Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
25,332 results · page 6 of 507
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: amt: send the relay's General Query directly from the receive path An skb queued in a qdisCVE-2026-98968 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1
In the Linux kernel, the following vulnerability has been resolved: amt: send the relay's General Query directly from the receive path An skb queued in a qdisc can outlive the tunnel it references through a raw pointer in skb->cb. For example, with igmp_qrv set to 1 on the relay a tunnel lives for 135s, so a netem delay of 180s on the amt device outlives it; when the tunnel expires and is freed, the subsequent dequeue triggers a use-after-free in amt_dev_xmit(). BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20 Call Trace: amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262] dev_hard_start_xmit+0x22f/0x620 sch_direct_xmit+0x12e/0xac0 netem_dequeue+0x333/0xc50 net_tx_action+0x35c/0xa60 amt_send_igmp_gq() and amt_send_mld_gq() are only called from amt_request_handler(), inside the rcu_read_lock_bh() section of amt_rcv(). amt_request_handler() already has the tunnel the query is for: it found or created it inside that section. Queuing the query with dev_queue_xmit() only leads back into amt_dev_xmit(), which strips the Ethernet header and calls amt_send_membership_query() for that tunnel. Make that call directly from the two senders instead, the same
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: cxgb4/ch_ktls: disable softirqs around tid_list erases chcr_ktls_cpl_act_open_rpl() insertCVE-2026-98967 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: cxgb4/ch_ktls: disable softirqs around tid_list erases chcr_ktls_cpl_act_open_rpl() inserts into tid_list from the receive path using xa_insert_bh(). The array is shared by the adapter's connections and initialized with XA_FLAGS_LOCK_BH. However, chcr_ktls_dev_del() and the chcr_ktls_dev_add() error path use xa_erase(), which takes the XArray lock without disabling softirqs. When cleanup runs with softirqs enabled, a receive softirq for another connection on the same CPU can interrupt the erase and spin on the lock held by the interrupted task. Use xa_erase_bh() at both sites to match the insertion path.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: bonding: fix the program leak when XDP is replaced We need to release the reference on theCVE-2026-98966 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: bonding: fix the program leak when XDP is replaced We need to release the reference on the old BPF prog, whether we are going to no-prog, or replacing the prog with another. Spotted by AI while running tests for the propagation series (leaked programs were accumulating). Selftest will come in the net-next series to avoid conflicts.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: ice: Restore Ordered MMIO Writes for Tx Doorbells The DQL accounting state which tracks thCVE-2026-98965 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: ice: Restore Ordered MMIO Writes for Tx Doorbells The DQL accounting state which tracks the number of bytes queued for the NIC to transmit, namely dql->num_queued, is updated by the ICE driver when it invokes __netdev_tx_sent_queue(). Subsequently the driver updates the hardware queue tail allowing the NIC to begin processing the work queue. The queue accounting update should be ordered before the NIC begins transmitting descriptors. The transmit path currently updates the hardware doorbell using writel_relaxed(), which (on arm64) does not provide the same ordering guarantees between writes to normal memory and writes to MMIO registers that writel() does. This introduces a potential race where the NIC begins transmitting descriptors before the dql->num_queued update is globally visible. If the NIC finishes before the update is observed by dql_completed(), it detects an invalid state where more bytes have been completed than have been queued. When this happens the following BUG_ON is triggered. BUG_ON(count > num_queued - dql->num_completed); This has been observed and manifests as the following crash (note t
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet: use the local P2P device on metadata allocation failure nvmet_req_alloc_p2pmem_sglsCVE-2026-98964 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: nvmet: use the local P2P device on metadata allocation failure nvmet_req_alloc_p2pmem_sgls() assigns req->p2p_dev only after the data and metadata SGL allocations succeed. If the data allocation succeeds but the metadata allocation fails, out_free_sg passes req->p2p_dev to pci_p2pmem_free_sgl() before that assignment has taken place. Pass the local p2p_dev argument instead, so cleanup uses the same PCI device as the successful data allocation.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: always return -EIOCBQUEUED after btrfs_uring_read_extent_endio If all bios finish bCVE-2026-98963 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: btrfs: always return -EIOCBQUEUED after btrfs_uring_read_extent_endio If all bios finish before btrfs_encoded_read_regular_fill_pages() returns, it calls btrfs_uring_read_extent_endio() and previously returned the I/O status. A negative errno then made btrfs_uring_read_extent() unlock and free while btrfs_uring_read_finished() did the same again. Return -EIOCBQUEUED so only the deferred path cleans up.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: free iov when btrfs_uring_read_extent() fails After btrfs_uring_read_extent(), the CVE-2026-98962 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: btrfs: free iov when btrfs_uring_read_extent() fails After btrfs_uring_read_extent(), the caller always jumped to out_acct. That skips kfree(data->iov), which is only correct for -EIOCBQUEUED where the deferred path owns the iov. On failure, fall through to out_free instead.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: unlock inode and extent in caller when io_uring read extent fails btrfs_uring_read_CVE-2026-98961 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: btrfs: unlock inode and extent in caller when io_uring read extent fails btrfs_uring_read_extent() runs only after btrfs_encoded_read() has taken the inode shared lock and the extent lock. On failure it used to unlock in out_fail, and a pages-array allocation failure returned -ENOMEM without unlocking at all. Unlock in the caller instead on all failure returns, matching the copy_to_user() error path. The deferred -EIOCBQUEUED path still unlocks in btrfs_uring_read_finished().
