Vulnerability database

3,308 results · page 6 of 67

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_debugfs: Unregister panic notifier cros_ec_debugfs_probe() registCVE-2026-90404 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_debugfs: Unregister panic notifier cros_ec_debugfs_probe() registers notifier_panic with the EC panic notifier chain. The remove path tears down debugfs and the console log, but leaves the notifier registered. A later panic notification can call back into the removed instance and queue work that accesses released data. Unregister the panic notifier before tearing down the debugfs and console log state. This issue was found by a static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Fix controller cleanup on EDL sysfs failure mhi_register_controller() addsCVE-2026-90402 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: bus: mhi: host: Fix controller cleanup on EDL sysfs failure mhi_register_controller() adds the controller device before creating the optional trigger_edl sysfs file. If sysfs_create_file() fails, the error path only drops the device reference and leaves the device registered. Hence, call device_del() in the error path before put_device().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: cancel reset and rc work on device unregister Both drivers cancelled dump_workCVE-2026-90365 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: cancel reset and rc work on device unregister Both drivers cancelled dump_work on unregister but left reset_work and rc_work to be flushed only by destroy_workqueue() in mt76_free_device(), which runs after the hw is unregistered and the hardware stopped. A reset_work that fires in that window calls ieee80211_restart_hw() and re-arms mac_work on an unregistered hw, and rc_work touches station state being torn down. Cancel both up front, alongside dump_work.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Unregister cpufreq notifier on init failure acpi_processor_driver_init() CVE-2026-90364 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Unregister cpufreq notifier on init failure acpi_processor_driver_init() registers the cpufreq policy notifier before registering the ACPI processor driver and setting up CPU hotplug state. If driver_register() or cpuhp_setup_state() fails, the error path only unregisters the ACPI processor driver and the idle driver. The cpufreq notifier remains registered even though initialization failed. Mirror the module exit path on the init failure path and unregister the cpufreq notifier when it has been registered.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix ext PHY use-after-free on register error path After mt7915_registeCVE-2026-90353 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix ext PHY use-after-free on register error path After mt7915_register_ext_phy() succeeded, a failure of the main PHY mt7915_init_debugfs() or mt7915_coredump_register() unwound through free_phy2, which called ieee80211_free_hw() on the ext PHY hw while it was still registered with mac80211, since mt76_unregister_device() only unregisters the main hw. Unregister the ext PHY (thermal + phy + hw) first and skip the redundant free.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: serial: core: do fallible allocations before the console can be registered serial_core_addCVE-2026-90337 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: serial: core: do fallible allocations before the console can be registered serial_core_add_one_port() allocates uport->tty_groups after uart_configure_port(), which may register the console. If the allocation fails, the driver unwinds the port while its console remains registered. The earlier uport->name allocation has a related failure path that leaves state->uart_port linked to a port being freed. Failslab reproduced a NULL dereference in PL011 console output and a KASAN use-after-free in i.MX console output after failed binds. Allocate the name and tty_groups before linking the port and configuring it. Reserve space for the optional driver attribute group because config_port() may populate uport->attr_group during configuration.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: serial: core: clear freed pointers on uart_register_driver() failure uart_register_driver(CVE-2026-90336 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: serial: core: clear freed pointers on uart_register_driver() failure uart_register_driver() leaves drv->state pointing to freed memory when tty_alloc_driver() fails. If tty_register_driver() fails, drv->tty_driver also retains a pointer after its reference is dropped. Drivers that use drv->state as an "already registered" flag can then skip registration on the next probe and pass the freed state to uart_add_one_port(). This issue was found with failslab on QEMU's raspi1ap board by failing registration and binding the PL011 port again. Clear both pointers on their failure paths, as uart_unregister_driver() already does.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: tty: skip cdev_del() when no cdev is registered TTY device registration can fail before a CVE-2026-90335 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tty: skip cdev_del() when no cdev is registered TTY device registration can fail before a cdev is allocated. Serial core keeps the port so setserial can still use it, and later removal passes the NULL cdev slot to cdev_del(), causing a NULL-pointer dereference. Only delete the cdev when the slot is not NULL.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/omap: dsi: Do not copy isr table To be able to unregister stuff from isrs, the correspCVE-2026-90316 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: drm/omap: dsi: Do not copy isr table To be able to unregister stuff from isrs, the corresponding table was copied. Nobody seems to unregister stuff that way, so it does not help. But there are stack-allocated objects passed to these isrs giving chances of UAF of these objects if irqs are unregistered while they are handled, so better do not copy that table.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: IB/isert: delay the final Login Response until the session is registered isert_put_login_tCVE-2026-90294 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: IB/isert: delay the final Login Response until the session is registered isert_put_login_tx() puts the final Login Response on the wire before __transport_register_session(), which iscsi_post_login_handler() reaches only after iscsi_target_do_login() returns. An initiator that issues a SCSI command as soon as it sees that response can have it executed against an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses on the NULL dereference. Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 0 UID: 0 PID: 178 Comm: kworker/0:1H Not tainted 7.2.0-rc5-V2CTL-gf5098b6bae76 #10 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ib-comp-wq ib_cq_poll_work RIP: 0010:target_submit+0xbe/0x390 Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 89 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d 7c 24 78 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5a 02 00 00 48 8d 7b 78 4d 8b 6c

