Vulnerability database

13,801 results · page 27 of 277

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device hu->CVE-2026-74304 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device hu->serdev is NULL for hci_uart attached via non-serdev paths, but qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev) and dereferences the result, causing a NULL pointer dereference. Fix by guarding the dereference with a NULL check, consistent with the rest of qca_setup().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix FRMR set pinned push error path Add destruction of FRMR handles in case theCVE-2026-74298 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix FRMR set pinned push error path Add destruction of FRMR handles in case the push to the pool fails. This prevents resources leak in case pool page allocation fails.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix undefined shift of user RQ WQE size set_rq_size() computes the RQ WQE size CVE-2026-74297 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix undefined shift of user RQ WQE size set_rq_size() computes the RQ WQE size as "1 << rq_wqe_shift" based on the user-provided rq_wqe_shift, which is only checked to be greater than 32, so shifts of 32 are still accepted. A shift of 31 also overflows a signed integer, leading to undefined behavior. Use check_shl_overflow() to compute the RQ WQE size and reject any invalid values.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: hdac_hdmi: Validate written enum value hdac_hdmi_set_pin_port_mux() uses theCVE-2026-74295 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: hdac_hdmi: Validate written enum value hdac_hdmi_set_pin_port_mux() uses the written enum value to index the texts array before calling snd_soc_dapm_put_enum_double(), which validates that the value is within the enum item range. An out-of-range value can therefore make the driver read past the texts array before the helper rejects the write. Move the lookup after the helper has accepted the value.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry When a read is CVE-2026-72437 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry When a read is retried, raid1_read_request() may be called with a pre-allocated r1_bio. If wait_read_barrier() fails for a REQ_NOWAIT read, the bio is completed and the function returns immediately. In this case the existing r1_bio is leaked. This fixes a leak of pre-allocated r1_bio structures for retried reads.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types Sashiko pointCVE-2026-72436 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Don't use test_bit() in lockless RCU readers in hash types Sashiko pointed out that there are a few lockless RCU readers using test_bit() which is a relaxed atomic operation and provides no memory barrier guarantees. Use test_bit_acquire() instead where the operation may run parallel with add/del/gc, i.e. is not one from the next cases - protected by region lock - in a set destroy phase - in a new/temporary set creation phase

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer() Sashiko pointed out thCVE-2026-72435 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer() Sashiko pointed out that kfree_rcu() was called before rcu_assign_pointer() in handling the comment extension. Fix the order so that rcu_assign_pointer() called first.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: make sure gc is properly stopped Sashiko noticed that when destroying a CVE-2026-72434 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: make sure gc is properly stopped Sashiko noticed that when destroying a set, cancel_delayed_work_sync() was called while gc calls queue_delayed_work() unconditionally which can lead not to properly shutting down the gc.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs() Resetting all VFs causes resouCVE-2026-72425 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs() Resetting all VFs causes resource leak on VFs with FDIR filters enabled as CTRL VSIs are only invalidated and not freed. Fix by using ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which aligns behavior with the ice_reset_vf() function. Reproduction: echo 1 > /sys/class/net/$pf/device/sriov_numvfs ethtool -N $vf flow-type ether proto 0x9000 action 0 echo 1 > /sys/class/net/$pf/device/reset

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Validate NIX maximum LFs correctly NIX maximum number of LFs can be set via CVE-2026-72410 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Validate NIX maximum LFs correctly NIX maximum number of LFs can be set via devlink command but that can be done before assigning any LFs to a PF/VF. The condition used to check whether any LFs are assigned is incorrect. This patch fixes that condition.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: geneve: validate inner network offset in geneve_gro_complete() Even with both paths gated CVE-2026-72407 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 10

  In the Linux kernel, the following vulnerability has been resolved: geneve: validate inner network offset in geneve_gro_complete() Even with both paths gated on gs->gro_hint, geneve_gro_complete() re-derives the inner dispatch type and length from the packet and the current gs->gro_hint, independently of geneve_gro_receive(). The two can disagree if gs->gro_hint flips under a concurrent geneve_quiesce()/ geneve_unquiesce() (sk_user_data is NULL across a synchronize_net()), or if the re-read option bytes differ from the ones receive parsed. geneve_gro_receive() already records the inner network header position in NAPI_GRO_CB()->inner_network_offset. Have geneve_gro_complete() compute the offset it is about to dispatch at, adding ETH_HLEN in the ETH_P_TEB case where eth_gro_complete() steps over the inner MAC header, and bail out if it lands past inner_network_offset. Use a lower bound rather than exact equality: between gh_len and the inner L3 header, geneve_gro_receive() may also have pulled an inner VLAN tag (vlan_gro_receive() advances the recorded offset past it), which only moves inner_network_offset further out. A valid frame therefore always satisfies inner_nh <= inner_ne