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: don't stash io_uring encoded data across -EAGAIN Returning -EAGAIN while leaving btCVE-2026-98960 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: btrfs: don't stash io_uring encoded data across -EAGAIN Returning -EAGAIN while leaving btrfs_uring_encoded_data in the cmd PDU leaks if the request is cancelled or the ring exits before reissue. io_uring does not free driver PDU allocations on cleanup. Write: io_queue_sqe() always issues with IO_URING_F_NONBLOCK first, so return -EAGAIN before allocating and free data on every exit. Read: free on nowait -EAGAIN too; only -EIOCBQUEUED keeps the allocation for btrfs_uring_read_finished().
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: fix xattr replace when multiple xattrs are packed in the same item If we have a btrCVE-2026-98959 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix xattr replace when multiple xattrs are packed in the same item If we have a btrfs_dir_item item that packs multiple xattrs and then we replace the value of one of them (with the setxattr(2) family of syscalls) with another value of a different size, we end up not having a fully initialized btrfs_dir_item, resulting in a corruption that the tree checker will detect at extent buffer writeback time. This is because in btrfs_setxattr() when we find a btrfs_dir_item with multiple xattrs (due to the crc32c hash of their name being the same) we delete one of the xattr items (btrfs_dir_item) and then insert a new one, but the deletion and insertion results in shifting existing data in the leaf and therefore when the new value of a xattr has a different size, the new btrfs_dir_item is placed in a leaf section that was not initialized and we only copy the value's data and set the value's length in the new btrfs_dir_item, without setting the name, the name's length, the key (which must be all zeroes for xattrs), flags (BTRFS_FT_XATTR) and transaction ID. The following script reproduces the issue: $ cat test.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: account non-AQL frames per peer rather than per link The driver increments wciCVE-2026-98958 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: account non-AQL frames per peer rather than per link The driver increments wcid->non_aql_packets when a frame goes to the hardware queue. The completion path decrements the counter again. For an MLO peer, the hardware reports the completion on the link that it used for the transmission. This link can differ from the link that the driver queued the frame on. In that case, the increment and the decrement go to different link wcids, and the count drifts upwards until it blocks the station. Keep the count on the wcid of the primary link, like the other peer-wide state.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: disable rx napi when removing device Unloading the mt7915e module withCVE-2026-98957 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: disable rx napi when removing device Unloading the mt7915e module with a MT7916 triggers multiples WARN in __netif_napi_del_locked() and in page_pool_disable_direct_recycling() because the driver does not disable the napi before destroying it. This is troublesome since on MT7916 it is required to unload the module and reinsert it with a different enable_6ghz parameter to change the frequency. The system generally becomes unstable after reinserting the module. Fix it by disabling rx napi inside mt7915e itself, even through napi rx is enabled in the mt76 generic code. Disabling it in the mt76 generic code was previously attempted and reverted because napi was disabled too late and rx handlers could access freed structures. Note that the tx side is enabled and disabled by the mt76 generic code. It is disabled in mt7915_stop_hardware() since, unlike mt7915_unregister_device(), is it also called in the probe path if an error happens after rx napi is enabled.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: adau1372: allow sleepy powerdown GPIOs gpiod_set_value() emits a WARN when the GPIO CVE-2026-98956 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: ASoC: adau1372: allow sleepy powerdown GPIOs gpiod_set_value() emits a WARN when the GPIO provider indicates that it can sleep, as is typical for I2C controlled GPIO expanders. Since the powerdown GPIO is only manipulated in process context, use the _cansleep variant instead. This lets the driver use sleepy GPIOs to power off the chip.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: flow_dissector: avoid u16 truncation of skb->len when computing thoff __skb_flow_dissect()CVE-2026-98955 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: flow_dissector: avoid u16 truncation of skb->len when computing thoff __skb_flow_dissect() computes key_control->thoff using: key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen); min_t(u16, ...) casts both arguments to u16 before comparing them. Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the truncated length wins and thoff is set to a bogus small value, even when the dissection succeeded. For example, an IPv4/TCP frame with skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as skb_probe_transport_header() point the transport header inside the Ethernet header. Such skbs are not exotic: - At the time of commit d0c081b49137 ("flow_dissector: properly cap thoff field"), AF_PACKET with PACKET_VNET_HDR could already build GSO skbs larger than 64KB (MTU checks are skipped for GSO, and alloc_skb_with_frags() accepted up to MAX_SKB_FRAGS (17) order-0 pages on top of the linear part). - BIG TCP now makes skbs larger than 64KB common. - The following patch makes tun_get_user() dissect IFF_TAP frames before eth_type_trans() pulls the Ethernet header, so a GSO fram
