Critical security advisoryCriticalFlagged by our vulnerability database: PHP2Shell is on CISA’s exploited list. Most WordPress hosting runs PHP. See if your site is affectedFlagged by our vulnerability database: PHP2Shell is being exploited. DetailsExploited: PHP2Shell. Check your site
HuttenlocherTechnologies
Updated 12 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,766exploited flaws on CISA’s list
36added in the last 30 days
512new WordPress flaws this week
391,181entries in the database

21,994 results · page 29 of 440

  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN When exchanging two CVE-2026-97547 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN When exchanging two full-file ranges, xmi_can_exchange_reflink_flags() can move the reflink inode flag from the file that currently has it to the other file, as long as exactly one side is marked. This assumes that the file contents, and therefore all shared extents, are exchanged. That assumption is not true when XFS_EXCHMAPS_INO1_WRITTEN is set. xfs_exchmaps_can_skip_mapping() can skip hole and unwritten mappings from file1, so an exchange can complete without moving every mapping that the earlier flag-swap decision accounted for. In that case the post-operation cleanup can clear the reflink flag from an inode that still owns shared written extents. Later writes then take the non-reflink write path and may update blocks that should still have been protected by CoW, which shows up as data corruption between reflink-related files. Fix this by disabling the reflink flag exchange whenever XFS_EXCHMAPS_INO1_WRITTEN is requested. The contents exchange can still proceed; the conservative outcome is that both inodes keep the reflink flag. The

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: xfs: don't spin forever on zero-length dirents when salvaging them LOLLM noticed that xrepCVE-2026-97546 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: xfs: don't spin forever on zero-length dirents when salvaging them LOLLM noticed that xrep_dir_recover_data can spin forever if it encounters an unused dirent that claims to have length zero. Fix that, and prevent the same thing from happening with a zero-length entry.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: xfs: don't leak new_bp if xfs_btree_bload_drop_buf fails LOLLM observes that in xfs_btree_CVE-2026-97545 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: xfs: don't leak new_bp if xfs_btree_bload_drop_buf fails LOLLM observes that in xfs_btree_bload_prep_block, xfs_btree_bload_drop_buf can hit an IO error if writing the delwri buffer list to disk fails. In this case, we fail to release new_bp, which means we lose a locked buffer. Fix that.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: xfs: don't leak dqacct if rhashtable insertion fails LOLLM observes that xqcheck_mod_live_CVE-2026-97544 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: xfs: don't leak dqacct if rhashtable insertion fails LOLLM observes that xqcheck_mod_live_ino_dqtrx doesn't free the newly allocated dqa object if rhashtable insertion fails. Fix this leak.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: xfs: destroy seen inode bitmap when we fail to add a dirpath LOLLM observes a memory leak CVE-2026-97543 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: xfs: destroy seen inode bitmap when we fail to add a dirpath LOLLM observes a memory leak in xchk_dirtree_create_path if we create the directory path object but appending the name to the path fails. When this happens, we don't tear down the (empty) seen inode bitmap. This is a pretty trivial error, but let's not leave logic bombs. Do the same for a similar bug in xrep_dirtree_create_adoption_path.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: xfs: bail out on bitmap errors in xrep_agfl_fill LOLLM also points out that the xagb_bitmaCVE-2026-97542 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: xfs: bail out on bitmap errors in xrep_agfl_fill LOLLM also points out that the xagb_bitmap_set call in xrep_agfl_fill can fail, but we don't check the result of xagb_bitmap_walk, so we silently drop the error and proceed with inconsistent incore data. That shouldn't be allowed.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: don't store usb_device_id usb_device_id is not guaranteed to live longer CVE-2026-97541 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: don't store usb_device_id usb_device_id is not guaranteed to live longer than probe due to presence of dynamic ID. All information apart from driver_data can be easily retrieved from usb_device, so just store driver_data.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: don't rely on id table pointer arithmetic The current code is broken whCVE-2026-97540 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: don't rely on id table pointer arithmetic The current code is broken when dynamic ID is involved; in such cases usb_device_id parameter of probe lives on the heap and the pointer arithmetic will get an index that is wildly out of bound. Instead of keeping a side table for additional information, use driver_info field of the usb_device_id. The dynamic ID parsing code needs to be updated for this; convert it to just write to the reserved entry for dynamic ID and remove the weird loop.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: xusbatm: don't rely on id table pointer arithmetic The current code is broken when dyCVE-2026-97539 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: usb: xusbatm: don't rely on id table pointer arithmetic The current code is broken when dynamic ID is involved; in such cases usb_device_id parameter of probe lives on the heap and the pointer arithmetic will get an index that is wildly out of bound. xusbatm initialize the USB device IDs dynamically so it can just use driver_info too. Even with conversion, xusbatm still cannot support dynamic IDs, so also set no_dynamic_id.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_rog_ryujin) Validate HID report lengths rog_ryujin_raw_event() parses responsCVE-2026-97538 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_rog_ryujin) Validate HID report lengths rog_ryujin_raw_event() parses response headers and payload fields without first checking that they are present in the received report. A short report can therefore make the driver consume uninitialized bytes from the HID transport buffer and expose them as sensor values through sysfs. Validate the response header and the fields used by each response type before parsing them.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking qla25xx_free_req_que() CVE-2026-97537 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking qla25xx_free_req_que() and qla25xx_free_rsp_que() have two pre-existing bugs exposed on the error path of qla25xx_create_{req,rsp}_que(): 1. When dma_alloc_coherent() fails during queue creation, the error path calls the free function with req->ring / rsp->ring still NULL (from kzalloc). The unconditional dma_free_coherent() with a NULL cpu_addr is undefined behavior and can panic. 2. The free functions clear req_qid_map / rsp_qid_map under vport_lock, but the create functions protect the same bitmaps with mq_lock. This provides no mutual exclusion. Additionally, the create error path clears the bit and releases mq_lock before calling the free function, creating a window where another thread can allocate the same que_id and have its ha->req_q_map entry clobbered by the subsequent lockless NULL assignment in the free function. Fix by: - Guarding dma_free_coherent() with a NULL check on the ring pointer. - Using mq_lock (the lock held by all creators) in the free functions to atomically NULL the map

