Updated 6 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,766exploited flaws on CISA’s list

35added in the last 30 days

575new WordPress flaws this week

391,358entries in the database

21,993 results · page 58 of 440

Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Propagate partial completion length across ERP recovery dasd_default_erp_postacCVE-2026-89456 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7
In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Propagate partial completion length across ERP recovery dasd_default_erp_postaction() copies the timing and device state from the finished ERP request back to the original request but drops proc_bytes. A request that was partially completed, an ESE read of a not-yet-allocated track returns fewer bytes than requested, and then recovered through the ERP chain loses its partial-completion length. __dasd_cleanup_cqr() then sees proc_bytes == 0 and completes the whole request instead of requeueing the remainder, silently returning zeroed data for the part that was never read. Carry proc_bytes over to the original request like the other per-request state.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: PCI: plda: Fix use-after-free of event IRQs during teardown plda_pcie_irq_domain_deinit() CVE-2026-89455 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: PCI: plda: Fix use-after-free of event IRQs during teardown plda_pcie_irq_domain_deinit() removes pcie->event_domain via irq_domain_remove(), but the per-event IRQs mapped from that domain are requested with devm_request_irq() in plda_init_interrupts(). The actual free_irq() for a devm-managed IRQ is deferred by devres until after the calling probe()/remove() function returns. This means irq_domain_remove() can free the domain's internal data before the deferred free_irq() for IRQs still mapped into it has run. When devres later processes that deferred cleanup, it can end up dereferencing the already-freed domain. Free each event IRQ explicitly with devm_free_irq() before removing the domain. This triggers the free immediately and removes the IRQ from the devres tracking list, so devres will not attempt to free it a second time later. Also dispose of the event, INTx, and MSI IRQ mappings with irq_dispose_mapping() before their owning domains are removed. Finally, guard the calls to irq_set_chained_handler_and_data() for pcie->irq, pcie->msi_irq, and pcie->intx_irq so they only run when those fields hold a val
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: PCI: plda: Fix IRQ domain leaks in the error paths of plda_init_interrupts() plda_init_intCVE-2026-89454 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: PCI: plda: Fix IRQ domain leaks in the error paths of plda_init_interrupts() plda_init_interrupts() initializes IRQ domains and creates IRQ mapping but does not unwind them when later step fails. If platform_get_irq() or either irq_create_mapping() fails in plda_init_interrupts(), the domains are never deinitialized. If irq_create_mapping() fails, port->intx_irq stays initialized. Hence, remove the IRQ domains in the error path by calling plda_pcie_irq_domain_deinit(). Since plda_pcie_irq_domain_deinit() now disposes of the intx_irq and msi_irq mappings itself before removing their domains, the msi_irq mapping failure path can go directly to err_irq_domain_deinit instead of disposing of port->intx_irq separately first. This issue was found by automated review of sashiko-bot [mani: commit log]
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Put PCI device after handling PPR faults iommu_call_iopf_notifier() looks up thCVE-2026-89453 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Put PCI device after handling PPR faults iommu_call_iopf_notifier() looks up the requester with pci_get_domain_bus_and_slot(), which returns a PCI device with its reference count incremented. Neither the successful iommu_report_device_fault() path nor the abort path drops that reference, so every handled PPR request leaks a PCI device reference. This is the same ownership rule that was fixed for the old iommu_v2 ppr_notifier() path by commit 6cf0981c2233 ("iommu/amd: Fix pci device refcount leak in ppr_notifier()"), but iommu_call_iopf_notifier() was added later as a separate PPR/IOPF notifier path. Drop the PCI device reference after handling the PPR entry.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/msm: Unwind probe state on registration failure msm_iommu_probe() adds its devm-manaCVE-2026-89452 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4
In the Linux kernel, the following vulnerability has been resolved: iommu/msm: Unwind probe state on registration failure msm_iommu_probe() adds its devm-managed IOMMU object to qcom_iommu_devices before adding the IOMMU sysfs device and registering it with the IOMMU core. If iommu_device_sysfs_add() fails, probe returns with the object still on qcom_iommu_devices. The driver core then releases the devm allocation, leaving a dangling list entry that later list walks may dereference. If iommu_device_register() fails, the same dangling list entry remains and the sysfs device is left registered as well. Unwind the sysfs device and global list entry in reverse setup order on the corresponding failure paths.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/sva: Set handle->dev before the SVA handle is visible iommu_attach_device_pasid() inCVE-2026-89451 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: iommu/sva: Set handle->dev before the SVA handle is visible iommu_attach_device_pasid() installs the new SVA attach handle in the group PASID lookup before iommu_sva_bind_device() returns. A concurrent bind can therefore find and reuse the same handle after iommu_sva_lock is dropped. handle->dev was initialized after dropping iommu_sva_lock. This leaves a window where a racing bind can return a handle whose dev pointer is still NULL. A subsequent iommu_sva_unbind_device() can then dereference it via handle->dev->iommu_group. Initialize handle->dev before releasing iommu_sva_lock so any visible SVA handle is fully initialized.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Reject a vSID wider than the SID_MATCH field tegra241_vintf_init_vsiCVE-2026-89450 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Reject a vSID wider than the SID_MATCH field tegra241_vintf_init_vsid() programs the guest-provided vSID into SID_MATCH, whose VIRT_SID field spans bits [20:1] with bit 0 as the match-enable flag. The HW therefore matches only a 20-bit Stream ID. The bound check rejects only virt_sid > UINT_MAX, which admits a value far wider than the field. The write "virt_sid << 1 | 0x1" then drops every bit above 20: a virt_sid of 0x80000000 lands as SID_MATCH = 0x1, a valid match on vSID 0, so the entry aliases the wrong Stream ID. Because vdev->virt_id is guest-controlled, a VMM can trigger it. Validate virt_sid against the field width with FIELD_MAX(), and program the register with FIELD_PREP() so the value and the field stay consistent.