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: net: always dissect GSO packets in __virtio_net_hdr_to_skb() Commit 9e8db5913264 ("net: avCVE-2026-98954 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: always dissect GSO packets in __virtio_net_hdr_to_skb() Commit 9e8db5913264 ("net: avoid false positives in untrusted gso validation") added a '&& skb->network_header' check before flow-dissecting GSO packets without VIRTIO_NET_HDR_F_NEEDS_CSUM in __virtio_net_hdr_to_skb(), because some callers (such as tun_get_user(), tun_xdp_one(), virtnet_receive_done(), and raw_verify_header()) called virtio_net_hdr_*_to_skb() before initializing skb->network_header and skb->dev. Because __alloc_skb() and __build_skb_around() zero-initialize skb->network_header to 0 (unlike mac_header and transport_header which are initialized to ~0U), those four callers always had skb->network_header == 0 and bypassed flow dissection in __virtio_net_hdr_to_skb(). More generally, skb->network_header is an offset from skb->head (where 0 is also a valid offset whenever skb_headroom(skb) is 0), not a boolean flag. Whenever the 'if (gso_type && skb->network_header)' branch was skipped, the fallback 'else if (gso_type)' only pulled nh_min_len + thlen (40 bytes for TCPv4) without dissecting the packet, without validating ip_proto or n_proto,
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: devlink: fix devlink_rel reference leak when notify work is pending devlink_rel_nested_in_CVE-2026-98953 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: devlink: fix devlink_rel reference leak when notify work is pending devlink_rel_nested_in_notify_work_schedule() takes a reference on the devlink_rel for the notify work and then queues the work, ignoring the return value of schedule_delayed_work(). If the work is already pending, nothing new is queued, the work runs only once and drops only one reference, so the extra one is leaked together with the devlink_rel and its index in devlink_rels. This is easy to hit. devl_register() of a nested instance queues the work, and if the instance is unregistered before the work has run, devlink_rel_put() queues it again while it is still pending. The work also keeps rescheduling itself for as long as the parent devlink lock cannot be taken, which widens the window. Registering and unregistering a nested devlink instance 100 times while holding the parent lock leaks all 100 devlink_rel objects. The reschedule path in devlink_rel_nested_in_notify_work() has the same problem: if the work was queued again while it was running, the reference it holds is never dropped. Drop the reference in both places when the work was alread
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: pfcp: make sure the SEID is linear before reading it pfcp_encap_recv() only makes sure thaCVE-2026-98952 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.3
In the Linux kernel, the following vulnerability has been resolved: pfcp: make sure the SEID is linear before reading it pfcp_encap_recv() only makes sure that the UDP header and the 4 byte PFCP header are in the linear area. When the S flag is set, pfcp_session_recv() then reads the 8 byte SEID that follows, which is not covered by the pskb_may_pull() check. A short PFCP packet with the S flag set, or one whose session header lies in a fragment, therefore makes pfcp_session_recv() read beyond the end of the packet data, and whatever it finds there is stored in the tunnel metadata that flower later classifies on. Pull up to the end of the SEID before reading it, and drop packets that are too short to contain it. Reload the header pointer afterwards since pskb_may_pull() may reallocate the skb head. Use offsetofend() rather than sizeof(struct pfcphdr_session): the structure is not packed, so its size is 16 bytes because of the alignment of the __be64 member, while the header on the wire is only 12 bytes, and valid session messages would be dropped.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: riscv: ptrace: Zero-initialize regset buffers before copyin user_regset_copyin() only copiCVE-2026-98951 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: riscv: ptrace: Zero-initialize regset buffers before copyin user_regset_copyin() only copies `count` bytes, so a PTRACE_SETREGSET request with a short iov_len leaves the rest of the stack buffer uninitialized. In riscv_vr_set() that garbage is validated and copied into the target's vstate, and in riscv_cfi_set() it can be stored as the target's shadow stack pointer. Zero both buffers, as the get path already does.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: flow_dissector: avoid u16 truncation of hlen in bpf_flow_dissect() bpf_flow_dissect() saniCVE-2026-98950 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: flow_dissector: avoid u16 truncation of hlen in bpf_flow_dissect() bpf_flow_dissect() sanitizes the offsets returned by the BPF program with clamp_t(u16, ..., hlen). If hlen is bigger than 65535, the upper bound is truncated before the comparison. For instance, with hlen == 65536, both nhoff and thoff are forced to zero, even if the program returned sane values. This is the same class of bug as the one fixed in commit 99bda1ecbd56 ("flow_dissector: avoid u16 truncation of skb->len when computing thoff"). That fix does not cover the BPF path, because __skb_flow_dissect() returns early when a BPF flow dissector handles the packet. struct bpf_flow_keys stores nhoff and thoff as u16, so cap hlen to U16_MAX before clamping. Found by sashiko while reviewing the commit above.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix reference and vm_bo handling in remap() When a map overlaps part of aCVE-2026-98949 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix reference and vm_bo handling in remap() When a map overlaps part of an existing mapping, pvr_vm_gpuva_remap() splits the mapping into prev/next parts covering what the request did not take, instead of creating something new. It gets two things wrong. - A GEM reference is taken for each part but it's never needed and never dropped, so it leaks one reference per split (remap-next-in-2m in tests/imagination/pvr_vm_map.c): CRITICAL: 33558528 bytes of shmem still held after close - The parts still belong to the original object being split, but pvr_vm_gpuva_remap() links them to ctx->gpuvm_bo, the new object's vm_bo: prev_va --obj--> BO_A BO_B <--obj-- vm_bo (ctx->gpuvm_bo) \___________link___________/ (mismatch: BO_A != BO_B) drm_gpuva_link() catches the mismatch: WARNING: drivers/gpu/drm/drm_gpuvm.c:2108 at drm_gpuva_link+0x2ec/0x310 drm_WARN_ON(obj != vm_bo->obj) Call trace: drm_gpuva_link pvr_vm_gpuva_remap __drm_gpuvm_sm_map pvr_vm_map pvr_ioctl_vm_map Link them to op->remap.unmap->va->vm_bo instead. The l
