Vulnerability database

1,235 results · page 1 of 25

• Oct 28, 2026Alpine iLX-F511 Bluetooth OBEX Packet Handling Heap-based Buffer Overflow Remote Code Execution Vulnerability.CVE-2026-118611 · Other software · Alpine · reported by zdi-disclosures@trendmicro.comMedium 6.8

  Alpine iLX-F511 Bluetooth OBEX Packet Handling Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows physically present attackers to execute arbitrary code on affected installations of Alpine iLX-F511 devices. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of Bluetooth OBEX packets. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-29012.

  Product

  iLX-F511

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordzerodayinitiative.com

• Oct 26, 2026In the Bluetooth Classic Hands-Free Profile Audio Gateway role, hfp_ag_create() in subsys/bluetooth/host/classic/hfp_ag.c starts an SDP discovery toward the peeCVE-2026-82389 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.5

  In the Bluetooth Classic Hands-Free Profile Audio Gateway role, hfp_ag_create() in subsys/bluetooth/host/classic/hfp_ag.c starts an SDP discovery toward the peer, which links the embedded ag->sdp_param._node into the SDP client's pending request list in subsys/bluetooth/host/classic/sdp.c. If the subsequent bt_rfcomm_dlc_connect() call fails, bt_hfp_ag_connect() cleaned up by memset()-ing the entire AG object while that node was still linked, and while ag->slc_work could still be queued on the system work queue. An in-flight SDP discovery cannot be cancelled — bt_sdp_discover_cancel() is declared in the public header but has no implementation — so the request stays in the list with its func, pool and uuid pointers zeroed. The RFCOMM channel passed to bt_hfp_ag_connect() is taken from the peer's own SDP Hands-Free service record in the normal AG flow (bt_sdp_get_proto_param() performs no range validation, and samples/bluetooth/classic/handsfree_ag feeds the value straight through), so a remote BR/EDR device in radio range that advertises an RFCOMM channel outside the valid range 0x01..0x1e deterministically forces bt_rfcomm_dlc_connect() to fail and reach the wipe. Reading the peer

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026bt_hfp_hf_connect() in subsys/bluetooth/host/classic/hfp_hf.c allocates the per-connection HFP Hands-Free object with hfp_hf_create(), which starts an SDP discoCVE-2026-82388 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.3

  bt_hfp_hf_connect() in subsys/bluetooth/host/classic/hfp_hf.c allocates the per-connection HFP Hands-Free object with hfp_hf_create(), which starts an SDP discovery by passing the object's embedded hf->sdp_param to bt_sdp_discover(). That call links the caller-owned parameter block into the SDP client's request list (session->reqs in subsys/bluetooth/host/classic/sdp.c). If the subsequent bt_rfcomm_dlc_connect() then failed, the affected code wiped the entire object with (void)memset(new_hf, 0, sizeof(*new_hf)) while that discovery was still outstanding, zeroing the sys_snode_t _node that is still linked in the SDP client's list along with the request's func, uuid and pool pointers, and zeroing the hf->slc_work work item that may already be queued on the system workqueue. The discovery could not be retracted instead: bt_sdp_discover_cancel() is declared in include/zephyr/bluetooth/classic/sdp.h but has no implementation. The failing branch is reachable with peer-supplied input. The documented use of bt_hfp_hf_connect() is to pass the RFCOMM channel read out of the remote Audio Gateway's SDP record; neither bt_sdp_get_proto_param() nor bt_hfp_hf_connect() range-checks that value, s

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026The Bluetooth host pre-allocates a bt_conn object (a "reservation") from the fixed acl_conns[] pool for every connectable advertising set it starts, in le_adv_sCVE-2026-81039 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 4.3

  The Bluetooth host pre-allocates a bt_conn object (a "reservation") from the fixed acl_conns[] pool for every connectable advertising set it starts, in le_adv_start_add_conn() in subsys/bluetooth/host/adv.c. When an incoming peripheral connection completes, find_pending_connect() in subsys/bluetooth/host/hci_core.c looked that reservation up using only the identity and the peer address, with a directed-then-undirected fallback, and had no knowledge of which advertising set actually terminated. With CONFIG_BT_EXT_ADV_MAX_ADV_SET > 1, where the LE Enhanced Connection Complete event is cached until the LE Advertising Set Terminated event identifies the set, this lookup can return the reservation belonging to a different, still-running advertising set. The defect is reachable over the air by any adjacent device. If an application runs two connectable extended advertising sets on the same identity — one undirected and one directed at a peer P (the common "directed reconnect to a bonded central while still accepting new centrals" pattern) — a remote initiator whose address maps to P connecting on the undirected set causes the directed set's reservation to be consumed instead. The initia

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.CVE-2026-81038 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.1

  The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the requested op code was BT_GATT_OTS_OACP_PROC_CHECKSUM_CALC, regardless of the result code. The response payload is a bare, uninitialized four-byte stack buffer declared with NET_BUF_SIMPLE_DEFINE(resp_param, sizeof(uint32_t)) in bt_gatt_ots_oacp_write(), and it is filled only on the success path of oacp_checksum_proc_validate(). On every failure path the buffer is still empty, so net_buf_simple_pull_le32() was invoked on a zero-length buffer. The OACP characteristic and its client characteristic configuration descriptor are declared with BT_GATT_PERM_WRITE and BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, so no pairing, encryption, or authentication is required. Any peer within radio range that can connect to a device running the OTS server can enable OACP indications and write a nine-byte Calculate Checksum command that fails validation — for example by issuing it with no object selected, which returns BT_GATT_OTS_OACP_RES_INV_OBJ. Because oacp_comma

