Vulnerability database

25,335 results · page 51 of 507

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: ceph: properly decrypt filenames in vmalloc() buffers The fscrypt subsystem uses the scattCVE-2026-90042 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: ceph: properly decrypt filenames in vmalloc() buffers The fscrypt subsystem uses the scatterlist crypto API, inheriting its requirement that any buffers are in the linear mapping region. However, the messenger client uses kvmalloc() to create buffers for messages, which will occasionally place those buffers in the vmalloc() region when physical memory fragmentation doesn't permit a large enough kmalloc(). The various callers of ceph_fname_to_usr() directly pass (slices of) raw messages from the MDS without considering that the messages may be in vmalloc() buffers, resulting in oopses especially on non-x86 platforms (see 'Closes:' for more details and a reproducer). Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated fname->ctext, fname->name, and/or oname->name buffers, using `tname` (which, when non-null, must be a linear address; when null, is briefly allocated as necessary) as a bounce buffer to avoid passing any inappropriate addresses to fscrypt_fname_disk_to_usr(). Additionally change parse_reply_info_readdir() -- the only function to supply its own `tname` -- to follow the new "tname must

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: HID: sony: clean up device list on probe failure sony_input_configured() adds some controlCVE-2026-90041 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: HID: sony: clean up device list on probe failure sony_input_configured() adds some controllers to sony_device_list before HID core registers their input devices. input_register_device() can fail after the callback returns successfully. sony_probe() then observes that HID_CLAIMED_INPUT is clear and unwinds, but only stops the HID hardware. The devres-managed sony_sc is freed while its list node remains linked, so the next matching controller traverses freed memory. Initialize the list node and device ID to inactive states. Make list removal idempotent and run the driver-private cleanup on every probe failure path. This also makes a second cleanup safe when sony_input_configured() already unwound a partial initialization before sony_probe() handles the missing input claim. Found by 0sec (https://0sec.ai) using automated source analysis; verified against the HID input registration and probe unwind paths.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped Wire up a gmemCVE-2026-90040 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force vCPUs to reload/recheck their guest-provided VMSA if the backing gmem page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core logic to handle invalidations as VMX does for the APIC-access page, as the two concepts are nearly identical: shove the physical address of a page into the vCPU's control structure: 1. Snapshot the invalidation sequence counter 2. Grab the pfn (from guest_memfd in this case) 3. Acquire mmu_lock for read 4. Re-request reload if retry is needed, otherwise commit the change. Note, the re-request action in #4 is necessary as KVM's retry logic is fuzzy, i.e. can get false positives. If the guest_memfd page has been dropped, at some point a subsequent reload will fail to get a PFN from guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false positive, KVM will retry until there are no relevant MMU notifier events (and will retry in the "outer" loop, i.e. will drop locks and resched as needed). Note #2! Take

