Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
29,215 results · page 73 of 585
Aug 11, 2026Insufficient input validation vulnerability in the listed NETGEAR models allows authenticated administrators connected to the local network to make unauthorizCVE-2026-11737 · Network & remote access · NETGEAR · reported by a2826606-91e7-4eb6-899e-8484bd4575d5Medium 4.3
Insufficient input validation vulnerability in the listed NETGEAR models allows authenticated administrators connected to the local network to make unauthorized modification to the device software and functionality.
- Product
- RAX20
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordkb.netgear.comnetgear.com
Aug 11, 2026A stack-based buffer overflow vulnerability affects certain NETGEAR models allowing an authenticated admin user to make unauthorized modification to router softCVE-2026-11736 · Network & remote access · NETGEAR · reported by a2826606-91e7-4eb6-899e-8484bd4575d5Low 1.9
A stack-based buffer overflow vulnerability affects certain NETGEAR models allowing an authenticated admin user to make unauthorized modification to router software and functionality.
- Product
- RAX20
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordkb.netgear.comnetgear.com
Aug 11, 2026A stack-based buffer overflow vulnerability affects the listed NETGEAR models allowing an authenticated admin user to make unauthorized modification to the routCVE-2026-11735 · Network & remote access · NETGEAR · reported by a2826606-91e7-4eb6-899e-8484bd4575d5Low 1.9
A stack-based buffer overflow vulnerability affects the listed NETGEAR models allowing an authenticated admin user to make unauthorized modification to the router's software and functionality.
- Product
- R7000
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordkb.netgear.comnetgear.com
Aug 11, 2026A buffer overflow vulnerability in the listed NETGEAR models allows an authenticated admin user to cause the affected device to become temporarily unavailable.CVE-2026-11734 · Network & remote access · NETGEAR · reported by a2826606-91e7-4eb6-899e-8484bd4575d5Low 1.1
A buffer overflow vulnerability in the listed NETGEAR models allows an authenticated admin user to cause the affected device to become temporarily unavailable.
- Product
- MR70
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordkb.netgear.comnetgear.com
Aug 11, 2026A buffer overflow vulnerability in the listed NETGEAR models allows a device administrator to temporarily interrupt the normal operation of the affected device.CVE-2026-11733 · Network & remote access · NETGEAR · reported by a2826606-91e7-4eb6-899e-8484bd4575d5Low 1.1
A buffer overflow vulnerability in the listed NETGEAR models allows a device administrator to temporarily interrupt the normal operation of the affected device.
- Product
- RAX41
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordkb.netgear.comnetgear.com
Aug 11, 2026A server-side request forgery vulnerability in Apioo Fusio 8.8.3 allows authenticated consumer-role users to make the server issue HTTP requests to internal netCVE-2026-72598 · Other software · Apioo · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cMedium 6.5
A server-side request forgery vulnerability in Apioo Fusio 8.8.3 allows authenticated consumer-role users to make the server issue HTTP requests to internal network addresses by registering a webhook URL pointing to an internal host. The webhook registration endpoint validates URL syntax via FILTER_VALIDATE_URL but applies no IP or host denylist. When the registered event fires, the server issues an HTTP POST to the attacker-supplied internal URL.
- Product
- Fusio
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 11, 2026A path traversal vulnerability was discovered in the Offline archives functionality of the local web interface due to insufficient validation of an input parameCVE-2026-33922 · Other software · Nozomi Networks · reported by prodsec@nozominetworks.comMedium 6.8
A path traversal vulnerability was discovered in the Offline archives functionality of the local web interface due to insufficient validation of an input parameter. A local user with administrative credentials for the web interface could submit an archive name containing traversal sequences and delete arbitrary files reachable by the Arc process, which runs with administrative privileges on the host.
- Product
- Arc
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordsecurity.nozominetworks.com
Aug 11, 2026The Windows installer deployed Npcap leaving its access restriction option at the insecure default value, so the driver was accessible to every local user of thCVE-2026-33921 · Other software · Nozomi Networks · reported by prodsec@nozominetworks.comMedium 4.8
The Windows installer deployed Npcap leaving its access restriction option at the insecure default value, so the driver was accessible to every local user of the host instead of being restricted to administrators only. A local user without administrative privileges could use the Npcap driver to capture the traffic reaching the host, which discloses information belonging both to the host and to other systems on the same network segment, and to send arbitrary raw packets on that segment.
- Product
- Arc
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordsecurity.nozominetworks.com
Aug 10, 2026Due to a Cross-Site Scripting (XSS) vulnerability in SAP NetWeaver Application Server ABAP, an authenticated attacker could generate a malicious link and make iCVE-2026-66779 · Network & remote access · SAP_SE · reported by cna@sap.comMedium 6.3
Due to a Cross-Site Scripting (XSS) vulnerability in SAP NetWeaver Application Server ABAP, an authenticated attacker could generate a malicious link and make it publicly accessible. If an authenticated victim accesses this link, the injected input is processed and reflected within the DOM on the client side during page rendering, resulting in the execution of malicious content in the victim's browser context. Successful exploitation could result in a high impact to the confidentiality and a low impact to the integrity of the system, while availability remains unaffected.
