Vulnerability database

25,335 results · page 75 of 507

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: reject feature changes after endpoint vhost_scsi_setup_vq_cmds() runs from VHOCVE-2026-74702 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: vhost-scsi: reject feature changes after endpoint vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates each command's protection scatterlist array (prot_sgl) according to the acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt when VHOST_SET_FEATURES changes that bit later. Although virtio feature bits must not change after feature negotiation, vhost_scsi_set_features() currently accepts such a request after the endpoint is active and updates acked_features. Enabling T10-PI after endpoint setup therefore leaves prot_sgl NULL while the I/O path follows the new feature bit. For a 129-page protection payload, vhost_scsi_mapal() passes the missing first chunk to sg_alloc_table_chained(): sg_alloc_table_chained(table, 129, first_chunk=NULL, nents_first_chunk=inline_sg_cnt) sg_pool_index() then hits: BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */ The kernel reported the following call trace and register state: Call Trace: <TASK> ? __sg_alloc_table+0x1d8/0x250 ? __pfx_vhost_run_work_list+0x10/0x10 [vhost] sg_alloc_table_chai

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net/openvswitch: check Ethernet header length in key_extract() When a packet arrives on anCVE-2026-74701 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net/openvswitch: check Ethernet header length in key_extract() When a packet arrives on an ARPHRD_NONE device (e.g. TUN), ovs_flow_key_extract() trusts the user-provided skb->protocol field: if it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes for MAC addresses and parse_ethertype() pulls 2 more, either of which triggers a kernel BUG in __skb_pull() when the linear area is too small. kernel BUG at include/linux/skbuff.h:2848! RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933 ovs_flow_key_extract+0x419/0xa70 ovs_vport_receive+0x222/0x390 netdev_frame_hook+0x3e0/0x630 tun_get_user+0x2d0c/0x38e0 Fixed by calling check_header() in key_extract() before accessing the Ethernet header.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers Another chCVE-2026-74700 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers Another challenge with unlocked filters. There is a short window in tc_new_tfilter where a tcf_proto can be found and briefly referenced by a totally unrelated, unlocked classifier's request and cause a race. Feng created a poc which created this race with two threads, one creating a u32 filter and other a flower filter in the same chain/prio: 1. Both threads enter tc_new_tfilter, both find the chain empty, both drop filter_chain_lock 2. u32 finishes tcf_proto_create("u32") first, calls tcf_chain_tp_insert_unique() -> inserts u32_tp into the chain 3. flower finishes tcf_proto_create("flower") later, calls tcf_chain_tp_insert_unique() -> tcf_chain_tp_find() now sees u32_tp already there, takes a reference on it, destroys flower's own tp_new and returns u32_tp to the caller. Flower then hits the kind mismatch check (because it requested for kind "flower" but tp->ops->kind is "u32") and goes through the errout path which calls tcf_proto_put() on u32_tp. If the u32 thread has already gone through its own errout (its chan

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix memory leak in exec_queue_set_hang_replay_state() The q->replay_state is blindCVE-2026-74699 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix memory leak in exec_queue_set_hang_replay_state() The q->replay_state is blindly overwritten, which can potentially leak memory that was previously allocated by vmemdup_user(). Return an error if q->replay_state is not empty. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit f6b6cc1118bdbc4265fa8b3bdf8565b26f13e56e)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix BQL reset on SQ re-activation mlx5e_queue_start() deactivates and re-activaCVE-2026-74698 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: fix BQL reset on SQ re-activation mlx5e_queue_start() deactivates and re-activates all channels but closes only the queue being restarted. mlx5e_activate_txqsq() then unconditionally calls netdev_tx_reset_queue(), zeroing the BQL counters of channels that kept their in-flight TX WQEs. The next completion then over-charges and trips the BUG_ON() in dql_completed(): kernel BUG at lib/dynamic_queue_limits.c:99! RIP: 0010:dql_completed+0x23d/0x280 Call Trace: <IRQ> mlx5e_poll_tx_cq+0x668/0xa60 mlx5e_napi_poll+0x5b/0x7b0 net_rx_action+0x15a/0x580 Reset BQL only when the SQ has no bytes in flight (sq->cc == sq->pc). In the case that reset is skipped, the outstanding WQEs will eventually complete and rebalance the dql. The dql->limit is carried across the reset.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Disable EOP for TPA on all chips to prevent data corruption EOP (End of frame padCVE-2026-74697 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.2

