Vulnerability database

1,182 results · page 5 of 24

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve pointer spill metadata during half-slot cleanup __clean_func_state() cleans CVE-2026-72426 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve pointer spill metadata during half-slot cleanup __clean_func_state() cleans dead stack slots in 4-byte halves. When the high half of a STACK_SPILL slot is dead and the low half remains live, cleanup converts the live low half to STACK_MISC or STACK_ZERO and clears the saved spilled_ptr metadata. That conversion is safe only for scalar spills. For a pointer spill, this metadata clear lets a later 32-bit fill from the still-live half avoid the normal non-scalar register-fill check and be treated as an ordinary scalar stack read. Leave non-scalar spill slots intact in this half-live shape. This is conservative for pruning and preserves the existing check_stack_read_fixed_off() rejection path for partial fills from pointer spills.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: sungem: fix probe error cleanup gem_init_one() calls gem_remove_one() when register_nCVE-2026-72406 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net: sungem: fix probe error cleanup gem_init_one() calls gem_remove_one() when register_netdev() fails. gem_remove_one() unregisters and frees resources owned by the net_device, including the DMA block, MMIO mapping, PCI regions, and the net_device itself. gem_init_one() then falls through to its own cleanup labels and frees the same resources again. Keep the register_netdev() error path in gem_init_one(): clear drvdata so PM/remove paths do not see a half-registered device, remove the NAPI instance added during probe, and let the existing cleanup labels release the resources once. The issue was found by a local static-analysis checker for probe error paths. The reported path was manually inspected before sending this fix. Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed because no sungem hardware is available.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy() TIPC UDP media bearCVE-2026-72404 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy() TIPC UDP media bearer teardown calls dst_cache_destroy() on its replicast caches before calling synchronize_net() to wait for concurrent RCU readers (transmitters) to finish: static void cleanup_bearer(struct work_struct *work) { ... list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) { dst_cache_destroy(&rcast->dst_cache); list_del_rcu(&rcast->list); kfree_rcu(rcast, rcu); } ... dst_cache_destroy(&ub->rcast.dst_cache); udp_tunnel_sock_release(ub->sk); synchronize_net(); ... } This is highly buggy because dst_cache_destroy() immediately frees the per-CPU cache memory (free_percpu()) and releases the cached dst entries without any synchronization. If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another CPU under RCU protection, it can call dst_cache_get() concurrently, leading to: 1. Use-After-Free on the per-CPU cache pointer itself (crash). 2. "rcuref - imbalanced put()" warning if it attempts to release a dst that was concurrently released by dst_cache_destroy(). Furthermore, calling kfree(ub) imme

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: irqchip/ts4800: Fix missing chained handler cleanup on remove The driver installs a chaineCVE-2026-72384 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: irqchip/ts4800: Fix missing chained handler cleanup on remove The driver installs a chained handler for the parent interrupt during probe using irq_set_chained_handler_and_data(), but the remove function does not clear this handler. This leaves a dangling handler that may be called when the parent interrupt fires after the driver has been removed, potentially accessing freed memory and causing a kernel crash. Additionally, the parent_irq obtained via irq_of_parse_and_map() is not stored, making it inaccessible in the remove function. Moreover, interrupt mappings created during probe are not properly disposed. Fix this by: - Saving parent_irq in probe - Clearing the chained handler with NULL in ts4800_ic_remove() - Disposing all IRQ mappings before domain removal to prevent resource leaks

