Vulnerability database

639 results · page 1 of 13

• Oct 27, 2026WeKnora before 0.8.2 contains a server-side request forgery vulnerability in isRestrictedIP() that misclassifies NAT64-prefixed IPv6 addresses as public.CVE-2026-118376 · Other software · Tencent · reported by VulnCheckMedium 6

  WeKnora before 0.8.2 contains a server-side request forgery vulnerability in isRestrictedIP() that misclassifies NAT64-prefixed IPv6 addresses as public. Authenticated attackers can supply URLs resolving to NAT64 encodings of internal addresses via web_fetch or URL-based knowledge import to reach internal services or cloud metadata endpoints.

  Product

  WeKnora

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026The IPv6 stack derived the long-lived secret key used to compute RFC 7217 stable interface identifiers (gen_stable_iid() in subsys/net/ip/ipv6.c) and RFC 8981 tCVE-2026-19742 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgLow 3.7

  The IPv6 stack derived the long-lived secret key used to compute RFC 7217 stable interface identifiers (gen_stable_iid() in subsys/net/ip/ipv6.c) and RFC 8981 temporary interface identifiers (gen_temporary_iid() in subsys/net/ip/ipv6_pe.c) with sys_rand_get(). That API is documented as not cryptographically secure, while both RFCs require this key to be an unpredictable random value of at least 128 bits — the unpredictability of every generated IID rests entirely on it. Depending on the platform, sys_rand_get() resolves either to a hardware entropy device or, on boards whose entropy driver sets CONFIG_ENTROPY_NEEDS_PRNG, to the non-cryptographic xoshiro128++ generator in subsys/random/random_xoshiro128.c, which keeps a single global 128-bit state shared with every other sys_rand_get() consumer. Many of those consumers put their output directly on the wire (ephemeral source ports, DNS query IDs, CoAP message IDs and tokens, DHCPv6 transaction IDs, WebSocket masking keys), and the xoshiro state transition is invertible, so an observer of a device's traffic can recover the generator state and reconstruct the IID secret key. Additionally, with the entropy-device backend sys_rand_get()

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: validate transport header presence in set_ipv6_addr When executing IPv6 CVE-2026-99088 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: validate transport header presence in set_ipv6_addr When executing IPv6 address rewrite actions on IPv6 fragments, set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr() processes a non-first IPv6 fragment, it sets key->ip.proto to NEXTHDR_FRAGMENT and returns early without calling skb_set_transport_header(). update_ipv6_checksum() unconditionally evaluates skb_transport_offset() on entry before checking l4_proto. Because skb->transport_header is uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although it is completely harmless. Fix this by returning early in update_ipv6_checksum() if l4_proto is NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset for fragments while preserving the debug warning for any other protocol where the transport header is unexpectedly missing. See the syzbot trace: !skb_transport_header_was_set(skb) WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635 WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [in

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 26, 2026Interpretation Conflict vulnerability in hackney_url in benoitc hackney allows Server Side Request Forgery via a percent-encoded bracketed IPv6 literal or an IPCVE-2026-115700 · Other software · benoitc · reported by 6b3ad84c-e1a6-4bf7-a703-f496b71e49dbMedium 6.9

  Interpretation Conflict vulnerability in hackney_url in benoitc hackney allows Server Side Request Forgery via a percent-encoded bracketed IPv6 literal or an IP literal with a trailing dot. A host such as %5B%3A%3Affff%3A127%2E0%2E0%2E1%5D (decoding to [::ffff:127.0.0.1]) or 127.0.0.1. is not an IP address to a caller's allowlist built on uri_string:parse/1 and inet:parse_address/1, while hackney connects to the address it denotes. The same applies to a Location target when redirects are followed. The IP-literal gate that hackney_url:normalize/2 applies to a percent-decoded host, added to close the percent-encoded IP bypass of CVE-2026-47076, passes the decoded value to inet_parse:address/1 as is. The connect path in hackney_happy:parse_address/1 drops a surrounding bracket pair, and the resolver ignores a trailing dot, so both forms pass the gate and still reach the literal address. Domain names with a trailing dot and unencoded IPv6 literals are not affected. This issue affects hackney: from 4.0.1 before 4.9.0.

  Product

  hackney

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordcna.erlef.orggithub.com

• Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: udp: Create exceptions before socket matching Currently, when ICMPv6 Packet Too Big CVE-2026-99076 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: udp: Create exceptions before socket matching Currently, when ICMPv6 Packet Too Big and Redirect Message packets are locally delivered and quote a UDP packet, an exception is only created in the IPv6 exception cache if the kernel can match the UDP packet to an existing socket. This behavior allows off-path attackers to conduct a side-channel attack on the exception cache in order to discover the ephemeral port used by a connected UDP socket. Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and commit a00df2caffed ("ipv6: make exception cache less predictible") tried to mitigate such attacks by making it harder for attackers to discover hash collisions in the exception cache and by randomizing the number of exceptions a hash bucket can hold, respectively. Unfortunately, both of the mitigations can be bypassed. Instead, mitigate such attacks by always creating an exception, even before trying to find a matching socket. Do that by calling ip6_update_pmtu() and ip6_redirect(), the helpers used when the quoted packet did not originate from a socket. This means that guesses (right or wrong) f

