Vulnerability database

18,668 results · page 39 of 374

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix memory leak in bpf_jit_free When bpf_int_jit_compile() is called for subprCVE-2026-92519 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix memory leak in bpf_jit_free When bpf_int_jit_compile() is called for subprograms, it returns early during the first pass (!prog->is_func || extra_pass is false), keeping ctx->offset alive for the subsequent extra pass. If JIT compilation fails for a later subprogram, the BPF core aborts and calls bpf_jit_free() to clean up the first subprogram. However, bpf_jit_free() fails to free jit_data->ctx.offset, which causes a memory leak of the JIT context offsets array. Fix this by adding the missing kfree(jit_data->ctx.offset) in bpf_jit_free().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix kernel stack corruption in tailcall with CFI When CONFIG_CFI_CLANG is enabCVE-2026-92518 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: riscv, bpf: Fix kernel stack corruption in tailcall with CFI When CONFIG_CFI_CLANG is enabled, prog->bpf_func already skips the kcfi instruction during setup. Including it again in the tailcall jump offset causes it to jump over an extra 4 bytes, skipping the stack pointer adjustment, which will result in kernel stack corruption.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf, riscv: Fix extable handling for arena load_acquire emit_atomic_ld_st() returns 1 to hCVE-2026-92517 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf, riscv: Fix extable handling for arena load_acquire emit_atomic_ld_st() returns 1 to have build_body() skip the zext after a sub-word load_acquire. The caller does "ret = ret ?: add_exception_handler(...)", which skips add_exception_handler() on any non-zero ret, so the extable entry is missing and a faulting PROBE_ATOMIC load_acquire oopses. REG_DONT_CLEAR_MARKER leaves rd stale on fault, and the verifier still thinks the load overwrote it, so a program can leak it through a map. Check ret >= 0 before calling add_exception_handler(), and pass rd for LOAD_ACQ so the fault zeroes rd like a PROBE_MEM load. Return ret unchanged for the zext skip.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Fix offset warn check for bpf_res_spin_lock Sashiko pointed out correctly that the caCVE-2026-92516 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Fix offset warn check for bpf_res_spin_lock Sashiko pointed out correctly that the case statement for BPF_RES_SPIN_LOCK incorrectly checks offset for BPF_SPIN_LOCK. Fix it by checking res_spin_lock_off instead.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve unique-field state across nested structs btf_find_struct_field() initializesCVE-2026-92515 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve unique-field state across nested structs btf_find_struct_field() initializes a fresh seen mask for every recursive descent. Unique special fields in different levels of the same aggregate therefore do not see one another. The duplicate fields can reach btf_parse_fields(), where they trigger an invariant WARN_ON_ONCE(). A crafted user BTF can consequently trigger the warning before map creation checks capabilities. Initialize the seen mask once in btf_find_field() and pass the same pointer through struct, datasec, and nested-struct walks. This gives the entire field traversal one shared uniqueness state.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Fix CEQ tasklet use-after-free on removal Each CEQ interrupt handler only scheCVE-2026-92514 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Fix CEQ tasklet use-after-free on removal Each CEQ interrupt handler only schedules eqc->tasklet. The tasklet calls erdma_ceq_completion_handler(), which reads the DMA-coherent EQ ring through get_next_valid_eqe() and updates eq->dbrec through notify_eq(). erdma_ceqs_uninit() frees each CEQ IRQ and then destroys its EQ. free_irq() prevents another hard IRQ and waits for an in-flight handler, but it does not drain a tasklet that the handler already scheduled. The tasklet can therefore access eq->qbuf or eq->dbrec after erdma_eq_destroy() frees them. Clearing ceq_cb->ready does not synchronize with a tasklet that already passed the check at the start of erdma_ceq_completion_handler(). Kill the tasklet after free_irq(), when no handler can schedule it again, and before erdma_ceq_uninit_one() releases the EQ buffers.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: drain QP references after partial table insertion mana_table_store_ud_qp() pCVE-2026-92513 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: drain QP references after partial table insertion mana_table_store_ud_qp() publishes a QP at its send-queue id before inserting the receive-queue id, dropping the XArray lock between the two xa_insert_irq() calls. A concurrent completion handler can look up the QP and take a transient reference. When the second insertion fails, the rollback erased only the send-queue entry and returned, leaving both the initial table reference and the transient reference outstanding while RDMA core frees the QP, causing a use-after-free. Drain the reference as normal destruction does: drop the initial reference and wait for qp->free, releasing the QP only after every concurrent lookup returns its reference.