- Product
- SAP NetWeaver Application Server ABAP
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026SAP NetWeaver and ABAP Platform (Change and Transport System - Customer Transport Integration Wizard) allows a low-privileged user to modify configuration tableCVE-2026-58241 · Network & remote access · SAP_SE · reported by cna@sap.comMedium 4.2
SAP NetWeaver and ABAP Platform (Change and Transport System - Customer Transport Integration Wizard) allows a low-privileged user to modify configuration tables that control access to data objects during specific operations. These unauthorized modifications could result in processing delays and operational disruption, leading to a low impact on the integrity and availability of the application with no impact on confidentiality.
- Product
- SAP NetWeaver and ABAP Platform (Change and Transport System - Customer Transport Integration Wizard
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026SAP NetWeaver Application Server ABAP and ABAP Platform allow an attacker with high privileges to bypass missing security controls on an internal code path leadCVE-2026-58236 · Network & remote access · SAP_SE · reported by cna@sap.comMedium 5.5
SAP NetWeaver Application Server ABAP and ABAP Platform allow an attacker with high privileges to bypass missing security controls on an internal code path leading to operating system command execution. Successful exploitation could allow the attacker to execute OS-level commands that write to the operating system or stop the SAP system, resulting in no impact on confidentiality, low impact on integrity, and high impact on availability.
- Product
- SAP NetWeaver Application Server ABAP and ABAP Platform
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026SAP NetWeaver Application Server Java (Adobe Document Service) uses outdated open source cryptographic and data transfer libraries that contain known vulnerabilCVE-2026-58235 · Network & remote access · SAP_SE · reported by cna@sap.comMedium 6.3
SAP NetWeaver Application Server Java (Adobe Document Service) uses outdated open source cryptographic and data transfer libraries that contain known vulnerabilities addressed in later versions. A low-privileged authenticated attacker could potentially leverage these weaknesses against the affected component, though no specific exploit is currently known. Successful exploitation could result in low impact on confidentiality, integrity, and availability of the system.
- Product
- SAP NetWeaver AS Java (Adobe Document Services)
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026SAP NetWeaver Application Server ABAP allows an unauthenticated attacker to exploit logical errors in DIAG protocol parsing, resulting in memory corruption.CVE-2026-34265 · Network & remote access · SAP_SE · reported by cna@sap.comCritical 9.8
SAP NetWeaver Application Server ABAP allows an unauthenticated attacker to exploit logical errors in DIAG protocol parsing, resulting in memory corruption. This vulnerability could potentially disclose sensitive system information or crash the system, leading to a high impact on the confidentiality, integrity, and availability of the application.
- Product
- SAP NetWeaver and ABAP Platform
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026tls_opt_dtls_peer_connection_id_value_get() in subsys/net/lib/sockets/sockets_tls.c, which handles getsockopt(SOL_TLS, TLS_DTLS_PEER_CID_VALUE), passed the callCVE-2026-8718 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 8.4
tls_opt_dtls_peer_connection_id_value_get() in subsys/net/lib/sockets/sockets_tls.c, which handles getsockopt(SOL_TLS, TLS_DTLS_PEER_CID_VALUE), passed the caller-supplied optval directly to mbedtls_ssl_get_peer_cid() without verifying the buffer was at least MBEDTLS_SSL_CID_OUT_LEN_MAX (default 32) bytes. mbedtls_ssl_get_peer_cid() copies the peer-negotiated DTLS Connection ID (length 1..MBEDTLS_SSL_CID_OUT_LEN_MAX) into that buffer without a destination-size parameter, so a caller-supplied optlen smaller than the CID causes a write of up to 31 bytes past the buffer end. In CONFIG_USERSPACE builds the getsockopt syscall verifier (z_vrfy_zsock_getsockopt) bounce-buffers the user's optval into a kernel allocation of exactly optlen bytes (k_usermode_alloc_from_copy -> z_thread_malloc), so an unprivileged user thread that passes a small optlen on a connected DTLS socket with Connection ID enabled induces a kernel-heap buffer overflow, with the overflowing content being the remote peer's CID. The defect requires CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID, an established DTLS session with a negotiated peer CID, and (for the kernel-crossing case) CONFIG_USERSPACE. Introduced when the TLS_DT
- Product
- zephyr
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026Certain web interface components in affected TP-Link Aginet devices do not validate and sanitize user-supplied input properly before passing it to system-level CVE-2025-30241 · Network & remote access · TP-Link Systems Inc. · reported by f23511db-6c3e-4e32-a477-6aa17d310630High 8.6
Certain web interface components in affected TP-Link Aginet devices do not validate and sanitize user-supplied input properly before passing it to system-level command execution functions. An authenticated adjacent attacker may inject specially crafted input to execute arbitrary operation system commands with elevated privileges. Successful exploitation may allow execution of arbitrary system commands, potentially leading to full device compromise.