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add iommu_mockCVE-2026-89449 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: iommu: Fix dev_iommu memory leak when device_add fails in iommu_mock_device_add iommu_mock_device_add() first calls iommu_fwspec_init(), which on success allocates both dev->iommu (via dev_iommu_get()) and dev->iommu->fwspec. If the subsequent device_add(dev) call fails, the error path only calls iommu_fwspec_free(dev), which frees fwspec but leaves dev->iommu still allocated. This triggers the following kmemleak report when fuzzing with Syzkaller: BUG: memory leak unreferenced object 0xffff888011e0a200 (size 192): comm "syz.1.1695", pid 24885, jiffies 4295222527 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N.. ff ff ff ff 00 00 00 00 ff ff ff ff ff ff ff ff ................ backtrace (crc 25df5bb3): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4575 [inline] slab_alloc_node mm/slub.c:4899 [inline] __kmalloc_cache_noprof+0x47a/0x710 mm/slub.c:5415 kmalloc_noprof include/linux/slab.h:950 [inline] kzalloc_noprof include/linux/slab.h:1188 [inline] dev_iommu_get+0x10c/0x1a0 drivers/i
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Force requesting ACS when tboot is enabled Currently the conditions of requestCVE-2026-89448 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.3
In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Force requesting ACS when tboot is enabled Currently the conditions of requesting ACS in detect_intel_iommu() don't include tboot, leading to a possible misconfiguration with ACS disabled (e.g. due to user opts) while iommu is later forced on by tboot_force_iommu(). Fix it by checking tboot in detect_intel_iommu().
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: iommufd: Avoid locking internal accesses during unmap iommufd_access_notify_unmap() skips CVE-2026-89447 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: iommufd: Avoid locking internal accesses during unmap iommufd_access_notify_unmap() skips internal accesses because they do not have an external unmap callback to invoke. However, the current test calls iommufd_lock_obj() before checking whether the access is internal. If iommufd_lock_obj() succeeds, the loop then sees the internal access and continues, bypassing the matching iommufd_put_object() used by the normal unmap path. This leaks the object reference taken by iommufd_lock_obj(). Check for internal accesses first so skipped entries are never locked.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: iommufd: Release current IOAS on xa_store() failure iommufd_take_all_iova_rwsem() takes anCVE-2026-89446 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: iommufd: Release current IOAS on xa_store() failure iommufd_take_all_iova_rwsem() takes an object reference and the iova_rwsem write lock before storing the IOAS in the temporary ioas_list xarray. If xa_store() fails, the current IOAS has not been inserted into ioas_list yet. iommufd_release_all_iova_rwsem() only unwinds IOAS objects already present in that xarray, so it cannot release the current IOAS. Release the current IOAS rwsem and object reference before unwinding the previously stored entries.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix UAF in selftest IOPF reporting IOMMUFD selftest TRIGGER_IOPF borrows an attacCVE-2026-89445 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix UAF in selftest IOPF reporting IOMMUFD selftest TRIGGER_IOPF borrows an attach handle from group->pasid_array without synchronizing against PASID detach, then a concurrent iommu_report_device_fault() can dereference that borrowed handle's domain pointer after the detach erases the handle and frees the backing struct iommufd_attach_handle. TRIGGER_IOPF then dereferences the freed handle, causing a UAF. Fix by adding a iopf_rwsem in mock_dev to follow the expected design of a real driver. Hold its read side across the whole iommu_report_device_fault() call, and its write side around every path that attaches, detaches, or replaces a device domain. This can block new reports and drains in-flight reports before an old attach handle or the IOPF fault parameter can be removed. Also take the write side while registering a mock device, since it can invoke the mock driver's default-domain attach callback.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Don't hex dump attribute security buffer set_attribute() poCVE-2026-89444 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Don't hex dump attribute security buffer set_attribute() populates the security area of the BIOS attribute request buffer with the current admin password via populate_security_buffer(), then dumps the whole request buffer with print_hex_dump_bytes(). This can expose the plaintext admin password in the kernel log. The same issue was fixed for the password attribute path by commit d1a196e0a6dc ("platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data"). Remove the remaining dump from the BIOS attribute path.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate level in perf mask ioctls isst_if_get_perf_level_mask() and iCVE-2026-89443 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate level in perf mask ioctls isst_if_get_perf_level_mask() and isst_if_get_base_freq_mask() use the user-provided level as an index into perf_levels[] via _read_pp_level_info() and _read_bf_level_info(), but neither helper validates it first. The adjacent level-info helpers reject levels above max_level before reading the same per-level register block. Add the same bounds checks to the mask helpers, and reject disabled SST-PP levels in isst_if_get_perf_level_mask() to match isst_if_get_perf_level_info(). This prevents out-of-bounds reads from the per-level offset table on invalid ioctl input.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate socket ID in clos_assoc ioctl isst_if_clos_assoc() validates CVE-2026-89442 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate socket ID in clos_assoc ioctl isst_if_clos_assoc() validates the user-supplied socket_id with 'socket_id > topology_max_packages()', but isst_common.sst_inst[] is allocated with topology_max_packages() entries, so the valid index range is [0, topology_max_packages()). The '>' comparison lets socket_id == topology_max_packages() pass and index one entry past the array. In addition, isst_common.sst_inst[socket_id] is NULL for an in-range package that has no bound TPMI SST instance, and the pointer is used without a NULL check. Both the out-of-bounds entry and the NULL pointer are then dereferenced by map_partition_power_domain_id() and the following power_domain_info access. Reject socket_id >= topology_max_packages() and a NULL sst_inst, matching the checks already performed by get_instance().