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix TX descriptor bounds check btintel_pcie_prepare_tx() uses tfdCVE-2026-99094 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix TX descriptor bounds check btintel_pcie_prepare_tx() uses tfd_index to access the TFD and data buffer arrays before the index is advanced modulo txq->count. An index equal to txq->count is one past the end of both arrays, so reject it in the bounds check.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 26, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix status of pending commands flushed on power off cmd_complete_rsp() reCVE-2026-99091 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix status of pending commands flushed on power off cmd_complete_rsp() receives a struct cmd_lookup and, for a pending command that has no cmd_complete callback, falls through to cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so the status sent comes from the first byte of match->sk's representation, not from match->mgmt_status. commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") changed the callers' data from &status to &match and updated the cmd_complete branch to match->mgmt_status, but left the fall-through passing data unchanged. In mgmt_index_removed() match->sk is NULL, so every such command is answered with status 0x00 (Success) instead of MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too, unless a Set Powered command was pending: then settings_rsp() has stored that command's socket in match->sk, and the byte sent comes from the socket pointer. Either way the status the caller set, MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device is being unregistered), is lost. Pass the status the callers set. This wa

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 23, 2026The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB CVE-2026-79982 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 8.8

  The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB transfer buffer before enqueuing it on an endpoint. bt_hci_tx_sync_in() allocated that buffer from bt_hci_ep_pool, a fixed pool whose slots are only USBD_MAX_BULK_MPS bytes (64 on full-speed-only builds), and then performed net_buf_add_mem(buf, bt_buf->data, bt_buf->len) with no length check. HCI event and ACL buffers are sized by CONFIG_BT_BUF_EVT_RX_SIZE and CONFIG_BT_BUF_ACL_RX_SIZE and can be far larger, so the copy runs past the end of the 64-byte slot into the adjacent slots and into whatever follows the statically allocated pool. The device runs the local Bluetooth controller in raw HCI mode (CONFIG_BT_HCI_RAW), so the oversized packets originate over the air. With the HCI buffer sizes recommended for full-featured controllers, an unauthenticated attacker within Bluetooth range can supply the overflowing bytes: a connected peer that negotiates Data Length Extension can send ACL fragments up to CONFIG_BT_CTLR_DATA_LENGTH_MAX bytes, and an attacker that merely broadcasts extended advertising data reaches the same path

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Serialize dead-device detachment Rebinding an HCI socket after its coCVE-2026-99015 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Serialize dead-device detachment Rebinding an HCI socket after its controller is unregistered can race monitor control replay and crash the kernel. hci_sock_bind() clears hci_pi(sk)->hdev and drops the device reference under only the socket lock, whereas send_monitor_control_replay() holds hci_sk_list.lock for reading. Replay can observe a non-NULL hdev, then bind can clear it and drop the last reference before create_monitor_ctrl_open() reads hdev->id. This can cause a NULL pointer dereference if the pointer is reloaded, or a use-after-free if the old pointer is retained. The kernel reported: KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] RIP: 0010:create_monitor_ctrl_open+0x579/0x800 Call Trace: hci_sock_bind+0xd96/0x1190 __sys_bind+0x166/0x200 __x64_sys_bind+0x6d/0xb0 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f The same missing serialization lets hci_send_to_sock() select a socket for the old device and queue its frame after bind has detached the socket or installed a new binding. Take hci_sk_list.lock for writing when

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix command skb lifetime during scan setup During PA sync scan setup,CVE-2026-99014 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix command skb lifetime during scan setup During PA sync scan setup, hci_le_set_ext_scan_param_sync() gets the address used for the PA_LINK lookup from hci_sent_cmd_data(). The returned pointer borrows storage from sent_cmd or req_skb, without holding a reference to either skb. The scan worker runs on req_workqueue while hci_cmd_work() runs on the separate device workqueue. After the scan worker loads sent_cmd, the command worker can free and replace it before hci_sent_cmd_data() dereferences the skb. The command payload can also be freed between returning from the helper and comparing the address. The connection lookup's RCU critical section does not protect the command skb. KASAN reported: BUG: KASAN: slab-use-after-free in hci_sent_cmd_data+0x27c/0x2f0 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_sent_cmd_data+0x27c/0x2f0 hci_le_set_scan_param_sync+0x43a/0x850 hci_passive_scan_sync+0xb09/0x1460 hci_update_passive_scan_sync+0x47c/0x6e0 hci_le_pa_create_sync+0x200/0xa70 hci_cmd_sync_work+0x13c/0x290 Allocated by task 95: skb_clone+0x13f/0x340 hci_cmd

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Reject concurrent BIS listener setup iso_sock_listen() drops the socket loCVE-2026-99013 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Reject concurrent BIS listener setup iso_sock_listen() drops the socket lock before calling iso_listen_bis() to preserve the hdev->lock ordering. Two concurrent listen() calls on the same broadcast socket can therefore both observe BT_BOUND. Caller A can attach connA and release the locks, then caller B can acquire them and attach connB before A publishes BT_LISTEN. __iso_chan_add() checks whether connB already has a socket, but not whether the socket already has a connection. The second attachment overwrites iso_pi(sk)->conn, leaking the connA reference and leaving connA->sk intact. Socket teardown follows connB, so later events on connA can cause a stale socket access. Recheck BT_BOUND and require iso_pi(sk)->conn to be NULL after taking both the HCI device and socket locks in iso_listen_bis(). The connection check also covers the interval between attachment and publication of BT_LISTEN. Reject a competing setup with -EBADFD through the existing unlock path before allocating another connection. A recorded KASAN report from an instrumented kernel shows: BUG: KASAN: slab-use-after-free in is

