Vulnerability database

25,335 results · page 49 of 507

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL deref in dpll_device_ops() during teardown race When the last owner of a dpCVE-2026-90144 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL deref in dpll_device_ops() during teardown race When the last owner of a dpll device unregisters while a foreign driver still holds a pin on it via dpll_pin_on_pin_register(), the dpll object stays alive with an empty registration list. A pin notification queued before the unregister (e.g. ice reacting to zl3073x_i2c removal) then walks pin->dpll_refs into dpll_device_ops(), which trips the WARN_ON and dereferences the missing registration. dpll_lock cannot help because the notification work was queued before the unregistering driver took the lock. Treat the empty registration list as a legitimate transient state. Make dpll_priv() and dpll_device_ops() return NULL in that case and make every pin netlink path that resolves a device from a pin skip such dplls. dpll_cmd_pin_get_one() picks a ref with a live registration and returns -ENODEV when there is none, the pin dumpit skips such a pin instead of aborting the dump, dpll_msg_add_pin_dplls() and the frequency, esync, reference sync and phase adjust set paths skip dead refs, and dpll_pin_parent_device_set() validates the parent with dpll_device_get

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net: kcm: Hold RCU read lock while running BPF parser kcm_parse_func_strparser() calls bpfCVE-2026-90143 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net: kcm: Hold RCU read lock while running BPF parser kcm_parse_func_strparser() calls bpf_prog_run_pin_on_cpu() which prevents CPU migration, but does not establish an RCU read-side critical section. Consequently, BPF map operations can trigger WARN_ON_ONCE(!bpf_rcu_lock_held()) when called from the KCM strparser program. Hold the RCU read lock while running the program.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix resize of the RX ring When a AF_XDP socket is attached, the virtnet_rx_resCVE-2026-90142 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: virtio_net: Fix resize of the RX ring When a AF_XDP socket is attached, the virtnet_rx_resize should resize the rq->xsk_buffs XSK buffer array. Otherwise, when the size grows, the virtnet_rx_resume() causes a write past the end of the array. This is easily reproducable with ethtool -G ens3 rx 32 ./xdpsock -i eth0 -q 0 -r -z & ethtool -G eth0 rx 256

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ipvs: fix integer overflow in ftp helper port/address parsing ip_vs_ftp_get_addrport() accCVE-2026-90141 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.3

  In the Linux kernel, the following vulnerability has been resolved: ipvs: fix integer overflow in ftp helper port/address parsing ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16 (hport) and into unsigned char (p[]) without checking for overflow. A crafted FTP PASV/EPSV response with an over-long port or address octet wraps the value, so the helper configures the data connection with a truncated port/address. The netfilter conntrack FTP helper had the same defect, fixed in commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16 overflows"). Apply the equivalent fix here: widen the port accumulator to u32 and reject values above 65535, and reject address octets above 255.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: cuse: wait for pending RCU callbacks on module exit Since commit 053fc4f755ad ("fuse: fix CVE-2026-90140 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: cuse: wait for pending RCU callbacks on module exit Since commit 053fc4f755ad ("fuse: fix UAF in rcu pathwalks"), fuse_conn_put() frees the fuse_conn through call_rcu() rather than synchronously. For cuse, fc->release is cuse_fc_release(), which lives in the cuse module. If the module is removed before the RCU grace period ends, the callback jumps into freed module memory: userspace / module unload | RCU softirq ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ close(/dev/cuse) | cuse_channel_release() | fuse_dev_release() | fuse_conn_put(fch->conn) | call_rcu(delayed_release) ------+---> callback queued | rmmod cuse | cuse_exit() | cuse_channel_destroy() | ... | return | | <module text freed> | | rcu_do_batch() |

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL whCVE-2026-90139 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL when its inode allocation fails, but fuse_fill_super_submount() passed the result straight to get_fuse_inode() and decremented fi->nlookup without checking it: root = fuse_iget(sb, parent_fi->nodeid, ...); fi = get_fuse_inode(root); fi->nlookup--; Inside fuse_iget() the inode allocation can fail and return NULL. The submount root takes the iget5_locked() path, whose alloc_inode() can fail under memory pressure (the auto-submount branch can fail the same way in new_inode() or fuse_alloc_submount_lookup()): inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set, &nodeid); if (!inode) return NULL; A NULL root makes get_fuse_inode() a container_of() on NULL and the nlookup decrement a write to a bogus address, oopsing the mount. With CONFIG_KASAN the following null pointer dereference is reported when the root inode allocation of an auto-submount fails (e.g. under memory pressure): ===================================================

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which CVE-2026-90138 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix password encoding bounds check The password PSWD_ENCODINGS pCVE-2026-90137 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.7

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix password encoding bounds check The password PSWD_ENCODINGS parser reads password_obj[elem + pos_values] while copying the supported password encodings from the ACPI package. The outer loop only guarantees that elem is within password_obj_count. The encoding count is bounded by MAX_ENCODINGS_SIZE, but that does not guarantee that the ACPI package contains enough entries for all elem + pos_values accesses. A malformed package can therefore declare a non-zero encoding count without providing enough string objects, causing the parser to read past the ACPI package array and pass an out-of-bounds string pointer and length to hp_convert_hexstr_to_str(). Add the same computed-index bounds check used by the other offset-based package parsing loops before reading password_obj[elem + pos_values].

