Vulnerability database

21,993 results · page 46 of 440

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net: stmmac: restore NET_IP_ALIGN in the RX DMA offset Since the RX path was converted to CVE-2026-90059 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: net: stmmac: restore NET_IP_ALIGN in the RX DMA offset Since the RX path was converted to zero-copy, the page pool page is handed to the stack directly as the skb head, and the offset the DMA engine writes at is what determines the alignment of the packet headers. Before the conversion the payload was copied into an skb obtained from napi_alloc_skb(), which reserves NET_SKB_PAD + NET_IP_ALIGN. The conversion moved the headroom into stmmac_rx_offset() but did not carry over NET_IP_ALIGN, so on architectures where NET_IP_ALIGN is 2 the IP header now lands misaligned: 64 (NET_SKB_PAD) + 14 (ethernet) + 20 (IP) = 98 Same for the XDP branch: 256 (XDP_PACKET_HEADROOM) + 14 (ethernet) + 20 (IP) = 290 On ARM32 this is fatal, because ldm and ldrd trap on unaligned addresses even when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set. Any received echo request panics the machine, e.g: Unhandled fault: alignment exception (0x001) at 0x81873062 Internal error: : 1 [#1] SMP ARM Hardware name: Altera SOCFPGA Arria10 PC is at icmp_echo+0x38/0xa8 LR is at icmp_rcv+0x22c/0x370 Call trace: icmp_echo from icmp

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup qdisc_get_stab() accepts a useCVE-2026-90058 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/sched: bound qdisc_pkt_len to prevent qdisc soft lockup qdisc_get_stab() accepts a user-supplied size table, and __qdisc_calculate_pkt_len() amplifies qdisc_pkt_len() through the overhead, the size-table data (u16), and size_log (up to STAB_SIZE_LOG_MAX). A crafted stab can therefore set qdisc_pkt_len() to ~1 GiB for an ordinary skb. Per-flow deficit schedulers such as DRR and ETS replenish one quantum per loop iteration; with a tiny quantum (1) they spin billions of times under the qdisc lock, producing a soft lockup / RCU stall as illustrated by vega@nebusec.ai. Cap the final qdisc_pkt_len() to QDISC_PKT_LEN_MAX so the size-table amplification cannot drive deficit schedulers into an unbounded loop. A legitimate size table (e.g. qfq's overhead 999999999, which is handled by dropping) is still accepted. Introduce cap QDISC_PKT_LEN_MAX (1 << 20) = 1 MiB which is well above any legitimate single-skb wire length: the largest current skb->len is GSO_MAX_SIZE (524280), and an ATM-style size table (53/48 cell tax) amplifies that to ~578 KB, both comfortably below 1 MiB. At the same time, 1 MiB bounds the deficit

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: slip: remove slip_hangup() to fix use-after-free in slip_receive_buf() Jaeyoung Chung and CVE-2026-90057 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: slip: remove slip_hangup() to fix use-after-free in slip_receive_buf() Jaeyoung Chung and Eulgyu Kim reported a slab-use-after-free read in slip_receive_buf() when racing against tty hangup. tty_ldisc_hangup() calls ld->ops->hangup() while holding only a read lock on tty->ldisc_sem (via tty_ldisc_ref()). Because slip_hangup() simply called slip_close(), it ran concurrently with reader functions such as slip_receive_buf(). slip_close() unregisters and frees the net device and its private struct slip, causing concurrent reader threads in slip_receive_buf() to dereference freed memory. Line discipline close() is already guaranteed to be called under the write lock of tty->ldisc_sem during hangup processing (in tty_ldisc_reinit() or tty_ldisc_kill()). Remove slip_hangup() so teardown is serialized cleanly by slip_close().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net: fec: only stop PTP if it was initialized fec_ptp_init() is only called when fep->bufdCVE-2026-90056 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: fec: only stop PTP if it was initialized fec_ptp_init() is only called when fep->bufdesc_ex is available. However, fec_probe() unconditionally calls fec_ptp_stop() on the failed_init path, and fec_drv_remove() unconditionally calls fec_ptp_stop() during device removal. Check fep->bufdesc_ex before calling fec_ptp_stop() in both paths to avoid stopping PTP when it was not initialized.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: usb: atm: usbatm: fix invalid ci_range initialization syzbot reported a shift-out-of-boundCVE-2026-90055 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: atm: usbatm: fix invalid ci_range initialization syzbot reported a shift-out-of-bounds in __vcc_connect(): UBSAN: shift-out-of-bounds in net/atm/common.c:382:32 shift exponent -1 is negative CPU: 0 UID: 0 PID: 5987 Comm: syz.0.18 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/05/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 ubsan_epilogue+0xa/0x30 lib/ubsan.c:233 __ubsan_handle_shift_out_of_bounds+0x36d/0x400 lib/ubsan.c:494 __vcc_connect+0x14b4/0x19c0 net/atm/common.c:382 vcc_connect+0x328/0x8f0 net/atm/common.c:498 pvc_bind+0x272/0x380 net/atm/pvc.c:52 __sys_bind+0x2e3/0x410 net/socket.c:1976 __x64_sys_bind+0x7a/0x90 net/socket.c:1979 ... ATM device ci_range fields (vpi_bits and vci_bits) represent the number of bits supported for VPI and VCI addressing on the device. net/atm/common.c directly uses these fields as bit shift counts: vpi >> dev->ci_range.vpi_bits vci >> dev->ci_range.vci_bits 1 << vcc->dev->ci_range.vpi_bits 1 << vcc->dev->ci_range.vci_bits usbatm_atm