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, skip peer flow cleanup when LAG seq is unavailable mlx5_lag_get_dev_seq() wCVE-2026-72344 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, skip peer flow cleanup when LAG seq is unavailable mlx5_lag_get_dev_seq() will return error when the peer isn't in the LAG or when no device is marked as master. Result bad memory access and kernel crash[1]. Hence, skip the peer when lookup fails. Note: In case there are peer flows, they are cleaned before LAG cleared the master mark. [1] RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0x3d/0x350 [mlx5_core] Call Trace: <TASK> mlx5e_tc_clean_fdb_peer_flows+0xc1/0x130 [mlx5_core] mlx5_esw_offloads_unpair+0x3a/0x400 [mlx5_core] mlx5_esw_offloads_devcom_event+0xee/0x360 [mlx5_core] mlx5_devcom_send_event+0x7a/0x140 [mlx5_core] mlx5_esw_offloads_devcom_cleanup+0x2f/0x90 [mlx5_core] mlx5e_tc_esw_cleanup+0x28/0xf0 [mlx5_core] mlx5e_rep_tc_cleanup+0x19/0x30 [mlx5_core] mlx5e_cleanup_uplink_rep_tx+0x36/0x40 [mlx5_core] mlx5e_cleanup_rep_tx+0x55/0x60 [mlx5_core] mlx5e_detach_netdev+0x96/0xf0 [mlx5_core] mlx5e_netdev_change_profile+0x5b/0x120 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] mlx5e_vport_rep_unload+0xdd/0x110 [mlx5_core] __esw_offloads_unload_rep+0x81/0xb0 [mlx5_core]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix adv monitor add failure cleanup hci_add_adv_monitor() publishes a newCVE-2026-72335 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix adv monitor add failure cleanup hci_add_adv_monitor() publishes a new adv_monitor in hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT offload add path can then fail either locally before the controller add command completes, or in the MSFT add callback. In the current queued management add flow, hci_cmd_sync_work() still invokes mgmt_add_adv_patterns_monitor_complete() with the original pending command after msft_add_monitor_pattern() returns. The buggy scenario involves two paths, with each column showing the order within that path: MSFT add handling MGMT completion 1. insert monitor and handle 1. receive sync error 2. send MSFT add command 2. call add-monitor completion 3. callback sees bad response 3. load cmd->user_data 4. callback frees monitor 4. read monitor->handle Local MSFT setup failures have the other half of the same ownership bug: they return an error after the IDR insertion, but no later code removes the failed monitor from the IDR. Keep ownership with the pending management command until its completion. For

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8192: Release reserved memory on cleanup The MT8192 AFE probe calls of_rCVE-2026-72259 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8192: Release reserved memory on cleanup The MT8192 AFE probe calls of_reserved_mem_device_init() and falls back to preallocated buffers when no reserved memory region is available. When the reserved memory assignment succeeds, however, the driver never releases it. Register a devm cleanup action after a successful reserved-memory assignment so the assignment is released on probe failure and driver unbind.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8183: Release reserved memory on cleanup The MT8183 AFE probe can assignCVE-2026-72258 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8183: Release reserved memory on cleanup The MT8183 AFE probe can assign reserved memory with of_reserved_mem_device_init(), but the assignment is never released on driver removal or later probe failures. Register a devm cleanup action so the reserved memory assignment is released consistently, matching newer Mediatek AFE drivers.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: batman-adv: clean untagged VLAN on netdev registration failure When an mesh interface is rCVE-2026-72229 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: batman-adv: clean untagged VLAN on netdev registration failure When an mesh interface is registered, it creates an untagged struct batadv_meshif_vlan on top of it via the NETDEV_REGISTER notifier. But in this process, another receiver of this notification can veto the registration. The netdev registration will be aborted because of this veto. The register_netdevice() call will try to clean up the net_device using unregister_netdevice_queue() - which only uses the .priv_destructor to free private resources. In this situation, .dellink will not be called. The cleanup of the untagged batadv_meshif_vlan must thefore be done in the destructor to avoid a leak of this object.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86/intel/tpmi: use cleanup helpers in mem_write() In mem_write(), the temporary CVE-2026-72145 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: platform/x86/intel/tpmi: use cleanup helpers in mem_write() In mem_write(), the temporary array returned by parse_int_array_user() must be released on all exit paths. Convert the array variable to use cleanup.h scope-based cleanup so it is freed automatically on return. This also moves the array declaration next to parse_int_array_user() as required by cleanup.h usage guidelines.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializesCVE-2026-72144 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializes several resources after dell_setup_rfkill(), including the optional touchpad LED, keyboard backlight LED, battery hook, debugfs directory and dell-laptop notifier. If a later LED or backlight registration fails, the error path only tears down the battery hook and rfkill resources. This leaves the notifier, debugfs directory, keyboard backlight LED and optional touchpad LED registered after dell_init() returns an error. Add the missing cleanup calls before tearing down rfkill.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: ena: clean up XDP TX queues when regular TX setup fails create_queues_with_size_backoCVE-2026-72056 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: ena: clean up XDP TX queues when regular TX setup fails create_queues_with_size_backoff() creates XDP TX queues before setting up the regular TX path. If the subsequent allocation or creation of regular TX queues fails, the error handling paths omit the teardown of the XDP TX queues, leading to a resource leak. Fix this by explicitly destroying the XDP TX queue subset at the two missing failure points. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have an ENA device to test with, no runtime testing was able to be performed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: Fix possible nullptr KP in HWV cleanup/on-check Should probe fail for CVE-2026-72008 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: Fix possible nullptr KP in HWV cleanup/on-check Should probe fail for HW_VOTER type power domains, this driver was unconditionally trying to perform cleanup for DIRECT_CTL domains, but only after checking if the target domain is powered on... with the DIRECT_CTL scpsys_domain_is_on() code again. And there's more: the scpsys_domain_is_on() function is also being unconditionally used in the probe path, for any power domain that has flag MTK_SCPD_KEEP_DEFAULT_OFF! This bug was never experienced by anyone because the HWV domains never failed probe, and because none of those is declared with the aforementioned flag - but it's still something critical. In order to fix this, add a check for MTCMOS Type and, based on that, call the correct functions for an "is on" check, and also do the same for the cleanup path, calling the correct functions for the "power off" action. For the latter, since there's a call to pm_genpd_remove() right before calling power_off, be cautious and add a variation of the power off functions (with a _internal suffix) for those to get a pointer to scpsys_domain instead of o