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: Guard admin state-revocation walks with NFSD_NET_UP Writing to /proc/fs/nfsd/unlock_CVE-2026-90039 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: NFSD: Guard admin state-revocation walks with NFSD_NET_UP Writing to /proc/fs/nfsd/unlock_filesystem, or sending the NFSD_CMD_UNLOCK_FILESYSTEM or NFSD_CMD_UNLOCK_EXPORT netlink command, walks the NFSv4 client hash tables to revoke open state and cancel async COPY operations. All three handlers gate that walk on nn->nfsd_serv, but a listener added via portlist or netlink listener_set sets nn->nfsd_serv before any nfsd thread starts. nfsd_startup_net() has not yet allocated nn->conf_id_hashtbl, so the walkers dereference a NULL table. A local administrator with CAP_SYS_ADMIN can crash the kernel this way without ever starting the server. nn->nfsd_serv is set when the service is created, which precedes table allocation. NFSD_NET_UP instead brackets the window where the tables are live: set at the end of nfsd_startup_net() and cleared in nfsd_shutdown_net() after they are freed, both under nfsd_mutex. Gating the three unlock paths on NFSD_NET_UP fixes the startup-time NULL dereference while preserving the earlier post-shutdown use-after-free fix.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during export state revocation nfsd4_revoke_export_staCVE-2026-90038 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during export state revocation nfsd4_revoke_export_states() has the same use-after-free as nfsd4_revoke_states(): it drops nn->client_lock across revoke_one_stid() and the following read of clp->cl_minorversion, but the stateid reference it holds does not pin the client. A teardown racing the dropped lock can free the client while revoke_one_stid() still dereferences it. exportfs -u drives this path through NFSD_CMD_UNLOCK_EXPORT, so an administrator removing an export can race a client expiry. Skip a client that is already expiring and otherwise pin it with cl_rpc_users under client_lock before dropping the lock, matching nfsd4_revoke_states().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during close_lru reaping An nfs4_openowner left on nn-CVE-2026-90037 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during close_lru reaping An nfs4_openowner left on nn->close_lru after its final CLOSE keeps its last closed stateid in oo_last_closed_stid, holding only a raw pointer to its nfs4_client. The laundromat reaps timed-out entries, drops nn->client_lock, and calls nfs4_put_stid(), which dereferences the client through cl_lock. Nothing pins the client across that window, so a concurrent force_expire_client() can free it and nfs4_put_stid() reads freed memory. __destroy_client() hits the same race, walking clp->cl_openowners without cl_lock. Pin the client with cl_rpc_users before dropping client_lock, and skip clients already expiring. __destroy_client() then cleans up its own close_lru entries through release_last_closed_stateid(), so teardown no longer races the laundromat.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during blocked-lock reaping A bare lock owner -- its oCVE-2026-90036 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during blocked-lock reaping A bare lock owner -- its only remaining reference a blocked lock on nn->blocked_locks_lru -- holds a raw pointer to its nfs4_client but no reference keeping the client alive. When the per-net laundromat reaps such a lock, freeing the nbl drops the owner reference held through flc_owner, and the final nfs4_put_stateowner() takes the client's cl_lock. Because the laundromat detaches the nbl first, __destroy_client() no longer finds it, so a concurrent force_expire_client() can free the client before nfs4_put_stateowner() runs, dereferencing cl_lock in freed memory. Pin the client with cl_rpc_users before dropping nn->blocked_locks_lock, and skip clients already expiring, whose blocked locks __destroy_client() frees while holding an owner reference. Take nn->client_lock outside nn->blocked_locks_lock. Every other site holds nn->blocked_locks_lock as a leaf, acquiring no further lock, so placing nn->client_lock outside it cannot form a lock-order cycle.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix division by zero in get_estimated_bw() get_estimated_bw() divides by CVE-2026-90035 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix division by zero in get_estimated_bw() get_estimated_bw() divides by link->dpia_bw_alloc_config.bw_granularity, which is zeroed by reset_bw_alloc_struct() and only populated once DP_TUNNELING_BW_ALLOC_CAP_CHANGED has been handled. link_dp_dpia_handle_bw_alloc_status(), the DPCD interrupt handler, calls get_estimated_bw() whenever DP_TUNNELING_ESTIMATED_BW_CHANGED is set, independently of whether DP_TUNNELING_BW_ALLOC_CAP_CHANGED has ever fired for that link. A connected USB4/DPIA tunneling device that reports an estimated-bandwidth change before ever reporting a capability change drives a division by zero in this IRQ path. link_dpia_send_bw_alloc_request() already guards the same bw_granularity division; add the identical guard here rather than introducing a new pattern. (cherry picked from commit f2a961457c33dc34223aad5c9e8971de34a4eed3)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: change kmalloc() to kzalloc() Change the kmalloc() calls in usb_mdc800CVE-2026-90034 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: change kmalloc() to kzalloc() Change the kmalloc() calls in usb_mdc800_init() for irq_urb_buffer and download_urb_buffer to kzalloc(), avoiding potential stack leaks if a shorter message is received in mdc800_usb_irq() and mdc800_usb_download_notify()

