Updated 12 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,762exploited flaws on CISA’s list

34added in the last 30 days

343new WordPress flaws this week

390,080entries in the database

28,047 results · page 8 of 561

Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/gsp: add SEC2 to GA100 chip table The booter-load and booter-unload firmware rCVE-2026-98875 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/gsp: add SEC2 to GA100 chip table The booter-load and booter-unload firmware run on the SEC2 falcon. During tu102_gsp_oneinit(), the booter constructor needs device->sec2 to access the SEC2 falcon. Without the .sec2 entry, device->sec2 is NULL and this dereference crashes during GSP-RM boot.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect Clearly, from a user perspeCVE-2026-98874 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect Clearly, from a user perspective, it must be valid to configure WoWLAN and then suspend while not connected to a network. Since mac80211 doesn't distinguish these cases and simply calls the driver to suspend whenever WoWLAN is configured, the driver has to cleanly handle the case where it's called for WoWLAN, it's not connected but there's also no netdetect configured. Remove the WARN_ON() and keep returning 1 to disconnect and then suspend.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: zero at allocation time There are occasional LLM hints wrtCVE-2026-98873 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: zero at allocation time There are occasional LLM hints wrt. leaking uninitialized data to userspace via ctnetlink. Just zero at allocation time, expectations are not frequently used these days. Intentionally keeps _init as-is because we could theoretically support re-init, so add the missing exp->dir there.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: freevxfs: don't BUG() on unknown typed-extent type vxfs_bmap_typed() handles four typed-exCVE-2026-98872 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: freevxfs: don't BUG() on unknown typed-extent type vxfs_bmap_typed() handles four typed-extent types and calls BUG() in its default case, so an on-disk typed extent with any other type value crashes the kernel. It is reachable from ioctl(FIBMAP) on a regular file: kernel BUG at fs/freevxfs/vxfs_bmap.c:230! RIP: vxfs_bmap_typed fs/freevxfs/vxfs_bmap.c:230 [inline] vxfs_bmap1+0x128a/0x12d0 fs/freevxfs/vxfs_bmap.c:257 Replace the BUG() with WARN_ON_ONCE() and return 0 -- the value vxfs_bmap_typed() already returns on failure (and from the DEV4 case above); vxfs_getblk() maps 0 to -EIO, so the ioctl fails cleanly.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix possible deadlock in SEV init failure path __sev_platform_init_handle_inCVE-2026-98871 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix possible deadlock in SEV init failure path __sev_platform_init_handle_init_ex_path() calls rmp_mark_pages_firmware() with locked=false while the parent function of init_ex_path already acquired the sev_cmd_mutex. In the case of an RMPUPDATE failure for any page after the first, the cleanup path would invoke reclaim pages which would result in a deadlock in sev_do_cmd. Pass locked=true to honor the lock status of the parent function.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: remove stale channels from all sessions on teardown ksmbd_sessions_deregister() remCVE-2026-98870 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: ksmbd: remove stale channels from all sessions on teardown ksmbd_sessions_deregister() removes a connection's channels from other sessions' channel lists only while conn->binding is still set: if (conn->binding) { hash_for_each_safe(sessions_table, ...) ksmbd_chann_del(conn, sess); } conn->binding is a transient flag: it is cleared once a binding SESSION_SETUP completes, and also by a subsequent non-binding SESSION_SETUP on the same connection (a reauthentication on a bound channel, or a new SessionId==0 setup). A connection that has bound a channel into another session's ksmbd_chann_list and then clears conn->binding leaves that channel behind when it disconnects: the channel, whose chann->conn points at the now freed struct ksmbd_conn, stays on the owner session's list. When the owning connection later tears down, the second loop dereferences the stale channel: xa_for_each(&sess->ksmbd_chann_list, chann_id, chann) if (chann->conn != conn) ksmbd_conn_set_exiting(chann->conn); /* freed */ which is a use-after-free write into the freed ksmbd_conn (the same stale channel is also walked by show_p