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: IB/isert: post the full-feature receive buffers after session registration isert_put_loginCVE-2026-90293 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: IB/isert: post the full-feature receive buffers after session registration isert_put_login_tx() posts the full-feature receive buffers before __transport_register_session() runs, so an initiator that does not wait for the final Login Response can still have a SCSI command executed against an se_session whose se_tpg is NULL - the same oops as the previous patch, at target_submit+0xbe. Post them from isert_get_rx_pdu(), which the previous patch already uses to send that response, and post them before that send: the receive queue is filled at the moment the initiator is told it may use it. Allocating there keeps the existing property that a memory allocation failure cannot happen once the final Login Response is on the wire. The receive queue is already empty between the final Login Request and isert_post_recvm(); this moves the second point later, from a median of 92 us to 172 us over 1200 logins. Only an initiator that sends before it has been told to can reach that window, and on IB and RoCE its send is retried there until the buffers appear - isert_rdma_accept() asks for rnr_retry_count = 7. iWARP has no RN

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Free debugfs on registration failure c4iw_alloc() creates the per-device debugCVE-2026-90219 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Free debugfs on registration failure c4iw_alloc() creates the per-device debugfs tree (dev->debugfs_root via setup_debugfs()), but it is removed only in c4iw_remove(), not in c4iw_dealloc(). When RDMA device registration fails, the registration worker's err_dealloc_ctx path calls c4iw_dealloc() directly, bypassing c4iw_remove(), so the debugfs dentries leak and outlive the freed c4iw_dev. Move debugfs_remove_recursive() into c4iw_dealloc() so every path that frees ctx->dev also removes its debugfs tree.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Clear fetch destination on faulting arena atomic Same missing register clear asCVE-2026-90211 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Clear fetch destination on faulting arena atomic Same missing register clear as on riscv64. A RMW atomic on an arena pointer is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but bpf_jit_probe_atomic_pre() only fills in the arena base and the probe offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads back as "there is nothing to clear". That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory, but an RMW carrying BPF_FETCH also reads the old value into a register: src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and r0 for BPF_CMPXCHG. So on a fault over an unmapped arena page the program resumes at the landing pad with whatever that register held before the atomic instead of the 0 that every other BPF_PROBE_* access delivers. Fill probe->reg in from bpf_atomic_load_reg(). Unlike x86-64 and arm64, s390x does not report arena violations from its exception handler, so there is no access direction to correct here, only the missing register clear.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix deadlock during unregister Unregistering an s390dbf debug area while one oCVE-2026-90209 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix deadlock during unregister Unregistering an s390dbf debug area while one of the associated debugfs files is being written to can cause a deadlock: $ echo >.../vmur/level $ rmmod vmur =================================================== debugfs write debugfs_file_get() debug_unregister() mutex_lock(debug_mutex) debugfs_remove() wait for debugfs_file_put() debug_file_ops.write() debug_input() mutex_lock(debug_mutex) ==> DEADLOCK Fix this by splitting debug_unregister() into an s390dbf and debugfs part, and running only the s390dbf part with debug_mutex locked.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: null_blk: register configfs subsystem after creating default devices In null_init(), confiCVE-2026-90189 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: null_blk: register configfs subsystem after creating default devices In null_init(), configfs_register_subsystem() currently runs before register_blkdev(), so when null_blk is built as a module, a racing mkdir() + poweron from userspace can reach null_add_dev() while null_major is still 0. __add_disk() then hits WARN_ON(disk->minors) (major=0 with minors!=0) and fails: [root@fedora ~]# [ 2366.521436] WARNING: block/genhd.c:476 at __add_disk+0x8a7/0xde0, [ 2366.523552] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib [ 2366.529081] CPU: 26 UID: 0 PID: 1600 Comm: sh Not tainted 7.2.0-rc1+ #66 PREEMPT(full) ...... [ 2366.547251] Call Trace: [ 2366.547575] <TASK> [ 2366.547831] ? _raw_spin_lock+0x84/0xe0 [ 2366.548260] add_disk_fwnode+0x114/0x560 [ 2366.548739] null_add_dev+0x102d/0x1b80 [null_blk] [ 2366.549310] ? __pfx_null_add_dev+0x10/0x10 [null_blk] [ 2366.549906] ? mutex_lock+0xde/0x1c0 [ 2366.550361] ? __pfx_mutex_lock+0x10/0x10 [ 2366.550827] nullb_device_power_store+0x1e7/0x280 [null_blk] [ 2366.551499] ? __pfx_nullb_device_power_store+0x10/0x10 [null_blk] [ 2366.552177

