Updated 5 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,762exploited flaws on CISA’s list

34added in the last 30 days

344new WordPress flaws this week

390,080entries in the database

668 results · page 3 of 14

Jun 27, 2026RustDesk gates incoming control messages on per-capability flags rather than on the session's authorized connection type, and a file-transfer session does not cCVE-2026-58056 · Other software · RustDesk · reported by VulnCheckHigh 7.2
RustDesk gates incoming control messages on per-capability flags rather than on the session's authorized connection type, and a file-transfer session does not clear those flags. A peer holding only a valid FileTransfer authorization can inject keyboard and mouse input and reach the unguarded screenshot and display-capture handlers, acting outside its granted scope.
Product
RustDesk
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com vulncheck.com
Jun 27, 2026The ELF image activator cleared per-process ASLR preference flags for setuid binaries after the code that computes the PIE base address, rather than before.CVE-2026-49414 · Other software · FreeBSD · reported by secteam@freebsd.orgHigh 7.8
The ELF image activator cleared per-process ASLR preference flags for setuid binaries after the code that computes the PIE base address, rather than before. As a result, a user-requested ASLR disable was still in effect at the point where the base address was chosen. An unprivileged local user can disable ASLR for a setuid PIE binary by calling procctl(2) before execve(2). This makes exploitation of any separate memory corruption vulnerability in that binary significantly easier.
Product
FreeBSD
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record security.freebsd.org
Jun 27, 2026The Linuxulator determined whether a binary was set-user-ID or set-group-ID by checking the P_SUGID process flag.CVE-2026-49413 · Other software · FreeBSD · reported by secteam@freebsd.orgHigh 7.1
The Linuxulator determined whether a binary was set-user-ID or set-group-ID by checking the P_SUGID process flag. During execve(2), this flag is not yet set at the point where the auxiliary vector is constructed, so AT_SECURE was incorrectly set to zero for set-user-ID and set-group-ID executables. An unprivileged local user can inject a shared library via LD_PRELOAD into a set-user-ID or set-group-ID Linux binary, gaining the privileges of that binary.
Product
FreeBSD
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record security.freebsd.org
Jun 26, 2026The HCL Traveler for Microsoft Outlook libraries are being flagged as potentially malicious software or an unrecognized application.CVE-2024-23581 · Other software · HCLSoftware · reported by psirt@hcl.comMedium 6.7
The HCL Traveler for Microsoft Outlook libraries are being flagged as potentially malicious software or an unrecognized application.
Product
Traveler for Microsoft Outlook
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record support.hcl-software.com
Jun 25, 2026In the Linux kernel, the following vulnerability has been resolved: netdev: fix double-free in netdev_nl_bind_rx_doit() Sashiko flags that genlmsg_reply() alwCVE-2026-53233 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: netdev: fix double-free in netdev_nl_bind_rx_doit() Sashiko flags that genlmsg_reply() always consumes the skb. The error path calls nlmsg_free(rsp) so we can't jump directly to it. Let's not unbind, just propagate the error to the user. This is the typical way of handling genlmsg_reply() failures. They shouldn't happen unless user does something silly like calling the kernel with an already-full rcvbuf.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Jun 25, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_exthdr: fix register tracking for F_PRESENT flag nft_exthdr_init() passes uCVE-2026-53218 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_exthdr: fix register tracking for F_PRESENT flag nft_exthdr_init() passes user-controlled priv->len to nft_parse_register_store(), which marks that many bytes in the register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT is set, the eval paths write only 1 byte (nft_reg_store8) or 4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4, registers beyond the first are never written, retaining uninitialized stack data from nft_regs. Bail out if userspace requests too much data when F_PRESENT is set.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Jun 25, 2026In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: use correct flags for device private PMD entry Commit 65edfda6f3f2 ("mm/rmCVE-2026-53155 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: use correct flags for device private PMD entry Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support device-private entries") updated set_pmd_migration_entry() to use pmdp_huge_get_and_clear() in the softleaf case, but made no further adjustments to the function itself. Therefore this function continues to incorrectly use pmd_write(), pmd_soft_dirty() and pmd_uffd_wp() to determine whether the installed migration entry should be marked writable, softdirty or uffd-wp respectively. Whilst all are incorrect, the most problematic of these is pmd_write(), as this can lead to corrupted rmap state. On x86-64 _PAGE_SWP_SOFT_DIRTY is aliased to _PAGE_RW. So calling pmd_write() on a softleaf will return the softdirty state encoded in the entry, assuming CONFIG_MEM_SOFT_DIRTY was enabled. This was observed when running the hmm.hmm_device_private.anon_write_child selftest: 1. The test faults in a range then migrates it such that a device-private THP range is established. 2. The parent then migrates it to a device-private writable PMD entry whose folio is entirely AnonExclusive with ent
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Jun 24, 2026In the Linux kernel, the following vulnerability has been resolved: ublk: reset per-IO canceled flag on each fetch If a ublk server starts recovering devices CVE-2026-53124 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: ublk: reset per-IO canceled flag on each fetch If a ublk server starts recovering devices but dies before issuing fetch commands for all IOs, cancellation of the fetch commands that were successfully issued may never complete. This is because the per-IO canceled flag can remain set even after the fetch for that IO has been submitted - the per-IO canceled flags for all IOs in a queue are reset together only once all IOs for that queue have been fetched. So if a nonempty proper subset of the IOs for a queue are fetched when the ublk server dies, the IOs in that subset will never successfully be canceled, as their canceled flags remain set, and this prevents ublk_cancel_cmd from actually calling io_uring_cmd_done on the commands, despite the fact that they are outstanding. Fix this by resetting the per-IO cancel flags immediately when each IO is fetched instead of waiting for all IOs for the queue (which may never happen).