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown The response queue MSI-XCVE-2026-97536 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules qla_do_work() via queue_work(ha->wq, &qpair->q_work). qla_do_work() dereferences the qpair (vha, rsp) and takes qpair->qp_lock. During teardown, qla2xxx_delete_qpair() deletes the response queue, which calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and the qpair. free_irq() waits for running hardirq handlers but does not cancel work already placed on ha->wq. A still-pending q_work then runs qla_do_work() against the freed qpair and response queue, causing a use-after-free. This is especially likely during full adapter teardown, where destroy_workqueue(ha->wq) forces pending work to run after the queue pairs have been freed. Flush the work item with cancel_work_sync() in qla25xx_free_rsp_que() after free_irq() has released the interrupt (so no new work can be queued) and before the response queue and qpair memory are freed (so the flushed handler still sees valid memory). Guard on rsp->qpair and ha->wq to match the INIT_WORK() condition and avoid operating on an

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size The VP control IOCB selectsCVE-2026-97535 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound VP index against VP_CTRL IOCB bitmap size The VP control IOCB selects its target virtual port by setting one bit in vp_idx_map, a fixed 16-byte (128-bit) array in both vp_ctrl_entry_24xx and vp_ctrl_entry_24xx_ext. qla25xx_ctrlvp_iocb() computes map = (vp_index - 1) / 8 and writes vce->vp_idx_map[map] without checking that map stays within the array. max_npiv_vports is taken from firmware and only sanitized to a MIN_MULTI_ID_FABRIC-aligned boundary, so it can legitimately be 191 or 255, and qla24xx_control_vp() only rejects vp_index >= max_npiv_vports. A vp_index above 128 therefore yields map >= 16 and an out-of-bounds write of up to 16 bytes past vp_idx_map, corrupting the trailing IOCB fields (or the adjacent request-ring slot on the 64-byte layout). Reject a vp_index that cannot be represented in the IOCB bitmap in qla24xx_control_vp(), and add a defensive ARRAY_SIZE() guard in qla25xx_ctrlvp_iocb() before the write. Adapters that report the usual 63 or 127 NPIV vports are unaffected.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: accurately adjust free_sections during free_segment_range In free_segment_range(), MCVE-2026-97534 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: f2fs: accurately adjust free_sections during free_segment_range In free_segment_range(), MAIN_SECS(sbi) is temporarily reduced by `secs` to restrict block allocation to the safe remaining main area while valid blocks in the truncated range are evacuated by GC. However, FREE_I(sbi)->free_sections tracks the total number of free sections across the whole filesystem. If any sections within the truncated range were already free upon entering free_segment_range(), failing to deduct them from free_sections causes the filesystem to overestimate available free sections in the active, reduced main area. This leads to inconsistent free section accounting during GC data migration and can trigger unexpected allocation failures or assertion errors when space is tight. Fix this by calculating the number of already-free sections in the truncated range, deducting them from free_sections upon entering free_segment_range(), and restoring them on exit.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Acquire init_mm read lock on attribute changes to avoid UAF A previous commit CVE-2026-97533 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Acquire init_mm read lock on attribute changes to avoid UAF A previous commit protected against races between ptdump and CPA collapse, however one still exists between attribute changes and collapse as reported by Denis V. Lunev (linked). When an attribute change arises, a lockless page table walker obtains a PTE entry, which is later written to via set_pte_atomic(): ... -> change_page_attr_set_clr() -> __change_page_attr_set_clr() -> __change_page_attr() -> _lookup_address_cpa() -> lookup_address_in_pgd_attr() -> [ lockless page table walker ] -> set_pte_atomic() There is nothing preventing a concurrent CPA collapse which can free the PTE that was retrieved here, resulting in a use-after-free. With the mmap write lock taken on init_mm over CPA collapse, resolve this race by acquiring an mmap read lock on init_mm over __change_page_attr_set_clr(). This locks across the whole operation over which the walk and the PTE entry write occurs, solving the race. It is safe to do this here, as no spinlocks are held upon entry to __change_page_attr_set_clr(). However, the lock must not be hel

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path When qla2x00_mem_CVE-2026-97532 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path When qla2x00_mem_alloc() fails, qla2x00_probe_one() jumps to probe_hw_failed and calls qla2x00_mem_free(). Several error labels in qla2x00_mem_alloc() freed adapter members (elsrej.c, purex_dma_pool, flt, sfp_data, loop_id_map, async_pd, sf_init_cb, ex_init_cb, npiv_info) but left the pointers dangling. qla2x00_mem_free() then freed them a second time. Worse, for the dma_pool members it issued dma_pool_free(ha->s_dma_pool, ...) after s_dma_pool had already been destroyed and set to NULL at fail_s_dma_pool, dereferencing a NULL pool. Clear each freed pointer (and its DMA handle) in the error labels so the subsequent qla2x00_mem_free() skips them.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip vport under deletion in report ID acquisition qla24xx_report_id_acquisCVE-2026-97531 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip vport under deletion in report ID acquisition qla24xx_report_id_acquisition() format-1 handling walks ha->vp_list under vport_slock, takes a vref_count on the matching vport and calls qla_update_host_map() to register its port id. A vport teardown via qla24xx_vport_delete() sets VPORT_DELETE, then qla24xx_disable_vp() removes the vport from the host_map btree and zeroes vha->d_id (RESET_AL_PA). The vport is only unlinked from vp_list later, in qla24xx_deallocate_vp_id(), which clears vp_map[idx] (RESET_VP_IDX) but does not touch host_map. In the window in between, report ID acquisition can still find the vport on vp_list and call qla_update_host_map(); with d_id already zeroed it takes the btree_insert32() path and re-inserts the dying vport into host_map. Nothing cleans that entry afterwards, so once scsi_host_put() frees the vha a later host_map lookup dereferences freed memory. Skip a vport that has VPORT_DELETE set before taking the reference, so it is neither re-registered nor scheduled for DPC re-registration. This mirrors the existing guard in qla2x00_alert_all_vps().

