Vulnerability database

21,993 results · page 52 of 440

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: mm/mglru: fix and remove redundant unevictable folio handling sort_folio() has a shortcut CVE-2026-89757 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm/mglru: fix and remove redundant unevictable folio handling sort_folio() has a shortcut for moving folios that are no longer evictable but are still sitting on a generation list. However, this shortcut is buggy. It does not follow the PG_lru usage convention, and it has a more serious issue. Unevictable folios are not threaded on lists[LRU_UNEVICTABLE], so that folio->lru can be reused to hold folio->mlock_count (see the comment in lruvec_init()). Hence lruvec_add_folio() skips the list_add() for them, and every other place that turns a folio unevictable initialises mlock_count explicitly: lru_add() sets it to 0, __mlock_folio() and __mlock_new_folio() set it to !!folio_test_mlocked(folio). sort_folio() sets nothing, and the lru_gen_del_folio() right above it may have already poisoned folio->lru via list_del(), so mlock_count ends up aliasing LIST_POISON2, which reads as 0x122, i.e. 290. The result is user visible. On munlock, __munlock_folio() decrements that bogus count, finds it still non-zero and bails out before clearing PG_mlocked, so the folio remains unevictable and the Mlocked accounting stays

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch() migrate_pages_batchCVE-2026-89756 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm/migrate: report RCU-tasks quiescent states in migrate_pages_batch() migrate_pages_batch() unmaps each folio before moving it, and every unmap runs the mmu_notifier invalidate callbacks. On KVM hosts try_to_migrate() ends up in kvm_mmu_notifier_invalidate_range_start() -> tdp_mmu_zap_leafs(), which is expensive, so unmapping a large batch keeps the CPU busy for a long time. The loop already calls cond_resched(), but on PREEMPTION kernels that is a no-op, and involuntary preemption is not a Tasks-RCU quiescent state. A long batch therefore never reports a quiescent state, and the migrating task (e.g. kcompactd) becomes a Tasks-RCU holdout, stalling the Tasks-RCU grace period for minutes, which is common at Meta fleet: INFO: rcu_tasks detected stalls on tasks: 0000000055349ecc: .. nvcsw: 1157401/1157401 holdout: 1 idle_cpu: -1/56 task:kcompactd0 state:R running task Call Trace: tdp_mmu_zap_leafs tdp_mmu_next_root gfn_to_pfn_cache_invalidate_start kvm_mmu_notifier_invalidate_range_start __mmu_notifier_invalidate_range_start try_to_migrate_one try_to_migrate migrate_pages_bat

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: clear stale mapping after freeing swapcache __migrate_device_pages() reCVE-2026-89755 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: clear stale mapping after freeing swapcache __migrate_device_pages() reads the folio mapping before calling folio_free_swap(). When folio_free_swap() succeeds, the folio is removed from the swap cache, but the saved mapping still points to swap_space. Passing the stale mapping to folio_migrate_mapping() makes it use the mapped-folio path for a folio that is no longer in swapcache. It can then operate on swap_space.i_pages with invalid reference accounting, eventually triggering a folio reference count BUG. After a successful split, nr still contains the number of pages in the original large folio, although each resulting page is now a separate order-0 folio. Reset nr to 1 so each split folio is processed separately, including its own swapcache removal and mapping lookup. Refresh the saved mapping after folio_free_swap() so the current folio state is used during migration.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: mm/pagewalk: fix stale walk->action escaping walk_pmd_range() If ->pmd_entry() sets walk->CVE-2026-89754 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: mm/pagewalk: fix stale walk->action escaping walk_pmd_range() If ->pmd_entry() sets walk->action = ACTION_AGAIN, the pmd_none() check is retried. The PMD entry may be cleared at the point of retry. In this case, if walk->ops->install_pte is not specified, the code continues to the next PMD entry in the range without resetting walk->action to ACTION_SUBTREE. This leaves walk->action erroneously set to ACTION_AGAIN, which is incorrect. This was incorrect but not problematic up until commit 3b89863c3fa4 ("mm/pagewalk: fix race between concurrent split and refault") which updated walk_pud_range() to check for walk->action == ACTION_AGAIN upon walk_pmd_range()'s return, causing the PUD walk to be retried. In this case this results in duplicate walk callbacks being invoked, which is erroneous and will break any caller that is not idempotent with respect to this (and waste time for those which are). The result is an out-of-bounds write, triggered by a local fuzzer: [ 2.272695] ================================================================== [ 2.273471] BUG: KASAN: slab-out-of-bounds in __mincore_unmapped_

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec() I am seeing some rcu_tasksCVE-2026-89753 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec() I am seeing some rcu_tasks stalls in the Meta fleet during reclaim. INFO: rcu_tasks detected stalls on tasks: 0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8 task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552 Call Trace: shrink_lruvec mem_cgroup_iter shrink_node do_try_to_free_pages try_to_free_pages __alloc_frozen_pages_noprof alloc_pages_noprof pte_alloc_one __pte_alloc handle_mm_fault Nothing promises direct reclaim returns in bounded time, and the scan loop in shrink_lruvec() only calls cond_resched(), which is a no-op on PREEMPTION kernels. Involuntary preemption is not a Tasks-RCU quiescent state, so the reclaiming task never reports one and becomes a holdout. Upgrade it to cond_resched_tasks_rcu_qs(), which reports a quiescent state even when cond_resched() does nothing. PS: This has been discussed in [1]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: mm: memcg: stop reclaim when a limit update is superseded kernfs serializes file operationCVE-2026-89752 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm: memcg: stop reclaim when a limit update is superseded kernfs serializes file operations only per open file, so separate open files can update the same memory.high or memory.max file concurrently. Both handlers store the new limit before synchronous reclaim, but continue to use the writer's local target in the reclaim loop. If another writer raises or removes the limit, the first writer can continue reclaiming toward a stale target. For memory.max, this can leave the writer looping indefinitely once reclaim retries are exhausted. The OOM path sees sufficient margin under the current limit and returns true without killing, while the writer still compares usage against its stale target and records another OOM event. Check the current limit at the start of each reclaim iteration and stop if it no longer matches the writer's target. Reproducer: Populate a cgroup with anonymous memory and disable swapping. Lower memory.max from one open file, then restore it to "max" through another open file after the new limit becomes visible. Without the patch, the first writer remains blocked and repeatedly increments