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 14, 2026In OpenStack Ironic before 38.0.1, the autodetect deploy interface may fail to run cleaning immediately after enrollment with, or changing to, the autodetect deCVE-2026-74250 · Other software · OpenStack · reported by MITREMedium 6.3

  In OpenStack Ironic before 38.0.1, the autodetect deploy interface may fail to run cleaning immediately after enrollment with, or changing to, the autodetect deploy interface.

  Product

  Ironic

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordbugs.launchpad.net

• Aug 14, 2026SiYuan versions before v3.7.4 contain an information disclosure vulnerability in the getRefIDsByFileAnnotationID endpoint that returns block identifiers citing CVE-2026-73048 · Other software · siyuan-note · reported by VulnCheckMedium 6.9

  SiYuan versions before v3.7.4 contain an information disclosure vulnerability in the getRefIDsByFileAnnotationID endpoint that returns block identifiers citing PDF annotations without publish-access filtering. Attackers can extract block identifiers from restricted documents by supplying annotation identifiers visible in published pages, revealing citation relationships across forbidden and password-protected tiers.

  Product

  siyuan

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Aug 13, 2026Samex - Clean, Minimal Shop WooCommerce: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')CVE-2026-28154 · WordPress plugins & themes · reported by PatchstackHigh 7.1

  Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in snstheme Samex - Clean, Minimal Shop WooCommerce WordPress Theme and snstheme M.Anh - Fashion WooCoommerce WordPress Theme allows Reflected XSS. This issue affects Samex - Clean, Minimal Shop WooCommerce WordPress Theme: from n/a through 2.5; M.Anh - Fashion WooCoommerce WordPress Theme: from n/a through 1.7.

  Product

  Samex - Clean, Minimal Shop WooCommerce

  Affected

  up to 2.5

  What to do

  Affects up to 2.5. Update Samex - Clean, Minimal Shop WooCommerce to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordpatchstack.compatchstack.com

• Aug 13, 2026Unauthenticated Broken Access Control in Anti Spam and list cleaner &#8211; AcyChecker <= 2.0.0 versions.CVE-2026-66689 · WordPress plugins & themes · reported by PatchstackMedium 6.3

  Unauthenticated Broken Access Control in Anti Spam and list cleaner &#8211; AcyChecker <= 2.0.0 versions.

  Affected

  up to 2.0.0

  What to do

  Affects up to 2.0.0. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordpatchstack.com

• Aug 13, 2026Serendipity versions >= 2.3.5 and <= 2.6.0 contain a reflected cross-site scripting vulnerability in the search clean-URL route (/search/<term>).CVE-2026-73628 · Other software · s9y · reported by VulnCheckMedium 5.3

  Serendipity versions >= 2.3.5 and <= 2.6.0 contain a reflected cross-site scripting vulnerability in the search clean-URL route (/search/<term>). In include/functions_routing.inc.php serveSearch(), the sanitisation pipeline runs urldecode() after HTML-encoding, so a single URL-encoded HTML payload survives strip_tags() and htmlspecialchars() and is then decoded back into live HTML in the page. A crafted search link can execute arbitrary JavaScript in the victim's browser. Fixed in 2.6.1.

  Product

  Serendipity

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Aug 12, 2026SiYuan versions up to and including v3.7.2 (fixed in v3.7.4) contain an information disclosure vulnerability in the /api/asset/getFileAnnotation endpoint, whichCVE-2026-72808 · Other software · siyuan-note · reported by VulnCheckMedium 6.9

  SiYuan versions up to and including v3.7.2 (fixed in v3.7.4) contain an information disclosure vulnerability in the /api/asset/getFileAnnotation endpoint, which returns .sya PDF-annotation file content without a publish-access check. Because the endpoint is gated only by CheckAuth (unlike the /assets/* route, which enforces publish access and password), an anonymous reader (when publish authentication is disabled) or any publish RoleReader who knows an asset path can read the private PDF annotations (highlights and notes) of publish-forbidden, password-protected, or unpublished documents. The issue is limited to non-encrypted notebooks; encrypted-box annotations are not exposed.