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Jun 24, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: fix data loss caused by incorrect use of nat_entry flag Data loss can occur when fsyCVE-2026-53017 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix data loss caused by incorrect use of nat_entry flag Data loss can occur when fsync is performed on a newly created file (before any checkpoint has been written) concurrently with a checkpoint operation. The scenario is as follows: create & write & fsync 'file A' write checkpoint - f2fs_do_sync_file // inline inode - f2fs_write_inode // inode folio is dirty - f2fs_write_checkpoint - f2fs_flush_merged_writes - f2fs_sync_node_pages - f2fs_flush_nat_entries - f2fs_fsync_node_pages // no dirty node - f2fs_need_inode_block_update // return false SPO and lost 'file A' f2fs_flush_nat_entries() sets the IS_CHECKPOINTED and HAS_LAST_FSYNC flags for the nat_entry, but this does not mean that the checkpoint has actually completed successfully. However, f2fs_need_inode_block_update() checks these flags and incorrectly assumes that the checkpoint has finished. The root cause is that the semantics of IS_
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Jun 23, 2026Flowise before 3.1.2 contains multiple OS command injection vulnerabilities in the Custom MCP Server feature due to incomplete command-flag validation and a regCVE-2026-56274 · Other software · Flowise · reported by VulnCheckHigh 8.7
Flowise before 3.1.2 contains multiple OS command injection vulnerabilities in the Custom MCP Server feature due to incomplete command-flag validation and a regex bypass in local file access restrictions. An attacker with a Flowise account of any role, or API access with view/update permissions for chatflows, can configure a malicious MCP server to bypass the validateCommandFlags blocklist (for example, 'docker build' is not blocked, and 'npx --yes' is not blocked while only '-y' is) and the validateArgsForLocalFileAccess checks, resulting in execution of arbitrary commands on the Flowise host.
Product
Flowise
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com vulncheck.com
Jun 22, 2026bt_iso_recv() in subsys/bluetooth/host/iso.c pulled the ISO SDU header (4 bytes) or, when the timestamp flag is set, the timestamped SDU header (8 bytes) from tCVE-2026-10658 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.1
bt_iso_recv() in subsys/bluetooth/host/iso.c pulled the ISO SDU header (4 bytes) or, when the timestamp flag is set, the timestamped SDU header (8 bytes) from the inbound HCI ISO Data buffer via net_buf_pull_mem() without first checking buf->len. The upstream hci_iso() handler enforces buf->len == the controller-declared ISO Data_Load length, so a malicious or buggy controller / adjacent BLE peer on an established CIS/BIS can present a first-fragment (BT_ISO_START) or single (BT_ISO_SINGLE) PDU shorter than the SDU header. Because net_buf_simple_pull_mem only guards length with __ASSERT_NO_MSG (compiled out when CONFIG_ASSERT is disabled, the production default), the pull underflows buf->len (uint16_t, e.g. 0 - 8 = 0xFFF8) and advances buf->data past valid data: the subsequent reads of hdr->slen and hdr->sn are out-of-bounds reads of adjacent pool memory. For the multi-fragment (START) case the corrupted buffer is retained as iso->rx, and a following CONT/END fragment's net_buf_tailroom() guard underflows to a near-SIZE_MAX value, defeating the bounds check and causing net_buf_add_mem() to memcpy attacker-supplied fragment data far past the RX pool buffer (out-of-bounds write). The
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Jun 16, 2026OpenClaw before 2026.5.6 contains an allowlist bypass vulnerability in the macOS Swift exec feature that misses combined POSIX inline-command flags.CVE-2026-53861 · Other software · OpenClaw · reported by VulnCheckMedium 5.3
OpenClaw before 2026.5.6 contains an allowlist bypass vulnerability in the macOS Swift exec feature that misses combined POSIX inline-command flags. Attackers can execute shell content outside the intended allowlist check by using combined flag forms, potentially allowing unauthorized command execution depending on operator configuration.