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_flower: Fix port range register leak in tmplt_create() mlxsw_sp_flower_tmpCVE-2026-98948 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_flower: Fix port range register leak in tmplt_create() mlxsw_sp_flower_tmplt_create() parses a flow_cls_offload template into a stack-local struct mlxsw_sp_acl_rule_info purely to compute rulei.values.elusage. Parsing can acquire port range registers via mlxsw_sp_flower_parse_ports_range(), but since this rulei never goes through mlxsw_sp_acl_rulei_destroy(), those registers were never released, including through chain template deletion. Factor out of mlxsw_sp_acl_rulei_destroy() the code to actually release the necessary resources and call from mlxsw_sp_flower_tmplt_create() to plug the leak. The issue was found during a review of Wentao Liang's patch referenced below.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: vsock: Fix memory leak in vmci_transport_recv_dgram_cb() During the closure of a datagram CVE-2026-98947 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: vsock: Fix memory leak in vmci_transport_recv_dgram_cb() During the closure of a datagram socket, the vmci_transport_recv_dgram_cb() function may be called, which will add the packets to the socket's backlog; then, after the receive queue is cleared, the __release_sock() function will move the packet back from the socket's backlog to the receive queue, which will lead to a memory leak. sock_close __sock_release __vsock_release // take ownership by user-space lock_sock_nested sock_set_flag(sk, SOCK_DEAD) vmci_transport_release vmci_dispatch_dgs vmci_datagram_invoke_guest_handler vmci_transport_recv_dgram_cb sk_receive_skb if (!sock_owned_by_user(sk)) [...] (!) else if sk_add_backlog() [...] (!) skb_queue_purge(&sk->sk_receive_queue)
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Disable the V3D interrupt across runtime suspend vc4_irq_disable() masks the V3D CVE-2026-98946 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Disable the V3D interrupt across runtime suspend vc4_irq_disable() masks the V3D interrupt sources and then calls synchronize_irq() before the V3D is powered down. However, by itself, this is not enough to quiesce the interrupt handler. synchronize_irq() waits for handlers that have already set IRQD_IRQ_INPROGRESS, and for irqchips reporting IRQCHIP_STATE_ACTIVE. A GIC interrupt chip is able to mark an interrupt active as soon as a CPU acknowledges it, so there these checks cover the whole dispatch path. On RPi 0-3, however, the interrupt controller is ARMCTRL, which has no active state. A CPU that has read the hwirq out of the pending register but has not yet reached handle_level_irq() stays invisible to synchronize_irq(). During a power transition, vc4_irq() may therefore run after the power domain is off, where every V3D register read will return 0xdeadbeef. 0xdeadbeef has FLDONE, FRDONE and OUTOMEM set. This problem doesn't trigger NULL pointer dereference issues only because the functions vc4_irq_finish_bin_job() and vc4_irq_finish_render_job() return early when there is no job pointer, but OUTOME
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: HID: steam: Rearrange teardown sequence This fixes a narrow window during the teardown seqCVE-2026-98945 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: HID: steam: Rearrange teardown sequence This fixes a narrow window during the teardown sequence where callbacks could still be scheduled during cleanup that would then have a dangling pointer to the now-freed steam struct. This also puts work canceling for rumble and mode switch in steam_unregister, as that shouldn't persist while the client hdev is open.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: HID: steam: Refactor registration This refactors and simplifies the registration/unregistrCVE-2026-98944 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: HID: steam: Refactor registration This refactors and simplifies the registration/unregistration flow. Since we now only perform registration when the client isn't opened anymore, the logic for handling that can be removed, and the rest of the function streamlined. We also remove the previous assumption that we have a serial number to show we're registered, replacing it with a single purpose boolean. In a previous refactor the code for unregistering a battery if later registration steps failed was accidentally left out. As a result, a lingering power_supply object could get left over after the steam object was torn down. This is also fixed here.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: sched_ext: Build the cid tables privately and publish them with RCU The cid tables are visCVE-2026-98942 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: sched_ext: Build the cid tables privately and publish them with RCU The cid tables are visible to the cid kfuncs while being modified: the first enable publishes the global pointers before filling them, ops.init_cids() overrides rewrite them in place, and re-enables rebuild them in place. A racing TRACING or SYSCALL program can read unfilled entries, including uninitialized memory in the kmalloc'd tables, or torn topo updates. Tie the tables' lifetimes to the root sched instead: each root enable builds a fresh set privately and publishes the per-table __rcu globals once the layout is final, and root disable unpublishes and RCU-frees the set. A non-NULL global is now always a fully built table which stays valid for the reader's RCU read section, and lookups stay two loads. Kfuncs treat NULL as no-mapping, also after the scheduler exits instead of reporting the stale last mapping. The cid kfuncs are available whether the root scheduler is cid-form or cpu-form, the latter to allow gradual migration to cids. Every root therefore builds and publishes a default mapping. Every reader must either be gated on scheduler
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: ext4: don't enable large folios on encrypted inodes Commit 709f0f1f1bf5 ("ext4: add checksCVE-2026-98941 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7