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: cancel card-detect work on remove Disabling the device interrupt and freeiCVE-2026-89441 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: cancel card-detect work on remove Disabling the device interrupt and freeing the IRQ prevents new card-detect work from being queued, but carddet_work already queued by the handler can still run after via_sd_remove() returns. via_sdc_card_detect() recovers the host through container_of() and dereferences its MMIO base; once remove() returns the host can be freed, so that work would touch freed memory. Cancel carddet_work after freeing the IRQ and before cancelling finish_bh_work, which the card-detect handler can also queue. carddet_work can re-enable the interrupt through via_reset_pcictrl(); mask it again afterwards. This issue was found by an in-house static analysis tool and confirmed by manual code review.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: stop card-detect handling on probe failure request_irq() registers the SD CVE-2026-89440 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: stop card-detect handling on probe failure request_irq() registers the SD card-detect interrupt and the probe enables it before mmc_add_host() runs. If mmc_add_host() fails, the error path only unmaps the registers and returns: the interrupt stays registered, so the handler keeps running against the host once it is freed. via_sdc_isr() dereferences sdhost and its MMIO base and schedules carddet_work, which via_sdc_card_detect() also runs against freed memory through its container_of() dereference. Add a probe-error path that disables and frees the interrupt and cancels carddet_work before unmapping. carddet_work can re-enable the device interrupt via via_reset_pcictrl(), which restores PCIINTCTRL, so mask it again after cancelling the work. This issue was found by an in-house static analysis tool and confirmed by manual code review.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Add a NULL check for sst_inst[] To be consistent with other places, adCVE-2026-89439 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Add a NULL check for sst_inst[] To be consistent with other places, add a NULL check for failed socket loading by checking isst_common.sst_inst[].
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate logical CPU id and clos id Validate max CLOS ID and logical CCVE-2026-89438 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Validate logical CPU id and clos id Validate max CLOS ID and logical CPU ID for core power feature. Reject any clos level or logical CPU number greater than the supported maximum. These are used to calculate MMIO offset.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: int1092: Fix potential memory leak in sar_probe() The memory allocated for dCVE-2026-89437 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: platform/x86: int1092: Fix potential memory leak in sar_probe() The memory allocated for device_mode_info in parse_package() called by sar_get_data() is not freed in some of the error paths in sar_probe(). Fix that by converting to use device managed allocations.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: panasonic-laptop: Fix sentinel write past pcc->sinf[] acpi_pcc_retrieve_biosCVE-2026-89436 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: platform/x86: panasonic-laptop: Fix sentinel write past pcc->sinf[] acpi_pcc_retrieve_biosdata() rejects SINF packages only when pcc->num_sifr is strictly less than hkey->package.count, then unconditionally writes a trailing sentinel at pcc->sinf[hkey->package.count]. But pcc->sinf[] is allocated with exactly pcc->num_sifr elements (valid indices 0..num_sifr-1), so that write needs num_sifr strictly greater than package.count to stay in bounds -- num_sifr == package.count passes the existing check but still overflows by one element. This is exactly the case probe()'s existing num_sifr++ workaround ("Some DSDT-s have an off-by-one bug where the SINF package count is one higher than the SQTY reported value") is written to accommodate: when a DSDT's SINF package count equals SQTY+1, the workaround makes num_sifr equal to package.count, which is precisely the boundary that overflows here. Found via UBSan (array-index-out-of-bounds) on hardware where HKEY.SQTY returns 37 and HKEY.SINF()'s package has 38 elements: num_sifr becomes 38 after the += 1 workaround, the loop correctly fills indices 0..37, and the sentinel w
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Free system certificate signatures Multi-certificate support alsoCVE-2026-81018 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: platform/x86: think-lmi: Free system certificate signatures Multi-certificate support also allows the system authentication object to store ->signature and ->save_signature, which leak when the driver is removed. Free the signatures to avoid leaking memory.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Bound the EC-reported sensor number Each EC FIFO event carriesCVE-2026-81017 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4
In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Bound the EC-reported sensor number Each EC FIFO event carries an 8-bit sensor number (in->sensor_num). cros_ec_sensorhub_ring_handler() validates the FIFO event count, the per-read count and the ring bound, but not the sensor number, which cros_ec_sensor_ring_process_event() then uses unchecked to index sensorhub->batch_state[] - allocated with only sensorhub->sensor_num entries. A sensor number of sensor_num or larger is an out-of-bounds read and write of batch_state[]. Validate the sensor number in the ring handler, where each event is read from the EC, and drop a malformed event before it is used.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Propagate SMU errors and validate S2D address amd_stb_s2d_init() disCVE-2026-81016 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.7