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 22, 2026A flaw was found in the iscsiuio component of open-iscsi.CVE-2026-115486 · Other software · Red Hat · reported by Red HatHigh 7.1
A flaw was found in the iscsiuio component of open-iscsi. The IPv6 Neighbor Discovery handler accesses link-layer address options at a fixed offset without verifying the packet contains them. Additionally, the ARP table is updated unconditionally with attacker-controlled addresses from the packet headers. An attacker on the same network segment can send a minimal Neighbor Advertisement to poison the ARP table and redirect network traffic.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 22, 2026A flaw was found in the iscsiuio component of open-iscsi.CVE-2026-115485 · Other software · Red Hat · reported by Red HatMedium 6.3
A flaw was found in the iscsiuio component of open-iscsi. The DHCPv6 option parser calls strlen() on raw network data without ensuring a NUL terminator is present, causing it to read past the buffer into heap memory. This can result in a daemon crash, a 1-byte heap overwrite, or corruption of the iSCSI initiator name. An attacker on the same network segment can trigger this by sending a crafted DHCPv6 Advertise message.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 22, 2026A flaw was found in the iscsiuio component of open-iscsi.CVE-2026-115484 · Other software · Red Hat · reported by Red HatHigh 7.6
A flaw was found in the iscsiuio component of open-iscsi. The DHCPv4 option parser incorrectly calculates the length of the options data, causing it to read beyond the allocated buffer into adjacent heap memory. An attacker on the same network segment can send a crafted DHCP response to crash the daemon or corrupt its network configuration.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 22, 2026A flaw was found in libslirp.CVE-2026-115449 · Other software · Red Hat · reported by Red HatLow 3.5
A flaw was found in libslirp. When handling ICMP echo requests, the reply length is not updated to match the actual data received from the host. Under specific conditions where the normal ICMP socket is unavailable, this length mismatch causes the host's real IP address to be leaked to the guest in the echo reply, breaking the NAT isolation that user-mode networking is expected to provide.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 22, 2026A flaw was found in FreeIPA.CVE-2026-115221 · Other software · Red Hat · reported by Red HatMedium 5.4
A flaw was found in FreeIPA. An improper authorization check allows an authenticated host to retrieve and revoke digital certificates assigned to other users or services. This issue occurs because FreeIPA verifies ownership solely by matching the host name to the certificate's subject Common Name (CN), without confirming actual ownership in the directory service. Consequently, an enrolled host can disrupt services by revoking certificates belonging to other entities.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 22, 2026Incomplete validation of extracted archive entry paths in ast-cli's tar extraction logic on Linux and macOS (used when installing the Vorpal ASCA real-time engiCVE-2026-77156 · Other software · Checkmarx · reported by 596c5446-0ce5-4ba2-aa66-48b3b757a647Medium 6.3
Incomplete validation of extracted archive entry paths in ast-cli's tar extraction logic on Linux and macOS (used when installing the Vorpal ASCA real-time engine and the SCA Resolver) would allow a malicious tar archive containing absolute or traversal path entries to write files outside the install directory. Windows builds were not affected, as the Windows extractor performs this path validation. Exploitation required substituting the archive served at "download.checkmarx.com". An attacker able to compromise that server and replace the archive could write arbitrary, executable files to arbitrary filesystem paths via this path traversal. Extraction now validates that each entry's destination path resolves within the working directory and rejects absolute paths.