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: do not warn on route notification size race fib6_info_hw_flags_set() sizes the skb wCVE-2026-99070 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: do not warn on route notification size race fib6_info_hw_flags_set() sizes the skb with rt6_nlmsg_size() and later fills it with rt6_fill_node(). With nexthop compatibility mode enabled, a concurrent replacement can grow the group between these independent snapshots. rt6_fill_node() can then legitimately return -EMSGSIZE, so the warning does not prove a sizing bug. Remove the warning. The existing error path still frees the skb and reports the error to listeners.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel() Since commit d58e468b1112 ("flowCVE-2026-98934 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel() Since commit d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") __skb_flow_dissect() needs a net pointer, either from skb->dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect") a caller provided pointer. syzbot was able to reach seg6_make_flowlabel() with an skb having neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery message through an IPv4 route using seg6 encap, while net.ipv6.seg6_flowlabel is set to 1. seg6_make_flowlabel() already has a net pointer, use skb_get_hash_net(). WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126, CPU#0: syz.0.17/4930 Call trace: __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126 (P) __skb_get_hash_net+0xe0/0x29c net/core/flow_dissector.c:1903 skb_get_hash include/linux/skbuff.h:1663 [inline] seg6_make_flowlabel+0xcc/0x1ec net/ipv6/seg6_iptunnel.c:132 __seg6_do_srh_encap+0x320/0xbf4 net/ipv6/seg6_iptunnel.c:161 seg6_do_srh+0x4b4/0xa44 net/ipv6/seg6_iptunnel.c:43

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 20, 2026Multiple exploitable stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup dhcp_dns functionality of X2000R (version(s): TOTOLINK-X2000R-GhCVE-2026-42026 · Other software · totolink · reported by talos-cna@cisco.comCritical 9.1

  Multiple exploitable stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup dhcp_dns functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the dhcp_dns2 parameter.

  Product

  Totolink

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordtalosintelligence.com

• Oct 20, 2026Multiple exploitable stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup dhcp_dns functionality of X2000R (version(s): TOTOLINK-X2000R-GhCVE-2026-42025 · Other software · totolink · reported by talos-cna@cisco.comCritical 9.1

  Multiple exploitable stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup dhcp_dns functionality of X2000R (version(s): TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327). A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the dhcp_dns1 parameter.

  Product

  Totolink

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordtalosintelligence.com

• Oct 20, 2026Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup static network configuration functionality of Totolink X2000R TOTOLINK-X2000CVE-2026-42024 · Other software · totolink · reported by talos-cna@cisco.comCritical 9.1

  Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup static network configuration functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the static_gw parameter.

  Product

  Totolink

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordtalosintelligence.com

• Oct 20, 2026Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup static network configuration functionality of Totolink X2000R TOTOLINK-X2000CVE-2026-42023 · Other software · totolink · reported by talos-cna@cisco.comCritical 9.1

  Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup static network configuration functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the static_ipv6 parameter.

  Product

  Totolink

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordtalosintelligence.com

• Oct 20, 2026Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup static network configuration functionality of Totolink X2000R TOTOLINK-X2000CVE-2026-42022 · Other software · totolink · reported by talos-cna@cisco.comCritical 9.1

  Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup static network configuration functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the static_dns2 parameter.

  Product

  Totolink

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordtalosintelligence.com

• Oct 20, 2026Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup static network configuration functionality of Totolink X2000R TOTOLINK-X2000CVE-2026-42021 · Other software · totolink · reported by talos-cna@cisco.comCritical 9.1

  Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup static network configuration functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the static_dns1 parameter.

  Product

  Totolink

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordtalosintelligence.com

• Oct 20, 2026Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup pppoe functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1CVE-2026-42020 · Other software · totolink · reported by talos-cna@cisco.comCritical 9.1

  Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup pppoe functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the pppoe_dns2 parameter.

  Product

  Totolink

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordtalosintelligence.com

• Oct 20, 2026Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup pppoe functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1CVE-2026-42019 · Other software · totolink · reported by talos-cna@cisco.comCritical 9.1

  Multiple stack-based buffer overflow vulnerabilities exist in the boa formIpv6Setup pppoe functionality of Totolink X2000R TOTOLINK-X2000R-Gh-V1.0.0-B20250421.1327. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger these vulnerabilities. This vulnerability concerns the pppoe_dns1 parameter.

  Product

  Totolink

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordtalosintelligence.com

• Oct 18, 2026An IPv6 FlowSpec validation bypass in the CZ.NIC BIRD Internet Routing Daemon allows an established BGP peer to inject FlowSpec rules matching destinations outsCVE-2026-112112 · Other software · nic · reported by MITRELow 2.3

  An IPv6 FlowSpec validation bypass in the CZ.NIC BIRD Internet Routing Daemon allows an established BGP peer to inject FlowSpec rules matching destinations outside the address space authorized by the unicast-route validation procedure. With validation enabled on the receiving flow6 channel, BIRD fails to reject a destination prefix component with a nonzero offset, contrary to RFC 8956 section 5. It validates a reconstructed prefix with zero-filled skipped bits, although the original FlowSpec component can match a broader set of IPv6 addresses. Given a suitable unicast route from the peer, the rule can pass validation and, where export policy permits, be propagated to downstream peers. Downstream enforcement may cause unauthorized traffic filtering or redirection.

