Vulnerability database

21,993 results · page 34 of 440

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: fix deadlock in usbg_make_tpg() usbg_make_tpg() held dep_lock while caCVE-2026-93214 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: fix deadlock in usbg_make_tpg() usbg_make_tpg() held dep_lock while calling configfs_depend_item_unlocked(), which acquires the configfs root inode lock when operating across subsystems. This creates a circular lock dependency with configfs_rmdir(): dep_lock -> configfs root inode lock -> su_mutex -> dep_lock In usbg_make_tpg(), dep_lock only serialized the read of opts->ready, which is a monotonic flag that transitions from false to true exactly once (in tcm_set_name()) and never reverts. Remove dep_lock from usbg_make_tpg() entirely and use READ_ONCE/WRITE_ONCE to access opts->ready locklessly instead.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: of: fix out-of-bounds read in of_alias_scan() stem parser The stem parser tests isdigit(*(CVE-2026-93213 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: of: fix out-of-bounds read in of_alias_scan() stem parser The stem parser tests isdigit(*(end - 1)) before checking end > start and so reads one byte before the property name when the name is empty or all digits. Check the bound first.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: guard nfsd_serv deref in nfsd_file_net_dispose nfsd_file_net_dispose() is the consumCVE-2026-93212 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: nfsd: guard nfsd_serv deref in nfsd_file_net_dispose nfsd_file_net_dispose() is the consumer side of l->freeme: the nfsd service thread loop calls it to drain entries that the filecache garbage collector and shrinker append via nfsd_file_dispose_list_delayed(). During per-net teardown, nn->nfsd_serv is cleared before the filecache laundrette is shut down, so the service thread can still run a dispose pass that finds more than eight entries on l->freeme and dereferences a NULL svc_serv: nfsd service thread loop nfsd_file_net_dispose(nn) if (!list_empty(&l->freeme)) { ... svc_wake_up(nn->nfsd_serv); /* nn->nfsd_serv == NULL */ } The sibling helper nfsd_file_dispose_list_delayed() already documents this ordering and caches nn->nfsd_serv into a local before testing it for NULL. nfsd_file_net_dispose() was introduced with the same raw svc_wake_up(nn->nfsd_serv) call and never picked up the guard. Fix by loading nn->nfsd_serv into a local svc_serv pointer and only calling svc_wake_up() when it is non-NULL, matching the pattern in nfsd_file_dispose_list_delayed().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: initialize DRC hash table before registering shrinker shrinker_register() precedes tCVE-2026-93211 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: nfsd: initialize DRC hash table before registering shrinker shrinker_register() precedes the INIT_LIST_HEAD loop and the drc_hashsize store. On weakly-ordered architectures (arm64, ppc), a shrinker scan can observe drc_hashsize before the bucket list heads are initialized, causing a NULL deref in the DRC shrinker callback. Move bucket initialization and the drc_hashsize store before shrinker_register() so the hash table is fully initialized before it becomes visible to the shrinker.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: harden DFS cache against invalid target hints Currently, get_tgt_name() returCVE-2026-93210 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: smb: client: harden DFS cache against invalid target hints Currently, get_tgt_name() returns ERR_PTR(-ENOENT) when ce->tgthint is NULL, and dfs_cache_noreq_update_tgthint() assumes ce->tgthint is always valid. In preparation for clearing ce->tgthint in free_tgts(), harden callers of get_tgt_name() against ERR_PTR results and harden dfs_cache_noreq_update_tgthint() against NULL pointer dereferences.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb BT enable fails inteCVE-2026-93209 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb BT enable fails intermittently with -ETIMEDOUT (-110). The kernel log shows the HCI Read Local Version command was sent and the firmware replied with status 0x00 (logged by hci_req_cmd_complete() BT_DBG), but the waiter in __hci_cmd_sync_sk() never woke up and timed out after 10 s: bluetooth hci0: Opcode 0xfc00 // __hci_cmd_sync_sk bluetooth hci0: opcode 0xfc00 plen 1 // hci_cmd_sync_add bluetooth hci0: skb len 4 // hci_cmd_sync_alloc bluetooth hci0: length 1 // hci_req_sync_run Bluetooth: hci0 cmd_cnt 1 cmd queued 1 // hci_cmd_work Bluetooth: hci0 type 1 len 4 // hci_send_frame Bluetooth: opcode 0xfc00 status 0x00 // hci_req_cmd_complete <-- req_skb NULL: req_complete_skb not set, hci_cmd_sync_complete() never called, req_status stays HCI_REQ_PEND --> <-- 10 s later: wait_event_interruptible_timeout expires --> bluetooth hci0: end: err -110 // __hci_cmd_sync_sk The root cause is that hci_send_cmd_sync() clone