Product
github.com/checkmarx/ast-cli
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Oct 22, 2026A flaw was found in GNU patch.CVE-2026-115207 · Other software · Red Hat · reported by Red HatMedium 5.5
A flaw was found in GNU patch. An attacker can achieve arbitrary file creation outside the intended working directory by enticing a user or automated workflow to apply a specially crafted patch file. Due to missing validation during automatic patch reversal, absolute file paths in patch headers are accepted rather than rejected. Consequently, the utility can create files in arbitrary locations with the permissions of the executing user.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 22, 2026A flaw was found in Goose.CVE-2026-111079 · Other software · Red Hat · reported by Red HatHigh 7.4
A flaw was found in Goose. When the terminal integration feature is enabled, the application captures shell command history and sends it verbatim without sanitization to configured Large Language Model (LLM) provider endpoints during queries. If a user enters sensitive data—such as API tokens, passwords, or environment variables containing secrets—in the terminal, this unredacted information is transmitted across trust boundaries. This can lead to sensitive information disclosure, exposing confidential credentials to external service providers and logs.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 21, 2026The system certificate authority (CA) store in Red Hat products, distributed via ca-certificates RPM packages, included multiple root CA certificates of authoriCVE-2026-114406 · Other software · Red Hat · reported by Red HatMedium 6.8
The system certificate authority (CA) store in Red Hat products, distributed via ca-certificates RPM packages, included multiple root CA certificates of authorities, which signed intermediate CA certificates with weak private keys issued by the eMudhra certificate authority. A man-in-the-middle attacker could use this flaw to issue certificates for arbitrary host names signed by the weak intermediate CA certificates, which would be considered trusted by a TLS/SSL client using system CA store and cause such clients to connect to malicious sites. Due to inability to only distrust specific intermediate certificates in all clients using the system CA store, root CA certificates of authorities that signed weak intermediate CA certificates are being removed.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com access.redhat.com
Oct 21, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Infer zext_dst based on static register liveness analysis As reported in the thread [CVE-2026-98869 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: bpf: Infer zext_dst based on static register liveness analysis As reported in the thread [1], the verifier's 32-bit operations zero extension logic is broken. This logic is responsible for correct semantics of 32-bit operations on s390 architecture. According to BPF semantics, operation `w1 += 1` is supposed to zero extend the upper half of the register `r1`. On s390 the JIT relies on the verifier emitting explicit zero extension before such operations. The verifier attempts to minimize the amount of zero extensions inserted by tracking whether upper halves of the 64-bit registers are ever used. Previously such tracking worked as follows: - bpf_reg_state->subreg_def field was set by do_check_insn() for each operation defining lower but not the upper halves of the register. - Whenever an operation reading the whole register was verified, the verifier checked register's subreg_def and set bpf_insn_aux_data->zext_dst flag as true via a call to mark_insn_zext() function. - After the verification was complete, a special pass bpf_opt_subreg_zext_lo32_rnd_hi32() extended 32-bit operations with bpf_insn_
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org
Oct 21, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content ofCVE-2023-7356 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Copy BASE if service data matches EIR_BAA_SERVICE_UUID Copy the content of a Periodic Advertisement Report to BASE only if the service UUID is Basic Audio Announcement Service UUID.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 21, 2026A flaw was found in libmodulemd.CVE-2026-92824 · Other software · Red Hat · reported by Red HatMedium 6.2
A flaw was found in libmodulemd. In the module stream v2 rpm-map emission path, an inner loop incorrectly uses the count of digest algorithms as its bound instead of the number of checksums in the current digest table. Crafted modulemd v2 metadata with multiple digest types can trigger an out-of-bounds read during YAML serialization, typically causing a crash and resulting in a denial of service.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 21, 2026A flaw was found in libmodulemd.CVE-2026-92823 · Other software · Red Hat · reported by Red HatMedium 6.2
A flaw was found in libmodulemd. In builds with rpmio support enabled, compressed modulemd YAML is decompressed through a custom read handler that does not enforce a cumulative decompressed-size limit before parsing. An attacker who can supply a highly compressible compressed YAML file can cause excessive CPU and memory consumption, resulting in a denial of service.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 21, 2026A flaw was found in libmodulemd.CVE-2026-92822 · Other software · Red Hat · reported by Red HatMedium 6.2
A flaw was found in libmodulemd. When parsing module metadata, the xmd field is converted into nested GVariant values through recursive YAML mapping and sequence helpers without a recursion-depth or node-count limit. An attacker who can supply crafted modulemd YAML with deeply nested xmd content can cause stack exhaustion or excessive resource consumption, resulting in a denial of service.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 20, 2026Sharp before 0.35.4 bundles a vulnerable libheif dependency that allows attackers to achieve possible remote code execution on glibc-based Linux by supplying crCVE-2026-114112 · Other software · lovell · reported by VulnCheckHigh 8.9
Sharp before 0.35.4 bundles a vulnerable libheif dependency that allows attackers to achieve possible remote code execution on glibc-based Linux by supplying crafted images. Attackers can submit malicious AVIF/HEIF input to applications processing untrusted images with sharp, triggering libheif decoding flaws to execute code.