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: m68k: nfcon: Do not call console_is_registered() in nfcon_device() Since 7c2af0f634f1 ("ttCVE-2026-90158 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: m68k: nfcon: Do not call console_is_registered() in nfcon_device() Since 7c2af0f634f1 ("tty: tty_io: use console_list_lock for list synchronization") show_cons_active() calls the .device() method under the console_list_lock, but console_is_registered() tries to acquire console_list_lock as well, causing a deadlock. It should not be necessary to check console_is_registered() here since the function should not be called in the fist place when the console is not registered.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2CVE-2026-90156 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: smb/server: fix session leak in ksmbd_session_register() See the procedure below: smb2_CVE-2026-90152 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: smb/server: fix session leak in ksmbd_session_register() See the procedure below: smb2_sess_setup ksmbd_smb2_session_create __session_create atomic_set(&sess->refcnt, 2) hash_add(sessions_table, &sess->hlist, sess->id) ksmbd_session_register xa_store(&conn->sessions, sess->id, sess) // fail ksmbd_user_session_put atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed Remove the session from sessions_table and drop its table reference if xa_store() fails.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers thCVE-2026-90126 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers the CLKOUT clock provider with of_clk_add_provider(), but nothing ever unwinds it: there is no of_clk_del_provider() call and the driver has no remove callback. Each of_clk_add_provider() allocates a struct of_clk_provider, takes a reference on the OF node and adds an entry to the global of_clk_providers list, none of which is released when the device is unbound. Every bind/unbind (or module reload) therefore leaks a provider structure and an of_node reference. The clock itself is already device-managed (devm_clk_register()); only the provider registration was not. Use devm_of_clk_add_hw_provider() so the provider is removed automatically on unbind. Tie it to the parent i2c device, whose OF node carries the #clock-cells and clock-output-names properties (the RTC class device has no OF node of its own).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026vm2 versions 3.11.4 through 3.11.6 incompletely filter Node.js registered internal symbols across the sandbox boundary.CVE-2026-92952 · Other software · patriksimek · reported by VulnCheckHigh 8.9

  vm2 versions 3.11.4 through 3.11.6 incompletely filter Node.js registered internal symbols across the sandbox boundary. The extraction filters in lib/setup-sandbox.js and the cross-realm symbol checks and write traps in lib/bridge.js use a fixed list of known dangerous registered symbols that omits nodejs.stream.disturbed and nodejs.stream.errored, which are exposed on host WebStream prototypes on newer Node.js releases (validated on Node.js v25.8.0). When the embedder exposes a host WebStream object and the host stream/web module to the sandbox, sandbox code can obtain the real host symbols via Object.getOwnPropertySymbols(streamWeb.ReadableStream.prototype) and use them as write keys on host stream objects, corrupting host-visible stream state — for example making stream.Readable.isDisturbed() return false for an already-consumed stream. This can bypass host logic that relies on Node's public stream-state helpers to enforce one-shot body consumption, reject errored streams, or decide whether a stream is safe to hand to another component. It is not a host code-execution primitive in the reported proof of vulnerability. This is an incomplete fix for the earlier nodejs.* symbol filt

  Product

  vm2

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Sep 17, 2026Unauthenticated Broken Access Control in User Registration <= 5.2.7 versions.CVE-2026-74017 · WordPress plugins & themes · reported by PatchstackMedium 5.3

  Unauthenticated Broken Access Control in User Registration <= 5.2.7 versions.