In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Propagate SMU errors and validate S2D address amd_stb_s2d_init() discards the return value of several S2D SMU commands. When the SMU refuses a command (e.g. "SMU cmd failed. err: 0xff") the failure is only noticed indirectly - if at all - and reported as -EIO, masking the real error. More seriously, the S2D_PHYS_ADDR_LOW/HIGH return values are ignored, so on failure phys_addr_low/hi are left uninitialised and the assembled address is passed straight to devm_ioremap(). When the SMU leaves them at zero this maps physical address 0 and trips the ioremap-on-RAM warning: amd_pmc AMDI000B:00: SMU cmd failed. err: 0xff ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff WARNING: CPU: 13 PID: 4592 at arch/x86/mm/ioremap.c:... Check the return value of each SMU command and propagate it, and reject a zero physical address before calling devm_ioremap().
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Fix LPS0 and debugfs leaks when STB init fails amd_pmc_probe() regisCVE-2026-81015 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Fix LPS0 and debugfs leaks when STB init fails amd_pmc_probe() registers the LPS0 s2idle handler with acpi_register_lps0_dev() and creates the driver's debugfs directory before calling amd_stb_s2d_init(), which is the last step in probe that can fail. When amd_stb_s2d_init() fails (for example the S2D telemetry region cannot be ioremapped on a long-running system, or the SMU rejects the S2D setup) the error path only calls pci_dev_put() and returns. This leaves amd_pmc_s2idle_dev_ops on the global lps0_s2idle_devops_head list and leaks the debugfs directory, while the devm-managed resources backing the handler are torn down. Reloading the module then walks the corrupted list in acpi_register_lps0_dev() and hits: list_add corruption. next->prev should be prev, but was NULL. kernel BUG at lib/list_debug.c:29! acpi_register_lps0_dev+0x44/0x80 amd_pmc_probe+0x224/0x380 [amd_pmc] platform_probe+0x67/0x90 Even without a reload, the stale registration means the next s2idle transition calls into torn-down driver state. Unwind the debugfs directory and the LPS0 registration on the
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix heap OOB read in sk_store() and kek_store() sk_store() and kCVE-2026-81014 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix heap OOB read in sk_store() and kek_store() sk_store() and kek_store() strip a trailing newline from the sysfs write before allocating the key buffer: length = count; if (buf[length - 1] == '\n') length--; bioscfg_drv.spm_data.signing_key = kmemdup(buf, length, GFP_KERNEL); but then pass the original "count" (not "length") as the copy size to hp_wmi_perform_query(), which memcpy()s that many bytes out of the "length"-sized allocation, reading one byte past it whenever the write ends in a newline, the normal case for a shell "echo" into sysfs. KASAN confirms this directly: BUG: KASAN: slab-out-of-bounds in hp_wmi_perform_query+0x1e9/0x460 [hp_bioscfg] Read of size 28 at addr ffff88813c8e2b80 by task python3/16022 ... sk_store+0xa7/0x240 [hp_bioscfg] kernfs_fop_write_iter+0x3e1/0x5d0 ... The buggy address is located 0 bytes inside of allocated 27-byte region [ffff88813c8e2b80, ffff88813c8e2b9b) Reproduced identically for kek_store, and at multiple write sizes (28, 57, 201 bytes), each time reading exactly one byte past a kmemdup() allocation one byte smaller t
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix heap OOB read on empty password write validate_password_inpuCVE-2026-81013 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix heap OOB read on empty password write validate_password_input() computes length = strlen(buf) and then checks buf[length - 1] to strip a trailing newline, without checking that length is nonzero first. Writing an empty string (a bare '\n') to current_password or new_password gives length == 0, and buf[length - 1] reads buf[-1], one byte before the heap allocation holding the copied input. KASAN confirms this directly: BUG: KASAN: slab-out-of-bounds in store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg] Read of size 1 at addr ffff88811bd8da9f by task sh/13740 ... store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg] current_password_store+0x14/0x20 [hp_bioscfg] ... The buggy address is located 23 bytes to the right of allocated 8-byte region [ffff88811bd8da80, ffff88811bd8da88) Reproduced identically via new_password_store. Execution continues past the bad read (the garbage byte only affects whether "length" is decremented by one), so the write completes and returns success; this is a pure information read past the buffer, not a crash, but it is stil
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix off-by-one write in hp_get_string_from_buffer() hp_get_strinCVE-2026-81012 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4