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Serialize concurrent connect calls iso_sock_connect() checks the socket stCVE-2026-99012 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Serialize concurrent connect calls iso_sock_connect() checks the socket state before taking the socket lock and drops the lock again before setting up a connection. Two callers can both pass the admission check while the socket is open or bound. Caller A can copy its destination for route selection, then caller B can replace the socket destination before A binds or connects the CIS. A then uses B's destination with the route selected for its own request. B can also proceed after A attaches a connection and sets BT_CONNECT. For deferred BIS setup, B can bind a second BIS and overwrite iso_pi(sk)->conn, leaving the first connection's reference and conn->sk back-pointer stranded. Concurrent CIS connects can likewise replace the socket's connection. Later teardown only detaches the current connection, so a callback on the old connection can race with socket release and access a freed socket. KASAN reported: BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0 Call Trace: iso_sock_hold+0xf7/0x1b0 iso_conn_del+0x7b/0x1d0 iso_connect_cfm+0x186/0x16a0 hci_conn_failed+0x154/0x280

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: serialise sco_conn lifetime against sco_recv_scodata() sco_recv_scodata() CVE-2026-99011 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: serialise sco_conn lifetime against sco_recv_scodata() sco_recv_scodata() upgrades the weak hcon->sco_data back-pointer to a strong reference under hdev->lock: hci_dev_lock(hdev); hcon = hci_conn_hash_lookup_handle(hdev, handle); ... conn = sco_conn_hold_unless_zero(hcon->sco_data); hci_dev_unlock(hdev); but the pointer is cleared from the other side without that lock. When the last sco_conn reference is dropped, sco_conn_free() ran conn->hcon->sco_data = NULL; with no hdev->lock held, so the RX path could read hcon->sco_data and call kref_get_unless_zero() on an sco_conn that was concurrently freed: BUG: KASAN: slab-use-after-free in sco_conn_hold_unless_zero+0xbe/0x160 Write of size 4 by task kworker/u17:0 Workqueue: hci0 hci_rx_work Call Trace: sco_conn_hold_unless_zero+0xbe/0x160 sco_recv_scodata+0x13f/0x490 hci_rx_work+0x3af/0x730 kref_get_unless_zero() only guards against a zero refcount, not against the backing memory already being freed. Give hcon->sco_data an actual reference on the sco_conn it points to, so the object cannot b

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: free the skb when the DLC has no owner rfcomm_recv_data() hands the skbCVE-2026-99010 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: free the skb when the DLC has no owner rfcomm_recv_data() hands the skb to d->data_ready() and returns 0 without freeing it, so the callback owns the skb from that point on. The tty implementation frees it when the DLC has been detached from its device: static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb) { struct rfcomm_dev *dev = dlc->owner; if (!dev) { kfree_skb(skb); return; } The socket implementation returns without freeing it, and the skb is leaked. A connected DLC can have no owner: rfcomm_sock_destruct() clears d->owner, while the DLC itself stays on the session until it is closed. Data frames that arrive in that window still find d->state == BT_CONNECTED in rfcomm_recv_data() and are handed to the callback, one leaked skb each. The leak does not stop on its own either. The remote runs out of credits only once RFCOMM_RX_THROTTLED is set, and for a socket the only place that sets it is rfcomm_sk_data_ready() itself, below the return. rfcomm_process_dl

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex An RFCOMM connect() issCVE-2026-99009 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex An RFCOMM connect() issued while a BR/EDR link is being authenticated makes lockdep report a circular dependency, and the reported cycle is a real AB/BA between rfcomm_mutex and hdev->lock. rfcomm_security_cfm() is called from the HCI event path, which already holds hdev->lock: hci_rx_work() hci_event_packet() hci_cc_read_enc_key_size() [hdev->lock] hci_encrypt_cfm() [hci_cb_list_lock] rfcomm_security_cfm() [rfcomm_mutex] while an RFCOMM connect() from userspace takes the same two locks the other way round: rfcomm_sock_connect() rfcomm_dlc_open() [rfcomm_mutex] __rfcomm_dlc_open() rfcomm_session_create() kernel_connect() l2cap_sock_connect() l2cap_chan_connect() [hdev->lock] WARNING: possible circular locking dependency detected kworker/u131:1/1128 is trying to acquire lock: rfcomm_mutex, at: rfcomm_security_cfm+0x31/0x3e0 [rfcomm] but task is already holding lock: hci_cb_list_lock, at: hci_cc_read_enc_key_size+0x1d2/0xcc

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown syzbot hit a NULL pCVE-2026-99008 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix NULL tty_dev dereference in rfcomm_dev_shutdown syzbot hit a NULL pointer dereference in rfcomm_dev_shutdown() when an RFCOMM tty is closed. rfcomm_dev_add() puts the new device on rfcomm_dev_list first and only then registers the tty device and saves it in dev->tty_dev. If that registration fails, dev->tty_dev is never set at all. The device can be looked up in the meantime, so an open() of /dev/rfcommN gets through rfcomm_tty_install() and attaches to it. When that tty is closed again, rfcomm_dev_shutdown() uses dev->tty_dev without checking it: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] RIP: 0010:rfcomm_dev_shutdown+0x48/0xb0 net/bluetooth/rfcomm/tty.c:131 Call Trace: tty_port_shutdown+0x1bf/0x220 drivers/tty/tty_port.c:372 tty_port_close+0x4e/0x150 drivers/tty/tty_port.c:705 tty_release+0x359/0x1670 drivers/tty/tty_io.c:1718 __fput+0x418/0xa50 fs/file_table.c:512 rfcomm_dev_destruct() already copes with a NULL dev->tty_dev. Add the same check to rfcomm_dev_shutdown(), so

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 23, 2026An authentication vulnerability in the Bluetooth Low Energy (BLE) implementation of Creative Sound Blaster Katana could allow an attacker within Bluetooth rangeCVE-2026-63243 · Other software · Creative Labs · reported by 5f57b9bf-260d-4433-bf07-b6a79e9bb7d4Medium 4.3

  An authentication vulnerability in the Bluetooth Low Energy (BLE) implementation of Creative Sound Blaster Katana could allow an attacker within Bluetooth range to connect to an affected device without prior pairing or authentication.