  Product

  BIRD

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgitlab.nic.czgitlab.nic.cz

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: net: extend IPv6 exthdr detection of tunneled packets Commit c4336a07eb6b ("net: correctlyCVE-2026-98852 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: extend IPv6 exthdr detection of tunneled packets Commit c4336a07eb6b ("net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback") split skb_gso_has_extension_hdr() into mutually exclusive branches on skb->encapsulation. This did not yet address all paths: 1. With skb->encapsulation set, the outer header is not checked. IPv6 tunnels such as ip6_gre and ip6_tunnel add an outer Destination Options header by default (encap_limit). Their GSO packets skip software GSO, then skb_csum_hwoffload_help() sees the outer extension header and calls skb_checksum_help() on the GSO skb, which warns and drops it. 2. Tunnels over IPv6 without an outer transport header, such as ip6_tunnel, leave skb->transport_header at the inner transport header. skb_network_header_len() then spans the outer IPv6, tunnel and inner IP headers, a false positive. 3. UDP tunnels without an inner network header, such as SCTP-in-UDP or PSP, have no inner IPv6 header to check. Decide on the outer header alone. 4. Directly dereferencing inner_ip_hdr(skb)->version without skb_header_pointer() is unsafe. Ins

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: seg6: ensure packet data is writable before modifying SRH and IPv6 DA advance_nextseg() moCVE-2026-98802 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: seg6: ensure packet data is writable before modifying SRH and IPv6 DA advance_nextseg() modifies the SRH Segments Left field and the IPv6 destination address without ensuring the packet data is writable. seg6_next_csid_advance_arg() has the same problem when it advances the NEXT-C-SID argument in the destination address. The skb may be cloned, for example by an AF_PACKET socket receiving on the ingress device. advance_nextseg() and seg6_next_csid_advance_arg() then write into the packet data shared with the clone. A read from that socket can return the modified packet instead of the received one. The simplified path below shows this for advance_nextseg(): __netif_receive_skb_one_core __netif_receive_skb_core deliver_skb [orig: users=2, cloned=0] packet_rcv skb_clone clone queued to the AF_PACKET socket consume_skb(orig) [orig: users=1, cloned=1] ipv6_rcv ip6_rcv_core skb_share_check: no-op [orig: users=1] [...] input_action_end_core advance_nextseg writes into the data shared with the clone Call skb_ensure_writ

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: Prevent rt6_insert_exception() for dying fib6_info.CVE-2026-98598 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: Prevent rt6_insert_exception() for dying fib6_info. Before the cited commit, fib6_nh_flush_exceptions() always set from->exception_bucket_flushed = 1 under rt6_exception_lock to prevent rt6_insert_exception() from inserting a new exception for a dying fib6_info. The flag was replaced with the FIB6_EXCEPTION_BUCKET_FLUSHED bit stored in nh->rt6i_exception_bucket. The problem is that now the bit is only set when the bucket is not NULL and fib6_nh_flush_exceptions() is called from fib6_nh_release() after fib6_ref has already reached zero. If rt6_insert_exception() is called while the target fib6_info is being removed via fib6_purge_rt(), a new exception could be created successfully because rt6_flush_exceptions() no longer sets the bit. This creates a reference cycle between the fib6_info and the exception route, leaking the fib6_info, its nexthop device, and all per-CPU routes in fib6_nh->rt6i_pcpu, which stalls netdev unregistration. [ 34.680602] unregister_netdevice: waiting for gre6 to become free. Usage count = 68 [ 44.920675] unregister_netdevice: waiting for gre6 to become free. Usage count = 6

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix dst leak for uncached routes.CVE-2026-98596 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix dst leak for uncached routes. ip6_route_output_flags(), ip6_rt_put_flags(), and ip6_dst_check() detect an uncached route by list_empty(&rt->dst.rt_uncached), which replaced the static DST_NOCACHE flag check in commit a4c2fd7f7891 ("net: remove DST_NOCACHE flag"). When a device is unregistered, rt6_uncached_list_flush_dev() unlinks uncached routes tied to the device from rt6_uncached_list. Previously, they were moved to another list with list_move() (__list_del_entry() + list_add()), and since commit 98aa546af5e4 ("inet: remove (struct uncached_list)->quarantine"), the routes are just unlinked with list_del_init(). If list_del_init() runs concurrently, list_empty() evaluates to true; ip6_route_output_flags() calls dst_hold_safe() incorrectly and ip6_rt_put_flags() skips ip6_rt_put(), leaking dst, and thus dev tied via rt->from as well. The same race is partially fixed by commit 9a6f0c4d5796 ("dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list()"). Let's check rt6->dst.rt_uncached_list instead. Note that IPv4 does not have the same issue.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6() skb_maybe_pull_tail() sCVE-2026-98573 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6() skb_maybe_pull_tail() subtracts skb_headlen(skb) from the unsigned max argument and passes the result to __pskb_pull_tail() as a signed int. The function does not ensure that max is at least skb_headlen(skb). This can happen while parsing IPv6 extension headers when an skb already has a linear area larger than MAX_IPV6_HDR_LEN. Once the parser needs data beyond the linear area, max - skb_headlen(skb) wraps and is converted to a negative delta. __pskb_pull_tail() then passes that negative length to skb_copy_bits(), where it can become a very large copy length. Pass the requested length itself as the pull bound at the three extension-header call sites, so the delta can no longer go negative.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: net: ipv6: keep room for the mac header in dst_dev_overhead() The seg6, ioam6 and rpl lwtuCVE-2026-98570 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: ipv6: keep room for the mac header in dst_dev_overhead() The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as the length they are about to push plus dst_dev_overhead(), then push the new headers and rebuild the mac header below them with skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom, but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device, 16 bytes for plain Ethernet. Where the mac header is longer than that, as it is on ingress through a VLAN device with reorder_hdr off, the rebuild runs out of room: skb_set_mac_header(skb, -skb->mac_len) computes a negative offset, stores it unchecked in the u16 skb->mac_header, and the memmove that follows writes skb->mac_len bytes about 64 KB past skb->head. Forwarding plain ping6 traffic through such a device reproduces it on all five seg6 encapsulation modes and on the rpl and ioam6 inline paths; skb->mac_header comes back as 65534 on a 704-byte head. Return the larger of the two. The helper already returns skb->mac_len when it has no dst, so this only makes the other branch agree, and it covers every caller