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: kasan: fix cache shrink race with CPU hotplug kasan_quarantine_remove_cache() first invokeCVE-2026-93208 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: kasan: fix cache shrink race with CPU hotplug kasan_quarantine_remove_cache() first invokes per_cpu_remove_cache() on all online CPUs. Each callback moves objects belonging to the cache from cpu_quarantine to the CPU's shrink_qlist, where they can later be freed from task context. kmem_cache_destroy() invokes the quarantine removal path while holding cpus_read_lock(), but kmem_cache_shrink() does not. The latter can therefore race with CPU offlining as follows: kmem_cache_shrink() CPU hotplug ------------------- ----------- on_each_cpu() CPU1 moves objects to CPU1's shrink_qlist on_each_cpu() returns CPU1 goes offline kasan_cpu_offline() drains cpu_quarantine leaves shrink_qlist untouched for_each_online_cpu() skips CPU1 The objects left on CPU1's shrink_qlist are not returned to the slab allocator. This may prevent kmem_cache_shrink() from releasing slabs that would otherwise become empty. If CPU1 remains offline, a later

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Zero rpc_gss_wire_cred at svcauth_gss_decode_credbody() entry svcauth_gss_decode_cCVE-2026-93207 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Zero rpc_gss_wire_cred at svcauth_gss_decode_credbody() entry svcauth_gss_decode_credbody() writes the caller's rpc_gss_wire_cred field by field and assigns gc_ctx.len only on the success tail. The caller storage is svcdata->clcred, which lives in the per-svc_rqst gss_svc_data and is reused across requests. Early decode failures leave partially decoded state mixed with residue from the prior request. The trailing body_len tightness check is the sharpest case: xdr_stream_decode_opaque_inline() has already written gc_ctx.data with a borrowed inline pointer into the current request's XDR pages, but gc_ctx.len retains its prior value. Once the request pages are released the pooled clcred carries a dangling pointer paired with a stale length. Zero the caller's rpc_gss_wire_cred at function entry so that every early-return path leaves a deterministic all-zero cred. On the trailing tightness-check path, gc_ctx.len is now zero instead of stale, which neuters length-driven consumers such as gss_svc_searchbyctx() that would otherwise walk the dangling data pointer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: PCI/proc: Use file_ns_capable() when checking config space read access proc_bus_pci_read()CVE-2026-93206 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: PCI/proc: Use file_ns_capable() when checking config space read access proc_bus_pci_read() decides how much of the config space is readable based on capable(CAP_SYS_ADMIN), which checks the credentials of the task calling read(), not the credentials of the process that opened the file. The sysfs equivalent, pci_read_config(), has checked the credentials of the opening process since commit de139a339395 ("pci: check caps from sysfs file open to read device dependent config space"), so a privileged process can open the config space file and pass the file descriptor to an unprivileged process (for example, a process running a KVM guest with an assigned device), which can then read the entire config space. The check was subsequently routed through the LSM framework in commit 47970b1b2aa6 ("pci: use security_capable() when checking capablities during config space read") and converted to the dedicated helper in commit ab0fa82b2df9 ("pci-sysfs: use proper file capability helper function"). Thus, the two interfaces check the same capability against different credentials. Checking the credentials of the task calling re

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Manage teardown with devm arm_smmu_device_remove() manually frees the ICVE-2026-93205 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Manage teardown with devm arm_smmu_device_remove() manually frees the IOPF queue, destroys the vmid_map and disables the device, while the IRQs and queues are devm managed. devm unwinds only after remove() returns, so the cleanup runs in the wrong order. The IOPF queue is freed before the event-queue IRQ whose handler uses it. Manage all of it with devm so the unwind order is correct. Free the IOPF queue and vmid_map via devm actions, and disable the device from one registered after arm_smmu_device_reset(). This is also a prerequisite for fixing a Tegra241 CMDQV CMD_SYNC use-after-free in the subsequent patch.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: atomically update mac addresses When a MAC address is updated in batadv_dCVE-2026-93204 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: batman-adv: dat: atomically update mac addresses When a MAC address is updated in batadv_dat_entry_add(), it is done using a simple copy function. A parallel reader might only see parts of this update. In worst case, the reader is transporting the half updated MAC address over the network or is creating an ARP response using it - poisoning the ARP cache. atomic64_t can be used to store the 48 bit of a mac address. A reader will then either see the old mac address or the new one - never a mixture of both.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid CRC corruption due to parallel claim add batadv_bla_add_claim() is CVE-2026-93203 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: avoid CRC corruption due to parallel claim add batadv_bla_add_claim() is used to add claims and modify the backbone of claims for CLAIM frames from remote backbones and local packets. When it handles a claim, it needs to either * add the new claim's CRC to the backbone CRC * remove the already existing claim's CRC from the old backbone and add it to the new backbone But when the "new" claim code was running in parallel to the "change backbone" code, it can happen that the CRC was invalid because the backbone_gw of the claim was changed twice in the "new" claim code path: * CPU0 creates the claim for gateway A and publishes it in the claim hash. The crc16 of the address has not yet been added to A's crc at this point. * CPU1 processes a claim frame of gateway B for the same client, finds the just published claim, and performs the ownership change: it switches the pointer to B, removes the crc16 from A's crc - which never contained it - and adds it to B's crc. * CPU0 continues behind the creation branch, unconditionally switches the pointer back to A without compensating B's crc