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Fix off-by-one in port I/O handling handle_in() and handle_out() in arch/x86/cocoCVE-2026-89751 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: x86/tdx: Fix off-by-one in port I/O handling handle_in() and handle_out() in arch/x86/coco/tdx/tdx.c use: u64 mask = GENMASK(BITS_PER_BYTE * size, 0); GENMASK(h, l) includes bit h. For size=1 (INB), this produces GENMASK(8, 0) = 0x1FF (9 bits) instead of GENMASK(7, 0) = 0xFF (8 bits). The mask is one bit too wide for all I/O sizes. Fix the mask calculation.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Clear copied tracing state before fork duplication dup_task_struct() CVE-2026-89750 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tracing/user_events: Clear copied tracing state before fork duplication dup_task_struct() copies user_event_mm from the parent into the child, without grabbing a reference to it. user_event_mm_dup() should replace it, but it leaves that copied pointer unmodified if user_event_mm_alloc() fails. When the child exits, user_event_mm_remove() decrements a reference the child never owned, which ultimately frees user_event_mm, while the parent still as a stale pointer to it. This creates a UAF, which KASAN reports as: BUG: KASAN: slab-use-after-free in current_user_event_mm+0x51/0x1d0 Write of size 4 at addr ffff888005010d30 by task init/44 Call Trace: <TASK> kasan_report+0xce/0x100 kasan_check_range+0x10f/0x1e0 current_user_event_mm+0x51/0x1d0 user_events_ioctl+0x82e/0x15c0 __x64_sys_ioctl+0x139/0x1c0 do_syscall_64+0xce/0x450 entry_SYSCALL_64_after_hwframe+0x77/0x7f Allocated by task 44: __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x180/0x3a0 user_event_mm_alloc+0x3c/0x1f0 current_user_event_mm+0x88/0x1d0 Freed by task 42:

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash passing ERR_PTR to kthread_stop() event_test_stuff() calls kthread_run(CVE-2026-89749 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tracing: Fix crash passing ERR_PTR to kthread_stop() event_test_stuff() calls kthread_run() and unconditionally passes the returned task_struct pointer to kthread_stop(). kthread_run() returns an error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for example under memory pressure during the boot-time event self-test. kthread_stop() then dereferences the invalid pointer, crashing the kernel. Check the result of kthread_run() before passing it to kthread_stop(). Use WARN_ON() so that a failure to create the self-test thread does not go unnoticed, matching the ring-buffer self-test fix in commit 91542863abad ("ring-buffer: Fix crash passing ERR_PTR to kthread_stop()").

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Fix retry exhaustion in simple ring buffer reader swap simple_ring_buffer_swap_reCVE-2026-89748 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tracing: Fix retry exhaustion in simple ring buffer reader swap simple_ring_buffer_swap_reader_page() starts with retry set to 8 and post-decrements it only after a failed link replacement. On the final attempt, a successful replacement leaves retry at zero, while a failed replacement leaves it at -1. The current !retry test reverses both outcomes. It returns an error after a successful final replacement, leaving the link update complete but the reader bookkeeping unfinished. After a failed final replacement, it falls through and updates the head and reader pointers as though the replacement succeeded, which can corrupt the ring. Treat only a negative counter as exhaustion and return the documented -EBUSY error.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free in trace_pipe read on sub-buffer order change Writing to buffeCVE-2026-89747 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free in trace_pipe read on sub-buffer order change Writing to buffer_subbuf_size_kb calls ring_buffer_subbuf_order_set(), which frees every sub-buffer of the ring buffer, including the reader page, and replaces them with newly allocated ones. Readers of trace_pipe hold pointers into those pages. ring_buffer_peek() looks up an event under cpu_buffer->reader_lock but returns the event pointer after dropping the lock, and peek_next_entry() then calls ring_buffer_event_length() and ring_buffer_event_data() on it. If the sub-buffer order is changed in that window, the reader dereferences freed memory: BUG: KASAN: use-after-free in ring_buffer_peek+0x3e0/0x430 Read of size 1 at addr ffff88802a4cf010 by task syz-executor989/6002 Freed by: free_buffer_page kernel/trace/ring_buffer.c:398 [inline] ring_buffer_subbuf_order_set+0x1325/0x18e0 kernel/trace/ring_buffer.c:7444 buffer_subbuf_size_write+0x182/0x280 kernel/trace/trace.c:8221 Take trace_access_lock(RING_BUFFER_ALL_CPUS) around the order change. This is the lock trace_pipe readers already hold across their entire peek-and-pri