  Product

  siyuan

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Aug 11, 2026Incomplete cleanup in some UEFI firmware for some Intel(R) reference platforms within UEFI may allow an information disclosure.CVE-2026-20712 · Other software · reported by secure@intel.comMedium 4

  Incomplete cleanup in some UEFI firmware for some Intel(R) reference platforms within UEFI may allow an information disclosure. System software adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (high), integrity (none) and availability (none) impacts.

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordintel.com

• Aug 11, 2026Incomplete cleanup in Microsoft Office PowerPoint allows an unauthorized attacker to disclose information locally.CVE-2026-68809 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comMedium 5.5

  Incomplete cleanup in Microsoft Office PowerPoint allows an unauthorized attacker to disclose information locally.

  Product

  Microsoft 365 Apps for Enterprise

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordmsrc.microsoft.com

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: initialize SDIO data work before cleanup brcmf_sdio_probe() stores the newCVE-2026-68403 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: initialize SDIO data work before cleanup brcmf_sdio_probe() stores the newly allocated bus in sdiodev->bus before allocating the ordered workqueue. If that allocation fails, the function jumps to fail and calls brcmf_sdio_remove(). brcmf_sdio_remove() unconditionally cancels bus->datawork. Initialize the work item before the first failure path that can reach brcmf_sdio_remove(), so the cleanup path always observes a valid work object. This issue was found by our static analysis tool and then confirmed by manual review of the probe error path and the remove-time work drain. The problem pattern is an early setup failure that reaches a cleanup helper which cancels an embedded work item before its initializer has run. A QEMU PoC forced alloc_ordered_workqueue() to fail at the same point in brcmf_sdio_probe(), before INIT_WORK(&bus->datawork) is reached. The resulting fail path calls brcmf_sdio_remove(), and DEBUG_OBJECTS reports the invalid work drain with brcmf_sdio_probe() and brcmf_sdio_remove() in the stack.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: tipc: serialize udp bearer replicast list updates tipc_udp_rcast_add() and cleanup_bearer(CVE-2026-68323 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tipc: serialize udp bearer replicast list updates tipc_udp_rcast_add() and cleanup_bearer() both update ub->rcast.list with list_add_rcu() / list_del_rcu(), but nothing serializes them. The add runs from the encap receive softirq (via tipc_udp_rcast_disc()) without rtnl_lock(), so it can race the cleanup delete and corrupt the list: list_del corruption. prev->next should be ffff8880298d7ab8, but was ffff88802449ad38. (prev=ffff888027e3ec98) kernel BUG at lib/list_debug.c:62! RIP: __list_del_entry_valid_or_report+0x17a/0x200 Workqueue: events cleanup_bearer Call Trace: cleanup_bearer (net/tipc/udp_media.c:811) process_one_work (kernel/workqueue.c:3302) worker_thread (kernel/workqueue.c:3466) The bearer can be enabled from an unprivileged user namespace, as the TIPCv2 generic-netlink ops carry no GENL_ADMIN_PERM. Add a spinlock to struct udp_bearer and take it around the list_add_rcu() in tipc_udp_rcast_add() and the list_del_rcu() loop in cleanup_bearer() so the two writers can no longer corrupt the list. Reject a duplicate peer under the same lock before allocating, and remove tipc_udp_