Product
sharp
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com vulncheck.com
Oct 20, 2026A flaw was found in device-mapper-multipath.CVE-2026-114038 · Other software · Red Hat · reported by Red HatMedium 5.1
A flaw was found in device-mapper-multipath. A local user can trigger an out-of-bounds read by sending a command with a format string ending in a trailing percent character to the multipath daemon. This issue can allow the user to expose unintended daemon memory, leading to information disclosure, or cause the daemon to crash, resulting in a Denial of Service (DoS).
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 20, 2026Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux.CVE-2026-92162 · Other software · flatpak · reported by GitHubHigh 7.2
Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. Prior to version 1.18.1, on systems where at least one OCI remote is configured (most common on Fedora systems), a malicious local user in an active local session could use a crafted architecture name to trick the `flatpak-system-helper` process into creating a root-owned directory tree with contents determined by the OCI remote, plus a root-owned `lock` file and `icons` directory, outside the intended root directory. If this vulnerability is combined with other vulnerabilities also fixed in 1.18.1, the combination can lead to local root privilege escalation. This particular vulnerability is not believed to be exploitable if there are no OCI remotes configured (common on non-Fedora systems). Version 1.18.1 patches the issue.
Product
flatpak
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Oct 20, 2026A flaw was found in cockpit-machines.CVE-2026-113496 · Other software · Red Hat · reported by Red HatMedium 5
A flaw was found in cockpit-machines. When saving Virtual Network Computing (VNC) console settings, the configured password is passed directly as a command-line argument to an underlying system utility. A local unprivileged attacker on a host that allows cross-user process inspection could read the exposed password from the process list while another user modifies settings. This credential disclosure can allow unauthorized access to the guest virtual machine's graphical console.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 20, 2026A flaw was found in cockpit-machines.CVE-2026-113495 · Other software · Red Hat · reported by Red HatMedium 5
A flaw was found in cockpit-machines. Red Hat Subscription Management (RHSM) authentication tokens are passed as command-line arguments to background helper processes during image retrieval operations. A local, unprivileged attacker on a system permitting cross-user process inspection can view these arguments while the process is active. This flaw can lead to information disclosure, potentially allowing unauthorized access to RHSM resources within the token's validity period.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 20, 2026A flaw was found in Ghostscript as shipped with Red Hat Enterprise Linux 8.CVE-2026-112177 · Other software · Red Hat · reported by Red HatHigh 7.3
A flaw was found in Ghostscript as shipped with Red Hat Enterprise Linux 8. The correction for CVE-2019-14869 was omitted during the rebase from version 9.25 to 9.27, leaving privileged .forceput operations in the .charkeys procedure insufficiently protected. Processing a specially crafted PostScript file may allow an attacker to bypass -dSAFER restrictions and access files outside the permitted paths or execute commands with the permissions of the Ghostscript process.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 19, 2026A flaw was found in GIMP.CVE-2026-112261 · Other software · Red Hat · reported by Red HatHigh 7.8
A flaw was found in GIMP. Opening a crafted XCF that selects a path and then fails to load that path can cause a use-after-free in the main process, leading to a crash and potentially arbitrary code execution.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 19, 2026A flaw was found in GIMP.CVE-2026-112258 · Other software · Red Hat · reported by Red HatHigh 7.8
A flaw was found in GIMP. The XCF loader can leave a dangling pointer in the linked-channels list when a linked channel is later destroyed via a selection property. Opening a crafted XCF file can cause a use-after-free in the main GIMP process, leading to a crash and potentially arbitrary code execution.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 19, 2026A flaw was found in GIMP.CVE-2026-112257 · Other software · Red Hat · reported by Red HatHigh 7.8
