Vulnerability database

29,210 results · page 34 of 585

• Sep 26, 2026Netty versions from 4.2.11.Final before 4.2.18.Final contain an incomplete hostname verification fix in the QUIC certificate verification path when using a plaiCVE-2026-100665 · Other software · netty · reported by VulnCheckHigh 8.7

  Netty versions from 4.2.11.Final before 4.2.18.Final contain an incomplete hostname verification fix in the QUIC certificate verification path when using a plain X509TrustManager. The BoringSSLCertificateVerifyCallback discards the SSLEngine for plain trust managers, preventing endpoint identification from running even when HTTPS verification is configured. Attackers on the network path can present a certificate chain for the wrong hostname that the plain trust manager accepts, bypassing hostname authentication for QUIC clients.

  Product

  netty

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 26, 2026Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.2.Final through 4.2.17.Final builds the HTTP/3 :authority pseudo-header from the HTTP/1 Host headCVE-2026-100664 · Other software · netty · reported by VulnCheckHigh 8.7

  Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.2.Final through 4.2.17.Final builds the HTTP/3 :authority pseudo-header from the HTTP/1 Host header before considering the authority of an absolute-form HTTP/1 request-target. In HttpConversionUtil.toHttp3Headers(HttpMessage, boolean) — reached via Http3FrameToHttpObjectCodec(false) — a non-empty Host header takes precedence over the request-target authority, contrary to the HTTP/1.1 rule that a server receiving an absolute-form request-target must ignore the Host header. In a Netty-based HTTP/1-to-HTTP/3 gateway, proxy, or protocol bridge, a remote client can send a request such as "GET https://trusted.example/admin HTTP/1.1" with "Host: attacker.example", causing components that validate, authorize, or route on the RFC-defined request-target authority to reach a different decision than the upstream HTTP/3 peer, which receives :authority derived from the conflicting Host header. This authority confusion can affect virtual-host routing, allow-list checks, backend selection, cache keys, and URL generation. The advisory reports integrity impact only (no code execution, memory corruption, or availability impact). Fixed in

  Product

  netty

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Sep 26, 2026Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.2.Final through 4.2.17.Final does not special-case HTTP/1 CONNECT authority-form request-targets whenCVE-2026-100663 · Other software · netty · reported by VulnCheckHigh 8.7

  Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.2.Final through 4.2.17.Final does not special-case HTTP/1 CONNECT authority-form request-targets when converting HTTP/1 messages to HTTP/3 in HttpConversionUtil.toHttp3Headers. The authority-form target (e.g., "CONNECT trusted.example:443") is parsed as a URI, so its host is emitted as :scheme, :path is set to "/", and the HTTP/1 Host header is used as :authority; if no Host header is present the CONNECT target is dropped. In a Netty-based HTTP/1-to-HTTP/3 proxy or gateway, a remote client can send a CONNECT request whose Host header names a different authority than the request-target, producing a malformed HTTP/3 CONNECT whose tunnel :authority is attacker-controlled. This can bypass tunnel allow-lists, egress policy, backend selection, or audit controls that validate the HTTP/1 CONNECT request-target before forwarding over HTTP/3. The issue is fixed in 4.2.18.Final.

  Product

  netty

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Sep 26, 2026Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain an uncontrolled resource consumption vulnerability in the QPCVE-2026-100662 · Other software · netty · reported by VulnCheckHigh 8.7

  Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain an uncontrolled resource consumption vulnerability in the QPACK encoder-stream instruction decoder (QpackEncoderHandler, installed on the peer-initiated unidirectional QPACK encoder stream, type 0x02). The handler accepts an attacker-declared string-literal length of up to Integer.MAX_VALUE (~2 GiB) for the Name Length and Value Length fields of the "Insert With Literal Name" instruction (RFC 9204 §4.3.3), with no per-instruction or per-literal length cap and no cumulation-size limit; the existing HTTP/3 limits (maxHeaderListSize, maxUnknownFramePayloadLength, DEFAULT_MAX_FIELD_SECTION_SIZE) are not applied to this handler. A remote, unauthenticated peer with an established HTTP/3 connection to a default Netty HTTP/3 server can declare a very large literal length and then trickle fewer bytes than declared, causing the ByteToMessageDecoder MERGE cumulator to retain and grow the per-connection buffer, and ultimately triggering a large byte-array allocation. This leads to unbounded per-connection heap growth and OutOfMemoryError, resulting in denial of service. Fixed in 4.2.18.Final.

  Product

  netty

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Sep 26, 2026Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain a denial-of-service vulnerability in the QPACK prefixed-inteCVE-2026-100661 · Other software · netty · reported by VulnCheckHigh 8.7

  Netty's HTTP/3 codec (io.netty:netty-codec-http3) versions 4.2.0.Final through 4.2.17.Final contain a denial-of-service vulnerability in the QPACK prefixed-integer decoder (QpackUtil.decodePrefixedInteger), which does not bound the number of continuation bytes it will process. A remote, unauthenticated peer can open a QPACK unidirectional stream (type 0x02 encoder or 0x03 decoder) and send a first byte with all prefix bits set (e.g. 0xFF for a 7-bit prefix or 0x3F for a 5-bit prefix) followed by an endless run of 0x80 continuation bytes. The decoder returns -1 ('need more bytes'), so callers never consume the input, the ByteToMessageDecoder cumulator grows without bound, and each decode() invocation re-scans the whole accumulated buffer, yielding O(N^2) CPU cost. The result is unbounded per-connection heap growth (OutOfMemoryError) and event-loop CPU starvation, reachable in every configuration. Fixed in 4.2.18.Final.