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: tcp: fix corruption of urgent data on multi-segment retransmit On the normal xmit path, whCVE-2026-90054 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tcp: fix corruption of urgent data on multi-segment retransmit On the normal xmit path, while in urgent mode we refuse to build a multi-segment TSO packet, so every segment gets its own urg_ptr: /* tcp_write_xmit() */ limit = mss_now; if (tso_segs > 1 && !tcp_urg_mode(tp)) limit = tcp_mss_split_point(...); The retransmit path has no such guard. __tcp_retransmit_skb() builds a segs > 1 skb and hands it to the GSO layer, which only advances th->seq per segment and copies urg_ptr verbatim: /* __tcp_retransmit_skb() */ len = cur_mss * segs; /* segs > 1, no urg_mode check */ ... /* tcp_gso_segment(): bumps seq only, urg_ptr is copied */ urg_ptr is an offset from the segment's own seq, so a copied value points at a different place on each segment. The receiver rebuilds the absolute urgent seq as seg.seq + urg_ptr, so it walks a moving urgent point instead of the one OOB byte: seg1 seq 1 urg_ptr 5001 -> urgent @ 5001 (ok) seg2 seq 1001 urg_ptr 5001 -> urgent @ 6001 (wrong, +MSS) seg3 seq 2001 urg_ptr 5001 -> urgent @ 7001 (wrong, +2*MSS) The real OOB byte is never pointed at, so the rec

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_htb: limit htb_classify inner-class filter hops htb_classify() follows eachCVE-2026-90053 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_htb: limit htb_classify inner-class filter hops htb_classify() follows each filter-selected inner class by switching to cl->filter_list, but never bounds the number of hops. A filter on an inner class can point back to itself or to another inner class that points back, creating an infinite loop in the packet classification path with the qdisc lock held and BH disabled — a soft lockup / panic from a single packet. Bound the traversal with a hop counter and drop the packet with a rate-limited warning once the bound is exceeded. The counter is incremented at the point the inner filter chain is picked up, after the TC_ACT_* switch has consumed the classifier verdict, so a terminal TC_ACT_QUEUED/STOLEN/TRAP on the last permitted chain still sets *qerr to __NET_XMIT_STOLEN and the packet is not charged as a drop by this qdisc or its parent. The bound is TC_HTB_MAXDEPTH, taken from HTB's own parameters rather than from the qdisc hierarchy depth limit. Class levels run from 0 to TC_HTB_MAXDEPTH - 1, so a traversal that strictly descends in level can take at most TC_HTB_MAXDEPTH hops. That descent is what

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: tcp: reject non zerocopy devmem tx Devmem tcp tx doesn't work without zero-copy, however iCVE-2026-90051 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tcp: reject non zerocopy devmem tx Devmem tcp tx doesn't work without zero-copy, however it's not currently enforced if NETIF_F_SG isn't present. In this case, tcp_sendmsg_locked() will try the copy path and try to copy data from an iovec which consists of offsets into the dma-buf and would normally fail. Moreover, d9c56501c72fd ("net: tcp: block mixing readable and unreadable frags") relies on that and assumes that the devmem binding is present IFF we're using the zero-copy path, which can be used to mix net-iov and pages in a single skb, and break invariants. Let's reject devmem tx without zero-copy. Note, the parameter check the patch is modifying is too loose, we can create an io_uring request with dmabuf_id and all ZC flags, but which won't have the binding. We replace it with stricter validation.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't skb_tx_error() the source skb in skb_zerocopy() skb_zerocopy() copies fCVE-2026-90049 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.3

  In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't skb_tx_error() the source skb in skb_zerocopy() skb_zerocopy() copies frags from @from into @to. On an skb_orphan_frags() failure it calls skb_tx_error(@from), a destructive operation on the source skb the copy helper does not own. That completes @from's zerocopy uarg and clears SKBFL_ALL_ZEROCOPY, including the SKBFL_SHARED_FRAG page-ownership marker. Both callers already report the failure on their own drop path. nfnetlink_queue does it at nla_put_failure, and Open vSwitch does it in the flow-miss drop arm of ovs_dp_process_packet(), so nothing is lost by dropping it here. On Open vSwitch's OVS_ACTION_ATTR_USERSPACE path the skb is not freed on this error: do_execute_actions() ignores output_userspace()'s return value and, unless the upcall was the last action, keeps forwarding the same skb through the flow's remaining actions. The uarg is completed while that skb is still in flight, telling the producer its buffers are free, and SKBFL_SHARED_FRAG is cleared on an skb the rest of the stack still handles. That flag is what makes esp_input() call skb_cow_data() instead of decrypting in place,