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Reject negative power cap writes in hwmon hsmp_hwmon_write() takes CVE-2026-90136 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/hsmp: Reject negative power cap writes in hwmon hsmp_hwmon_write() takes the user-supplied hwmon value as a signed long and assigns "val / MICROWATT_PER_MILLIWATT" to msg.args[0], which is a __u32. MICROWATT_PER_MILLIWATT is an unsigned long, so a negative write to power1_cap (e.g. "echo -1 > power1_cap") is first converted to a huge unsigned value by the division and then stored into the u32 argument. As a result a nonsensical, multi-gigawatt socket power limit is sent to the SMU via HSMP_SET_SOCKET_POWER_LIMIT instead of the write being rejected. Reject negative values with -EINVAL before the conversion. Tested with HSMP enabled: CAP=$(dirname $(grep -l amd_hsmp_hwmon \ /sys/class/hwmon/hwmon*/name | head -1))/power1_cap # negative write echo -1000000 > $CAP ; echo "ret=$?" # valid positive write must still work echo 400000000 > $CAP ; echo "ret=$?" Before: # echo -1000000 > $CAP ; echo "ret=$?" ret=0 <- accepted; bogus limit sent to SMU # echo 400000000 > $CAP ; echo "ret=$?" ret=0 After: # echo -1000000 > $CAP ; echo "ret=$?" b

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trCVE-2026-90135 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs() sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/* causes use-afer-free crash when either alloc_percpu() or dev_addr_init() in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device refcount tracker infrastructure") added ref_tracker_dir_exit() to only free_netdev() path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs: fix kmap_local_page() usage in compress Several compressed I/O paths discard the addCVE-2026-90134 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ntfs: fix kmap_local_page() usage in compress Several compressed I/O paths discard the address returned by kmap_local_page() and later access or unmap the page using page_address(). This is invalid for highmem pages, and local mappings must also be unmapped using the address returned by kmap_local_page(). Map each destination page in ntfs_decompress() only while producing the current sub-block. Use memcpy_from_page(), memcpy_to_page(), and memzero_page() for the other page accesses. Remove unnecessary local mappings from ntfs_write_cb(), where pages are accessed through the vmap() mapping.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs: Fix index_root heap OOB write in ntfs_ir_to_ib() ntfs_ir_to_ib copies all entries frCVE-2026-90133 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ntfs: Fix index_root heap OOB write in ntfs_ir_to_ib() ntfs_ir_to_ib copies all entries from index_root into a freshly allocated index_block_size-byte buffer without verifying that the entries fit in the available space. The entries in index_root may be larger than the usable entry space in the index block. This can cause OOB writes past the end of the allocation. The validator ntfs_index_root_inconsistent() checks that entries are self-consistent within the IR value, but never cross-checks them against index_block_size. There is no bounds check in ntfs_ir_to_ib() before the memcpy. Fixing this at the sink in ntfs_ir_to_ib() since ntfs_index_root_inconsistent() validates the logical consistency of index_root as a structure and a root with large entries is a structurally valid root. The bug is a size conflict of ntfs_ir_to_ib(). Also, the validator is called once per inode load in ntfs_read_locked_inode() while ntfs_ir_to_ib() is only called during a reparent, a check there adds no overhead to the common path. Moreover, even a future call path that bypasses the validator would still be protected. With NULL as

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs: reject unprivileged writes to reserved $LX* xattrs Reject setxattr of the reserved $CVE-2026-90132 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: ntfs: reject unprivileged writes to reserved $LX* xattrs Reject setxattr of the reserved $LXUID, $LXGID, $LXMOD and $LXDEV names from userspace unless the caller has CAP_SYS_ADMIN.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs: serialize resident iomap reads with mrec_lock ntfs_read_iomap_begin_resident() walksCVE-2026-90131 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: ntfs: serialize resident iomap reads with mrec_lock ntfs_read_iomap_begin_resident() walks the MFT record through ntfs_attr_lookup() -> ntfs_attr_find() without taking ni->mrec_lock, while ntfs_attr_record_resize(), ntfs_make_room_for_attr() and ntfs_resident_attr_record_add() memmove() the same base_ni->mrec buffer under that lock. map_mft_record() only takes a reference and does not serialize, so the reader can observe torn attribute length and offset fields while a writer is relocating the records. KCSAN reports the race between the mmap read fault path and both link() and unlink(): BUG: KCSAN: data-race in ntfs_attr_find / ntfs_attr_record_resize write to 0xffff888100af1018 of 4 bytes by task 96 on cpu 1: ntfs_attr_record_resize+0xd2/0x130 ntfs_attr_record_rm+0xad/0x530 ntfs_delete+0x224/0x640 ntfs_unlink+0x14d/0x280 vfs_unlink+0x157/0x520 read to 0xffff888100af1018 of 4 bytes by task 95 on cpu 0: ntfs_attr_find+0x104/0x5b0 ntfs_attr_lookup+0x39c/0x10c0 ntfs_read_iomap_begin_resident+0xc6/0x230 ntfs_read_iomap_begin+0x5d/0xa0 iomap_iter+0x2e2/0x6e0 iomap_read_folio+0