  In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Disable EOP for TPA on all chips to prevent data corruption EOP (End of frame padding) on the AGG ring may cause overlapping of zero padding at the end of one segment with the next segment's data. If Relaxed Ordering (RO) is enabled, the zero padding may overwrite valid data in the next segment and corrupt the data. Older chips (P5 and older) do not automatically disable RO when EOP is enabled. On some ARM systems, data corruption was reported on 57508 (P5) chips with RO enabled. Always disable EOP on all chips on the AGG rings when TPA is enabled to fix the data corruption.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: tcp: fix TFO max_qlen accounting across reuseport migration A listener's TCP_FASTOPEN max_CVE-2026-74696 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: tcp: fix TFO max_qlen accounting across reuseport migration A listener's TCP_FASTOPEN max_qlen stops being accurate and lets through far more pending Fast Open requests than it was configured for. This only shows up with SO_REUSEPORT listener migration, where closing a listener hands its still-pending TFO children over to a surviving one. fastopenq.qlen is charged in tcp_fastopen_create_child() when the child is created and uncharged in reqsk_fastopen_remove() when the handshake completes. The uncharge follows rsk_listener of the request the child points at, and inet_reqsk_clone() has repointed the child at a new request owned by the new listener, so the ++ and the -- land on two different sockets. The new listener's qlen drifts negative and its limit no longer binds. Charge the new listener during migration, like reqsk_queue_migrated() already does for queue->young and queue->qlen.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_flow_table: drop existing skb dst before skb_dst_set_noref() Incoming skbs pCVE-2026-74695 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_flow_table: drop existing skb dst before skb_dst_set_noref() Incoming skbs passing through netfilter flowtable offload hooks (or XFRM offload path) might already carry a ref-counted dst_entry assigned during earlier RX or routing steps. Calling skb_dst_set_noref() when skb already holds a ref-counted dst overwrites skb->_skb_refdst, leaking the previous dst_entry reference count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in skb_dst_check_unset(): WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170 WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234 WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864 Drop any existing dst_entry reference with skb_dst_drop(skb) before setting the non-referenced flowtable destination.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net/ncsi: fix heap OOB read in NCSI_CMD_SEND_CMD payload length ncsi_send_cmd_nl() takes tCVE-2026-74694 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/ncsi: fix heap OOB read in NCSI_CMD_SEND_CMD payload length ncsi_send_cmd_nl() takes the number of bytes to copy from the attacker-controlled ncsi_pkt_hdr.length field of the in-band packet header, while the source buffer is the NCSI_ATTR_DATA netlink attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr). The two length sources are never cross-checked: only nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced. With hdr->length set larger than the attribute payload (up to 65535 against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies past the end of the netlink attribute buffer with unsafe_memcpy(), leaking up to ~64KB of kernel heap memory into the transmitted NCSI command packet. The destination skb is sized by the declared payload, so the write side does not overflow - this is a pure OOB read / information leak, reachable with CAP_NET_ADMIN on systems with a registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where NET_NCSI=y is standard). Reject commands whose declared payload extends past the end of the data attribute. The issue was found by the autokbug dynamic kernel fuzze

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net: prestera: validate firmware header length prestera_fw_hdr_parse() reads the firmware CVE-2026-74693 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: prestera: validate firmware header length prestera_fw_hdr_parse() reads the firmware header before checking that the firmware image contains that header. Reject images shorter than struct prestera_fw_header before decoding the magic and version fields.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net/smc: fix TOCTOU race between smc_listen_out() and listener close smc_listen_out() readCVE-2026-74692 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: net/smc: fix TOCTOU race between smc_listen_out() and listener close smc_listen_out() reads lsmc->sk.sk_state without the listener lock, then acquires lock_sock_nested() only after the check passes. This opens a window where smc_close_active() can transition the listener to SMC_CLOSED, call smc_close_cleanup_listen() to drain the accept queue, and release the lock, all between the lockless read and the delayed lock acquisition: smc_listen_work (smc_hs_wq) smc_close_active() ------------------------------- ------------------------- release_sock(child) if (sk_state == SMC_LISTEN) TRUE lock_sock(listener) sk_state = SMC_CLOSED smc_close_cleanup_listen() release_sock(listener) flush_work(tcp_listen_work) lock_sock_nested(listener) smc_accept_enqueue(listener, child) /* child enqueued on dead listener */ smc_close_active() flushes only tcp_listen_work. Work items already dispatched onto smc_hs_

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Tear down DMA paths before stopping the rings tbnet_tear_down() stops boCVE-2026-74691 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Tear down DMA paths before stopping the rings tbnet_tear_down() stops both rings and frees their frame buffers before calling tb_xdomain_disable_paths(). tb_ring_stop() zeroes the ring's descriptor base and tbnet_free_buffers() unmaps and frees the pages the frames sit in, so by the time __tb_path_deactivate_hop() polls the hop's 'pending' bit, anything still in flight has nowhere to drain to. The teardown sequence has been in this order since the driver was added. The setup path has not: commit ff7cd07f3064 ("net: thunderbolt: Enable DMA paths only after rings are enabled") moved the path enable to the end of tbnet_connected_work() and documented why: /* Both logins successful so enable the rings, high-speed DMA * paths and start the network device queue. * * Note we enable the DMA paths last to make sure we have primed * the Rx ring before any incoming packets are allowed to * arrive. */ Teardown was never updated to match, so the rings and the paths now come down in the same order they go up instead of in reverse. On an ASMedia ASM4242 host router the 'pending' bit then neve