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature qla27xx_copy_multiple_pCVE-2026-97530 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll rsp_q->ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide whether the next continuation IOCB has arrived, spinning on cpu_relax() without advancing the ring or decrementing the entry count while it has not. response_t::signature lives at byte offset 60, but a continuation IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame payload at that offset (data[56..59]). A received frame whose payload bytes happen to equal 0xDEADDEAD is therefore misread as "not yet arrived", and the loop spins forever in interrupt/DPC context, causing a CPU soft lockup. The poll is also unnecessary: callers of qla27xx_copy_multiple_pkt() (PT_LS4_UNSOL and the NVMe purls path) already gate on qla_chk_cont_iocb_avail(), which guarantees all entry_count IOCBs are present before copying begins. The sibling helper __qla_copy_purex_to_buffer() already drops the signature poll and relies on the entry_type == STATUS_CONT_TYPE guard instead. Remove the signature busy-wait from both he

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[] The FC BSG transport aCVE-2026-97529 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[] The FC BSG transport allocates job->request via memdup_user() using the exact user-supplied request_len. For FC_BSG_HST_VENDOR, fc_bsg_host_dispatch() only guarantees request_len covers msgcode and vendor_id; it does not account for the vendor_cmd[] flexible array. qla2xxx then reads the command selector vendor_cmd[0] and, in several sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor command area without verifying request_len. A caller holding CAP_SYS_RAWIO can submit a short request whose vendor_id matches the host, triggering out-of-bounds heap reads (KASAN-detectable, and able to mis-select a command or panic). Add a central guard in qla2x00_process_vendor_specific() so the selector is always in bounds, restrict the early vendor_cmd[0] read in qla24xx_bsg_request() to sufficiently long vendor messages, and add request_len checks to the sub-handlers that read further: qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(), qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(), qla2x00_update_optrom(), qlafx00_mgmt_

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error qla_nvme_xmt_ls_rspCVE-2026-97528 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Unlink NVMe unsol ctx before freeing on LS reject error qla_nvme_xmt_ls_rsp() obtains uctx, which was linked into fcport->unsol_ctx_head by qla2xxx_process_purls_iocb() and is still linked when the NVMe transport calls back to transmit the LS response. On the error (out:) path the function frees uctx with kfree() but never removes it from the list. This leaves a freed node in fcport->unsol_ctx_head: the next list_add_tail() for that fcport writes through the freed node, and a subsequent list_del() can corrupt the list or panic. Unlink uctx with list_del() before kfree() on the error path, matching the other free sites in qla_nvme_release_lsrsp_cmd_kref() and qla2xxx_process_purls_pkt(). qla2x00_rel_sp() in the failure path only returns the SRB to its pool and does not invoke sp->put_fn, so the out: path is the sole free and uctx is always still linked there.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock The fcport->unsol_ctx_CVE-2026-97527 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock The fcport->unsol_ctx_head list is modified from several contexts without a common lock. Entries are added in qla2xxx_process_purls_iocb() from the response queue ISR (under the qpair qp_lock), while they are removed from qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp() (NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB completion). The qpair qp_lock cannot serialize this per-fcport list since multiqueue adapters add entries through different qpairs, so a concurrent add and delete (or two concurrent deletes) can corrupt the list pointers. Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del() on unsol_ctx_head. The add nests under the existing qp_lock; no delete path takes qp_lock, so the lock order is consistent and deadlock free.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: s390/pai: Support CPU hotplug for PMU PAI The command 'perf stat -e pai_crypto/CRYPTO_ALL/CVE-2026-97526 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: s390/pai: Support CPU hotplug for PMU PAI The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- <command>' crashes the kernel when CPUs are hotplug added during that run. Root cause is the missing allocation of per-CPU data structures for that new CPU. The allocation is dynamic and the first event that has task context creates such a structure for each online CPU. This is not sufficient. CPUs may be offline during event creation and can be set online during the perf run time. For example commands # echo 0 > /sys/devices/system/cpu/cpu1/online # perf stat -e cycles -i -- stress-ng -t10s --matrix X # sleep 1 # echo 1 > /sys/devices/system/cpu/cpu1/online Currently without a CPU hotplug handler, that new CPU has no per-CPU data infrastructure. The scheduler runs PMU call back function pai_add() to install the PMU support for that CPU before the task is being scheduled on that new CPU. In pai_add() instructions mp = this_cpu_ptr(pai_root[idx].mapptr); cpump = mp->mapptr; return a NULL pointer and the result is a kernel panic as variable cpump is used inside that function. Add CPU hotplug support for C