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix cleanup after worker creation failure vdpasim_create() leaves vdpasim->workeCVE-2026-90130 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: vdpa_sim: fix cleanup after worker creation failure vdpasim_create() leaves vdpasim->worker as an ERR_PTR when kthread_run_worker() fails. The error path then drops the device reference, which releases the partially initialized simulator. vdpasim_free() unconditionally passes the worker pointer to kthread_destroy_worker(), so the ERR_PTR is dereferenced and can trigger a general protection fault. Store the worker error, clear the pointer, and only clean up the worker when it was successfully initialized. Also make the release path tolerate partially initialized objects by guarding virtqueue and IOTLB cleanup, since the same release path can be reached from other initialization failures. I found this bug myself, though the patch was written with AI assistance.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: virtio_balloon: quiesce balloon work before device shutdown Commit 8bd2fa086a04 ("virtio: CVE-2026-90129 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: virtio_balloon: quiesce balloon work before device shutdown Commit 8bd2fa086a04 ("virtio: break and reset virtio devices on device_shutdown()") added a generic virtio bus .shutdown handler that breaks and resets every virtio device during device_shutdown(), i.e. on reboot and kexec. virtio_balloon provides no .shutdown of its own, so that generic path runs while the balloon's asynchronous work is still armed. Once the device has been broken, virtqueue_add_inbuf() in virtballoon_free_page_report() returns -EIO and trips its WARN_ON_ONCE(). On a kernel booted with panic_on_warn that turns an ordinary reboot, for example a kexec based upgrade, into a fatal panic in the middle of device_shutdown(), so the machine never reaches the new kernel. Relaxing that single WARN_ON_ONCE() would only hide the symptom: the inflate/deflate and OOM paths do not warn, they call wait_event(vb->acked, ...) and would instead block forever on a broken queue that can no longer complete. The device has to be quiesced, not just kept quiet. Add a .shutdown handler that quiesces the balloon via the shared virtballoon_quiesce() helper whil

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: fix wrong list iterated in add_direct_chain error path In add_direct_chain(), nCVE-2026-90128 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: vdpa/mlx5: fix wrong list iterated in add_direct_chain error path In add_direct_chain(), newly allocated direct MR entries are added to the local list 'tmp', which is spliced into mr->head only on success. On the error path, the cleanup loop was incorrectly iterating over mr->head instead of tmp. Fix by iterating over 'tmp' in the err_alloc cleanup path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: virtio: rtc: time out alarm requests RTC class operations run with rtc_device.ops_lock helCVE-2026-90127 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: virtio: rtc: time out alarm requests RTC class operations run with rtc_device.ops_lock held. The virtio RTC alarm requests currently wait without a timeout for the device to return their requestq buffers. On surprise removal, virtio-pci marks the virtqueues broken before unregistering the virtio device. If an alarm request is waiting when the device stops responding, viortc_remove() blocks in viortc_class_stop() while trying to acquire ops_lock. The request cannot complete and device removal hangs until the waiting task is signalled. Use the same 60-second timeout as clock read requests for alarm reads, alarm programming, and alarm interrupt enable requests. The existing message reference counting keeps a timed-out request alive until a late response or device teardown.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers thCVE-2026-90126 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers the CLKOUT clock provider with of_clk_add_provider(), but nothing ever unwinds it: there is no of_clk_del_provider() call and the driver has no remove callback. Each of_clk_add_provider() allocates a struct of_clk_provider, takes a reference on the OF node and adds an entry to the global of_clk_providers list, none of which is released when the device is unbound. Every bind/unbind (or module reload) therefore leaks a provider structure and an of_node reference. The clock itself is already device-managed (devm_clk_register()); only the provider registration was not. Use devm_of_clk_add_hw_provider() so the provider is removed automatically on unbind. Tie it to the parent i2c device, whose OF node carries the #clock-cells and clock-output-names properties (the RTC class device has no OF node of its own).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix request buffer leak in smb2_new_read_req() smb2_new_read_req() allocates CVE-2026-90125 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: smb: client: fix request buffer leak in smb2_new_read_req() smb2_new_read_req() allocates the request buffer with smb2_plain_req_init() but only publishes it to the caller with *buf = req at the very end of the function. Two error returns sit in between: rc = smb2_plain_req_init(SMB2_READ, io_parms->tcon, server, (void **) &req, total_len); if (rc) return rc; if (server == NULL) return -ECONNABORTED; [...] rdata->mr = smbd_register_mr(server->smbd_conn, &rdata->subreq.io_iter, true, need_invalidate); if (!rdata->mr) return -EAGAIN; On either of them the buffer is neither released nor handed back, so it is leaked. The caller cannot clean up after it: smb2_async_readv() does 'goto out' on a non-zero return, which skips the cifs_small_buf_release(buf) at async_readv_out, and buf has not been assigned at that point in any case. The write path has never had this problem. smb2_async_writev() registers the memory region inline and jumps to its release label instead of returning: wdata->mr = smbd_register_mr(...); if (!wdata->mr) { rc = -EAGAIN; goto async_writev_out; }