In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix off-by-one write in hp_get_string_from_buffer() hp_get_string_from_buffer() clamps the converted string length against the destination buffer size with "size > dst_size", so when the converted length is exactly equal to dst_size, conv_dst_size is left at dst_size and the unconditional NUL terminator write dst[conv_dst_size] = 0; lands one byte past the destination buffer. This is the same shape of bug as the previously fixed off-by-one in hp_convert_hexstr_to_str(): the buffer is sized correctly for the content, but the terminator write is never checked against that size. Fix by changing the comparison to ">=" so conv_dst_size is always left with room for the terminator. All fixed-size destinations that reach this function (path[512], current_value[512], current_password/current_value[64], and the per-entry buffers in encodings[][512] and prerequisites[][512]) are affected.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: pass validated element count to package parsers The per-type pacCVE-2026-81011 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: pass validated element count to package parsers The per-type package parsers are handed the wrong element count. hp_init_bios_package_attribute() validates obj->package.count and then calls one of the five hp_populate_*_package_data() wrappers (string, integer, enumeration, ordered list, password). Each wrapper forwards a count to its hp_populate_*_elements_from_package() parser, but instead of forwarding the validated obj->package.count it derives the count from elements[0]. elements[0] is the NAME field and is always an ACPI_TYPE_STRING, so reading ->package.count from it in fact reads ->string.length through the union acpi_object. The parsers thus bound themselves against the length of the name string rather than against the real number of elements in the package. This is safe today because hp_init_bios_package_attribute() refuses any package that has fewer than the type's element count, so a parser only ever runs on a full package and never reads past it regardless of the bogus bound. An upcoming change relaxes that check to accept shorter packages. Once a parser can receive fewer
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: io_uring/waitid: honor task_work cancellation io_waitid_cb() may run through the fallback CVE-2026-81010 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: io_uring/waitid: honor task_work cancellation io_waitid_cb() may run through the fallback task_work path when task_work_add() can no longer queue work to the originating task. The fallback runs from a kworker and io_uring marks such task work as canceled through tw.cancel. io_waitid_cb() currently ignores tw.cancel and calls __do_wait(). waitid is task-context dependent: __do_wait() performs child lookup relative to current, and the retry path also uses current->signal->wait_chldexit. If the callback runs from the fallback kworker, current is therefore not the task that submitted the request. Honor tw.cancel before entering __do_wait(). Complete the request with -ECANCELED and skip the siginfo copy, since canceled task work may run without the submitting task's userspace execution context. Keep the existing siginfo handling for normal waitid completion and explicit cancellation.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: io_uring/query: cap user size passed to copy_struct_to_user io_handle_query_entry() clampsCVE-2026-81009 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: io_uring/query: cap user size passed to copy_struct_to_user io_handle_query_entry() clamps hdr.size for the inbound copy_from_user() but keeps the original user value as usize. copy_struct_to_user() uses that usize and, when it is larger than the kernel result, clear_user()s the trailing bytes. As hdr.size is a __u32, a query can request nearly 4 GiB of zeroing, including on the error path where res_size stays 0. The interface is reachable without a ring via IORING_REGISTER_QUERY. Reject sizes larger than PAGE_SIZE, as recommended for copy_struct_* interfaces.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: interconnect: Fix use after free in icc_get() and of_icc_get_by_index() In of_icc_get_by_iCVE-2026-81008 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: interconnect: Fix use after free in icc_get() and of_icc_get_by_index() In of_icc_get_by_index() and icc_get(), if the dynamic allocation for path->name fails via kasprintf(), the error handling path directly calls kfree(path) to free the path object and returns an error. However, prior to this point, path_find() calls path_init(), which already links the path's requests into the req_list of the respective interconnect nodes via hlist_add_head(). Directly invoking kfree(path) leaves dangling pointers in the hlist. A subsequent call to icc_get() or icc_set_bw() will traverse or modify these corrupted lists, triggering a slab use afterfree. KASAN report showing the vulnerability when reproducing via debugfs: BUG: KASAN: slab-use-after-free in path_find+0x6f8/0xcfc Write of size 8 at addr fff000000d43f748 by task sh/1 ... Call trace: kasan_report+0xac/0xfc path_find+0x6f8/0xcfc icc_get+0x148/0x380 icc_get_set+0xf8/0x2d0 ... Freed by task 1: kfree+0x1a0/0x4a4 icc_get+0x2cc/0x380 icc_get_set+0xf8/0x2d0 Fix this by replacing kfree(path) with the proper teardown function, icc_put(pat
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ipmi: ipmb: validate write message length ipmb_write() read message fields before validatiCVE-2026-81007 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: ipmi: ipmb: validate write message length ipmb_write() read message fields before validating the length byte. A zero or short write can read uninitialized stack bytes. A length smaller than the SMBus header underflows the block write length. Require a non-empty buffer and the minimum IPMB request length. Also require the length byte plus payload before parsing the message.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ipmi: Remove all sysfs files on registration failure ipmi_add_smi() creates the nr_users aCVE-2026-81006 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: ipmi: Remove all sysfs files on registration failure ipmi_add_smi() creates the nr_users and nr_msgs files before trying to create the maintenance_mode file. If that last creation fails, the error path removes only nr_users before dropping the final reference to the interface. Remove nr_msgs as well so no sysfs attribute embedded in the freed interface remains registered.