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Allocate split page tables as kernel page tables A PTE is allocated directly wCVE-2026-97525 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.2

    In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Allocate split page tables as kernel page tables A PTE is allocated directly without going through the standard page table allocation routines (such as pte_alloc_one_kernel()) when the CPA code splits a large page (__split_large_page()). This means the page table constructor is never called nor is the page table marked as a kernel page table. The former results in the folio associated with the page table not being marked as a page table (__pagetable_ctor() is never called thus neither is __folio_set_pgtable()) nor are statistics updated to reflect it (lruvec_stat_add_folio() is never called). The latter issue of failing to mark the page table as a kernel page table (ptdesc_set_kernel() is never called) is far more problematic. Since commit: 5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables") kernel page table freeing has been batched and since the subsequent commit: e37d5a2d60a3 ("iommu/sva: invalidate stale IOTLB entries for kernel address space") IOTLB cache entries for kernel page tables have been invalidated upon being freed. Since split page tables are freed withou

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid unneeded actions on subflow reset Once in a blue moon, the mptcp receive pathCVE-2026-97524 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

    In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid unneeded actions on subflow reset Once in a blue moon, the mptcp receive path can recursively call mptcp_data_ready() via state change under unlucky error conditions, and then try to hold the data lock again. Break the recursion loop explicitly checking for the exceptional condition. Add a new flag instead of using an existing one like 'closing', to exit early in subflow_state_change(), and explicitly flush the RX queue at reset time. This avoids unneeded processing to check for available data -- calling get_mapping_status() and more on a dying subflow -- but also in error reporting and worker scheduling. Note that we must consume the currently peeked skb before invoking mptcp_dss_corruption to avoid consuming it again after the eventual reset has freed it.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: mptcp: close race between scheduler and state change The mptcp scheduler may race with subCVE-2026-97523 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

    In the Linux kernel, the following vulnerability has been resolved: mptcp: close race between scheduler and state change The mptcp scheduler may race with subflow sockets state change: data transmission on the selected socket may fail and a later release could try to use mss_now reset to 0 for a divide operation. Address the issue by explicitly checking for the critical scenario.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: mptcp: fix bad accounting in __mptcp_subflow_push_pending() If __subflow_push_pending() erCVE-2026-97522 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: mptcp: fix bad accounting in __mptcp_subflow_push_pending() If __subflow_push_pending() errors out we should avoid updating the copied byte counters, to avoid mismatch push call later on.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: gfs2: fix quota init duplicate scan gfs2_quota_init() checks for duplicate quota_change IDCVE-2026-97521 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: gfs2: fix quota init duplicate scan gfs2_quota_init() checks for duplicate quota_change IDs while holding qd_lock and the quota hash bucket bitlock. That path used gfs2_qd_search_bucket(), which takes a lockref reference via lockref_get_not_dead(). On PREEMPT_RT this may sleep, which is not allowed under the bucket bitlock, triggering "sleeping function called from invalid context". Use a no-ref bucket lookup in this path, then continue duplicate handling without taking a lockref there. Refactor gfs2_qd_search_bucket() to build on top of the no-ref helper so lookup traversal stays in one place. This patch fixes a bug reported by syzbot.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: gfs2: move quota_init qc iterator increment Move qc++ from the loop body into the for-loopCVE-2026-97520 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