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix use after free in ib_query_qp() When querying a QP via the netlink flow theCVE-2026-92512 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix use after free in ib_query_qp() When querying a QP via the netlink flow the only synchronization mechanism for the said QP is rdma_restrack_get(), meanwhile during the QP destroy path rdma_restrack_del() is called at the end of the ib_destroy_qp_user() function which is too late, since by then the vendor specific resources for said QP would already be destroyed, and till the rdma_restrack_del() is called this QP can still be accessed, which could cause the use after free below. Fix this by moving the rdma_restrack_begin_del() to the start of the ib_destroy_qp_user(), which in turn waits for all usages of the QP to be done then removes it from the database to prevent access to it while it is being destroyed. RIP: 0010:ib_query_qp+0x15/0x50 [ib_core] Code: 48 83 05 5d 8e b9 ff 01 eb b5 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 c7 46 40 00 00 00 00 48 c7 46 78 00 00 00 00 <48> 8b 07 48 8b 80 88 01 00 00 48 85 c0 74 1a 48 83 05 54 91 b9 ff RSP: 0018:ff11000108a8f2f0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ff11000108a8f370 RCX: ff11000108a8f370 RDX: 0000000000000000 RSI: ff11000108a8f3d8

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_cq_user() When accessing a CQ via thCVE-2026-92511 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_cq_user() When accessing a CQ via the netlink path the only synchronization mechanism for the said CQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_cq_user(), which is too late, since by that point vendor-specific resources associated with the CQ might already be freed. This can leave a short window where the CQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_cq_user(), ensuring that the CQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a CQ that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_srq_user() When accessing a SRQ via CVE-2026-92510 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_destroy_srq_user() When accessing a SRQ via the netlink path the only synchronization mechanism for the said SRQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_destroy_srq_user(), which is too late, since by that point vendor-specific resources associated with the SRQ might already be freed. This can leave a short window where the SRQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_destroy_srq_user(), ensuring that the SRQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a SRQ that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in counter_release() When accessing a counter via CVE-2026-92509 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in counter_release() When accessing a counter via the netlink path the only synchronization mechanism for the said counter is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of counter_release(), which is too late, since by that point vendor-specific resources associated with the counter might already be freed. This can leave a short window where the counter remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_del() call to be before the freeing of the vendor-specific resources, ensuring that the counter is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a counter that is in the process of destruction.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_free_cq() When accessing a CQ via the netlinCVE-2026-92508 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_free_cq() When accessing a CQ via the netlink path the only synchronization mechanism for the said CQ is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_free_cq(), which is too late, since by that point vendor-specific resources associated with the CQ might already be freed. This can leave a short window where the CQ remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_del() call to be before the freeing of the vendor-specific resources ensuring that the CQ is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a CQ that is in the process of destruction.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_dealloc_pd_user() When accessing a PD via thCVE-2026-92507 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix potential use after free in ib_dealloc_pd_user() When accessing a PD via the netlink path the only synchronization mechanism for the said PD is rdma_restrack_get(). Currently, rdma_restrack_del() is invoked at the end of ib_dealloc_pd_user(), which is too late, since by that point vendor-specific resources associated with the PD might already be freed. This can leave a short window where the PD remains accessible through restrack, leading to a potential use-after-free. Fix this by moving the rdma_restrack_begin_del() call to the start of ib_dealloc_pd_user(), ensuring that the PD is removed from restrack before its internal resources are released. This guarantees that no new users hold references to a PD that is in the process of destruction. In addition, this change preserves the intended inverted order between create and destroy routines: resources are added to restrack at the end of successful creation, and hence shall be removed from the restrack first thing during the destruction flow, which keeps the lifecycle management consistent and predictable.