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: do not let ipv6_find_hdr() return an offset past the packet end ipv6_find_hdr() walkCVE-2026-98532 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: ipv6: do not let ipv6_find_hdr() return an offset past the packet end ipv6_find_hdr() walks the extension header chain, skipping each header by the length that header itself declares. ipv6_optlen() returns up to 2048, and the skip is never checked against skb->len, so the offset stored in *offset can point past the end of the packet. openvswitch installs that offset as the transport header, and update_ipv6_checksum() then reads and writes the transport checksum field out of bounds: BUG: KASAN: slab-use-after-free in inet_proto_csum_replace16+0x445/0x470 Read of size 2 at addr ffff88810b754b06 by task ovs_ipv6_oob/629 CPU: 4 UID: 1000 PID: 629 Comm: ovs_ipv6_oob Tainted: G N 7.3.0-rc3+ #348 Call Trace: inet_proto_csum_replace16+0x445/0x470 set_ipv6_addr+0x3dd/0x460 do_execute_actions+0x6a3d/0x7c40 ovs_execute_actions+0xfd/0x480 ovs_packet_cmd_execute+0xc38/0xf20 genl_rcv_msg+0x59e/0x870 netlink_rcv_skb+0x18b/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x6bc/0xa20 The buggy address belongs to the object at ffff88810b754980 which belongs to the cache skbuff_small_head of size

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: enforce exact attribute length for SEG6_ATTR_DST In seg6_genl_policy, SEG6_ATTR_CVE-2026-98531 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: enforce exact attribute length for SEG6_ATTR_DST In seg6_genl_policy, SEG6_ATTR_DST is defined with .type = NLA_BINARY and .len = sizeof(struct in6_addr). For NLA_BINARY, .len only enforces the maximum payload length and permits shorter payloads (e.g., 0 bytes). When seg6_genl_set_tunsrc() copies sizeof(struct in6_addr) bytes via kmemdup(val, sizeof(*val), GFP_KERNEL), a short SEG6_ATTR_DST attribute triggers a 16-byte out-of-bounds read past skb->tail into uninitialized skb->head memory, which is stored in sdata->tun_src and leaked back to userspace via SEG6_CMD_GET_TUNSRC. Switch SEG6_ATTR_DST in seg6_genl_policy to NLA_POLICY_EXACT_LEN(sizeof(struct in6_addr)) so that generic netlink validation rejects any attribute whose length is not exactly sizeof(struct in6_addr) with -ERANGE. Tested in QEMU against Linux 7.3.0-rc3 by sending a SEG6_CMD_SET_TUNSRC Generic Netlink message with a 0-byte SEG6_ATTR_DST attribute followed by SEG6_CMD_GET_TUNSRC. On the unfixed kernel, SEG6_CMD_SET_TUNSRC succeeds (err = 0) and SEG6_CMD_GET_TUNSRC leaks 16 bytes of uninitialized kernel heap memory (tun_src = 836a61ec

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix swapped IPv6 IPsec policy masks IPv6 XFRM policies may use different sourceCVE-2026-98497 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix swapped IPv6 IPsec policy masks IPv6 XFRM policies may use different source and destination prefix lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks independently, but setup_fte_addr6() installs each mask in the opposite address field. When the prefix lengths differ, this makes the source match use the destination prefix and the destination match use the source prefix. The resulting hardware rule can both miss traffic covered by the policy and match traffic outside it. Install each mask in its corresponding match field.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 16, 2026Improper verification of the source of a communication channel in the IPv6 Router Advertisement handler in Amazon FreeRTOS-Plus-TCP before V4.4.2 might allow a CVE-2026-102551 · Other software · FreeRTOS · reported by ff89ba41-3aa1-4d27-914a-91399e9639e5Critical 9.2

  Improper verification of the source of a communication channel in the IPv6 Router Advertisement handler in Amazon FreeRTOS-Plus-TCP before V4.4.2 might allow a remote third-party to influence an endpoint's IPv6 default gateway, on-link prefix, and address configuration via a crafted Router Advertisement. To remediate this issue, users should upgrade to version V4.4.2.