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free with same-name named triggers When two hist triggers on differCVE-2026-89746 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free with same-name named triggers When two hist triggers on different events are registered with the same name=, the second one reuses the first as named_data. Both are added to tr->hist_vars by save_hist_vars() during event_hist_trigger_parse(), because save_hist_vars() is called before event_trigger_register() while the named reuse is only detected later, in hist_register_trigger(). In the named-data branch hist_register_trigger() then frees the second histogram's hist_data via destroy_hist_data(), but never removes its tr->hist_vars list entry, leaving a dangling pointer and leaking the trace_array reference it holds. A later hist trigger that references a variable makes find_var_file() walk tr->hist_vars and dereference the freed hist_data. The bug is reproducible from userspace by writing three hist triggers to tracefs: cd /sys/kernel/tracing echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_switch/trigger echo 'hist:keys=common_pid:x=common_pid:name=mh' > events/sched/sched_process_fork/trigger echo 'hist:keys=common_pid:vals=$x' > events/sched/sched_

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: debugfs: Fix lockdown check for mmap_prepare Commit 651fdda8406d ("relay: update relay to CVE-2026-89745 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: debugfs: Fix lockdown check for mmap_prepare Commit 651fdda8406d ("relay: update relay to use mmap_prepare") changed the `mmap` file operation to `mmap_prepare` for relayfs, but the lockdown check in debugfs was not updated accordingly. This prevents debugfs from being locked down when the kernel is in integrity mode if a file uses `mmap_prepare` but not `mmap`. Since the conversion to `mmap_prepare` across the kernel is not yet complete, update the lockdown check to look for both `mmap` and `mmap_prepare` to ensure comprehensive coverage.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: device property: fix infinite loop in fwnode_for_each_child_node() When iterate over childCVE-2026-89744 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: device property: fix infinite loop in fwnode_for_each_child_node() When iterate over children of a fwnode that has a secondary fwnode, fwnode_get_next_child_node() can enter an infinite loop if the secondary fwnode has more than one child. Parent Child (Primary fwnode) FWa: {FWa1, FWa2, FWa3} (Secondary fwnode) FWb: {FWb1, FWb2} In this case: ┌─> fwnode_get_next_child_node(FWa, FWa1) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2 │ │ ... │ │ fwnode_get_next_child_node(FWa, FWa3) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL │ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1 │ │ fwnode_get_next_child_node(FWa, FWb1) │ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1 └────┘ This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}. The root cause is that when the current child (FWb1) belongs to the secondary fwnode, calling get_next_child_node() on the parimary fwnode incorrectly returns the first ch

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: misc: nsm: bound the device-reported response length nsm_sendrecv_msg_locked() stores the CVE-2026-89743 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.7

  In the Linux kernel, the following vulnerability has been resolved: misc: nsm: bound the device-reported response length nsm_sendrecv_msg_locked() stores the virtqueue used-ring length reported by the NSM device into msg->resp.len without bounding it to the response buffer. A malicious or buggy backend can report a length larger than the response buffer; parse_resp_raw() then copies that many bytes out of the fixed buffer to user space, disclosing adjacent kernel heap (an out-of-bounds read). The request path already floors its length in fill_req_raw(); the response path lacks the symmetric check. Clamp the stored length to the size of the response buffer. Well-behaved devices report no more than the posted buffer size, so conforming traffic is unaffected.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: rapidio: mport_cdev: fix use-after-free in dma_req_free() dma_req_free() acquires buf_muteCVE-2026-89742 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: rapidio: mport_cdev: fix use-after-free in dma_req_free() dma_req_free() acquires buf_mutex through req->map, drops the mapping reference with kref_put(), and then dereferences req->map again to unlock the mutex. If kref_put() drops the last reference, mport_release_mapping() frees the mapping, and the subsequent mutex_unlock() dereferences a freed object. This is a use-after-free. Fix this by caching map and md before kref_put(), clearing req->map while holding buf_mutex, and using the cached md for mutex unlocking. The bug is reachable from userspace via the RapidIO mport character device interface.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: Revert "media: v4l2-dev: fix error handling in __video_register_device()" This reverts comCVE-2026-89741 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: Revert "media: v4l2-dev: fix error handling in __video_register_device()" This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a. The intentions of that patch were good, but it doesn't work. The idea is that if device_register fails, you have to do a put_device to let the ref counter release resources. However, the V4L2 API says that if video_register_device() fails, then you have to call video_device_release(), which kfree()s the video_device struct. But the put_device() will already have freed the struct, so you end up in a double-free scenario. There is not really a good way of fixing this without breaking video_register_device() into two parts, one that initializes everything, and one that does the actual device_register, and then converting all V4L2 drivers to this new model. That is a massive job, and it is very unlikely that device_register will fail. So rather than ending up in a double-free scenario, just revert this patch, and in that case we'll have a small memory leak. Which is a lot more robust.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: serial: imx: serialize imx_uart_ports[] lifetime imx_uart_probe() publishes its devm-allocCVE-2026-89740 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: serial: imx: serialize imx_uart_ports[] lifetime imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[] before uart_add_one_port() because console setup uses the table. The entry is not cleared when adding the port fails or after removal, leaving a dangling pointer. A sibling probe can register the shared console through that stale entry. This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a sibling UART, unbinding the console UART and rebinding the sibling. Keep the entry valid through uart_remove_one_port(), then clear it. Protect port addition and removal together with their table updates so sibling operations cannot interleave. Reject an occupied slot rather than clobbering an active port during a duplicate-line probe.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition CVE-2026-89739 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Fix use-after-free in dwc3_gadget_free_endpoints due to race condition In dwc3_gadget_init_endpoint, &dep->nostream_work is bound with dwc3_nostream_work, and dwc3_gadget_endpoint_stream_event can queue this delayed work on system_percpu_wq when a DEPEVT_STREAM_NOSTREAM event is received. If we remove the gadget, dwc3_gadget_free_endpoints makes cleanup and the memory allocated for dep with kzalloc() is released by kfree(dep), while the delayed work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | dwc3_thread_interrupt | dwc3_endpoint_interrupt | dwc3_gadget_endpoint_stream_event | queue_delayed_work(system_percpu_wq, | &dep->nostream_work) dwc3_gadget_free_endpoints | dwc3_free_trb_pool(dep) | list_del(&dep->endpoint.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed In polled-VBUS modCVE-2026-89738 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via mod_timer(). Both recover the same udc through container_of and dereference it on every iteration. Neither teardown path cancels this cycle. udc is devm-allocated, so it is freed after at91udc_remove() returns, and is likewise freed when probe fails and devres runs. A timer callback or work item that is pending or running at either point dereferences the freed udc. Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and from the usb_add_gadget_udc() failure path in probe; the remaining probe error paths fail before the timer is armed. timer_shutdown_sync() waits for a running callback and clears timer->function, which makes the work handler's mod_timer() a permanent no-op; cancel_work_sync() then drains any pending or running work whose re-arm attempt now does nothing. The timer must be shut down first, since