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix requested device removal race scmi_protocol_device_unrequest() droCVE-2026-92506 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix requested device removal race scmi_protocol_device_unrequest() drops scmi_requested_devices_mtx while notifying listeners but continues to retain the per-protocol list head. When two SCMI drivers for the same protocol unregister concurrently, one thread can remove the final request and free the list head while the other is running its notifier. The latter then dereferences the freed list head after reacquiring the mutex and can free it a second time. Complete the list and IDR updates, including freeing an empty list head, before dropping the mutex. Keep the blocking notifier outside the critical section and retain only the detached request across the callback.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix undefined behavior in devid_write debugfs function When for_each_pci_segmenCVE-2026-92505 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix undefined behavior in devid_write debugfs function When for_each_pci_segment() loop completes without finding a matching segment, the pci_seg pointer is not NULL but points to an invalid memory location (the list head). Accessing pci_seg->id after the loop causes undefined behavior. Fix this by handling the successful case inside the loop and returning -EINVAL after the loop if no matching segment is found.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: thermal: intel: int3400: clean up ODVP on probe failures evaluate_odvp() creates per-ODVP CVE-2026-92504 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: thermal: intel: int3400: clean up ODVP on probe failures evaluate_odvp() creates per-ODVP sysfs files before the thermal zone and later probe resources are registered. The current unwind path only calls cleanup_odvp() from the late sysfs failure path, so failures after evaluate_odvp() but before that label, including thermal_tripless_zone_device_register() failures, leave the ODVP files and storage behind. Move the ODVP cleanup to the common ART/TRT unwind path so every failure after evaluate_odvp() releases the ODVP state. Also clear the cached ODVP pointers in cleanup_odvp(), because evaluate_odvp() can already call it for partial setup failures while probe continues.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ext4: fix ABBA deadlock in ext4_xattr_inode_cache_find() Syzbot/stress-ng reported an ABBACVE-2026-92503 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ext4: fix ABBA deadlock in ext4_xattr_inode_cache_find() Syzbot/stress-ng reported an ABBA deadlock in ext4 when exercising concurrent xattr workloads (using the ea_inode mount/format option). The deadlock occurs between the running transaction and the eviction thread: - Task 1 (stress-ng): Holds a reference to a shared mbcache_entry (ce) and calls ext4_xattr_inode_cache_find() -> ext4_iget() to retrieve the corresponding EA inode. Since the EA inode is currently being evicted, ext4_iget() blocks in __wait_on_freeing_inode() waiting for eviction to complete. - Task 2 (eviction thread): Currently evicting the same EA inode in ext4_evict_ea_inode(). It calls mb_cache_entry_wait_unused(oe) which blocks waiting for Task 1 to release the reference to the mbcache_entry. To break this deadlock, implement a new ext4_iget() configuration flag named EXT4_IGET_NOWAIT. When set, perform a non-blocking lookup of the inode via VFS's find_inode_nowait() API. If the inode is currently being evicted (marked with I_FREEING or I_WILL_FREE) or created (I_CREATING), or if it is not present in the VFS inode cache (cache

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ext4: clear stale xarray tags on folios skipped during writeback In data=journal mode, theCVE-2026-92502 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ext4: clear stale xarray tags on folios skipped during writeback In data=journal mode, the writeback thread can hit the WARN_ON_ONCE(sb_rdonly(sb)) in ext4_journal_check_start() while the superblock is being remounted read-only during reboot: Workqueue: writeback wb_workfn (flush-253:0) RIP: 0010:ext4_journal_check_start+0x8b/0xd0 Call Trace: __ext4_journal_start_sb+0x3c/0x1e0 mpage_prepare_extent_to_map+0x4af/0x580 ext4_do_writepages+0x3c0/0x1080 ext4_writepages+0xc8/0x1a0 do_writepages+0xc4/0x180 __writeback_single_inode+0x45/0x2f0 writeback_sb_inodes+0x26b/0x5d0 __writeback_inodes_wb+0x54/0x100 wb_writeback+0x1ac/0x320 wb_workfn+0x394/0x470 And followed by the warning: EXT4-fs warning (device vda1): ext4_evict_inode:195: inode #6263: comm (sd-umount): data will be lost This issue is not reproduced every time, but frequently. The reproduction step is to create a VM with 8 CPUs, 16G memory and setup data=journal: sudo tune2fs -o journal_data /dev/vda1 Run fio: rm -f fiotest fio --name=fiotest --rw=randwrite --bs=4k --runtime=6 --ioengine=libaio --iodepth=256 --numjobs=8 --filename=fiotest