  Product

  FreeRTOS-Plus-TCP

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordaws.amazon.comgithub.com

• Oct 15, 2026The IPv6 UDP send path for unconnected sockets did not apply the jail policy of rewriting a loopback destination address to the jail's primary IPv6 address.CVE-2026-101303 · Other software · FreeBSD · reported by secteam@freebsd.orgHigh 7.5

  The IPv6 UDP send path for unconnected sockets did not apply the jail policy of rewriting a loopback destination address to the jail's primary IPv6 address. A process in a classic (non-VNET) jail can send UDP datagrams to services listening on the host's IPv6 loopback address, bypassing jail network isolation.

  Product

  FreeBSD

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordsecurity.freebsd.org

• Oct 13, 2026Lancet through 2.3.9 contains an SSRF protection bypass vulnerability in netutil.IsInternalIP that misclassifies IPv6 private, link-local, CGNAT and transition CVE-2026-110240 · Other software · duke-git · reported by VulnCheckMedium 6.3

  Lancet through 2.3.9 contains an SSRF protection bypass vulnerability in netutil.IsInternalIP that misclassifies IPv6 private, link-local, CGNAT and transition addresses as external. Attackers can supply hostnames resolving to these address forms, including NAT64, 6to4 or Teredo embedding internal IPv4, to reach internal services or cloud metadata endpoints.

  Product

  lancet

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 11, 2026net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop's link-layer address with net_nbr_get_lladdr(nbr->idx) without first checking whetherCVE-2026-19577 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.1

  net_route_ipv6_packet() in subsys/net/ip/route_ipv6.c resolved the nexthop's link-layer address with net_nbr_get_lladdr(nbr->idx) without first checking whether the neighbor cache entry actually had a linked link-layer address. An unresolved neighbor carries idx == NET_NBR_LLADDR_UNKNOWN (0xff), and net_nbr_get_lladdr() in subsys/net/ip/nbr.c performs no runtime bounds check beyond a NET_ASSERT, returning &net_neighbor_lladdr[255] — roughly 2.5 KB past the end of an array whose default size is CONFIG_NET_IPV6_MAX_NEIGHBORS (8). Because the returned pointer is never NULL, the following lladdr == NULL guard does not catch it. The function is reached from ipv6_route_packet() in subsys/net/ip/ipv6.c for every received unicast IPv6 packet whose destination is not a local address on the receiving interface; CONFIG_NET_IPV6_ROUTE is enabled by default whenever the IPv6 neighbor cache is, so no router or forwarding configuration is needed. net_route_ipv6_get_info() returns the packet's destination itself as the nexthop when a neighbor cache entry for it exists, and the cache lookup does not skip INCOMPLETE entries. An unauthenticated attacker on the same link can therefore force the unres

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 7, 2026A vulnerability in the Segment Routing over IPv6 (SRv6) Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software, known as NGOAM, could CVE-2026-76501 · Network & remote access · Cisco · reported by psirt@cisco.comCritical 9.8

  A vulnerability in the Segment Routing over IPv6 (SRv6) Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software, known as NGOAM, could allow an unauthenticated, remote attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) on an affected device. This vulnerability is due to improper input validation of IP traffic when the NGOAM and SRv6 features are enabled. An attacker could exploit this vulnerability by sending crafted packets to an IP interface on an affected device. A successful exploit could allow the attacker to execute arbitrary code with root privileges and could cause process crashes resulting in a reload and DoS condition.

  Product

  Cisco NX-OS Software

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordsec.cloudapps.cisco.com

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm: use full sockets in local error paths xfrm6_local_rxpmtu() and xfrm6_local_errCVE-2026-98241 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm: use full sockets in local error paths xfrm6_local_rxpmtu() and xfrm6_local_error() dereference skb->sk as if it always pointed at a full IPv6 socket. That is not guaranteed. TCP SYN-ACK skbs can be owned by a TCP_NEW_SYN_RECV request_sock while the output path itself is driven by the full listener. If rerouting selects an IPv6 XFRM tunnel route with a lower MTU, the local PMTU/error handling path can reach these callbacks with that mini-socket still attached to the skb. The callbacks then miscast the request socket as a full inet/IPv6 socket and can read beyond the request_sock allocation when they access inet_sock or ipv6_pinfo state. Resolve the owner with skb_to_full_sk() in both callbacks and bail out when no full socket is attached. This matches the surrounding XFRM IPv6 PMTU/error logic, which already reasons about full sockets with skb_to_full_sk().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 1, 2026TP-Link TL-WR841N contains an authenticated OS command injection vulnerability in the IPv6 WAN configuration.CVE-2026-102294 · Network & remote access · TP-Link System Inc. · reported by f23511db-6c3e-4e32-a477-6aa17d310630High 8.5

  TP-Link TL-WR841N contains an authenticated OS command injection vulnerability in the IPv6 WAN configuration. A crafted IPv6 Gateway value is improperly incorporated into a system command, allowing an authenticated administrator to execute arbitrary operating system commands.  Successful exploitation may allow unauthorized access to sensitive information, modification of device configuration or services, and disruption of device operation.