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix slab-out-of-bounds write in ni_create_attr_list() ni_create_attr_list() alloCVE-2026-90048 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix slab-out-of-bounds write in ni_create_attr_list() ni_create_attr_list() allocates a fixed buffer of al_aligned(record_size) (== record_size) bytes and then walks every attribute of the primary MFT record, writing one ATTR_LIST_ENTRY per attribute and advancing the cursor by le_size(name_len), with no check against the end of the buffer; the total size is only computed after the loop. A minimum-size resident attribute occupies SIZEOF_RESIDENT (0x18 = 24) bytes on disk, but an unnamed attribute expands to le_size(0) (0x20 = 32) bytes in the list. Because the number of attributes in a record is not bounded (mi_enum_attr() accepts arbitrarily many equal-type, nameless minimum-size attributes), a crafted record packed with such attributes produces a list larger than record_size and overflows the heap buffer. This is reachable from a crafted, loop-mounted NTFS image: opening the file and adding an attribute (e.g. via setxattr) drives ntfs_set_ea() -> ni_insert_resident() -> ni_insert_attr() -> ni_ins_attr_ext() -> ni_create_attr_list(). BUG: KASAN: slab-out-of-bounds in ni_create_attr_list+0xc48/0x1

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't hand out the flat CCS storage as usable VRAM get_flat_ccs_offset() reads theCVE-2026-90047 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: drm/xe: Don't hand out the flat CCS storage as usable VRAM get_flat_ccs_offset() reads the base of the flat CCS storage from the hardware, scales it by the number of enabled L3 nodes, and rounds the result up to 128K. Everything below that offset is then handed to the VRAM allocator as usable memory. Rounding a limit that means "usable memory ends here" upwards publishes whatever lies between the real base and the rounded one as free memory, and that memory belongs to the compression hardware. The scaled value has no reason to be 128K aligned, and on a Battlemage G21 with 16 GiB it is not: flat CCS base: raw 0x3fafff800, rounded 0x3fb000000 so the last 2 KiB of page 0x3fafff000 is CCS storage, in the allocator's pool. Whatever is allocated there gets that tail overwritten by the compression hardware, which needs no page-table entry, no buffer object and no GPU submission to do it, and does it before userspace exists. On this machine a Mesa VM's level-3 page table landed on that page on every cold boot. It lost the entry covering the compositor's batch-buffer heap, so the compositor's first submission fau

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: don't spin_trylock() in NMI on UP Patch series "mm/page_alloc: fixes for frCVE-2026-90046 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: mm/page_alloc: don't spin_trylock() in NMI on UP Patch series "mm/page_alloc: fixes for free_pages_nolock() on RT/UP". Pre-existing bugs found by Sashiko during review of this other series: https://lore.kernel.org/all/20260703-alloc-trylock-v5-0-c87b714e19d3@google.com/ I have not reproduced these bugs, and I suspect there is no real-world user that is affected by them. This patch (of 2): As noted in can_spin_trylock(), using this is unsafe in this context. commit 620b46ed6ae17 ("mm/page_alloc: return NULL early from alloc_frozen_pages_nolock() in NMI on UP") fixed this on the alloc side but missed the free side. Impact: If BPF programs using these features in NMI (probably tracing) are present on non-SMP builds this might crash the kernel and is probably exploitable by local attackers for privilege escalation.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: USB: gadget: ffs: fix mm lifetime handling io_data stores a pointer to the submitting taskCVE-2026-90045 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: USB: gadget: ffs: fix mm lifetime handling io_data stores a pointer to the submitting task's mm_struct, but does not currently hold a reference to it while async requests are pending. This can result in a use-after-free if the task exits before completion handling finishes. Take a reference with mmgrab() when queuing the read request and release it with mmdrop() on request completion.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix Use-After-Free in AIO error path In ffs_epfile_write_iter() and ffsCVE-2026-90044 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix Use-After-Free in AIO error path In ffs_epfile_write_iter() and ffs_epfile_read_iter(), when ffs_epfile_io() fails with an error other than -EIOCBQUEUED, the io_data structure (`p`) is freed. However, for AIO operations, the kiocb cancel function was already armed and kiocb->private was set to `p`. If a concurrent cancel operation (such as sys_io_cancel()) executes after ffs_epfile_io() fails but before the function frees `p`, a Use-After-Free can occur when the cancellation handler accesses the freed pointer. To securely fix this race condition, we must properly un-arm the cancellation. Invoking `kiocb->ki_complete()` does exactly this by acquiring `ctx->ctx_lock` and safely removing the kiocb from the active sequence. In doing so, it ensures that a parallel io_cancel can no longer discover the kiocb, effectively closing the race window. We then return -EIOCBQUEUED to notify the VFS layer that the kiocb has been consumed and it should avoid attempting to complete the request again or triggering subsequent completion handlers.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: zram: fix slot lock bit position on big-endian 64-bit The slot lock is a bit operation on CVE-2026-90043 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: zram: fix slot lock bit position on big-endian 64-bit The slot lock is a bit operation on the whole __lock word, which flags and ac_time alias as two u32s. On little-endian the lock bit lands in the position ZRAM_ENTRY_LOCK reserves in flags, so the aliasing works out. On 64-bit big-endian it lands in ac_time instead: with ZRAM_TRACK_ENTRY_ACTIME enabled, storing the access time from mark_slot_accessed() or slot_free() wipes out the held lock bit, letting another CPU take the same slot lock; an access time value with that bit set makes the slot look locked forever. Shift the lock bit into the flags half of the word on big-endian 64-bit.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: ceph: properly decrypt filenames in vmalloc() buffers The fscrypt subsystem uses the scattCVE-2026-90042 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: ceph: properly decrypt filenames in vmalloc() buffers The fscrypt subsystem uses the scatterlist crypto API, inheriting its requirement that any buffers are in the linear mapping region. However, the messenger client uses kvmalloc() to create buffers for messages, which will occasionally place those buffers in the vmalloc() region when physical memory fragmentation doesn't permit a large enough kmalloc(). The various callers of ceph_fname_to_usr() directly pass (slices of) raw messages from the MDS without considering that the messages may be in vmalloc() buffers, resulting in oopses especially on non-x86 platforms (see 'Closes:' for more details and a reproducer). Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated fname->ctext, fname->name, and/or oname->name buffers, using `tname` (which, when non-null, must be a linear address; when null, is briefly allocated as necessary) as a bounce buffer to avoid passing any inappropriate addresses to fscrypt_fname_disk_to_usr(). Additionally change parse_reply_info_readdir() -- the only function to supply its own `tname` -- to follow the new "tname must