Product
OpenClaw
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com vulncheck.com
Jun 11, 2026OpenClaw before 2026.5.12 contains a shell option parsing vulnerability that allows combined POSIX shell flags to bypass exec revalidation checks.CVE-2026-53806 · Other software · OpenClaw · reported by VulnCheckHigh 7.7
OpenClaw before 2026.5.12 contains a shell option parsing vulnerability that allows combined POSIX shell flags to bypass exec revalidation checks. Attackers can exploit this by using combined shell options to execute inline shell content without intended allowlist validation, potentially enabling unauthorized command execution when the affected feature is enabled.
Product
OpenClaw
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com vulncheck.com
Jun 11, 2026Wss4jSecurityInterceptor initialized its BSP (WS-I Basic Security Profile) compliance flag so that inbound validation disabled WSS4J BSP enforcement on RequestDCVE-2026-40994 · Other software · Spring · reported by security@vmware.comHigh 8.2
Wss4jSecurityInterceptor initialized its BSP (WS-I Basic Security Profile) compliance flag so that inbound validation disabled WSS4J BSP enforcement on RequestData. Services that validate WS-Security on the network could therefore accept messages that violate BSP rules, weakening protocol-level checks. Affected versions: Spring Web Services 5.0.0 through 5.0.1; 4.1.0 through 4.1.3; 4.0.0 through 4.0.18; 3.1.0 through 3.1.8.
Product
Spring Web Services
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record spring.io
Jun 9, 2026In the Linux kernel, the following vulnerability has been resolved: 9p: fix access mode flags being ORed instead of replaced Since commit 1f3e4142c0eb ("9p: cCVE-2026-52906 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.7
In the Linux kernel, the following vulnerability has been resolved: 9p: fix access mode flags being ORed instead of replaced Since commit 1f3e4142c0eb ("9p: convert to the new mount API"), v9fs_apply_options() applies parsed mount flags with |= onto flags already set by v9fs_session_init(). For 9P2000.L, session_init sets V9FS_ACCESS_CLIENT as the default, so when the user mounts with "access=user", both bits end up set. Access mode checks compare against exact values, so having both bits set matches neither mode. This causes v9fs_fid_lookup() to fall through to the default switch case, using INVALID_UID (nobody/65534) instead of current_fsuid() for all fid lookups. Root is then unable to chown or perform other privileged operations. Fix by clearing the access mask before applying the user's choice.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Jun 8, 2026In the Linux kernel, the following vulnerability has been resolved: media: videobuf2: Set vma_flags in vb2_dma_sg_mmap vb2_dma_contig sets VMA flags VM_DONTEXCVE-2026-46312 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: media: videobuf2: Set vma_flags in vb2_dma_sg_mmap vb2_dma_contig sets VMA flags VM_DONTEXPAND and VM_DONTDUMP and I do not see a reason why vb2_dma_sg should behave differently. This avoids hitting `WARN_ON(!(vma->vm_flags & VM_DONTEXPAND));` in drm_gem_mmap_obj() during mmap() of an imported dma-buf from the out of tree Apple ISP camera capture driver which uses vb2_dma_sg_memops. gst-launch-1.0 v4l2src ! gtk4paintablesink [ 38.201528] ------------[ cut here ]------------ [ 38.202135] WARNING: CPU: 7 PID: 2362 at drivers/gpu/drm/drm_gem.c:1144 drm_gem_mmap_obj+0x1f8/0x210 [ 38.203278] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device uinput nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables qrtr bnep nls_ascii i2c_dev loop fuse dm_multipath nfnetlink brcmfmac_wcc hid_magicmouse hci_bcm4377 brcmfmac brcmutil bluetooth ecdh_generic cfg80211 ecc btrfs xor xor_neon rfkill hid_apple raid6_pq joydev aop_als apple_nvmem_sp
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Jun 8, 2026AdGuard Home, when started with the --glinet flag, contains an authentication bypass vulnerability that allows unauthenticated attackers to gain full admin acceCVE-2026-41448 · Other software · AdguardTeam · reported by VulnCheckCritical 9.2
AdGuard Home, when started with the --glinet flag, contains an authentication bypass vulnerability that allows unauthenticated attackers to gain full admin access by supplying a path traversal sequence in the Admin-Token cookie, exploiting unsanitized string concatenation in the token file path construction within the authglinet middleware. Attackers can craft a request with a traversal payload in the Admin-Token header to redirect file reads to arbitrary paths.