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-rzg2l: Fix loss of interrupt rzg2l_clear_irq_int() and rzg2l_clear_tint_inCVE-2026-90124 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-rzg2l: Fix loss of interrupt rzg2l_clear_irq_int() and rzg2l_clear_tint_int() perform a read-modify-write on the ISCR/TSCR status registers to clear the bit for the interrupt just handled. Since these registers are write-0-to-clear per bit, this is racy: If another interrupt's status bit gets set between the read and the write, that bit is written back as 0 by the software-constructed value, clearing an interrupt that hasn't been serviced yet and losing it. This can be reproduced by triggering multiple interrupts at once, e.g.: gpioset -c gpiochip0 355=0 353=0 328=0 352=0 Fix this by writing back only the bit being cleared, with all other bits set to 1, instead of read-modify-writing the whole register. Since 1-bits are left unchanged by hardware, concurrently-set status bits for other interrupts are preserved.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: irqchip/ast2700-intc: Avoid allocating in the irq_domain activate() callback The interruptCVE-2026-90123 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: irqchip/ast2700-intc: Avoid allocating in the irq_domain activate() callback The interrupt core calls the irq_domain_activate() callback from __setup_irq() with desc->lock held and interrupts disabled. Both aspeed_intc1_irq_domain_activate() and aspeed_intc0_resolve_route() test a compatible string with fwnode_device_is_compatible(). fwnode_device_is_compatible() invokes fwnode_property_match_string(), which allocates with GFP_KERNEL. That's obviously not possible with interrupts disabled and a raw spinlock held. Both call sites are only ever handed OF nodes, so use of_device_is_compatible() instead: it walks the property in place and does not allocate.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: clk: visconti: Make sure clk_init_data is fully initialized The clk_init_data structure coCVE-2026-90122 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: clk: visconti: Make sure clk_init_data is fully initialized The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. visconti_clk_register_gate() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter in uninitialized, and thus may cause a crash. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Clear per-CPU IRS data on teardown IRS affinity setup publishes an IRS poiCVE-2026-90121 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Clear per-CPU IRS data on teardown IRS affinity setup publishes an IRS pointer and IAFFID state in the per-CPU data before the remaining IRS initialization can fail. The error path then frees the IRS data without clearing that published state, leaving CPUs associated with freed memory. On initialization failure and normal IRS teardown, clear the per-CPU IRS association by removing the stale pointer to irs_data. Also invalidate the per-CPU IAFFID state for any CPUs that were tied to the IRS before it was freed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Check get_logical_index() return value in MADT IAFFID parsing In gic_acpi_CVE-2026-90120 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Check get_logical_index() return value in MADT IAFFID parsing In gic_acpi_parse_iaffid() a given MADT GICC entry might not correspond to a logical cpu recognized by the kernel, resulting in the cpu variable initialization to an error value. Currently, the get_logical_index() return value is not checked for failure, which might result in out-of-bounds memory corruption while trying to index a per_cpu variable array. Add a check to evaluate get_logical_index() return value.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: ice1712: Fix the card leak at probe error with the auto-cleanup snd_ice1712_probe() CVE-2026-90119 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: ice1712: Fix the card leak at probe error with the auto-cleanup snd_ice1712_probe() performs multiple initialization steps after snd_card_new(), but directly returns on failures from later steps without releasing the ALSA card, causing resource leaks when probing fails. Use snd_devm_card_new() together with scope-based cleanup via __free(snd_card_unref), and clear the card pointer after successful registration to keep it alive.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs: fix off-by-one page overflow in ntfs_decompress() The per-token range check in ntfs_CVE-2026-90118 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ntfs: fix off-by-one page overflow in ntfs_decompress() The per-token range check in ntfs_decompress() uses if (cb >= cb_sb_end || dp_addr > dp_sb_end) break; so dp_addr == dp_sb_end falls through to the symbol copy `*dp_addr++ = *cb++`, writing one byte past the destination page. Since NTFS_SB_SIZE == PAGE_SIZE the destination is a single page, so the byte lands in the adjacent page, and *dest_ofs is left one past the sub-block end (the later `*dest_ofs &= ~PAGE_MASK` then yields 1, not 0, so the page is never finalized and later sub-blocks keep writing further past it). A corrupted compressed $DATA attribute thus produces a bounded run of out-of-bounds writes when the file is read. Break as soon as dp_addr reaches dp_sb_end; a full sub-block still completes, as its final copy advances dp_addr to exactly dp_sb_end.