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: HID: sony: clean up device list on probe failure sony_input_configured() adds some controlCVE-2026-90041 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: HID: sony: clean up device list on probe failure sony_input_configured() adds some controllers to sony_device_list before HID core registers their input devices. input_register_device() can fail after the callback returns successfully. sony_probe() then observes that HID_CLAIMED_INPUT is clear and unwinds, but only stops the HID hardware. The devres-managed sony_sc is freed while its list node remains linked, so the next matching controller traverses freed memory. Initialize the list node and device ID to inactive states. Make list removal idempotent and run the driver-private cleanup on every probe failure path. This also makes a second cleanup safe when sony_input_configured() already unwound a partial initialization before sony_probe() handles the missing input claim. Found by 0sec (https://0sec.ai) using automated source analysis; verified against the HID input registration and probe unwind paths.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped Wire up a gmemCVE-2026-90040 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force vCPUs to reload/recheck their guest-provided VMSA if the backing gmem page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core logic to handle invalidations as VMX does for the APIC-access page, as the two concepts are nearly identical: shove the physical address of a page into the vCPU's control structure: 1. Snapshot the invalidation sequence counter 2. Grab the pfn (from guest_memfd in this case) 3. Acquire mmu_lock for read 4. Re-request reload if retry is needed, otherwise commit the change. Note, the re-request action in #4 is necessary as KVM's retry logic is fuzzy, i.e. can get false positives. If the guest_memfd page has been dropped, at some point a subsequent reload will fail to get a PFN from guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false positive, KVM will retry until there are no relevant MMU notifier events (and will retry in the "outer" loop, i.e. will drop locks and resched as needed). Note #2! Take

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: Guard admin state-revocation walks with NFSD_NET_UP Writing to /proc/fs/nfsd/unlock_CVE-2026-90039 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: NFSD: Guard admin state-revocation walks with NFSD_NET_UP Writing to /proc/fs/nfsd/unlock_filesystem, or sending the NFSD_CMD_UNLOCK_FILESYSTEM or NFSD_CMD_UNLOCK_EXPORT netlink command, walks the NFSv4 client hash tables to revoke open state and cancel async COPY operations. All three handlers gate that walk on nn->nfsd_serv, but a listener added via portlist or netlink listener_set sets nn->nfsd_serv before any nfsd thread starts. nfsd_startup_net() has not yet allocated nn->conf_id_hashtbl, so the walkers dereference a NULL table. A local administrator with CAP_SYS_ADMIN can crash the kernel this way without ever starting the server. nn->nfsd_serv is set when the service is created, which precedes table allocation. NFSD_NET_UP instead brackets the window where the tables are live: set at the end of nfsd_startup_net() and cleared in nfsd_shutdown_net() after they are freed, both under nfsd_mutex. Gating the three unlock paths on NFSD_NET_UP fixes the startup-time NULL dereference while preserving the earlier post-shutdown use-after-free fix.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during export state revocation nfsd4_revoke_export_staCVE-2026-90038 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during export state revocation nfsd4_revoke_export_states() has the same use-after-free as nfsd4_revoke_states(): it drops nn->client_lock across revoke_one_stid() and the following read of clp->cl_minorversion, but the stateid reference it holds does not pin the client. A teardown racing the dropped lock can free the client while revoke_one_stid() still dereferences it. exportfs -u drives this path through NFSD_CMD_UNLOCK_EXPORT, so an administrator removing an export can race a client expiry. Skip a client that is already expiring and otherwise pin it with cl_rpc_users under client_lock before dropping the lock, matching nfsd4_revoke_states().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during close_lru reaping An nfs4_openowner left on nn-CVE-2026-90037 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during close_lru reaping An nfs4_openowner left on nn->close_lru after its final CLOSE keeps its last closed stateid in oo_last_closed_stid, holding only a raw pointer to its nfs4_client. The laundromat reaps timed-out entries, drops nn->client_lock, and calls nfs4_put_stid(), which dereferences the client through cl_lock. Nothing pins the client across that window, so a concurrent force_expire_client() can free it and nfs4_put_stid() reads freed memory. __destroy_client() hits the same race, walking clp->cl_openowners without cl_lock. Pin the client with cl_rpc_users before dropping client_lock, and skip clients already expiring. __destroy_client() then cleans up its own close_lru entries through release_last_closed_stateid(), so teardown no longer races the laundromat.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during blocked-lock reaping A bare lock owner -- its oCVE-2026-90036 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during blocked-lock reaping A bare lock owner -- its only remaining reference a blocked lock on nn->blocked_locks_lru -- holds a raw pointer to its nfs4_client but no reference keeping the client alive. When the per-net laundromat reaps such a lock, freeing the nbl drops the owner reference held through flc_owner, and the final nfs4_put_stateowner() takes the client's cl_lock. Because the laundromat detaches the nbl first, __destroy_client() no longer finds it, so a concurrent force_expire_client() can free the client before nfs4_put_stateowner() runs, dereferencing cl_lock in freed memory. Pin the client with cl_rpc_users before dropping nn->blocked_locks_lock, and skip clients already expiring, whose blocked locks __destroy_client() frees while holding an owner reference. Take nn->client_lock outside nn->blocked_locks_lock. Every other site holds nn->blocked_locks_lock as a leaf, acquiring no further lock, so placing nn->client_lock outside it cannot form a lock-order cycle.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix division by zero in get_estimated_bw() get_estimated_bw() divides by CVE-2026-90035 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix division by zero in get_estimated_bw() get_estimated_bw() divides by link->dpia_bw_alloc_config.bw_granularity, which is zeroed by reset_bw_alloc_struct() and only populated once DP_TUNNELING_BW_ALLOC_CAP_CHANGED has been handled. link_dp_dpia_handle_bw_alloc_status(), the DPCD interrupt handler, calls get_estimated_bw() whenever DP_TUNNELING_ESTIMATED_BW_CHANGED is set, independently of whether DP_TUNNELING_BW_ALLOC_CAP_CHANGED has ever fired for that link. A connected USB4/DPIA tunneling device that reports an estimated-bandwidth change before ever reporting a capability change drives a division by zero in this IRQ path. link_dpia_send_bw_alloc_request() already guards the same bw_granularity division; add the identical guard here rather than introducing a new pattern. (cherry picked from commit f2a961457c33dc34223aad5c9e8971de34a4eed3)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: change kmalloc() to kzalloc() Change the kmalloc() calls in usb_mdc800CVE-2026-90034 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: change kmalloc() to kzalloc() Change the kmalloc() calls in usb_mdc800_init() for irq_urb_buffer and download_urb_buffer to kzalloc(), avoiding potential stack leaks if a shorter message is received in mdc800_usb_irq() and mdc800_usb_download_notify()