Product
AdGuardHome
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com vulncheck.com
Jun 3, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: fix block_group_tree dirty_list corruption When the incompat flag EXTENT_TREE_V2 isCVE-2026-46251 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix block_group_tree dirty_list corruption When the incompat flag EXTENT_TREE_V2 is set, we unconditionally add the block group tree to the switch_commits list before calling switch_commit_roots, as we do for the tree root and the chunk root. However, the block group tree uses normal root dirty tracking and in any transaction that does an allocation and dirties a block group, the block group root will already be linked to a list by the dirty_list field and this use of list_add_tail() is invalid and corrupts the prev/next members of block_group_root->dirty_list. This is apparent on a subsequent list_del on the prev if we enable CONFIG_DEBUG_LIST: [32.1571] ------------[ cut here ]------------ [32.1572] list_del corruption. next->prev should beffff958890202538, but was ffff9588992bd538. (next=ffff958890201538) [32.1575] WARNING: lib/list_debug.c:65 at 0x0, CPU#3: sync/607 [32.1583] CPU: 3 UID: 0 PID: 607 Comm: sync Not tainted 6.18.0 #24PREEMPT(none) [32.1585] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS1.17.0-4.fc41 04/01/2014 [32.1587] RIP: 0010:__list_del_entry_valid_or_report+0x
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Jun 1, 2026Apache Airflow's `JWTRefreshMiddleware` set the JWT auth cookie without the `Secure` flag, so deployments running the Airflow API server behind an HTTPS-terminaCVE-2026-41017 · Websites & servers · Apache Software Foundation · reported by security@apache.orgMedium 5.9
Apache Airflow's `JWTRefreshMiddleware` set the JWT auth cookie without the `Secure` flag, so deployments running the Airflow API server behind an HTTPS-terminating reverse proxy (e.g. nginx / Envoy / a managed load balancer that terminates TLS and forwards plaintext to the API server, the default cloud-native topology) would have the user's session JWT replayed over any cleartext HTTP request to the same host. A network-positioned attacker (Wi-Fi MITM, hostile LAN, captive-portal proxy) could induce a logged-in user's browser to issue an HTTP request to the deployment's hostname and capture the JWT cookie out of that request, then replay it against the authenticated API. Affects deployments where the Airflow API server is reached through a TLS-terminating proxy and the cookie's secure-by-default protection is load-bearing for session integrity. Users are advised to upgrade to `apache-airflow` 3.2.2 or later.
Product
Apache Airflow
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com lists.apache.org
May 31, 2026An improper default configuration in OTRS 2026.3.1 causes ticket article forwarding actions to enforce the “Is visible for customer” flag by default and preventCVE-2026-48210 · Other software · OTRS AG · reported by security@otrs.comMedium 5.7
An improper default configuration in OTRS 2026.3.1 causes ticket article forwarding actions to enforce the “Is visible for customer” flag by default and prevent users from disabling it via the UI. This leads to unintended exposure of internal ticket information to the External Frontend This issue affects OTRS 2026.3.1
Product
OTRS
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record otrs.com
May 28, 2026In the Linux kernel, the following vulnerability has been resolved: media: rockchip: rkcif: Add missing MUST_CONNECT flag to pads The pads missed checks for cCVE-2026-46222 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: media: rockchip: rkcif: Add missing MUST_CONNECT flag to pads The pads missed checks for connected devices which may a null dereference when the stream is enabled. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 pc : rkcif_interface_enable_streams+0x48/0xf0 lr : rkcif_interface_enable_streams+0x44/0xf0 Call trace: rkcif_interface_enable_streams+0x48/0xf0 v4l2_subdev_enable_streams+0x26c/0x3f0 rkcif_stream_start_streaming+0x140/0x278 vb2_start_streaming+0x74/0x188 vb2_core_streamon+0xe0/0x1d8 vb2_ioctl_streamon+0x60/0xa8 v4l_streamon+0x2c/0x40 __video_do_ioctl+0x34c/0x400 video_usercopy+0x2d0/0x800 video_ioctl2+0x20/0x60 v4l2_ioctl+0x48/0x78
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
May 27, 2026In the Linux kernel, the following vulnerability has been resolved: ublk: Validate SQE128 flag before accessing the cmd ublk_ctrl_cmd_dump() accesses (header CVE-2026-45962 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: ublk: Validate SQE128 flag before accessing the cmd ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before IO_URING_F_SQE128 flag check. This could cause out of boundary memory access. Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return -EINVAL immediately if the flag is not set.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
May 27, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Fix memory access flags in helper prototypes After commit 37cce22dbd51 ("bpf: verifieCVE-2026-45903 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix memory access flags in helper prototypes After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"), the verifier started relying on the access type flags in helper function prototypes to perform memory access optimizations. Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the verifier to incorrectly assume that the buffer contents are unchanged across the helper call. Consequently, the verifier may optimize away subsequent reads based on this wrong assumption, leading to correctness issues. For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM which correctly indicates write access to potentially uninitialized memory. Similar issues were recently addressed for specific helpers in commit ac44dcc788b9 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer") and commit 2eb7648558a7 ("bpf: Specify access type of bpf_sysctl_get_name args"). Fix these prototypes by adding the correct memory access flag
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
May 26, 2026The password and username reset features created plain http links for https connections if the "Force SSL" flag wasn't explicitly set.CVE-2026-48902 · Websites & servers · Joomla! Project · reported by security@joomla.orgCritical 9.8
The password and username reset features created plain http links for https connections if the "Force SSL" flag wasn't explicitly set.