- Product
- HB810(US2) V1.0/1.6/2.0/2.6
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026The affected TP-Link Aginet devices do not properly validate symbolic links created on external USB storage devices.CVE-2025-30240 · Network & remote access · TP-Link Systems Inc. · reported by f23511db-6c3e-4e32-a477-6aa17d310630Medium 5.1
The affected TP-Link Aginet devices do not properly validate symbolic links created on external USB storage devices. By placing a crafted symbolic link on supported storage media, an attacker may cause the system to resolve the link. Successful exploitation may allow unauthorized read access to sensitive files within the device filesystem.
- Product
- HB810(US2) V1.0/1.6/2.0/2.6
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026In affected TP-Link Aginet devices, use of hardcoded cryptographic keys embedded in the firmware to protect sensitive configuration data may allow an attacker wCVE-2025-30239 · Network & remote access · TP-Link Systems Inc. · reported by f23511db-6c3e-4e32-a477-6aa17d310630High 8.5
In affected TP-Link Aginet devices, use of hardcoded cryptographic keys embedded in the firmware to protect sensitive configuration data may allow an attacker who has access to device storage to recover the keys and decrypt stored data. Successful exploitation may allow access to decrypted sensitive configuration data, including credentials and service-related information.
- Product
- HB810(US2) V1.0/1.6/2.0/2.6
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026In affected TP-Link Aginet devices, insufficient authorization validation allows authenticated low-privileged users to execute higher-privileged operations.CVE-2025-30238 · Network & remote access · TP-Link Systems Inc. · reported by f23511db-6c3e-4e32-a477-6aa17d310630High 8.6
In affected TP-Link Aginet devices, insufficient authorization validation allows authenticated low-privileged users to execute higher-privileged operations. An attacker may perform administrative actions such as creating privileged accounts or modifying critical configuration settings.
- Product
- HB810(US2) V1.0/1.6/2.0/2.6
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026The affected TP-Link Aginet devices contain a flaw in the web management interface where authentication checks are not consistently enforced on certain endpointCVE-2025-30237 · Network & remote access · TP-Link Systems Inc. · reported by f23511db-6c3e-4e32-a477-6aa17d310630High 8.7
The affected TP-Link Aginet devices contain a flaw in the web management interface where authentication checks are not consistently enforced on certain endpoints. An attacker can send specially crafted requests to bypass authentication and directly invoke privileged functionality without valid credentials. This issue arises from improper enforcement of access control mechanisms on sensitive operations. Successful exploitation may allow an unauthenticated attacker to execute privileged operations and gain full control of the device.
- Product
- HB810(US2) V1.0/1.6/2.0/2.6
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026Mastodon is a free, open-source social network server based on ActivityPub.CVE-2026-72916 · Other software · mastodon · reported by GitHubMedium 6.3
Mastodon is a free, open-source social network server based on ActivityPub. Prior to 4.4.21, 4.5.14, 4.6.4, and 4.7.0-beta.1, PrivateAddressCheck.private_address? in app/lib/private_address_check.rb normalized IPv4-mapped IPv6 addresses but did not recognize IPv4-compatible IPv6 addresses with IPAddr#ipv4_compat?. An attacker could supply an address in the omitted range to bypass the ALLOWED_PRIVATE_ADDRESSES protection and make Mastodon send HTTP requests to loopback interfaces, potentially accessing private resources and services. Exploitation requires a system that supports the obsolete IPv4-compatible IPv6 mechanism. This issue is fixed in versions 4.4.21, 4.5.14, 4.6.4, and 4.7.0-beta.1.
- Product
- mastodon
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026Mastodon is a free, open-source social network server based on ActivityPub.CVE-2026-72915 · Other software · mastodon · reported by GitHubHigh 7.5
Mastodon is a free, open-source social network server based on ActivityPub. From 4.6.0-beta.1 until 4.6.4 and 4.7.0-beta.1, any logged-in local user could use the show action in app/controllers/admin/collections_controller.rb to access personally identifying information about another local user in a collection because the controller used the general collection policy instead of the admin collection policy namespace. The exposed data included the other user's current email address and last-used IP address. This issue is fixed in versions 4.6.4 and 4.7.0-beta.1.
- Product
- mastodon
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026Mastodon is a free, open-source social network server based on ActivityPub.CVE-2026-72914 · Other software · mastodon · reported by GitHubHigh 7.5
Mastodon is a free, open-source social network server based on ActivityPub. Prior to 4.4.21, 4.5.14, 4.6.4, and 4.7.0-beta.1, the administrative statistics endpoints handled by Api::V1::Admin::MeasuresController and Api::V1::Admin::RetentionController checked authorization only after beginning expensive calculations. Anonymous callers could submit keys, start_at, and end_at parameters that caused long-running SQL queries in Admin::Metrics::Measure, Admin::Metrics::Retention, and Admin::Metrics::Dimension::BaseDimension, allowing repeated requests to exhaust server resources. This issue is fixed in versions 4.4.21, 4.5.14, 4.6.4, and 4.7.0-beta.1.