A flaw was found in GIMP. The PSD thumbnail resource loader performs a BGR-to-RGB channel swap with a fixed 3-byte stride and does not verify that the JPEG thumbnail is RGB. A crafted grayscale PSD thumbnail can cause a heap out-of-bounds read and write in the plug-in process, leading to a crash and potentially arbitrary code execution when the victim browses or opens the file.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 19, 2026A flaw was found in GIMP.CVE-2026-112260 · Other software · Red Hat · reported by Red HatHigh 7.1
A flaw was found in GIMP. Opening a crafted XCF with a malformed text-layer parasite can cause a heap out-of-bounds read, disclosing adjacent heap data into layer text and causing denial of service.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 19, 2026A flaw was found in GIMP.CVE-2026-112259 · Other software · Red Hat · reported by Red HatMedium 5.5
A flaw was found in GIMP. Importing a crafted SBZ palette without a color-model attribute can cause a NULL pointer dereference during string comparison, resulting in denial of service of the GIMP application.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 19, 2026A flaw was found in the GStreamer ASF demuxer in gst-plugins-ugly.CVE-2026-112214 · Other software · Red Hat · reported by Red HatMedium 6.5
A flaw was found in the GStreamer ASF demuxer in gst-plugins-ugly. When parsing a Simple Index object, an attacker-controlled entry count is used to size a heap allocation without being limited to the payload available in the object. Processing a crafted ASF, WMV, or WMA file can cause a very large memory allocation request and lead to denial of service if the allocation fails or the process is memory-constrained.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 19, 2026A flaw was found in the rhc-canonical-facts.service systemd unit shipped with rhc.CVE-2026-112210 · Other software · Red Hat · reported by Red HatMedium 6
A flaw was found in the rhc-canonical-facts.service systemd unit shipped with rhc. The service runs as root and operates on a file inside a directory owned by an unprivileged system user without verifying that the file is not a symbolic link. A local attacker who has already compromised the privileged yggdrasil system service account can exploit this to gain ownership of arbitrary files, leading to privilege escalation to root.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 19, 2026A flaw was found in bootc and ostree.CVE-2026-16460 · Other software · Red Hat · reported by Red HatHigh 7.4
A flaw was found in bootc and ostree. Already-staged deployments are finalized without revalidating the deployment's container image against the current containers signature policy. Unsigned OS content staged under a prior permissive policy can remain bootable after policy is hardened to reject unsigned images, leading to full host compromise on reboot.
Product
Red Hat Enterprise Linux 10
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record access.redhat.com bugzilla.redhat.com
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: dm-pcache: reject a kset that overruns its segment cache_replay(), the writeback worker anCVE-2026-98868 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: dm-pcache: reject a kset that overruns its segment cache_replay(), the writeback worker and the GC worker read a kset of get_kset_onmedia_size() bytes and advance the position by it. A forged key_num makes that size exceed the segment's remaining space, so the advance walks past the segment and trips the cache_pos_advance() BUG_ON. Reject a kset whose on-media size exceeds cache_seg_remain() before use.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: dm-pcache: bound the logical key offset from persistent memory cache_key_decode() takes a CVE-2026-98867 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: dm-pcache: bound the logical key offset from persistent memory cache_key_decode() takes a key's logical off from the cache device and later indexes req_key_tree->subtrees[] by it in get_subtree(). An off past the device forms a subtree pointer outside the array, which rb_insert() writes through during replay. Reject a key of zero length, or whose off+len (computed in 64 bits) exceeds the device size, before it is used.