  Product

  netty

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Sep 26, 2026Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.0.Final through 4.2.17.Final retains unbounded per-stream QPACK encoder state.CVE-2026-100660 · Other software · netty · reported by VulnCheckHigh 8.7

  Netty's HTTP/3 codec (io.netty:netty-codec-http3) from 4.2.0.Final through 4.2.17.Final retains unbounded per-stream QPACK encoder state. QpackEncoder stores a queue and a dynamic-table index tracker for every encoded field section that references the QPACK dynamic table, keyed by the peer-controlled QUIC stream ID, and these entries are released only when the remote decoder sends a Section Acknowledgment or Stream Cancellation instruction — not when the HTTP/3 stream completes. There is no limit on the number of tracked streams, field sections, or retained bytes. A remote, unauthenticated HTTP/3 client can advertise a non-zero QPACK dynamic-table capacity, acknowledge the table insertion so the server reuses a dynamically indexed response header, and then omit all mandatory Section Acknowledgments while issuing sequential requests over a single QUIC connection, bypassing concurrent-stream limits and causing unbounded heap growth until the server exhausts memory (denial of service). Fixed in 4.2.18.Final.

  Product

  netty

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Sep 26, 2026Netty's HTTP/3 codec (io.netty:netty-codec-http3) in versions 4.2.0.Final through 4.2.17.Final does not enforce the RFC 9114 requirement that the :authority pseCVE-2026-100659 · Other software · netty · reported by VulnCheckMedium 6.9

  Netty's HTTP/3 codec (io.netty:netty-codec-http3) in versions 4.2.0.Final through 4.2.17.Final does not enforce the RFC 9114 requirement that the :authority pseudo-header field and a literal host header field, when both present, carry the same value. A remote unauthenticated peer can send a single HEADERS frame containing both fields with differing, attacker-controlled values; the request is accepted and delivered to the application with two conflicting authorities, allowing routing, virtual-host, and access-control decisions to be bypassed when different components in the request path consult different fields. This issue is fixed in 4.2.18.Final.

  Product

  netty

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Sep 25, 2026OpenClaw before 2026.8.2 contains a denial of service vulnerability in the Browser extension relay that allows unauthenticated network sources to exhaust pendinCVE-2026-100527 · Other software · OpenClaw · reported by VulnCheckMedium 6.9

  OpenClaw before 2026.8.2 contains a denial of service vulnerability in the Browser extension relay that allows unauthenticated network sources to exhaust pending-authentication capacity. Attackers can hold every pending slot by maintaining silent WebSocket upgrades, preventing paired extensions from completing Browser Relay Authentication v2.

  Product

  OpenClaw

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Sep 25, 2026CliInvoke and its formerly named `AlastairLundy.CliInvoke` package are .NET libraries for invoking command-line programs and wrapping executable processes.CVE-2026-100369 · Other software · alastairlundy · reported by GitHubHigh 8.4

  CliInvoke and its formerly named `AlastairLundy.CliInvoke` package are .NET libraries for invoking command-line programs and wrapping executable processes. `CliInvoke` versions 2.0.0 through 2.8.4, 2.9.0 through 2.9.3, 2.10.0 through 2.10.4, and 3.0.0-alpha.1 through 3.0.0-beta.1, as well as `AlastairLundy.CliInvoke` versions 2.0.0-alpha.1 through 2.0.0, contain an argument-injection vulnerability in `RunnerProcessFactory` on the 2.x line and `RunnerConfigurationFactory` on the 3.x line. These factories combine runner arguments, a caller-controlled target, and caller-controlled arguments into one `ProcessStartInfo.Arguments` string, allowing a double quote in the target or an argument to terminate an operating-system-level quoted region and inject unintended elements into the runner’s argument vector, potentially resulting in arbitrary command execution when a shell runner is used. The vulnerability is patched in `CliInvoke` versions 2.8.5, 2.9.4, 2.10.5, and 3.0.0-beta.2, and in `AlastairLundy.CliInvoke` version 2.0.2. No complete workaround is available; users unable to upgrade can partially mitigate the issue by removing double quotes from targets and arguments, additionally rem

  Product

  CliInvoke

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.com

• Sep 25, 2026Ciena Navigator Network Control Suite (NCS) contains an information exposure vulnerability in an event-streaming API that does not properly enforce authenticatiCVE-2026-5267 · Other software · Ciena · reported by 7bd90cf1-1651-495e-9ae8-9415fb3c9febHigh 7.5

  Ciena Navigator Network Control Suite (NCS) contains an information exposure vulnerability in an event-streaming API that does not properly enforce authentication. An unauthenticated attacker with network access to the affected service could access the event stream and potentially obtain sensitive information.