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: usb: typec: thunderbolt: Disable work before freeing tbt on remove tbt_altmode_remove() drCVE-2026-89737 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: typec: thunderbolt: Disable work before freeing tbt on remove tbt_altmode_remove() drops the plug and cable references without draining tbt->work. The work function dereferences those references, and can also requeue itself in its error path. The VDM callbacks can queue the same work item. Disable and drain tbt->work before dropping the references. This waits for an existing invocation and prevents subsequent schedule_work() calls from queueing it during teardown. This issue was found by an in-house static analysis tool and confirmed by manual code review.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix use-after-free on sound card disconnect g_audio_cleanup() invokeCVE-2026-89736 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_audio: Fix use-after-free on sound card disconnect g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound card teardown and immediately frees the underlying struct snd_uac_chip context. However, snd_card_free_when_closed() returns asynchronously while ALSA control elements (kctls) remain open in userspace. When userspace control applications access or close these open file descriptors, kctl callbacks attempt to dereference kctl->private_data pointing to &uac->c_prm or &uac->p_prm within the freed uac structure, resulting in a use-after-free (UAF) memory corruption. Fix this issue by deferring the destruction of struct snd_uac_chip until all references to the ALSA sound card are released. Register a custom card->private_free callback (u_audio_card_free) during g_audio_setup() that frees uac and its associated playback/capture request and ring buffers only when the sound card reference count drops to zero.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: remove default configfs groups on teardown f_midi2_alloc_inst() createCVE-2026-89735 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: remove default configfs groups on teardown f_midi2_alloc_inst() creates default configfs child groups for the default endpoint and default block using configfs_add_default_group(), setting their internal refcount to 1. However, during function teardown in f_midi2_free_inst() or EP cleanup in f_midi2_ep_opts_release(), configfs_remove_default_groups() is never called, therefore never dropping the refcount and leaking struct f_midi2_ep_opts and f_midi2_block_opts. Add the missing configfs_remove_default_groups() in the afformentioned functions to free the structs properly.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init() In uvcg_video_init(), CVE-2026-89734 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init() In uvcg_video_init(), if kthread_run_worker() fails, the error logged uses uvcg_err(), however, the pointer it uses: video->uvc is not assigned at this point, triggering a null pointer dereference. Fix this by directly using uvc->func which is assigned already.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind() ICVE-2026-89733 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind() In uvc_function_bind() error path, we use usb_ep_free_request which uses uvc->control_req but does not set it to NULL afterwards. Thus, uvc->control_req is a dangling pointer causing a UAF. Also we do not set the uvc->control_buf pointer to NULL after freeing it, which is another dangling pointer. Fix it by setting uvc->control_req to NULL after we run usb_ep_free_request() and uvc->control_buf to NULL after kfree. Do the same for uvc_function_unbind().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Prevent deadlock during ep0 read loop Currently, ffs_ep0_read() holds fCVE-2026-89732 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Prevent deadlock during ep0 read loop Currently, ffs_ep0_read() holds ffs->mutex when it prepares to go to sleep waiting for an event. When no setup events are pending, it calls wait_event_interruptible_exclusive_locked_irq() with the mutex still held. The wait macro deliberately drops the waitqueue spinlock before sleeping but does not drop the mutex. If a userspace daemon is polling ep0 via read() and the gadget is asynchronously torn down via configfs (e.g., echo "" > UDC), a deadlock can occur: 1. The configfs teardown calls functionfs_unbind(), which queues a FUNCTIONFS_UNBIND event. 2. The daemon wakes up, consumes the event, and drops the mutex. 3. However, if the daemon loops and immediately issues another read() before exiting, it reacquires ffs->mutex and again goes into an interruptible sleep. 4. Meanwhile, functionfs_unbind() continues execution and attempts to acquire ffs->mutex to tear down ep0req. 5. The kernel deadlocks because the configfs thread is stuck in an uninterruptible sleep waiting for the mutex, while the userspace daemon is in an interruptible sle