    In the Linux kernel, the following vulnerability has been resolved: gfs2: move quota_init qc iterator increment Move qc++ from the loop body into the for-loop increment expression in gfs2_quota_init(). This keeps iterator progression explicit and avoids mixing pointer advance with duplicate-slot handling in the loop body.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix null pointer dereference in devcoredump cleanup In xe_devcoredump_snapshot_freCVE-2026-97519 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix null pointer dereference in devcoredump cleanup In xe_devcoredump_snapshot_free(), ss->gt may be NULL when the snapshot was never fully populated (e.g., when cleanup is triggered without a prior capture). Guard the xe_guc_capture_put_matched_nodes() call with IS_ERR_OR_NULL() to prevent a null dereference. In xe_devcoredump_free(), the deferred work is only queued when a coredump is captured, so guard cancel_work_sync() with a check on coredump->captured.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: reject duplicate wiphy cipher suite entries Duplicate entries in wiphy->ciCVE-2026-97518 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: reject duplicate wiphy cipher suite entries Duplicate entries in wiphy->cipher_suites do not describe any additional capability, but cfg80211 currently accepts them and leaves individual consumers to deal with them. One such consumer is the WEXT compatibility code, which appends a WEP key length for each WEP cipher entry it sees. Repeated WEP entries can therefore overflow the fixed iw_range::encoding_size array returned by SIOCGIWRANGE. Reject duplicate cipher suite entries in wiphy_register() instead. This keeps the cipher suite invariant in one place and makes malformed wiphy descriptions fail early with -EINVAL, rather than relying on a single cfg80211 user to handle duplicates correctly.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject beacons with bad HE operation The HE operation element not only needCVE-2026-97517 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject beacons with bad HE operation The HE operation element not only needs to be longer than the fixed part, but also have an appropriate size for the variable part inside of it. Check this.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Add NULL check for chip->edcca_th in rtw_fw_adaptivity_result() It was recentCVE-2026-97516 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Add NULL check for chip->edcca_th in rtw_fw_adaptivity_result() It was recently reported that rtw_fw_adaptivity_result() in fw.c dereferences rtwdev->chip->edcca_th without a NULL check. The issue is that devices with the 8821CE chip don't define edcca_th in their chip info. As a result, when rtw_fw_adaptivity_result() tries to dereference it, the kernel triggers an oops. Add a NULL check for edcca_th before dereferencing it in rtw_fw_adaptivity_result() in fw.c. Placing the check at the function entry avoids logging any garbage values. This change does not address the root cause for this behavior, but it prevents the NULL dereference and the resulting oops while a more permanent solution is developed. Tested on a 8822CE chip which defines edcca_th, so this issue is not present on it, but it still uses this driver and I can verify there are no regressions.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845 On NPCM845, when a targCVE-2026-97515 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845 On NPCM845, when a target on the I3C bus gets stuck holding SDA low, the controller reports a false Master Request (MR) in-band interrupt event. The driver handles this by emitting a STOP condition to restore the bus. However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that emitting a STOP condition may spuriously set the SLVSTART interrupt status bit. In the Master Request case, this creates a feedback loop: the STOP triggers a new SLVSTART event, the IRQ handler fires again, the controller still reports an MR type, another STOP is emitted, and the cycle repeats indefinitely, resulting in an IRQ storm that can lock up the CPU. Clear the SLVSTART status bit explicitly after emitting the STOP in the Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk is set. This breaks the feedback loop without affecting normal SLVSTART processing, which is already guarded in the top-level IRQ handler by checking that MSTATUS is in SLVREQ state.