  Product

  Navigator NCS

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordciena.com

• Sep 25, 2026CliInvoke is a .NET library for invoking command-line programs, and its `CliInvoke.Specializations` packages provide specialized wrappers for shells such as PowCVE-2026-100368 · Other software · alastairlundy · reported by GitHubHigh 8.4

  CliInvoke is a .NET library for invoking command-line programs, and its `CliInvoke.Specializations` packages provide specialized wrappers for shells such as PowerShell and Windows Command Prompt. `CliInvoke.Specializations` versions 2.2.0 through 2.8.4, 2.9.0 through 2.9.3, 2.10.0 through 2.10.4, 3.0.0-alpha.1 through 3.0.0-alpha.4, and 3.0.0-alpha.8 through 3.0.0-alpha.10, as well as `AlastairLundy.CliInvoke.Specializations` versions 1.0.0-rc.1 through 1.6.1.1, contain an OS command injection vulnerability in their PowerShell and Cmd wrappers. The wrappers pass a caller-controlled target and arguments to `pwsh -Command` or `cmd /c` using a single `ProcessStartInfo.Arguments` string, allowing a double quote in untrusted input to break operating-system-level quoting and cause the shell to execute an additional command with the host process's privileges. The vulnerability is patched in `CliInvoke.Specializations` versions 2.8.5, 2.9.4, 2.10.5, and 3.0.0-beta.1, and in `AlastairLundy.CliInvoke.Specializations` version 2.0.2. No complete workaround is available; users unable to upgrade should reject or remove double quotes from target paths and arguments, additionally reject shell meta

  Product

  CliInvoke.Specializations

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.com

• Sep 25, 2026Integer overflow or wraparound in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network.CVE-2026-100208 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.5

  Integer overflow or wraparound in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network.

  Product

  Microsoft 365 Apps for Enterprise

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordmsrc.microsoft.com

• Sep 25, 2026A flaw was found in NetworkManager-vpnc, a VPN plugin for NetworkManager.CVE-2026-91841 · Other software · GNOME · reported by patrick@puiterwijk.orgHigh 7.8

  A flaw was found in NetworkManager-vpnc, a VPN plugin for NetworkManager. A local unprivileged user can exploit this vulnerability by injecting a newline character into the CA-File path. This manipulation allows the user to execute arbitrary commands as the root user, leading to local privilege escalation.

  Product

  NetworkManager-vpnc

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordaccess.redhat.combugzilla.redhat.com

• Sep 25, 2026A flaw was found in NetworkManager-vpnc.CVE-2026-91840 · Other software · GNOME · reported by patrick@puiterwijk.orgHigh 7.8

  A flaw was found in NetworkManager-vpnc. This vulnerability allows a local unprivileged user to escalate privileges to root. By injecting a newline character into the VPN username field, an attacker can manipulate the vpnc configuration to execute an arbitrary program with root privileges when the malicious VPN connection is activated.

  Product

  NetworkManager-vpnc

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordaccess.redhat.combugzilla.redhat.com

• Sep 25, 2026A flaw was found in NetworkManager-fortisslvpn, the FortiSSLVPN plugin for NetworkManager.CVE-2026-91839 · Other software · GNOME · reported by patrick@puiterwijk.orgHigh 7.8

  A flaw was found in NetworkManager-fortisslvpn, the FortiSSLVPN plugin for NetworkManager. The nm-fortisslvpn-service improperly handles carriage-return/line-feed (CR/LF) characters in VPN connection profile credentials. A local unprivileged user can exploit this by crafting a malicious VPN profile to inject additional configuration directives. This can lead to arbitrary code execution with root privileges when the crafted VPN connection is activated.

  Product

  NetworkManager-fortisslvpn

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordaccess.redhat.combugzilla.redhat.com

• Sep 25, 2026A flaw was found in NetworkManager-sstp, the SSTP VPN plugin for NetworkManager.CVE-2026-91838 · Other software · GNOME · reported by patrick@puiterwijk.orgHigh 7.8

  A flaw was found in NetworkManager-sstp, the SSTP VPN plugin for NetworkManager. A local unprivileged user can exploit this vulnerability by embedding special characters, known as shell metacharacters, into VPN connection profile fields such as CA certificate or proxy settings. These unescaped characters are then processed by the `pppd` daemon, which runs with root privileges, allowing the attacker to execute arbitrary commands with elevated permissions when a malicious VPN connection is activated.

  Product

  NetworkManager-sstp

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordaccess.redhat.combugzilla.redhat.com

• Sep 25, 2026A flaw was found in NetworkManager-iodine, the iodine VPN plugin for NetworkManager.CVE-2026-91837 · Other software · GNOME · reported by patrick@puiterwijk.orgHigh 7.8

  A flaw was found in NetworkManager-iodine, the iodine VPN plugin for NetworkManager. A local unprivileged user can exploit a vulnerability in how the 'nameserver' setting is processed when establishing an iodine VPN connection. By embedding shell metacharacters (special characters that can execute commands) in the 'nameserver' value, an attacker can inject and execute arbitrary commands. These commands run with root privileges before the application drops its elevated permissions, leading to local privilege escalation.