Product
Joomla! CMS
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record developer.joomla.org
May 26, 2026FastNetMon Community Edition through 1.2.9 has out-of-bounds memory access because it incorrectly parses BGP path attributes with the extended length flag set.CVE-2026-48685 · Other software · Pavel-odintsov · reported by MITREMedium 6.5
FastNetMon Community Edition through 1.2.9 has out-of-bounds memory access because it incorrectly parses BGP path attributes with the extended length flag set. In src/bgp_protocol.hpp, the parse_raw_bgp_attribute() function correctly identifies when extended_length_bit is set and sets length_of_length_field to 2, but then reads only a single byte for the attribute value length (attribute_value_length = value[2] at line 173). Per RFC 4271 Section 4.3, when the Extended Length bit is set, the Attribute Length field is two octets and the value should be read as a 16-bit big-endian integer from value[2] and value[3]. As a result, any attribute longer than 255 bytes has its length silently truncated to the low byte (e.g., 300 bytes = 0x012C is read as 0x2C = 44 bytes). The remaining 256 bytes are then misinterpreted as subsequent attributes, causing cascading parse failures and potential out-of-bounds memory access.
Product
Fastnetmon
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
May 26, 2026libyang before 5.2.6 contains a heap use-after-free write vulnerability in lyd_parser_set_data_flags that incorrectly updates metadata list pointers when freeinCVE-2026-41401 · Other software · libyang · reported by VulnCheckHigh 7.1
libyang before 5.2.6 contains a heap use-after-free write vulnerability in lyd_parser_set_data_flags that incorrectly updates metadata list pointers when freeing non-head default metadata entries. Attackers can trigger this vulnerability by submitting crafted YANG XML documents with specific metadata attributes to applications parsing untrusted XML data, causing process crashes or potential code execution.
Product
libyang
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
May 22, 2026The Docker CLI --use-api-socket flag bypasses Enhanced Container Isolation (ECI) restrictions in Docker Desktop.CVE-2026-6406 · Other software · Docker · reported by security@docker.comHigh 8.8
The Docker CLI --use-api-socket flag bypasses Enhanced Container Isolation (ECI) restrictions in Docker Desktop. When ECI is enabled, Docker socket mounts from containers are denied unless explicitly allowed via the admin-settings configuration. However, the --use-api-socket flag adds the Docker socket mount via the HostConfig.Mounts field rather than the HostConfig.Binds field. The ECI enforcement in the Docker Desktop API proxy only inspected Binds, allowing the mount to pass unchecked. This grants a container full access to the Docker Engine socket and, if the host user has logged in to container registries, their authentication credentials. A local attacker with the ability to run Docker CLI commands can exploit this to escape ECI restrictions, access the Docker Engine, and potentially escalate privileges.
Product
Docker Desktop
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record docs.docker.com zerodayinitiative.com
May 22, 2026The Verify() method for FIDO/U2F security key types (sk-ecdsa-sha2-nistp256@openssh.com, sk-ssh-ed25519@openssh.com) did not check the User Presence flag.CVE-2026-39831 · Other software · golang.org/x/crypto · reported by security@golang.orgCritical 9.1
The Verify() method for FIDO/U2F security key types (sk-ecdsa-sha2-nistp256@openssh.com, sk-ssh-ed25519@openssh.com) did not check the User Presence flag. Signatures generated without physical touch were accepted, allowing unattended use of a hardware security key. To restore the previous behavior, return a "no-touch-required" extension in Permissions.Extensions from PublicKeyCallback.
Product
golang.org/x/crypto/ssh
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record go.dev go.dev
May 21, 2026A missing output length bounds check in pull_charset_flags() in Netatalk 2.0.4 through 4.4.2 allows a remote authenticated attacker to execute arbitrary code orCVE-2026-44062 · Other software · Netatalk · reported by 33c584b5-0579-4c06-b2a0-8d8329fcab9cHigh 7.5
A missing output length bounds check in pull_charset_flags() in Netatalk 2.0.4 through 4.4.2 allows a remote authenticated attacker to execute arbitrary code or cause a denial of service via crafted character set data.