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output() The snd_usbmidi_us122l_outpuCVE-2026-90033 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output() The snd_usbmidi_us122l_output() picks a count of 2 on anything slower than high speed and never relates it to ep->max_transfer. The URB buffer holds exactly max_transfer bytes, so a device declaring a one byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX. Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at 0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the USB core only clamps downward. The akai and novation output ops in this file were given the same guard recently. Do the same here.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: usbtv: keep device alive while ALSA card exists The ALSA PCM callbacks store the drCVE-2026-90032 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: media: usbtv: keep device alive while ALSA card exists The ALSA PCM callbacks store the driver state in pcm->private_data. An open PCM file can outlive USB disconnect because usbtv_audio_free() uses snd_card_free_when_closed(). The disconnect path can then drop the V4L2 device reference and free struct usbtv before ALSA releases the substream, so a later close dereferences freed memory in snd_usbtv_pcm_close(). Take a V4L2 device reference for the ALSA card and drop it from the card private_free callback. This keeps struct usbtv valid until ALSA has closed the remaining files and freed the card.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb-storage: ene_ub6250: fix race between scan work and probe ene_ub6250_probe() calls usbCVE-2026-90031 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb-storage: ene_ub6250: fix race between scan work and probe ene_ub6250_probe() calls usb_stor_probe2(), which starts the usb-storage infrastructure and schedules the delayed scan work. The driver then calls ene_get_card_type(), which sends an ENE command through ene_send_scsi_cmd() and the usb-storage bulk transfer helpers. Both the delayed scan work, through usb_stor_Bulk_max_lun(), and ene_get_card_type() use us->current_urb. The scan work serializes this access with us->dev_mutex, but the ENE card-type probe does not. If the scan work runs while ene_get_card_type() is still using us->current_urb, usb_submit_urb() warns that the URB is already active. Serialize ene_get_card_type() with us->dev_mutex, matching the locking used by the scan path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register cCVE-2026-90030 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register controls the behavior of the EndTransfer command used to stop an active transfer. Older DWC3 programming guide revisions recommended setting forceRM=1 when issuing EndTransfer. Newer programming guide revisions recommend issuing EndTransfer with forceRM cleared. With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer aborted through the ep_dequeue path was observed to remain active after EndTransfer completion. A subsequent StartTransfer issued on the same endpoint triggered writes associated with the aborted transfer. This resulted in an SMMU fault because the transfer buffer had already been unmapped during EndTransfer command-completion cleanup. Using forceRM=0 eliminates the issue. Although older DWC3 programming guide revisions recommended setting forceRM=1, no issues are known from using forceRM=0. Clear forceRM when issuing EndTransfer to provide consistent EndTransfer behavior and align with newer programming guide recommendations.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: storage: realtek_cr: fix use-after-free on disconnect realtek_cr_destructor() calls tCVE-2026-90029 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: storage: realtek_cr: fix use-after-free on disconnect realtek_cr_destructor() calls timer_delete() before the chip containing the timer is freed. The timer callback may still be running and can rearm itself, resulting in a use-after-free. Use timer_shutdown_sync() to wait for the callback and prevent further rearming. Do this unconditionally because ss_en may be changed after the timer is armed. Move timer_setup() into init_realtek_cr() so the timer is initialized before any failure path can invoke the destructor. Found by static analysis.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: typec: hd3ss3220: track VBUS enable state per consumer regulator_is_enabled() reportsCVE-2026-90028 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: typec: hd3ss3220: track VBUS enable state per consumer regulator_is_enabled() reports the aggregate regulator state, not whether this consumer holds an enable reference. If another consumer enables VBUS first, the driver can skip its own regulator_enable() call and later attempt to drop a reference it never acquired, triggering an unbalanced regulator disable warning. Track successful enable and disable calls locally. Keep the state unchanged when an operation fails so a later role or ID notification retries the operation while this consumer keeps balanced references.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop cc_debounce_dwork is queuedCVE-2026-90027 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic-typec: disable cc_debounce_dwork on stop cc_debounce_dwork is queued from the set_cc() and start_toggling() callbacks, which run from TCPM's kthread worker. port_stop() returns before tcpm_unregister_port() destroys that worker. Flushing the worker during unregister may therefore run a callback which queues the delayed work after port_stop() has returned. The delayed work can then run after devres has freed pmic_typec_port. Use disable_delayed_work_sync() in port_stop() to cancel a pending instance and prevent the TCPM callbacks from queueing another one. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic: cancel reset_work on stop pdphy_stop() disables IRQs but leaves resCVE-2026-90026 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic: cancel reset_work on stop pdphy_stop() disables IRQs but leaves reset_work pending. If the IRQ handler schedules it just before disable_irq(), the work runs after remove() frees the struct via devm. Call cancel_work_sync() after disabling IRQs to close the window. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: displayport: Fix OOB altmode array index The UCSI displayport driver indCVE-2026-90025 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.7