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix recursive locking during device registration i3c_master_register_new_i3c_CVE-2026-93202 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix recursive locking during device registration i3c_master_register_new_i3c_devs() registers newly discovered devices while holding i3c_bus_normaluse_lock(), a down_read(). device_register() can immediately probe the device, and probe callbacks typically invoke I3C helpers that take i3c_bus_normaluse_lock() again, leading to a recursive acquisition of the same rwsem. rwsems do not support recursive read locking and can deadlock when a writer is waiting. See the "Recursive read locks" section of Documentation/locking/lockdep-design.rst. For example, with Intel LPSS I3C, LOCKDEP generates a WARNING like: # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/unbind # echo intel-lpss-i3c.0 > /sys/bus/platform/drivers/mipi-i3c-hci/bind WARNING: possible recursive locking detected kworker/5:1/94 is trying to acquire lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_device_match_id+0x45/0x370 but task is already holding lock: ffff88811c810d78 (&i3cbus->lock){++++}-{4:4}, at: i3c_master_reg_work_fn+0x21/0x5f0 Fix this by separating device creation from device registra

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate seg_id fields from persistent memory cache_pos_decode(), cache_key_decCVE-2026-93201 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate seg_id fields from persistent memory cache_pos_decode(), cache_key_decode() and the last-kset branches of cache_replay(), the writeback worker and the GC worker take a cache segment id from the cache device metadata and index cache->segments[] with it without checking it against cache->n_segs. That metadata is only CRC-protected with a fixed public seed, so whoever supplies the cache device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range value forms a wild pcache_cache_segment pointer that is dereferenced and written through -- an out-of-bounds read and write driven by on-disk data. Add cache_seg_id_valid() and reject an out-of-range id at each decode site, failing the operation with -EIO instead of indexing past the array. Bound the id against the initialized-segment count (cache_info.n_segs) rather than the physical device total. A forged cache_info.n_segs below seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed structs whose data pointer is NULL, so a forged id in that window would still be dereferenced. A later patch guarantees cache_info.n_segs <= se

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix use-after-free of master->this sysfs attribute callbacks for the master cCVE-2026-93200 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix use-after-free of master->this sysfs attribute callbacks for the master controller device dereference master->this. However, master->this is freed in i3c_master_detach_free_devs() before the master device itself is released. As a result, sysfs accesses can dereference a freed master->this pointer, leading to a use-after-free. Keep master->this alive until i3c_masterdev_release(), which is called after the master device and its sysfs state are being torn down. Do not free master->this as part of the normal device detach path. On the error path in i3c_master_set_info(), reset master->this and bus.cur_master to NULL before freeing the allocated device.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: i3c: master: Do not treat master device as a duplicate target i3c_master_search_i3c_dev_duCVE-2026-93199 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: i3c: master: Do not treat master device as a duplicate target i3c_master_search_i3c_dev_duplicate() searches the bus for another I3C device with the same PID as the reference device. The search can match master->this, causing the controller itself to be returned as a duplicate. Since the controller is not a target device, it cannot be a duplicate of one. Exclude master->this from matching so that the function only returns real duplicate target devices.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate the persisted dirty_tail chain at load The writeback worker follows thCVE-2026-93198 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate the persisted dirty_tail chain at load The writeback worker follows the persisted dirty_tail chain, which is decoded from the cache device independently of the key_tail chain that cache_replay() walks and bounds. A crafted image, whose on-media fields are authenticated only by a crc32c with a fixed seed, can aim dirty_tail at a chain of last ksets that never terminates, so cache_writeback_fn() re-arms itself with no delay forever. Walk the dirty_tail chain once at load with the same hop cap cache_replay() uses and fail the table load with -EIO if it does not reach an end within n_segs hops.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: memcg: move LRU size accounting on reparenting instead of copying it When a memory cgroup CVE-2026-93197 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: memcg: move LRU size accounting on reparenting instead of copying it When a memory cgroup is offlined its LRU folios are reparented to the parent. lruvec_reparent_lru() splices the child's lists into the parent's and credits the parent with the child's per-zone lru_zone_size[], but never clears the child's copy, so the size is copied rather than moved. lru_gen_reparent_memcg() does the same for MGLRU. The parent is left correct, credited with exactly the folios it took over. The stale value sits on the child and nothing will correct it: folio->memcg_data now resolves to the parent, so every later update_lru_size() for those folios goes there. Dying cgroups are not freed immediately and mem_cgroup_iter() still walks them, so shrink_lruvec() keeps being called on them. get_scan_count() reads the phantom counter through lruvec_lru_size() and the scan loop then grinds through nr[] in SWAP_CLUSTER_MAX steps against an empty list, for as long as the dead cgroup lives. Under MGLRU the MGLRU scanner runs instead, but count_shadow_nodes() sums all of NR_LRU_LISTS through lruvec_lru_size() and over-budgets the shadow

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: nvdimm: virtio_pmem: refcount requests for token lifetime KASAN reports slab-use-after-freCVE-2026-93196 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: nvdimm: virtio_pmem: refcount requests for token lifetime KASAN reports slab-use-after-free in __wake_up_common(): BUG: KASAN: slab-use-after-free in __wake_up_common+0x114/0x160 Read of size 8 at addr ffff88810fdcb710 by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.19.0-next-20260220-00006-g1eae5f204ec3 #4 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x6d/0xb0 print_report+0x170/0x4e2 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __virt_addr_valid+0x1dc/0x380 kasan_report+0xbc/0xf0 ? __wake_up_common+0x114/0x160 ? __wake_up_common+0x114/0x160 __wake_up_common+0x114/0x160 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 __wake_up+0x36/0x60 virtio_pmem_host_ack+0x11d/0x3b0 ? sched_balance_domains+0x29f/0xb00 ? __pfx_virtio_pmem_host_ack+0x10/0x10 ? _raw_spin_lock_irqsave+0x98/0x100 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 vring_interrupt+0x1c9/0x5e0 ? __pfx_vp_interrupt+0x10/0x10 vp_vring_interrupt+0x87/0x100 ? __pfx_vp_interrupt+0x10/0x10 __handle_irq_event_percpu+0x17f/0x550 ? __pfx__