  Product

  TL-WR841N v14

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordtp-link.comtp-link.com

• Sep 29, 2026anchorme through 3.0.8 contains a regular expression denial of service vulnerability in the IPv6 host extraction regex due to catastrophic backtracking.CVE-2026-103043 · Other software · alexcorvi · reported by VulnCheckHigh 8.7

  anchorme through 3.0.8 contains a regular expression denial of service vulnerability in the IPv6 host extraction regex due to catastrophic backtracking. Attackers can supply specially crafted input strings with repeated patterns to cause exponential regex engine backtracking, blocking the Node.js event loop and denying service to other requests.

  Product

  anchorme

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgist.github.comgist.github.com

• Sep 28, 2026ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript.CVE-2026-101913 · Other software · beaugunderson · reported by GitHubMedium 6.3

  ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.5.1, the Address6 isLinkLocal method in src/ipv6.ts recognizes only fe80::/64 instead of the complete fe80::/10 IPv6 link-local range. An attacker-controlled address elsewhere in fe80::/10 can therefore pass a trust-boundary check that relies on isLinkLocal. The same address is identified as link-local by getType and getScope, exposing the inconsistent classification. A successful bypass can reach an on-link host outside the intended trust boundary. This issue is fixed in version 10.5.1.

  Product

  ip-address

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 28, 2026ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript.CVE-2026-101912 · Other software · beaugunderson · reported by GitHubMedium 6.3

  ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.7.1, the isInSubnet and isHostInSubnet methods in src/common.ts compare masked binary strings without validating that both operands use the same IP family. A cross-family containment check whose leading address bits match makes the masked strings compare equal even though IPv4 and IPv6 do not share an address space. An allowlist or denylist decision can therefore classify an address outside the intended range as contained. This issue is fixed in version 10.7.1.

  Product

  ip-address

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 28, 2026ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript.CVE-2026-101911 · Other software · beaugunderson · reported by GitHubMedium 6.3

  ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.7.1, the Address6 constructor, Address6.isValid, and parse code in src/ipv6.ts accept unbounded strings and expand invalid characters through RE_BAD_CHARACTERS into large diagnostics. Material impact occurs only when an application accepts a very large attacker-controlled field and passes it to Address6 parsing without an earlier length bound. Common URL and header limits, and common body-parser defaults, generally constrain the effect; common defaults typically exclude 32 MiB fields. Megabyte-scale fields can cause a synchronous stall and high transient memory use, approximately 16 MiB can trigger an invalid string length exception, and process termination occurs at approximately 32 MiB. The affected entry points include Address6.isValid and construction paths that reach parse. This issue is fixed in version 10.7.1.

  Product

  ip-address

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 28, 2026ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript.CVE-2026-101910 · Other software · beaugunderson · reported by GitHubMedium 6.9

  ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. From 10.2.0 until 10.5.1, the Address6 isPrivate classifier in src/ipv6.ts does not recognize the NAT64 local-use range 64:ff9b:1::/48. Applications that combine isPrivate, isLoopback, and isLinkLocal for a trust-boundary decision can treat an internal IPv4 destination encoded through that range as external. Exploitation depends on a server network using an operator-selected NAT64 prefix within the local-use range. A successful bypass can cross the intended network trust boundary. This issue is fixed in version 10.5.1.

  Product

  ip-address

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 25, 2026The IPv6 branch of the FastCGI client access check compares only the first 12 bytes of a 16-byte IPv6 address, so listen.allowed_clients matches on a /96 prefixCVE-2026-91768 · Websites & servers · PHP Group · reported by security@php.netMedium 6.5

  The IPv6 branch of the FastCGI client access check compares only the first 12 bytes of a 16-byte IPv6 address, so listen.allowed_clients matches on a /96 prefix instead of the exact address. An attacker who can source an address sharing the first 96 bits with an allowed one passes the check and reaches the FastCGI endpoint.

  Product

  PHP

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.com

• Sep 25, 2026Zoraxy versions 3.2.3 through 3.3.4 fail to properly parse IPv6 addresses in the RemoteAddr field when setting forwarded headers.CVE-2026-100390 · Other software · tobychui · reported by VulnCheckCritical 9.1

  Zoraxy versions 3.2.3 through 3.3.4 fail to properly parse IPv6 addresses in the RemoteAddr field when setting forwarded headers. Unauthenticated attackers connecting over IPv6 can supply arbitrary X-Forwarded-For values to spoof their source IP and bypass authorization provider IP-based access controls.