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs: validate usa_ofs before preserving the update sequence number When ntfs_mft_record_aCVE-2026-90117 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ntfs: validate usa_ofs before preserving the update sequence number When ntfs_mft_record_alloc() reuses a free mft record it reads the old update sequence number straight from the on-disk record: usn = *(__le16 *)((u8 *)m + le16_to_cpu(m->usa_ofs)); Here m points into the raw $MFT page-cache folio, which still holds unvalidated, MST-protected bytes: the folio is read by a plain iomap_read_folio() and neither post_read_mst_fixup() nor ntfs_mft_record_check() has run on it (both work on private copies). m->usa_ofs is therefore an untrusted u16, and a corrupted record can put it past the end of the record so the two-byte read lands outside the folio. Reading such a record while creating a file gives, under KASAN: BUG: KASAN: use-after-free in ntfs_mft_record_alloc+... Read of size 2 at addr ... ntfs_mft_record_alloc -> __ntfs_create -> ntfs_create -> path_openat Only preserve the old update sequence number when usa_ofs is even and in range, mirroring the check ntfs_mft_record_check() already applies; otherwise leave usn zero, which the existing restore below skips.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms cCVE-2026-90116 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: mtpav: shut down output timer before card teardown snd_mtpav_output_timer() rearms chip->timer while holding chip->spinlock and accesses the card-private mtpav state. snd_mtpav_free() currently takes the same lock and calls timer_delete() when the timer is active. This only removes a pending timer; it does not wait for a callback that is already running and does not prevent the callback from rearming the timer. A callback running on another CPU can therefore continue after snd_mtpav_free() releases the lock and access the card-private state while the card is being torn down. It can also rearm the timer after timer_delete() has returned. Call timer_shutdown_sync() without holding chip->spinlock. This waits for any running callback to finish and prevents further rearming before the card-private mtpav state is released.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: xsk: fix NULL pointer dereference in __xsk_rcv() In the __xsk_rcv() multi-buffer path, xskCVE-2026-90115 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: xsk: fix NULL pointer dereference in __xsk_rcv() In the __xsk_rcv() multi-buffer path, xsk_buff_alloc() is called in a loop without checking its return value. xsk_buff_can_alloc() only counts fill queue entries without validating their addresses, so it can succeed while xsk_buff_alloc() rejects all remaining entries and returns NULL. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:__xsk_rcv+0x426/0xc20 (net/xdp/xsk.c:350) Call Trace: xsk_generic_rcv+0x26d/0x5f0 xdp_do_generic_redirect+0x3c5/0xcf0 do_xdp_generic+0x92f/0xe70 __netif_receive_skb_core.constprop.0+0xf7e/0x2b30 Fix this with a two-stage transaction. First allocate and stage all buffers required for the packet, recycling all staged buffers with xsk_buff_free() if any allocation fails. Only after this stage succeeds, copy the data, reserve the RX descriptors, and release the buffers in an error-free loop.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net: bridge: Reject descending VLAN tunnel ranges A pair of descending VLAN and tunnel IDsCVE-2026-90114 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: bridge: Reject descending VLAN tunnel ranges A pair of descending VLAN and tunnel IDs can pass the tunnel range span check. The VLAN subtraction produces a negative int, which is converted to unsigned when compared with the u32 tunnel ID subtraction. It can therefore equal the wrapped tunnel ID delta. The range loop then performs no iterations. Since the batched notification handling added a post-loop error check, this leaves err uninitialized and makes the request's return value unpredictable. Reject descending VLAN ranges before comparing the spans. Valid ascending and single-entry ranges remain unchanged, while malformed descending ranges consistently return -EINVAL. This issue was found by a static analysis checker and confirmed by manual source review.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: netdevsim: update queue NAPI association on queue reset In netdevsim, receive queues (struCVE-2026-90113 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: netdevsim: update queue NAPI association on queue reset In netdevsim, receive queues (struct nsim_rq) embed their own struct napi_struct. When queue reset is performed (e.g. via queue_reset debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq, and nsim_queue_mem_free() later deletes and frees the old one. However, nsim_queue_start() failed to update the queue-to-NAPI mapping via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to point to the old NAPI struct. After the old queue was freed, a subsequent queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN slab-use-after-free read in nla_put_napi_id() when accessing rxq->napi->napi_id. Fix this by calling netif_queue_set_napi() in nsim_queue_start() to associate the new NAPI with the RX queue, and clear the association with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net: qlcnic: validate unified ROM sections before loading The unified ROM parser reads dirCVE-2026-90112 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: qlcnic: validate unified ROM sections before loading The unified ROM parser reads directory, product, and data-descriptor fields from the firmware file. Existing validation forms table and data ends with unchecked additions and multiplications. Malformed values can wrap before they are compared with the firmware size. The parser also dereferences typed pointers at firmware-controlled offsets. Valid descriptor extents alone are insufficient for the consumers. The loader reads a fixed-size bootloader regardless of its declared size, the version parser assumes a 17-byte tail, and a partial final firmware word is read as a full u64. A truncated image can therefore make the driver read beyond the firmware allocation during validation or loading. Replace the pointer-returning parser with bounded range helpers. Validate table entry sizes, descriptor indices, section ranges, the fixed bootloader load length, and the version tail before exposing any section. Read all file fields with unaligned little-endian accessors and assemble a partial final word from only the bytes that remain. Apply the same range chec