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/bridge: synopsys: dw-dp: Support unregistering the AUX channel The DisplayPort AUX chaCVE-2026-93195 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/bridge: synopsys: dw-dp: Support unregistering the AUX channel The DisplayPort AUX channel gets initialized and registered during dw_dp_bind(), but it is never unregistered, which may lead to resource leaks and/or use-after-free. Add the missing dw_dp_unbind() function to allow the users of the library to handle the required cleanup, i.e. unregister the AUX adapter.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Release core resources Core resources such as the DisplayPort AUX chaCVE-2026-93194 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: dw_dp: Release core resources Core resources such as the DisplayPort AUX channel get initialized and registered during dw_dp_bind(), but are never unregistered, which may lead to memory leaks and/or use-after-free: [ 224.661371] BUG: KASAN: slab-use-after-free in device_is_dependent+0xe0/0x2b0 [ 224.662015] Read of size 8 at addr ffff00011aee8550 by task modprobe/658 [ 224.662612] [ 224.662752] CPU: 7 UID: 0 PID: 658 Comm: modprobe Not tainted 7.0.0-rc2-next-20260305 #14 PREEMPT [ 224.662759] Hardware name: Radxa ROCK 5B (DT) [ 224.662762] Call trace: [ 224.662764] show_stack+0x20/0x38 (C) [ 224.662772] dump_stack_lvl+0x6c/0x98 [ 224.662777] print_report+0x160/0x4b8 [ 224.662783] kasan_report+0xb4/0xe0 [ 224.662790] __asan_report_load8_noabort+0x20/0x30 [ 224.662796] device_is_dependent+0xe0/0x2b0 [ 224.662802] device_is_dependent+0x108/0x2b0 [ 224.662808] device_link_add+0x1f8/0x10b0 [ 224.662813] devm_of_phy_get_by_index+0x120/0x200 [ 224.662819] dw_dp_bind+0x34c/0xb10 [dw_dp] [ 224.662830] dw_dp_rockchip_bind+0x194/0x250 [rockchipdrm] [ 224.662864] component_bind_al

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: analogix_dp: Fix OF node reference leak via auto cleanup Sashiko reported a CVE-2026-93193 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: analogix_dp: Fix OF node reference leak via auto cleanup Sashiko reported a reference leak in rockchip_dp_drm_encoder_enable(), the of_get_child_by_name() function does not call of_node_put() in a symmetrical way [1]. Fix the device node reference leak by using __free(device_node) to automatically manage of_node_put() for all device nodes.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Clear queue->active_job when v3d_fence_create() fails The run_job() callbacks forCVE-2026-93192 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Clear queue->active_job when v3d_fence_create() fails The run_job() callbacks for BIN, RENDER, TFU and CSD assign the incoming job to queue->active_job before calling v3d_fence_create(). If v3d_fence_create() fails, the callback returns NULL without clearing active_job, leaving a dangling pointer. Create a failure path in all run_job() callbacks that clears the active job before returning NULL. The BIN path takes queue->queue_lock around the clear as it races against v3d_overflow_mem_work(); RENDER, TFU and CSD paths have no concurrent reader, so the clear is lock-free.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: smack: fix incorrect task context in smack_msg_queue_msgrcv The smack_msg_queue_msgrcv() fCVE-2026-93191 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: smack: fix incorrect task context in smack_msg_queue_msgrcv The smack_msg_queue_msgrcv() function incorrectly checks the permissions of the 'current' task instead of the 'target' task. In the msgsnd() syscall path, if a receiver is already waiting, the pipelined_send() optimization is used to push the message directly to the receiver task: ipc/msg.c`pipelined_send(): ` smp_store_release(&msr->r_msg, msg) In this case, the 'sender' (current) task performs the check on behalf of the 'receiver' task (msr->r_tsk, passed as the 'target' parameter): ipc/msg.c`pipelined_send(): ` security_msg_queue_msgrcv(,, target := msr->r_tsk,,) However, smack_msg_queue_msgrcv() ignores the 'target' and checks 'current': smack_msg_queue_msgrcv(…) ` smk_curacc_msq(isp, MAY_READWRITE); // current task 'current' MAY satisfy smack_msg_queue_msgrcv r/w requirement, but 'target' (the receiver task) might NOT; as a result, an unauthorized receiver gets the message, violating MAC policy. Test: 1) create a sysv message queue with label “foo” 2) echo "bar foo r" >/smack/load2 3) msgrcv(,,,0,MSG_NOERROR) in "bar"-labeled