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: s390/ism: Fix UAF of sba and ieq during ism_dev_exit() A ism interrupt handler can be actiCVE-2026-74690 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: s390/ism: Fix UAF of sba and ieq during ism_dev_exit() A ism interrupt handler can be active in parallel with ism_dev_exit(), accessing freed data structures. No new interrupts will be generated after unregister_ieq(). Drain ongoing interrupt handlers by free_irq(), before freeing ism data structures.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net/atm: fix slab-out-of-bounds read in vcc_setsockopt() vcc_setsockopt() contained an ineCVE-2026-74689 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: net/atm: fix slab-out-of-bounds read in vcc_setsockopt() vcc_setsockopt() contained an ineffective optlen check: if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname)) return -EINVAL; If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller passed a mismatched level), the length check optlen != __SO_SIZE(optname) was short-circuited and bypassed. Execution then fell through to switch(optname), calling copy_from_sockptr() assuming optval contained sufficient space. Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(), this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the expected structure size. Fix this by using copy_safe_from_sockptr(), which unconditionally validates that optlen is at least the expected size before copying. Also change the local 'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches its sizeof(int) ABI encoding on 64-bit systems.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: clear control chunk transport if it is being removed sctp_make_heartbeat_ack() cacheCVE-2026-74688 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: sctp: clear control chunk transport if it is being removed sctp_make_heartbeat_ack() caches the destination transport in chunk->transport without taking a reference. When src_out_of_asoc_ok is enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead of being transmitted immediately. If the peer transport is removed while the chunk is still queued, sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing, but only clears cached transport pointers in out_chunk_list. The queued control chunk therefore retains a dangling transport pointer. Once an ASCONF_ACK clears the suppression and the queued control chunk is transmitted, SCTP dereferences the stale transport pointer, leading to a use-after-free. Fix this by also clearing chunk->transport for queued control chunks in control_chunk_list when removing the transport.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: watchdog: at91sam9_wdt: prevent timer rearm during teardown at91_ping() rearms the watchdoCVE-2026-74687 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: watchdog: at91sam9_wdt: prevent timer rearm during teardown at91_ping() rearms the watchdog timer from its callback. timer_delete() neither waits for a running callback nor prevents it from rearming the timer, so probe failure or driver removal can leave the timer accessing the devm-allocated at91wdt after it has been freed. Use timer_shutdown_sync() on both teardown paths. It waits for a running callback and rejects any attempt by the callback to rearm the timer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: rqspinlock: Reset tail when preserving queue on deadlock Currently, the destruction of theCVE-2026-74686 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: rqspinlock: Reset tail when preserving queue on deadlock Currently, the destruction of the waiter queue is suppressed for rqspinlock in cases where a deadlock is detected. Deadlock checks happen relatively frequently (on entry for AA, within 1ms for ABBA), and waiter threads may not be involved in locking scenarios involving deadlocks. Thus, it is useful to not flush the queue and let other waiters take a stab at acquiring the lock after we detect a deadlock and exit. However, we need to follow the same logic as what we did previously for the waitq_timeout label: reset the tail, and if we cannot, signal the next waiter appropriately. In case of deadlocks, this signal would just mark the MCS node as unlocked, and in case of timeouts, it would signal RES_TIMEOUT_VAL. The difference thus is in the value propagated, which decides whether the queue remains active or gets flushed. Not doing the tail reset, and waiting for the next waiter can lead to cases where we are the final waiter, and thus no next waiter arrives, leading to intermittent stalls in this path. Once the next waiter does join, we will be unblocked. I

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Clamp negative current limits When a negative value is passed to ltc4282_CVE-2026-74685 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: hwmon: (ltc4282) Clamp negative current limits When a negative value is passed to ltc4282_write_curr(), the signed long val is cast directly to u64: drivers/hwmon/ltc4282.c:ltc4282_write_curr() { /* need to pass it in millivolt */ u32 in = DIV_ROUND_CLOSEST_ULL((u64)val * st->rsense, DECA * MICRO); ... } This cast converts negative inputs into large positive values. The subsequent division result overflows the u32 in variable, truncating to a pseudo-random positive value. When this is passed to ltc4282_write_voltage_byte(), it is clamped to the maximum limit instead of zero. Clamp val to 0 and to the maximum supported upper limit before the cast and assign the result to a 64-bit temporary variable before the division to avoid the underflow and an also possible overflow.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net: tap: set skb->dev before parsing virtio net header in tap_get_user_xdp() The commit 4CVE-2026-74684 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: net: tap: set skb->dev before parsing virtio net header in tap_get_user_xdp() The commit 4f61f133f354 ("net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null") fixed a crash in tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb(). This is required because virtio_net_hdr_to_skb() may invoke dev_parse_header_protocol(), which dereferences skb->dev. Without the assignment, a NULL pointer dereference can occur. However, tap_get_user_xdp() still parses the virtio-net header before assigning skb->dev. When the vhost TX path passes an XDP buffer containing a GSO virtio-net header but the protocol is set to zero on purpose, tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev is still NULL, resulting in a crash. Fix this by looking up the tap device and assigning skb->dev before calling tun_vnet_hdr_to_skb(), matching the ordering already used in tap_get_user(). Preserve the existing RCU read-side critical section across dev_queue_xmit().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: Input: evdev - sanitize event type index when fetching event masks The user-supplied eventCVE-2026-74683 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: evdev - sanitize event type index when fetching event masks The user-supplied event type index passed to EVIOCGMASK / EVIOCSMASK ioctls is used to index the static counts array in evdev_get_mask_cnt() and client evmasks array in evdev_get_mask(). While the event type is architecturally bounded by EV_CNT, speculative execution may mispredict bounds checks and perform out-of-bounds loads. Sanitize the event type index in evdev_get_mask_cnt() branchlessly using array_index_mask_nospec(). This clamps the index to 0 for safe array access and forces the returned count to 0 speculatively when the index is out of bounds. We do not need additional array_index_nospec() calls in evdev_get_mask() because evdev_get_mask_cnt() speculatively forces the count (and resulting xfer_size) to 0 for out-of-bounds types, preventing any speculative memory access to client evmasks array.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write on Type II inbound URBs data_ep_set_params() sizes each URBCVE-2026-74682 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write on Type II inbound URBs data_ep_set_params() sizes each URB transfer buffer before it adds the Format Type II transfer delimiter: u->packets = urb_packs; u->buffer_size = maxsize * u->packets; if (fmt->fmt_type == UAC_FORMAT_TYPE_II) u->packets++; /* for transfer delimiter */ u->urb = usb_alloc_urb(u->packets, GFP_KERNEL); buffer_size is computed from the pre-increment packet count and never recomputed, so for a Type II endpoint the buffer is one packet short of the packet count the URB is built with. prepare_inbound_urb() then lays out one iso frame per packet and never consults buffer_size: offs = 0; for (i = 0; i < urb_ctx->packets; i++) { urb->iso_frame_desc[i].offset = offs; urb->iso_frame_desc[i].length = ep->curpacksize; offs += ep->curpacksize; } urb->transfer_buffer_length = offs; urb->number_of_packets = urb_ctx->packets; The last descriptor therefore points one packet past the end of the transfer buffer, where the host controller writes device data on every inbound transfer. prepare_silent_urb() and prepare_playback_urb() bound their fill loops by