  Product

  Creative Sound Blaster Katana V2, V2X, SE

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordcsa.gov.sg

• Oct 21, 2026The Infineon PSOC 6 BLESS HCI driver in drivers/bluetooth/hci/hci_infineon_psoc6_bless.c stored the outgoing HCI packet descriptor in a file-scope variable, staCVE-2026-78117 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 4.2

  The Infineon PSOC 6 BLESS HCI driver in drivers/bluetooth/hci/hci_infineon_psoc6_bless.c stored the outgoing HCI packet descriptor in a file-scope variable, static cy_stc_ble_hci_tx_packet_info_t hci_tx_pkt. psoc6_bless_send() cleared and populated that descriptor's packetType, dataLength and data fields before acquiring psoc6_bless_operation_sem, so the driver's serialising semaphore protected only the call into Cy_BLE_SoftHciSendAppPkt() and not the shared state that call reads. The Bluetooth host does not guarantee a single HCI sender. Most transmissions are funnelled through the cooperative TX-processor work queue, but bt_hci_cmd_send() deliberately bypasses bt_dev.cmd_tx_queue for BT_HCI_OP_HOST_NUM_COMPLETED_PACKETS and calls bt_send() directly from the caller's thread; that caller is bt_hci_host_num_completed_packets(), the acl_in_pool destroy callback, which runs on whichever thread drops the last reference to a received ACL buffer. CONFIG_BT_HCI_ACL_FLOW_CONTROL defaults to y on this driver's boards, and an application that returns -EINPROGRESS from its L2CAP recv callback and later calls bt_l2cap_chan_recv_complete() performs that unref from its own preemptible thread. A

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 21, 2026The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array.CVE-2026-18748 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgLow 3.5

  The Bluetooth Classic A2DP host stores a codec Information Element (IE) in struct bt_a2dp_codec_ie, a one-byte len field plus a fixed 8-byte codec_ie[] array. When an AVDTP peer sent a codec IE longer than 8 bytes, a2dp_process_config_ind() in subsys/bluetooth/host/classic/a2dp.c copied only the first 8 bytes but assigned the full, attacker-chosen length to len, and then persisted that inconsistent structure into the application's struct bt_a2dp_stream via stream->codec_config. bt_a2dp_get_config_cb() and bt_a2dp_set_config_cb() had the same truncate-the-copy-but-keep-the-length pattern. Every later consumer trusts len. In particular the responder for an incoming AVDTP GET_CONFIGURATION, a2dp_get_config_ind(), executes net_buf_add_mem(rsp_buf, &ep->stream->codec_config.codec_ie[0], ep->stream->codec_config.len), so a paired BR/EDR peer that first sends a SET_CONFIGURATION carrying an oversized codec IE and then requests the configuration back causes the stack to read up to roughly 245 bytes past the end of the 8-byte array and transmit them in the response. codec_config is the last member of struct bt_a2dp_stream, so the read runs into memory adjacent to the application's stream o

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 21, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content ofCVE-2023-7356 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 20, 2026Out of bounds read in Bluetooth in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to read memory inside the sandbox via a crafted HTML page.CVE-2026-113310 · Computers, phones & browsers · Google · reported by chrome-cve-admin@google.comMedium 6.5

  Out of bounds read in Bluetooth in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to read memory inside the sandbox via a crafted HTML page. (Chromium security severity: High)

  Product

  Chrome

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordchromereleases.googleblog.comissues.chromium.org

• Oct 20, 2026Memory corruption in Bluetooth in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTMLCVE-2026-113131 · Computers, phones & browsers · Google · reported by chrome-cve-admin@google.comHigh 8.8

  Memory corruption in Bluetooth in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium)

  Product

  Chrome

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordchromereleases.googleblog.comissues.chromium.org

• Oct 20, 2026Improper input validation in Bluetooth in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code inside the sandboCVE-2026-113060 · Computers, phones & browsers · Google · reported by chrome-cve-admin@google.comHigh 8.8

  Improper input validation in Bluetooth in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium)

  Product

  Chrome

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordchromereleases.googleblog.comissues.chromium.org

• Oct 20, 2026Memory corruption in Bluetooth in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a CVE-2026-113005 · Computers, phones & browsers · Google · reported by chrome-cve-admin@google.comHigh 8.8

  Memory corruption in Bluetooth in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium)

  Product

  Chrome

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordchromereleases.googleblog.comissues.chromium.org

• Oct 19, 2026The Bluetooth Classic Hands-Free Profile HF role in subsys/bluetooth/host/classic/hfp_hf.c does not release the AT command buffers that are still queued on hf->CVE-2026-77684 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.7

  The Bluetooth Classic Hands-Free Profile HF role in subsys/bluetooth/host/classic/hfp_hf.c does not release the AT command buffers that are still queued on hf->tx_pending when the RFCOMM DLC goes down. hfp_hf_disconnected() only cancelled the work items and cleared hf->acl, and no other code path ever dequeues those buffers, so each one is permanently lost from the fixed hf_pool (CONFIG_BT_MAX_CONN + 1 buffers, i.e. two in the default configuration). The same function also left BT_HFP_HF_FLAG_CONNECTED set, and hfp_hf_create() wiped the object with memset() as soon as hf->acl was NULL, without checking whether hf->work, hf->slc_work or hf->deferred_work was still pending or running. The remote Audio Gateway peer controls the trigger end to end and needs no application involvement: an unsolicited +BCS: 1 response makes bcs_handle() call bt_hfp_hf_select_codec() and queue an AT+BCS buffer, which cannot be transmitted while BT_HFP_HF_FLAG_RX_ONGOING is set, and an immediately following RFCOMM DISC strands that buffer. Repeating the connect / +BCS / disconnect cycle a couple of times empties hf_pool for good. With the pool exhausted, HFP command sending fails permanently, and because