  In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: displayport: Fix OOB altmode array index The UCSI displayport driver indexes the connector's port altmode array with the GET_CURRENT_CAM response after checking it is not 0xff. The port altmode array is UCSI_MAX_ALTMODES elements long. If the PPM returns an invalid GET_CURRENT_CAM response above UCSI_MAX_ALTMODES and not equal to 0xff, the kernel may crash with an array index OOB error. Update the UCSI displayport driver to verify the current cam is less than UCSI_MAX_ALTMODES before accessing the port altmode array.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs A null-pointer deCVE-2026-90024 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: Fix null-pointer dereference in f_midi2_free_ep_reqs A null-pointer dereference occurs in f_midi2_free_ep_reqs() when attempting to clean up an endpoint that was never initialized. When configuring the MIDI 2.0 gadget via configfs and setting the block direction to SNDRV_UMP_DIR_INPUT, the initialization of the midi1_ep_out endpoint is explicitly skipped during the gadget bind phase (f_midi2_bind()). As a result, the usb_ep->card field remains NULL. Later, when the host sets the alternate setting, f_midi2_set_alt() unconditionally stops both the IN and OUT endpoints by calling f_midi2_stop_eps(), which in turn calls f_midi2_free_ep_reqs() for both endpoints. When f_midi2_free_ep_reqs() is called for the uninitialized midi1_ep_out, it attempts to dereference usb_ep->card to determine the number of requests to free, leading to a crash. Fix this by using usb_ep->num_reqs instead of usb_ep->card->info.num_reqs in f_midi2_free_ep_reqs(). usb_ep->num_reqs is correctly set during f_midi2_init_ep() and remains 0 if the endpoint was never initialized, safely avoiding the loop. For consistency, apply