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read cxl_rch_get_aer_info()CVE-2026-89731 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read cxl_rch_get_aer_info() copies the RCH Downstream Port AER capability from the RCRB MMIO block using a readl() loop bounded by sizeof(struct aer_capability_regs). This struct is a software layout and its embedded struct pcie_tlp_log is larger than the on-wire AER capability. As a result the loop reads past the mapped AER register block. The over-read also populates the software-only tail fields including header_log.header_len. An out-of-range header_len passed to pcie_print_tlp_log() can then loop past the header log buffer and cause a second out-of-bounds read. The read was correct when introduced, but struct pcie_tlp_log has since grown (Header Log and TLP Prefix Log sizes, header_len and flit fields), so sizeof(struct aer_capability_regs) no longer matches the physical AER capability. Bound the read to the physical AER registers, header through the 16 byte Header Log. Zero the destination first so the software-only fields are deterministic.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: fpga: altera-cvp: Avoid out-of-bounds read in trailing byte write The trailing byte path iCVE-2026-89730 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: fpga: altera-cvp: Avoid out-of-bounds read in trailing byte write The trailing byte path in altera_cvp_send_block() dereferences a u32 pointer even when only 1-3 bytes remain in the input buffer. If the buffer ends at a page or scatterlist boundary, this can read past the valid image data and fault. Copy the remaining bytes into a zero-initialized u32 before writing the final word so only valid bytes are read from the input buffer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature sensor_hub_get_feature(CVE-2026-89729 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature sensor_hub_get_feature() clamps its return value to the caller's buffer size, but the copy loop still copies field->report_size / 8 bytes for each report value. A malicious HID descriptor can advertise a large feature field size while an IIO caller supplies a small stack buffer, such as a single s32, causing an out-of-bounds write. HID core stores parsed report values in __s32 slots and clamps extracted values to 32 bits. Reject feature fields that require more than one slot per value, guard the total byte count calculation, and clamp each per-value copy to the remaining caller buffer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: i3c: renesas: Fix out-of-bounds access for newdevs mask When software initiates DAA (DynamCVE-2026-89728 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: i3c: renesas: Fix out-of-bounds access for newdevs mask When software initiates DAA (Dynamic Address Assignment), the controller reports the result via the NRSPQP (Normal Response Queue Port Register). The data length field of the response descriptor, which is accessible through the NRSPQP register, indicates the number of devices remaining after DAA. Consequently, when the bus is empty, this field contains the maximum number of devices supported by the controller (8 for the Renesas I3C controller). Adjust the condition that computes the newly discovered devices bitmask to prevent an out-of-bounds when the I3C bus is empty.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: GICv2: Don't WARN on out-of-range GICV_DIR INTID vgic_v2_deactivate() passes tCVE-2026-89727 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: GICv2: Don't WARN on out-of-range GICV_DIR INTID vgic_v2_deactivate() passes the INTID a guest wrote to GICV_DIR straight to vgic_get_vcpu_irq(), and treats a failed lookup as a "can't happen" condition with WARN_ON_ONCE(). The guest can make it happen at will, though: for any INTID outside of the implemented SGI, PPI and SPI ranges the lookup returns NULL, since GICv2 has no LPIs. A guest running with EOImode==1 writing such an INTID to GICV_DIR triggers the WARN, and panics hosts running with panic_on_warn. Drop the WARN and ignore failed lookups.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: lib/ucs2_string.c: fix out-of-bounds read in ucs2_strnlen() Patch series "lib/ucs2_string.CVE-2026-89726 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: lib/ucs2_string.c: fix out-of-bounds read in ucs2_strnlen() Patch series "lib/ucs2_string.c: fix out-of-bounds read in ucs2_strnlen()", v2. This series fixes an off-by-one out-of-bounds read in ucs2_strnlen(). The first patch is the real fix, the second patch comes as a bonus and fixes the code indentation. This patch (of 2): ucs2_strnlen() checks the current character before checking whether the caller-provided maximum length has been reached. If the input is not NUL-terminated within that bound, the loop can read one ucs2_char_t past the limit. Test the length before dereferencing to prevent an off-by-one out-of-bounds read.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: media: cec: stm32: prevent out-of-bounds write on RX overflow stm32_rx_done() appends eachCVE-2026-89725 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: media: cec: stm32: prevent out-of-bounds write on RX overflow stm32_rx_done() appends each received CEC byte to rx_msg.msg[] using rx_msg.len as the write index, incrementing it on every RXBR (receive-byte-ready) interrupt without checking it against the buffer size: cec->rx_msg.msg[cec->rx_msg.len++] = val & 0xFF; rx_msg.msg[] is a fixed CEC_MAX_MSG_SIZE (16) byte array in struct cec_msg, and rx_msg.len is only reset on RXACKE/RXOVR or after a completed message (RXEND). The number of bytes received before RXEND is decided by the remote CEC device (it sets EOM), not by the driver. A peer that keeps sending bytes without ending the message drives RXBR repeatedly, pushing rx_msg.len past 16 and writing peer-controlled bytes out of bounds into the surrounding memory. This is reachable in normal operation once the driver has probed and receiving is enabled, from the IRQ thread, without any local privilege. The length check in the CEC core runs on the consumer side, after the byte has been stored, so it does not prevent the overflow. Bound the index in the driver before the store, as the other platform CEC drivers