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: validate DDC record lengths Parse DDC record lengths in unsigned storaCVE-2026-98819 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: validate DDC record lengths Parse DDC record lengths in unsigned storage so 0xFF does not wrap. Reject records smaller than the mandatory three-byte header, records exceeding U8_MAX, and records exceeding remaining firmware bytes before issuing Intel_Write_DDC. This issue was reported by Claude Mythos.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: don't drain cmd_sync backlog on unregister hci_unregister_dev() disabCVE-2026-98809 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: don't drain cmd_sync backlog on unregister hci_unregister_dev() disables cmd_work and cmd_timer, then calls hci_cmd_sync_clear(), whose cancel_work_sync() waits for hci_cmd_sync_work() to return. That worker dequeues and runs every entry on cmd_sync_work_list. With cmd_work disabled nothing reaches the controller, so each queued HCI command waits the full HCI_CMD_TIMEOUT (2s). The backlog has no bound. Userspace can keep queuing MGMT commands such as MGMT_OP_GET_CLOCK_INFO against a controller that doesn't answer. Closing /dev/vhci then blocks in vhci_release() for backlog * 2s: INFO: task syz-executor:5749 blocked for more than 143 seconds. cancel_work_sync hci_cmd_sync_clear hci_unregister_dev vhci_release In a local reproduction the backlog held more than 5000 entries, which comes to hours of hang. Stop the worker from taking new entries once HCI_UNREGISTER is set, and wake any request still waiting with -ENODEV before cancelling the work. The entries left over are destroyed with -ECANCELED by the existing sweep in hci_cmd_sync_clear(). They stay on the list until the wor

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix initial port reference race For RFCOMM_RELEASE_ONHUP devices, rfcomCVE-2026-98739 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix initial port reference race For RFCOMM_RELEASE_ONHUP devices, rfcomm_tty_install() and __rfcomm_release_dev() both use RFCOMM_TTY_OWNED to decide who drops the initial tty_port reference. The release path tests the bit separately from the install path setting it, so both can drop that reference. The synchronous hangup does not prevent this race: port->tty is not assigned until tty_port_open(), after installation. The following interleaving is possible: 1. Install and release each obtain a reference with rfcomm_dev_get(). 2. Release observes RFCOMM_TTY_OWNED clear. 3. Install sets RFCOMM_TTY_OWNED and drops the initial reference. 4. Release drops the same initial reference again. 5. TTY cleanup drops its reference and frees the device. 6. Release performs its final tty_port_put() on the freed port. KASAN reported: BUG: KASAN: slab-use-after-free in tty_port_put+0x22/0x190 Write of size 4 at addr ffff8881001d3d5c by task poc/92 Call Trace: tty_port_put+0x22/0x190 rfcomm_dev_ioctl+0x1d4/0x1930 sock_do_ioctl+0x110/0x260 sock_ioctl+0x380/0x590 __x64_sys_ioct

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Serialize SMP remote OOB data access build_pairing_cmd() looks up remote OOB daCVE-2026-98738 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Serialize SMP remote OOB data access build_pairing_cmd() looks up remote OOB data and copies its contents without holding hdev->lock, which serializes the list's writers. After SMP finds an entry, a concurrent management Remove Remote OOB Data command can unlink and free it before SMP reads its present flag or copies its random and confirmation values. Removal can also invalidate an entry while the lookup is still traversing the list. KASAN reported: BUG: KASAN: slab-use-after-free in build_pairing_cmd+0x948/0x9b0 Call Trace: build_pairing_cmd+0x948/0x9b0 smp_recv_cb+0x459f/0x8110 l2cap_recv_frame+0xf14/0x9190 l2cap_recv_acldata+0xa64/0xd40 hci_rx_work+0x4ca/0x730 Allocated by task 87: hci_add_remote_oob_data+0x11d/0x530 add_remote_oob_data+0x282/0x400 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 93: hci_remote_oob_data_clear+0x108/0x1c0 remove_remote_oob_data+0x198/0x220 hci_sock_sendmsg+0x1033/0x1ea0 Taking hdev->lock in build_pairing_cmd() would recurse for callers that already hold it and invert the device-to-L2CAP lock order on the receive path. Add a

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix inquiry cache use-after-free The sync command worker holds hdev->CVE-2026-98737 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix inquiry cache use-after-free The sync command worker holds hdev->req_lock, but inquiry-cache updates and flushes use hdev->lock. Both hci_acl_create_conn_sync() and hci_stop_discovery_sync() look up entries and read their fields without taking hdev->lock. After either lookup returns, a concurrent HCIINQUIRY ioctl can acquire hdev->lock and flush the cache, freeing the entry. The worker then reads the freed entry while preparing a create-connection or remote-name-cancel command. The list traversal also races with cache updates and removal. KASAN reported these accesses: BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0x5f1/0x650 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_acl_create_conn_sync+0x5f1/0x650 hci_cmd_sync_work+0x13c/0x290 Allocated by task 90: hci_inquiry_cache_update+0x3e6/0x7d0 hci_inquiry_result_evt+0x3cb/0x560 Freed by task 93: hci_inquiry_cache_flush+0x111/0x2b0 hci_inquiry+0x2f2/0x780 hci_sock_ioctl+0x269/0x5f0 BUG: KASAN: slab-use-after-free in hci_stop_discovery_sync+0x3b1/0x3c0 Workqueue: hci0 hci_cmd_sync_work