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ext4: drain in-flight DIO before buffered write fallback generic/746 started failing interCVE-2026-92501 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ext4: drain in-flight DIO before buffered write fallback generic/746 started failing intermittently on ext3 (no-extent inodes). The test triggers 'Page cache invalidation failure on direct I/O' warnings and subsequent fsync returns -EIO. Adding a 50ms delay between ext4_buffered_write_iter() and filemap_write_and_wait_range() in ext4_dio_write_iter() makes the race almost always reproducible. On no-extent inodes, DIO writes to holes cannot use unwritten extents, so ext4_iomap_alloc() leaves m_flags=0 and ext4_map_blocks() returns 0. The iomap layer then returns -ENOTBLK, causing fallback to buffered I/O. The fallback path in ext4_dio_write_iter() calls ext4_buffered_write_iter() which dirties pages, then does flush and invalidate. However, there's an unprotected window between ext4_buffered_write_iter() returning (with inode lock released) and the subsequent flush+invalidate. Concurrent async DIO completions from other threads can run kiocb_invalidate_post_direct_write() during this window. If pages have been re-dirtied, post-invalidation finds dirty pages and triggers the warning, setting -EIO in the error se

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ext4: use fsdata to track inline data write state and fix race Instead of checking the livCVE-2026-92500 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ext4: use fsdata to track inline data write state and fix race Instead of checking the live inode state (ext4_has_inline_data(inode) and ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) in the write_end handlers, use the fsdata parameter of the address space operations to explicitly pass down the state in which write_begin prepared the write. A concurrent thread (such as ext4_page_mkwrite()) can convert the inline data to an extent between write_begin and write_end. If this happens, the write_end handlers would previously miss the inline write_end path and fall through to extent-based write_end logic. However, since block buffers were never allocated in write_begin, this resulted in NULL pointer dereferences or data loss because folio_buffers(folio) was NULL. Define EXT4_WRITE_DATA_INLINE (4) as a bit flag (Bit 2), treating fsdata as bitwise flags rather than mutually exclusive enums to keep states of the write path independent. Communicate this state via fsdata: 1) ext4_write_begin() and ext4_da_write_begin() set the EXT4_WRITE_DATA_INLINE bit in *fsdata via bitwise OR when an inline write is su

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ext4: validate readdir offset before accessing dirent A corrupted directory can trigger thCVE-2026-92499 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ext4: validate readdir offset before accessing dirent A corrupted directory can trigger the following KASAN report when ext4_readdir() resumes from an invalid position: BUG: KASAN: use-after-free in __ext4_check_dir_entry+0x5ef/0x820 Read of size 2 at addr ffff88810a646000 by task repro_linear/509 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x630 kasan_report+0xce/0x100 __ext4_check_dir_entry+0x5ef/0x820 ext4_readdir+0xcde/0x2b70 iterate_dir+0x1a1/0x520 __x64_sys_getdents64+0x12b/0x220 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> KASAN reports use-after-free because the out-of-bounds access lands in an adjacent freed page. The directory buffer itself is still referenced. ext4_dir_llseek() invalidates the directory cookie so that ext4_readdir() rescans directory entries from the start of the block. The rescan checks only the lower bound of rec_len before advancing. A corrupted rec_len can therefore place the offset where the block has insufficient space for a complete directory entry. The rescan itself may dereference that tr

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: avoid buffer overreads in WMI event handlers The following WMI event handlerCVE-2026-92498 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: avoid buffer overreads in WMI event handlers The following WMI event handlers currently read from the event buffer without first verifying that the message was large enough to hold the expected event: ath6kl_wmi_scan_complete_rx() ath6kl_wmi_addba_req_event_rx() ath6kl_wmi_delba_req_event_rx() Add length checks to prevent overread.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid buffer overread in ath12k_wmi_op_rx() Currently, in ath12k_wmi_op_rx()CVE-2026-92497 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid buffer overread in ath12k_wmi_op_rx() Currently, in ath12k_wmi_op_rx(), the firmware buffer is read without first verifying that the buffer has enough data to hold a header. This could result in a buffer overread. Update the logic to verify the buffer contains at least enough data to hold a wmi_cmd_hdr before reading from the buffer. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Avoid buffer overread in ath11k_wmi_tlv_op_rx() Currently, in ath11k_wmi_tlvCVE-2026-92496 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Avoid buffer overread in ath11k_wmi_tlv_op_rx() Currently, in ath11k_wmi_tlv_op_rx(), the firmware buffer is read without first verifying that the buffer has enough data to hold a header. This could result in a buffer overread. Add an upfront length check before dereferencing skb->data as a wmi_cmd_hdr. The check is placed before the trace_ath11k_wmi_event() call to preserve the existing trace semantics (tracing the full raw WMI event including the header), unlike the analogous ath12k fix which could use skb_pull_data() directly. Compile tested only.