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_typec: Reject out-of-bounds PD cap count cros_typec_register_partCVE-2026-93190 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_typec: Reject out-of-bounds PD cap count cros_typec_register_partner_pdos() copies the partner PDOs from the EC TYPEC_STATUS response into the fixed caps_desc.pdo[PDO_MAX_OBJECTS] array. memcpy(caps_desc.pdo, resp->source_cap_pdos, sizeof(u32) * resp->source_cap_count); ... memcpy(caps_desc.pdo, resp->sink_cap_pdos, sizeof(u32) * resp->sink_cap_count); PDO_MAX_OBJECTS is 7. source_cap_count and sink_cap_count are u8 fields from the EC. The only check is that they are not both zero. If either is larger than 7, the memcpy writes past the end of the array on the stack. A count of 255 overflows it by about 1 KB. The EC source arrays are only seven entries wide. A larger count reads past them too. The ChromeOS EC firmware caps these counts today, so a compliant setup does not hit this. The kernel should still validate these values rather than trust them. Validate the counts in cros_typec_register_partner_pdos() next to the memcpy. Skip the PDO registration if either count is above PDO_MAX_OBJECTS. The rest of cros_typec_handle_status() still runs so events are handled an

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: HID: core: quiesce input in hid_hw_stop() to prevent use-after-free A driver's probe callsCVE-2026-93189 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: HID: core: quiesce input in hid_hw_stop() to prevent use-after-free A driver's probe calls hid_device_io_start() to enable input delivery, then fails at a later initialization step and unwinds via hid_hw_stop(). The unwind frees struct hidraw via hidraw_disconnect() while in-flight HID reports may still be running on another CPU, dereferencing the freed object through hidraw_report_event(). syzbot reports the resulting use-after-free for the corsair-psu HID driver. Edward Adam Davis posted a per-driver fix for corsair-psu that adds an explicit hid_device_io_stop() before hid_hw_stop() in the probe error path ("hwmon: prevent packets from going to driver for probe", 2026-04-28). Auditing the tree shows 15 drivers call hid_device_io_start(); 7 also call hid_device_io_stop() and 8 do not: drivers calling hid_device_io_start() without a matching hid_device_io_stop() before hid_hw_stop(): drivers/hwmon/corsair-psu.c (fix posted by Edward) drivers/hwmon/corsair-cpro.c drivers/hwmon/nzxt-kraken3.c drivers/hwmon/nzxt-smart2.c drivers/hwmon/gigabyte_waterforce.c drivers/hid/hid-logitech

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: HID: roccat: bound device-supplied profile index kone_keep_values_up_to_date() and kone_prCVE-2026-93188 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: HID: roccat: bound device-supplied profile index kone_keep_values_up_to_date() and kone_profile_activated() use an 8-bit, device-supplied profile value as an index into the 5-element kone->profiles[] array without a range check. A malicious USB device claiming the Roccat Kone id can send a switch-profile event (or a startup_profile read at probe) with an out-of-range value and make the driver read out of bounds; the result is exposed via the actual_dpi sysfs attribute. Reject out-of-range indices in both paths. This was found with static analysis and confirmed with the KUnit test added in the following patch (KASAN: slab-out-of-bounds).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Return error for invalid number of formats When the number of inCVE-2026-93187 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Return error for invalid number of formats When the number of input or output formats is zero, sof_ipc4_widget_setup_comp_src() and sof_ipc4_widget_setup_comp_asrc() print an error and jump to the cleanup label. At that point 'ret' is still 0, because the earlier sof_ipc4_get_audio_fmt() call succeeded, so the function returns success and the caller never finds out that the widget setup actually failed. Set ret to -EINVAL before the goto so the error gets reported.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: cxl/mbox: Clamp mailbox output allocation to the payload size CXL_MEM_SEND_COMMAND bounds CVE-2026-93186 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: cxl/mbox: Clamp mailbox output allocation to the payload size CXL_MEM_SEND_COMMAND bounds the user's in.size to the mailbox payload size but leaves out.size unbounded, then cxl_mbox_cmd_ctor() calls kvzalloc(out.size). A large out.size drives a huge allocation, above INT_MAX it WARNs and taints, and with panic_on_warn=1 it panics. The transport __cxl_pci_mbox_send_cmd() already clamps the response copy to min(out.size, payload_size, device len), so the output buffer is never written beyond payload_size. Clamp the allocation to payload_size too, matching the RAW path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: rt700-sdw: always drain jack work on remove rt700_sdw_remove() drains jack_detect_woCVE-2026-93185 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ASoC: rt700-sdw: always drain jack work on remove rt700_sdw_remove() drains jack_detect_work and jack_btn_check_work only when rt700->hw_init is true. That state bit is cleared by rt700_update_status() when the SoundWire slave becomes UNATTACHED, but a jack work item can already have been queued by rt700_interrupt_callback() or rt700_jack_init() while the device was initialized. Do not use hw_init as the remove-time guard for draining these work objects. The delayed works are initialized during rt700_init(), so remove can cancel them unconditionally and pair the object lifetime with the codec-private data lifetime instead of a mutable hardware state bit. This issue was found by our static analysis tool and then confirmed by manual review of the SoundWire status, interrupt and remove paths. The remove path should drain work based on whether the work object exists, not on a runtime hardware state bit that can change after the work was queued. A QEMU PoC queued jack_detect_work, simulated SDW_SLAVE_UNATTACHED, and then entered remove. DEBUG_OBJECTS reported an active timer/work object associated with the rt700 ja