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: media: vicodec: fix out-of-bounds write in FWHT encoder vidioc_s_fmt_vid_out() sizes the eCVE-2026-89724 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: media: vicodec: fix out-of-bounds write in FWHT encoder vidioc_s_fmt_vid_out() sizes the encoder CAPTURE buffer from the compressed descriptor pixfmt_fwht, whose sizeimage_mult is 3: coded_w * coded_h * 3 + sizeof(struct fwht_cframe_hdr). fwht_encode_frame() encodes one plane per component, and an incompressible plane takes the FWHT_FRAME_UNENCODED path in encode_plane(), copying the plane verbatim. For a 4-component pixel format all four planes are full resolution (width_div == height_div == 1), so a frame that forces every plane through the unencoded fallback writes sizeof(struct fwht_cframe_hdr) + 4 * coded_w * coded_h bytes, overrunning the plane by coded_w * coded_h, which can result in corruption of adjacent kernel heap memory. Bump pixfmt_fwht.sizeimage_mult from 3 to 4, matching the largest components_num among the supported raw formats, so the capture buffer is always large enough for the unencoded fallback.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix slab-out-of-bounds in nilfs_direct_propagate after truncation Shuangpeng Bai rCVE-2026-89723 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix slab-out-of-bounds in nilfs_direct_propagate after truncation Shuangpeng Bai reported that KASAN detected a slab-out-of-bounds error in nilfs_direct_propagate() during testing. Analysis revealed that after truncating a file, a node block immediately below the B-tree root was not deleted. Instead, it remained in the B-tree node cache in a dirty state. The log writer subsequently detected this block and incorrectly invoked nilfs_direct_propagate() on it, which is designed to handle only data blocks in direct mapping. B-tree nodes in the cache are managed by virtual block numbers, and their logical keys typically exceed the range expected by direct mapping. Consequently, processing such a node as a direct mapping entry triggers a slab-out-of-bounds access. The root cause is that when a B-tree mapping collapses into a direct mapping during truncation, an intermediate node block pointed to by the root node is left behind as garbage instead of being explicitly deleted. This resolves the issue by adding a nilfs_btree_discard() operation to delete the remaining intermediate node block during the convers

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Fix out-of-bounds read in pci_write_legacy_io() pci_write_legacy_io() loads 4 bCVE-2026-89722 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Fix out-of-bounds read in pci_write_legacy_io() pci_write_legacy_io() loads 4 bytes from the kernfs write buffer regardless of how many bytes userspace wrote: if (count != 1 && count != 2 && count != 4) return -EINVAL; return pci_legacy_write(bus, off, *(u32 *)buf, count); kernfs_fop_write_iter() allocates the buffer with kmalloc(len + 1), so a 1-byte write to the legacy_io sysfs file allocates 2 bytes and the unconditional u32 load reads up to 2 bytes past the end of the allocation, which KASAN reports as a slab-out-of-bounds read. Similarly, a 2-byte write overreads by 1 byte. Thus, read only the number of bytes requested using get_unaligned_le16() and get_unaligned_le32() for the 2 and 4 byte cases, interpreting the buffer as little-endian to match the byte ordering of PCI I/O port space. The PowerPC implementation previously compensated for the generic code's native-endian 32-bit load by shifting the value into place for the 1 and 2 byte cases. The shifts were only correct on big-endian kernels. On little-endian PowerPC (POWER8 and later), they extracted the wrong bytes, so a 1

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: phy: rockchip-samsung-dcphy: fix out-of-range max_register The PHY register block is 64KB,CVE-2026-89721 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: phy: rockchip-samsung-dcphy: fix out-of-range max_register The PHY register block is 64KB, so with a register stride of 4 the last accessible register sits at offset 0xfffc. max_register names 0x10000, one register past the end of the mapping: dumping the registers through the regmap debugfs interface reads beyond the ioremapped region and oopses on the unmapped page. The oops fires with the regmap lock held, so later PHY operations deadlock.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ubifs: fix out-of-bounds read in signature length check ubifs_sb_verify_signature() boundsCVE-2026-89720 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.7

  In the Linux kernel, the following vulnerability has been resolved: ubifs: fix out-of-bounds read in signature length check ubifs_sb_verify_signature() bounds the on-disk ubifs_sig_node->len field before handing the signature payload to verify_pkcs7_signature(), but the check has the wrong sign: if (le32_to_cpu(signode->len) > snod->len + sizeof(struct ubifs_sig_node)) The signature bytes start sizeof(struct ubifs_sig_node) (UBIFS_SIG_NODE_SZ, 64 bytes) into the node, so the payload is at most snod->len - sizeof(struct ubifs_sig_node) bytes long. Adding the header size instead of subtracting it accepts a declared length up to 2 * UBIFS_SIG_NODE_SZ larger than the node actually holds -- past the end of c->sbuf, which is vmalloc(c->leb_size). verify_pkcs7_signature() -> pkcs7_parse_message() -> asn1_ber_decoder() is then handed that inflated length and reads beyond the allocation while walking the DER headers. The node length comes straight from the mounted image, so a crafted signed UBIFS image reaches this via ubifs_read_superblock() before the signature is cryptographically checked. snod->len is guaranteed to be >= UBIFS_SIG_NODE_SZ by the node scanner (c->ranges[UBIFS_SI