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: afs: Fix error code in afs_extract_vl_addrs() The error codes on these paths are only set CVE-2026-72378 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: afs: Fix error code in afs_extract_vl_addrs() The error codes on these paths are only set on the first iteration through the loop. Set the correct error code on every iteration.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: afs: Remove setting of AS_RELEASE_ALWAYS for symlinks and mountpoints Regular AFS files coCVE-2026-72377 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: afs: Remove setting of AS_RELEASE_ALWAYS for symlinks and mountpoints Regular AFS files correctly use afs_file_aops which have release_folio set as netfs_release_folio, so AS_RELEASE_ALWAYS is valid for them when fscache is enabled (set via afs_vnode_set_cache()). Symlinks and mountpoints in AFS use afs_dir_aops, which does not provide a release_folio callback. However, afs_apply_status() unconditionally calls mapping_set_release_always() for these. In such case when memory management code attempts to release folios, filemap_release_folio() checks folio_needs_release() which returns true due to AS_RELEASE_ALWAYS being set. Since there is no release_folio callback, it falls through to try_to_free_buffers(), which at present expects buffer_heads to be not null. For symlinks and mountpoints without buffer_heads, this causes pointer dereference. [dh: Added more bits that were missed]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: afs: Fix the volume AFS_VOLUME_RM_TREE is set on Fix afs_insert_volume_into_cell() to set CVE-2026-72371 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: afs: Fix the volume AFS_VOLUME_RM_TREE is set on Fix afs_insert_volume_into_cell() to set AFS_VOLUME_RM_TREE on the volume replaced, not the new volume, as it's now removed from the cell's volume tree. This will cause the old volume to be removed from the tree twice and the new volume never to be removed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: netfs: Fix writethrough to use collection offload Fix writethrough write to set NETFS_RREQCVE-2026-72365 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: netfs: Fix writethrough to use collection offload Fix writethrough write to set NETFS_RREQ_OFFLOAD_COLLECTION on the request so that collection is processed asynchronously rather than only right at the end - and also so that asynchronous O_SYNC writes get collected at all.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix NPD in bo_meminfo() When a buffer object is purged, its ttm.resource is set toCVE-2026-72359 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix NPD in bo_meminfo() When a buffer object is purged, its ttm.resource is set to NULL via the TTM pipeline gutting flow. However, the BO remains in the client's object list until userspace explicitly closes the GEM handle. If memory stats are queried during this time, accessing bo->ttm.resource->mem_type will result in a NULL pointer dereference. Fix this by safely skipping purged BOs in bo_meminfo, as they no longer consume any memory. User is getting NPD on device resume, and possible theory is that in bo_move(), if we need to evict something to SYSTEM to save the CCS state, but the BO is marked as dontneed, this won't trigger a move but will nuke the pages, leaving us with a NULL bo resource. And the meminfo() doesn't look ready to handle a NULL resource. v2 (Sashiko): - There could potentially be other cases where we might end up with a NULL resource, so make this a general NULL check for now. (cherry picked from commit c9a8e7daa0afe3161111e27fd92176e608c7f186)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: avoid untracked enable work lowpan_enable_set() allocates a temporary CVE-2026-72337 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: 6lowpan: avoid untracked enable work lowpan_enable_set() allocates a temporary work item and schedules do_enable_set() on system_wq, then returns to debugfs. The debugfs active operation has ended at that point, but the worker still executes module text and manipulates enable_6lowpan and listen_chan. bt_6lowpan_exit() removes the debugfs files and immediately closes and puts listen_chan. It has no pointer to the queued work item, so it cannot cancel or flush it before tearing down the state that the worker uses. The buggy scenario involves two paths, with each column showing the order within that path: debugfs enable write module exit 1. lowpan_enable_set() allocates 1. bt_6lowpan_exit() removes set_enable work the debugfs file 2. schedule_work() queues 2. bt_6lowpan_exit() closes do_enable_set() and puts listen_chan 3. the write operation returns 3. module teardown can continue 4. do_enable_set() later runs against stale state Run the enable state transition synchronously in lowpan_enable_set() instead. The simple debugfs setter