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix Reports from Kernel Lock Validator handle_dynamic_resolutioCVE-2026-97514 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix Reports from Kernel Lock Validator handle_dynamic_resolution change requires that the state_lock be acquired based on the lockdep_assert_held. However, the handle_dynamic_resolution_change call in initialize_sequence does not properly obtain the lock before calling. Since the v4l2_ctrl_find and s_ctrl can sleep, they should not be called while a lock is already held. Store off the fbc_buf_count then properly update control once lock has been freed.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Release m2m_ctx after Instance Removed from List Possible use aCVE-2026-97513 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Release m2m_ctx after Instance Removed from List Possible use after free if IRQ thread manages to obtain spinlock between m2m_ctx release and wave5_release function removing stream instance from list of active instances. The IRQ thread looks for the m2m_ctx which is freed so null pointer dereference occurs.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: spi: spi-qcom-qspi: Fix incomplete error handling in runtime PM The runtime PM functions hCVE-2026-97512 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: spi: spi-qcom-qspi: Fix incomplete error handling in runtime PM The runtime PM functions had incomplete error handling that could leave the system in an inconsistent state. If any operation failed midway through suspend or resume, some resources would be left in the wrong state while others were already changed, leading to potential clock/power imbalances. Reorder the suspend/resume sequences to avoid brownout risk by ensuring the performance state is set appropriately before clocks are enabled and clocks are disabled before dropping the performance state. Fix by adding proper error checking for all operations and using goto-based cleanup to ensure all successfully acquired resources are properly released on any error.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid out-of-bounds access in monitor In NAN, we don't know on what band tCVE-2026-97511 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid out-of-bounds access in monitor In NAN, we don't know on what band the frame will be sent. Therefore we set info->band to NUM_NL80211_BANDS. However, this leads to out-of-bound access in ieee80211_add_tx_radiotap_header when we try to access the sbands array. Fix it by not accessing the array if the band is NUM_NL80211_BANDS. This means that we will not report rate info for legacy rate in NAN. But nobody really cares about it.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Release request if tb_cfg_request() fails in __tb_xdomain_response() If tb_cfCVE-2026-97510 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Release request if tb_cfg_request() fails in __tb_xdomain_response() If tb_cfg_request() fails setting up the request (for example the control channel is shut down already) it returns an error without calling the callback. To avoid leaking that memory, call tb_cfg_request_put() if tb_cfg_request() fails.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Keep XDomain reference during the lifetime of a service This is needed becausCVE-2026-97509 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Keep XDomain reference during the lifetime of a service This is needed because we release the service ID in tb_service_release() and the ID array is owned by the parent XDomain.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Set tb->root_switch to NULL when domain is stopped Similarly what we do with CVE-2026-97508 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