  Product

  NetworkManager-iodine

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordaccess.redhat.combugzilla.redhat.com

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: hsr: free learned nodes on device setup failure hsr_dev_finalize() can fail after a lCVE-2026-100071 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: net: hsr: free learned nodes on device setup failure hsr_dev_finalize() can fail after a lower-device RX handler has already been registered (slave A is added before the failable slave B and interlink adds). RX handlers run in softirq regardless of the master's state, so frames received in that window can learn dynamic nodes into node_db, and the error unwind never releases them. Free both owned dynamic databases in the unwind, mirroring hsr_dellink(). proxy_node_db is provably empty on every current error exit (only interlink RX feeds it, and the interlink add is the last failable step) and is freed for symmetry. The order is safe: hsr_del_port() unregisters each RX handler with synchronize_net() before hsr_del_nodes() runs, which removes remaining entries with list_del_rcu() and defers their release with call_rcu() for readers already under RCU.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet sashiko says: If map_addCVE-2026-100070 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet sashiko says: If map_addr() changes the packet length, such as when the public NAT IP string is shorter or longer than the internal IP, coff will still point to the offset relative to the pre-mangled packet. If the packet shrinks, coff could overshoot the correct position, potentially causing the next ct_sip_parse_header_uri() call to silently skip bytes and miss subsequent Contact headers. Could this lead to a failure to NAT those subsequent headers and leak internal network details?

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026Cross Site Scripting vulnerability in Netgate pfSense 26.03.1-RELEASE allows an attacker to execute arbitrary code via the pfBlockerNG packageCVE-2026-78902 · Other software · reported by MITREMedium 6.1

  Cross Site Scripting vulnerability in Netgate pfSense 26.03.1-RELEASE allows an attacker to execute arbitrary code via the pfBlockerNG package

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordnetspi.comnetspi.com

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix dma mapping leak in stmmac_tso_xmit() In stmmac_tso_xmit(), if the DMA maCVE-2026-98131 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix dma mapping leak in stmmac_tso_xmit() In stmmac_tso_xmit(), if the DMA mapping of an skb fragment fails, the frame is dropped but the DMA mappings already created for the linear part and for the fragments mapped before the failure are never unmapped, leaking DMA mappings. Fix the leak by walking back over the descriptors used by the frame and releasing each of them with stmmac_free_tx_buffer(). Moreover, release the descriptors with stmmac_release_tx_desc() unmapping the DMA buffers.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: netfs: Fix subreq ref leak Fix a subrequest ref leak in netfs_unbuffered_write() in the evCVE-2026-98120 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: netfs: Fix subreq ref leak Fix a subrequest ref leak in netfs_unbuffered_write() in the event that subreq->io_iter ends up zero length during preparation.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: netfs: break unbuffered write when netfs_alloc_subrequest() fails syzbot reported a null-pCVE-2026-98119 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: netfs: break unbuffered write when netfs_alloc_subrequest() fails syzbot reported a null-ptr-deref below [1] following a fault injection in netfs_alloc_subrequest(). [0] When netfs_alloc_subrequest() fails, subreq is NULL. Later, netfs_prepare_write() tries to initialize members of subreq(e.g., source), the issue in [1] is triggered. Let's handle the error of netfs_prepare_write() properly. [0] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 Call Trace: netfs_alloc_subrequest+0x116/0x3f0 netfs_prepare_write+0x76/0x7b0 netfs_unbuffered_write+0x75c/0x2020 netfs_unbuffered_write_iter_locked+0x7d6/0xa80 netfs_unbuffered_write_iter+0x442/0x720 v9fs_file_write_iter+0xbf/0x100 vfs_write+0x6ac/0x1050 [1] KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] RIP: 0010:netfs_prepare_write+0xbc/0x7b0 fs/netfs/write_issue.c:173 Call Trace: netfs_unbuffered_write+0x75c/0x2020 fs/netfs/direct_write.c:111 netfs_unbuffered_write_iter_locked+0x7d6/0xa80 fs/netfs/direct_write.c:290 netfs_unbuffered_write_iter+0x442/0x720 fs/netfs/direct_write.c:382 v9fs