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ip6mr: do not clone dst in ip6mr_cache_report() IPv6 input attaches a non-refcounted (NORECVE-2026-90111 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ip6mr: do not clone dst in ip6mr_cache_report() IPv6 input attaches a non-refcounted (NOREF) dst to skbs under RCU. When an ingress multicast packet misses MFC lookup, ip6mr_cache_unresolved() places the skb onto the unresolved queue, escaping the receive-side RCU grace period. If the underlying route is deleted and freed, and the MFC queue is later resolved with a wrong parent interface, ip6_mr_forward() invokes ip6mr_cache_report(..., MRT6MSG_WRONGMIF), which executes dst_clone(skb_dst(pkt)) on the freed dst entry, triggering a slab use-after-free. Report packets queued to mroute6_sk (a raw socket) and netlink notifications do not require an attached dst entry. Fix this by: 1. Removing dst_clone() in ip6mr_cache_report() and ensuring report skbs do not hold a dst. 2. Dropping skb_dst before queuing unresolved skbs in ip6mr_cache_unresolved(), matching the fact that multicast forwarding resolves outgoing routes anew via ip6_route_output().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: inetpeer: randomize RB-tree node comparison using SipHash The inetpeer rate limiting systeCVE-2026-90110 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.4

  In the Linux kernel, the following vulnerability has been resolved: inetpeer: randomize RB-tree node comparison using SipHash The inetpeer rate limiting system stores peer entries in a Red-Black tree keyed deterministically on the remote IP address. Because tree lookups walk the RB-tree using standard lexicographical comparisons (inetpeer_addr_cmp), an off-path adversary can predict the exact topology of the tree and the sequence of nodes traversed during lookups (the gc_stack candidate list). By combining deterministic tree traversal with aggressive garbage collection (triggered when tree size exceeds inet_peer_threshold), an attacker can selectively force the eviction of targeted inet_peer nodes. When an evicted node is subsequently re-created upon receiving a new packet, its rate-limiting token bucket (rate_tokens, rate_last) is reset to full capacity. This creates a side-channel primitive allowing off-path attackers to bypass IP-keyed ICMP rate limits and infer open UDP ports (similar to SAD DNS style attacks). Mitigate this by randomizing the RB-tree node comparison logic using SipHash with a secret key (inetpeer_hash_key) initialized via net_get_random_once(). Nodes are o

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue gred_enqueue(), bfifo_CVE-2026-90109 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the current backlog plus the packet length fits within the queue limit: sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ) gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ) sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo) sch->qstats.backlog + skb->len <= q->limit (plug) sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len are unsigned int, so all sums are computed in 32 bits and wrap at 2^32. Once the true backlog exceeds 4 GiB the wrapped sum becomes small and admission keeps succeeding, so the queue grows without bound and the kernel can be driven to OOM. Promote the sums to u64 so admission stops once the true backlog exceeds the limit. The limit is u32, so the bounded queue stays below 2^32 and the stored u32 backlog never wraps. The bug can only be reproduced as root (albeit with ridiculous setup): attach a gred (or bfifo/plug) qdisc with a limit near 4 GiB, leaving the def

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net/smc: free stashed qentry before overwrite in REQ_ADD_LINK to ADD_LINK transition When CVE-2026-90108 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/smc: free stashed qentry before overwrite in REQ_ADD_LINK to ADD_LINK transition When smc_llc_event_handler() transitions the local LLC flow from SMC_LLC_FLOW_REQ_ADD_LINK to SMC_LLC_FLOW_ADD_LINK on arrival of an ADD_LINK request, it calls smc_llc_flow_qentry_set() unconditionally: if (lgr->llc_flow_lcl.type == SMC_LLC_FLOW_REQ_ADD_LINK) { lgr->llc_flow_lcl.type = SMC_LLC_FLOW_ADD_LINK; smc_llc_flow_qentry_set(&lgr->llc_flow_lcl, qentry); ... } A CONFIRM_LINK or ADD_LINK_CONT arriving while flow->type is SMC_LLC_FLOW_REQ_ADD_LINK is stashed into flow->qentry via the SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT handler (which stores into flow->qentry for any non-NONE flow type). When the subsequent ADD_LINK arrives, the REQ_ADD_LINK branch overwrites flow->qentry with the new pointer without first freeing the stashed allocation, leaking one kmalloc object. The stashed entry has no consumer: smc_llc_wait() is only called from llc_add_link_work, which is not yet scheduled while the flow type remains REQ_ADD_LINK. No waiter is sleeping on llc_msg_waiter at this point. It is safe to unconditionally f