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output() The snd_usbmidi_us122l_outpuCVE-2026-90033 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output() The snd_usbmidi_us122l_output() picks a count of 2 on anything slower than high speed and never relates it to ep->max_transfer. The URB buffer holds exactly max_transfer bytes, so a device declaring a one byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX. Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at 0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the USB core only clamps downward. The akai and novation output ops in this file were given the same guard recently. Do the same here.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: usbtv: keep device alive while ALSA card exists The ALSA PCM callbacks store the drCVE-2026-90032 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: media: usbtv: keep device alive while ALSA card exists The ALSA PCM callbacks store the driver state in pcm->private_data. An open PCM file can outlive USB disconnect because usbtv_audio_free() uses snd_card_free_when_closed(). The disconnect path can then drop the V4L2 device reference and free struct usbtv before ALSA releases the substream, so a later close dereferences freed memory in snd_usbtv_pcm_close(). Take a V4L2 device reference for the ALSA card and drop it from the card private_free callback. This keeps struct usbtv valid until ALSA has closed the remaining files and freed the card.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb-storage: ene_ub6250: fix race between scan work and probe ene_ub6250_probe() calls usbCVE-2026-90031 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb-storage: ene_ub6250: fix race between scan work and probe ene_ub6250_probe() calls usb_stor_probe2(), which starts the usb-storage infrastructure and schedules the delayed scan work. The driver then calls ene_get_card_type(), which sends an ENE command through ene_send_scsi_cmd() and the usb-storage bulk transfer helpers. Both the delayed scan work, through usb_stor_Bulk_max_lun(), and ene_get_card_type() use us->current_urb. The scan work serializes this access with us->dev_mutex, but the ENE card-type probe does not. If the scan work runs while ene_get_card_type() is still using us->current_urb, usb_submit_urb() warns that the URB is already active. Serialize ene_get_card_type() with us->dev_mutex, matching the locking used by the scan path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register cCVE-2026-90030 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register controls the behavior of the EndTransfer command used to stop an active transfer. Older DWC3 programming guide revisions recommended setting forceRM=1 when issuing EndTransfer. Newer programming guide revisions recommend issuing EndTransfer with forceRM cleared. With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer aborted through the ep_dequeue path was observed to remain active after EndTransfer completion. A subsequent StartTransfer issued on the same endpoint triggered writes associated with the aborted transfer. This resulted in an SMMU fault because the transfer buffer had already been unmapped during EndTransfer command-completion cleanup. Using forceRM=0 eliminates the issue. Although older DWC3 programming guide revisions recommended setting forceRM=1, no issues are known from using forceRM=0. Clear forceRM when issuing EndTransfer to provide consistent EndTransfer behavior and align with newer programming guide recommendations.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: storage: realtek_cr: fix use-after-free on disconnect realtek_cr_destructor() calls tCVE-2026-90029 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: storage: realtek_cr: fix use-after-free on disconnect realtek_cr_destructor() calls timer_delete() before the chip containing the timer is freed. The timer callback may still be running and can rearm itself, resulting in a use-after-free. Use timer_shutdown_sync() to wait for the callback and prevent further rearming. Do this unconditionally because ss_en may be changed after the timer is armed. Move timer_setup() into init_realtek_cr() so the timer is initialized before any failure path can invoke the destructor. Found by static analysis.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: typec: hd3ss3220: track VBUS enable state per consumer regulator_is_enabled() reportsCVE-2026-90028 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: typec: hd3ss3220: track VBUS enable state per consumer regulator_is_enabled() reports the aggregate regulator state, not whether this consumer holds an enable reference. If another consumer enables VBUS first, the driver can skip its own regulator_enable() call and later attempt to drop a reference it never acquired, triggering an unbalanced regulator disable warning. Track successful enable and disable calls locally. Keep the state unchanged when an operation fails so a later role or ID notification retries the operation while this consumer keeps balanced references.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop cc_debounce_dwork is queuedCVE-2026-90027 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop cc_debounce_dwork is queued from the set_cc() and start_toggling() callbacks, which run from TCPM's kthread worker. port_stop() returns before tcpm_unregister_port() destroys that worker. Flushing the worker during unregister may therefore run a callback which queues the delayed work after port_stop() has returned. The delayed work can then run after devres has freed pmic_typec_port. Use disable_delayed_work_sync() in port_stop() to cancel a pending instance and prevent the TCPM callbacks from queueing another one. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic: cancel reset_work on stop pdphy_stop() disables IRQs but leaves resCVE-2026-90026 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic: cancel reset_work on stop pdphy_stop() disables IRQs but leaves reset_work pending. If the IRQ handler schedules it just before disable_irq(), the work runs after remove() frees the struct via devm. Call cancel_work_sync() after disabling IRQs to close the window. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: displayport: Fix OOB altmode array index The UCSI displayport driver indCVE-2026-90025 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.7

  In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: displayport: Fix OOB altmode array index The UCSI displayport driver indexes the connector's port altmode array with the GET_CURRENT_CAM response after checking it is not 0xff. The port altmode array is UCSI_MAX_ALTMODES elements long. If the PPM returns an invalid GET_CURRENT_CAM response above UCSI_MAX_ALTMODES and not equal to 0xff, the kernel may crash with an array index OOB error. Update the UCSI displayport driver to verify the current cam is less than UCSI_MAX_ALTMODES before accessing the port altmode array.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs A null-pointer deCVE-2026-90024 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs A null-pointer dereference occurs in f_midi2_free_ep_reqs() when attempting to clean up an endpoint that was never initialized. When configuring the MIDI 2.0 gadget via configfs and setting the block direction to SNDRV_UMP_DIR_INPUT, the initialization of the midi1_ep_out endpoint is explicitly skipped during the gadget bind phase (f_midi2_bind()). As a result, the usb_ep->card field remains NULL. Later, when the host sets the alternate setting, f_midi2_set_alt() unconditionally stops both the IN and OUT endpoints by calling f_midi2_stop_eps(), which in turn calls f_midi2_free_ep_reqs() for both endpoints. When f_midi2_free_ep_reqs() is called for the uninitialized midi1_ep_out, it attempts to dereference usb_ep->card to determine the number of requests to free, leading to a crash. Fix this by using usb_ep->num_reqs instead of usb_ep->card->info.num_reqs in f_midi2_free_ep_reqs(). usb_ep->num_reqs is correctly set during f_midi2_init_ep() and remains 0 if the endpoint was never initialized, safely avoiding the loop. For consistency, apply