Product
Netatalk
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record netatalk.io
May 13, 2026In the Linux kernel, the following vulnerability has been resolved: arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults contpte_ptep_set_acCVE-2026-43486 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: arm64: contpte: fix set_access_flags() no-op check for SMMU/ATS faults contpte_ptep_set_access_flags() compared the gathered ptep_get() value against the requested entry to detect no-ops. ptep_get() ORs AF/dirty from all sub-PTEs in the CONT block, so a dirty sibling can make the target appear already-dirty. When the gathered value matches entry, the function returns 0 even though the target sub-PTE still has PTE_RDONLY set in hardware. For a CPU with FEAT_HAFDBS this gathered view is fine, since hardware may set AF/dirty on any sub-PTE and CPU TLB behavior is effectively gathered across the CONT range. But page-table walkers that evaluate each descriptor individually (e.g. a CPU without DBM support, or an SMMU without HTTU, or with HA/HD disabled in CD.TCR) can keep faulting on the unchanged target sub-PTE, causing an infinite fault loop. Gathering can therefore cause false no-ops when only a sibling has been updated: - write faults: target still has PTE_RDONLY (needs PTE_RDONLY cleared) - read faults: target still lacks PTE_AF Fix by checking each sub-PTE against the requested AF/dirty/write state (the sa
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
May 13, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: core: Avoid bitfield RMW for claim/retune flags Move claimed and retune control flagsCVE-2026-43484 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: mmc: core: Avoid bitfield RMW for claim/retune flags Move claimed and retune control flags out of the bitfield word to avoid unrelated RMW side effects in asynchronous contexts. The host->claimed bit shared a word with retune flags. Writes to claimed in __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwrite other bits when concurrent updates happen in other contexts, triggering spurious WARN_ON(!host->claimed). Convert claimed, can_retune, retune_now and retune_paused to bool to remove shared-word coupling.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
May 8, 2026In the Linux kernel, the following vulnerability has been resolved: fs: init flags_valid before calling vfs_fileattr_get syzbot reported a uninit-value bug inCVE-2026-43474 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: fs: init flags_valid before calling vfs_fileattr_get syzbot reported a uninit-value bug in [1]. Similar to the "*get" context where the kernel's internal file_kattr structure is initialized before calling vfs_fileattr_get(), we should use the same mechanism when using fa. [1] BUG: KMSAN: uninit-value in fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517 fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517 vfs_fileattr_get fs/file_attr.c:94 [inline] __do_sys_file_getattr fs/file_attr.c:416 [inline] Local variable fa.i created at: __do_sys_file_getattr fs/file_attr.c:380 [inline] __se_sys_file_getattr+0x8c/0xbd0 fs/file_attr.c:372
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
May 1, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check tdls flag in ieee80211_tdls_oper When NL80211_TDLS_ENABLE_LINK is caCVE-2026-43052 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check tdls flag in ieee80211_tdls_oper When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the station exists but not whether it is actually a TDLS station. This allows the operation to proceed for non-TDLS stations, causing unintended side effects like modifying channel context and HT protection before failing. Add a check for sta->sta.tdls early in the ENABLE_LINK case, before any side effects occur, to ensure the operation is only allowed for actual TDLS peers.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
May 1, 2026In the Linux kernel, the following vulnerability has been resolved: drm/xe/pxp: Clear restart flag in pxp_start after jumping back If we don't clear the flag CVE-2026-31784 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: drm/xe/pxp: Clear restart flag in pxp_start after jumping back If we don't clear the flag we'll keep jumping back at the beginning of the function once we reach the end. (cherry picked from commit 0850ec7bb2459602351639dccf7a68a03c9d1ee0)
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
May 1, 2026In the Linux kernel, the following vulnerability has been resolved: comedi: runflags cannot determine whether to reclaim chanlist syzbot reported a memory leaCVE-2026-31750 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: comedi: runflags cannot determine whether to reclaim chanlist syzbot reported a memory leak [1], because commit 4e1da516debb ("comedi: Add reference counting for Comedi command handling") did not consider the exceptional exit case in do_cmd_ioctl() where runflags is not set. This caused chanlist not to be properly freed by do_become_nonbusy(), as it only frees chanlist when runflags is correctly set. Added a check in do_become_nonbusy() for the case where runflags is not set, to properly free the chanlist memory. [1] BUG: memory leak backtrace (crc 844a0efa): __comedi_get_user_chanlist drivers/comedi/comedi_fops.c:1815 [inline] do_cmd_ioctl.part.0+0x112/0x350 drivers/comedi/comedi_fops.c:1890 do_cmd_ioctl drivers/comedi/comedi_fops.c:1858 [inline]
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Apr 24, 2026In the Linux kernel, the following vulnerability has been resolved: clockevents: Add missing resets of the next_event_forced flag The prevention mechanism agaCVE-2026-31574 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: clockevents: Add missing resets of the next_event_forced flag The prevention mechanism against timer interrupt starvation missed to reset the next_event_forced flag in a couple of places: - When the clock event state changes. That can cause the flag to be stale over a shutdown/startup sequence - When a non-forced event is armed, which then prevents rearming before that event. If that event is far out in the future this will cause missed timer interrupts. - In the suspend wakeup handler. That led to stalls which have been reported by several people. Add the missing resets, which fixes the problems for the reporters.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Apr 24, 2026In the Linux kernel, the following vulnerability has been resolved: futex: Require sys_futex_requeue() to have identical flags Nicholas reported that his LLM CVE-2026-31554 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: futex: Require sys_futex_requeue() to have identical flags Nicholas reported that his LLM found it was possible to create a UaF when sys_futex_requeue() is used with different flags. The initial motivation for allowing different flags was the variable sized futex, but since that hasn't been merged (yet), simply mandate the flags are identical, as is the case for the old style sys_futex() requeue operations.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Apr 22, 2026A logic error in the cut utility of uutils coreutils causes the utility to ignore the -s (only-delimited) flag when using the -z (null-terminated) and -d '' (emCVE-2026-35381 · Other software · Uutils · reported by security@ubuntu.comLow 3.3
A logic error in the cut utility of uutils coreutils causes the utility to ignore the -s (only-delimited) flag when using the -z (null-terminated) and -d '' (empty delimiter) options together. The implementation incorrectly routes this specific combination through a specialized newline-delimiter code path that fails to check the record suppression status. Consequently, uutils cut emits the entire record plus a NUL byte instead of suppressing it. This divergence from GNU coreutils behavior creates a data integrity risk for automated pipelines that rely on cut -s to filter out undelimited data.