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: sched/cache: Introduce task_struct->sched_cache_grp to fix UAF Add a sched_cache_grp pointCVE-2026-98866 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: sched/cache: Introduce task_struct->sched_cache_grp to fix UAF Add a sched_cache_grp pointer to task_struct so that scheduler code can access the cache group directly via the task, without going through mm->sched_cache_grp. This decouples the scheduler's hot-path accesses from the mm_struct. Each task holds its own refcount on the sched_cache_group, separate from the reference held by its mm_struct. The reference is acquired in copy_mm() (fork) and exec_mmap() (exec), and released in exit_mm(). This fixes the use-after-free when account_mm_sched() reaches the group through a task whose mm is being switched, as reported by Hyunwoo: https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/ Convert all scheduler code in fair.c and exit.c to use p->sched_cache_grp instead of p->mm->sched_cache_grp. Keep the fork/exec/exit reference management out of the generic mm paths: add sched_cache_fork(), sched_cache_fork_cleanup(), sched_cache_exec_mmap() and sched_cache_exit_mm() in kernel/sched/cache_sched.c (with empty stubs for !CONFIG_SCHED_CACHE), so fs/exec.c, kernel/fork.c and kernel/exit.c each call one helper inst
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't run ops.dequeue() with a DSQ lock held ops.dequeue() is invoked with the CVE-2026-98865 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't run ops.dequeue() with a DSQ lock held ops.dequeue() is invoked with the source user DSQ's lock still held on the consume and move paths (scx_consume_dispatch_q(), move_task_between_dsqs()). A BPF scheduler which locks the source user DSQ from ops.dequeue() - e.g. by iterating it with bpf_iter_scx_dsq - self-deadlocks. ops.dequeue() can only call the "any" kfuncs and none of them can lock a builtin DSQ, so the global and bypass paths can't deadlock; however, all DSQ locks share one lockdep class, so iterating any user DSQ from ops.dequeue() on those paths trips the recursion check. Move the invocation after the DSQ unlock on all three paths. SCX_TASK_IN_CUSTODY is cleared under the lock serializing the transfer so that the callback is invoked exactly once.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: sched_ext: Wait for SCX_OPSS_DISPATCHING before reenqueueing a task ebf1ccff79c4 ("sched_eCVE-2026-98864 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Wait for SCX_OPSS_DISPATCHING before reenqueueing a task ebf1ccff79c4 ("sched_ext: Fix ops.dequeue() semantics") moved the final ops_state store in scx_dispatch_enqueue() after the DSQ unlock so that the custody update and ops.dequeue() precede it. A task can thus be found on a DSQ while still SCX_OPSS_DISPATCHING. The dequeue and core-sched pick paths wait for the state to clear in ops_dequeue() but the reenqueue paths don't. A reenqueue in that window runs ops.enqueue() and sets SCX_OPSS_QUEUED before the dispatch has completed. The dispatcher's final store then overwrites it with SCX_OPSS_NONE and finish_dispatch() drops every later dispatch of the task. Wait for SCX_OPSS_DISPATCHING to clear before dequeueing a task for reenqueue, the same way ops_dequeue() does.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails Re-pend GET_NESTED_STCVE-2026-98863 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails Re-pend GET_NESTED_STATE_PAGES before exiting to userspace if getting the nested pages fails in the KVM_RUN path. If userspace re-runs the vCPU, and vmcs02 holds valid PFNs from the *previous* run of L2, then KVM could re-enter L2 with stale, unpinned PFNs mapped into e.g. the vAPIC page. Note, both SVM and VMX (as of commit 11722439fb20 ("KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit") ensure the request is cleared on VM-Exit (including the "forced" case), i.e. there is no risk of double-mapping due to emulated VMLAUNCH/VMRESUME/VMRUN *and* the request trying to map the nested pages.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: audit: fix exe mark UAF in kill_rules() kill_rules() removes mixed AUDIT_DIR and AUDIT_EXECVE-2026-98862 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: audit: fix exe mark UAF in kill_rules() kill_rules() removes mixed AUDIT_DIR and AUDIT_EXE rules when an audit tree is pruned. It drops entry->rule.exe before removing the rule from the RCU-visible filter lists. After a rule has been installed with AUDIT_ADD_RULE, which requires CAP_AUDIT_CONTROL, removing the watched directory can race with another task that is still evaluating the rule. In that case, fsnotify can free the executable mark before the reader reaches audit_mark_compare(), causing a use-after-free. KASAN reports: BUG: KASAN: slab-use-after-free in audit_mark_compare+0x8d/0xa0 Unlink the published rules from the RCU-visible lists and retain them on tree->rules for cleanup. If any rule has an executable mark, wait for a single RCU grace period before removing the marks and scheduling the entries for freeing. Otherwise, call_rcu() already provides the required deferred freeing without a synchronous wait.