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net/smc: free pending qentry in smc_llc_flow_stop() before memset smc_llc_flow_stop() reseCVE-2026-90107 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/smc: free pending qentry in smc_llc_flow_stop() before memset smc_llc_flow_stop() resets a flow struct with a blind memset: spin_lock_bh(&lgr->llc_flow_lock); memset(flow, 0, sizeof(*flow)); flow->type = SMC_LLC_FLOW_NONE; spin_unlock_bh(&lgr->llc_flow_lock); If flow->qentry is non-NULL at this point the pointer is overwritten without the allocation being freed, leaking one kmalloc object. A late-arriving duplicate CONFIRM_LINK or ADD_LINK_CONT message can set flow->qentry after the legitimate message has been consumed by the waiter via smc_llc_flow_qentry_clr() (which NULLs the pointer but leaves flow->type non-zero) but before the flow completes and smc_llc_flow_stop() runs. In that window the duplicate is stashed into flow->qentry, and then lost when smc_llc_flow_stop() zeros the struct. Call smc_llc_flow_qentry_del() inside the lock before the memset. smc_llc_flow_qentry_del() already checks flow->qentry before freeing, so the normal case where no entry is pending is a no-op.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net: bridge: arp/nd proxy: fix reading neigh ha Currently neigh ha address is read directlCVE-2026-90106 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: bridge: arp/nd proxy: fix reading neigh ha Currently neigh ha address is read directly, but that can result in torn/partial reads if the neigh is being updated. Use neigh_ha_snapshot to take a stable snapshot of the address.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: vxlan: fix reading neigh ha Currently arp/neigh_reduce read neigh ha directly which can leCVE-2026-90105 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: vxlan: fix reading neigh ha Currently arp/neigh_reduce read neigh ha directly which can lead to partial reads while the neigh is being updated. Use neigh_ha_snapshot to take a stable snapshot of the address similar to route_shortcircuit which already does the right thing.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: zero referring call lists before decoding decode_cb_sequence_args() allocates csaCVE-2026-90104 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: NFSv4.1: zero referring call lists before decoding decode_cb_sequence_args() allocates csa_rclists with kmalloc_objs(), so each referring_call_list starts uninitialized. decode_rc_list() assigns rcl_refcalls only when rcl_nrefcalls is nonzero. A valid list with zero referring calls therefore leaves the pointer uninitialized, and nfs4_callback_sequence() later passes stale slab contents to kfree(). Allocate csa_rclists with kzalloc_objs() so every rcl_refcalls member is NULL from the beginning, including valid empty referring call lists.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: NFSv4.2: fix LAYOUTSTATS send buffer exhaustion encode_layoutstats_maxsz budgets XDR_QUADLCVE-2026-90103 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: NFSv4.2: fix LAYOUTSTATS send buffer exhaustion encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE), i.e. 256 bytes, for the layoutupdate4 body written by the layout driver. The flexfiles record can exceed that. ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4, an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4 and the bool add a further 144, so the body passes 256 bytes before the netaddr4 is encoded at all. encode_layoutstats() additionally writes the deviceid4 and the layoutupdate4 lou_type word, neither of which the macro accounts for. The filehandle and the address are both chosen by the server, through LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the end of the send buffer. xdr_reserve_space() returns NULL once that happens, and the two ff_layout_encode_io_latency() calls run with dss_info->mirror->lock held, so a NULL return there leaves the lock permanently held. Raise PNFS_LAYOUTSTA

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: key the data server cache on the NFS version nfs4_pnfs_ds_add() keys the per-nCVE-2026-90102 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: NFSv4/pnfs: key the data server cache on the NFS version nfs4_pnfs_ds_add() keys the per-net data server cache on the multipath address set alone, and struct nfs4_pnfs_ds records no version. That suffices for the files layout driver, which always connects with version 4, but flexfiles takes its version tuple from GETDEVICEINFO per device, and one address can legitimately serve both NFSv3 and NFSv4. Two deviceids on one address with different ds_versions[0].version therefore share a single nfs4_pnfs_ds, and whichever mirror connects first pins ds_clp to its own version. The other one is handed that client anyway, so it selects rpc_call_ops for a version the connection does not speak, and the mismatched sequence-slot handling dereferences NULL. Add the version to the cache key so the two cannot alias, giving each version its own nfs4_pnfs_ds and connection while both mirrors stay usable. Only the major version is compared, since that is what selects rpc_call_ops and rpc_ops; v4.0 and v4.1 keep sharing a client. The files layout driver passes the 4 it already hardcodes at connect time.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix call to hardware monitoring event handler The first parameter of hwmon_notifyCVE-2026-90101 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix call to hardware monitoring event handler The first parameter of hwmon_notify_event() is supposed to be the hardware monitoring device. The bnxt driver calls it with the platform device as first parameter instead. This API break results in undefined behavior and may result in a crash. Pass the hardware monitoring device as parameter instead to fix the problem.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ptp: netc: fix period truncation and potential divide-by-zero in PEROUT The max_period bouCVE-2026-90100 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ptp: netc: fix period truncation and potential divide-by-zero in PEROUT The max_period bound in net_timer_enable_perout() was computed as: max_period = (u64)NETC_TMR_DEFAULT_FIPER + integral_period; which exceeds U32_MAX when integral_period > 0 (e.g. 0x100000002 for the default 333333333 Hz clock). A period_ns that passes this check but exceeds U32_MAX is then silently truncated when stored into the u32 struct netc_pp::period field. A truncated value of zero can reach netc_timer_set_perout_alarm(), where the local u32 period variable would also be 0, causing a divide-by-zero in roundup_u64(delta, period) whenever the stime < min_time branch is taken (which always happens for a start time of {0, 0}). Additionally, netc_timer_enable_periodic_pulse() and netc_timer_enable_fiper() both compute: fiper = pp->period - integral_period; A zero pp->period results in an unsigned wraparound to 0xFFFFFFFD, mis-programming the FIPER hardware register. Fix all three issues by capping max_period at NETC_TMR_DEFAULT_FIPER (0xFFFFFFFF). This ensures that any period_ns passing the range check fits in a u32 without trunc