- Product
- mastodon
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026Use of Hard-coded Credentials vulnerability in Zyxel Networks WAH7601 allows Read Sensitive Constants Within an Executable.CVE-2026-6374 · Network & remote access · Zyxel Networks · reported by iletisim@usom.gov.trHigh 7.3
Use of Hard-coded Credentials vulnerability in Zyxel Networks WAH7601 allows Read Sensitive Constants Within an Executable. This issue affects WAH7601: through 20.07.2026.
- Product
- WAH7601
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026Exposure of sensitive system information to an unauthorized control sphere vulnerability in Zyxel Networks WAH7601 allows Web Application Fingerprinting.CVE-2026-6373 · Network & remote access · Zyxel Networks · reported by iletisim@usom.gov.trMedium 6.5
Exposure of sensitive system information to an unauthorized control sphere vulnerability in Zyxel Networks WAH7601 allows Web Application Fingerprinting. This issue affects WAH7601: through 20072026.
- Product
- WAH7601
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock When a netlink socket tCVE-2026-68408 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock When a netlink socket that owns a PMSR session is closed, cfg80211_release_pmsr() clears the request's nl_portid and queues pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously. If the interface tears down concurrently, cfg80211_pmsr_wdev_down() is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk) to wait for any running work. The work function acquires wiphy_lock via guard(wiphy) before calling process_abort. This is a deadlock: wdev_down holds wiphy_lock and blocks inside cancel_work_sync(); pmsr_free_wk blocks trying to acquire that same wiphy_lock. Neither thread can proceed. The same deadlock is reachable from cfg80211_leave_locked(), which calls cfg80211_pmsr_wdev_down() for all interface types under wiphy_lock. Fix this by converting pmsr_free_wk from a plain work_struct to a wiphy_work. The wiphy_work dispatcher holds wiphy_lock when running work items, so the explicit guard(wiphy) in the work function is no longer needed. wiphy_work_cancel() can be called safely while holding wiphy_lock - since wiphy_lock
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: use wiphy work for socket owner autodisconnect nl80211_netlink_notify() waCVE-2026-68404 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: use wiphy work for socket owner autodisconnect nl80211_netlink_notify() walks the cfg80211 wireless device list when a NETLINK_GENERIC socket is released. If the socket owns a connection, the notifier queues the embedded wdev->disconnect_wk work item. That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a NETLINK_URELEASE notifier that already observed conn_owner_nlportid can queue it after that cancel returns. _cfg80211_unregister_wdev() then removes the wdev from the list and waits for RCU readers, but synchronize_net() does not drain work queued by such a reader. Make the autodisconnect work a wiphy_work instead. The callback already needs the wiphy mutex, and wiphy_work runs under that mutex. This lets teardown cancel pending autodisconnect work while holding the mutex, without a cancel_work_sync() vs. worker locking concern. Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any NETLINK_URELEASE notifier that had already reached the wdev list has then either queued the work and it is removed, or can no longer find the wdev.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net/iucv: take a reference on the socket found in afiucv_hs_rcv() afiucv_hs_rcv() looks upCVE-2026-68397 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: net/iucv: take a reference on the socket found in afiucv_hs_rcv() afiucv_hs_rcv() looks up the destination socket under iucv_sk_list.lock, drops the lock, and then passes the socket to the afiucv_hs_callback_*() handlers without holding a reference. AF_IUCV sockets are not RCU-protected and are freed synchronously by iucv_sock_kill() -> sock_put(), so a concurrent close can free the socket in the window between read_unlock() and the handler, which then dereferences freed memory (for example sk->sk_data_ready() in afiucv_hs_callback_syn()). Take a reference with sock_hold() while the socket is still on the list and release it with sock_put() once the handler has run.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: act_tunnel_key: Defer dst_release to RCU callback Fix a race-condition use-afteCVE-2026-68377 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net/sched: act_tunnel_key: Defer dst_release to RCU callback Fix a race-condition use-after-free in tunnel_key_release_params(). The function releases the metadata_dst of the old params synchronously via dst_release() while deferring the params struct free with kfree_rcu(). A concurrent tunnel_key_act() reader on the datapath may still hold the old params pointer (under rcu_read_lock_bh) and proceed to call dst_clone(¶ms->tcft_enc_metadata->dst) after the writer's dst_release has already pushed the dst's rcuref to RCUREF_DEAD. zdi-disclosures@trendmicro.com produced a poc which i (and Victor) verified that KASAN reports: ================================================================== BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 BUG: KASAN: slab-use-after-free in atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326 BUG: KASAN: slab-use-after-free in __rcuref_put include/linux/rcuref.h:109 BUG: KASAN: slab-use-after-free in rcuref_put include/linux/rcuref.h:173 BUG: KASAN: slab-use-after-free in dst_release+0x5b/0x370 net/core/dst.c:1