  Affected

  up to 5.2.7

  What to do

  Affects up to 5.2.7. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordpatchstack.com

• Sep 17, 2026Choose User Role at Registration: Does not validate the role requested at registration against the roles an administrator chose to offerCVE-2026-85128 · WordPress plugins & themes · reported by WPScanHigh 7.5

  The Choose User Role at Registration WordPress plugin before 1.3.3 does not validate the role requested at registration against the roles an administrator chose to offer, allowing unauthenticated users to request any role, including administrator, and to be granted it once the request is approved. Exploitation requires the Choose User Role at Registration WordPress plugin before 1.3.3's role selection feature and public account registration to both be enabled.

  Product

  Choose User Role at Registration

  Fixed in

  1.3.3

  What to do

  Update Choose User Role at Registration to 1.3.3 or newer.

  Full record and what to do →NVD recordwpscan.com

• Sep 16, 2026A remote attacker who controls a container registry may be able to direct a client's token request to a host of the attacker's choice, and disclose the victim'sCVE-2026-65388 · Computers, phones & browsers · Apple · reported by product-security@apple.comHigh 7.5

  A remote attacker who controls a container registry may be able to direct a client's token request to a host of the attacker's choice, and disclose the victim's registry credentials to that host. This vulnerability is addressed in containerization version 0.41.0.

  Product

  containerization

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.com

• Sep 16, 2026Coze Studio through 0.5.1 fails to restrict the server URL supplied when registering plugin tools, allowing authenticated users to make the backend fetch internCVE-2026-92795 · Other software · coze-dev · reported by VulnCheckHigh 7.1

  Coze Studio through 0.5.1 fails to restrict the server URL supplied when registering plugin tools, allowing authenticated users to make the backend fetch internal services. Attackers can construct plugin requests to access cloud metadata endpoints and internal services reachable only from the backend network, reading responses containing sensitive information.

  Product

  coze-studio

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 16, 2026Angel through 3.3.0 deserializes untrusted setAlgoMetrics payload using Kryo without class registration or allowlist validation.CVE-2026-92785 · Other software · Angel-ML · reported by VulnCheckCritical 9.2

  Angel through 3.3.0 deserializes untrusted setAlgoMetrics payload using Kryo without class registration or allowlist validation. Unauthenticated network attackers can instantiate arbitrary classes or exhaust coordinator memory by sending crafted serialized objects to the master RPC endpoint.

  Product

  angel

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 16, 2026Harbor through 2.15.2 fails to properly restrict the q query parameter filtering on scanner registration access credentials.CVE-2026-92770 · Other software · goharbor · reported by VulnCheckHigh 7.1

  Harbor through 2.15.2 fails to properly restrict the q query parameter filtering on scanner registration access credentials. Project administrators can exploit fuzzy filtering on the AccessCredential column to recover the scanner adapter secret one character at a time through response row counts.

  Product

  harbor

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 16, 2026Apache NiFi Registry 0.4.0 through 2.11.0 are subject to path manipulation when storing extension bundle content using group, artifact, and version coordinates CVE-2026-87976 · Websites & servers · Apache Software Foundation · reported by security@apache.orgHigh 7.2

  Apache NiFi Registry 0.4.0 through 2.11.0 are subject to path manipulation when storing extension bundle content using group, artifact, and version coordinates from uploaded NAR manifests. The default file persistence provider used coordinates as filesystem path components without rejected parent-directory names, and the path-containment check compared an unnormalized resolved path. An authenticated user authorized to write and delete bundles in a bucket can upload a NAR with a crafted manifest resulting in file system operations outside of the file persistence directory. Upgrading to Apache NiFi Registry 2.12.0 is the recommended mitigation, which rejects parent-directory coordinates and requires a normalized path to remain a strict child of the storage root location.

  Product

  Apache NiFi Registry

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordlists.apache.orgopenwall.com

• Sep 16, 2026Covenant through 0.6 registers the CovenantHub SignalR hub without an Authorize attribute, allowing unauthenticated callers to invoke CreateHttpListener and recCVE-2026-92717 · Other software · cobbr · reported by VulnCheckCritical 9.3

  Covenant through 0.6 registers the CovenantHub SignalR hub without an Authorize attribute, allowing unauthenticated callers to invoke CreateHttpListener and receive a signed JWT token. Attackers can use the obtained token to authenticate against the entire operator API and access grunts, credentials, binaries, events, and the operator roster.