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_audmix: rework runtime PM handling in probe After pm_runtime_enable() the AUDMIXCVE-2026-93184 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_audmix: rework runtime PM handling in probe After pm_runtime_enable() the AUDMIX block is powered off and stays suspended until the first runtime resume. Register writes issued between probe() and the first resume (e.g. from DAPM or ALSA control paths) target unpowered hardware and cause a system hang. Fix this by calling pm_runtime_resume_and_get() immediately after pm_runtime_enable() to power the hardware up and enable its clocks. Release the reference afterwards with pm_runtime_put() to allow the runtime PM framework to suspend the device and switch the regmap to cache-only mode when idle. When CONFIG_PM is disabled or runtime PM is not enabled, pm_runtime_* calls are stubs that do not power up the hardware. Handle this case explicitly by calling fsl_audmix_runtime_resume() directly so the hardware is always initialised and its clocks are enabled, ensuring register accesses succeed regardless of PM configuration.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/lima: call drm_mm_init() with a valid allocation range lima_vm_create() is currently rCVE-2026-93183 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/lima: call drm_mm_init() with a valid allocation range lima_vm_create() is currently run before va_start and va_end are set up, meaning they are both 0. lima_vm_create() runs drm_mm_init() with them as arguments for the allocator, and if DRM_DEBUG_MM is enabled the DRM_MM_BUG_ON check in drm_mm_init then fires, as seen here on exynos4412-odroid-u2: [ 1.736297] ------------[ cut here ]------------ [ 1.740370] kernel BUG at drivers/gpu/drm/drm_mm.c:931! [ 1.745574] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 1.750697] Modules linked in: [ 1.753734] CPU: 0 UID: 0 PID: 41 Comm: kworker/u16:1 Not tainted 7.0.10-postmarketos-exynos4 #11 PREEMPT [ 1.763372] Hardware name: Samsung Exynos (Flattened Device Tree) [ 1.769446] Workqueue: events_unbound deferred_probe_work_func [ 1.775261] PC is at drm_mm_init+0x9c/0xa4 [ 1.779339] LR is at lima_vm_create+0x144/0x17c [ ... ] Fix the issue by moving the lima_vm_create() call after va_start and va_end are set up.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix overflow in update_tg_cfs_runnable() A divide-by-zero crash is observed whCVE-2026-93182 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix overflow in update_tg_cfs_runnable() A divide-by-zero crash is observed when running hackbench: [14697.488452] CPU: 112 UID: 0 PID: 124791 Comm: hackbench Not tainted 7.1.0-rc2+ [14697.492627] RIP: 0010:propagate_entity_load_avg+0x35f/0x3e0 [14697.506799] <TASK> [14697.507411] __dequeue_task+0x2b4/0xc70 [14697.508677] dequeue_task_fair+0x36/0x370 [14697.509047] dequeue_task+0x101/0x2f0 [14697.509426] __schedule+0x1b1/0x1a00 [14697.510868] anon_pipe_read+0x3da/0x450 [14697.511400] vfs_read+0x361/0x390 [14697.512053] __x64_sys_read+0x19/0x30 The divide-by-zero happens here: if (scale_load_down(gcfs_rq->load.weight)) { load_sum = div_u64(gcfs_rq->avg.load_sum, scale_load_down(gcfs_rq->load.weight)); } gcfs_rq->load.weight is an insane large value and is truncated to the lower 32 bits by div_u64, which happen to be 0. Using AI for investigation, the cause is a u32 overflow in update_tg_cfs_runnable(), and flat pickup became a victim when using tg_tasks(): u32 new_sum, divider; ... new_sum = se->avg.runnab

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix uncore_box ref/unref ordering In uncore_event_cpu_online(), uncCVE-2026-93181 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Fix uncore_box ref/unref ordering In uncore_event_cpu_online(), uncore_box_ref() was called before uncore_change_context(). uncore_box_ref() gates on box->cpu >= 0, but box->cpu is still -1 at that point because uncore_change_context() has not run yet. As a result, the box is never initialized on the first CPU to come online in a die, leaving it permanently uninitialized in the single-CPU-per-die case. Thus, box->refcnt is one count below the true value, and in the CPU offline path, the box will be torn down on the second-to-last CPU. In uncore_event_cpu_offline(), uncore_box_unref() was called after uncore_change_context(), so box->cpu is already -1 when the collector CPU goes offline, which prevents it from tearing down the box. Fix by swapping the call order in both paths so that uncore_box_{ref,unref}() runs at the point where box->cpu reflects the correct context. Move allocate_boxes() out of uncore_box_ref() to enable this reordering.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix NPD issue on partial unmap of an evicted BO This commit fixes the NULL poCVE-2026-93180 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix NPD issue on partial unmap of an evicted BO This commit fixes the NULL pointer dereference issue that would have happened on the split of GPU mapping due to partial unmap of an evicted BO. There is a logic to handle the partial unmap of huge pages when the GPU mapping is split. That logic was not being completely skipped for the VMA of an evicted BO and that resulted in a NPD possibility for the 'bo->backing.pages' pointer, which is set to NULL when pages of a BO are released on eviction. Following dump was seen when a partial unmap was exercised for an evicted BO. Unable to handle kernel paging request at virtual address 0000000000002000 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000008842e8000 [0000000000002000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 00000