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Lock parent access during enhanced SCO setup Bluetooth: hci_conn: LocCVE-2026-98736 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Lock parent access during enhanced SCO setup Bluetooth: hci_conn: Lock parent access during enhanced SCO setup hci_enhanced_setup_sync() runs on the request workqueue without the hci_dev_lock held by its caller when setup was queued. Its CVSD capability check and find_next_esco_param() dereference conn->parent while the receive workqueue can unlink and release that parent. The following interleaving can cause a use-after-free: hci_enhanced_setup_sync() hci_disconn_complete_evt() load conn->parent hci_dev_lock() hci_conn_del(ACL parent) unlink SCO child drop link's parent reference clear child->parent release ACL parent bt_link_release() kfree(parent) hci_dev_unlock() read parent->features[0][3] The reference held for the queued SCO child does not keep its ACL parent a

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize ACL scheduling with channel deletion hci_chan_sent() selectCVE-2026-98735 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize ACL scheduling with channel deletion hci_chan_sent() selects a channel under RCU but drops the read lock before accessing chan->conn and returning the channel. The ACL and LE schedulers then use its packet queue and update its transmit counters without any protection against channel deletion. After TX selects a channel and releases RCU, a disconnect command timeout on the separate request workqueue can run hci_conn_failed() and l2cap_conn_del(). hci_chan_del() can then unlink the channel, complete synchronize_rcu(), purge its queue and free it before TX resumes. This causes use-after-free both in hci_chan_sent() and in its callers. KASAN reported: BUG: KASAN: slab-use-after-free in hci_chan_sent+0x892/0x9b0 Workqueue: hci0 hci_tx_work Call Trace: hci_chan_sent+0x892/0x9b0 hci_tx_work+0x5e6/0xb70 Allocated by task 91: hci_chan_create+0xe3/0x350 l2cap_conn_add.part.0+0x12/0xa30 l2cap_chan_connect+0x110d/0x1b60 l2cap_sock_connect+0x310/0x530 Freed by task 99: hci_chan_del+0x11f/0x170 l2cap_conn_del+0x4f1/0x800 l2cap_connect_cfm+0x88c/0xd30 hci

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown hci_low_sent() selectsCVE-2026-98734 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown hci_low_sent() selects a connection under RCU but drops the read lock before calculating its quota and returning it to the scheduler. The connection is then used without lifetime protection by hci_sched_iso() and hci_sched_sco(). After the TX worker drops the RCU read lock, hci_abort_conn_sync() on hdev->req_workqueue can remove the connection from the hash, complete synchronize_rcu(), purge its queues and release it. The TX worker on hdev->workqueue can then access the freed connection in hci_quote_sent() or while dequeuing packets and updating conn->sent. KASAN reported: BUG: KASAN: slab-use-after-free in hci_low_sent+0x730/0x840 Workqueue: hci0 hci_tx_work Call Trace: hci_low_sent+0x730/0x840 hci_sched_iso+0x25e/0x4d0 hci_tx_work+0x239/0xcb0 Allocated by task 93: __hci_conn_add+0x16f/0x1b40 hci_bind_bis+0x782/0x17b0 hci_connect_bis+0xa0/0x510 iso_sock_connect+0x589/0x1050 Freed by task 88: kfree+0x131/0x3c0 device_release+0xc8/0x240 kobject_put+0x14d/0x280 hci_conn_del+0x55a/0xe80 hci_disconne

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize fragmented ISO packet queueing The fragmented path in hci_qCVE-2026-98733 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize fragmented ISO packet queueing The fragmented path in hci_queue_iso() calls __skb_queue_tail() without holding conn->data_q.lock. The socket lock serializes senders, but the transmit worker can concurrently remove packets from this queue using skb_dequeue(). After an insertion saves the old tail pointer, hci_sched_iso() can dequeue that packet and pass it to the driver. The driver can free the packet before the insertion resumes and writes to the old tail's next pointer, causing a use-after-free. Concurrent updates can also corrupt the queue. KASAN reported: BUG: KASAN: slab-use-after-free in hci_send_iso+0xc7d/0xe10 Call Trace: hci_send_iso+0xc7d/0xe10 iso_sock_sendmsg+0x710/0x900 __sys_sendto+0x34a/0x3a0 Allocated by task 86: __alloc_skb+0xdd/0x820 alloc_skb_with_frags+0x7e/0x770 sock_alloc_send_pskb+0x67a/0x820 bt_skb_sendmsg.constprop.0+0xc0/0x6c0 iso_sock_sendmsg+0x44e/0x900 Freed by task 90: kmem_cache_free+0xcb/0x3d0 vhci_read+0x33f/0x4d0 vfs_read+0x177/0xa20 Hold the queue lock across the entire fragment batch, as hci_queue_acl(