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Clear VM_MAYWRITE on DBR/toggle page mmap bnxt_re_mmap() rejects VM_WRITE foCVE-2026-92495 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Clear VM_MAYWRITE on DBR/toggle page mmap bnxt_re_mmap() rejects VM_WRITE for the DBR_PAGE and TOGGLE_PAGE mmap flags, but a read-only mapping can still retain VM_MAYWRITE. nd later be upgraded with mprotect(PROT_WRITE). This can bypass the write check that only runs at mmap time. Clear VM_MAYWRITE before vm_insert_page() in the shared DBR/toggle-page branch, matching the existing policy that userspace writes are not expected for these pages.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ext4: fix buffer_head leak in ext4_init_orphan_info ext4_init_orphan_info() reads orphan fCVE-2026-92494 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ext4: fix buffer_head leak in ext4_init_orphan_info ext4_init_orphan_info() reads orphan file blocks with ext4_bread() and stores the returned buffer_head in oi->of_binfo[i].ob_bh. If ext4_bread() succeeds but the orphan block magic or checksum validation fails, the function jumps to out_free. However, the old out_free loop starts releasing buffers from i - 1, so the current buffer_head at index i is skipped. This leaks the buffer_head reference obtained by ext4_bread() on the bad magic and bad checksum error paths. Fix this by tracking the number of successfully read buffer_heads and releasing exactly those buffer_heads on the error path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate-ut: Skip tests when amd-pstate driver is not active The crash issue maCVE-2026-92493 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate-ut: Skip tests when amd-pstate driver is not active The crash issue may occur when modprobe amd_pstate_ut on intel platform. amd_pstate_ut: 1 amd_pstate_ut_acpi_cpc_valid success! amd_pstate_ut: 2 amd_pstate_ut_check_enabled success! BUG: kernel NULL pointer dereference, address: 0000000000000080 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 20300 Comm: modprobe Kdump: loaded Tainted: G O 6.6.0-0010.rc1.ctl4.x86_64 #1 Hardware name: FiberHome R2200 V5/Xeon Boards, BIOS 3.1a 02/24/2020 RIP: 0010:amd_pstate_ut_check_perf+0x141/0x280 [amd_pstate_ut] Call Trace: <TASK> amd_pstate_ut_init+0x1b/0xff0 [amd_pstate_ut] ? __pfx_amd_pstate_ut_init+0x10/0x10 [amd_pstate_ut] do_one_initcall+0x42/0x2e0 ? kmalloc_trace+0x26/0x90 do_init_module+0x60/0x240 __se_sys_init_module+0x185/0x1c0 do_syscall_64+0x62/0x190 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Add state detection to amd pstate driver to prevent amd_pstate_ut driver fro

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: cpufreq/amd-pstate: handle missing policy in dynamic EPP callbacks cpufreq_cpu_get() returCVE-2026-92492 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: cpufreq/amd-pstate: handle missing policy in dynamic EPP callbacks cpufreq_cpu_get() returns NULL when no cpufreq policy is associated with the requested CPU, for example because the CPU is offline or the policy has already been torn down. Both amd_pstate_power_supply_notifier() and amd_pstate_profile_set() acquire a policy via cpufreq_cpu_get() and then pass that pointer to amd_pstate_get_balanced_epp() and amd_pstate_set_epp(), which dereference it unconditionally. A racing CPU hotplug or driver teardown can therefore lead to a NULL pointer dereference on either of these dynamic EPP paths. The third cpufreq_cpu_get() caller in this file, amd_pstate_verify(), already handles the NULL case. Bring the two new callers in line with that pattern: return NOTIFY_OK from the power-supply notifier (matching the other "nothing to do" exits) and -ENODEV from amd_pstate_profile_set() (the usual cpufreq error for a missing CPU policy). Found by code inspection; not tested on hardware.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Roll back partial protocol table registration scmi_protocol_table_regiCVE-2026-92491 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Roll back partial protocol table registration scmi_protocol_table_register() can leave earlier requests registered when a later entry in the same ID table fails. Each request retains a pointer to the driver's ID table, so a failed module load can leave a dangling pointer after the module storage is released. Unrequest only the successfully registered prefix, in reverse order, before returning the failure. Leave the failed entry and the remaining entries untouched because matching requests can be owned by another driver.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unrequest devices if driver registration fails scmi_driver_register() CVE-2026-92490 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unrequest devices if driver registration fails scmi_driver_register() requests protocol devices before registering the driver. If driver_register() fails, those requests remain in the global IDR and retain pointers to the module's ID table. Once the failed module load releases that storage, later request matching or SCMI device creation can dereference the stale pointers. Unrequest the complete protocol table before returning the registration failure. At this point table registration succeeded, so every entry is owned by the current registration attempt.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix skb double-free in xfrm_dev_direct_output() A return value other than 1 from locCVE-2026-92489 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix skb double-free in xfrm_dev_direct_output() A return value other than 1 from local_out() means that the skb has been consumed or its ownership was transferred. xfrm_dev_direct_output() nevertheless frees the skb on this path, causing a double-free when netfilter drops the packet and invalidating any other owner. Return the local_out() result directly, matching the ownership handling in xfrm_output_resume().