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg ibuf_len is the bulk IN (reCVE-2026-74681 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg ibuf_len is the bulk IN (receive) buffer size, but the EMSGSIZE check in usbio_bulk_msg() compares it against txbuf_len — the bulk OUT endpoint size. Both are taken independently from different endpoints in usbio_probe(), so the check is wrong when they differ. Use rxbuf_len for the IN direction. This matches the buffer that actually holds the response data.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm() If cxacru_cm() encounters CVE-2026-74680 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm() If cxacru_cm() encounters an error while submitting or waiting for snd_urb, it aborts and returns the error without killing the already submitted rcv_urb. This leaves the rcv_urb active. When this happens during initialization (e.g., in cxacru_atm_start()), the driver may ignore the error and proceed to call cxacru_poll_status(), which invokes cxacru_cm() again. Attempting to submit the still-active rcv_urb triggers a warning in usb_submit_urb(): cxacru 1-1:1.0: send of cm 0x84 failed (-104) ATM dev 0: cxacru_atm_start: CHIP_ADSL_LINE_START returned -104 ------------[ cut here ]------------ URB ffff88812658d200 submitted while active WARNING: drivers/usb/core/urb.c:379 at usb_submit_urb+0x79/0x18b0 drivers/usb/core/urb.c:379 ... Call Trace: <TASK> cxacru_cm+0x21a/0xf10 drivers/usb/atm/cxacru.c:631 cxacru_cm_get_array drivers/usb/atm/cxacru.c:722 [inline] cxacru_poll_status+0x178/0x1110 drivers/usb/atm/cxacru.c:828 cxacru_atm_start+0x185/0x360 drivers/usb/atm/cxacru.c:814 usbatm_atm_init+0x144/0x3a0 drivers/usb/atm/usbatm.c:927 usbatm_usb_pro

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Use unsigned int for ndp_index The variable ndp_index is declared as aCVE-2026-74679 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Use unsigned int for ndp_index The variable ndp_index is declared as a signed integer, but it stores the return value of get_ncm(), which is unsigned. A malicious host can supply a large offset that overflows the signed ndp_index, making it negative. Because ndp_index is compared against unsigned bounds, this negative value bypasses sanity checks and leads to an out-of-bounds read when calculating the address of the NDP block (ntb_ptr + ndp_index). Fix this by changing ndp_index to unsigned int to ensure consistent unsigned comparisons throughout the function.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: fix skb leak in ax88179_tx_fixup() When the interface has NETIF_F_CVE-2026-74678 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: net: usb: ax88179_178a: fix skb leak in ax88179_tx_fixup() When the interface has NETIF_F_SG enabled and skb_linearize() fails in ax88179_tx_fixup(), the function returns NULL without freeing the skb. usbnet_start_xmit() treats a NULL return from tx_fixup() as a drop (info->flags does not set FLAG_MULTI_PACKET for this driver), jumping to the "drop" label where it does `if (skb) dev_kfree_skb_any(skb)`. Because tx_fixup() returned NULL, the local skb variable in usbnet_start_xmit() is NULL, so the original skb is never freed — a memory leak on every TX frame whose linearization fails (i.e. under memory pressure). Free the skb before returning, matching the error handling already used for the pskb_expand_head() failure path in the same function.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net: usb: ipheth: fix carrier_work UAF on disconnect ipheth_sndbulk_callback() re-arms theCVE-2026-74677 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: usb: ipheth: fix carrier_work UAF on disconnect ipheth_sndbulk_callback() re-arms the carrier-check work on any non-zero URB status: else schedule_delayed_work(&dev->carrier_work, 0); Nothing ties that to the interface being up, so the work can be armed again after ipheth_close() has already drained it, and stay armed until the netdev whose private area embeds it is freed. On unplug with a TX URB in flight, ipheth_disconnect() drains the work through unregister_netdev() -> ipheth_close() -> cancel_delayed_work_sync() and only then calls ipheth_kill_urbs(). usb_kill_urb() completes the in-flight TX URB with -ENOENT, so ipheth_sndbulk_callback() runs after the drain and re-arms carrier_work. The same completion also re-arms the work if the interface is only brought down while a TX URB is in flight, and ipheth_carrier_check_work() then keeps re-queueing itself once a second. unregister_netdev() does not call ipheth_close() for an already-down interface, so nothing drains it on the later unplug either. In both cases free_netdev() frees the netdev while carrier_work is still pending, and ipheth_carrier_ch