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: net: mctp i3c: clean up notifier and buses if driver register fails mctp_i3c_mod_init() reCVE-2026-68314 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net: mctp i3c: clean up notifier and buses if driver register fails mctp_i3c_mod_init() registers the I3C bus notifier and then walks the existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL) before registering the I3C device driver. If i3c_driver_register() fails, the function returns the error directly, leaving the notifier registered and every mctp_i3c_bus object created for the existing buses allocated. The notifier is left pointing into the module that failed to load and the bus list is leaked. Mirror the module exit path on this failure: unregister the notifier and tear down the buses that were added before returning the error. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx: fix cleaner shader IB buffer overflow The cleaner shader sysfs path allocaCVE-2026-68276 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx: fix cleaner shader IB buffer overflow The cleaner shader sysfs path allocates a 16-dword (64 byte) IB but incorrectly fills (align_mask + 1) dwords. On GFX rings align_mask is 0xff, so the loop wrote 256 dwords into a 64-byte buffer, causing a kernel page fault. The IB only needs to be a minimal NOP shell to schedule the job; the cleaner shader itself is emitted on the ring via emit_cleaner_shader(). Fill 16 dwords to match the allocation. v2: Use ib_size_dw variable (Lijo) (cherry picked from commit bf21af331ebf72d0935fd70c73192414a422c03a)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix reversed error cleanup order in ucopy functions nouveau_uvmm_vm_bind_ucopCVE-2026-68271 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: fix reversed error cleanup order in ucopy functions nouveau_uvmm_vm_bind_ucopy() and nouveau_exec_ucopy() place their error cleanup labels in allocation order rather than reverse allocation order. On a u_memcpya() failure for in_sync.s, the goto to err_free_ops (or err_free_pushs) frees the first allocation and then falls through to err_free_ins, which calls u_free() on args->in_sync.s. Since args->in_sync.s still holds the ERR_PTR returned by the failed u_memcpya(), and ERR_PTR values are not caught by ZERO_OR_NULL_PTR(), kvfree() proceeds to dereference it, which can result in a kernel oops. A failure for out_sync.s instead jumps to err_free_ins and skips freeing the first allocation, leading to a memory leak. Fix by swapping the cleanup label order so resources are freed in the correct reverse allocation sequence.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: media: cx23885: add ioremap return check and cleanup Add a check for the return value of pCVE-2026-68226 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: media: cx23885: add ioremap return check and cleanup Add a check for the return value of pci_ioremap_bar() in cx23885_dev_setup(). If ioremap for BAR0 fails, release the already allocated PCI memory region, decrement the device count, and return -ENODEV. This prevents a potential null pointer dereference and ensures proper cleanup on memory mapping failure.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Add missing v4l2_subdev_cleanup() in crossbar and pipe Both mxc_isi_CVE-2026-68220 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: media: nxp: imx8-isi: Add missing v4l2_subdev_cleanup() in crossbar and pipe Both mxc_isi_crossbar_init() and mxc_isi_pipe_init() call v4l2_subdev_init_finalize() which allocates the subdev active state, but neither mxc_isi_crossbar_cleanup() nor mxc_isi_pipe_cleanup() calls v4l2_subdev_cleanup() to free it. This causes a memory leak on every rmmod, reported by kmemleak: unreferenced object 0xffff0000d06fc800 (size 192): comm "(udev-worker)", pid 254, jiffies 4294913455 backtrace (crc 36eeae58): kmemleak_alloc+0x34/0x40 __kvmalloc_node_noprof+0x5f8/0x7d8 __v4l2_subdev_state_alloc+0x1fc/0x30c __v4l2_subdev_init_finalize+0x178/0x368 Add the missing v4l2_subdev_cleanup() calls before media_entity_cleanup() in both crossbar and pipe cleanup paths.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix cleanup bugs in vivid_init() When platform_device_register() fails in viCVE-2026-68203 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix cleanup bugs in vivid_init() When platform_device_register() fails in vivid_init(), the embedded struct device in vivid_pdev has already been initialized by device_initialize(), but the failure path jumps to free_output_strings without dropping the device reference for the current platform device: vivid_init() -> platform_device_register(&vivid_pdev) -> device_initialize(&vivid_pdev.dev) -> setup_pdev_dma_masks(&vivid_pdev) -> platform_device_add(&vivid_pdev) This leads to a reference leak when platform_device_register() fails. Fix this by calling platform_device_put() before jumping to the common cleanup path. Also, the unreg_driver label incorrectly calls platform_driver_register() instead of platform_driver_unregister(), which breaks cleanup when workqueue creation fails after successful driver registration. Fix that as well. The reference leak was identified by a static analysis tool I developed and confirmed by manual review. The incorrect cleanup call was found during code inspection.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: mei: bus: access mei_device under device_lock on cleanup Fix couple of problems in mei_cl_CVE-2026-68181 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mei: bus: access mei_device under device_lock on cleanup Fix couple of problems in mei_cl_bus_dev_release(): mei_cl_flush_queues() is running without lock. bus->file_list access after mei_dev_bus_put(bus) can become a use-after-free if this was the last reference to bus. Protect queues cleanup and WARN traversal by device lock there to avoid the concurrent access problems. Move WARN traversal before mei_dev_bus_put(bus). This file uses bus variable name for mei_device, adjust code of mei_cl_bus_dev_release() to use bus variable too.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 6, 2026Unauthenticated Cross Site Request Forgery (CSRF) in Plugins Garbage Collector (Database Cleanup) <= 0.14 versions.CVE-2026-66686 · WordPress plugins & themes · reported by PatchstackMedium 6.5

  Unauthenticated Cross Site Request Forgery (CSRF) in Plugins Garbage Collector (Database Cleanup) <= 0.14 versions.