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: complete object teardown when the destroy command fails erdma_destroy_qp(), erCVE-2026-92488 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: complete object teardown when the destroy command fails erdma_destroy_qp(), erdma_destroy_cq(), erdma_dereg_mr(), and erdma_destroy_ah() returned early when erdma_post_cmd_wait() failed, leaking the queue buffers, MTTs, doorbells and the STAG, QPN, CQN and AHN identifiers. A command timeout clears ERDMA_CMDQ_STATE_OK_BIT and permanently disables the command queue, so no retry can succeed; the RDMA core keeps the object after a failed destructor and forced uverbs cleanup then nulls the pointers, making the resources unreachable. Warn on failure but release every software-owned resource and return success, since during terminal destruction the hardware command result is only diagnostic.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: exfat: fix valid_size extension over a shared writable mapping When a shared writable mappCVE-2026-92487 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: exfat: fix valid_size extension over a shared writable mapping When a shared writable mapping has its valid_size extended by a buffered write or a page fault, exfat zeroes the page-cache gap below the new valid_size. A store through the mapping can race with this zeroing and be overwritten. Fix this by zeroing the gap lazily. Drop ->map_pages so that every first write fault goes through exfat_page_mkwrite(), which advances valid_size to cover the faulting page. With fault-around enabled, a store could install a writable PTE, skip ->page_mkwrite(), and land past valid_size without advancing it. Extending valid_size one faulting page at a time also leaves never-written pages in a large mapping alone. The gap is filled with block granularity, zeroing only the not-uptodate blocks and preserving blocks that may hold data stored through the mapping. On the buffered-write path the invalidate lock is held and the gap is unmapped before zeroing, so a racing store re-faults and, under the inode lock, completes only after the gap has been zeroed and valid_size covers it.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Fix CFI mismatch in task work callback BPF subprograms use the bpf_callback_t ABI, buCVE-2026-92486 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Fix CFI mismatch in task work callback BPF subprograms use the bpf_callback_t ABI, but task work invokes the callback through a three-argument function pointer. This trips kCFI. Store and invoke the callback as bpf_callback_t.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARNING in bpf_tracing_link_release The trampoline could be corrupted by the blinCVE-2026-92485 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARNING in bpf_tracing_link_release The trampoline could be corrupted by the blindly 'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier. 1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became 'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the trampoline would poke the target prog's nop insn using jmp insn instead of call insn. 2. Another fexit loaded with the same tail_call_reachable prog target. 'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'. 3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in 'tr->flags', the trampoline will fail to restore the prog's nop insn using call insn. [ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98 ... [ 3.428793] bpf_link_free+0x58/0x130 [ 3.429293] bpf_link_release+0x23/0x30 Fix the warning by updating 'tr->flags' with '|=' and lock.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix use-after-free in find_pos_and_ways() error path The error path releases iCVE-2026-92484 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fix use-after-free in find_pos_and_ways() error path The error path releases its reference to a switch decoder before logging an error that includes the decoder name. If the released reference is the last one, the decoder can be freed before the error message accesses its name. Drop the reference after the error is reported.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: liveupdate: Remember FLB retrieve() status LUO keeps track of successful retrieve attemptsCVE-2026-92483 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: liveupdate: Remember FLB retrieve() status LUO keeps track of successful retrieve attempts on an FLB. It does so to avoid multiple retrievals of the same FLB. Multiple retrievals cause problems because once the FLB is retrieved, the serialized data structures are likely freed and the FLB is likely in a very different state from what the code expects. All this works well when retrieve succeeds. When it fails, luo_flb_retrieve_one() returns the error immediately, without ever storing anywhere that a retrieve was attempted or what its error code was. If the user attempts to retrieve another file registered with the same FLB, LUO will attempt to call the FLB's retrieve() callback again. The retry is problematic for much of the same reasons listed above. The FLB is likely in a very different state than what the retrieve logic normally expects (e.g. some KHO pages may have already been restored and freed). There is no sane way of attempting the retrieve again. Remember the error retrieve returned and directly return it on a retry. This is done by changing the retrieved bool to a retrieve_status integer. A value of