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: vt: add permission check for KDSKBMETA ioctl KDSKBMETA modifies keyboard meta mode but lacCVE-2026-74676 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: vt: add permission check for KDSKBMETA ioctl KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process to change meta mode on a non-controlling console without authorization.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: vt: stabilize tty reference in kbd_keycode with tty_port_tty_get kbd_keycode() reads vc->pCVE-2026-74675 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: vt: stabilize tty reference in kbd_keycode with tty_port_tty_get kbd_keycode() reads vc->port.tty without acquiring a tty reference, racing against con_shutdown() which clears port.tty under a different lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference for the duration the tty pointer is needed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: mm: fix incorrect flush address in direct page table reclaim When zap_pte_range reclaims aCVE-2026-74674 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: mm: fix incorrect flush address in direct page table reclaim When zap_pte_range reclaims a page table, it does: pte_free_tlb(tlb, pmd_pgtable(pmdval), addr); and this is unconditionally wrong: if this code executes, addr *always* points one past the end of the range covered by the table. The addr parameter is used to flush the TLB (really the paging-structure-cache) to drop references to the to-be-freed table, and any architecture that cares about the parameter will flush the wrong address. (But they'll still free the correct page). I think it's worth contemplating why the kernel works at all. If we hit the offending line of code, we will first clear the PMD entry (line 1954, zap_empty_pte_table), then we will issue pending flushes if force_flush is set (tlb_flush_mmu_tlbonly(tlb)), then we will skip the retry on line 1979 (phew!), and then we will do the offending pte_free_tlb call. *Or* we will clear the PMD entry immediately before pte_free_tlb (line 1983, zap_pte_table_if_empty). If we have any pending flushes (i.e. we actually zapped any last-level entries) at the time we clear the PMD entry, the

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: Input: evdev - fix information leak in evdev_pass_values() In evdev_pass_values(), the inpCVE-2026-74673 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: evdev - fix information leak in evdev_pass_values() In evdev_pass_values(), the input_event structure is allocated on the kernel stack and populated field-by-field. However, it is never fully initialized. On architectures where struct input_event contains explicit or implicit padding (such as the 32-bit __pad field on SPARC64), these padding bytes are left uninitialized. When this event structure is subsequently passed to the client buffer and later copied to userspace, the uninitialized padding bytes leak kernel stack memory, potentially exposing sensitive information. Similar issues exist in __evdev_queue_syn_dropped and __pass_event. Fix this by explicitly zeroing the entire event structure with memset() before populating its fields. This ensures all padding bytes are cleared before the data crosses the security boundary.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF Patch series "mm: fix UACVE-2026-74672 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: acquire init_mm lock on huge vmap to avoid ptdump UAF Patch series "mm: fix UAF caused by race between ptdump and vmap pgtable freeing", v6. Kernel page table walkers fall into two broad categories - those ranges where no exclusion is required via walk_kernel_page_table_range_lockless() and those where exclusion is required via walk_kernel_page_table_range() or walk_page_range_debug(). The former category is used only by arm64 arch code operating on ranges it both wholly owns and does not concurrently write. The latter category consists of kernel page table walkers operating on ranges that are wholly owned (but which need exclusion against concurrent writers). The lock used for exclusion is the mmap lock, and for kernel ranges this is the mmap lock on init_mm. ptdump is a special case being both the only user of walk_page_range_debug(), and the only case in which it walks ranges it does not own. This presents a problem, as page tables may be freed under ptdump. And indeed there is a use-after-free bug in the kernel as a result, which this series addresses. vmap promotes page tables to huge lea