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers() CVE-2026-90023 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers() Previously fsg_num_buffers_validate() was removed as it was not necessary due to Kconfig setting the limits for n from 2 to 256 with default as 2. However, setting the page content in such a way that kstrtou8() reflects n value as either 0 or 1 bypasses these restrictions leading to a null pointer dereference if n is 0. Fix this by adding a check for n < 2 and returning -EINVAL if n is either 0 or 1 consistent with Kconfig logic.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi2: fix use-after-free in string attribute show path f_midi2_opts_str_shCVE-2026-90022 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi2: fix use-after-free in string attribute show path f_midi2_opts_str_show() takes the string lock internally, but its callers dereference the opts->info.<field> pointer before calling it, outside the lock. This races with f_midi2_opts_str_store(), which frees the old string under opts->lock when the attribute is written concurrently, the show path can read a pointer that gets freed before the lock inside str_show() is even taken. Change f_midi2_opts_str_show() to take a pointer to the string field, matching the existing pattern in f_midi2_opts_str_store(), and dereference it only after the lock is held. Update all three callers (iface_name, block name, and the EP string option macro) accordingly.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: initialize work in f_midi_alloc() f_midi_alloc initializes free_ref tCVE-2026-90021 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: initialize work in f_midi_alloc() f_midi_alloc initializes free_ref to 1 and it can only be incremented when a sound card is registered via f_midi_register_card(). f_midi_register_card() is only called in f_midi_bind() which actually performs INIT_WORK. If f_midi_bind() is never run, work is not initialized and the if condition in f_midi_free becomes true, this results in a warning later in __flush_work as work->func = 0. Fix this by moving INIT_WORK from f_midi_bind() to f_midi_alloc().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl() gadget_dev_ioctl() reads dCVE-2026-90020 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl() gadget_dev_ioctl() reads dev->gadget before acquiring dev->lock, but dev->state is checked after acquiring the lock. Therefore a concurrent bind can change the device state between these operations, which can leave ioctl with a stale NULL gadget pointer and causing a NULL pointer dereference at gadget->ops->ioctl. Read dev->gadget while holding dev->lock so that the gadget pointer and device state are sampled consistently.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: fix null pointer dereference in usb_put_function_instance() usb_put_function_CVE-2026-90019 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: fix null pointer dereference in usb_put_function_instance() usb_put_function_instance() attempts to dereference fd inside fi struct to get mod in uvc_alloc_inst() error path. However, fd is not allocated until later in try_get_usb_function_instance() after allocating fi in uvc_alloc_inst() and thus guranteed to be null in error path. Fix this by adding a null check for fi->fd that returns if fd is null.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read / stack overflow in rtw_get_wps_attr() rtw_get_wps_attr()CVE-2026-90018 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read / stack overflow in rtw_get_wps_attr() rtw_get_wps_attr() walks WPS attributes inside a WPS IE taken from a wireless management frame. For each candidate attribute it only checks that the fixed 4-byte attribute header (2-byte ID + 2-byte length) fits inside the IE: if (attr_ptr + 4 > wps_ie + wps_ielen) break; u16 attr_id = get_unaligned_be16(attr_ptr); u16 attr_data_len = get_unaligned_be16(attr_ptr + 2); u16 attr_len = attr_data_len + 4; attr_data_len (and therefore attr_len) is read directly from the wire and is never checked against the remaining bytes in the IE before being used as the size of: memcpy(buf_attr, attr_ptr, attr_len); Since attr_len is fully attacker controlled (0 to 65535+4), this is both a heap OOB read of wps_ie, and, more seriously, a stack buffer overflow at several call sites where buf_attr is a single-byte stack variable, e.g. rtw_get_wps_attr_content()'s callers passing WPS_ATTR_SELECTED_REGISTRAR into a stack "u8 sr"/"u8 selected_registrar" (drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c, drivers/staging/rtl8723bs/core/rtw_mlme_ext.c). A c

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_action_frame_parse() rtw_action_frame_parse() takeCVE-2026-90017 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_action_frame_parse() rtw_action_frame_parse() takes a frame_len parameter but never actually checks it before indexing into the frame body: const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr); ... c = frame_body[0]; ... a = frame_body[1]; frame_body already points 24 bytes (sizeof(struct ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and frame_body[1] requires frame_len >= 26. A management action frame shorter than that (e.g. exactly 24 bytes, the minimum a malicious peer can send) causes a 1-2 byte out-of-bounds read. This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass attacker/user-influenced frame buffers and lengths straight through. Add the missing length check before frame_body is dereferenced.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie() rtw_restruct_wmm_ie() scans in_iCVE-2026-90016 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie() rtw_restruct_wmm_ie() scans in_ie for a WMM IE with: while (i < in_len) { ... if (i + 5 < in_len && in_ie[i] == 0xDD && ...) { ... break; } i += (in_ie[i + 1] + 2); /* to the next IE element */ } When the "i + 5 < in_len" match check fails simply because i is within 5 bytes of the end of the buffer (i.e. no WMM IE was found near the tail of in_ie), execution falls through to "i += (in_ie[i + 1] + 2)", which reads in_ie[i + 1]. If i == in_len - 1 at that point, this is a 1-byte out-of-bounds read of an attacker-influenced IE buffer built from association/scan data. Commit a75281626fc8f ("staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie") added the "i + 5 < in_len" guard to the match condition itself, but did not add an equivalent guard before the fallthrough advance, so the same class of OOB read remained reachable through the non-matching path. Add an explicit bounds check before advancing to the next IE.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: xhci: fix lost bounce buffers on TDs spanning several ring segments When a TD reaches a liCVE-2026-90015 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: xhci: fix lost bounce buffers on TDs spanning several ring segments When a TD reaches a link TRB with data that is not aligned to the endpoint's wMaxPacketSize, xhci_align_td() stages the unalignable tail through the bounce buffer of the ring segment holding that link TRB. xhci_unmap_td_bounce_buffer() later unmaps it and, for IN transfers, copies the data back into the URB's buffer. The enqueue path records the segment that was bounced in td->bounce_seg, under the assumption that a TD never spans more than two ring segments. That assumption does not hold: a TD large enough to span three or more segments crosses several link TRBs and can be bounced at each of them. Only the last one survives in td->bounce_seg, so every earlier bounce buffer is neither copied back nor DMA unmapped. The URB still completes with actual_length equal to the requested length and no error, so the transfer looks successful while a wMaxPacketSize sized hole in the destination buffer silently keeps its previous contents. It also leaks a DMA mapping per dropped bounce. Any sufficiently large and fragmented bulk transfer can hit this. It