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip The gpio_chip is allocated wCVE-2026-92482 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip The gpio_chip is allocated with device-managed memory but registered with the non-managed gpiochip_add_data(). This was harmless while the drivers were built-in, but once they can be built as modules and unbound/rmmod'd, devm frees the gpio_chip's memory while it is still registered, causing a use-after-free. Register it with devm_gpiochip_add_data() so it shares the same device-managed lifecycle, which also lets the manual gpiochip_remove() error paths go away.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: free EINT resources on unbind mtk_eint_do_init() creates an IRQ domain,CVE-2026-92481 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: free EINT resources on unbind mtk_eint_do_init() creates an IRQ domain, populates it with a mapping for every EINT line and installs a chained handler on the parent interrupt, but none of these are ever released. This was harmless while the drivers were built-in, but now that they can be built as modules and unbound/rmmod'd it leaves behind a dangling IRQ domain, interrupt mappings whose chip data points at freed memory, and a chained handler that keeps firing into that freed data. The plain allocations in mtk_eint_do_init() already use the device-managed devm_*() helpers, so tear the remaining resources down the same way: register a devm action that detaches the chained handler, waits for any in-flight handler to finish, disposes of the per-line mappings and removes the IRQ domain. This mirrors the device-managed lifecycle adopted for the GPIO chip and keeps the whole EINT setup self-cleaning on unbind.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate string descriptors The string descriptor length includes a two-bCVE-2026-92480 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate string descriptors The string descriptor length includes a two-byte header while the UTF-16 payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code units, not bytes. Passing the payload byte count can make it read beyond the descriptor buffer. Validate that the payload has an even byte count, pass a code-unit count to the converter, and allocate sufficient UTF-8 output space. The raw string buffer starts after the descriptor header but its size is bLength. Copying bLength bytes from that pointer can read beyond the response buffer. Allocate a zeroed bLength-sized buffer and copy only the UTF-16 payload. This preserves the raw buffer size consumed by the RPMB device-ID ABI while avoiding the overread.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: Avoid NULL CQE dereference when reporting invalid tags The single-doorbell compCVE-2026-92479 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: Avoid NULL CQE dereference when reporting invalid tags The single-doorbell completion path can call ufshcd_compl_one_cqe() with a NULL CQE. If no command is associated with the completion tag, the warning message dereferences the CQE while reporting the error. Avoid that dereference and include the invalid tag in the warning.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate connected lane counts The connected lane count is used by TX equCVE-2026-92478 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate connected lane counts The connected lane count is used by TX equalization code to index arrays sized by UFS_MAX_LANES. Reject zero and out-of-range RX or TX lane counts before they can be propagated.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: debugfs: Reserve space for a string terminator ufs_saved_err_write() copies useCVE-2026-92477 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: debugfs: Reserve space for a string terminator ufs_saved_err_write() copies user input into a zero-initialized stack buffer and passes it to kstrtoint(). A write that fills the entire buffer overwrites its only terminator. Reject an input whose length leaves no room for the trailing NUL.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: crypto: keembay - Initialize completion before requesting IRQ kmb_ocs_aes_probe() requestsCVE-2026-92476 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: crypto: keembay - Initialize completion before requesting IRQ kmb_ocs_aes_probe() requests the device IRQ before initializing irq_completion. Once the handler is registered it can run immediately, and ocs_aes_irq_handler() unconditionally calls complete(). An interrupt in this window would therefore use an uninitialized completion. Initialize the completion before requesting the IRQ, as the sibling OCS HCU and ECC drivers already do.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix integer overflow of user QP buffer size set_user_buf_size() computes the QPCVE-2026-90435 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix integer overflow of user QP buffer size set_user_buf_size() computes the QP buffer size by left-shifting the user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers. A sufficiently large rq.wqe_cnt causes signed integer overflow, which is undefined behavior, and yields a small or negative buf_size, causing ib_umem_get() to map a buffer smaller than the hardware will actually write into. Replace the shifts and addition with check_shl_overflow() and check_add_overflow(), rejecting invalid user inputs. Moreover, guard the identical shift computing qp->sq.offset in _create_user_qp() before set_user_buf_size() is reached.