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ima: fix out-of-bounds read in xattr_verify() The digest-length check in xattr_verify() miCVE-2026-74671 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ima: fix out-of-bounds read in xattr_verify() The digest-length check in xattr_verify() mixes int and size_t: if (xattr_len - sizeof(xattr_value->type) - hash_start >= iint->ima_hash->length) sizeof() yields size_t, so the usual arithmetic conversions promote the whole left-hand side to unsigned 64-bit before the subtraction runs. For a truncated xattr this underflows instead of going negative: a 1-byte IMA_XATTR_DIGEST_NG xattr (xattr_len == 1, hash_start == 1) turns "1 - 1 - 1" into SIZE_MAX, which is trivially >= ima_hash->length. The check then passes and the following memcmp() reads iint->ima_hash->length bytes starting past the end of the buffer vfs_getxattr_alloc() allocated for it. Nothing upstream clamps xattr_len back into a safe range first: ima_get_hash_algo() only special-cases xattr_len < 2 to pick a default algorithm, and evm_verifyxattr() returns INTEGRITY_UNKNOWN rather than failing when no HMAC key is loaded, so a truncated security.ima value reaches the length check as-is. Rewrite the comparison so every operand stays a signed int and no implicit conversion to size_t can occur.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ipvs: stop estimator after disabled calc phase IPVS estimator kthread 0 starts with zeroedCVE-2026-74670 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ipvs: stop estimator after disabled calc phase IPVS estimator kthread 0 starts with zeroed chain and tick limits until its initial calculation phase completes. If network namespace teardown clears ipvs->enable during that phase, ip_vs_est_calc_phase() can return without installing positive limits. The kthread can then continue into its main loop and drain est_temp_list with zero chain_max, tick_max and est_max_count values. Each enqueue consumes one available tick row, but est_count never reaches the zero est_max_count value. After all rows are consumed, the row lookup returns IPVS_EST_NTICKS and ip_vs_enqueue_estimator() writes past the ticks and tick_len arrays. Exit kthread 0 after the calculation phase if the kthread is stopping or IPVS has been disabled. That keeps temporary estimators from being drained after the limits failed to initialize. Estimator kthreads can now self-exit before teardown or reload stops kd->task. Keep an extra task reference after creation and release it with kthread_stop_put(), so kd->task remains valid until the stop paths consume that reference.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ipvs: clear IPv4 options after rebasing tunnel ICMP errors ip_vs_in_icmp() rebases an skb CVE-2026-74669 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: ipvs: clear IPv4 options after rebasing tunnel ICMP errors ip_vs_in_icmp() rebases an skb from the outer ICMP packet to the quoted original request before passing it to icmp_send(). However, IPCB(skb)->opt still describes the outer IPv4 header. A timestamp option in the outer header can therefore leave an offset that points into the quoted transport header after the rebase. __ip_options_echo() treats a byte at that stale location as the option length and copies it into the fixed-size option storage on the __icmp_send() stack, causing a stack out-of-bounds write. Clear the stale option metadata after resetting the network header. Keep the remaining control block fields, including the ingress interface used by the ICMP response path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: packet: use consistent hard_header_len in TX_RING send path tpacket_snd() reads dev->hard_CVE-2026-74668 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: packet: use consistent hard_header_len in TX_RING send path tpacket_snd() reads dev->hard_header_len independently for skb allocation and header construction in tpacket_fill_skb(). Concurrent netdevice reconfiguration can therefore make the reserved headroom smaller than the amount later pushed, or make copylen - hard_header_len negative. Snapshot hard_header_len once before processing ring frames and use it for the frame limit, headroom allocation, copy length, and skb construction. Pass the snapshot to tpacket_fill_skb(). The separate SOCK_DGRAM consistency problem between hard_header_len and header_ops->create is not addressed here.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net/packet: reset the MAC header on the packet-socket transmit path packet_parse_headers()CVE-2026-74667 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net/packet: reset the MAC header on the packet-socket transmit path packet_parse_headers() resets the MAC header only for a SOCK_RAW frame whose socket did not bind a protocol. A protocol-bound SOCK_RAW socket, any SOCK_DGRAM frame, and the legacy SOCK_PACKET path therefore leave skb->mac_header unset here. For frames sent via __dev_queue_xmit() this is harmless: it resets the MAC header unconditionally. But the packet-socket PACKET_QDISC_BYPASS path uses dev_direct_xmit(), which does not, so the frame reaches ndo_start_xmit() with the MAC header unset. A driver that reads eth_hdr(skb) on transmit then dereferences skb->head + (u16)~0, an out-of-bounds access ~64 KiB past the head -- the same class fixed for one consumer in commit f5089008f90c ("macsec: do not read an unset MAC header in macsec_encrypt()"). packet_parse_headers() runs only on the transmit path, where skb->data points at the start of the L2 header for every packet-socket type regardless of its length: SOCK_RAW and SOCK_PACKET carry a user-supplied header and SOCK_DGRAM has one built by dev_hard_header(). Reset the MAC header unconditionally, mir

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: packet: synchronize pressure clearing with ring reconfiguration packet_set_ring() updates CVE-2026-74666 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: packet: synchronize pressure clearing with ring reconfiguration packet_set_ring() updates the RX ring state under sk_receive_queue.lock, but used to publish the tpacket receive mode through po->prot_hook.func after releasing that lock. packet_poll() and packet_recvmsg() can then run the pressure clearing path after the ring has been cleared while still seeing tpacket_rcv, causing __packet_rcv_has_room() to dereference stale or NULL ring storage. Move the existing receive hook assignment into the same sk_receive_queue.lock section as the ring state update. Keep the assignment otherwise unchanged, including on TX ring reconfiguration, to avoid adding behavior changes that are not required for the fix. Serialize packet_recvmsg() pressure clearing with the same queue lock only after PACKET_SOCK_PRESSURE has been observed. If the flag is clear and the socket has moved away from tpacket_rcv, packet_set_ring() has already detached the socket and waited for synchronize_net(), so no new packet input can set the flag again. packet_poll() already holds sk_receive_queue.lock, so it uses the new unlocked helper directly.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net: fix skb length accounting after generic XDP frag adjustment Generic XDP exposes non-lCVE-2026-74665 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: net: fix skb length accounting after generic XDP frag adjustment Generic XDP exposes non-linear skb fragments through an xdp_buff. If an XDP program adjusts the fragment area, bpf_prog_run_generic_xdp() copies xdp_frags_size back to skb->data_len but leaves skb->len containing the old fragment contribution. After a fragment shrink, this makes skb_headlen() larger than the actual linear area. In the reproduced UDP receive path, __skb_datagram_iter() copied 1024 bytes past the actual linear tail to userspace, starting at struct skb_shared_info. The copied bytes included the affected skb's nr_frags, xdp_frags_size and a kernel pointer from skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same amount and truncated at the end. Subtract the old data_len before replacing it and add the new data_len afterwards, keeping skb->len and skb->data_len synchronized. A 60000-byte UDP datagram on a veth pair with MTU 64000 was shortened by 1024 bytes from its fragment area. Before the fix, all 10 runs produced corrupted payloads. After the fix, all 10 runs matched the expected payload exactly.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reallocate update replies for mismatched IDs ovs_flow_cmd_new() preallocCVE-2026-74664 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reallocate update replies for mismatched IDs ovs_flow_cmd_new() preallocates the optional reply skb before it takes ovs_mutex and before it knows which existing flow will be updated. That is normally fine because the skb is sized from the request flow identifier. That identifier also becomes the inserted flow's identifier. For updates, however, a request with a UFID may miss the UFID lookup and then fall back to the flow key lookup. That lookup can legitimately find an existing key-identified flow. UFIDs are optional and the flow key is the primary identifier. For echoed replies, ovs_flow_cmd_fill_info() writes the matched flow's identifier, not the request identifier used for the preallocation. A short request UFID can therefore leave too little room for the key identifier. The fill can then fail with -EMSGSIZE and hit the BUG_ON(error < 0) in the update path. Once the update target has been resolved, reallocate the reply skb if the matched flow needs a larger reply than the request identifier allowed. Do this before replacing the actions so the request can still fail cleanly if the rar