In the Linux kernel, the following vulnerability has been resolved: ext4: don't enable large folios on encrypted inodes Commit 709f0f1f1bf5 ("ext4: add checks for large folio incompatibilities when BS > PS") disables large folios at mount time if the "encrypt" feature is set. However, enabling that feature on a mounted filesystem circumvents that check, and writing encrypted data results in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000028 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work RIP: 0010:ext4_finish_bio+0xf7/0x3e0 Call Trace: ext4_release_io_end+0x51/0x110 ext4_end_io_end+0x4c/0xe0 ext4_end_io_rsv_work+0xb3/0x100 Fix this by disabling large folios on encrypted inodes, as is already done for inodes that use data journaling. This affects all kernels between v6.19 and v7.2, but it is not needed in v7.3, where the code was significantly refactored.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: lpass-cpu: use DAI table index for playback constraints The DAI ID is a hardwaCVE-2026-98940 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: lpass-cpu: use DAI table index for playback constraints The DAI ID is a hardware port ID and is not necessarily the index of the corresponding entry in variant->dai_driver. When configuring a DAI with LPAIF_I2SCTL_MODE_QUAD01, the probe code currently uses dai_id to index variant->dai_driver. This is incorrect for platforms where DAI IDs are sparse. For example, the IPQ806x MI2S DAI has ID 4 while it is the only entry in the DAI driver table. If that DAI is configured for QUAD01 and probe reaches this branch, the code writes beyond that single entry via dai_driver[4] instead of updating the DAI being processed. Use the loop index i when updating the current DAI's playback channel constraints, while retaining dai_id for indexing the hardware-port specific playback SD-line mode array. This fixes the incorrect DAI table access for platforms where the DAI ID does not match its position in the driver table.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: x86/mm: Drop unnecessary PMD page copy when freeing On a box with a discrete GPU, lockdep CVE-2026-98939 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: x86/mm: Drop unnecessary PMD page copy when freeing On a box with a discrete GPU, lockdep reports a possible deadlock as soon as kswapd shrinks the TTM page pool. The immediate cause is an x86 commit that added an mmap_read_lock() to kernel page protection munging code. The huge vmap code holds the same lock over a GFP_KERNEL allocation, which is a no-no now that reclaim can take it. That allocation is in a page table *free* path and ends up being for dubious purposes[1]. Basically, it tries to avoid hardware setting Accessed=1 in page table entries that are unreachable by the hardware, a non-issue. Remove the PMD copy. Detach the original PMD page at the PUD, flush the mid-level caches, and free the PTE tables straight from the detached PMD page. With no allocation left, the locking issue is gone. Lockdep splat/analysis: WARNING: possible circular locking dependency detected 7.3.0-rc3-f6e7b42bf05b+ #183 Tainted: G U ------------------------------------------------------ kswapd0/269 is trying to acquire lock: ((init_mm).mmap_lock){++++}-{4:4}, at: change_page_attr_set_clr+0x29a/0x4a0 but task
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: rust: irq: pass RegistrationInner as cookie to request_irq With commit ba268514ea14 ("rustCVE-2026-98938 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: rust: irq: pass RegistrationInner as cookie to request_irq With commit ba268514ea14 ("rust: devres: fix race condition due to nesting"), Devres::new() returns Result<Self> by value instead of initializing in-place via PinInit. Because request_irq() is called inside Devres::new(), registration.inner is still uninitialized when the IRQ is enabled, so accessing registration.inner.device() in the IRQ callback can read uninitialized memory. Fix this by storing the Device and handler pointer in RegistrationInner and passing RegistrationInner as the IRQ cookie after its fields are initialized. This is not needed in mainline because commit 98c63ce4d760 ("rust: irq: make Registration compatible with lifetime-bound drivers") removed Devres from irq::Registration and moved request_irq() after all fields are initialized.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: perf/core: Check kernel access when kernel callchains are requested perf_event_open() currCVE-2026-98937 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: perf/core: Check kernel access when kernel callchains are requested perf_event_open() currently gates perf_allow_kernel() only on !attr.exclude_kernel. However, users can still request kernel callchain collection with attr.exclude_callchain_kernel == 0 even when attr.exclude_kernel == 1. That still requires kernel profiling privilege, but the existing check does not enforce it. Update the permission check to call perf_allow_kernel() when either kernel sampling is requested or kernel callchains are requested. This keeps permission checks aligned with requested data and prevents unprivileged use of kernel callchain capture.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: reset ar->num_stations on hardware start When (multiple) hw restart occurs, CVE-2026-98936 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: reset ar->num_stations on hardware start When (multiple) hw restart occurs, we end up in a situation where we cannot accept new stations / mesh peers. This seems to be the 'num_stations' in 'struct ath11k' that did not get reset properly in this case. In ath11k_mac_op_start(), it was indeed the only accounting var that did not get reset so let's clear it too. This avoids problems like those: [1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0 [1248828.088115] Call trace: [1248828.088116] ieee80211_reconfig_stations+0x98/0xc0 (P) [1248828.088119] ieee80211_reconfig+0x774/0x1438 [1248828.088123] ieee80211_restart_work+0x10c/0x178 [1248828.088127] process_one_work+0x178/0x3c0 [1248828.088130] worker_thread+0x280/0x440 [1248828.088133] kthread+0xe0/0xf8 [1248828.088137] ret_from_fork+0x10/0x20 [1248828.088141] ---[ end trace 0000000000000000 ]--- [1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128) [1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: xx:xx:xx:xx