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: netfs: Fix readahead synchronisation issues by loading all folios upfront There are some sCVE-2026-98118 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: netfs: Fix readahead synchronisation issues by loading all folios upfront There are some synchronisation issues that derive from the app thread adding more folios to the rolling buffer whilst the collector thread is looking at them or trying to clear them, such as determining the setting of front_folio_order when the next folio hasn't been added yet, The reason for the rolling buffer approach is that loading the buffer upfront and then dropping all the refs just acquired is quite a slow operation, and loading progressively allows some of the cost to be deferred until after at least some of the I/O is started. Instead, a better way is to load all the folios into the rolling buffer upfront - and then drop the refs later, once the I/O is in progress. (Even better would be for the refs not to be there at all.) Fix this by changing the rolling buffer loader to load all the folios selected by the VM for readahead upfront into the folio queue. The folio queue is allocated a batch worth at a time as we don't know how many folios are involved (the readahead_control struct, alas, has a page count, not a folio count).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix listener task lifetime on netdev events The listener thread exits when its listCVE-2026-98112 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix listener task lifetime on netdev events The listener thread exits when its listening socket is shutdown. The netdevice notifier shuts down the socket before calling kthread_stop(), so the task_struct can be freed before kthread_stop() gets its reference. Create the listener in a stopped state and hold an extra task_struct reference until kthread_stop_put() completes. Also stop and release listeners before freeing their interface records during TCP teardown.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: ethernet: oa_tc6: Improve the error recovery When oversubscribed traffic causes lot oCVE-2026-98105 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: ethernet: oa_tc6: Improve the error recovery When oversubscribed traffic causes lot of buffer overflow errors, probably due to loss of data chunks, driver fails to find a data chunk with end_valid bit set, before it runs out of sk buffer space. As a result, assert is seen during skb_put. Now, check is made if skb buffer has enough tailroom for the incoming data before accepting. If there is no room, current frame is abandoned and it will start looking for a data chunk with start_valid bit, that is a new frame. SK buffer allocation error is considered as recoverable error. rx_buf_overflow flag is too specific and no longer the only condition this flag is used for. Therefore it is renamed as wait_until_start_valid. This is more appropriate as this flag is used to look for the next data chunk with SV bit set, after failures like buffer overflow, buffer allocation failure, skb pointer validity besides buffer overflow error. Not writing to status0 if it reads 0.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted gen_new_kid() fallCVE-2026-98104 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted gen_new_kid() falls back to returning max (htid | 0xFFF) when both idr_alloc_u32() ranges are full, instead of reporting an error. u32_change() trusts that value and inserts a new knode with a handle that is already live in the hash table, breaking handle uniqueness within the table's node ID space. The handle was never reserved in ht->handle_idr, so every later error path that does idr_remove(&ht->handle_idr, handle) removes the reservation of a different, live knode, which is then reused — one failed add compounds into further duplicates. The 4095 limit is per (table, bucket) — ht->handle_idr is per hash table and the range is derived from htid (bucketid), so a table with divisor 256 can legitimately hold 256*4095 knodes. The sibling helper gen_new_htid() has the same silent in-band failure: it returns 0 when the tp_c handle pool (1..0x7FF) is full, and u32_init() publishes the root hash table with handle 0 without checking. Two root tables with handle 0 alias in u32_lookup_ht(), allowing cross-tcf_proto knode add/lookup/delete. Add th

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use rcu_assign_pointer() for __rcu list updates Several places in net/ipv6/mcCVE-2026-98099 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 4.7

  In the Linux kernel, the following vulnerability has been resolved: ipv6: mcast: use rcu_assign_pointer() for __rcu list updates Several places in net/ipv6/mcast.c update RCU-protected lists (np->ipv6_mc_list, idev->mc_list, idev->mc_tomb) using direct pointer assignments instead of rcu_assign_pointer(): 1. In __ipv6_dev_mc_dec(), unlinking a group from idev->mc_list did: *map = ma->next; without rcu_assign_pointer() while concurrent readers traverse idev->mc_list locklessly under rcu_read_lock(). 2. In ipv6_sock_mc_drop() and __ipv6_sock_mc_close(), unlinking a group from np->ipv6_mc_list directly assigned *lnk = mc_lst->next and np->ipv6_mc_list = mc_lst->next without rcu_assign_pointer(), racing with lockless readers in inet6_mc_check(). 3. In __ipv6_sock_mc_join(), mc_lst->next was initialized to np->ipv6_mc_list via raw assignment before publishing mc_lst. 4. In mld_del_delrec() and __ipv6_dev_mc_inc(), __rcu source pointers passed into rcu_assign_pointer() lacked explicit dereference helpers. Fix these by consistently using rcu_assign_pointer() along with mc_dereference() / sock_dereference().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: restore network header before routing and forwarding ipv6_srh_rcv() runs with skCVE-2026-98096 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.4

  In the Linux kernel, the following vulnerability has been resolved: ipv6: sr: restore network header before routing and forwarding ipv6_srh_rcv() runs with skb->data at the Segment Routing Header (SRH) while skb_network_header() points at the IPv6 header. When segments_left > 0, ipv6_srh_rcv() previously restored the skb->data position by pushing sizeof(struct ipv6hdr), assuming the SRH immediately followed the fixed IPv6 header. If another extension header (such as a Hop-by-Hop options header) precedes the SRH, skb_network_offset() remained negative. This led to two problems: 1. During ip6_route_input(), fib6_rules_early_flow_dissect() invokes __skb_flow_dissect() which passes the negative skb_network_offset() to flow dissection, breaking BPF and C flow dissector logic. 2. If forwarded via ip6_forward() or redirected via act_mirred, downstream handlers (like sch_fragment() or neighbour output) pass the negative offset as an unsigned length, triggering OOB memcpy or buffer overflows. Fix this by pushing -skb_network_offset(skb) before routing, ensuring skb_network_offset(skb) is 0 for route lookup / flow dissection as well as downstream forwarding. On the loopback