  Product

  Covenant

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 16, 2026Adenion Blog2Social plugin for WordPress before 9.1.0 exposes the email addresses of all registered WordPress users to low-privileged accounts.CVE-2026-89030 · WordPress plugins & themes · reported by VulnCheckMedium 5.3

  Adenion Blog2Social plugin for WordPress before 9.1.0 exposes the email addresses of all registered WordPress users to low-privileged accounts. The b2s_search_user AJAX handler in includes/Ajax/Get.php invokes B2S_Tools::searchUser() in includes/Tools.php, which returns the email address of every matching user without restricting access to callers holding the list_users capability, allowing any user with the edit_posts capability to retrieve user email addresses including those of administrators.

  Fixed in

  9.1.0

  What to do

  Update the plugin to 9.1.0 or newer.

  Full record and what to do →NVD recordwordpress.orgvulncheck.com

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register cCVE-2026-90030 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register controls the behavior of the EndTransfer command used to stop an active transfer. Older DWC3 programming guide revisions recommended setting forceRM=1 when issuing EndTransfer. Newer programming guide revisions recommend issuing EndTransfer with forceRM cleared. With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer aborted through the ep_dequeue path was observed to remain active after EndTransfer completion. A subsequent StartTransfer issued on the same endpoint triggered writes associated with the aborted transfer. This resulted in an SMMU fault because the transfer buffer had already been unmapped during EndTransfer command-completion cleanup. Using forceRM=0 eliminates the issue. Although older DWC3 programming guide revisions recommended setting forceRM=1, no issues are known from using forceRM=0. Clear forceRM when issuing EndTransfer to provide consistent EndTransfer behavior and align with newer programming guide recommendations.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: harmony: initialize locks before requesting IRQ snd_harmony_create() registers the ICVE-2026-89980 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: ALSA: harmony: initialize locks before requesting IRQ snd_harmony_create() registers the IRQ before initializing h->lock and h->mixer_lock. A pending interrupt can invoke the handler while these locks are uninitialized. Initialize both locks before requesting the IRQ so the handler always sees valid lock state.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: hdac_hda: Fix hlink refcount leak on component registration failure hdac_hda_dev_proCVE-2026-89944 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ASoC: hdac_hda: Fix hlink refcount leak on component registration failure hdac_hda_dev_probe() gets the HDA link with snd_hdac_ext_bus_link_get() before registering the ASoC component. If component registration fails, the function returns without dropping the link reference. Always call snd_hdac_ext_bus_link_put() after the registration attempt so the reference taken during probe is balanced on both success and failure.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Move arena register slot below TCC context Currently, the stack layout plaCVE-2026-89905 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Move arena register slot below TCC context Currently, the stack layout places the optional arena register slot above the tail call counter context. When arena_vm_start is dynamically enabled, it shifts the relative offset of the tcc_ptr slot within the stack frame, causing hardcoded tracking macros to mismatch and leading to memory misalignment or corruption potentially. To fix this, move the arena register save and restore sequences below the tail call counter context slots in both build_prologue() and the epilogue. Update __build_epilogue() to insert a proper offset decrement to safely skip the unneeded tcc_ptr reading block while accurately aligning with the relocated arena slot at the very bottom. With this patch, the tcc_ptr slot is always positioned at a fixed distance directly underneath the base callee-saved registers that is independent of whether the arena features are on.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: LoongArch: Do not save/restore percpu base register in rethook trampoline The rethook tramCVE-2026-89903 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: LoongArch: Do not save/restore percpu base register in rethook trampoline The rethook trampoline saves $r21 ($u0), the percpu base, into its frame at entry and restores it at exit. Inbetween rethook_trampoline_handler() may schedule via preempt_enable_notrace(). If the task migrates to another CPU, the frame's $r21 holds the old CPU's percpu base, and restoring it poisons $r21 on the new CPU. Until the next user->kernel transition heals $r21, all this_cpu_*() accesses (runqueues, RCU per-CPU data, timer tick programming, FPU ownership) hit the wrong CPU's percpu area. Under kretprobe-heavy preemptible load this can corrupt scheduler and timer state: scheduling-while-atomic splats, wrong-CPU RCU warnings, WARN_ON_ONCE(rq != this_rq()) in nohz_balance_exit_idle(), and CPUs parking in the idle loop with the constant timer never re-armed (hard lockup). Reproduces on a Loongson-3A6000 with kretprobes on VFS paths plus heavy file churn (OS install / unsquashfs). By convention $r21 always holds the current CPU's percpu base in kernel mode: SAVE_SOME() at exception entry reloads it only when coming from user mode, and