  Affected

  up to 0.14

  What to do

  Affects up to 0.14. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordpatchstack.com

• Aug 6, 2026In the Linux kernel, the following vulnerability has been resolved: crypto: amlogic - avoid double cleanup in meson_crypto_probe() When meson_allocate_chanlisCVE-2026-64599 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: crypto: amlogic - avoid double cleanup in meson_crypto_probe() When meson_allocate_chanlist() fails after a partial allocation, it already unwinds the allocated chanlist state through its local error path. meson_crypto_probe() then jump to error_flow and calls meson_free_chanlist() again, causing the same per-flow resources to be torn down twice. In the reproduced failure path, the second teardown re-entered crypto_engine_exit() on an already destroyed worker and KASAN reported a slab-use-after-free in kthread_destroy_worker(). Prevent double-free by handling partial allocation failures locally within meson_allocate_chanlist() and skipping the outer cleanup path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. The bug was reproduced in a QEMU x86_64 guest booted with KASAN on v7.1, using the reproducer under tools/testing/meson_crypto_probe. The reproducer forces the second dma_alloc_attrs() call in the gxl-crypto probe path to return NULL, making meso

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 5, 2026Link following vulnerability in the Uninstaller component in CCleaner prior to 7.10.1464 on Windows allows a local, low-privileged attacker to escalate privilegCVE-2026-12410 · Other software · Gen Digital · reported by security@nortonlifelock.comHigh 7.8

  Link following vulnerability in the Uninstaller component in CCleaner prior to 7.10.1464 on Windows allows a local, low-privileged attacker to escalate privileges to SYSTEM via a symlink/junction created during application uninstallation, which CCleaner follows when deleting the application's data folder with elevated integrity.

  Product

  CCleaner

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgendigital.com

• Aug 5, 2026Leantime through 3.6.2 exposes the JSON-RPC methods leantime.rpc.TwoFA.TwoFA.getSetupData, saveSecret, verifyAndEnable, and disable2FA, which act on a caller-suCVE-2026-54418 · Other software · Leantime · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cHigh 8.1

  Leantime through 3.6.2 exposes the JSON-RPC methods leantime.rpc.TwoFA.TwoFA.getSetupData, saveSecret, verifyAndEnable, and disable2FA, which act on a caller-supplied userId parameter with no ownership check, session pinning, or permission-attribute gate (unlike other RPC-exposed methods in the same dispatcher).

  Product

  Leantime

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.com

• Aug 1, 2026FreeRDP before 3.29.0 contains a null pointer dereference vulnerability in smartcard device control request cleanup when reader-state decoding fails.CVE-2026-67304 · Other software · FreeRDP · reported by VulnCheckHigh 8.7

  FreeRDP before 3.29.0 contains a null pointer dereference vulnerability in smartcard device control request cleanup when reader-state decoding fails. Attackers can send malformed smartcard IRP requests with non-zero cReaders and truncated reader-state data to crash the process via null pointer access in free_reader_states functions.

  Product

  FreeRDP

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Jul 31, 2026LightFTP 2.3.1 contains a residual race condition vulnerability (an incomplete fix for CVE-2024-11144) in the worker_thread_cleanup() function of ftpserv.c thatCVE-2026-67607 · Other software · hfiref0x · reported by VulnCheckHigh 8.2

  LightFTP 2.3.1 contains a residual race condition vulnerability (an incomplete fix for CVE-2024-11144) in the worker_thread_cleanup() function of ftpserv.c that allows remote unauthenticated attackers to destabilize or crash the daemon by triggering unsynchronized access to shared per-connection state without holding the required mutex lock. Attackers can send a data-transfer command such as LIST followed immediately by ABOR to exploit the missing synchronization on shared context and detached thread id reuse, resulting in daemon destabilization or crash which can lead to a denial of service. The 2.3.1 patch only narrowed the timing window (an extra re-check and reordered cleanup), it never added the missing lock, so the underlying race remains.

  Product

  LightFTP

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Jul 30, 2026The MMS BER decoder contains a flaw in decoding fixed-width BER fields (boolean/integer): an attacker-supplied length value is not validated, causing a read pCVE-2026-65421 · Other software · MZ Automation GmbH · reported by ics-cert@hq.dhs.govHigh 7.1

  The MMS BER decoder contains a flaw in decoding fixed-width BER fields (boolean/integer): an attacker-supplied length value is not validated, causing a read past the end of a heap buffer. This leads to termination of the MMS service process and a denial-of-service condition.