    In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Set tb->root_switch to NULL when domain is stopped Similarly what we do with the firmware connection manager. This makes tb_xdp_handle_request() return error to the remote host. However, we need to make sure we keep the uuid alive so that we can reply until the whole domain is released.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: media: dm1105: fix missing error check for dma_alloc_coherent The return value of dm1105_dCVE-2026-97507 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: media: dm1105: fix missing error check for dma_alloc_coherent The return value of dm1105_dma_map(), which handles DMA memory allocation, is ignored in dm1105_hw_init(). If dma_alloc_coherent() fails, the driver will proceed using a NULL pointer for DMA transfers, leading to a kernel oops or invalid hardware access. Fix this by checking the return value and propagating -ENOMEM on failure.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: crypto: ixp4xx - fix buffer chain unwind on allocation failure chainup_buffers() builds a CVE-2026-97506 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: crypto: ixp4xx - fix buffer chain unwind on allocation failure chainup_buffers() builds a linked list of buffer descriptors for a scatterlist. If dma_pool_alloc() fails while constructing the list, the current code sets buf to NULL and later dereferences it unconditionally at the end of the function: buf->next = NULL; buf->phys_next = 0; This can lead to a null-pointer dereference on allocation failure. If the failure happens after part of the descriptor chain has already been allocated and DMA-mapped, the partially constructed chain also needs to be released. Fix this by terminating the partially constructed chain on allocation failure and letting the callers unwind it via their existing cleanup paths. Also fix ablk_perform() to preserve the hook pointers before checking for failure, so partially built chains can be freed correctly.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store() Currently, the __resource_CVE-2026-97505 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store() Currently, the __resource_resize_store() allows writing to the resourceN_resize sysfs attribute to change a BAR's size without checking for capabilities, currently relying only on the file access check. Resizing a BAR modifies PCI device configuration and can disrupt active drivers. After the upcoming conversion to static attributes, it will also trigger resource file updates via sysfs_update_groups(). Add a CAP_SYS_ADMIN check to prevent unprivileged users from performing BAR resize operations.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: watchdog: lenovo_se10_wdt: Fix use-after-free and resource leak risk Review by sashiko.devCVE-2026-97504 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: watchdog: lenovo_se10_wdt: Fix use-after-free and resource leak risk Review by sashiko.dev highlighted potential use after free and resource leak instances. Set se10_pdev to null to prevent use after free Remove DMI call back and instead directly call se10_create_platform_device. Handle error cases appropriately