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: rtc: dev: zero-initialize struct rtc_wkalrm to prevent information leak The struct rtc_wkaCVE-2026-98935 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: rtc: dev: zero-initialize struct rtc_wkalrm to prevent information leak The struct rtc_wkalrm has padding holes after the 'pending' member. When returned to userspace via the RTC_WKALRM_RD ioctl, uninitialized kernel stack data residing in these holes may be leaked. Zero-initialize the struct at declaration to eliminate this information leak risk. Fixes smatch warnings: - drivers/rtc/dev.c:392 rtc_dev_ioctl() warn: check that 'alarm' doesn't leak information (struct has a hole after 'pending')
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel() Since commit d58e468b1112 ("flowCVE-2026-98934 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel() Since commit d58e468b1112 ("flow_dissector: implements flow dissector BPF hook") __skb_flow_dissect() needs a net pointer, either from skb->dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network namespace into __skb_flow_dissect") a caller provided pointer. syzbot was able to reach seg6_make_flowlabel() with an skb having neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery message through an IPv4 route using seg6 encap, while net.ipv6.seg6_flowlabel is set to 1. seg6_make_flowlabel() already has a net pointer, use skb_get_hash_net(). WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126, CPU#0: syz.0.17/4930 Call trace: __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126 (P) __skb_get_hash_net+0xe0/0x29c net/core/flow_dissector.c:1903 skb_get_hash include/linux/skbuff.h:1663 [inline] seg6_make_flowlabel+0xcc/0x1ec net/ipv6/seg6_iptunnel.c:132 __seg6_do_srh_encap+0x320/0xbf4 net/ipv6/seg6_iptunnel.c:161 seg6_do_srh+0x4b4/0xa44 net/ipv6/seg6_iptunnel.c:43
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: usb: hub: use shorter 120ms post resume hold for SS root hubs Holding a USB3 hub PM runtimCVE-2026-98933 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: usb: hub: use shorter 120ms post resume hold for SS root hubs Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers an AMD platform issue. Users running Android adb report crashes after adb has been polling and waking up the USB subsystem once a second for some time. Vendors are working on a solution. Disabling USB runtime PM is one way to prevent this issue, but it is also proven that reducing the hold time to 120ms in resume also mitigates it. See Link for more details. Reducing the hold time to 120ms for the USB3 roothub is in itself a valid change and optimization, as the current 200ms is excessive: a root hub has no upstream suspended hub whose wake propagation needs to be accounted for, but still need some time for USB3 link training to complete. Keep the 200ms hold for external hubs that commit 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs") is intended for.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Fix use-after-free in error paths In both altr_edac_a10_device_add() and altrCVE-2026-98932 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.4
In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Fix use-after-free in error paths In both altr_edac_a10_device_add() and altr_portb_setup(), the error path freed the dci structure before releasing the devres group. Since the managed single and double bit IRQ handlers use altdev(dci->pvt_info) as their data, an IRQ firing between freeing dci and unregistering the IRQs could dereference the freed memory. Release the devres group first so the managed IRQs are unregistered before the dci structure is freed.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: mtd: spinand: fix NULL pointer dereference with no ECC engine When "nand-no-ecc-engine" isCVE-2026-98931 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: mtd: spinand: fix NULL pointer dereference with no ECC engine When "nand-no-ecc-engine" is set in DT, nanddev_get_ecc_engine() takes the NAND_ECC_ENGINE_TYPE_NONE path and returns success while leaving nand->ecc.engine NULL. The SPI-NAND code nevertheless dereferences it unconditionally to test for a pipelined engine, so probing such a device oopses immediately. Rather than open-coding the test three times, add a nand_ecc_is_pipelined() helper to the NAND core that folds the NULL check into the integration comparison, and use it everywhere. Future callers then cannot reintroduce the problem.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix IRQ injection with SIGP Stop and Store Status When __inject_sigp_stop() is CVE-2026-98930 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix IRQ injection with SIGP Stop and Store Status When __inject_sigp_stop() is called for a Stop and Store Status operation, if the vCPU is running, the interrupt is marked as pending and the status is stored by the thread performing the KVM_RUN IOCTL. If the vCPU is already stopped, the status is stored immediately. Storing the status means writing into userspace, which might fault, and __inject_sigp_stop() is called from do_inject_vcpu() which in turn is always called holding a spinlock, which is obviously an issue. Fix this by returning -EWOULDBLOCK from __inject_sigp_stop(), and adding a bool flag to indicate whether a store status is needed. The callers of do_inject_vcpu() are modified to pass the pointer to the bool flag; whenever a Store Status operation is needed, the callers can now perform it outside the spinlock. Opportunistically refactor kvm_s390_set_irq_state() to use scoped_guard() and __free(). [ Added Fixes tag while picking -- Claudio ]
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: macsec: initialize SecY before registering the netdevice Creating a MACsec device with MACCVE-2026-98929 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: macsec: initialize SecY before registering the netdevice Creating a MACsec device with MAC offload over an LRO-capable lower device triggers a warning in rtmsg_ifinfo_build_skb() when IPv4 forwarding is enabled by default. register_netdevice() invokes inetdev_init(), which disables LRO and emits a NETDEV_FEAT_CHANGE notification. This reaches macsec_fill_info() before macsec_add_dev() initializes the SecY. key_len is still zero, so macsec_fill_info() returns -EMSGSIZE and trips the WARN_ON in rtmsg_ifinfo_build_skb(), even though the skb has enough space. Even without the warning, notifications during registration can report uninitialized SecY attributes, including the SCI. This ordering has existed since the driver was introduced. Initialize the SecY and apply the new-link attributes before registration. Move MAC address inheritance into macsec_newlink() so the SCI can also be initialized before registration-time notifications report it. Move the per-CPU statistics and metadata destination allocation into ndo_init(), and release partial allocations on failure.