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace() sip_skip_whitespace() rCVE-2026-98077 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace() sip_skip_whitespace() returns dptr unchanged when its own loop exhausts the buffer (dptr == limit), instead of NULL like its sibling sip_follow_continuation() returns on its own "no more data" path. ct_sip_get_header() only checks for NULL after calling it: dptr = sip_skip_whitespace(dptr, limit); if (dptr == NULL) break; if (*dptr != ':' || ++dptr >= limit) break; so a recognized header name followed only by spaces/tabs running to the exact end of the SIP payload, with no colon, makes the very next statement read one byte past the buffer. Make both "no more data" outcomes return NULL, matching the convention sip_follow_continuation() already uses and that both existing callers already check for.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().CVE-2026-98073 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net: Remove conflicting altnames for dying netns in __dev_change_net_namespace(). syzbot reported the warning in cfg80211_pernet_exit(). [0] The repro does the following: 1. create two device in root netns and non-root netns 2. assign the same altname for the two devices 3. remove the non-root netns Since commit 7663d522099e ("net: check for altname conflicts when changing netdev's netns"), cfg80211_switch_netns() and cfg802154_switch_netns() fail if init_net has a device with the conflicting altname. default_device_exit_net() had the same issue and commit d09486a04f5d ("net: fix removing a namespace with conflicting altnames") fixed it. cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix. Let's generalise the fix by removing conflicting altnames for dying netns in __dev_change_net_namespace(). [0]: cfg80211_switch_netns(rdev, &init_net) WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160 Modules linked in: CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in release_in_xmit() release_in_xmit() clears RDS_IN_XMIT wiCVE-2026-98072 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in release_in_xmit() release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then checks waitqueue_active() to decide whether anyone needs waking. clear_bit_unlock() is only a release operation: it orders the critical section before the bit clear, but does not order the subsequent plain load of the wait queue head after it. The waiter side does the mirror image - it adds itself to the wait queue and then tests the bit. That is the classic store-buffering pattern: the releasing CPU can read the wait queue as empty while the waiting CPU still reads the bit as set, so the sleeper is never woken. The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(), both in uninterruptible wait_event() with no timeout. A lost wake-up strands the shutdown worker on its single-threaded workqueue until some other sender releases the bit again - and on a connection that is being torn down precisely because it failed, there may never be another sender. The barrier used to be there: release_in_xmit() did clear_bit() followed by smp_mb__after_atomic() until commit 1422f28826d2 ("rds:

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: clear cp_flags bits individually in rds_conn_path_reset() rds_conn_path_reset() wCVE-2026-98071 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/rds: clear cp_flags bits individually in rds_conn_path_reset() rds_conn_path_reset() wipes the whole flag word with a plain cp->cp_flags = 0 store. Every other accessor of that word uses atomic bitops, and some of them can run concurrently with the reset: RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the transport completion paths, neither of which holds anything that excludes the shutdown worker. A plain store racing an atomic read-modify-write on the same word is a data race, and whichever side loses has its update silently discarded. Clear the two bits the reset is actually responsible for instead. RDS_IN_XMIT and RDS_RECV_REFILL need no store at all here: they belong to the caller, rds_conn_shutdown(), which waits for both to be clear before calling the transport shutdown and this reset. This also gives every bit in cp_flags a single well-defined writer discipline, which the following patches rely on when they turn RDS_IN_XMIT and RDS_RECV_REFILL into bit locks held across the teardown: a blanket store mid-teardown would destroy lock ownership that an atomic clear preserves. Oracle UE

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks() rds_tcp_reset_callbacks() quiescCVE-2026-98070 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks() rds_tcp_reset_callbacks() quiesces the transmit path by setting the path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to be sampled clear before swapping the underlying socket and calling rds_send_path_reset(). Sampling the bit clear is not the same as owning it: rds_send_xmit() can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its state recheck after taking the lock is a store-buffering pattern (the resetter writes the state and reads the bit, the sender writes the bit and reads the state) and acquire_in_xmit() is only an acquire operation, so on weakly ordered architectures both sides can miss each other's write and the transmit path then runs concurrently with rds_send_path_reset() rewriting cp_xmit_* state - which is exactly what the comment above rds_send_path_reset() tells its callers to prevent. Take the lock instead, hold it across the socket swap and rds_send_path_reset(), and release it with a wake-up at the end. The lock-ordering constraint documented above the wait still holds: the lock is acquired before lock

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire the fastpath locks in rds_conn_shutdown() rds_conn_shutdown() quiesces thCVE-2026-98069 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire the fastpath locks in rds_conn_shutdown() rds_conn_shutdown() quiesces the transmit and receive-refill paths by waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and then runs the transport shutdown and rds_conn_path_reset(). Sampling the bits clear is not the same as owning them: the moment after the wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run concurrently with the teardown. The sender does recheck the connection state after taking the lock, but that recheck is a classic store-buffering pattern: teardown writes the state and reads the bit while the sender writes the bit and reads the state. acquire_in_xmit() is only an acquire operation, so on weakly ordered architectures both sides can miss each other's write, and the transmit path then runs while the transport zeroes its rings (e.g. rds_ib_ring_init()) and rds_send_path_reset() rewrites the transmit state under it. Oracle UEK fixed the same class of crashes - a 14-year tail of BUG_ON()s in rds_ib_sub_signaled(), unexpected op-codes and NULL

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let rds_conn_shutdown() consume a concurrent drop rds_conn_shutdown() finisCVE-2026-98068 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let rds_conn_shutdown() consume a concurrent drop rds_conn_shutdown() finishes by moving the path from RDS_CONN_DISCONNECTING to RDS_CONN_DOWN, and also accepts RDS_CONN_ERROR as the starting state of that final transition, so that a FIN processed in softirq context during the teardown does not derail the shutdown into a noisy error path. But consuming that RDS_CONN_ERROR also consumes the shutdown pass that came with it: rds_conn_path_drop() sets RDS_CONN_ERROR and then queues cp_down_w, and a pass that starts on a path already in RDS_CONN_DOWN is a no-op. For the FIN case that is harmless - the socket the FIN arrived on is the very socket the teardown just released. It is not harmless for a dropper that attached something to the path first. rds_tcp_accept_one() is such a dropper. Its path claim in rds_tcp_accept_one_path() transitions RDS_CONN_DOWN -> RDS_CONN_CONNECTING, and a concurrent drop - a FIN on a previous socket in softirq context, an administrative reset - can put the path into RDS_CONN_ERROR between that claim and the state check that follows, which accepts RDS_CONN_ERROR. The a