  Product

  zoraxy

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: fix RCU list diversion in ip6_mc_del1_src() When removing a source filter whoCVE-2026-98102 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: fix RCU list diversion in ip6_mc_del1_src() When removing a source filter whose count reaches zero, ip6_mc_del1_src() unlinks psf from pmc->mca_sources. If the filter was previously active, the code moved psf directly into pmc->mca_tomb by updating psf->sf_next. Because pmc->mca_sources is traversed locklessly under RCU (e.g. by ipv6_chk_mcast_addr()), mutating psf->sf_next before a grace period elapses diverts concurrent readers to the tombstone list. Consequently, readers miss remaining active sources in pmc->mca_sources and improperly examine deleted tombstone entries. Fix this by allocating a new tombstone node for pmc->mca_tomb (as done in sf_setstate()) and retiring the original psf via kfree_rcu().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use copy-on-write RCU updates in ip6_mc_source() pmc->sflist is read locklessCVE-2026-98101 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use copy-on-write RCU updates in ip6_mc_source() pmc->sflist is read locklessly under rcu_read_lock() by inet6_mc_check() during packet reception in the UDP and RAW multicast receive paths. ip6_mc_source() mutated psl->sl_addr and psl->sl_count in-place when adding or removing a source filter. Additionally, when expanding the filter buffer, newpsl was published via rcu_assign_pointer() before writing the new source into the array. Because 16-byte struct in6_addr writes are not atomic and array shifting is not synchronized with RCU readers, concurrent readers in inet6_mc_check() could read torn IPv6 addresses or observe duplicated/missed source entries. Fix this by switching ip6_mc_source() to copy-on-write RCU updates: allocate and fully populate newpsl before publishing it via rcu_assign_pointer(), and reclaim the old filter via kfree_rcu(), matching ip6_mc_msfilter(). Also remove the now unused IP6_SFBLOCK macro.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use rcu_assign_pointer() for __rcu list updates Several places in net/ipv6/mcCVE-2026-98099 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 4.7

  In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use rcu_assign_pointer() for __rcu list updates Several places in net/ipv6/mcast.c update RCU-protected lists (np->ipv6_mc_list, idev->mc_list, idev->mc_tomb) using direct pointer assignments instead of rcu_assign_pointer(): 1. In __ipv6_dev_mc_dec(), unlinking a group from idev->mc_list did: *map = ma->next; without rcu_assign_pointer() while concurrent readers traverse idev->mc_list locklessly under rcu_read_lock(). 2. In ipv6_sock_mc_drop() and __ipv6_sock_mc_close(), unlinking a group from np->ipv6_mc_list directly assigned *lnk = mc_lst->next and np->ipv6_mc_list = mc_lst->next without rcu_assign_pointer(), racing with lockless readers in inet6_mc_check(). 3. In __ipv6_sock_mc_join(), mc_lst->next was initialized to np->ipv6_mc_list via raw assignment before publishing mc_lst. 4. In mld_del_delrec() and __ipv6_dev_mc_inc(), __rcu source pointers passed into rcu_assign_pointer() lacked explicit dereference helpers. Fix these by consistently using rcu_assign_pointer() along with mc_dereference() / sock_dereference().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: restore network header before routing and forwarding ipv6_srh_rcv() runs with skCVE-2026-98096 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.4

  In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: restore network header before routing and forwarding ipv6_srh_rcv() runs with skb->data at the Segment Routing Header (SRH) while skb_network_header() points at the IPv6 header. When segments_left > 0, ipv6_srh_rcv() previously restored the skb->data position by pushing sizeof(struct ipv6hdr), assuming the SRH immediately followed the fixed IPv6 header. If another extension header (such as a Hop-by-Hop options header) precedes the SRH, skb_network_offset() remained negative. This led to two problems: 1. During ip6_route_input(), fib6_rules_early_flow_dissect() invokes __skb_flow_dissect() which passes the negative skb_network_offset() to flow dissection, breaking BPF and C flow dissector logic. 2. If forwarded via ip6_forward() or redirected via act_mirred, downstream handlers (like sch_fragment() or neighbour output) pass the negative offset as an unsigned length, triggering OOB memcpy or buffer overflows. Fix this by pushing -skb_network_offset(skb) before routing, ensuring skb_network_offset(skb) is 0 for route lookup / flow dissection as well as downstream forwarding. On the loopback

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: ipv6: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork-CVE-2026-97984 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: ipv6: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP6_MAX_MTU for UDP sockets to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IPV6_MTU_DISCOVER is set to IPV6_PMTUDISC_DO or IPV6_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce (included in the new selftest): 1. Set device MTU bigger than IP6_MAX_MTU. cork->base.fragsize will be set to that MTU in ip6_setup_cork. 2. Set IPV6_MTU_DISCOVER to IPV6_PMTUDISC_PROBE or IPV6_PMTUDISC_DO. It lets maxnonfragsize be set to device MTU (cork->fragsize) in __ip6_append_data, rather than to IP6_MAX_MTU. 3. Send 65528 bytes of payload (+8 bytes of UDP header, +40 bytes of IPv6 header). Device MTU allows it (it's only one byte bigger than IP6_MAX_MTU, and the device MTU is bigger than that). 4. The UDP length in the built packet is 65536, which overflows the 16-bit length field and triggers the WARN in udp_set_len_short. To avoid breaking sending UDP jumbograms over raw IPv6 sockets, limit the

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings() syzbot reported a nCVE-2026-97974 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings() syzbot reported a null-ptr-deref in __ip6_del_rt_siblings() [0]. The stack trace hinted towards a null dereference of rt->fib6_node when fn->leaf is accessed in __ip6_del_rt_siblings(). With RTNL_FLAG_DOIT_UNLOCKED set, inet6_rtm_delroute() operations run concurrently without acquiring the RTNL lock. In ip6_route_del(), the route lookup happens under rcu_read_lock() without acquiring table->tb6_lock. Between ip6_route_del() looking up the route and __ip6_del_rt_siblings() acquiring table->tb6_lock, another thread can modify the routing table. For example, when an ECMP route is replaced via RTM_NEWROUTE with NLM_F_REPLACE, fib6_add_rt2node() unlinks all old siblings and sets iter->fib6_node = NULL. A reproducer was found that triggers this [1]. Add a check to ensure rt->fib6_node is non-null before accessing it. [0] KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] RIP: 0010:__ip6_del_rt_siblings+0x31e/0x7c0 net/ipv6/route.c:4056 Call Trace: <TASK> ip6_route_del+0x1054/0x1110 net/ipv6/route.c:4232 inet6_rtm_delroute+