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: firewire: net: Fix fragmented datagram reassembly fwnet_frag_new() keeps a sorted list of CVE-2026-68354 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: firewire: net: Fix fragmented datagram reassembly fwnet_frag_new() keeps a sorted list of received fragments for a partial datagram. When a new fragment is adjacent to an existing fragment, the code checks whether the new fragment also closes the gap to the next or previous list entry. Those neighbor lookups currently assume that the current fragment always has a real next or previous fragment. At a list edge, the next or previous entry is the list head, not a struct fwnet_fragment_info. The gap checks also compare against the old edge of the current fragment instead of the edge after adding the new fragment. As a result, a fragment that bridges two existing ranges may leave two adjacent ranges unmerged, so fwnet_pd_is_complete() can miss a complete datagram. Check for the list head before looking up the neighboring fragment, and compare the neighbor against the new fragment's far edge when deciding whether to merge all three ranges. This issue was found by a static analysis checker and confirmed by manual source review.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net/packet: avoid fanout hook re-registration after unregister packet_set_ring() temporariCVE-2026-68338 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net/packet: avoid fanout hook re-registration after unregister packet_set_ring() temporarily detaches a socket from packet delivery while reconfiguring its ring. It records the previous running state, clears po->num, unregisters the protocol hook when needed, drops po->bind_lock, and later restores po->num and re-registers the hook from the saved was_running value. That unlocked window can race with NETDEV_UNREGISTER. The notifier can observe the socket as not running, skip __unregister_prot_hook(), and invalidate the per-socket binding by setting po->ifindex to -1 and clearing po->prot_hook.dev. A one-member fanout group can still retain its shared fanout hook device pointer. When packet_set_ring() resumes, re-registering solely from the stale was_running state can re-add the fanout hook after the device has been unregistered. Treat po->ifindex == -1 as an invalidated binding after reacquiring po->bind_lock. This is distinct from ifindex 0, the normal unbound/wildcard state: ifindex -1 marks an existing device binding that was invalidated when the device was unregistered. Restore po->num as before, but do not
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reject redirect helpers without a bpf_net_context The bpf_redirect*() helpers and skbCVE-2026-68337 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: bpf: Reject redirect helpers without a bpf_net_context The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the current->bpf_net_context unconditionally. That context is established on the paths that run tc BPF such as sch_handle_{ingress,egress}(), *except* for the case where {cls,act}_bpf was attached to a proper qdisc. A program running from there reaches the NULL deref in two ways: * It calls bpf_redirect() directly, which dereferences the context at the top of the helper: tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \ avpkt 1000 burst 100 qevent early_drop block 10 tc filter add block 10 pref 1 bpf obj redirect.o * It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle() then dispatches to skb_do_redirect(), which dereferences the context Rather than extending bpf_net_context management into the qdisc path, make the redirect helpers refuse to operate when no context exists, and have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of calling skb_do_redi
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: rds: drop incoming messages that cross network namespace boundaries rds_find_bound() looksCVE-2026-68335 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: rds: drop incoming messages that cross network namespace boundaries rds_find_bound() looks up the destination socket using a global rhashtable keyed solely on (addr, port, scope_id). Network namespaces are not part of the key, so a sender in netns A can deliver an incoming message (inc) to a socket that lives in a different netns B. When this happens, inc->i_conn points to an rds_connection whose c_net is netns A, but the receiving rs lives in netns B. Once the child process that created netns A exits, cleanup_net() calls rds_loop_exit_net() -> rds_loop_kill_conns() -> rds_conn_destroy(), freeing that connection. If the survivor socket in netns B still holds the inc, any subsequent dereference of inc->i_conn is a use-after-free. There are two dangerous sites in rds_clear_recv_queue(): 1. inc->i_conn->c_lcong (offset 88 of freed rds_connection, size 200) read via rds_recv_rcvbuf_delta() -- confirmed by KASAN. 2. inc->i_conn->c_trans->inc_free(inc) (function pointer at offset 80) called via rds_inc_put() when the inc refcount reaches zero -- same race window, potential call-through-freed-obj
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix potential use-after-free in airoha_ppe_deinit() airoha_ppe_deinit() replaCVE-2026-68332 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix potential use-after-free in airoha_ppe_deinit() airoha_ppe_deinit() replaces the NPU pointer with NULL via rcu_replace_pointer() but does not wait for existing RCU readers to exit before calling ppe_deinit() and airoha_npu_put(). This can cause a use-after-free if a reader in an RCU read-side critical section still holds a reference to the NPU when it is freed. The init path (airoha_ppe_init) already calls synchronize_rcu() after rcu_assign_pointer(), but the deinit path introduced in commit 6abcf751bc08 ("net: airoha: Fix schedule while atomic in airoha_ppe_deinit()") omitted the matching barrier when switching from rcu_read_lock()/rcu_dereference() to rcu_replace_pointer(). Add synchronize_rcu() before ppe_deinit() to ensure all existing RCU readers have completed before the NPU resources are released.