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: clear txcb->last before writing each descriptor bcmasp_xmit() only wrote txcbCVE-2026-98052 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: clear txcb->last before writing each descriptor bcmasp_xmit() only wrote txcb->last = true for the final fragment of an SKB; non-final fragments left the field untouched. If a descriptor slot was reused while it still held a stale true from a previous SKB (possible when tx_spb_ring_full() underreported fullness), bcmasp_tx_reclaim() would see last == true mid-SKB and call dev_consume_skb_any() prematurely, freeing the sk_buff while its remaining fragments were still in flight. Unconditionally clear txcb->last before the conditional set so every descriptor slot starts from a known false state regardless of what a prior transmission left behind.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times The loop initialised nextCVE-2026-98051 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times The loop initialised next_index from intf->tx_spb_index on every iteration, so incr_ring() always produced the same result and only one slot was ever tested. Move the initialisation before the loop so each iteration advances next_index and the function correctly checks that cnt consecutive descriptor slots are available before allowing a new transmission.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: bound the CFP rule dump by the caller's buffer size bcm_sf2_cfp_rule_geCVE-2026-98030 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: net: dsa: bcm_sf2: bound the CFP rule dump by the caller's buffer size bcm_sf2_cfp_rule_get_all() walks the whole cfp.unique bitmap into rule_locs[] without consulting nfc->rule_cnt, which is how many entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed CFP rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: eth: nfp: bound the ntuple rule dump by the caller's buffer size nfp_net_get_fs_loc() dumpCVE-2026-98029 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: eth: nfp: bound the ntuple rule dump by the caller's buffer size nfp_net_get_fs_loc() dumps every entry of nn->fs.list into rule_locs[] without consulting cmd->rule_cnt, which is how many entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed flow steering rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it. Bail out with -EMSGSIZE when the buffer fills up, the way the other ntuple capable drivers do, and report how many locations were filled so a shrinking rule list does not leave the caller reading stale slots.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: eth: nfp: drop the replaced rule from the list when reprogramming fails nfp_net_fs_add() rCVE-2026-98028 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: eth: nfp: drop the replaced rule from the list when reprogramming fails nfp_net_fs_add() replaces an existing rule by deleting it from the hardware, decrementing nn->fs.count and programming the new one. If nfp_net_fs_add_hw() fails the old entry stays on nn->fs.list - only the success path reaches list_replace() - so the list is one longer than nn->fs.count, and it advertises a rule whose hardware entry has already been torn down. nn->fs.count is what ETHTOOL_GRXCLSRLCNT reports, so userspace then sizes its buffer one entry short of what the GRXCLSRLALL walk wants to write. That used to overwrite one u32 past the allocation; since the walk is bounded it is a permanent -EMSGSIZE instead, as nothing ever resyncs the counter.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size mv88e6xxx_get_CVE-2026-98027 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: net: dsa: mv88e6xxx: bound the policy rule dump by the caller's buffer size mv88e6xxx_get_rxnfc() uses rxnfc->rule_cnt as the write index while dumping the policy IDR, clobbering the input value before it has been looked at. That input is the number of entries the caller had room for. ETHTOOL_GRXCLSRLALL requires no CAP_NET_ADMIN and the ioctl sizes the buffer from the rule_cnt userspace passes in, so once an admin has installed policy rules any user can ask for fewer slots than there are rules and run off the end of the allocation. A rule_cnt of 0 leaves the buffer pointer NULL and the walk dereferences it. Count into a local so the caller's limit survives the walk, and stop with -EMSGSIZE once it is reached.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: properly convert mglist to rcu Sashiko reported a bug [1] that br_multCVE-2026-98026 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: properly convert mglist to rcu Sashiko reported a bug [1] that br_multicast_del_port_group unlists the port group not using proper rcu helper that preserves the next pointer and after that immediately frees the port group without waiting for rcu grace period. The only rcu walker of mglist is br_multicast_list_adjacent() and it turns out that function has always been buggy because mglist was never properly converted to RCU. Fix it by converting it to rcu and moving its initialization after eth_addr's. Initializing p->next can use RCU_INIT_POINTER because we have a barrier from the hlist_add_head_rcu call later, besides we're initializing an unpublished structure anyway. [1] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260826014200.362304-1-littleddfu%40gmail.com

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: usb: cx82310_eth: drop URB after 0xffff reboot sentinel to prevent partial_data heap oCVE-2026-98025 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: usb: cx82310_eth: drop URB after 0xffff reboot sentinel to prevent partial_data heap overflow The 0xffff length sentinel detects a router reboot and schedules re-enabling of ethernet mode, but then falls through to the rest of the loop body. The next check is } else if (len > CX82310_MTU) { which is the else of the just-matched if -- it never fires for len == 0xffff. The MTU bound that normally caps the incomplete-packet save path is silently bypassed. With 0xffff > skb->len always true (rx_urb_size is 4096), the incomplete-packet branch saves dev->partial_len = skb->len bytes into dev->partial_data. partial_data is kmalloc(hard_mtu) = kmalloc(CX82310_MTU + 2) = 1516 bytes, but skb->len after the 2-byte header pull can be up to 4094. A device that sends a 4096-byte URB starting with [0xff 0xff] therefore copies 4094 device-provided bytes into a buffer allocated for 1516 bytes, exceeding its requested size by 2578 bytes. The next URB then reads dev->partial_len (4094) back from the same 1516-byte buffer and dev->partial_rem (65535 - 4094 = 61441) from the new URB's ~4KB skb, both well past their allo