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers() CVE-2026-90023 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers() Previously fsg_num_buffers_validate() was removed as it was not necessary due to Kconfig setting the limits for n from 2 to 256 with default as 2. However, setting the page content in such a way that kstrtou8() reflects n value as either 0 or 1 bypasses these restrictions leading to a null pointer dereference if n is 0. Fix this by adding a check for n < 2 and returning -EINVAL if n is either 0 or 1 consistent with Kconfig logic.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi2: fix use-after-free in string attribute show path f_midi2_opts_str_shCVE-2026-90022 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi2: fix use-after-free in string attribute show path f_midi2_opts_str_show() takes the string lock internally, but its callers dereference the opts->info.<field> pointer before calling it, outside the lock. This races with f_midi2_opts_str_store(), which frees the old string under opts->lock when the attribute is written concurrently, the show path can read a pointer that gets freed before the lock inside str_show() is even taken. Change f_midi2_opts_str_show() to take a pointer to the string field, matching the existing pattern in f_midi2_opts_str_store(), and dereference it only after the lock is held. Update all three callers (iface_name, block name, and the EP string option macro) accordingly.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: initialize work in f_midi_alloc() f_midi_alloc initializes free_ref tCVE-2026-90021 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_midi: initialize work in f_midi_alloc() f_midi_alloc initializes free_ref to 1 and it can only be incremented when a sound card is registered via f_midi_register_card(). f_midi_register_card() is only called in f_midi_bind() which actually performs INIT_WORK. If f_midi_bind() is never run, work is not initialized and the if condition in f_midi_free becomes true, this results in a warning later in __flush_work as work->func = 0. Fix this by moving INIT_WORK from f_midi_bind() to f_midi_alloc().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl() gadget_dev_ioctl() reads dCVE-2026-90020 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: USB: gadget: fix NULL pointer dereference in gadget_dev_ioctl() gadget_dev_ioctl() reads dev->gadget before acquiring dev->lock, but dev->state is checked after acquiring the lock. Therefore a concurrent bind can change the device state between these operations, which can leave ioctl with a stale NULL gadget pointer and causing a NULL pointer dereference at gadget->ops->ioctl. Read dev->gadget while holding dev->lock so that the gadget pointer and device state are sampled consistently.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: fix null pointer dereference in usb_put_function_instance() usb_put_function_CVE-2026-90019 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: fix null pointer dereference in usb_put_function_instance() usb_put_function_instance() attempts to dereference fd inside fi struct to get mod in uvc_alloc_inst() error path. However, fd is not allocated until later in try_get_usb_function_instance() after allocating fi in uvc_alloc_inst() and thus guranteed to be null in error path. Fix this by adding a null check for fi->fd that returns if fd is null.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read / stack overflow in rtw_get_wps_attr() rtw_get_wps_attr()CVE-2026-90018 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read / stack overflow in rtw_get_wps_attr() rtw_get_wps_attr() walks WPS attributes inside a WPS IE taken from a wireless management frame. For each candidate attribute it only checks that the fixed 4-byte attribute header (2-byte ID + 2-byte length) fits inside the IE: if (attr_ptr + 4 > wps_ie + wps_ielen) break; u16 attr_id = get_unaligned_be16(attr_ptr); u16 attr_data_len = get_unaligned_be16(attr_ptr + 2); u16 attr_len = attr_data_len + 4; attr_data_len (and therefore attr_len) is read directly from the wire and is never checked against the remaining bytes in the IE before being used as the size of: memcpy(buf_attr, attr_ptr, attr_len); Since attr_len is fully attacker controlled (0 to 65535+4), this is both a heap OOB read of wps_ie, and, more seriously, a stack buffer overflow at several call sites where buf_attr is a single-byte stack variable, e.g. rtw_get_wps_attr_content()'s callers passing WPS_ATTR_SELECTED_REGISTRAR into a stack "u8 sr"/"u8 selected_registrar" (drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c, drivers/staging/rtl8723bs/core/rtw_mlme_ext.c). A c

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_action_frame_parse() rtw_action_frame_parse() takeCVE-2026-90017 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_action_frame_parse() rtw_action_frame_parse() takes a frame_len parameter but never actually checks it before indexing into the frame body: const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr); ... c = frame_body[0]; ... a = frame_body[1]; frame_body already points 24 bytes (sizeof(struct ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and frame_body[1] requires frame_len >= 26. A management action frame shorter than that (e.g. exactly 24 bytes, the minimum a malicious peer can send) causes a 1-2 byte out-of-bounds read. This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass attacker/user-influenced frame buffers and lengths straight through. Add the missing length check before frame_body is dereferenced.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie() rtw_restruct_wmm_ie() scans in_iCVE-2026-90016 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie() rtw_restruct_wmm_ie() scans in_ie for a WMM IE with: while (i < in_len) { ... if (i + 5 < in_len && in_ie[i] == 0xDD && ...) { ... break; } i += (in_ie[i + 1] + 2); /* to the next IE element */ } When the "i + 5 < in_len" match check fails simply because i is within 5 bytes of the end of the buffer (i.e. no WMM IE was found near the tail of in_ie), execution falls through to "i += (in_ie[i + 1] + 2)", which reads in_ie[i + 1]. If i == in_len - 1 at that point, this is a 1-byte out-of-bounds read of an attacker-influenced IE buffer built from association/scan data. Commit a75281626fc8f ("staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie") added the "i + 5 < in_len" guard to the match condition itself, but did not add an equivalent guard before the fallthrough advance, so the same class of OOB read remained reachable through the non-matching path. Add an explicit bounds check before advancing to the next IE.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: xhci: fix lost bounce buffers on TDs spanning several ring segments When a TD reaches a liCVE-2026-90015 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: xhci: fix lost bounce buffers on TDs spanning several ring segments When a TD reaches a link TRB with data that is not aligned to the endpoint's wMaxPacketSize, xhci_align_td() stages the unalignable tail through the bounce buffer of the ring segment holding that link TRB. xhci_unmap_td_bounce_buffer() later unmaps it and, for IN transfers, copies the data back into the URB's buffer. The enqueue path records the segment that was bounced in td->bounce_seg, under the assumption that a TD never spans more than two ring segments. That assumption does not hold: a TD large enough to span three or more segments crosses several link TRBs and can be bounced at each of them. Only the last one survives in td->bounce_seg, so every earlier bounce buffer is neither copied back nor DMA unmapped. The URB still completes with actual_length equal to the requested length and no error, so the transfer looks successful while a wMaxPacketSize sized hole in the destination buffer silently keeps its previous contents. It also leaks a DMA mapping per dropped bounce. Any sufficiently large and fragmented bulk transfer can hit this. It