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Reject invalid indirect BO handle in indirect CSD setup v3d_get_cpu_indirect_csd_CVE-2026-72327 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Reject invalid indirect BO handle in indirect CSD setup v3d_get_cpu_indirect_csd_params() looks up the indirect buffer object from a userspace-supplied handle but never checks the result. A bogus or stale handle makes drm_gem_object_lookup() return NULL, which is then stored in info->indirect and only dereferenced later when the indirect CSD job runs, turning a userspace mistake into a NULL pointer dereference in the kernel. Bail out with -ENOENT as soon as the lookup fails, so the bad handle is rejected at submission time.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: cifs: validate DFS referral string offsets parse_dfs_referrals() validates that the responCVE-2026-72318 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.4

  In the Linux kernel, the following vulnerability has been resolved: cifs: validate DFS referral string offsets parse_dfs_referrals() validates that the response header and referral array fit in the received buffer, but each referral also contains string offsets supplied by the server. Those offsets are used to compute the DfsPath and NetworkAddress string pointers without checking whether they still point inside the response buffer. A malformed referral can therefore make the computed pointer exceed the end of the buffer. The resulting negative max_len is then passed to cifs_strndup_from_utf16(), and the non-Unicode path forwards it to kstrndup() as a size_t, allowing strnlen() to read out of bounds. Validate each string offset before deriving the string pointer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix VF bringup affecting PF promiscuous state Mbox handling of nix_set_rx_moCVE-2026-72312 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.9

  In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: fix VF bringup affecting PF promiscuous state Mbox handling of nix_set_rx_mode for a VF with promiscuous and all_multi flags set to false causes deletion of the PF's promiscuous and allmulti MCAM rules. This occurs because the APIs that enable/disable these rules operate only on the PF, even when the mbox request is made via a VF interface. Guard both rvu_npc_enable_allmulti_entry() and rvu_npc_enable_promisc_entry() disable paths with an is_vf() check so that a VF bringing up or tearing down its interface cannot inadvertently clear the PF's MCAM rules.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: topology: validate vendor array size before parsing sof_parse_token_sets() readCVE-2026-72300 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: topology: validate vendor array size before parsing sof_parse_token_sets() reads array->size while iterating over topology private data. The loop condition only checks that some data remains, so a malformed topology with a truncated trailing vendor array can make the parser read the size field before a full vendor-array header is available. Validate that the remaining private data contains a complete snd_soc_tplg_vendor_array header before reading array->size. The declared array size check also needs to remain signed. asize is an int, but sizeof(*array) has type size_t, so comparing them directly promotes negative asize values to unsigned and lets them pass the check, as reported in the stable review thread reference below. Cast sizeof(*array) to int when validating the declared array size. This rejects negative, zero and otherwise too-small sizes before the parser dispatches to the tuple-specific code.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: don't leak bad clone into future transaction On memory allocatiCVE-2026-72252 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: don't leak bad clone into future transaction On memory allocation failure the cloned nft_pipapo_match can enter a bad state: - some fields can have their lookup tables resized while others did not - bits might have been toggled - scratch map can be undersized which also means m->bsize_max can be lower than what is required This means that the next insertion in the same batch can trigger out-of-bounds writes. Furthermore, a failure in the first can result in the bad clone to leak into the next transaction because the abort callback is never executed in this case (the upper layer saw an error and no attempt to allocate a transactional request was made). Record a state for the nft_pipapo_match structure: - NEW (pristine clone) - MOD (modified clone with good state) - ERR (potentially bogus content) Then make it so that deletes and insertions fail when the clone entered ERR state. In case the very first insert attempt results in an error, free the clone right away.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: x86/virt/sev: Revert "Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN" Revert 99cf1fCVE-2026-72239 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.3