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: genirq/proc: Size interrupt directory names for 10-digit interrupt numbers /proc/irq/<n>/ CVE-2026-97503 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: genirq/proc: Size interrupt directory names for 10-digit interrupt numbers /proc/irq/<n>/ directory names are built in `char name[10]` buffers with `sprintf(name, "%u", irq)`. Ten-digit IRQ numbers already need 11 bytes including the trailing NUL, and current sparse-IRQ configurations allow interrupt numbers in that range. Size the temporary name buffer for the current decimal form and switch to bounded formatting when creating or removing the proc entry.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: davinci: avoid NULL deref of host->data in IRQ handler mmc_davinci_irq() returns earlCVE-2026-97502 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: mmc: davinci: avoid NULL deref of host->data in IRQ handler mmc_davinci_irq() returns early only when both host->cmd and host->data are NULL: if (host->cmd == NULL && host->data == NULL) { ... return IRQ_NONE; } So we may legitimately reach the rest of the handler with host->data == NULL (and therefore data == NULL). The DATDNE branch already guards against this with an explicit "if (data != NULL)" check, but the subsequent TOUTRD ("read data timeout") and CRCWR/CRCRD ("data CRC error") branches dereference data unconditionally: if (qstatus & MMCST0_TOUTRD) { data->error = -ETIMEDOUT; <-- NULL deref ... davinci_abort_data(host, data); } if (qstatus & (MMCST0_CRCWR | MMCST0_CRCRD)) { data->error = -EILSEQ; <-- NULL deref ... } If either bit is set in qstatus while host->data is NULL, the kernel will crash inside the IRQ handler. smatch flags this: drivers/mmc/host/davinci_mmc.c:933 mmc_davinci_irq() error: we previously assumed 'data' could be null (see line 914) Gate both branches on a non-NULL data, ma

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: paris: bypass pinctrl GPIO layer in set GPIO direction pinctrl_gpio_dirCVE-2026-97501 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: paris: bypass pinctrl GPIO layer in set GPIO direction pinctrl_gpio_direction_input() / pinctrl_gpio_direction_output() take the pinctrl mutex. This causes a gpiochip operations to need to sleep. Worse yet, the .can_sleep field in the gpiochip is not set. This causes the shared GPIO proxy to trip over, as it uses gpiod_cansleep() to check whether it can use a spinlock or needs a mutex. In this case, it ends up taking a spinlock, then calls pinctrl_gpio_direction_output(), which takes a mutex. This causes a huge warning. While this class of Mediatek hardware does not have separate clear/set registers, the pinctrl context has a spinlock that is taken whenever a register read-modify-write is done. Also, once the GPIO function is selected / muxed in, further GPIO operations do not involve pinctrl operations or state. The GPIO direction and level values do not require toggling the pinmux or any other pin config options. Switch to directly calling mtk_pinmux_gpio_set_direction() in the GPIO set direction callbacks to avoid taking the pinctrl mutex. Drop the .gpio_set_direction field in mtk_pmxops t

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: phy: check length before parsing PHY status IE Hardware might report PHY statCVE-2026-97500 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: phy: check length before parsing PHY status IE Hardware might report PHY status IE with unexpected length, and parser might access out of range. Check the length ahead.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: coresight: perf: Retrieve path and source from event data ETM perf callbacks currently useCVE-2026-97499 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: coresight: perf: Retrieve path and source from event data ETM perf callbacks currently use the per-CPU csdev_src pointer, which can race with updates during device registration and unregistration. The AUX setup already builds and stores the path in the event data. Use this path to retrieve the source instead of csdev_src to avoid the race. Export coresight_get_source() and add etm_event_get_ctxt_path() to retrieve the context's path and its source with READ_ONCE() / WRITE_ONCE() accessors. Give the comments to explain why this approach is safe when pause or resume callbacks preempt the disable callback (e.g. via NMI).

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 24, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: pin mqd and fw object bo to avoid eviction mqd and fw objects are queue CVE-2026-97498 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: pin mqd and fw object bo to avoid eviction mqd and fw objects are queue core objects which should remain valid and never be unmapped and evicted for user queues to work properly. During eviction if these buffers are evicted the hw continue to use the invalid addresses and caused page faults and system hung.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Get in touch

Tell us what you're building.

A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.

01The person who'll do the work writes back
02A short call, then a written plan with the price
03Nothing starts until you say yes
04Hacked or down right now? Call, and we pick up the same day
843-331-6339

Not ready to talk yet? Run the free website check and see what Google sees.

What do you need?
Build
Grow
Protect
Urgent

No newsletter, no sales sequence. Just a reply.