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix DMA direction for NPU mailbox buffer airoha_npu_send_msg() always maps thCVE-2026-68330 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix DMA direction for NPU mailbox buffer airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE, but some callers expect the NPU to write response data back into the same buffer: - airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into the buffer, then the caller reads it via memcpy() - airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back npu_stats_addr field in the response On non-cache-coherent architectures like EN7581 (Cortex-A53 without hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op — it does not invalidate the CPU cache. If the NPU-written cache line is still present in the CPU cache when the caller reads the buffer, the CPU observes stale data instead of the NPU response. This is a timing-sensitive bug: small mailbox buffers (~24 bytes) typically fit in a single cache line and may survive in the cache until the caller reads them, producing silent data corruption rather than a crash. The bug is more likely to trigger when the caller reads the response immediately after dma_unmap_single() without intervening cache-evicting operations
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: rds: Fix inet6_addr_lst NULL dereference when IPv6 is disabled When booting with the 'ipv6CVE-2026-68322 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: rds: Fix inet6_addr_lst NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, inet6_addr_lst is never initialized because inet6_init() exits before addrconf_init() is called to initialize it. An attempt to bind an RDS socket to an ipv6 address results in a crash in __ipv6_chk_addr_and_flags() KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:__ipv6_chk_addr_and_flags+0x1df/0x7e0 Call Trace: <TASK> ipv6_chk_addr+0x3b/0x50 rds_tcp_laddr_check+0x155/0x3b0 [rds_tcp] rds_trans_get_preferred+0x15d/0x2d0 [rds] ? trace_hardirqs_on+0x2d/0x110 rds_bind+0x1433/0x1d60 [rds] ? rds_remove_bound+0xd50/0xd50 [rds] ? aa_af_perm+0x250/0x250 ? __might_fault+0xde/0x190 ? __sys_bind+0x1dc/0x210 __sys_bind+0x1dc/0x210 ? __ia32_sys_socketpair+0x100/0x100 ? restore_fpregs_from_fpstate+0x53/0x100 __x64_sys_bind+0x73/0xb0 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f47f8269ea9 </TASK> The following code reproduces the issue: struct sockaddr_in6 addr; s = socket(PF_RDS, SOCK_SEQPA
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix FDIR filter leak on remove Perfect FDIR filters can be added while the intCVE-2026-68321 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix FDIR filter leak on remove Perfect FDIR filters can be added while the interface is down and are kept on the software list for later restore. unregister_netdev() only calls ndo_stop when the device is up, so txgbe_fdir_filter_exit() in txgbe_close() is skipped in that case and the filters are leaked on driver remove. Free the filter list from txgbe_remove() as well.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net: mctp i3c: clean up notifier and buses if driver register fails mctp_i3c_mod_init() reCVE-2026-68314 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net: mctp i3c: clean up notifier and buses if driver register fails mctp_i3c_mod_init() registers the I3C bus notifier and then walks the existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL) before registering the I3C device driver. If i3c_driver_register() fails, the function returns the error directly, leaving the notifier registered and every mctp_i3c_bus object created for the existing buses allocated. The notifier is left pointing into the module that failed to load and the bus list is leaked. Mirror the module exit path on this failure: unregister the notifier and tear down the buses that were added before returning the error. This issue was identified during our ongoing static-analysis research while reviewing kernel code.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix memory leak on slave unregistration by removing synced VLANs When an HSR masCVE-2026-68301 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix memory leak on slave unregistration by removing synced VLANs When an HSR master device is brought UP, it auto-adds VLAN 0 via vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B). If a slave device is later unregistered while HSR is active (e.g., during netns cleanup or interface destruction), hsr_del_port() is called to detach the slave port from the HSR master. However, hsr_del_port() currently does not delete the VLAN IDs that were synced to the slave device by HSR. As a result, the slave device retains a refcount on VID 0 (and any other synced VLANs). When the slave device is destroyed, its vlan_info / vlan_vid_info structure remains allocated, leading to a memory leak. Fix this by calling vlan_vids_del_by_dev(port->dev, master->dev) in hsr_del_port() before unlinking slave A or slave B ports, matching the propagation logic in hsr_ndo_vlan_rx_add_vid() / hsr_ndo_vlan_rx_kill_vid() and the cleanup behavior in bonding and team drivers.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets vmxnet3_get_hdr_len() assuCVE-2026-68299 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the outer header, but for a Geneve-encapsulated packet the device can set them based on the inner header instead, signalled by the VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the function never skips the outer encapsulation, this mismatch triggers: - BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer protocol is UDP (Geneve), not TCP. - BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa). Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the function cannot locate the inner header it would need to parse. Also convert the remaining BUG_ON()s in this function to return 0 defensively.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net: gre: fix lltx regression for GRE tunnels with SEQ/CSUM Before commit 00d066a4d4ed ("nCVE-2026-68296 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: gre: fix lltx regression for GRE tunnels with SEQ/CSUM Before commit 00d066a4d4ed ("netdev_features: convert NETIF_F_LLTX to dev->lltx"), NETIF_F_LLTX was set unconditionally in both __gre_tunnel_init() and ip6gre_tnl_init_features() alongside GRE_FEATURES: dev->features |= GRE_FEATURES | NETIF_F_LLTX; When that commit converted NETIF_F_LLTX to the dev->lltx flag, it placed 'dev->lltx = true' after the SEQ/CSUM early returns instead of before them. This causes GRE/GRETAP/ip6gre tunnels with SEQ or CSUM+encap to lose lockless TX, reintroducing _xmit_lock acquisition around their ndo_start_xmit. Since GRE xmit re-enters the stack via ip_tunnel_xmit(), holding _xmit_lock risks ABBA deadlock with the underlay device. CPU0 CPU1 ---- ---- lock(&qdisc_xmit_lock_key#6); lock(&qdisc_xmit_lock_key#3); lock(&qdisc_xmit_lock_key#6); lock(&qdisc_xmit_lock_key#3); Fix by moving dev->lltx = true before the early returns in both functions, restoring the original unconditional behavior.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net: qrtr: restrict socket creation to the initial network namespace QRTR keeps its entireCVE-2026-68294 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: net: qrtr: restrict socket creation to the initial network namespace QRTR keeps its entire port and node state in module-global variables that are not partitioned per network namespace: qrtr_local_nid is a single global node id (always 1) and qrtr_ports is a single global xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that global state with no network-namespace check, and qrtr_create() places no restriction on the namespace a socket is created in. As a result an unprivileged process that creates an AF_QIPCRTR socket in a separate network namespace, e.g. via unshare(CLONE_NEWUSER | CLONE_NEWNET), can send QRTR datagrams - including control-plane messages such as QRTR_TYPE_NEW_SERVER - to QRTR sockets owned by another namespace, and vice versa. The receiving socket sees such a message as coming from node id 1, indistinguishable from a legitimate local client, breaking the isolation that network namespaces are expected to provide. QRTR is a transport to global hardware endpoints (the modem and other remote processors) and has no per-namespace semantics; its in-kernel name service already creates it
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix MCIA register buffer overflow on 32 dword reads The MCIA register can returnCVE-2026-68293 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix MCIA register buffer overflow on 32 dword reads The MCIA register can return up to 32 dwords (128 bytes) when the device advertises the mcia_32dwords capability, but struct mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just 12 dwords (48 bytes) of data. mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then memcpy()s that many bytes out of the register, potentially reading past the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this is caught as a buffer overflow while reading the module EEPROM via ethtool: detected buffer overflow in memcpy kernel BUG at lib/string_helpers.c:1048! RIP: 0010:fortify_panic+0x13/0x20 Call Trace: mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core] mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core] mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core] eeprom_prepare_data+0xf3/0x170 ethnl_default_doit+0xf1/0x3b0 Extend the mcia_reg layout to 32 dwords.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: rds: tcp: unregister sysctl before tearing down listen socket rds_tcp_exit_net() frees theCVE-2026-68290 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: rds: tcp: unregister sysctl before tearing down listen socket rds_tcp_exit_net() frees the per-netns RDS TCP listen socket via rds_tcp_kill_sock() before unregistering the per-netns sysctl table. Since rds_tcp_skbuf_handler() derives the netns from rtn->rds_tcp_listen_sock->sk, a concurrent sysctl write can race with netns teardown and dereference the freed socket/sk. KASAN reports the race as: BUG: KASAN: slab-use-after-free in rds_tcp_skbuf_handler+0x2aa/0x2e0 rds_tcp_skbuf_handler net/rds/tcp.c:721 proc_sys_call_handler fs/proc/proc_sysctl.c vfs_write fs/read_write.c __x64_sys_pwrite64 fs/read_write.c Fix this by unregistering the RDS TCP sysctl table before calling rds_tcp_kill_sock(). unregister_net_sysctl_table() prevents new sysctl handlers from starting and waits for in-flight handlers to finish, so the listen socket can then be released safely. The fix was tested against the linked reproducer.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD net_dm_packet_report_fill() and neCVE-2026-68288 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() open code the NET_DM_ATTR_PAYLOAD attribute to avoid zeroing the packet payload before overwriting it with skb_copy_bits(). skb_put() reserves nla_total_size(payload_len), i.e. the header plus the NLA_ALIGN() padding, but only payload_len bytes are copied in. When payload_len is not a multiple of 4 the 1-3 padding bytes are never initialized and are leaked to user space inside the netlink message. KMSAN confirms the leak for the software path when the packet payload length is not 4-byte aligned: BUG: KMSAN: kernel-infoleak in _copy_to_iter _copy_to_iter __skb_datagram_iter skb_copy_datagram_iter netlink_recvmsg sock_recvmsg __sys_recvfrom Uninit was created at: kmem_cache_alloc_node_noprof __alloc_skb net_dm_packet_work Bytes 173-175 of 176 are uninitialized Use __nla_reserve(), which sets up the attribute header and zeroes the padding, instead of open coding the attribute construction.