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Have show_event_filters/triggers files take trace array ref The newly added filesCVE-2026-90014 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tracing: Have show_event_filters/triggers files take trace array ref The newly added files show_event_filters and show_event_triggers that show all filters or triggers that are set within the trace array do not take a reference for the trace array it is showing. Without taking a reference, the trace_array may be freed via "rmdir" while a task is reading one of theses files. Those files iterate all the events within an instance (trace_array) and nothing prevents that instance from being freed while its data is being read. This causes a use-after-free crash. Have the open of both those files take the trace_array reference via the trace_array_get() that prevents the trace_array from being freed while the files are opened.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening options file The options files do not takCVE-2026-90013 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening options file The options files do not take the trace_array reference for the options they represent. This could cause a use-after-free kernel crash if one of these files is opened by one task and another task removes the instance that the option is for. Because it doesn't take a reference upon opening, it will not stop the removal which will free the options descriptor that is being used. As the options are somewhat dynamic in their creation at boot up, each file represents a flag in the trace_array. The trace_array has an array of indexes to represent each of these flags that is stored in the trace_flags_index array. The address of the index array element is used to pass to the inode->i_private pointer. Then that element is read which holds the index (which represents the flag) and then the index is used to calculate the trace_array descriptor from its trace_flags_index array. One issue is that the index element can not be referenced until the trace_array's reference is taken. To handle this, create a new helper function called: trace_array_options_get() that wi

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: spi: Fix DMA mapping ownership on partial map failure If RX mapping fails after TX mappingCVE-2026-90012 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: spi: Fix DMA mapping ownership on partial map failure If RX mapping fails after TX mapping succeeds, __spi_map_msg() unmaps TX but leaves tx_sg_mapped set. If TX mapping fails on a later transfer, mappings created for earlier transfers remain active. In both cases, cur_{tx,rx}_dma_dev have not yet been updated because they are assigned only after every transfer has been mapped. The subsequent spi_unmap_msg() may therefore unmap the TX mapping again or release earlier mappings using a NULL or stale device. Using a NULL device can trigger an oops. An empty SG table does not prevent the NULL dereference because dma_unmap_sg_attrs() accesses the device before checking the entry count. Publish both mapping devices before mapping starts and unwind all failures through __spi_unmap_msg(). This clears the mapping flags and releases each mapping once with the device that created it. Publishing the devices before the loop also refreshes them when no transfer needs mapping. No mapping flag is set in that case, so current users do not use the pointers as mapping owners.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Reserve a terminator byte for the login payload iscsi_target_check_loCVE-2026-90011 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Reserve a terminator byte for the login payload iscsi_target_check_login_request() rejects a login PDU whose DataSegmentLength exceeds MAX_KEY_VALUE_PAIRS, but the test is '>' and login->req_buf is allocated with exactly MAX_KEY_VALUE_PAIRS bytes. Since iscsit_get_login_rx() receives payload_length + padding bytes, where padding = ((-payload_length) & 3); any payload_length from 8189 to 8192 fills the whole 8192 byte buffer. The write stays in bounds, but no byte is left for a NUL terminator. The buffer is subsequently consumed as a C string. In the CHAP path chap_check_algorithm() calls kstrdup(a_str), and extract_param() calls strstr(in_buf, pattern) followed by strlen_semi(), none of which take a length. convert_null_to_semi() additionally rewrites every embedded NUL to ';', so even a payload made of well formed NUL separated key=value records is left without a terminator. These walk past the end of the object into adjacent slab memory. It is reachable by an unauthenticated initiator against a portal configured for CHAP; when authentication is not required iscsi_login_zero_tsih_s2() re