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read Reject voltage objeCVE-2026-93179 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amd/powerplay: fix VoltageObjectInfo zero-stride loop and OOB read Reject voltage objects whose usSize is smaller than the header or would advance the cursor past the table end, preventing an infinite loop or heap OOB read when the VBIOS supplies a malformed VoltageObjectInfo table.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm/powerplay: bounds-check voltage index in SMU7 lookup vddInd and vddcInd fielCVE-2026-93178 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm/powerplay: bounds-check voltage index in SMU7 lookup vddInd and vddcInd fields from VBIOS-parsed tables are used to index into voltage lookup tables without a bounds check. Return -EINVAL when any index is out of range.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm/powerplay: bounds-check voltage index in Vega10 lookup vddInd, vddciInd and CVE-2026-93177 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.3

  In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm/powerplay: bounds-check voltage index in Vega10 lookup vddInd, vddciInd and mvddInd from VBIOS-parsed tables index into vddc, vddci and vddmem lookup tables without bounds checks across nine sites. Return -EINVAL when any index is out of range.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dangling pointer in plane reset function amdgpu_dm_plane_drm_plane_reCVE-2026-93176 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dangling pointer in plane reset function amdgpu_dm_plane_drm_plane_reset() frees the old state before allocating a new one. If kzalloc() fails, the function returns without updating the state pointer, leaving a dangling pointer to already freed memory. Fix this by allocating the new state first. On allocation failure, the old state remains untouched and the function safely returns. Found by Linux Verification Center (linuxtesting.org) with SVACE. [adjust for movement around current amd-staging-drm-next]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dangling pointer in CRTC reset function amdgpu_dm_crtc_reset_state() CVE-2026-93175 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dangling pointer in CRTC reset function amdgpu_dm_crtc_reset_state() frees the old state before allocating a new one. If kzalloc() fails, the function returns without updating the state pointer, leaving a dangling pointer to already freed memory. Fix this by allocating the new state first. On allocation failure, the old state remains untouched and the function safely returns. Found by Linux Verification Center (linuxtesting.org) with SVACE. [adjust for movement around current amd-staging-drm-next]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Copy per-CPU map value padding in copy_map_value_long() In kernel, per-CPU map elemenCVE-2026-93174 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Copy per-CPU map value padding in copy_map_value_long() In kernel, per-CPU map elements are stored with round_up(map->value_size, 8) bytes. On UAPI lookup paths, it copies the rounded size for each CPU into a temporary buffer. However, copy_map_value_long() passes 'map->value_size' to bpf_obj_memcpy(). When the map has special fields, bpf_obj_memcpy() copies around those fields with memcpy(), and does not copy the tail padding between 'map->value_size' and round_up(map->value_size, 8). The temporary UAPI lookup buffers are allocated without __GFP_ZERO. As a result, when the per-CPU map's value size is not equal to round_up(map->value_size, 8), UAPI LOOKUP_ELEM and its variants can return stale heap contents from that padding to user space. The same issue applies to bpf_iter for per-CPU maps. Pass round_up(map->value_size, 8) to bpf_obj_memcpy() from copy_map_value_long(), so per-CPU maps both with and without special fields copy the entire per-CPU slot. Remove the now redundant round_up() from bpf_obj_memcpy()'s long_memcpy path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf,lsm: Drop bpf_prog_free from sleepable_lsm_hooks __bpf_prog_put_rcu() is the call_rcu(CVE-2026-93173 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf,lsm: Drop bpf_prog_free from sleepable_lsm_hooks __bpf_prog_put_rcu() is the call_rcu() callback for non-sleepable programs. security_bpf_prog_free() called from there fires bpf_prog_free in softirq; if a sleepable LSM prog is attached to that hook, might_fault() BUGs: BUG: sleeping function called from invalid context in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 5038 preempt_count: 101, expected: 0 Call Trace: <IRQ> __bpf_prog_enter_sleepable+0x1cd/0x320 kernel/bpf/trampoline.c:1255 bpf_trampoline_6442549705+0x53/0xd7 security_bpf_prog_free+0xde/0x130 security/security.c:5465 __bpf_prog_put_rcu+0xab/0xd0 kernel/bpf/syscall.c:2365 rcu_do_batch kernel/rcu/tree.c:2617 [inline] handle_softirqs+0x236/0x800 kernel/softirq.c:622 </IRQ> The call_rcu/call_rcu_tasks_trace split reflects the freed program's sleepability, not that of any attached observer. security_bpf_prog_free() also frees prog->aux->security, which has to stay after the grace period, so drop bpf_prog_free from sleepable_lsm_hooks rather than move the call. Non-sleepable observers still run there.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug We miss a failed alCVE-2026-93172 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm/mm_init: handle alloc_percpu failure in free_area_init_core_hotplug We miss a failed allocation check for pgdat->per_cpu_nodestats, which results in a NULL deref when we offset into the per-cpu area. Propagate -ENOMEM up the stack and leave per_cpu_nodestats pointing at boot_nodestats so a later online can retry the allocation. hotadd_init_pgdat() returns NULL on failure, which __try_online_node() already maps to -ENOMEM. On failure nothing needs to be unwound: - the node is never marked online - per_cpu_nodestats is left pointing at boot_nodestats - __add_memory_resource() cleans up pending memblock resources - later online attempts retry the per_cpu_nodestats allocation

