Vulnerability database

25,335 results · page 23 of 507

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: openvswitch: avoid reallocating confirmed conntrack labels ovs_ct_get_conn_labels() adds tCVE-2026-98251 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: openvswitch: avoid reallocating confirmed conntrack labels ovs_ct_get_conn_labels() adds the labels extension when a conntrack entry does not have one. Confirmed conntracks can be read locklessly, so adding an extension may reallocate and free the extension block while another CPU accesses it. Only add the extension for unconfirmed conntracks. A confirmed conntrack without labels now fails the caller's label operation instead of reallocating its extension storage.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: fix handling of NFSEXP_PNFS in the netlink codepath The rework of how block layouts CVE-2026-98250 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: nfsd: fix handling of NFSEXP_PNFS in the netlink codepath The rework of how block layouts were checked moved the check for NFSEXP_PNFS out of nfsd4_setup_layout_type() and into the callers. That patch didn't account for the new call in nfsd4_setup_layout_type().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: pass HVC_SET_VECTORS args to the resume hvc swsusp_arch_suspend_exit() rCVE-2026-98249 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: arm64: hibernate: pass HVC_SET_VECTORS args to the resume hvc swsusp_arch_suspend_exit() reinstalls the restored kernel's hyp stub vectors with an hvc, but never passes the arguments. x0 is not set to HVC_SET_VECTORS and x1 is not set to the vector address, so the stub dispatch falls through and returns without writing vbar_el2. EL2 is left pointing at the trans_pgd copy of the vectors, a page that swsusp_free() releases right after resume. Set the arguments up the same way __hyp_set_vectors() does. Without this fix, Vladimir was able to trigger a hang when resuming from hibernation with CONFIG_PAGE_POISONING=y and page_poison=on.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: arm64: percpu: Fix LSE operations on {8,16}-bit types The assembly for __percpu_##name##_cCVE-2026-98248 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: arm64: percpu: Fix LSE operations on {8,16}-bit types The assembly for __percpu_##name##_case_##sz() and __percpu_##name##_return_case_##sz() doesn't use the 'sfx' macro argument to form the LSE instruction. Without 'sfx', a W register argument will imply a 32-bit memory location, and consequently {8,16}-bit ops will erroneously read and write 32 bits of memory when the LSE instruction is used. Fix this by appending 'sfx' to 'op_lse' to LSE instruction. It is not necessary (and not valid) to append 'sfx' to 'op_llsc', as 'op_llsc' is a register-register operation which does not access memory (and does not take a size suffix).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_codec: validate vendor codec count length The Read Local Supported Codecs pCVE-2026-98247 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_codec: validate vendor codec count length The Read Local Supported Codecs parsers consume the variable-sized standard codec array before parsing the vendor codec count. Although the initial reply-size check includes a vendor count byte in the fixed layout, it does not guarantee that the byte remains after the standard codec array. If a controller reply ends immediately after that array, calculating the vendor codec array size reads vnd_codecs->num beyond the skb data. Use skb_pull_data() to validate and consume each codec header before using its count in both command variants.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Serialize local codec list cleanup hci_dev_close_sync() clears hdev->CVE-2026-98246 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Serialize local codec list cleanup hci_dev_close_sync() clears hdev->local_codecs after releasing hdev->lock. Codec list additions and both traversals in sco_sock_getsockopt() use that lock, but the close path does not. A close and BT_CODEC query can therefore interleave as follows: hci_dev_close_sync() sco_sock_getsockopt() hci_dev_lock() fetch codec entry hci_codec_list_clear() kfree(entry) read entry->id The reader then accesses an entry which the close path has freed. KASAN BUG: KASAN: slab-use-after-free in sco_sock_getsockopt+0xfa0/0xfe0 Read of size 1 at addr ffff8881001c3450 Call Trace: sco_sock_getsockopt+0xfa0/0xfe0 do_sock_getsockopt+0x537/0x7b0 __sys_getsockopt+0xf2/0x170 Allocated by task 92: hci_codec_list_add.isra.0+0x2c/0x440 hci_read_codec_capabilities+0x224/0x590 hci_read_supported_codecs+0x2c2/0x640 Freed by task 92: kfree+0x131/0x3c0 hci_codec_list_clear+0xd8/0x160 hci_dev_close_sync+0x92a/0xfa0 Take hdev->lock around the

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: take commit root semaphore when iterating in mark_block_group_to_copy() mark_block_CVE-2026-98245 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: btrfs: take commit root semaphore when iterating in mark_block_group_to_copy() mark_block_group_to_copy() iterates over the commit root with skip_locking=true. A concurrent transaction commit can swap and free the commit root during iteration, causing use-after-free when accessing extent buffers. Fix it by using path->need_commit_sem to protect the commit root search.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: clear free space tree creation state on rebuild failure btrfs_rebuild_free_space_trCVE-2026-98244 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: btrfs: clear free space tree creation state on rebuild failure btrfs_rebuild_free_space_tree() sets BTRFS_FS_CREATING_FREE_SPACE_TREE before rebuilding the free space tree. Several error paths return without clearing this flag. The transaction restart failure path can leave the flag set on a live filesystem, causing delayed reference processing to be skipped. Clear it on all free space tree rebuild failure paths. Keep BTRFS_FS_FREE_SPACE_TREE_UNTRUSTED set, since a failed rebuild leaves the free space tree untrusted. Callers must fall back to extent-tree caching.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: dma-buf/dma-fence: fix checking signaling bit for timeline and driver name v3 The patch "dCVE-2026-98243 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: dma-buf/dma-fence: fix checking signaling bit for timeline and driver name v3 The patch "dma-buf: dma-fence: Fix potential NULL pointer dereference" changed the check to test for the ops pointer instead of the signaled bit to avoid a potential NULL dereference when the ops pointer has been cleared. The problem is now that the ops pointer is cleared only when neither the release nor the wait callback is implemented and this isn't true for a lot of dma_fence implementations yet. So those implementations lost the RCU protection after signaling of the returned string resulting in potential use after free. Add the signaling check additional to the ops pointer check so that we have both the protection against NULL dereference as well as the RCU protection after signaling for the returned string. v2: improve comments to note RCU protection and explain why we check both signaling state and ops pointer v3: some comment improvements suggested by Philip