Product
coreutils
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Apr 22, 2026A logic error in the ln utility of uutils coreutils allows the utility to dereference a symbolic link target even when the --no-dereference (or -n) flag is explCVE-2026-35372 · Other software · Uutils · reported by security@ubuntu.comMedium 5
A logic error in the ln utility of uutils coreutils allows the utility to dereference a symbolic link target even when the --no-dereference (or -n) flag is explicitly provided. The implementation previously only honored the "no-dereference" intent if the --force (overwrite) mode was also enabled. This flaw causes ln to follow a symbolic link that points to a directory and create new links inside that target directory instead of treating the symbolic link itself as the destination. In environments where a privileged user or system script uses ln -n to update a symlink, a local attacker could manipulate existing symbolic links to redirect file creation into sensitive directories, potentially leading to unauthorized file creation or system misconfiguration.
Product
coreutils
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Apr 22, 2026A Time-of-Check to Time-of-Use (TOCTOU) vulnerability exists in the install utility of uutils coreutils when using the -D flag.CVE-2026-35356 · Other software · Uutils · reported by security@ubuntu.comMedium 6.3
A Time-of-Check to Time-of-Use (TOCTOU) vulnerability exists in the install utility of uutils coreutils when using the -D flag. The command creates parent directories and subsequently performs a second path resolution to create the target file, neither of which is anchored to a directory file descriptor. An attacker with concurrent write access can replace a path component with a symbolic link between these operations, redirecting the privileged write to an arbitrary file system location.
Product
coreutils
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Apr 22, 2026The mkdir utility in uutils coreutils incorrectly applies permissions when using the -m flag by creating a directory with umask-derived permissions (typically 0CVE-2026-35353 · Other software · Uutils · reported by security@ubuntu.comLow 3.3
The mkdir utility in uutils coreutils incorrectly applies permissions when using the -m flag by creating a directory with umask-derived permissions (typically 0755) before subsequently changing them to the requested mode via a separate chmod system call. In multi-user environments, this introduces a brief window where a directory intended to be private is accessible to other users, potentially leading to unauthorized data access.
Product
coreutils
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Apr 8, 2026parseusbs before 1.9 contains an OS command injection vulnerability where the volume listing path argument (-v flag) is passed unsanitized into an os.popen() shCVE-2026-40030 · Other software · khyrenz · reported by VulnCheckHigh 8.4
parseusbs before 1.9 contains an OS command injection vulnerability where the volume listing path argument (-v flag) is passed unsanitized into an os.popen() shell command with ls, allowing arbitrary command injection via crafted volume path arguments containing shell metacharacters. An attacker can provide a crafted volume path via the -v flag that injects arbitrary commands during volume content enumeration.
Product
parseusbs
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Apr 3, 2026In the Linux kernel, the following vulnerability has been resolved: soc: fsl: qbman: fix race condition in qman_destroy_fq When QMAN_FQ_FLAG_DYNAMIC_FQID is sCVE-2026-23463 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 4.7
In the Linux kernel, the following vulnerability has been resolved: soc: fsl: qbman: fix race condition in qman_destroy_fq When QMAN_FQ_FLAG_DYNAMIC_FQID is set, there's a race condition between fq_table[fq->idx] state and freeing/allocating from the pool and WARN_ON(fq_table[fq->idx]) in qman_create_fq() gets triggered. Indeed, we can have: Thread A Thread B qman_destroy_fq() qman_create_fq() qman_release_fqid() qman_shutdown_fq() gen_pool_free() -- At this point, the fqid is available again -- qman_alloc_fqid() -- so, we can get the just-freed fqid in thread B -- fq->fqid = fqid; fq->idx = fqid * 2; WARN_ON(fq_table[fq->idx]); fq_table[fq->idx] = fq; fq_table[fq->idx] = NULL; And adding some logs between qman_release_fqid() and fq_table[fq->idx] = NULL makes the WARN_ON() trigger a lot more. To prevent that, ensure that fq_table[fq->idx] is set to NULL befo
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Mar 27, 2026Wazuh provisioning scripts and Dockerfiles contain an insecure transport vulnerability where curl is invoked with the -k/--insecure flag, disabling SSL/TLS certCVE-2025-15612 · Other software · Wazuh · reported by VulnCheckMedium 6.3
Wazuh provisioning scripts and Dockerfiles contain an insecure transport vulnerability where curl is invoked with the -k/--insecure flag, disabling SSL/TLS certificate validation. Attackers with network access can perform man-in-the-middle attacks to intercept and modify downloaded dependencies or code during the build process, leading to remote code execution and supply chain compromise.