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Cap io_uring sense copy to max_response_len Completion copied scmd->sense_len tCVE-2026-90010 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Cap io_uring sense copy to max_response_len Completion copied scmd->sense_len to the user response buffer without honoring max_response_len. After a valid sense, the midlayer sets sense_len to the real length (up to SCSI_SENSE_BUFFERSIZE), so a smaller user buffer was overrun.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Fix TOCTOU in io_uring passthrough command setup scsi_bsg_uring_cmd() reads bsgCVE-2026-90009 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Fix TOCTOU in io_uring passthrough command setup scsi_bsg_uring_cmd() reads bsg_uring_cmd from the shared mmap'd SQE. Userspace can change a field after we check it and before we use it. request_len is the sharp case: it can grow past sizeof(scmd->cmnd) after the bound check and overflow scmd->cmnd in copy_from_user(). READ_ONCE() the SQE fields we check or use into locals before use.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Limit NVMe request size to the PRP chain frame megasas_make_prp_nvme()CVE-2026-90008 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Limit NVMe request size to the PRP chain frame megasas_make_prp_nvme() builds a command's PRP list in cmd->sg_frame, a DMA pool buffer of instance->max_chain_frame_sz bytes, spending one entry per NVMe page of the transfer plus one per page of the buffer for the chain pointer. The loop runs until the transfer is described and never checks the buffer bound. max_hw_sectors comes straight from the MDTS the firmware reports for the drive. On drives with a large MDTS the only thing keeping the list inside the buffer was the block layer default of 1280 KiB, which needs 320 entries, which fit into a 4 KiB frame as that holds 512. But since commit 9b8b84879d4a ("block: Increase BLK_DEF_MAX_SECTORS_CAP") that default is 4 MiB, and such a transfer needs 1025 entries, so the list runs a full page past the end of the frame: sd 1:0:1:0: [sdb] tag#630 page boundary ptr_sgl: 0x00000000ba62d13f BUG: unable to handle page fault for address: ff663bcb81e7c000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:megasas_build_and_issue_cmd_fusion+0xeaa/0x187

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Use rollback index when freeing MSI-X vectors pm8001_request_msix() unwinds CVE-2026-90007 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Use rollback index when freeing MSI-X vectors pm8001_request_msix() unwinds previously registered handlers with free_irq() when request_irq() fails. The rollback loop uses the failing index i for every iteration instead of the already registered vector index j. That passes the wrong IRQ/dev_id pair to free_irq() and leaves the earlier handlers installed. Use j for both pci_irq_vector() and the matching irq_vector entry in the rollback loop.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: samples/damon/mtier: handle damon_stop() failure damon_sample_mtier_stop() assumes its damCVE-2026-90006 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: samples/damon/mtier: handle damon_stop() failure damon_sample_mtier_stop() assumes its damon_stop() call will always successfully stops the two DAMON contexts. Hence it deallocates the two DAMON contexts after the damon_stop() call. However, if a given context is already stopped, damon_stop() fails and returns an error while letting the DAMON contexts that have not yet stopped keep running. This kind of unexpected early DAMON context stops could happen due to memory allocation failures in kdamond_fn(). Because damon_sample_mtier_stop() just deallocates all DAMON contexts with damon_target and damon_region objects that are linked to the contexts, the execution of the unstopped DAMON context (kdamond) ends up using the memory that freed (use-after-free). Fix the issue by separating the damon_stop() to be invoked per context. Note that DAMON_SYSFS also allows multiple DAMON contexts execution. But, it calls damon_stop() for each context one by one. Hence this issue is only in mtier. For the long term, it would be better to refactor damon_stop() to always ensure stopping all contexts regardless of the failur

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: samples/damon/wsse: handle damon_start() failure Patch series "samples/damon: handle damonCVE-2026-90005 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: samples/damon/wsse: handle damon_start() failure Patch series "samples/damon: handle damon_{start,stop}() failures". All DAMON sample modules are not correctly handling failures from damon_start(). Among those, mtier also has an additional problem for handling of damon_stop() failures. wsse and prcl also have a problem in their damon_call() failure handling. As a result, memory leaks, next DAMON operation disruptions, and use-after-free can happen. Fix those. Note that only the damon_start() failure caused issues can reliably be reproduced. Reproducing those issues require the admin permission, though. This patch (of 6): damon_sample_wsse_start() callers assume it will clean up resources when it fails. And the function does the cleanup for context buildup failures. However, it is not doing the cleanup for damon_start() failure. As a result, when damon_start() fails, it leaks the memory for DAMON context. Free the context in case of the failure to fix the issues. Note that the issue can reliably be reproduced because the module calls damon_start() in the exclusive mode. For example, $ sudo damo