  Product

  libiec61850

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comcisa.gov

• Jul 30, 2026Leantime 3.6.2 contains a cross-site request forgery vulnerability that allows unauthenticated attackers to perform state-changing actions on behalf of authentiCVE-2026-66416 · Other software · Leantime · reported by VulnCheckHigh 8.6

  Leantime 3.6.2 contains a cross-site request forgery vulnerability that allows unauthenticated attackers to perform state-changing actions on behalf of authenticated users by excluding the Laravel VerifyCsrfToken middleware from the global middleware stack in app/Http/Kernel.php. Attackers can craft malicious pages delivered via phishing emails or malicious websites to trigger unauthorized POST, PUT, and DELETE requests that create or delete projects, modify settings, and change permissions as any authenticated user.

  Product

  Leantime

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Jul 30, 2026Leantime 3.6.2 contains a server-side request forgery and local file inclusion vulnerability that allows authenticated attackers to read internal resources by pCVE-2026-66415 · Other software · Leantime · reported by VulnCheckHigh 8.4

  Leantime 3.6.2 contains a server-side request forgery and local file inclusion vulnerability that allows authenticated attackers to read internal resources by passing unsanitized user-supplied filenames to file_get_contents() in the Blueprints::import() method without path validation. Attackers can submit crafted filenames containing URL wrappers or path traversal sequences through the JSON-RPC API endpoint to access cloud metadata services or read arbitrary files from the server filesystem.

  Product

  Leantime

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Jul 30, 2026Leantime 3.6.2 contains an open redirect vulnerability in the Login controller that allows unauthenticated attackers to redirect authenticated users to arbitrarCVE-2026-66414 · Other software · Leantime · reported by VulnCheckMedium 5.1

  Leantime 3.6.2 contains an open redirect vulnerability in the Login controller that allows unauthenticated attackers to redirect authenticated users to arbitrary external sites by manipulating the redirectUrl POST parameter. Attackers can craft a malicious login URL with a tampered redirectUrl value that bypasses FILTER_SANITIZE_URL validation to redirect victims to attacker-controlled sites for phishing or credential theft.

  Product

  Leantime

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Jul 28, 2026Media Cleaner: Clean your WordPress!: Server-Side Request ForgeryCVE-2026-4912 · WordPress plugins & themes · reported by WordfenceMedium 4.1

  The Media Cleaner: Clean your WordPress! plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 7.0.3. This is due to the `get_urls_from_html()` function using `DOMDocument::loadHTMLFile()` to fetch iframe source URLs with an insufficient hostname validation check that relies on a substring match against the site's server name. This makes it possible for authenticated attackers, with Administrator-level access and above, to make web requests to arbitrary locations originating from the web application, which can be used to query and interact with internal services.

  Product

  Media Cleaner: Clean your WordPress!

  Affected

  up to 7.0.3

  What to do

  Affects up to 7.0.3. Update Media Cleaner: Clean your WordPress! to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org

• Jul 27, 2026Unauthenticated Cross Site Scripting (XSS) in Anti Spam and list cleaner &#8211; AcyChecker <= 1.8.1 versions.CVE-2026-65448 · WordPress plugins & themes · reported by PatchstackMedium 6.5

  Unauthenticated Cross Site Scripting (XSS) in Anti Spam and list cleaner &#8211; AcyChecker <= 1.8.1 versions.

  Affected

  up to 1.8.1

  What to do

  Affects up to 1.8.1. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordpatchstack.com

• Jul 27, 2026Unauthenticated Cross Site Scripting (XSS) in Spam protection, AntiSpam, FireWall by CleanTalk <= 6.82 versions.CVE-2026-65437 · WordPress plugins & themes · reported by PatchstackHigh 7.1

  Unauthenticated Cross Site Scripting (XSS) in Spam protection, AntiSpam, FireWall by CleanTalk <= 6.82 versions.

  Affected

  up to 6.82

  What to do

  Affects up to 6.82. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordpatchstack.com

• Jul 27, 2026Leantime 3.6.2 and prior contains a broken access control vulnerability that allows authenticated users to read milestone data from projects they are not assignCVE-2026-66412 · Other software · Leantime · reported by VulnCheckHigh 7.1

  Leantime 3.6.2 and prior contains a broken access control vulnerability that allows authenticated users to read milestone data from projects they are not assigned to by supplying arbitrary integer milestone IDs to the tickets.getMilestone JSON-RPC endpoint. Attackers can enumerate integer milestone IDs through the JSON-RPC API to access project planning information, milestone titles, descriptions, and timelines across all projects on the instance regardless of project membership.