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: reject overly deep qdisc hierarchies Deep qdisc hierarchies can lead to excessiCVE-2026-74663 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net/sched: reject overly deep qdisc hierarchies Deep qdisc hierarchies can lead to excessive recursion in qdisc tree walkers and exhaust the kernel stack. The existing loop check does not cover the create-and-graft path, so a hierarchy can still be extended by creating a new child qdisc below an already deep parent. Store the hierarchy depth in struct Qdisc and update it when qdiscs are grafted. Reject new child qdiscs once the parent is already at the maximum allowed depth.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: inet: frags: publish queues before arming timer inet_frag_create() arms the fragment queueCVE-2026-74662 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: inet: frags: publish queues before arming timer inet_frag_create() arms the fragment queue timer before inserting the queue into the fqdir rhashtable. If the namespace fragment timeout is zero or negative, the timer can run before the queue is published. The timer callback then marks the queue complete, tries to remove a node that is not in the hash table yet, and drops the anticipated hash reference. Creation can subsequently publish the completed queue without restoring that reference, leaving a stale hash node after the caller drops the remaining reference. Publish the queue first and arm the timer while holding the queue lock. This makes timer expiry wait until the queue is visible in the hash table, so inet_frag_kill() can remove the node and balance the hash reference.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: mac802154: fix netdev use-after-free in beacon worker mac802154_beacon_worker() reads locaCVE-2026-74661 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: mac802154: fix netdev use-after-free in beacon worker mac802154_beacon_worker() reads local->beacon_req under RCU and derives the sub-interface from the request, but then drops the RCU read lock and continues to use both sdata and the embedded wpan_dev. mac802154_stop_beacons_locked() cancels only pending beacon work, clears local->beacon_req and frees the request. A beacon worker that is already running can therefore continue after interface teardown and dereference the freed netdev private area. The scan worker already pins the netdev before leaving RCU. Apply the same lifetime rule to the beacon worker: take a netdev reference while the request is still protected by RCU, and release it on all paths that continue after the reference is acquired.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: ebt_nflog: pin the NFLOG backend nf_log_unregister() runs after the per-net teaCVE-2026-74660 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: netfilter: ebt_nflog: pin the NFLOG backend nf_log_unregister() runs after the per-net teardown so its final RCU grace period also drains readers that obtained the logger from a per-net binding. However, ebt_nflog passes an explicit ULOG log type to nf_log_packet() without holding a reference on the selected logger module, unlike the xt_NFLOG and nft_log frontends. An ebtables nflog rule can therefore remain callable while nfnetlink_log is unloaded. The resulting interleaving is: CPU 0 CPU 1 nfnetlink_log_fini() unregister_pernet_subsys() kfree(nfnl_log_pernet(net)) ebt_nflog_tg() nf_log_packet() nfulnl_log_packet() instance_lookup_get_rcu() The global ULOG logger is still registered at this point, so CPU 1 dereferences the per-net state after CPU 0 has freed it. KASAN reported: BUG: KASAN: slab-use-after-free in instance_lookup_get_rcu Read of size 8 at addr ff110001052e6210 by task poc/92 Call