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: fprobe: Use guard(rcu_sched_notrace) and check rcu_is_watching() unregister_fprobe() and uCVE-2026-98861 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: fprobe: Use guard(rcu_sched_notrace) and check rcu_is_watching() unregister_fprobe() and unregister_fprobe_async() (used by BPF kprobe-multi) rely on standard RCU grace periods (synchronize_rcu() and call_rcu()) to wait until in-flight fprobe handlers complete before freeing the fprobe. However, if an fprobe handler executes while RCU is not watching (such as in the idle loop or nohz_full extended quiescent states), standard RCU does not track preemption-disabled sections. Consequently, synchronize_rcu() does not wait for those executions, which can lead to a use-after-free if the fprobe is freed immediately after unregistration. Ensure handlers exit early when !rcu_is_watching(). Furthermore, fprobe_fgraph_entry() and fprobe_ftrace_entry() previously used guard(rcu)() and rcu_read_lock(), which invoke lockdep on every hit under CONFIG_PROVE_LOCKING. This adds overhead and can cause lockdep recursion if probed functions interact with lockdep. Since rhltable_lookup() and rhl_for_each_entry_rcu() use rcu_dereference_all_check() (which checks rcu_read_lock_any_held()), holding preemption disabled via rcu_read_loc
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: HID: bpf: cast size to ssize_t when checking hid_bpf_hw_request As reported by Sashiko: IfCVE-2026-98860 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: HID: bpf: cast size to ssize_t when checking hid_bpf_hw_request As reported by Sashiko: If a transport driver encounters a hardware error and returns a negative error code such as -EPIPE, ret is implicitly promoted to size_t when compared against size. This causes the negative error code to evaluate as a large positive number, making the (ret > size) condition true. This silently converts the hardware error into a success return value and copies the unmodified buffer back, which could leave BPF programs operating on uninitialized or stale data. Fix this by casting size into ssize_t to return the actual negative error code.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: stop the release timer from being rearmed on remove mt_remove() quiesces CVE-2026-98859 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: stop the release timer from being rearmed on remove mt_remove() quiesces the sticky-finger timer before stopping the hardware: timer_delete_sync(&td->release_timer); sysfs_remove_group(&hdev->dev.kobj, &mt_attribute_group); hid_hw_stop(hdev); timer_delete_sync() waits for a running callback and dequeues the timer, but it does not stop the timer from being armed again. The transport is still delivering reports at that point, and the report path rearms it: if (app->quirks & MT_QUIRK_STICKY_FINGERS) { if (td->mt_io_flags & MT_IO_SLOTS_MASK) mod_timer(&td->release_timer, jiffies + msecs_to_jiffies(100)); A report that arrives after timer_delete_sync() has returned therefore leaves the timer queued. td is allocated with devm_kzalloc() against hdev->dev, so it is freed when the driver is unbound, after mt_remove() returns. When the timer fires afterwards, mt_expired_timeout() dereferences the freed td: struct mt_device *td = timer_container_of(td, t, release_timer); struct hid_device *hdev = td->hdev; if (test_and_set_bit_lock
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: io_uring: fix task_work add use-after-free with SQPOLL For SQPOLL, the sqpoll thread runs CVE-2026-98858 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: io_uring: fix task_work add use-after-free with SQPOLL For SQPOLL, the sqpoll thread runs task_work off its own list and doesn't need to be told about it, so it can pop and complete a request as soon as mpscq_push() has published it. If that was the last request holding the ring alive, io_ring_exit_work() then frees the ctx, stops the thread, and with it the tctx, while io_req_normal_work_add() is still looking at both after the push: BUG: KASAN: slab-use-after-free in io_req_normal_work_add+0x439/0x510 Read of size 4 at addr ff11000000ca0000 by task repro/55 (...) BUG: KASAN: slab-use-after-free in queue_work_on+0x25/0x70 Write of size 8 at addr ff11000000c3bd00 by task repro/55 Hold an RCU read lock across the add, like io_req_local_work_add() already does, and have io_ring_exit_work() wait for a grace period for SQPOLL rings as well before freeing the ctx.