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: fix buffer over-read in btintel_hw_error() The "Exception info %s" priCVE-2026-98732 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: fix buffer over-read in btintel_hw_error() The "Exception info %s" print uses skb->data + 1, but the 12-byte payload is not guaranteed to be NUL-terminated and can be read past its end. Bound the print with "%.*s" and skb->len - 1.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix plen overflow in btintel_pcie_recv_frame() plen is u16 and coCVE-2026-98731 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix plen overflow in btintel_pcie_recv_frame() plen is u16 and computed as HDR_SIZE + dlen. For ACL/ISO frames dlen is a 16-bit field, so a value >= 0xFFFC wraps the sum, bypassing the "skb->len < plen" check and letting skb_trim() truncate the packet. Widen plen to u32 so the addition cannot wrap.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: reject oversized TX packets in send_frame() btintel_pcie_send_fraCVE-2026-98730 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: reject oversized TX packets in send_frame() btintel_pcie_send_frame() eventually copies skb->data into a fixed BTINTEL_PCIE_BUFFER_SIZE (4096) DMA buffer via memcpy() in btintel_pcie_prepare_tx(), with a 4-byte PCIe type header prepended. A user-space process with HCI_CHANNEL_USER access can inject an oversized packet and overflow the buffer. Reject packets larger than BTINTEL_PCIE_BUFFER_SIZE - BTINTEL_PCIE_HCI_TYPE_LEN on entry.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix skb leak in nxp_process_fw_dump() When CONFIG_DEV_COREDUMP=n, hcCVE-2026-98633 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Fix skb leak in nxp_process_fw_dump() When CONFIG_DEV_COREDUMP=n, hci_devcd_append() returns -EOPNOTSUPP without freeing its skb argument. This leaks the cloned skb and also prevents nxp_set_ind_reset() from being called to perform recovery. Fix by guarding the hci_devcd_append(hdev, skb_clone(skb, GFP_ATOMIC)) call with IS_ENABLED(CONFIG_DEV_COREDUMP).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: Dequeue pending mesh_send_sync entries on cancel In send_cancel(), pendinCVE-2026-98632 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: Dequeue pending mesh_send_sync entries on cancel In send_cancel(), pending mesh_tx objects are removed from the hdev->mesh_pending list and freed via mesh_send_complete(). However, if a mesh transmission was already queued onto hdev->cmd_sync_work_list via mesh_next(), the queued entry retains a raw pointer to mesh_tx. When hci_cmd_sync_work later processes the entry, it attempts to execute mesh_send_sync and its destroy callback mesh_send_start_complete using the already freed mesh_tx pointer, leading to a use-after-free. Fix this by invoking hci_cmd_sync_dequeue() for mesh_send_sync on the target mesh_tx before completing it. If the entry is found and dequeued, its destroy callback will complete and free the object; otherwise, mesh_send_complete() is called directly. Additionally, ensure the transmission queue advances after cancellation or errors. In mesh_send_start_complete(), call mesh_next() on error unless err is -ECANCELED, because hci_cmd_sync_dequeue() holds hdev->cmd_sync_work_lock and calling mesh_next() synchronously would deadlock. Instead, advance the queue in send_cancel()