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: handle region split failure in apply_min_nr_regions() damon_apply_min_nr_reCVE-2026-90004 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: handle region split failure in apply_min_nr_regions() damon_apply_min_nr_regions() repeatedly split each region until its size becomes small enough to meet the user-defined low limit of the number of regions. The loop assumes the split operation (damon_split_region_at()) will always succeed and create the new region. But the operation could silently fail for memory allocation failures, for example. If such failure happens and the region was the last region, the linked list-based next region fetching returns invalid pointer. As a result, invalid memory dereference and corruption could happen. Even if the corner case is handled, it imposes stress to the allocator by trying split regions for other targets. Fix the issue by breaking all the loops for any region split failure. This means there could be a min_nr_regions violation. It will only rarely happen since the allocation is arguably too small to fail. Even if it happens, it is only temporal. damon_apply_min_nr_regions() will be called again after the aggregation interval. The user impact of the issue should be minor, since the allocatio

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: futex: Prevent rcuwait use-after-free during requeue PI On PREEMPT_RT, FUTEX_CMP_REQUEUE_PCVE-2026-90003 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: futex: Prevent rcuwait use-after-free during requeue PI On PREEMPT_RT, FUTEX_CMP_REQUEUE_PI can trigger a KASAN report (slab-out-of-bounds) in futex_requeue_pi_complete() invocation of rcuwait_wake_up(). The futex_q used by futex_wait_requeue_pi() is allocated on the waiter's stack. An early wakeup can race with a PI requeue as follows: waiter requeue task ------ ------------ futex_wait_requeue_pi() futex_do_wait() schedule() futex_requeue futex_proxy_trylock_atomic() futex_requeue_pi_prepare() Q_REQUEUE_PI_NONE -> Q_REQUEUE_PI_IN_PROGRESS * timeout/ signal wakes waiter * futex_requeue_pi_wakeup_sync() Q_REQUEUE_PI_IN_PROGRESS -> Q_REQUEUE_PI_WAIT requeue_pi_wake_futex futex_requeue_pi_complete() cmpxchg Q_REQUEUE_PI_WAIT -> Q_REQUEUE_PI_L

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: ftrace: Take trace_array reference before accessing its ftrace_ops The trace instance fileCVE-2026-90002 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ftrace: Take trace_array reference before accessing its ftrace_ops The trace instance files set_ftrace_filter and set_ftrace_notrace was updated to work with specific trace instances (trace_arrays). The issue is that when these files are opened, there is a small race window where it will use the ftrace_ops from the inode->private pointer to get a reference to the trace_array and then take its reference. The problem is that the ftrace_ops itself could be freed. If the rmdir on the instance happens at the same time the set_ftrace_filter file is opened, the rmdir could have also freed the ftrace_ops and referencing it will cause a use-after-free bug and crash the kernel. Instead, pass in the trace_array as the file private data (NULL for the top level instance), and then pass both the trace_array and the ftrace_ops to the ftrace_regex_open() function. If the trace_array is NULL, then it just uses the ftrace_ops without the need to take its reference (like normal). If the ftrace_ops is NULL, that is only the case for the top level instance and the global_ops can be used. This allows the trace_array to have its refe

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: HID: bpf: serialize device reference release in struct_ops destroy path __hid_bpf_ops_destCVE-2026-90001 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: HID: bpf: serialize device reference release in struct_ops destroy path __hid_bpf_ops_destroy_device() and hid_bpf_unreg() can race on the same registration reference, double-putting struct hid_device and freeing it while hid_destroy_device() still uses it. Serialize the remove/NULL decision under hdev->bpf.prog_list_lock so exactly one path releases each registration reference: unreg re-checks ops->hdev under the lock and returns without putting when the destroy path already cleared it; all put_device() calls happen after the lock is dropped, which is safe because a concurrent unreg then observes ops->hdev == NULL under the lock. Background: each successful attach (hid_bpf_ops_reg) acquires one device reference (hid_get_device()). Two paths can release it: - device destruction: hid_destroy_device() -> hid_bpf_destroy_device() -> __hid_bpf_ops_destroy_device(), which walks hdev->bpf.prog_list under rcu_read_lock() and drops one reference per attached program; - BPF link release: bpf map delete (no BPF_F_LINK) synchronously calls st_ops->unreg() -> hid_bpf_unreg(), which drops the reference for its own

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: HID: rmi: fix OOB access with undersized RMI reports The hid-rmi driver sizes its writeRepCVE-2026-90000 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: HID: rmi: fix OOB access with undersized RMI reports The hid-rmi driver sizes its writeReport/readReport buffer purely from the report descriptor supplied by the device, with no minimum bound: data->input_report_size = hid_report_len(input_report); data->output_report_size = hid_report_len(output_report); alloc_size = data->output_report_size + data->input_report_size; data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); data->readReport = data->writeReport + data->output_report_size; but then reads and writes fixed offsets into it. A device declaring a 1-byte output and a 1-byte input report makes hid_report_len() return 2 for each, so alloc_size is 4, while rmi_set_page() -- reached unconditionally at probe time through rmi_input_configured() -- stores writeReport[4] and rmi_hid_read_block() stores writeReport[0..5]. Since readReport lives at writeReport + output_report_size, those stores also corrupt the window the next reply is parsed out of. The read path is worse: the copy length comes from readReport[1], which the device fills in and can be up to 255, and the copy starts at &rea