Product
Wazuh Provisioning Scripts (Agent Build Environment)
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com vulncheck.com
Mar 21, 2026Post Flagger: Stored Cross-Site ScriptingCVE-2026-1854 · WordPress plugins & themes · reported by WordfenceMedium 6.4
The Post Flagger plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'flag' shortcode in all versions up to, and including, 1.1 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
Product
Post Flagger
Affected
up to 1.1
What to do
Affects up to 1.1. Update Post Flagger to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD record plugins.trac.wordpress.org plugins.trac.wordpress.org
Mar 20, 2026In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure ctx->rings is stable for task work flags manipulation If DEFER_TASKRUN | CVE-2026-23275 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure ctx->rings is stable for task work flags manipulation If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while the ring is being resized, it's possible for the OR'ing of IORING_SQ_TASKRUN to happen in the small window of swapping into the new rings and the old rings being freed. Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is protected by RCU. The task work flags manipulation is inside RCU already, and if the resize ring freeing is done post an RCU synchronize, then there's no need to add locking to the fast path of task work additions. Note: this is only done for DEFER_TASKRUN, as that's the only setup mode that supports ring resizing. If this ever changes, then they too need to use the io_ctx_mark_taskrun() helper.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Mar 19, 2026OpenClaw versions prior to 2026.3.2 fail to pass the senderIsOwner flag when processing Discord voice transcripts in agentCommand, causing the flag to default tCVE-2026-32035 · Other software · OpenClaw · reported by VulnCheckMedium 5.8
OpenClaw versions prior to 2026.3.2 fail to pass the senderIsOwner flag when processing Discord voice transcripts in agentCommand, causing the flag to default to true. Non-owner voice participants can exploit this omission to access owner-only tools including gateway and cron functionality in mixed-trust channels.
Product
OpenClaw
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com vulncheck.com
Mar 18, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and cCVE-2026-23267 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes During SPO tests, when mounting F2FS, an -EINVAL error was returned from f2fs_recover_inode_page. The issue occurred under the following scenario Thread A Thread B f2fs_ioc_commit_atomic_write - f2fs_do_sync_file // atomic = true - f2fs_fsync_node_pages : last_folio = inode folio : schedule before folio_lock(last_folio) f2fs_write_checkpoint - block_operations// writeback last_folio - schedule before f2fs_flush_nat_entries : set_fsync_mark(last_folio, 1) : set_dentry_mark(last_folio, 1) : folio_mark_dirty(last_folio) - __write_node_folio(last_folio) : f2fs_down_read(&sbi->node_write)//block - f2fs_flush_nat_entries : {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED) - unblock_operations
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Mar 11, 2026flagd is a feature flag daemon with a Unix philosophy.CVE-2026-31866 · Other software · open-feature · reported by GitHubHigh 7.5
flagd is a feature flag daemon with a Unix philosophy. Prior to 0.14.2, flagd exposes OFREP (/ofrep/v1/evaluate/...) and gRPC (evaluation.v1, evaluation.v2) endpoints for feature flag evaluation. These endpoints are designed to be publicly accessible by client applications. The evaluation context included in request payloads is read into memory without any size restriction. An attacker can send a single HTTP request with an arbitrarily large body, causing flagd to allocate a corresponding amount of memory. This leads to immediate memory exhaustion and process termination (e.g., OOMKill in Kubernetes environments). flagd does not natively enforce authentication on its evaluation endpoints. While operators may deploy flagd behind an authenticating reverse proxy or similar infrastructure, the endpoints themselves impose no access control by default. This vulnerability is fixed in 0.14.2.
Product
flagd
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Feb 25, 2026A vulnerability has been identified within Rancher Manager, where using self-signed CA certificates and passing the -skip-verify flag to the Rancher CLI login cCVE-2025-67601 · Other software · SUSE · reported by meissner@suse.deHigh 8.3
A vulnerability has been identified within Rancher Manager, where using self-signed CA certificates and passing the -skip-verify flag to the Rancher CLI login command without also passing the –cacert flag results in the CLI attempting to fetch CA certificates stored in Rancher’s setting cacerts.
Product
rancher
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record bugzilla.suse.com github.com

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Vulnerability database

The flaws that hit local websites, every Friday.

Tell us what you're building.