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2 pkvm_init_features_from_hCVE-2026-98928 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2 pkvm_init_features_from_host() takes KVM_ARCH_FLAG_GUEST_HAS_SVE and KVM_ARM_VCPU_SVE from the host separately, but pkvm_vcpu_init_sve() tests the bit while vcpu_has_sve() reads the flag. A host that sets the flag without the bit gets a vCPU with a NULL sve_state that the world switch loads the guest's SVE state from. Derive the flag from the bit, and drop the protected path's copy of the host's flag, which is dead code since protected VMs are not allowed SVE.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix life cycle of the nested_mmus array The nested_mmus array holds the shCVE-2026-98927 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7
In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Fix life cycle of the nested_mmus array The nested_mmus array holds the shadow page tables that are used when a guest is running a nested context. These structures are allocated on VCPU_INIT for whole guest, which implies that they may have to be relocated as the array grows. Should a VCPU_INIT occur whilst a vcpu is actively running an L2 and that the allocation requires relocation, that vcpu will still be running with a pointer to the previous structure, which will have been freed. Fix this by turning the array of structures to an array of pointers, which is now allocated at VM creation, sized to the absolute maximum that KVM can handle. In turn, each VCPU_INIT contributes S2_MMU_PER_VCPU to the pool. No reallocation is ever performed, and the life cycle of each object is much clearer: - the nested_mmus array is allocated in kvm_init_nested(), and freed in kvm_arch_destroy_vm() - s2_mmu structures are allocated in kvm_vcpu_init_nested(), and freed on kvm_arch_flush_shadow_all() Finally, the freeing of vcpu->arch.vncr_array is made consistent rather than being done on some failure paths
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Remove sink usage from DPMS [Why] stream->sink is optional and can be nulCVE-2026-98926 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Remove sink usage from DPMS [Why] stream->sink is optional and can be null, so should always be checked before dereference. Additionally, most of its usage in DPMS sequences is for stream->sink->link, which can be replaced with stream->link, as the two should always be the same. [How] * Replace stream->sink->link in DPMS on/off * Add assert to USB4 BW allocation where sink is required * Avoid inconsistencies in resource access, e.g. don't repeat stream->link after it was already saved to a local variable * Pull out effective VPG calculation to helper getter * Formatting fixes
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix self-redirect copied_seq double-counting When a BPF stream_verdict progrCVE-2026-98925 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix self-redirect copied_seq double-counting When a BPF stream_verdict program redirects an skb back to the same socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply() calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the skb is then delivered to the socket's psock ingress queue and later read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via the copied_from_self accounting path. This double-counting causes copied_seq to advance by 2x the actual data length, triggering: TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \ rcvnxt BF2E806, fl 0 WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640 Call Trace: tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfrom+0x19a/0x2a0 __x64_sys_recvfrom+0xe4/0x1f0 do_syscall_64+0xf7/0x530 entry_SYSCALL_64_after_hwframe+0x77/0x7f cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806 WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0 Call Trace: tcp_recvmsg_locked+0x8d1/0x2640 tcp_recvmsg+0x10a/0x500 sock_recvmsg+0x168/0x1d0 __sys_recvfr
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: fs: avoid repeated scans in evict_inodes() We observed hung tasks when users attempted to CVE-2026-98924 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: fs: avoid repeated scans in evict_inodes() We observed hung tasks when users attempted to unmount a filesystem after its disk had been removed while still in use. During device removal, fs_bdev_mark_dead() calls evict_inodes() while holding s_umount. Each time evict_inodes() drops s_inode_list_lock to reschedule, it restarts the walk from the head of s_inodes. With many referenced inodes at the head of the list, these restarts repeatedly scan the same inodes without reclaiming them. This can keep s_umount held for a long time, blocking concurrent umount attempts and triggering hung-task reports. Keep the current inode, already marked I_FREEING, out of the disposal batch until s_inode_list_lock is reacquired. Resume the walk from this inode and dispose of it in a later batch or at the end of the walk. The zero-refcount and state checks under i_lock allow this walker to claim the inode by setting I_FREEING and removing it from the LRU. Other reclaimers skip the inode, leaving this walker responsible for eviction. Only evict() removes it from s_inodes, so keeping it out of the disposal batch ensures that it remai
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: arm64: io: Reject non-user protection in ioremap_prot() Mapping a stack-top page via /dev/CVE-2026-98923 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: arm64: io: Reject non-user protection in ioremap_prot() Mapping a stack-top page via /dev/mem with PROT_NONE and then reading that process's /proc/<pid>/cmdline triggers a spurious WARN in ioremap_prot() through generic_access_phys(): WARNING: ./arch/arm64/include/asm/io.h:275 at generic_access_phys Call trace: generic_access_phys+0x1c8/0x228 (P) __access_remote_vm+0x2b4/0x398 access_remote_vm+0x14/0x30 get_mm_cmdline+0xf8/0x2a0 proc_pid_cmdline_read+0x68/0x120 generic_access_phys() passes the protection derived from the user PTE to ioremap_prot(). On arm64, a PROT_NONE mapping is represented by a present-invalid PTE, so pte_present() still returns true and the protection reaches ioremap_prot(). A PROT_NONE mapping does not have PTE_USER, causing the existing WARN_ON_ONCE() in ioremap_prot() to fire even though this is a valid user mapping. Execute-only mappings have the same issue and must not be readable through this path either. ioremap_prot() should therefore reject protection values without PTE_USER without warning. This makes the access fail cleanly for PROT_NONE and execute-only