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ipmi: si: Fix NULL pointer dereference after failed registration try_smi_init() allocates CVE-2026-81005 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: ipmi: si: Fix NULL pointer dereference after failed registration try_smi_init() allocates new_smi->si_sm and later calls ipmi_register_smi_mod(), which maps to ipmi_add_smi(). During ipmi_add_smi(), the upper IPMI message handler obtains the initial BMC device information through __bmc_get_device_id(). This can fail if the BMC does not return a successful response to the Get Device ID command. When the BMC returns a nonzero completion code, the device-id helper retries the command and eventually returns -EIO if the device ID still cannot be fetched. On this failure path, ipmi_add_smi() logs "Unable to get the device id" and goes to out_err_started, where it invokes the lower driver's shutdown callback. try_smi_init() then logs the returned registration failure: ipmi_si IPI0001:00: IPMI message handler: Unable to get the device id: -5 ipmi_si IPI0001:00: Unable to register device: error -5 For ipmi_si, the shutdown callback is shutdown_smi(), which cleans up the SI state machine data, frees smi_info->si_sm, and sets smi_info->si_sm and smi_info->intf to NULL. However, intf->in_shutdown is not set on this f
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ipmi:msghandler: Cancel work cleanly on an error If an error occurs during startup of an ICVE-2026-81004 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4
In the Linux kernel, the following vulnerability has been resolved: ipmi:msghandler: Cancel work cleanly on an error If an error occurs during startup of an IPMI interface, it may have scheduled work to run. The work needs to be canceled before the interface can be freed.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net/iucv: filter frames in afiucv_hs_rcv() by ingress device afiucv_hs_rcv() selects a socCVE-2026-81003 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1
In the Linux kernel, the following vulnerability has been resolved: net/iucv: filter frames in afiucv_hs_rcv() by ingress device afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte name fields in the transport header alone. No check is made against the net_device the frame arrived on. This can cause a frame arriving on any netdev to be delivered to an AF_IUCV socket. Three problems follow. First, a frame arriving over HiperSockets can be delivered to a socket bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL. iucv_sock_bind() takes the classic path whenever the requested userid matches iucv_userid, even on a guest that also has a HiperSockets device carrying the same identifier. The child socket created by afiucv_hs_callback_syn() for such a match inherits hs_dev = NULL and transport = AF_IUCV_TRANS_HIPER, so the first send() on it returns -ENODEV. The socket delivered to accept() is unusable. Second, a frame arriving on one netdev can be delivered to a socket bound to a different IQD device. Which can lead to - Accept-queue exhaustion (DoS) - Attacker-controlled peer identity in the child socket - Data injection into existing sock
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: xdp: fix zero-copy frame layout xdp_convert_zc_to_xdp_frame() clones an XSK packet into anCVE-2026-81002 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8
In the Linux kernel, the following vulnerability has been resolved: xdp: fix zero-copy frame layout xdp_convert_zc_to_xdp_frame() clones an XSK packet into an order-0 page and advertises PAGE_SIZE as its frame size. It allows the copied frame to occupy the page tail needed by skb_shared_info and records zero headroom even when metadata separates the frame header from packet data. An AF_XDP zero-copy packet redirected through cpumap can therefore make the skb overlap skb_shared_info or place it beyond the allocated page. Limit the copied layout to SKB_WITH_OVERHEAD(PAGE_SIZE) and include the metadata length in frame headroom. Redirect callers already handle a NULL conversion result. BUG: KASAN: slab-out-of-bounds in skb_gro_receive Write of size 4 at addr ffff88800cf37004 by task cpumap/1/map:1/146 Call Trace: skb_gro_receive (net/core/gro.c:174) udp_gro_receive (net/ipv4/udp_offload.c:812) inet_gro_receive (net/ipv4/af_inet.c:1539) dev_gro_receive (net/core/gro.c:515) gro_receive_skb (net/core/gro.c:633) cpu_map_kthread_run (kernel/bpf/cpumap.c:395) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: slip: fix use-after-free in sl_sync() slip_devs[] stores bare net_device pointers and takeCVE-2026-81001 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: slip: fix use-after-free in sl_sync() slip_devs[] stores bare net_device pointers and takes no reference on them. sl_sync() and sl_alloc() walk that table from slip_open() under rtnl_lock(), while an entry is dropped by sl_free_netdev(), which sl_setup() installs as dev->priv_destructor. priv_destructor is called from netdev_run_todo(), which deliberately runs with the RTNL semaphore released so that it can sleep while waiting for the device refcount to drop: /* Snapshot list, allow later requests */ list_replace_init(&net_todo_list, &list); __rtnl_unlock(); ... if (dev->priv_destructor) dev->priv_destructor(dev); /* slip_devs[i] = NULL */ if (dev->needs_free_netdev) free_netdev(dev); ... /* Free network device */ kobject_put(&dev->dev.kobj); So rtnl_lock() does not serialise slip_open() against the teardown at all. sl_sync() can load slip_devs[i] while the entry is still published and dereference it after netdev_run_todo() has run the destructor and released the device: CPU0 (slip_open) CPU1 (slip_close) unregister_netdev()