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: ipvs: bound LBLCR and LBLC cache growth ip_vs_lblcr_new() and ip_vs_lblc_new() create cachCVE-2026-98857 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: ipvs: bound LBLCR and LBLC cache growth ip_vs_lblcr_new() and ip_vs_lblc_new() create cache entries for every previously unseen destination address. The table max_size only tells the periodic collector to reclaim entries after the cache has already exceeded the limit. It does not reclaim entries that the attacker continues to use. Reject new cache entries once either table reaches max_size * 3 / 2. The extra headroom lets the periodic collector catch up while the existing scheduler fallback continues to use the selected destination when cache creation fails. New traffic therefore stays serviceable without growing the tables further.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: kprobes: Skip disarmed probes when checking optkprobe overlap On x86, an optkprobe at A reCVE-2026-98856 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: kprobes: Skip disarmed probes when checking optkprobe overlap On x86, an optkprobe at A replaces five bytes with a jump. If a disabled probe B is at A+2, get_optimized_kprobe() stops at B when arming a new probe C at A+4. It leaves A optimized: A A+1 A+2 A+3 A+4 A's jump | e9 | d0 | d1 | d2 | d3 | after C | e9 | d0 | d1 | d2 | cc | The INT3 for C overwrites the last byte of A's jump displacement, so execution can jump to the wrong address. B can have prepared optinsns while disarmed, but has no jump to unoptimize. Continue past disarmed and unprepared probes to find the active optimized probe before arming a probe in its jump.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: of/overlay: put property on deadprops only after changeset add succeeds add_changeset_propCVE-2026-98855 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: of/overlay: put property on deadprops only after changeset add succeeds add_changeset_property() links a new property of a not-yet-live target node into the node's deadprops list before handing it to of_changeset_add_property(). If that fails, the error path frees the property but leaves the freed pointer linked in deadprops, and of_node_release() frees it a second time when the aborted overlay's node is released. Record the changeset entry first and link the property into deadprops only on success. of_changeset_add_property() never looks at the node's property lists, so the order of the two steps is otherwise immaterial, and the error path frees a property that nothing references.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: of/overlay: only treat a positive changeset id as registered of_overlay_fdt_apply() storesCVE-2026-98854 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: of/overlay: only treat a positive changeset id as registered of_overlay_fdt_apply() stores the idr_alloc() return value in ovcs->id before checking it. On failure the stored id is negative, free_overlay_changeset()'s "if (ovcs->id)" check passes, idr_remove() is called with a negative id and list_del() runs on ovcs->ovcs_list, which is not initialized until after the id allocation. An allocation failure at that point dereferences NULL. Make free_overlay_changeset() treat only a strict-positive id as registered. The rest of the function already copes with a partially-initialized ovcs, so the error path stays a plain goto err_free_ovcs.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: net: gso: limit recursive IP-in-IP segmentation IP-in-IP GSO can re-enter inet_gso_segmentCVE-2026-98853 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: gso: limit recursive IP-in-IP segmentation IP-in-IP GSO can re-enter inet_gso_segment() or ipv6_gso_segment() for each nested IP header. encap_level tracks header bytes, not callback depth, so a deep chain can exhaust the kernel stack. Making inet_gso_segment() stackable introduced unbounded IPv4 nesting; IPIP GSO/TSO later made the path reachable. The IPv6 stackable path was introduced separately and uses the same guard. Count IPv4 and IPv6 GSO handler entries in skb_gso_cb, initialized once per top-level GSO operation and preserved across GRE/UDP context changes. Use the existing IP_TUNNEL_RECURSION_LIMIT for both handlers. The first five entries pass, and the sixth returns -EINVAL before dispatching another GSO callback.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Vulnerability database

The flaws that hit local websites, every Friday.

Tell us what you're building.