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: airspy: use vb2_video_unregister_device() on disconnect to fix NULL deref airspy_diCVE-2026-89901 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: media: airspy: use vb2_video_unregister_device() on disconnect to fix NULL deref airspy_disconnect() clears s->udev under v4l2_lock, but airspy_stop_streaming() unconditionally calls airspy_ctrl_msg() and airspy_free_stream_bufs() afterwards. If a streaming user closes the device after disconnect, stop_streaming() runs and dereferences the NULL s->udev: airspy_stop_streaming() airspy_ctrl_msg(s, CMD_RECEIVER_MODE, 0, 0, NULL, 0) usb_sndctrlpipe(s->udev, 0) /* NULL deref */ airspy_free_stream_bufs(s) usb_free_coherent(s->udev, ...) /* NULL deref */ The airspy driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&s->vdev) with vb2_video_unregister_device(&s->vdev) and move it before clearing s->udev. vb2_video_unregister_device() releases the vb2 queue, which synchronously runs airspy_stop_streaming() if streaming is active, so the URBs, coherent DMA stream buffers and the hardware stop control message all execute while s->udev is still valid. vb2_video_unregister_device() locks vdev->queue->lock (vb_queue_lock) internally, and stop_streaming(

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: em28xx: defer audio-only extension registration The audio-only path registers extenCVE-2026-89892 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: media: em28xx: defer audio-only extension registration The audio-only path registers extensions while probing the primary device. For a dual-TS board, this happens before dev_next is created. The duplicate device inherits is_audio_only and is then independently inserted into em28xx_devlist. The list is intended to contain only primary devices: extension operations reach the secondary device through dev_next. The independently linked secondary can be freed during disconnect while its list node remains reachable, resulting in a use-after-free. Defer audio-only extension registration to the module-request work item. It runs only after probing has completed construction of the optional secondary device, so only the primary is registered and extension callbacks reach the secondary through dev_next.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: rc: sunxi-cir: Unregister rc device on probe failure After rc_register_device() sucCVE-2026-89883 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: media: rc: sunxi-cir: Unregister rc device on probe failure After rc_register_device() succeeds, later probe failures must undo the registration with rc_unregister_device(). The current error path jumps to the allocation cleanup label and only calls rc_free_device(), leaving the rc device registration and resources created by rc_register_device() behind. Add a registered-device unwind label for the IRQ lookup, IRQ request, and hardware initialization failure paths. Keep rc_free_device() for failures before rc_register_device() succeeds.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdCVE-2026-89881 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to NULL before any pending streaming teardown has run. When user space later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming() which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases each coherent buffer with: usb_free_coherent(dev->udev, dev->buf_size, dev->buf_list[dev->buf_num], dev->dma_addr[dev->buf_num]); usb_free_coherent() returns immediately when its dev argument is NULL, so every DMA stream buffer that was live at disconnect is silently leaked. The URBs allocated in rtl2832_sdr_alloc_urbs() outlive the device for the same reason. The rtl2832_sdr driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&dev->vdev) with vb2_video_unregister_device(&dev->vdev) and move it before clearing dev->udev. vb2_video_unregister_device() releases the vb2 queue, which synchronously runs rtl2832_sdr_stop_streaming() if streaming is active, so URBs and coherent