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: tun: bound receive headroom tun_get_user() uses tun->align both as skb headroom and wCVE-2026-81000 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net: tun: bound receive headroom tun_get_user() uses tun->align both as skb headroom and when choosing how much packet data to keep linear. OVS can propagate an oversized headroom request from another port to TUN or TAP. When align is larger than the usable space in a one-page skb head, SKB_MAX_HEAD(align) underflows and the result becomes negative when stored in good_linear. That value later wraps when assigned to the size_t linear variable, and tun_alloc_skb() can place skb->data outside the allocated head. Bound the headroom stored by TUN to the one-page skb-head budget and the largest non-sentinel 16-bit skb header offset. Leave one linear byte for raw TUN and a complete Ethernet header for TAP, including NET_IP_ALIGN. Also pull the raw-TUN protocol byte and the TAP Ethernet header before accessing them, so these checks remain safe for nonlinear skbs supplied by other allocation paths.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO rtl83xx_reset_assert() and CVE-2026-80999 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from the probe path, which may sleep and is not timing-critical. When the reset GPIO is provided by a sleeping controller such as an I2C I/O expander, gpiod_set_value() warns: WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61 Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT) Workqueue: events_unbound deferred_probe_work_func pc : gpiod_set_value+0x44/0x80 lr : rtl83xx_probe+0x1d8/0x3a0 Call trace: gpiod_set_value+0x44/0x80 (P) rtl83xx_probe+0x1d8/0x3a0 realtek_mdio_probe+0x24/0xa0 mdio_probe+0x38/0x78 really_probe+0xc4/0x3e0 __driver_probe_device+0x15c/0x1b8 driver_probe_device+0xb4/0x120 __device_attach_driver+0xb8/0x1a0 bus_for_each_drv+0x88/0xf0 __device_attach+0xa0/0x1d8 device_initial_probe+0x54/0x68 bus_probe_device+0x38/0xa0 deferred_probe_work_func+0xb8/0x120 process_one_work+0x184/0x4e8 worker_thread+0x188/0x308 kthread+0x130/0x150 ret_from_fork+0x10/0x20 Switch both help
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: bnxt: ring the doorbell when SW USO exits early When a burst of packets is handed dowCVE-2026-80998 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: net: bnxt: ring the doorbell when SW USO exits early When a burst of packets is handed down to the driver, the driver defers the doorbell to the end by setting txr->kick_pending = 1. The normal TX path handles this, but the SW USO path can miss it if it returns early. If bnxt_sw_udp_gso_xmit runs but returns early with NETDEV_TX_BUSY and txr->kick_pending was previously set to 1, then the TX queue can stall because the driver wrote some BDs but never wrote the doorbell. The device won't know to do the TX which would generate the completion that would wake the queue back up. Simplify bnxt_sw_udp_gso_xmit to set txr->kick_pending in its success case and check the flag on return. The added check after bnxt_sw_udp_gso_xmit returns ensures that any pending doorbells are written handling both successful USO and any early returns, which prevents the TX queue stall mentioned above. This TX queue stall was observed on a production system with a netdev TX watchdog informing about the queue stall.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: ipa: fix stalled modem TX queue after runtime resume ipa_start_xmit() unconditionallyCVE-2026-80997 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: net: ipa: fix stalled modem TX queue after runtime resume ipa_start_xmit() unconditionally stops the TX queue before calling pm_runtime_get(), relying on the wake scheduled by runtime resume (ipa_modem_wake_queue_work()) to restart it once power is ACTIVE. But that work is queued from within the runtime resume callback, before the device's power state reaches RPM_ACTIVE, so it can run while the device is still RPM_RESUMING. The wake is then consumed too early: the transmit it restarts stops the queue again, pm_runtime_get() returns -EINPROGRESS without arranging any future wake (deferred_resume exists only for RPM_SUSPENDING), and after the resume completes nothing is left to wake the queue. Transmit stalls permanently: packets pile up in the qdisc behind the stopped queue, the device runtime-suspends, and since the netdev registers no ndo_tx_timeout the watchdog never fires. Observed on SM7635 (Fairphone 6) as the cellular data path going permanently deaf within hours, RX included, since nothing resumes the suspended endpoints. Close the window by making the wake work wait for the resume to complete (pm_runt