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: zram: fix out-of-bounds access in read_block_state() read_block_state() calculates nr_pageCVE-2026-89719 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: zram: fix out-of-bounds access in read_block_state() read_block_state() calculates nr_pages before taking dev_lock. If the device is reset and reinitialized with a smaller disksize before lock acquisition, nr_pages still describes the old table. The subsequent loop can then call slot_lock() past the end of the newly allocated table. Read disksize after acquiring dev_lock and checking that the device is initialized. The read lock then keeps the table and its bound stable for the duration of the scan.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: zram: fix out-of-bounds access in writeback_store() Patch series "zram: fix stale scan bouCVE-2026-89718 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: zram: fix out-of-bounds access in writeback_store() Patch series "zram: fix stale scan bounds after reinitialization". Both writeback_store() and read_block_state() derive their table scan bounds from zram->disksize before acquiring dev_lock. If the device is reset and reinitialized with a smaller disksize between that read and lock acquisition, the bound can describe the old table while the scan operates on the new one. This can lead to out-of-bounds slot accesses. Move both bound calculations under dev_lock so each bound remains consistent with the table throughout its scan. Keep the fixes separate because the affected interfaces originate from different commits and can be backported independently. This patch (of 2): writeback_store() calculates the table scan bounds before taking dev_lock. A reset followed by reconfiguration with a smaller disksize can therefore replace zram->table while writeback_store() is waiting for the lock. Once it acquires the lock, it sees an initialized device but scans the new table using the old upper bound, resulting in an out-of-bounds access. Calculate the number of pag

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: zram: set default primary compressor in zram_destroy_comps() Patch series "zram: fix zram CVE-2026-89717 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: zram: set default primary compressor in zram_destroy_comps() Patch series "zram: fix zram issues reported by sashiko". Sashiko drove by and reported [1] a couple of zram issues: a possible BUG_ON() in zlib code due to missing winbits range validation and one possible NULL-ptr dereference in zcomp. Both are low risk yet still worth fixing. This patch (of 2): zram_destroy_comps() resets all compressors and leaves them set to NULL, including the primary one, which is invalid device state, as now comp_algorithm_show()->strcmp() can be called on a NULL compressor. Set default primary compressor in zram_destroy_comps().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: zram: validate deflate params We must validate user-supplied deflate winbits before we pasCVE-2026-89716 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: zram: validate deflate params We must validate user-supplied deflate winbits before we pass it to zlib_deflate_workspacesize(), which triggers BUG_ON() if winbits value is outside of valid ranges.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: NFS/localio: fix ref leak on nfs_uuid_add_file failure When nfs_uuid_add_file() races withCVE-2026-89715 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: NFS/localio: fix ref leak on nfs_uuid_add_file failure When nfs_uuid_add_file() races with nfs_uuid_put() tearing down uuid->net, it returns -ENXIO without publishing nfl->nfs_uuid via rcu_assign_pointer(). nfs_open_local_fh() then enters its error branch and only releases the slot's file ref and its paired net ref plus its own entry-time net ref, while the close path is a no-op: nfs_close_local_fh() nfs_uuid = rcu_dereference(nfl->nfs_uuid); if (!nfs_uuid) { rcu_read_unlock(); return; } /* always */ nfsd_open_local_fh() returns localio holding a caller-owned +1 nfsd_file reference (from nfsd_file_get() after nfsd_file_acquire_local()) and an entry-time nfsd_net reference (from its first nfsd_net_try_get()) embedded as nf->nf_net. Both are leaked on the failure path, pinning one nfsd_file (and the underlying struct file, dentry, inode) and one nfsd_net_ref per occurrence, which blocks nfsd_net and netns teardown. Fix by releasing the caller-owned file ref and its net ref through the existing helper, using a stack-local RCU pointer so the helper can xchg it out, then returning -ENXIO so calle

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails nfs4_server_commCVE-2026-89714 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails nfs4_server_common_setup() allocates server->delegation_hash_table first, but server->destroy - the only path that frees the table via nfs4_destroy_server() - is not assigned until the very end of the function. If any intermediate step fails (the is_ds_only_client() check, nfs4_init_session(), nfs4_get_rootfh(), or nfs_probe_server()), the function returns with server->destroy still NULL, so the caller's nfs_free_server() skips the destroy callback and the hash table is leaked (4 KiB per attempt with the default delegation watermark). This is trivially reachable from userspace: every failed NFSv4 mount leaks one allocation. A client that persistently retries a mount that cannot succeed leaks kernel memory without bound. Observed in production where a Longhorn backup poller retried mount.nfs4 against an NFSv3-only server roughly 10 times per second, leaking ~3.4 GiB of unreclaimable slab (kmalloc-rnd-13-4k) per day; the node accumulated 12 GiB of leaked slab before the source was identified via the kmem:kmalloc tracepoint (call_site=nfs4_de

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: check truncate permission under inode lock nfsd_setattr() checks whether a size updaCVE-2026-89713 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: NFSD: check truncate permission under inode lock nfsd_setattr() checks whether a size update needs NFSD_MAY_TRUNC before it takes inode_lock(). The comparison uses the file size sampled by that unlocked read, but the actual ATTR_SIZE update is applied later under inode_lock() by notify_change(). This leaves a TOCTOU window for append-only files. If a client sends a SETATTR that does not shrink the file at the time of the unlocked sample, a concurrent append can extend the file before nfsd_setattr() takes inode_lock(). notify_change() then applies a real truncation without the NFSD_MAY_TRUNC check that rejects IS_APPEND(inode). The VFS truncate syscall paths perform their own append-only checks before calling notify_change(), so NFSD must make this decision against the locked size it is about to change. Split the write-count acquisition from the truncation permission check. Keep get_write_access() before the locked setattr work, then recheck whether the requested size is below i_size_read(inode) after inode_lock() has been acquired and before notify_change(ATTR_SIZE). This also avoids the plain unlocked inode->i