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: isofs: release zisofs block pointer buffer head zisofs_fill_pages() reads the compressed bCVE-2026-90434 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: isofs: release zisofs block pointer buffer head zisofs_fill_pages() reads the compressed block pointer table. The error paths release the current buffer_head, the loop also releases the old buffer_head when it advances. However, the success path leaves the last buffer_head referenced. Release it before returning success.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: spi: oc-tiny: switch to managed controller allocation The controller is allocated with theCVE-2026-90433 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: spi: oc-tiny: switch to managed controller allocation The controller is allocated with the non-managed spi_alloc_host() while the interrupt is registered with devm_request_irq(). During removal, spi_bitbang_stop() only unregisters the controller; the subsequent spi_controller_put() then frees the controller together with its embedded driver-private devdata, which is the IRQ handler's dev_id. The devm_request_irq() release action (free_irq()), which drains the handler, does not run until after .remove() returns. A late or latched interrupt can therefore reach tiny_spi_irq() and dereference already-freed memory (e.g. hw->base). Switch to devm_spi_alloc_host() so that the devres LIFO order releases the controller only after free_irq() has drained the handler, and drop the now-redundant spi_controller_put() from .remove(). The probe error path is simplified to direct returns. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: sched_ext: Abort directly from the hardlockup handler scx_hardlockup() defers the abort toCVE-2026-90432 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: sched_ext: Abort directly from the hardlockup handler scx_hardlockup() defers the abort to an irq_work because exit claiming used to take scx_sched_lock and couldn't run from NMI. The deferral is now unnecessary - claiming is NMI-safe and asserting ->aborting is exactly what breaks the live-locks that hard-lock CPUs. Call handle_lockup() directly and drop the irq_work. This also makes the self-detected case recoverable: the perf watchdog fires on the hard-locked CPU itself, where a queued irq_work never runs with IRQs off. Also fix the return value: %true used to be returned whenever sched_ext was loaded, suppressing the kernel's hardlockup report even when the abort was refused. Return %true only when this call initiated the abort.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: remoteproc: Prevent crash handling to race with rproc_del() There's no synchronization betCVE-2026-90431 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: remoteproc: Prevent crash handling to race with rproc_del() There's no synchronization between rproc_crash_handler_work() and rproc_del(), as such it's possible for a driver to be removed while crash-handler work is scheduled, or even executing - resulting in use-after-free issues. To avoid this the scheduled work need to be cancelled and synchronized against before the removal proceeds. In order to ensure that this doesn't race with the reporting, and thereby scheduling new work, a "deleting" flag is introduced. This is similar to the RPROC_DELETE state that was introduced to ensure that "start" didn't race with rproc_del(), but the existing mechanism can not be used as it's valid to call rproc_report_crash() in atomic context - and the "state" is protected by a mutex. In the event that work is cancelled the pm_stay_awake() is left unbalanced and need to be unrolled. The blocking and cancelling of crash-handler work prior to the actual rproc_shutdown() call does have the explicit side-effect that crashes resulting from the shutdown process will not enter the crash-handling path, and as such will not generate

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized tegra241_vintf_CVE-2026-90430 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized tegra241_vintf_init_lvcmdq() stores the freshly allocated vcmdq pointer to the vintf->lvcmdqs[] array, before tegra241_vcmdq_alloc_smmu_cmdq() builds the vcmdq->cmdq. The error ISR dereferences that cmdq, so a latched LVCMDQ error (e.g. one inherited across a kexec) firing in this window would make tegra241_vintf0_handle_error() pass the still-zeroed arm_smmu_cmdq down to __arm_smmu_cmdq_skip_err(), dereferencing NULL queue register pointers. Drop the store from tegra241_vintf_init_lvcmdq() and publish the vcmdq at the end of the allocation instead, with an smp_store_release() that pairs with an smp_load_acquire() in the ISR, which can see a fully built LVCMDQ or NULL. The user-owned LVCMDQ allocation moves accordingly, publishing the vcmdq once tegra241_vcmdq_hw_init_user() succeeds, using a plain store since a user VINTF's lvcmdqs[] has no lockless reader -- the error ISR only walks the VINTF0 array.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.