream check on purpose takes place either. As a result, any valid, non-expired JWT the library itself issued for a narrow, single-purpose flow (most notably the purpose: sign_in token that WebAuthn always emits during sign-in, and that the Password strategy emits when sign-in tokens are enabled) is accepted directly as a general-purpose bearer credential and resolves to a full current_user assignment. This bypasses the library's intended token-exchange contract, in which the sign_in token is meant to
- Product
- ash_authentication
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordcna.erlef.orggithub.com
Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: usb: Fix UAF at delayed release of MIDI2 EPs The recent fix for UAF in ump_to_endpoiCVE-2026-74642 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb: Fix UAF at delayed release of MIDI2 EPs The recent fix for UAF in ump_to_endpoint() caused another UAF because it tries to dereference the UMP endpoint object, but this might be executed at a delayed context where the endpoint has been already released. Add private_free to clear the associated data for avoiding the further dereference for delayed releases.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 19, 2026HTML injection vulnerability in M-Files Web before 26.8.16330.2 allows an authenticated attacker to affect web user interface contents displayed to other users.CVE-2026-18371 · Other software · M-Files Corporation · reported by security@m-files.comMedium 5.1
HTML injection vulnerability in M-Files Web before 26.8.16330.2 allows an authenticated attacker to affect web user interface contents displayed to other users.
- Product
- M-Files Web
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Prevent XDomain delayed work use-after-free on disconnect tb_xdp_handle_requeCVE-2026-74575 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Prevent XDomain delayed work use-after-free on disconnect tb_xdp_handle_request() runs on system_wq and queues xd->state_work via queue_delayed_work() in three request handlers: PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake), and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues xd->properties_changed_work when local properties change. Concurrently, tb_xdomain_remove() calls stop_handshake() which does cancel_delayed_work_sync() on both delayed works. Later, tb_xdomain_unregister() calls device_unregister() which eventually frees the xdomain. Since commit 559c1e1e0134 ("thunderbolt: Run tb_xdp_handle_request() in system workqueue") moved the request handler off tb->wq, the handler and the remove path are no longer serialized. If queue_delayed_work() executes after cancel_delayed_work_sync() but before the xdomain is freed, the delayed work fires on a freed object. Add xd->removing that tb_xdomain_remove() sets under xd->lock before calling stop_handshake(). Each external queue site holds the same lock and checks removing before calling queue_delayed_work(). This pr
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs Cancel (and flush) CVE-2026-74517 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.3
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs Cancel (and flush) the I/O APIC's delayed EOI handling work during the "pre VM destroy" phase, before vCPUs are destroyed, as processing the EOI broadcast will inject another IRQ if the line is asserted, i.e. will try to deliver an IRQ to the target vCPU(s). Canceling the work after vCPUs are destroyed leads to UAF if the delayed work is processed after vCPUs are destroyed. BUG: KASAN: slab-use-after-free in __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250 Read of size 8 at addr ffff8880499abea0 by task kworker/1:2/1218 CPU: 1 UID: 0 PID: 1218 Comm: kworker/1:2 Not tainted 7.1.0-rc7 #5 PREEMPT(lazy) Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events kvm_ioapic_eoi_inject_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 print_report+0x139/0x4ad mm/kasan/report.c:482 kasan_report+0xe4/0x1d0 mm/kasan/report.c
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs commit 4f375ade6aa9 ("bpf: AvCVE-2026-74363 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning htab with internal structs") moved inode cleanup from ->free_inode() into ->destroy_inode() to avoid sleeping in RCU context when calling bpf_any_put(). However this removed the RCU delay on freeing the inode itself and the cached symlink body (i_link), both of which can be accessed by RCU pathwalk (pick_link, may_lookup etc.). This causes a use-after-free when a concurrent unlinkat() drops the last inode reference and destroy_inode() frees the inode immediately, while another task is still walking the path in RCU mode and reads inode->i_opflags (offset +2) inside current_time() -> is_mgtime(). KASAN reports: BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313 Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags) The rules (per Al Viro): ->destroy_inode() called immediately, can sleep, use for blocking cleanup e.g. bpf_any_put() ->free_inode() called after RCU grace period, use for freeing inode and any
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid pointer dereference in __btrfs_run_delayed_refs() In the beginning of tCVE-2026-74321 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix invalid pointer dereference in __btrfs_run_delayed_refs() In the beginning of the loop, we try to obtain a locked delayed ref head, if 'locked_ref' is currently NULL, by calling btrfs_select_ref_head(), which can return an error pointer. If the error pointer is -EAGAIN we do a continue and go back to the beginning of the loop, which will not try again to call btrfs_select_ref_head() since 'locked_ref' is no longer NULL but it's ERR_PTR(-EAGAIN), and then we do: spin_lock(&locked_ref->lock); against a ERR_PTR(-EAGAIN) value, generating an invalid pointer dereference. Fix this by ensuring that 'locked_ref' is set to NULL when btrfs_select_ref_head() returns ERR_PTR(-EAGAIN) and incrementing 'count' as well, to prevent infinite looping. We do this by doing a goto to the bottom of the loop that already sets 'locked_ref' to NULL and does a cond_resched(), with an increment to 'count' right before the goto. These measures were in place before the refactoring in commit 0110a4c43451 ("btrfs: refactor __btrfs_run_delayed_refs loop") but were unintentionally lost afterwards.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.