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net: bridge: mrp: fix uninitialised bytes on the wire br_mrp_alloc_test_skb() builds MRP tCVE-2026-74659 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: bridge: mrp: fix uninitialised bytes on the wire br_mrp_alloc_test_skb() builds MRP test frames on an skb from dev_alloc_skb(), which does not clear the linear data area. On the MRA ring-role branch the sub-option TLV header is appended with sub_tlv = skb_put(skb, sizeof(*sub_tlv)); sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR; so sub_tlv->length is never written, and the two trailing alignment bytes are appended with a bare skb_put() that does not clear them either. The neighbouring oui and sub_opt regions are explicitly zeroed, so three uninitialised bytes are left in every MRA MRP_Test frame that goes out. Put the sub-option TLV header and the alignment padding in a single skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no payload, so the zeroed length field is already the value it should have.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: futex: Prevent robust futex exit race some more A robust futex unlock stores 0 over the whCVE-2026-74658 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: futex: Prevent robust futex exit race some more A robust futex unlock stores 0 over the whole futex value - wiping FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot notification: the protocol relies on its recipient to either acquire the futex (and eventually unlock while aware of the remaining contention) or re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed before it can do either, the kernel must jump in and wake the next task down the line. This is a known complication of the futex protocol with a previous partial fix in commit ca16d5bee598 ("futex: Prevent robust futex exit race"). Unfortunately, that fix is insufficient. If a third task re-acquired the futex through the uncontended fast path in the meantime, the notification is lost: robust exit processing sees that it is owned by another task and does nothing, while the new owner sees no FUTEX_WAITERS when it unlocks and wakes nobody. The remaining waiters sleep forever behind a free futex: A owns the futex, B and C sleep in FUTEX_WAIT uval == A | FUTEX_WAITERS A robu

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix fib_nlmsg_size() for RTA_VIA nexthops fib_nlmsg_size() still estimates nexthop sCVE-2026-74657 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix fib_nlmsg_size() for RTA_VIA nexthops fib_nlmsg_size() still estimates nexthop space as if every gateway is encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA. As a result, route notifications can allocate an skb that is too small. fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With panic_on_warn set, this becomes a kernel panic. Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is actually present.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ipv4: fix use-after-free in fib_nhc_update_mtu() fib_nhc_update_mtu() walks the nexthop exCVE-2026-74656 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ipv4: fix use-after-free in fib_nhc_update_mtu() fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but RTNL does not serialize this walk with PMTU exception updates. The walk uses rcu_dereference_protected() with a constant true condition without holding fnhe_lock. The following interleaving can therefore occur: CPU 0 CPU 1 fib_nhc_update_mtu() update_or_create_fnhe() load fnhe spin_lock_bh(&fnhe_lock) fnhe_remove_oldest() unlink fnhe kfree_rcu(fnhe, rcu) <quiescent state> access fnhe after grace period KASAN reported: BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410 Read of size 8 at addr ffff888107d49000 by task poc/90 Call Trace: fib_nhc_update_mtu+0x3df/0x410 fib_sync_mtu+0x7a/0xd0 fib_netdev_event+0x229/0x3f0 netif_set_mtu_ext+0x33a/0x570 dev_set_mtu+0x88/0x120 The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a pair and other

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: fix TX DMA buffer flush When transmit flushing a qcom-geni UART during CVE-2026-74655 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: fix TX DMA buffer flush When transmit flushing a qcom-geni UART during an ongoing TX DMA, the UART gets stuck infinitely repeating corrupted TX DMA frames. The DMA-mode uart_ops does not provide a flush_buffer callback, so an in-flight transfer can complete after serial core has reset the transmit kfifo, underflowing its length and resubmitting page-sized transfers indefinitely. Add one that stops the transfer and clears tx_remaining and tx_queued. The stop path was also broken: it unmapped the buffer while the serial engine could still read it, and never reset the TX DMA state machine. Cancel the main sequencer command first, then reset the state machine and wait for it before unmapping. Drop the early return so a pending mapping is also cleaned up when the main command is inactive. The bug can be triggered from userspace with a large write immediately followed by TCOFLUSH. A following tcdrain will hang forever. The bug was reproduced and this fix was validated on Arduino Uno Q (QRB2210) using /dev/ttyHS1.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: serial: 8250_dma: Clear stale RX state on shutdown serial8250_release_dma() terminates RX CVE-2026-74654 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: serial: 8250_dma: Clear stale RX state on shutdown serial8250_release_dma() terminates RX DMA and releases the channel, but leaves rx_running set. If the port is closed while an RX transfer is active, the stale state remains while rxchan is NULL until the channel is requested again on the next open. The DesignWare BUSY workaround added by commit a7b9ce39fbe4 ("serial: 8250_dw: Ensure BUSY is deasserted") calls serial8250_rx_dma_flush() from the LCR write path during startup. This happens before serial8250_request_dma() obtains a new RX channel. On reopen, the stale rx_running state therefore makes the flush path pass a NULL channel to dmaengine_pause(), causing a kernel Oops. Clear rx_running after terminating RX DMA, matching the TX cleanup. Also make the flush helper return if the DMA object or RX channel is not available so startup and teardown paths cannot pass a NULL channel to the DMAengine API.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx The NXP LPC32xx UART (PORT_LCVE-2026-74653 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT (0x0c) but LSR.DR is clear. A character timeout is only cleared by reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is set, so nothing ever clears the condition. The interrupt is level-triggered and re-fires immediately, so on a single-core ARM926 the resulting interrupt storm livelocks the CPU. It is reproducible when userspace repeatedly opens the front-panel port (ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping the soft-lockup detector in serial8250_handle_irq_locked(). LPC32xx has no dedicated 8250 glue driver, it's driven by the generic 8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up in of_platform_serial_setup() the same way fsl8250_handle_irq is installed. The handler follows dw8250_handle_irq(): on an RX timeout with an empty FIFO (LSR.DR and LSR.BI clear) it does one th

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.