  In the Linux kernel, the following vulnerability has been resolved: x86/virt/sev: Revert "Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN" Revert 99cf1fb58e68 ("x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN"). Section 8.8 of the SNP spec says: Before invoking SNP_INIT_EX with INIT_RMP set to 1, software must ensure that no CPUs contain dirty cache lines for the memory containing the RMP. Cachelines can be moved from cache to cache in a dirty state. The wbinvd_on_all_cpus() before SNP_INIT_EX flushes the caches for each CPU, but if the IPIs for WBINVD race with this dirty cacheline movement, it is possible that they may not get flushed, violating the firmware requirement. Doing wbinvd_on_all_cpus() before setting SNPEn is safer since the RMP table is not yet in use. [ Heroically bisected by Srikanth. ] [ bp: Massage commit message. ]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs3: validate split-point offset in indx_insert_into_buffer indx_insert_into_buffer() coCVE-2026-72191 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: ntfs3: validate split-point offset in indx_insert_into_buffer indx_insert_into_buffer() computes used = used1 - to_copy - sp_size; memmove(de_t, Add2Ptr(sp, sp_size), used - le32_to_cpu(hdr1->de_off)); where sp and sp_size come from hdr_find_split(). hdr_find_split() walks entries by le16_to_cpu(e->size) without validating that each step stays within hdr->used or that the size field is at least sizeof(struct NTFS_DE). index_hdr_check(), the on-load gatekeeper, only validates header-level fields (used, total, de_off) and does not walk per-entry sizes. A crafted NTFS image whose leaf INDEX_HDR reports used == total but contains one interior NTFS_DE with size = 0xFFF0 therefore passes validation, descends to indx_insert_into_buffer() through the ntfs_create() -> indx_insert_entry() path, and makes hdr_find_split() return an sp whose sp_size (0xFFF0) greatly exceeds the remaining bytes in the buffer. The u32 subtraction underflows and the memmove count becomes a near-4-GiB value, producing an out-of-bounds kernel write that corrupts adjacent allocations and panics the kernel. Reproduced on 7.0.0-rc7 wi

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: irqchip/crossbar: Use correct index in crossbar_domain_free() crossbar_domain_free() resetCVE-2026-72153 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: irqchip/crossbar: Use correct index in crossbar_domain_free() crossbar_domain_free() resets the domain data and then uses the nulled out irq_data->hwirq member as index to reset the irq_map[] entry and to write the relevant crossbar register with a safe entry. That means it never frees the correct index and keeps the crossbar register connection to the source interrupt active. If it would not reset the domain data, then this would be even worse as irq_data->hwirq holds the source interrupt number, but both the map and register index need the corresponding GIC SPI number and not the source interrupt number. This might even result in an out of bounds access as the source interrupt number can be higher than the maximal index space. Fix this by using the GIC SPI index from the parent domain's irq_data.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: sh: rz-dmac: Move interrupt request after everything is set up Once the interruCVE-2026-72146 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: sh: rz-dmac: Move interrupt request after everything is set up Once the interrupt is requested, the interrupt handler may run immediately. Since the IRQ handler can access channel->ch_base, which is initialized only after requesting the IRQ, this may lead to invalid memory access. Likewise, the IRQ thread may access uninitialized data (the ld_free, ld_queue, and ld_active lists), which may also lead to issues. Request the interrupts only after everything is set up. To keep the error path simpler, use dmam_alloc_coherent() instead of dma_alloc_coherent().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Restore SST-PP control to all domains The SST-PP control offset is onlCVE-2026-72143 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Restore SST-PP control to all domains The SST-PP control offset is only restored to power domain 0 after resume. During suspend, control values are read and stored for all power domains. Use pd_info->sst_base instead of power_domain_info->sst_base, which only points to power domain 0 base address.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the hCVE-2026-72129 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and the block backend reads far past the first inline page. num_pages(len) also ignores the offset, so an in-bounds offset whose [off, off+len) span crosses a page boundary under-counts the scatterlist. Map the offset properly: split it into a page index and an in-page offset, start the scatterlist at that page, and size the page count from page_off + len. Because the request scatterlist may now start at inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL identity test in nvmet_rdma_release_rsp() to a range test;

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads CVE-2026-72122 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.3

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silently turning a socket bound to a specific CAN interface into one that also matches "any" interface. Keep the lockless bo->bound check purely as a fast-path reject, and move the ifindex read (and a bo->bound re-check) into the locked section, where every writer already serializes. This removes the possibility of observing the two fields torn against each other, rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs on two independently updated fields. Annotate the now-purely-lockless bo->bound accesses consistently across all its w

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existiCVE-2026-72116 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic transmission re-arming its hrtimer indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer prevents the runaway timer and any injection into a later reused ifindex, since nothing else calls bcm_can_tx() for the op until an explicit TX_SETUP update re-arms it. Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops, the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup() always rejects ifindex 0, so clearing it would strand the op: neither a later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_o