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: restart ssc_expire_umount walk after dropping nfsd_ssc_lock nfsd4_ssc_expire_umount(CVE-2026-89712 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: NFSD: restart ssc_expire_umount walk after dropping nfsd_ssc_lock nfsd4_ssc_expire_umount() walks nn->nfsd_ssc_mount_list with list_for_each_entry_safe(ni, tmp, ...). For each expired entry it sets nsui_busy = true, drops nfsd_ssc_lock to run mntput() on the source vfsmount, then reacquires the lock to list_del + kfree the entry and continue iterating via the macro's saved tmp pointer. The nsui_busy flag protects the current ni from concurrent nfsd4_ssc_setup_dul() finders during the lock-drop window, but it does not pin tmp. Another nfsd RPC thread that fails its source- server mount and reaches nfsd4_ssc_cancel_dul() will, during that same window, take nfsd_ssc_lock, list_del + kfree its own ssc_umount item, and release the lock. If that item is the saved tmp of the expire walk, the next iteration dereferences a freed nfsd4_ssc_umount_item. Restart the walk from the head after the mntput() unlock window so no saved next pointer survives the lock-drop. The list is bounded by the number of active inter-server source mounts (typically small) and the expire delayed-work runs periodically rather than per-IO, s

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: remove flawed WARN_ON_ONCE from nfsd_mode_check The header for commit e75b23f9e323 (CVE-2026-89711 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.2

  In the Linux kernel, the following vulnerability has been resolved: NFSD: remove flawed WARN_ON_ONCE from nfsd_mode_check The header for commit e75b23f9e323 ("nfsd: check d_can_lookup in fh_verify of directories") details the assumption that justified adding the WARN_ON_ONCE to nfsd_mode_check(), that assumption is invalid (in the case of NFS reexport). When NFSD exports an NFS filesystem it is very possible for nfsd_mode_check() to encounter a @dentry that doesn't have i_op->lookup (see nfs_fhget()'s NFS_ATTR_FATTR_MOUNTPOINT and NFS_ATTR_FATTR_V4_REFERRAL handling, and d_flags_for_inode()). So remove nfsd_mode_check()'s WARN_ON_ONCE(). The nfserr_notdir return on that branch must stay. It guards the subsequent lookup_one_unlocked() -> __lookup_slow() path, which calls inode->i_op->lookup() with no NULL check, so returning nfserr_notdir is what keeps a client LOOKUP into such a @dentry from dereferencing a NULL method pointer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: fix layout segment leak on the pnfs_layout_process() forget path When the server CVE-2026-89710 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: fix layout segment leak on the pnfs_layout_process() forget path When the server returns a new layout stateid while a valid one is still held, pnfs_layout_process() calls pnfs_mark_matching_lsegs_return() on the on-stack free_me list and jumps to out_forget. Segments whose reference count drops to zero are unlinked from lo->plh_segs and moved to free_me by mark_lseg_invalid(); for an idle cached segment the layout header holds the only reference, so this happens on the first decrement. out_forget never drains free_me -- only the success path calls pnfs_free_lseg_list(). Commit 814b84971388 ("pNFS/NFSv4: Fix a layout segment leak in pnfs_layout_process()") added the drain; commit 08bd8dbe8882 ("pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()") removed it while switching the destination to lo->plh_return_segs, which is drained elsewhere. Commit fb700ef02676 ("NFSv4.1: Simplify layout return in pnfs_layout_process()") switched the destination back to free_me without restoring the drain. Restore the pnfs_free_lseg_list() call.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: lockd, nfsd: RCU-protect nlmsvc_ops dispatch nlmsvc_ops is published by nfsd_lockd_init() CVE-2026-89709 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: lockd, nfsd: RCU-protect nlmsvc_ops dispatch nlmsvc_ops is published by nfsd_lockd_init() and cleared by nfsd_lockd_shutdown() with plain stores, while lockd dereferences it unguarded from dispatch sites in fs/lockd/svcsubs.c. The pointer targets nfsd's .rodata and the fopen/fclose callbacks live in nfsd's .text, so a stale load after rmmod nfsd results in either a NULL deref or a module-text use-after-free. Declare nlmsvc_ops as __rcu, publish via rcu_assign_pointer(), clear via RCU_INIT_POINTER() + synchronize_rcu(). Add a struct module *owner field to nlmsvc_binding and pin the module across indirect calls with try_module_get/module_put. When the binding is torn down, fall back to fput() to avoid leaking struct file references.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown After a DESTROY_CVE-2026-89708 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: nfsd: RCU-protect cl_cb_session to fix use-after-free on session teardown After a DESTROY_SESSION the per-session teardown path can free a session while rpciod still holds an inflight callback rpc_task that dereferences clp->cl_cb_session. nfsd4_probe_callback_sync() flushes cl_callback_wq, but once nfsd4_run_cb_work() has called rpc_call_async() the rpc_task lives on rpciod; flushing the workqueue does not wait for it. rpc_shutdown_client() does drain rpciod tasks, but uses a 1-second wait_event_timeout — tasks stuck in rpc_delay() (e.g. 2-second NFS4ERR_DELAY retries) can outlive the drain. destroy path rpciod ------------ ------ unhash_session(ses) nfsd4_probe_callback_sync(clp) flush_workqueue(cl_callback_wq) /* returns; rpc_task still live */ nfsd4_put_session_locked(ses) free_session(ses) -> kfree(ses) nfsd4_cb_sequence_done() reads cb_clp->cl_cb_session /* freed slab */ A second window exists in nfsd4_pro

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.