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: fix fib6 walker UAF on seq stop ipv6_route_iter_active() treats a walker in FWS_U atCVE-2026-97940 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ipv6: fix fib6 walker UAF on seq stop ipv6_route_iter_active() treats a walker in FWS_U at the table root as already unlinked. fib6_del_route() can move a still-linked walker into that same state when the current leaf is the last route at the root, so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq private object can then be freed while it remains on net->ipv6.fib6_walkers. A later route deletion walks the dangling list and uses the freed walker. Use the list head as membership state and reinitialize it when unlinking. Keep the existing w->node check so a never-started iterator with a zeroed private object is not treated as linked. The same stop helper is used by /proc/net/ipv6_route and by the BPF ipv6_route iterator. The BPF show path only widens the race.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: flowlabel: cap duplicate leases per socket ipv6_flowlabel_get() allocates an ipv6_flCVE-2026-97597 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: flowlabel: cap duplicate leases per socket ipv6_flowlabel_get() allocates an ipv6_fl_socklist entry for every successful GET. The recheck path for a compatible existing flowlabel links another lease without applying any lease admission check. Repeated GET requests for one shareable label can therefore grow a socket's lease list without bound. Reject a new unprivileged lease once the socket already holds FL_MAX_PER_SOCK leases. Check this on the shared recheck path so reuse of a globally interned label, including the fl_intern() collision path, is covered as well. New-label admission remains under the existing mem_check() policy. Use capable(CAP_NET_ADMIN) rather than ns_capable(), matching mem_check(). An unprivileged user must not bypass the cap by creating a user namespace and a netns where they have CAP_NET_ADMIN, which would still consume host memory. Check the capability only when the socket reaches the limit, so successful unprivileged GET requests below the cap do not generate a capability audit. Do the admission check before updating linger and expires so a rejected GET does not refresh the share

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: addrconf: fix temp address generation after prefix deprecation When a router temporaCVE-2026-97472 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: addrconf: fix temp address generation after prefix deprecation When a router temporarily deprecates an IPv6 prefix (either by sending a Router Advertisement with Preferred Lifetime = 0 or by letting the lifetime expire) and later restores it, the kernel permanently loses its ability to generate temporary privacy addresses (RFC 8981) for that prefix. This happens because the address worker attempts to generate a replacement temporary address when the current one nears expiration. As the base prefix is deprecated already, the generation fails after marking the temporary address as already having spawned a replacement (ifp->regen_count++). When the router eventually restores the prefix, the temporary address becomes active again. However, once it naturally expires, the address worker sees this temporary address already tried to generate one and skips the regeneration. Fix the issue by resetting the regen_count check of the latest temp address generated for the prefix updated by the incoming RA.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU iterator to dump route exceptions rt6_nh_dump_exceptions() uses hlist_for_eaCVE-2026-93226 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU iterator to dump route exceptions rt6_nh_dump_exceptions() uses hlist_for_each_entry() to iterate over RCU-protected exception lists. The caller holds rcu_read_lock(), but does not hold rt6_exception_lock, so rt6_insert_exception() can concurrently add an entry with hlist_add_head_rcu(). KCSAN reports this race (irrelevant details omitted): ================================================================== BUG: KCSAN: data-race in rt6_insert_exception / rt6_nh_dump_exceptions write (marked) to 0xffff8a7c44c59620 of 8 bytes by interrupt on cpu 5: rt6_insert_exception+0x3bb/0x760 __ip6_rt_update_pmtu+0x4fe/0x750 ip6_sk_update_pmtu+0x19a/0x3b0 udpv6_err+0x3ff/0x800 icmpv6_notify+0x1e1/0x440 icmpv6_rcv+0x8c0/0xab0 ip6_protocol_deliver_rcu+0x616/0x840 ip6_input_finish+0xb9/0x160 ... entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff8a7c44c59620 of 8 bytes by task 549 on cpu 14: rt6_nh_dump_exceptions+0xb3/0x260 rt6_dump_route+0x53e/0x5f0 fib6_dump_node+0x6d/0xf0 fib6_walk_continue+0x290/0x2d0 fib6_dump_table+0x28d/0x360 inet

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 18, 2026ArcadeDB versions before 26.9.1 fail to validate IPv6 transition addresses in the SSRF guard used by IMPORT DATABASE and server commands.CVE-2026-93597 · Other software · ArcadeData · reported by VulnCheckMedium 5.3

  ArcadeDB versions before 26.9.1 fail to validate IPv6 transition addresses in the SSRF guard used by IMPORT DATABASE and server commands. Authenticated attackers can supply URLs resolving to NAT64, 6to4, or Teredo addresses embedding RFC 1918 or loopback IPv4 payloads to reach internal services and cloud metadata endpoints.

  Product

  arcadedb

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.