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: validate frame length in bcm_rx_setup() for RTR replies bcm_tx_setup() validatesCVE-2026-72114 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: validate frame length in bcm_rx_setup() for RTR replies bcm_tx_setup() validates cf->len against the CAN/CAN FD DLC limits before installing frames for TX_SETUP, but bcm_rx_setup() never did the same for the RTR-reply frame configured via RX_SETUP with RX_RTR_FRAME.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register bounds before narrowing retval range in check_mem_access() When the BPCVE-2026-72111 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register bounds before narrowing retval range in check_mem_access() When the BPF verifier processes a context load of an LSM hook return value, it calls __mark_reg_s32_range() to narrow the register to the hook's valid range. However, __mark_reg_s32_range() intersects the new range with the register's existing bounds using max_t()/min_t() rather than replacing them. If the destination register carries stale bounds from a prior instruction (e.g. BPF_MOV64_IMM), the intersection can produce a range narrower than reality. The verifier then believes it knows the register's exact value, while at runtime the actual hook return value is loaded, creating a verifier/runtime mismatch that can be used to bypass BPF memory safety checks. The else branch already calls mark_reg_unknown() to reset register state before any narrowing. Apply the same reset in the is_retval path so stale bounds are cleared before __mark_reg_s32_range() intersects.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm-log: fix a bitset_size overflow on 32bit machines Commit c20e36b7631d ("dm log: fix outCVE-2026-72105 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dm-log: fix a bitset_size overflow on 32bit machines Commit c20e36b7631d ("dm log: fix out-of-bounds write due to region_count overflow") made sure that region_count could fit in an unsigned int. But the bitmap memory isn't allocated based on region_count. It uses bitset_size (a size_t variable). The first step of calculating bitset_size is to set it to region_count, rounded up to a multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit architecture, this will make bitset_size wrap around to 0 and fail, despite region_count being valid. Since bitset_size gets divided by 8, it can hold any valid region_count. It just needs a special case to handle the rollover. If it is 0, the value rolled over, and bitset size should be set to the number of bytes needed to hold 2^32 bits.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm-integrity: don't increment hash_offset twice hash_offset is already incremented in the CVE-2026-72099 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: dm-integrity: don't increment hash_offset twice hash_offset is already incremented in the loop "for (i = 0; i < to_copy; i++, ts--)". Do not increment it again.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path If phys_disk->in_reset is set, theCVE-2026-72088 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path If phys_disk->in_reset is set, the function returns directly without undoing the resources acquired for the command. Add the missing error cleanup by unmapping the IOACCEL2 SG chain block when needed, unmapping the SCSI command, and dropping the outstanding IOACCEL command count before returning.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup() The memory allocated for CVE-2026-72087 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup() The memory allocated for mboxq using mempool_alloc() is not freed in some of the early exit error paths. Fix that by moving the mempool_free() call to an earlier point after last use.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix race condition in reset_device sysfs callback The ims_pcu_reset_devicCVE-2026-72075 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix race condition in reset_device sysfs callback The ims_pcu_reset_device() sysfs callback calls ims_pcu_execute_command() without acquiring pcu->cmd_mutex. This can lead to data races and corruption of the shared command buffer if triggered concurrently with other commands. Acquire pcu->cmd_mutex before calling ims_pcu_execute_command().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: ena: clean up XDP TX queues when regular TX setup fails create_queues_with_size_backoCVE-2026-72056 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: ena: clean up XDP TX queues when regular TX setup fails create_queues_with_size_backoff() creates XDP TX queues before setting up the regular TX path. If the subsequent allocation or creation of regular TX queues fails, the error handling paths omit the teardown of the XDP TX queues, leading to a resource leak. Fix this by explicitly destroying the XDP TX queue subset at the two missing failure points. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have an ENA device to test with, no runtime testing was able to be performed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Free BPID bitmap on setup failure nix_setup_bpids() allocates bp->bpids withCVE-2026-72050 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Free BPID bitmap on setup failure nix_setup_bpids() allocates bp->bpids with rvu_alloc_bitmap(), which uses a plain kcalloc(). If any of the following devm_kcalloc() allocations for the BPID mapping arrays fails, the function returns without freeing the bitmap. Free the BPID bitmap before returning from those error paths.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix matcher leak on resize target setup failure hws_bwc_matcher_move() alloCVE-2026-72032 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/mlx5: HWS, fix matcher leak on resize target setup failure hws_bwc_matcher_move() allocates a replacement matcher before setting it as the resize target. If mlx5hws_matcher_resize_set_target() fails, the replacement matcher is not attached anywhere and is leaked. Fix the leak by destroying the replacement matcher before returning from the resize-target failure path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have a mlx5 HWS-capable device to test with, no runtime testing was able to be performed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walkCVE-2026-72029 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walks a chain of aggregated datagram tables using offsets and lengths taken from the modem. first_table_index, next_table_index, table_length, datagram_index and datagram_length are all device supplied le values. Only first_table_index was checked, and only for being non zero. The decoder then formed adth = block + adth_index and read the table header and the datagram entries with no bound against the received skb. A modem that reports an index or a length past the downlink buffer makes the decoder read out of bounds. The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most that, so skb->len is the real limit, but none of these in band offsets were checked against it. The table chain is also followed with no forward progress check. The loop takes the next table from adth->next_table_index and stops only when that reaches zero. A modem can stage two tables that point at each other, so the loop never ends. It runs in softirq and clones the skb on every pass. Validate every device offset and length against skb->len