  Product

  Leantime

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup If acpi_nfit_init() fails after addinCVE-2026-64510 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup If acpi_nfit_init() fails after adding the acpi_desc object to the acpi_descs list, that object is never removed from that list because the acpi_nfit_shutdown() devm action is not added for the NFIT device in that case. Next, the acpi_nfit_init() failure causes acpi_nfit_probe() to fail, the acpi_desc object is freed, and a dangling pointer is left behind in the acpi_descs. Any subsequent ACPI Machine Check Exception will trigger nfit_handle_mce() which iterates over acpi_descs and so a use-after-free will occur. Moreover, if acpi_nfit_probe() returns 0 after installing a notify handler for the NFIT device and without allocating the acpi_desc object and setting the NFIT device's driver data pointer, the acpi_desc object will be allocated by acpi_nfit_update_notify() and acpi_nfit_init() will be called to initialize it. Regardless of whether or not acpi_nfit_init() fails in that case, the acpi_nfit_shutdown() devm action is not added for the NFIT device and acpi_desc is never removed from the acpi_descs list. If the acpi_desc object is freed subsequently on

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: rust: block: fix GenDisk cleanup paths GenDiskBuilder::build() still has fallible work aftCVE-2026-64509 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: rust: block: fix GenDisk cleanup paths GenDiskBuilder::build() still has fallible work after __blk_mq_alloc_disk(), but its error path only recovers the foreign queue data. That leaks the temporary gendisk and request_queue until later teardown. If the caller moved the last Arc<TagSet<T>> into build(), the leaked queue can retain blk-mq state after the tag set is dropped. Fix the pre-registration failure path by dropping the temporary gendisk reference with put_disk() before recovering queue_data, so disk_release() can tear down the owned queue. Also pair GenDisk::drop() with put_disk() after del_gendisk(). Once a Rust GenDisk has been added with device_add_disk(), del_gendisk() only unregisters it; the final gendisk reference still has to be dropped to complete the release path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: iio: chemical: scd30: Cleanup initializations and fix sign-extension bug Include linux/bitCVE-2026-64497 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: iio: chemical: scd30: Cleanup initializations and fix sign-extension bug Include linux/bitfield.h for FIELD_GET(). Create new macros for bit manipulation in combination with manual bit manipulation being replaced with FIELD_GET(). The current variable declaration and initializations are barely readable and use comma separations across multiple lines. Refactor the initializations so that mantissa and exp have separate declarations and sign gets initialized later. In addition (and due to the nature of the cleanup), fix a sign-extension bug where, float32 would get bitwise anded with ~BIT(31) (which is 0xFFFFFFFF7FFFFFFF) which corrupted the exponent.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: rust_binder: use a u64 stride when cleaning up the offsets array Allocation's Drop walks tCVE-2026-64467 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: rust_binder: use a u64 stride when cleaning up the offsets array Allocation's Drop walks the offsets array (binder_size_t = u64 entries), cleaning up the objects, but it used usize instead of u64 for both the stride and the per-entry read. On 64-bit kernels (usize == u64) this is harmless, but on 32-bit kernels it walks the 8-byte entries in 4-byte steps, iterating an N-entry array 2N times, and reads the always-zero high word as offset 0, cleaning up the object at offset 0 N extra times. As a result the referenced node or handle ends up with a lower reference count than it actually has (a refcount over-decrement), and binder's reference accounting is corrupted; for example, the owner can be notified of a strong reference release (BR_RELEASE) even though references still remain. Change the stride to u64, and read each entry as a u64, narrowing it to usize with try_into(). On 32-bit ARM, when this over-decrement would drive a count below zero, the driver's existing refcount guard refuses it and fires: rust_binder: Failure: refcount underflow!

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers Syzbot reported a huCVE-2026-64359 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers Syzbot reported a hung task in nilfs_transaction_begin() where multiple tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds waiting to acquire ns_segctor_sem for read: INFO: task syz.0.17:5918 blocked for more than 143 seconds. Call Trace: schedule+0x164/0x360 rwsem_down_read_slowpath+0x6d9/0x940 down_read+0x99/0x2e0 nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221 nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921 notify_change+0xc1a/0xf40 chmod_common+0x273/0x4a0 do_fchmodat+0x12d/0x230 The writer holding ns_segctor_sem was a concurrent NILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emitting per-element warnings from nilfs_sufile_updatev(): __nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78 nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186 nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline] nilfs_free_segments fs/nilfs2/segment.c:1140 [inline] nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline] nilfs_segctor_do_construct+0x1f55/0x76c0 nilfs_

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 23, 2026Joomla Extension - regularlabs.com - CDN Credential leakage Cache Cleaner Pro extension - CDN credentials were exposed in administrator request URLs.CVE-2026-64874 · Websites & servers · reported by security@joomla.orgCritical 9.8

  Joomla Extension - regularlabs.com - CDN Credential leakage Cache Cleaner Pro extension - CDN credentials were exposed in administrator request URLs.

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordregularlabs.com

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.