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: cap tx_queue_len at S16_MAX to prevent oversized ring allocations Several subsystems CVE-2026-98022 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: cap tx_queue_len at S16_MAX to prevent oversized ring allocations Several subsystems allocate ring buffers sized by dev->tx_queue_len with no upper bound. An unprivileged user (via unshare -Urn) can set a huge tx_queue_len and exhaust global memory with ring allocations: - pfifo_fast: pfifo_fast_init() and pfifo_fast_change_tx_queue_len() allocate 3 skb_array rings of tx_queue_len entries each. - tun: tun_queue_resize() and the queue-attach path resize ptr_rings to tx_queue_len on the NETDEV_CHANGE_TX_QUEUE_LEN notifier. - tap (macvtap/ipvtap): tap_queue_resize() and tap_init() resize/init ptr_rings to tx_queue_len on the same notifier. netif_change_tx_queue_len() is the single entry point for IFLA_TXQLEN, sysfs, and the SIOCSIFTXQLEN ioctl. Cap new_len at S16_MAX (32767) there so the oversized value is rejected at set time. This takes effect whether the device is up or down, before dev->tx_queue_len is written, before any notifier fires, and before any ring is allocated. The "> S16_MAX" check also subsumes the previous unsigned-long truncation test, and a negative ifr_qlen from the ioctl lands far a

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: reject oversized tx_queue_len at netlink parse time rtnl_create_link() assigns IFLA_TCVE-2026-98021 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: reject oversized tx_queue_len at netlink parse time rtnl_create_link() assigns IFLA_TXQLEN directly to dev->tx_queue_len without going through netif_change_tx_queue_len(), so a device created with "ip link add ... txqueuelen 500000" bypasses the S16_MAX cap and still triggers the oversized ring allocations in pfifo_fast, tun and tap. The veth peer nest (rtnl_nla_parse_ifinfomsg()) and the RTM_NEWLINK-on-existing-device path reach the same sinks. Enforce the cap in ifla_policy instead: IFLA_TXQLEN becomes NLA_POLICY_FULL_RANGE(NLA_U32, &txqlen_range) with txqlen_range = { .min = 0, .max = S16_MAX }. All netlink consumers parse against this policy - rtnl_setlink(), rtnl_newlink() (create and change), and the veth peer nest - so every netlink path is capped at parse time and rejects the attribute with -ERANGE plus a proper "integer out of range" extack message before any device state is modified (the RTM_SETLINK half-application wart is gone with it). Document the bound in the rt-link.yaml netlink spec. Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y. -

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: mctp: i3c: serialize probe with bus removal mctp_i3c_probe() drops busdevs_lock afterCVE-2026-98018 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: mctp: i3c: serialize probe with bus removal mctp_i3c_probe() drops busdevs_lock after finding the matching bus. A concurrent I3C_NOTIFY_BUS_REMOVE can then unregister and free the bus netdev before probe passes its private data to mctp_i3c_add_device(). The latter consequently adds a list node through a freed mbus pointer. Keep busdevs_lock held until the device has been added. This also satisfies the __must_hold annotation on mctp_i3c_add_device().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: defer qdisc freeing after failed creation An RTM_NEWQDISC request can make clsaCVE-2026-98017 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net/sched: defer qdisc freeing after failed creation An RTM_NEWQDISC request can make clsact bind a populated shared ingress block during ->init(), publishing an embedded mini_Qdisc to lockless readers. If the same request has an invalid TCA_RATE, estimator setup fails after ->init(); the unwind removes the pointer but synchronously frees its containing qdisc while tc_run() may still hold it. Retire failed qdiscs through the same RCU helper as normal destruction. Inline the synchronous free into the callback now that no direct callers remain.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free race in sample_restore_put() Concurrent teardown of TC samplCVE-2026-98016 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix use-after-free race in sample_restore_put() Concurrent teardown of TC sample rules sharing the same restore context may re-read restore->count after dropping restore_lock. At that point another thread may already have completed cleanup and freed the restore object. Use the result of the refcount decrement while holding restore_lock to determine whether cleanup is needed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put In mlx5_eswitch_termtblCVE-2026-98015 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-Switch: fix use-after-free in mlx5_eswitch_termtbl_put In mlx5_eswitch_termtbl_put(), the zero-ref cleanup check reads tt->ref_count after termtbl_mutex has been released. Two concurrent callers on the same mlx5_termtbl_handle race: one decrements ref_count to zero, removes the hash entry, and calls kfree(tt) while the other has already dropped the mutex and is about to evaluate if (!tt->ref_count), producing a use-after-free. Fix this by capturing the result of the decrement into a stack-local last variable before dropping the mutex. The cleanup decision is now made entirely under termtbl_mutex, and tt is not touched after kfree.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.