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure imsic_early_acpi_iniCVE-2026-72026 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure imsic_early_acpi_init() allocates a firmware node before setting up the IMSIC state. If imsic_setup_state() fails, the function returns without freeing the allocated fwnode. Free the fwnode and clear the global pointer on this error path, matching the cleanup already done when imsic_early_probe() fails. [ tglx: Use a common cleanup path instead of copying code around ]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ipvs: use parsed transport offset in SCTP state lookup set_sctp_state() reads the SCTP chuCVE-2026-72021 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.2

  In the Linux kernel, the following vulnerability has been resolved: ipvs: use parsed transport offset in SCTP state lookup set_sctp_state() reads the SCTP chunk header again in order to drive the IPVS SCTP state table. For IPv6 it computes the offset with sizeof(struct ipv6hdr), while the surrounding IPVS code uses iph.len from ip_vs_fill_iph_skb(), where ipv6_find_hdr() has already skipped extension headers and found the real transport header. This makes the state machine read from the wrong offset for IPv6 SCTP packets that carry extension headers. For example, an INIT packet with an 8-byte destination options header can be scheduled correctly by sctp_conn_schedule(), but set_sctp_state() reads the first byte of the SCTP verification tag as a DATA chunk type. The connection then moves from NONE to ESTABLISHED instead of INIT1, gets the longer established timeout, and updates the active/inactive destination counters incorrectly. This happens even though the SCTP handshake has not completed. Use the parsed transport offset passed down from ip_vs_set_state() for the SCTP chunk-header lookup. For IPv4 and IPv6 packets without extension headers this preserves the existing offset.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ipvs: reset full ip_vs_seq structs in ip_vs_conn_new Commit 9a05475cebdd ("ipvs: avoid kmeCVE-2026-72020 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: ipvs: reset full ip_vs_seq structs in ip_vs_conn_new Commit 9a05475cebdd ("ipvs: avoid kmem_cache_zalloc in ip_vs_conn_new") changed ip_vs_conn_new() to allocate an ip_vs_conn object with kmem_cache_alloc(). The function then initializes many fields explicitly, but only resets in_seq.delta and out_seq.delta in the two struct ip_vs_seq members. That leaves init_seq and previous_delta uninitialized. This is normally harmless while the corresponding IP_VS_CONN_F_IN_SEQ or IP_VS_CONN_F_OUT_SEQ flag is clear. For connections learned from a sync message, however, ip_vs_proc_conn() preserves those flags from IP_VS_CONN_F_BACKUP_MASK and passes opt=NULL when the message omits IPVS_OPT_SEQ_DATA. In that case the new connection can be hashed with SEQ flags set but with the rest of in_seq/out_seq still containing stale slab data. When a packet for such a connection is later handled by an IPVS application helper, vs_fix_seq() and vs_fix_ack_seq() use previous_delta and init_seq to rewrite TCP sequence numbers. A malformed sync message can therefore make forwarded packets carry stale slab bytes in their TCP seq/ack num

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: macsec: don't read an unset MAC header in macsec_encrypt() macsec_encrypt() reads the EtheCVE-2026-72019 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.3