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: fix out-of-bounds reads on short RX/TX frames and control fallthrough FixCVE-2026-98602 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: fix out-of-bounds reads on short RX/TX frames and control fallthrough Fix multiple out-of-bounds reads in Bluetooth BNEP frame processing: 1. In bnep_rx_frame() and bnep_ctrl_frame() (net/bluetooth/bnep/core.c), use pskb_may_pull() to verify the BNEP header, control type byte, filter count, and extension headers exist before reading them, and return 0 after handling BNEP_CONTROL instead of falling through to Ethernet frame submission when no extension headers follow. 2. In bnep_net_xmit() (net/bluetooth/bnep/netdev.c), verify skb->len >= ETH_HLEN with pskb_may_pull() before reading the 14-byte Ethernet header to prevent an out-of-bounds heap read and infoleak on short AF_PACKET TX frames.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate device-supplied DMA indices In btintel_pcie_msix_rx_handCVE-2026-98601 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate device-supplied DMA indices In btintel_pcie_msix_rx_handle(), the driver processes RX completion descriptors (urbd1) written by the PCIe device into DMA-coherent memory. urbd1->frbd_tag (a 16-bit field fully controlled by the device firmware via DMA) is used directly as an array index into rxq->bufs[] without any bounds check. rxq->bufs[] has only BTINTEL_PCIE_RX_DESCS_COUNT (64) entries, while frbd_tag can be any value 0-65535. A malicious or malfunctioning device can write an out-of-range frbd_tag, causing the driver to dereference an out-of-bounds data_buf pointer. Additionally, cr_hia is read from a DMA-shared index array also writable by the device; if the device sets cr_hia >= rxq->count, the while-loop never terminates because cr_tia is wrapped via modulo rxq->count and can never equal an out-of-range cr_hia. Add bounds validation for cr_hia and frbd_tag in the RX path, and cr_hia in the TX path. Log invalid values with bt_dev_err before returning.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Reject short EA=0 frames in rfcomm_recv_frame() While rfcomm_recv_frameCVE-2026-98600 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Reject short EA=0 frames in rfcomm_recv_frame() While rfcomm_recv_frame() verifies that skb->len is at least sizeof(*hdr) + 1 (4 bytes: 3-byte header + 1-byte FCS), an RFCOMM frame with an extended 2-byte length field (!__test_ea(hdr->len)) has a 4-byte header plus a 1-byte FCS (5 bytes minimum, sizeof(*hdr) + 2). When a 4-byte RFCOMM frame with EA == 0 arrives: 1. The initial skb->len < sizeof(*hdr) + 1 check passes (4 < 4 is false). 2. Trimming the FCS byte decrements skb->len to 3. 3. If __check_fcs() succeeds, skb_pull(skb, 4) fails (4 > 3) and returns NULL without advancing skb->data. 4. Because the return value of skb_pull() is ignored, the un-pulled 3-byte struct rfcomm_hdr remains at skb->data and is either queued as application payload via rfcomm_recv_data() or parsed as a multiplexer control command via rfcomm_recv_mcc() on DLCI 0. Fix this by extending the length check in rfcomm_recv_frame() to also require skb->len >= sizeof(*hdr) + 2 when !__test_ea(hdr->len).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix CIS hold ownership on reuse Commit 69997d50ec57 ("Bluetooth: ISO:CVE-2026-98462 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix CIS hold ownership on reuse Commit 69997d50ec57 ("Bluetooth: ISO: handle bound CIS cleanup via hci_conn") made hci_bind_cis() and hci_connect_cis() return a connection with one hold for the ISO layer. hci_bind_cis() currently takes that hold only after configuring a CIS, so its BT_CONNECTED and matching BT_BOUND paths return a bare lookup result. Its configuration failure path can likewise call hci_conn_drop() before taking a hold. Take the hold before any state-dependent return or configuration error so every successful return follows the documented ownership contract and every error drop is balanced. hci_connect_cis() also assumes hci_conn_link() always takes a new CIS hold before dropping the one returned by hci_bind_cis(). However, the helper returns an existing link without taking another hold. In that case, preserve the CIS hold for the caller and drop the redundant LE hold because the existing link already owns its parent hold. Returning early also avoids changing an existing CIS back to BT_CONNECT.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: validate event length before filtering is_filtered_packet() reads theCVE-2026-98461 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: validate event length before filtering is_filtered_packet() reads the event code from skb->data[0] without first checking that the skb is nonempty. When an opcode filter is configured, it also reads the command opcode at offsets 3 or 4 without checking that a Command Complete or Command Status event is long enough. hci_send_to_sock() invokes the filter before hci_event_packet() validates the event header. A malformed event supplied by a controller or a vhci device can therefore cause an out-of-bounds read. Keep the unmasked event code for the opcode checks. The masked value is needed for the 64-bit event bitmap, but using it to identify command events aliases event codes above 0x3f. In particular, Synchronous Train Complete (0x4f) was treated as Command Status (0x0f) even though its payload has no opcode. Reject actual command events that are too short for the field being inspected. A truncated command event cannot match a configured opcode.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: reject out-of-range OCF values The raw HCI socket security filter hasCVE-2026-98460 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: reject out-of-range OCF values The raw HCI socket security filter has 128 OCF bits per supported OGF, but masks the 10-bit OCF with 127 before looking up the command. An unprivileged socket can therefore submit a reserved OCF that aliases an allowlisted command modulo 128. A conforming controller should reject reserved opcodes. Nevertheless, the security decision must apply to the opcode that will actually be sent, especially since controller-specific behavior is outside the host stack's control. Reject OCF values that cannot be represented by the security filter instead of aliasing them onto an unrelated command.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: balance the parent hold in hci_bind_bis() hci_conn_link() takes a lifetimeCVE-2026-98459 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: balance the parent hold in hci_bind_bis() hci_conn_link() takes a lifetime reference to its parent with hci_conn_get(), but only takes an operational hold on the child. hci_conn_unlink() later balances both a hold and a reference on the parent. The SCO and CIS paths pass a parent acquired from a connect helper, so it already has a hold. For an additional BIS, hci_bind_bis() obtains the parent from hci_conn_hash_lookup_big(), which returns a bare pointer. Unlinking the child then drops the parent's existing hold and can schedule it for disconnection while its socket is still using it. Take a hold on the parent before linking it and drop that hold if linking fails. A successful link transfers the hold to hci_conn_unlink().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: release unused CIS holds after channel attach hci_bind_cis() and hci_conneCVE-2026-98458 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: release unused CIS holds after channel attach hci_bind_cis() and hci_connect_cis() return one hci_conn hold for the ISO layer. A new channel association consumes that hold, which is eventually released by iso_conn_free(). There are two cases where iso_chan_add() does not create an association: it returns success when the socket is already attached to the same iso_conn, and it returns -EBUSY when another socket is attached. The hold returned for the current call is unused in both cases. This occurs when deferred setup calls iso_connect_cis() again for its existing socket, or when another socket attempts to reuse the CIS. Detect the idempotent case while the connection is locked and release the unused hold after iso_chan_add(). Also release it on -EBUSY. Do not drop it for other errors: a newly allocated iso_conn releases the transferred hold when its last temporary reference is put.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate frame length before control and FCS access l2cap_data_rcv() unpCVE-2026-98457 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate frame length before control and FCS access l2cap_data_rcv() unpacks either a two-byte or four-byte control field without first ensuring that it is present. A short ERTM or streaming-mode frame can therefore cause an out-of-bounds read. There is a second short-frame case when CRC16 is enabled. After the control field is pulled, l2cap_check_fcs() subtracts two from skb->len without checking it. If fewer than two bytes remain, the subtraction wraps; skb_trim() leaves the buffer unchanged and the subsequent FCS load reads past the logical end of the frame. Validate that the frame contains both its control field and, when enabled, its FCS before either field is accessed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix race in read_unconf_index_list() read_unconf_index_list() counts uncoCVE-2026-98456 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix race in read_unconf_index_list() read_unconf_index_list() counts unconfigured controllers before allocating its response, then checks the device flags again while filling it. hci_dev_list_lock stabilizes list membership, but it does not serialize the per-device flags. During asynchronous controller setup, the worker can set HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller omitted from the allocation count can then become eligible for the fill pass, causing an out-of-bounds write to rp->index[]. Allocate space for every device on hci_dev_list. Since list membership cannot change while hci_dev_list_lock is held, the response remains large enough regardless of flag transitions. The reported count and response length still include only eligible unconfigured controllers.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO The RFCOMM_CONNCVE-2026-98455 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not connected as long as deferred setup is enabled: if (sk->sk_state != BT_CONNECTED && !rfcomm_pi(sk)->dlc->defer_setup) { err = -ENOTCONN; break; } l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind() creates a child socket for an incoming connection on a listening socket that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The session, however, can go away underneath it. rfcomm_recv_disc() forces the dlc state before tearing it down: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); The RFCOMM_DEFER_SETUP early return in __rfcomm_dlc_close() only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2, so with the state already BT_CLOSED that switch does not match and the function falls through to rfcomm_dlc_unlink(), which sets d->session = NULL, while d->defer_setup stays 1. A getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket after that point therefore skips the

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.