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: zoran: Avoid freeing a registered video_device twice zoran_init_video_device() instCVE-2026-89870 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: media: zoran: Avoid freeing a registered video_device twice zoran_init_video_device() installs zoran_vdev_release() as the video_device release callback through zoran_template. After video_register_device() succeeds, video_unregister_device() drops the registered video_device reference and the V4L2 core eventually invokes that release callback, which kfree()s the video_device. zoran_exit_video_devices() called video_unregister_device() and then kfree(zr->video_dev), so device teardown could free the same video_device twice. Remove the direct kfree() and clear the cached pointer after unregistering. The pre-registration failure path keeps its manual free because the video_device was not registered there. This issue was found by a static analysis checker and confirmed by manual source review.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: use disable_irq() during power-off The IRQ is registered as a threaded CVE-2026-89869 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: use disable_irq() during power-off The IRQ is registered as a threaded IRQ. Using disable_irq_nosync() in iris_vpu_power_off() does not wait for an already queued threaded IRQ handler to complete before returning. As a result, a threaded IRQ handler may still run after the VPU has been powered down and access hardware registers after power-off. Replace disable_irq_nosync() with disable_irq() so the power-off path waits for any in-flight threaded IRQ handler to complete before returning.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix init ordering in amdgpu_vram_mgr_init() drmm_cgroup_register_region() is cCVE-2026-89828 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix init ordering in amdgpu_vram_mgr_init() drmm_cgroup_register_region() is called before INIT_LIST_HEAD() and gpu_buddy_init() in amdgpu_vram_mgr_init(). If it fails, the function returns early and bypasses those initializations. Since adev->mman.initialized is set to true before amdgpu_vram_mgr_init() is called, a failure triggers amdgpu_ttm_fini(), which calls amdgpu_vram_mgr_fini(), which then: - Calls list_for_each_entry_safe() on reservations_pending and reserved_pages, whose list_head::next pointers are zero-initialized (NULL). The loop does not recognize them as empty and dereferences NULL. - Calls gpu_buddy_fini(), which iterates free_trees[] unconditionally via for_each_free_tree(). Since mm->free_trees is NULL (never allocated), this dereferences NULL. Both result in a kernel panic on the module load error path. Fix by moving drmm_cgroup_register_region() to after the list and buddy allocator are fully initialized, so the teardown path is safe to run.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: drm: fix race between partial drm_dev_register() failure and ioctl If drm_dev_register() fCVE-2026-89823 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: drm: fix race between partial drm_dev_register() failure and ioctl If drm_dev_register() fails after registering a minor (e.g. render minor registered, primary minor fails), userspace could have opened the first minor and entered a drm_dev_enter() critical section. Since the unplugged flag was never set, the ioctl proceeds while the error path tears down device resources. Fix this by introducing drm_dev_synchronize_unplug(), which sets the unplugged flag and waits for the SRCU barrier, ensuring all in-flight drm_dev_enter() critical sections complete before cleanup proceeds; call it on the error path of drm_dev_register().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: rpcrdma: arm rn_done before publishing the notification rpcrdma_rn_register() inserts @rn CVE-2026-89798 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: rpcrdma: arm rn_done before publishing the notification rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before storing the caller's callback in rn->rn_done. The xarray makes @rn reachable to rpcrdma_remove_one(), which walks rd_xa and invokes rn->rn_done(rn) for every registered notification. A device removal that races a fresh registration can therefore observe @rn with rn_done still NULL, because the notification objects are zero allocated by their owners, and call through a NULL function pointer. Store rn->rn_done before xa_alloc() publishes @rn. The xarray's store-side and load-side ordering then guarantees that any CPU which finds @rn in rd_xa also observes the armed callback. rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel for a completed registration, so the early store must not survive a failed registration. Clear rn_done again when xa_alloc() fails. Were it left set, the failed-accept cleanup path would call rpcrdma_rn_unregister() on an @rn that was never inserted, erasing an unrelated rd_xa slot and underflowing rd_kref.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026Apache Airflow Keycloak provider: the unauthenticated token endpoint accepts a client-credentials grant for any confidential client registered in the Keycloak rCVE-2026-76187 · Websites & servers · Apache Software Foundation · reported by security@apache.orgCritical 9.8

  Apache Airflow Keycloak provider: the unauthenticated token endpoint accepts a client-credentials grant for any confidential client registered in the Keycloak realm, not only the client configured for Airflow. No allowlist restricts which client ids may authenticate, so the credentials of an unrelated application that happens to share the realm are valid Airflow login credentials, and Airflow mints a signed session token for that application's service account. The endpoint also answers unauthenticated credential guesses against Keycloak under Airflow's identity. Affects deployments using the Keycloak auth manager whose realm is shared with other confidential clients. The attacker needs valid credentials for any one of those clients, not for Airflow. Resource authorization is still evaluated per subject, so the access gained is whatever that service account holds, plus any endpoint gated only on being authenticated. Users of apache-airflow-providers-keycloak are recommended to upgrade to version 0.10.0 or later, which accepts only the configured client on that grant.