  In the Linux kernel, the following vulnerability has been resolved: macsec: don't read an unset MAC header in macsec_encrypt() macsec_encrypt() reads the Ethernet header via eth_hdr(skb) (skb->head + skb->mac_header) to memmove() the 12 source/destination MAC bytes forward and make room for the SecTAG. On the AF_PACKET SOCK_RAW + PACKET_QDISC_BYPASS transmit path the skb reaches the macsec ndo_start_xmit() with the MAC header unset, so eth_hdr(skb) resolves to skb->head + (u16)~0 and the read is out of bounds: a 12-byte heap over-read that is also emitted on the wire as the frame's outer source/destination MAC. KASAN reports a slab-out-of-bounds read in macsec_start_xmit() on 6.0; on current mainline a CONFIG_DEBUG_NET build flags it as an unset mac header in skb_mac_header(). On the TX path the L2 header is at skb->data, so use skb_eth_hdr(), added by commit 96cc4b69581d ("macvlan: do not assume mac_header is set in macvlan_broadcast()") for exactly this purpose.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dibs: loopback: validate offset and size in move_data() The loopback move_data() performs CVE-2026-72018 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dibs: loopback: validate offset and size in move_data() The loopback move_data() performs a memcpy into the registered DMB without checking whether offset + size exceeds the DMB length. Unlike real ISM hardware, which enforces memory region bounds natively, the software loopback has no such protection. A peer-supplied out-of-bounds offset or oversized write would result in an OOB write past the allocated kernel buffer. Add an explicit bounds check before the memcpy to reject such requests with -EINVAL.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: rebind mm mempolicy to effective_mems, not mems_allowed Creating a child cpCVE-2026-72010 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: rebind mm mempolicy to effective_mems, not mems_allowed Creating a child cpuset where cpuset.mems is never set leads to a div/0 when a VMA mempolicy with MPOL_F_RELATIVE_NODES rebinds in response to a CPU hotplug event. Reproduction steps: 1) Create a cgroup w/ cpuset controls (do not set cpuset.mems) 2) Move the task into the child cpuset 3) Create a VMA mempolicy for that task with MPOL_F_RELATIVE_NODES 4) unplug and hotplug a cpu echo 0 > /sys/devices/system/cpu/cpu1/online echo 1 > /sys/devices/system/cpu/cpu1/online 5) mempolicy rebind does a div/0 in mpol_relative_nodemask on the call to __nodes_fold() The cpuset code passes (cs->mems_allowed) which is not guaranteed to have nodes to the rebind routine. Use cs->effective_mems instead, which is guaranteed to have a non-empty nodemask once we reach that code path. [ david: add a comment, slightly rephrase description ]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: avoid full teardown before work setup in probe rt2x00lib_probe_dev() uses thCVE-2026-72005 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00: avoid full teardown before work setup in probe rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for all probe failures. However, drv_data allocation and workqueue allocation can fail before intf_work, autowakeup_work and sleep_work have been initialized. Do not enter the full remove path until the probe has reached the point where those work items are set up. Return directly for drv_data allocation failure, and use a small early cleanup path for workqueue allocation failure. This issue was found by our static analysis tool and then confirmed by manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The early probe exits should not call a common teardown path that assumes the later work setup has already completed. A QEMU PoC forced alloc_ordered_workqueue() to fail before the work initializers are reached. The resulting fail path entered rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ipvs: fix more places with wrong ipv6 transport offsets Sashiko reports for more incorrectCVE-2026-68477 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: ipvs: fix more places with wrong ipv6 transport offsets Sashiko reports for more incorrect IPv6 transport offsets. The app code for TCP was assuming IPv4 network header even after the ipvsh argument was provided. This can cause problems with apps over IPv6. As for the only official app in the kernel tree (FTP) this problem is harmless because we use Netfilter to mangle the FTP ports and we do not adjust the TCP seq numbers. Also, provide correct offset of the ICMPV6 header in ip_vs_out_icmp_v6() for correct checksum checks when the IPv6 packet has extension headers.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: reset: sunxi: fix memory region leak on ioremap failure In sunxi_reset_init(), when ioremaCVE-2026-68475 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: reset: sunxi: fix memory region leak on ioremap failure In sunxi_reset_init(), when ioremap() fails, the memory region obtained via request_mem_region() is not released, leading to a resource leak. Add an err_mem_region label to properly release the memory region before freeing the data structure.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.