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: net: emac: move setting of netops to fix crash fixes the following crash on driver initialCVE-2026-98922 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: emac: move setting of netops to fix crash fixes the following crash on driver initialization: |BUG: Kernel NULL pointer dereference on read at 0x00000158 |Faulting instruction address: 0xc0566b40 |Oops: Kernel access of bad area, sig: 11 [#1] |BE PAGE_SIZE=4K PowerPC 44x Platform |Modules linked in: |CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Tainted: GW 7.3.0-rc3+ #1 |Tainted: [W]=WARN |Hardware name: MyBook Live APM821XX 0x12c41c83 PowerPC 44x Platform |NIP: c0566b40 LR: c05648f8 CTR: c04c1e9c |REGS: c1053a20 TRAP: 0300 Tainted: GW (7.3.0-rc3+) |MSR: 0002b000 <CE,EE,FP,ME> CR: 24008808 XER: 00000000 |DEAR: 00000158 ESR: 00000000 |GPR00: c05648f8 c1053b10 c1063600 c1030000 c5ab3000 00000000 [...] |GPR08: 00000002 00000000 00000000 c1053b40 84002808 00000000 [...] |GPR16: cfffd210 00000002 c0beafcc cfffc960 00000000 c1030644 [...] |GPR24: c0beafbc c1037000 00000000 0000000a 00000000 c1030000 [...] |NIP [c0566b40] phy_link_topo_add_phy+0x2c/0x1d0 |LR [c05648f8] phy_attach_direct+0x1a4/0x368 |Call Trace: |[c1053b10] [c0811e04] klist_put+0x54/0xb4 (unreliable) |[c1053b40] [c05648f8] phy_attach_direct+0x1a4/0
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: ovl: fix UAF in ovl_do_mkdir() debug print ovl_do_mkdir() prints the input dentry with %pdCVE-2026-98921 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: ovl: fix UAF in ovl_do_mkdir() debug print ovl_do_mkdir() prints the input dentry with %pd after vfs_mkdir(). Since commit fe497f0759e0 ("VFS: change vfs_mkdir() to unlock on failure."), vfs_mkdir() calls end_creating() on the input dentry on failure and may replace it on success, so the post-call %pd can use-after-free the dentry when CONFIG_OVERLAY_FS_DEBUG is enabled. Print the dentry before the call and only the result afterward.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing alloc tagging of direct mempool allocations Commit 1d78d56c43ef ("netfsCVE-2026-98920 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing alloc tagging of direct mempool allocations Commit 1d78d56c43ef ("netfs: Fix folio_queue ENOMEM in writeback by adding a mempool") added a mempool for the folio_queues and made the request, subrequest and folio_queue allocations distinguish between writeback and everything else. Writeback is part of memory reclaim and must not fail due to ENOMEM, so it allocates under GFP_NOFS through mempool_alloc(), which may dip into the pool's reserve and, if that runs empty, wait for elements to be returned. The GFP_KERNEL paths, which can return -ENOMEM to their callers, invoke the pool's ->alloc() callback directly instead. The direct call, however, skips the alloc_hooks() wrapper that the mempool_alloc() macro provides. The pool callbacks, mempool_alloc_slab() and mempool_kmalloc(), call kmem_cache_alloc_noprof() and kmalloc_noprof() and rely on current->alloc_tag having been set by the caller. With CONFIG_MEM_ALLOC_PROFILING_DEBUG=y this leads to current->alloc_tag not set WARNING: ./include/linux/alloc_tag.h:161 at __alloc_tagging_slab_alloc_hook alloc_tag was not set WARNING: ./
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: drm/xe: harden adjust_idledly() against divide-by-zero and overflow adjust_idledly() has sCVE-2026-98919 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/xe: harden adjust_idledly() against divide-by-zero and overflow adjust_idledly() has several corner-case issues flagged during review: 1. If xe_gt_clock_init() failed to recognise the crystal clock, gt->info.timestamp_base is 0, which makes idledly_units_ps also 0. The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a divide-by-zero and panics the kernel. 2. The tick-to-ns conversions are done in u32: idledly * idledly_units_ps, (maxcnt - 1) * 1000 Both overflow u32 before DIV_ROUND_CLOSEST() sees them. 3. If IDLE_WAIT_TIME reads back as 0, maxcnt evaluates to 0 and the maxcnt - 1 clamp wraps to 0xFFFFFFFF in u32. 4. The register only stores whole ticks, so the clamped ns value has to be converted to ticks and back. DIV_ROUND_CLOSEST() can round that conversion up past maxcnt: maxcnt = 640 ns, one tick = 666664 ps clamp: maxcnt - 1 = 639 ns ns -> ticks: 639000 / 666664 = 0.958 -> rounds to 1 tick tick -> ns: 1 * 666664 / 1000 = 667 ns 667 ns is programmed into RING_IDLEDLY, but 667 >= max
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 23, 2026In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold() __damon_va_prepare_aCVE-2026-98918 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: mm/damon/ops-common: use a page-aligned address in damon_ptep_mkold() __damon_va_prepare_access_check() picks a random byte address within the region and stores it in r->sampling_addr. damon_va_mkold() passes it into a page table walk, which hands it to damon_ptep_mkold() as the address of the page to sample: damon_va_mkold(mm, r->sampling_addr) damon_va_walk_page_range(mm, addr, addr + 1) damon_mkold_pmd_entry() damon_ptep_mkold(pte, vma, addr) ptep_test_and_clear_young(vma, addr, pte) mmu_notifier_clear_young(mm, addr, addr + PAGE_SIZE) For arm64, before commit 6f0e1142173a ("arm64: mm: support batch clearing of the young flag for large folios"), the contpte helper walked exactly CONT_PTES entries from the aligned-down page table pointer and used @addr only to pass down to each entry, so an unaligned value was harmless: ptep = contpte_align_down(ptep); addr = ALIGN_DOWN(addr, CONT_PTE_SIZE); for (i = 0; i < CONT_PTES; i++, ptep++, addr += PAGE_SIZE) Now the range to walk is derived from @addr instead: end = addr + nr * PAGE_SIZE, rounded up to
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.