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Have show_event_filters/triggers files take trace array ref The newly added filesCVE-2026-90014 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tracing: Have show_event_filters/triggers files take trace array ref The newly added files show_event_filters and show_event_triggers that show all filters or triggers that are set within the trace array do not take a reference for the trace array it is showing. Without taking a reference, the trace_array may be freed via "rmdir" while a task is reading one of theses files. Those files iterate all the events within an instance (trace_array) and nothing prevents that instance from being freed while its data is being read. This causes a use-after-free crash. Have the open of both those files take the trace_array reference via the trace_array_get() that prevents the trace_array from being freed while the files are opened.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening options file The options files do not takCVE-2026-90013 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening options file The options files do not take the trace_array reference for the options they represent. This could cause a use-after-free kernel crash if one of these files is opened by one task and another task removes the instance that the option is for. Because it doesn't take a reference upon opening, it will not stop the removal which will free the options descriptor that is being used. As the options are somewhat dynamic in their creation at boot up, each file represents a flag in the trace_array. The trace_array has an array of indexes to represent each of these flags that is stored in the trace_flags_index array. The address of the index array element is used to pass to the inode->i_private pointer. Then that element is read which holds the index (which represents the flag) and then the index is used to calculate the trace_array descriptor from its trace_flags_index array. One issue is that the index element can not be referenced until the trace_array's reference is taken. To handle this, create a new helper function called: trace_array_options_get() that wi

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: spi: Fix DMA mapping ownership on partial map failure If RX mapping fails after TX mappingCVE-2026-90012 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: spi: Fix DMA mapping ownership on partial map failure If RX mapping fails after TX mapping succeeds, __spi_map_msg() unmaps TX but leaves tx_sg_mapped set. If TX mapping fails on a later transfer, mappings created for earlier transfers remain active. In both cases, cur_{tx,rx}_dma_dev have not yet been updated because they are assigned only after every transfer has been mapped. The subsequent spi_unmap_msg() may therefore unmap the TX mapping again or release earlier mappings using a NULL or stale device. Using a NULL device can trigger an oops. An empty SG table does not prevent the NULL dereference because dma_unmap_sg_attrs() accesses the device before checking the entry count. Publish both mapping devices before mapping starts and unwind all failures through __spi_unmap_msg(). This clears the mapping flags and releases each mapping once with the device that created it. Publishing the devices before the loop also refreshes them when no transfer needs mapping. No mapping flag is set in that case, so current users do not use the pointers as mapping owners.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Reserve a terminator byte for the login payload iscsi_target_check_loCVE-2026-90011 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Reserve a terminator byte for the login payload iscsi_target_check_login_request() rejects a login PDU whose DataSegmentLength exceeds MAX_KEY_VALUE_PAIRS, but the test is '>' and login->req_buf is allocated with exactly MAX_KEY_VALUE_PAIRS bytes. Since iscsit_get_login_rx() receives payload_length + padding bytes, where padding = ((-payload_length) & 3); any payload_length from 8189 to 8192 fills the whole 8192 byte buffer. The write stays in bounds, but no byte is left for a NUL terminator. The buffer is subsequently consumed as a C string. In the CHAP path chap_check_algorithm() calls kstrdup(a_str), and extract_param() calls strstr(in_buf, pattern) followed by strlen_semi(), none of which take a length. convert_null_to_semi() additionally rewrites every embedded NUL to ';', so even a payload made of well formed NUL separated key=value records is left without a terminator. These walk past the end of the object into adjacent slab memory. It is reachable by an unauthenticated initiator against a portal configured for CHAP; when authentication is not required iscsi_login_zero_tsih_s2() re

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Cap io_uring sense copy to max_response_len Completion copied scmd->sense_len tCVE-2026-90010 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Cap io_uring sense copy to max_response_len Completion copied scmd->sense_len to the user response buffer without honoring max_response_len. After a valid sense, the midlayer sets sense_len to the real length (up to SCSI_SENSE_BUFFERSIZE), so a smaller user buffer was overrun.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Fix TOCTOU in io_uring passthrough command setup scsi_bsg_uring_cmd() reads bsgCVE-2026-90009 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Fix TOCTOU in io_uring passthrough command setup scsi_bsg_uring_cmd() reads bsg_uring_cmd from the shared mmap'd SQE. Userspace can change a field after we check it and before we use it. request_len is the sharp case: it can grow past sizeof(scmd->cmnd) after the bound check and overflow scmd->cmnd in copy_from_user(). READ_ONCE() the SQE fields we check or use into locals before use.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Limit NVMe request size to the PRP chain frame megasas_make_prp_nvme()CVE-2026-90008 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Limit NVMe request size to the PRP chain frame megasas_make_prp_nvme() builds a command's PRP list in cmd->sg_frame, a DMA pool buffer of instance->max_chain_frame_sz bytes, spending one entry per NVMe page of the transfer plus one per page of the buffer for the chain pointer. The loop runs until the transfer is described and never checks the buffer bound. max_hw_sectors comes straight from the MDTS the firmware reports for the drive. On drives with a large MDTS the only thing keeping the list inside the buffer was the block layer default of 1280 KiB, which needs 320 entries, which fit into a 4 KiB frame as that holds 512. But since commit 9b8b84879d4a ("block: Increase BLK_DEF_MAX_SECTORS_CAP") that default is 4 MiB, and such a transfer needs 1025 entries, so the list runs a full page past the end of the frame: sd 1:0:1:0: [sdb] tag#630 page boundary ptr_sgl: 0x00000000ba62d13f BUG: unable to handle page fault for address: ff663bcb81e7c000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page RIP: 0010:megasas_build_and_issue_cmd_fusion+0xeaa/0x187

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.