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: l2tp: do not propagate multicast notification errors The tunnel create, tunnel modifyCVE-2026-80996 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: l2tp: do not propagate multicast notification errors The tunnel create, tunnel modify, session create, and session modify netlink handlers send multicast notifications through helpers that can fail while allocating or encoding a message, or while multicasting it. For tunnel and session create/modify, a notification is sent after the live operation has completed. Returning a best-effort notification error as the command result can therefore report failure for an operation that already committed and can cause callers to retry and accumulate live objects. Keep sending notifications for listener visibility, but do not propagate their best-effort status as the command result. This also keeps the tunnel modify command consistent with the other notification-only paths.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: mctp: hold a reference to the route device in mctp_route_lookup() mctp_route_lookup()CVE-2026-80995 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net: mctp: hold a reference to the route device in mctp_route_lookup() mctp_route_lookup() uses rt->dev without holding a reference on it. mctp_route_lookup_single() returns the route under RCU only, so the route's device can be torn down concurrently: mctp_dev_put() drops the last reference and synchronously kfree()s mdev->addrs. mctp_dev_saddr() then reads rt->dev->addrs[0], giving a use-after-free reachable by an unprivileged local AF_MCTP user on the receive/forwarding path (no CAP_NET_RAW required): BUG: KASAN: slab-use-after-free in mctp_route_lookup Read of size 1 at addr ... by task mctp_uaf/... mctp_route_lookup mctp_pkttype_receive Freed by task ...: kfree mctp_dev_put mctp_dev_notify In the same window mctp_dst_from_route() -> mctp_dev_hold() also increments a refcount that has already reached zero ("refcount_t: addition on 0 ... mctp_dev_hold"). This reintroduces the use-after-free class of CVE-2023-3439: the source address lookup was moved ahead of the point where the destination takes its device reference. Take a reference with refcount_inc_not_zero() before touching rt->de
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix flow mask use-after-free on flow deletion The commit in the Fixes taCVE-2026-80994 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix flow mask use-after-free on flow deletion The commit in the Fixes tag below made so flow->mask free is scheduled via RCU right after it is removed from the flow table. The pointer stays in the flow structure and it can be accessible while in the same RCU critical section. This is done to avoid requiring ovs_mutex for the ovs_flow_free(). However, while removing the flow during processing of CMD_DEL, we do not take RCU read lock before the removal, and ovs_flow_cmd_fill_info() uses the flow->mask pointer afterwards. The RCU read lock is taken, but it's already late at that point. The comment on that line acknowledges that the lock is cosmetic and doesn't serve a real purpose. This leads to use-after-free if the RCU grace period passes between removal and the filling. It is a short race window, but it is there and can lead to a real crash in case memory allocation for the info takes a bit longer: BUG: KASAN: slab-use-after-free in __ovs_nla_put_key net/openvswitch/flow_netlink.c:1996 BUG: KASAN: slab-use-after-free in ovs_nla_put_key+0x2463/0x2e30 net/openvs
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: phylink: correctly validate returned PCS in phylink_inband_caps In phylink_inband_capCVE-2026-80993 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: phylink: correctly validate returned PCS in phylink_inband_caps In phylink_inband_caps(), the PCS returned by mac_select_pcs is only checked if NULL but mac_select_pcs can also return an error pointer. This can cause a kernel panic as phylink_pcs_inband_caps() only checks if passed PCS is not NULL and directly dereference ops from the phylink_pcs struct. Use the IS_ERR_OR_NULL macro to address both case where the returned PCS can be NULL or an error pointer and prevent a kernel panic.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: ravb: avoid dereferencing an invalid PTP clock The PTP clock is unavailable before thCVE-2026-80992 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net: ravb: avoid dereferencing an invalid PTP clock The PTP clock is unavailable before the first open, so querying its index can dereference a NULL pointer. Registration failures can also leave an error pointer in priv->ptp.clock. Cache the PHC index separately and report -1 while no clock is registered. Normalize registration errors to NULL and preserve the static timestamping capabilities.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: ravb: serialize PTP clock teardown ravb_ptp_interrupt() can race with ravb_ptp_stop()CVE-2026-80991 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net: ravb: serialize PTP clock teardown ravb_ptp_interrupt() can race with ravb_ptp_stop() and pass the clock to ptp_clock_event() while ptp_clock_unregister() is freeing it. This can lead to a use-after-free. Use READ_ONCE() and WRITE_ONCE() for lockless access to the clock pointer. Atomically detach it with xchg() before disabling PTP interrupts, then synchronize all IRQs which can invoke ravb_ptp_interrupt() before unregistering the detached clock. A handler which read the old pointer completes before the clock is unregistered, while later handlers read NULL and skip the event.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Release the Rx HopID that was handed out on mismatch tb_xdomain_alloc_inCVE-2026-80990 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Release the Rx HopID that was handed out on mismatch tb_xdomain_alloc_in_hopid() passes the wanted HopID to ida_alloc_range() as the lower bound, so a taken id is not an error there: the allocator returns the next free one above it. tbnet_connected_work() asks for the peer's transmit path, treats any other id as a failure and returns without releasing what it got, so that allocation stays live for the rest of the XDomain connection with nothing left holding a reference to it. Release the id when it is not the one we asked for, the same way the error unwind at the end of the function releases the expected one.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Vulnerability database

The flaws that hit local websites, every Friday.

Tell us what you're building.