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: leds: lp5860: Fix a potential double-unlock In lp5860_device_init(), if lp5860_init_dt() fCVE-2026-93171 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: leds: lp5860: Fix a potential double-unlock In lp5860_device_init(), if lp5860_init_dt() fails, an already unlocked mutex is unlocked another time. Slightly rework how the lock is taken/released to avoid this potential double unlock.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handCVE-2026-93170 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx_dma: Fix channel idle state management in AXIDMA and MCDMA interrupt handlers Fix a race condition in AXIDMA and MCDMA irq handlers where the channel could be incorrectly marked as idle and attempt spurious transfers when descriptors are still being processed. The issue occurs when: 1. Multiple descriptors are queued and active. 2. An interrupt fires after completing some descriptors. 3. xilinx_dma_complete_descriptor() moves completed descriptors to done_list. 4. Channel is marked idle and start_transfer() is called even though active_list still contains unprocessed descriptors. 5. This leads to premature transfer attempts and potential descriptor corruption or missed completions. Only mark the channel as idle and start new transfers when the active list is actually empty, ensuring proper channel state management and avoiding spurious transfer attempts.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: zynqmp_dma: fix race between runtime PM and device removal In zynqmp_dma_removeCVE-2026-93169 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: zynqmp_dma: fix race between runtime PM and device removal In zynqmp_dma_remove(), runtime PM was disabled only after checking state and doing a manual suspend. This can race with runtime PM in the remove/unbind (rmmod) path. Disable runtime PM first, then suspend only if the device is not already suspended. To prevent any further runtime PM transitions.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout Currently when calling xilCVE-2026-93168 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a condition that is never fulfilled, the CPU busy-waits for prolonged time and the timeout triggers only with a massive delay causing a CPU stall. This happens due to a huge underestimation of wall clock time in poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use timekeeping in read_poll_timeout_atomic()") changed the behavior to no longer use ktime_get at the expense of underestimation of wall clock time which appears to be very large for delay_us=0. Instead of timing out after approximately XILINX_DMA_LOOP_COUNT microseconds, the timeout takes XILINX_DMA_LOOP_COUNT * 1000 * (time that the overhead of the for loop in poll_timeout_us_atomic takes) which is in the range of several minutes for XILINX_DMA_LOOP_COUNT=1000000. Fix this by using a non-zero value for delay_us. Use delay_us=10 to keep the delay in the hot path of starting DMA transfers minimal but still avoid CPU stalls in case of unexpected hardware failures. One-off measurement with delay_us=0 causes the cpu

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: csky: Fix a4/a5 restoration in syscall trace path The syscall trace path reloads syscall aCVE-2026-93167 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: csky: Fix a4/a5 restoration in syscall trace path The syscall trace path reloads syscall arguments from pt_regs before calling the syscall handler. On C-SKY ABIv2, the 5th and 6th syscall arguments are prepared as stack arguments before invoking syscallid. The current code adjusts sp before loading LSAVE_A4 and LSAVE_A5. Since those offsets are relative to the original pt_regs base, loading them after changing sp fetches the wrong slots. As a result, traced syscalls that use the 5th or 6th argument may receive corrupted arguments. This is visible with mmap2(), which takes six arguments. A small PTRACE_SYSCALL reproducer opens a file and maps one page with: mmap(NULL, 4096, PROT_READ | PROT_EXEC, MAP_PRIVATE, fd, 0) Before the fix, the traced child fails the mmap and exits with 12. After the fix, the mapping succeeds and the child exits with 0. Fix the trace path by loading a4/a5 from pt_regs before changing sp. Tested on: ck860f, linux-4.19.15, C-SKY abiv2

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: debug: fix off by on in rtw89_ppdu_str() This > comparison should be >= to avCVE-2026-93166 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: debug: fix off by on in rtw89_ppdu_str() This > comparison should be >= to avoid an out of bounds access.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Fix memory overread in ring handler `max_response` and `sensorCVE-2026-93165 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.7

  In the Linux kernel, the following vulnerability has been resolved: platform/chrome: sensorhub: Fix memory overread in ring handler `max_response` and `sensor_num` are read from different EC commands: - `max_response` is from cros_ec_get_proto_info(). ec_dev->max_response = info->max_response_packet_size - sizeof(struct ec_host_response); - `sensor_num` is from cros_ec_get_sensor_count(). sensor_num = cros_ec_get_sensor_count(ec); With a malfunctioning EC firmware, it is possible that the `msg->insize` (i.e., `fifo_info_length` in the context) could be clamped in cros_ec_cmd_xfer() because `msg->insize` is greater than `max_response`. int fifo_info_length = sizeof(struct ec_response_motion_sense_fifo_info) + sizeof(u16) * sensorhub->sensor_num; This means the number of read bytes could be less than expected. As a result, the subsequent memcpy() in cros_ec_sensorhub_ring_handler() overreads the `resp->fifo_info` buffer. Check the return value of cros_ec_cmd_xfer_status() and abort if the number of bytes read does not match the expected length.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.