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: account classifier filter allocations to memcg Allocations in the tc classifierCVE-2026-90099 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/sched: account classifier filter allocations to memcg Allocations in the tc classifier *_change() paths (filter objects, per-CPU counters, and per-filter aux data) use plain GFP_KERNEL without __GFP_ACCOUNT, allowing unprivileged users to pin kernel memory outside memcg charging. The shared tcf_exts_init_ex() action array allocation in cls_api.c was also uncharged; this patch closes it along with the per-classifier filter-object/percpu/aux allocations that remain unaccounted. Add GFP_KERNEL_ACCOUNT to: - the shared tcf_exts_init_ex() action array (cls_api.c), common to every filter of every classifier (32 pointers, 256 bytes); - the filter-object, per-CPU-counter, and per-filter aux allocations in cls_basic, cls_bpf, cls_cgroup, cls_flow, cls_flower, cls_fw, cls_matchall, cls_route and cls_u32; - the u32_init_knode() replace-path knode allocation (cls_u32.c), which allocates the same struct tc_u_knode + sel.keys on every replace of an existing knode and was missed by the create-path-only conversion. Also fix the cls_basic error path: basic_change() inserts fnew into the IDR before allocating the p

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net: sparx5: fix sleep in atomic context in MAC table access sparx5_set_rx_mode() runs witCVE-2026-90098 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: sparx5: fix sleep in atomic context in MAC table access sparx5_set_rx_mode() runs with netif_addr_lock_bh held and iterates dev->mc via __dev_mc_sync(), which per address calls sparx5_mc_sync() / sparx5_mc_unsync() -> sparx5_mact_learn() / sparx5_mact_forget(). These take sparx5->lock, a mutex, and then poll the MAC access command register with readx_poll_timeout(). A mutex may block, which is not allowed from atomic context. Convert the driver to the new .ndo_set_rx_mode_async callback introduced in commit 3554b4345d85 ("net: introduce ndo_set_rx_mode_async and netdev_rx_mode_work"). The async callback is invoked from process context, so the mutex and sleeping completion poll can remain. Observed with CONFIG_PROVE_LOCKING, CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 217, name: ip preempt_count: 201, expected: 0 Call trace: __might_resched+0x144/0x248 __might_sleep+0x48/0x7c __mutex_lock+0x74/0x850 mutex_lock_nes

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Skip VMBus module cleanup for non-nested root partition The VMBus moduCVE-2026-90097 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Skip VMBus module cleanup for non-nested root partition The VMBus module initialization function, hv_acpi_init(), currently does nothing when running in the root partition and root is not nested in another VM. But the initialization function reports success, so the VMBus module is indeed loaded. VMBus functionality is not actually needed, but the VMBus module must be loaded so that hv_vmbus_exists() can answer correctly. Furthermore, the mshv_root dependency on the VMBus module is needed as described in the commit message for 840b740a35bf ("mshv: Add conditional VMBus dependency"). Loading the VMBus module without actually initializing it causes failures if the module should later be unloaded. The module unload code tries to clean up things that were never initialized, resulting in memory faults and a panic. Fix this by having VMBus module exit function perform the same check for non-nested root partition, and do nothing in such a case, just like hv_acpi_init(). In the long run, the code that manages the Hyper-V provided SynIC should be refactored to better coordinate the requirements of ro

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: fuse: invalidate the correct range after O_APPEND direct write fuse_direct_write_iter() caCVE-2026-90096 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: fuse: invalidate the correct range after O_APPEND direct write fuse_direct_write_iter() captures pos before generic_write_checks(), which moves ki_pos to EOF for O_APPEND writes: fuse_direct_write_iter() { pos = iocb->ki_pos; /* 0 (user-supplied) */ generic_write_checks(); /* ki_pos -> EOF */ fuse_direct_io(); /* writes at EOF, correct */ invalidate(pos, pos + res); /* [0, res) -- wrong */ } The post-write invalidation targets a stale range instead of the actual written range at EOF. This can cause data inconsistency when the file size is not page-aligned. The tail page straddling EOF has a valid portion before EOF that concurrent readers can fault back in during the DIO write window: Tail page (file size X not page-aligned): page_start X (EOF) page_end |--- valid data ----|-- stale --| CPU0 (O_APPEND DIO writer) CPU1 (buffered reader) -------------------------- ---------------------- invalidate [X, X+len) tail page evicted FUSE_WRITE in flight ... read [p

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: fuse: Fix the condition to enable over-io-uring The existing condition in fuse_uring_cmd()CVE-2026-90095 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: fuse: Fix the condition to enable over-io-uring The existing condition in fuse_uring_cmd() is there only to avoid disabling io-uring for connections that already run with it, missing was a condition to refuse any IORING_OP_URING_CMD if the connection/channel didn't get enabled because of missing FUSE_INIT reply flag FUSE_OVER_IO_URING. Without the reply flag the barrier in fuse_uring_ready() doesn't work and IO could already be going on and cause deadlock states (at a minimum one between fch->bg_lock and queue->lock). The change itself is trivial, but brings behavior change, FUSE_OVER_IO_URING has to be set in the FUSE_INIT_REPLY by fuse servers to accept any IORING_OP_URING_CMD. Libfuse does that and the only non-libfuse implementation I found (fractal-fuse) also does it. Qemu patches for fuse-io-uring are not merged yet, as far as I know. Moved up is the smp_load_acquire(&fch->initialized) check, as a fuse-server implementation might try to setup io-uring before FUSE_INIT is processed and might have gotten -EOPNOTSUPP instead of -EAGAIN. Also fixed is a stale comment that explains the handling of the FUSE_OV

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.