  Product

  Apache Airflow Keycloak provider

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comlists.apache.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: SUNRPC: check rpc_sockaddr2uaddr() return value in rpcb_register_inet4/6 rpcb_register_ineCVE-2026-89784 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: SUNRPC: check rpc_sockaddr2uaddr() return value in rpcb_register_inet4/6 rpcb_register_inet4() and rpcb_register_inet6() store the result of rpc_sockaddr2uaddr() into map->r_addr without checking it for NULL. rpc_sockaddr2uaddr() returns NULL when its final kstrdup() fails, and the unchecked NULL is then carried into the synchronous RPCBPROC_SET encode path: rpcb_register_call() -> rpc_call_sync() -> rpcb_enc_getaddr() -> encode_rpcb_string(), whose first statement is strlen(string), dereferencing NULL and oopsing the kernel. The crash reproduces under failslab on v6.12; with KASAN the NULL dereference surfaces as a fault on the shadow of address zero: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 [#1] PREEMPT SMP KASAN RIP: 0010:strlen (lib/string.c:409) Call Trace: encode_rpcb_string (net/sunrpc/rpcb_clnt.c:890) rpcb_enc_getaddr (net/sunrpc/rpcb_clnt.c:910) rpcauth_wrap_req_encode (net/sunrpc/auth.c:745) call_encode (net/sunrpc/clnt.c:1966) __rpc_execute (net/sunrpc/sched.c:952) rpc_run_task (net/sunrpc/clnt.c:1243) rpc_call_sync (net/sunrpc/clnt

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 15, 2026Incorrect privilege assignment in the admin user-management component of Webkul Bagisto 2.4.9 allows an authenticated backend user holding only the settings.useCVE-2026-79411 · Other software · reported by MITREHigh 8.8

  Incorrect privilege assignment in the admin user-management component of Webkul Bagisto 2.4.9 allows an authenticated backend user holding only the settings.users.edit permission to escalate to full administrator. The user-update endpoint (route admin.settings.users.update, UserController::update()) does not verify that the actor is permitted to grant the requested role, does not prevent a user from changing their own role, and does not restrict assignment to roles whose permission set is a subset of the actor's own. By submitting a request that sets role_id to the Administrator role for their own account, a low-privileged administrator gains every admin-panel capability, including store configuration, payment gateway credentials, and customer PII.

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 15, 2026Improper validation of the quantity parameter in the add-to-cart path of Webkul Bagisto v2.4.9 allows authenticated attackers to reduce their order total below CVE-2026-79410 · Other software · reported by MITREHigh 8.1

  Improper validation of the quantity parameter in the add-to-cart path of Webkul Bagisto v2.4.9 allows authenticated attackers to reduce their order total below the legitimate price of shippable goods.

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 15, 2026An issue in Webkul Bagisto 2.4.9 allows a remote attacker to obtain sensitive information via the add-to-cart API and the downloadable fulfilment components.CVE-2026-79409 · Other software · reported by MITREMedium 6.5

  An issue in Webkul Bagisto 2.4.9 allows a remote attacker to obtain sensitive information via the add-to-cart API and the downloadable fulfilment components.

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 15, 2026In gmc_phy_lp3_exit_restore_registers of phy_power.c, there is a possible escalation of privilege due to a missing bounds check.CVE-2026-58695 · Computers, phones & browsers · Google · reported by dsap-vuln-management@google.comHigh 7.8

  In gmc_phy_lp3_exit_restore_registers of phy_power.c, there is a possible escalation of privilege due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.

  Product

  Android

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordsource.android.com

• Sep 15, 2026MCP Context Forge is an AI gateway, registry, and proxy for MCP, A2A, REST, and gRPC APIs.CVE-2026-53710 · Other software · IBM · reported by GitHubCritical 10

  MCP Context Forge is an AI gateway, registry, and proxy for MCP, A2A, REST, and gRPC APIs. Prior to 1.0.2, the python_sandbox_server in mcp-servers/python/python_sandbox_server/src/python_sandbox_server/server_fastmcp.py exposes raw getattr through safe_builtins, omits a required _getattr_ guard, and relies on validate_code checks for literal dangerous dunder strings. An attacker can construct dunder names at runtime, traverse the Python class hierarchy, reach subprocess.Popen, and execute OS commands with the server process privileges through the execute_code MCP tool. The HTTP/SSE transport can expose this tool without authentication, while stdio-only deployments have reduced network reachability. The issue affects the python_sandbox_server subproject and does not directly affect the core Context Forge gateway or proxy components. This issue is fixed in version 1.0.2.

  Product

  mcp-context-forge

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.