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: HID: wacom: validate report length in wacom_intuos_pro2_bt_irq wacom_intuos_pro2_bt_irq() CVE-2026-89999 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: HID: wacom: validate report length in wacom_intuos_pro2_bt_irq wacom_intuos_pro2_bt_irq() receives the wire report length in `len` but never consults it before parsing. After the report-id gate it unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by features.type, a fixed chain of sub-parsers, none of which receive `len`: wacom_intuos_pro2_bt_pen(wacom); if (type == INTUOSP2_BT || type == INTUOSP2S_BT) { wacom_intuos_pro2_bt_touch(wacom); wacom_intuos_pro2_bt_pad(wacom); wacom_intuos_pro2_bt_battery(wacom); } else { wacom_intuos_gen3_bt_pad(wacom); wacom_intuos_gen3_bt_battery(wacom); } Each sub-parser dereferences wacom->data at fixed offsets. The furthest byte touched on each branch is: INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285] (the touchring byte), so the report must be at least 286 bytes; INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45], so the report must be at least 46 bytes. features.type is selected from the VID/PID id_table entry and wacom_setup_device_quirks() force-registers the pen/pad/touch inputs for that type

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: dm: fix race when loading and unloading a table If the userspace calls two concurrent tablCVE-2026-89998 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dm: fix race when loading and unloading a table If the userspace calls two concurrent table load ioctls and one of them succeeds and the other fails, there is a race condition because dm_setup_md_queue walks &md->table_devices without any lock. If the walk races with dm_table_destroy -> free_devices -> dm_put_table_device, there is access to invalid memory. Fix this race by extending the lock over the list walk.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: dm: fix resume-vs-remove race If the user issues the resume ioctl and the remove ioctl at CVE-2026-89997 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dm: fix resume-vs-remove race If the user issues the resume ioctl and the remove ioctl at the same time, it may be possible that the device is resumed after it is suspended in __dm_destroy. The result is that the table is destroyed without calling the postsuspend method. Dm targets expect that they may be removed only after the postsuspend method method was called. If we break this expectation, it can cause misbehavior in various targets. For example - in the dm-integrity target, the reboot notifier is not unregistered, leading to use-after-free. Fix this bug by refusing to resume if the device is being destroyed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: dma-buf: dma-heap: don't publish fd before copy_to_user() succeeds DMA_HEAP_IOCTL_ALLOC alCVE-2026-89996 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dma-buf: dma-heap: don't publish fd before copy_to_user() succeeds DMA_HEAP_IOCTL_ALLOC allocates a dma-buf and installs an fd into the caller's fd table via dma_buf_fd() -> fd_install() before dma_heap_ioctl() copies the result back to userspace. If the trailing copy_to_user() fails, userspace never learns the fd number, but the fd (and the underlying dma-buf reference) are already visible to other threads in the same process and are leaked for the lifetime of the process. The obvious "close it on the failure path" fix is unsafe: once fd_install() has run, another thread can already dup() the fd, send it via SCM_RIGHTS, or close() it and let its number be reused, so a subsequent close_fd() from the ioctl path can operate on an unrelated file. This was pointed out by Christian König on v1 [1]. Restructure the allocation path so that fd_install() is the last, unfailable step of a successful ioctl: 1. heap->ops->allocate() creates the dma_buf. 2. get_unused_fd_flags() reserves an fd number in the caller's fd table without publishing it, so

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: dma-direct: return struct page from dma_direct_alloc_from_pool() Commit 5b138c534fda ("dmaCVE-2026-89995 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: dma-direct: return struct page from dma_direct_alloc_from_pool() Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool helper") changed dma_direct_alloc_from_pool() to return the CPU address from dma_alloc_from_pool(). That fits dma_direct_alloc(), but dma_direct_alloc_pages() also uses the helper and expects a struct page *. Fix this by making dma_direct_alloc_from_pool() return the struct page * again, and pass the CPU address back through an out-parameter for the dma_direct_alloc() caller.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-edma: tracing: no ptr dereference during log output The fsl edma events stoCVE-2026-89994 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-edma: tracing: no ptr dereference during log output The fsl edma events store a pointer to a struct fsl_edma_engine in the ringbuffer and dereference it when a log entry is printed. At this time, the pointer may no longer be valid. Event injection can be used to trigger a crash: $ cd /sys/kernel/tracing $ echo 'value = 0' > events/fsl_edma/edma_writeb/inject $ cat trace The log output needs only edma->membase. Add a membase field at the end of the event and use the new field for log output. Keep the existing fields for backward compatibility.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Initialize IRQ data before requesting IRQs dw_edma_irq_request() passeCVE-2026-89993 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Initialize IRQ data before requesting IRQs dw_edma_irq_request() passes struct dw_edma_irq to request_irq() before dw_edma_channel_setup() fills the back pointer. A shared interrupt can therefore enter the handler with dw_irq->dw still NULL, leading to a NULL pointer dereference. Set the back pointer before installing each handler.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.