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix size calculations for 64-bit attributes net_dm_packet_report_fill() and CVE-2026-68287 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix size calculations for 64-bit attributes net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and NET_DM_ATTR_TIMESTAMP). On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for 64-bit alignment. However, net_dm_packet_report_size() and net_dm_hw_packet_report_size() used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)), budgeting 12 bytes instead of up to 16 bytes. This under-estimation of SKB size can lead to an skb_over_panic() when __nla_reserve() or skb_put() is subsequently called. Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: drop_monitor: perform u64_stats updates under IRQ-disabled section In net_dm_packet_trace_CVE-2026-68286 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drop_monitor: perform u64_stats updates under IRQ-disabled section In net_dm_packet_trace_kfree_skb_hit() and net_dm_hw_trap_packet_probe(), u64_stats_update_begin() / u64_stats_inc() / u64_stats_update_end() were called after spin_unlock_irqrestore(&...drop_queue.lock, flags), when local IRQs had already been re-enabled. Tracepoint probes can execute in IRQ or softirq context. On 32-bit architectures, u64_stats_update_begin() disables preemption but not interrupts, relying on seqcount writes. If a nested interrupt occurs on the same CPU during the 64-bit stats update, the reentrant seqcount update can corrupt the seqcount state or stats value. Fix this by performing the 64-bit per-CPU stats update before releasing drop_queue.lock via spin_unlock_irqrestore(), ensuring local interrupts remain disabled during the u64_stats update.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: avoid auth_enable sysctl UAF during netns teardown proc_sctp_do_auth() updates the SCVE-2026-68162 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: sctp: avoid auth_enable sysctl UAF during netns teardown proc_sctp_do_auth() updates the SCTP control socket after changing net.sctp.auth_enable. The handler gets the per-net SCTP state from ctl->data, so an already opened sysctl file can still target a network namespace while that namespace is being torn down. SCTP previously registered its per-net sysctls from sctp_defaults_init(), while the control socket is created later from sctp_ctrlsock_init(). This exposed a window during initialization where auth_enable was writable before net->sctp.ctl_sock existed, and a teardown window where auth_enable stayed writable after inet_ctl_sock_destroy() had released the control socket. Move the per-net SCTP sysctl registration into sctp_ctrlsock_init() after sctp_ctl_sock_init() succeeds, and unregister the sysctl table before destroying the control socket in sctp_ctrlsock_exit(). If sysctl registration fails after the control socket was created, destroy the control socket in the same init path. Make sctp_sysctl_net_unregister() tolerate a missing header and clear the saved pointer so init-error and exit paths can safel
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-neCVE-2026-68161 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8
In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when net.sctp.udp_port is set, and stops/restarts them when the sysctl value changes. The netns exit path does not stop these sockets, so a namespace can be torn down while its SCTP UDP tunnel sockets are still installed. Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering the per-net sysctl table. This prevents new sysctl writes from racing in while the sockets are being released, and closes the sockets before the control socket is destroyed.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: phonet: pep: fix use-after-free in pep_get_sb() pep_get_sb() doesn't consider that pskb_maCVE-2026-68144 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8
In the Linux kernel, the following vulnerability has been resolved: phonet: pep: fix use-after-free in pep_get_sb() pep_get_sb() doesn't consider that pskb_may_pull() might have relocated the skb data, and continue to access the older pointer, causing UAF. Reproduced under KASAN: BUG: KASAN: slab-use-after-free in pep_get_sb+0x234/0x3b0 Read of size 1 at addr ff11000105510f50 by task repro/157 pep_get_sb+0x234/0x3b0 pipe_handler_do_rcv+0x5f7/0xa10 pep_do_rcv+0x203/0x410 __sk_receive_skb+0x471/0x4a0 phonet_rcv+0x5b3/0x6c0 __netif_receive_skb+0xcc/0x1d0 Refetch the header with skb_header_pointer() after pskb_may_pull(), so the possibly stale pointer is no longer dereferenced. There are better ways to solve this, but, this is the less instrusive one.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net: slip: serialize receive against buffer reallocation sl_realloc_bufs() replaces rbuff CVE-2026-68143 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net: slip: serialize receive against buffer reallocation sl_realloc_bufs() replaces rbuff and updates buffsize while holding sl->lock. slip_receive_buf() reads those fields and writes through rbuff without holding the lock. An MTU change can therefore race with receive processing. An MTU shrink can expose the new smaller rbuff with the old larger bound, causing an out-of-bounds write. A receive callback which already loaded the old rbuff can instead continue writing after that buffer has been freed. Serialize receive processing with sl_realloc_bufs() by holding sl->lock while consuming each receive batch.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.