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: dma-buf: Fix silent overflow for phys vec to sgt In case MMIO size is bigger than 4G and pCVE-2026-98242 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dma-buf: Fix silent overflow for phys vec to sgt In case MMIO size is bigger than 4G and peer2peer DMA goes through host bridge, we trigger a code path that assigns the total linked IOVA (which is greater than 4G) to mapped_len. Previously, `mapped_len` was declared as 32-bit `unsigned int`. When accumulating `size_t` lengths, this leads to a silent wrap-around. This truncation causes truncated lengths to be passed to functions like `fill_sg_entry()`. Fix this by changing `mapped_len` to `size_t` (64-bit). While at it, fix similar potential overflow issues in `calc_sg_nents` by using `check_add_overflow()` for `nents` and using `unsigned int` for the loop iterator in `fill_sg_entry` to match.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm: use full sockets in local error paths xfrm6_local_rxpmtu() and xfrm6_local_errCVE-2026-98241 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm: use full sockets in local error paths xfrm6_local_rxpmtu() and xfrm6_local_error() dereference skb->sk as if it always pointed at a full IPv6 socket. That is not guaranteed. TCP SYN-ACK skbs can be owned by a TCP_NEW_SYN_RECV request_sock while the output path itself is driven by the full listener. If rerouting selects an IPv6 XFRM tunnel route with a lower MTU, the local PMTU/error handling path can reach these callbacks with that mini-socket still attached to the skb. The callbacks then miscast the request socket as a full inet/IPv6 socket and can read beyond the request_sock allocation when they access inet_sock or ipv6_pinfo state. Resolve the owner with skb_to_full_sk() in both callbacks and bail out when no full socket is attached. This matches the surrounding XFRM IPv6 PMTU/error logic, which already reasons about full sockets with skb_to_full_sk().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: initialize `options_len` before referencing options The following command CVE-2026-98240 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: initialize `options_len` before referencing options The following command triggers a kernel panic: ip link add d0 type dummy; ip link set d0 up ip route add 10.30.0.0/16 \ encap ip id 300 geneve_opts 4660:66:11223344 dev d0 memcpy: detected buffer overflow: 4 byte write of buffer size 0 kernel BUG at lib/string_helpers.c:1044! ... ip_tun_parse_opts.part.0.cold+0x10/0x10 ip_tun_build_state+0x116/0x2a0 On kernels built with GCC 15+ and `CONFIG_FORTIFY_SOURCE`, the fortified `memcpy()` got 0 sized destination with request of 4 bytes length: static int ip_tun_parse_opts_geneve(...) { ... attr = tb[LWTUNNEL_IP_OPT_GENEVE_DATA]; data_len = nla_len(attr); /* == 4 */ struct geneve_opt *opt = ip_tunnel_info_opts(info) + opts_len; memcpy(opt->opt_data, nla_data(attr), data_len); /* ^^^^^^^^^^^^^ 0 since options_len is assigned afterwards */ Fixed by initializing the counter before the options are referenced. Matching what `tunnel_key_opts_set()` already does.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix RX checksum use-after-free lan743x_rx_process_buffer() adds each non-firCVE-2026-98239 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix RX checksum use-after-free lan743x_rx_process_buffer() adds each non-first receive buffer to the head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb() linearizes the head and frees the fragment skb metadata. The checksum-success path then writes ip_summed through the local skb pointer, which still points to the final fragment. This causes a use-after-free write when a packet spans more than one receive buffer. Set ip_summed on the surviving head skb instead. Multi-buffer receive can occur after a live MTU increase because existing ring entries keep their old buffer size until they are replenished. A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer packet produced a one-byte KASAN use-after-free write before this change. The same test passed after the change. The driver object also builds with W=1. This was not tested on physical LAN743x hardware.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: validate the netif index in t7xx_ccmni_recv_skb() The netif index carriedCVE-2026-98238 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: validate the netif index in t7xx_ccmni_recv_skb() The netif index carried in the DPMAIF PIT header is five bits wide, but ccmni_inst[] only has room for NIC_DEV_MAX (21) entries. t7xx_ccmni_recv_skb() indexes the array without a bounds check, so indexes 21 to 31 read past it. The out-of-bounds value lands in the callback table that follows the array, which is never NULL, so the existing !ccmni check does not catch it and the driver dereferences whatever sits there as a struct t7xx_ccmni. Drop the skb when the index is out of range. Verified in a QEMU guest with a fault injector setting the netif index to 25: the unpatched driver reads a value past ccmni_inst[], which lands in the callback table, and dereferences it far enough to queue the skb. With this check the packet is dropped. Well-formed traffic on index 0 is unaffected. Changes in v2: none.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: wwan: mhi_wwan_mbim: guard against a cyclic NDP chain The NDP traversal in mhi_mbim_rCVE-2026-98237 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: wwan: mhi_wwan_mbim: guard against a cyclic NDP chain The NDP traversal in mhi_mbim_rx() only stops when wNextNdpIndex is zero. Nothing requires the offsets to advance, so a modem that points an NDP at itself, or at an earlier NDP, keeps the loop spinning forever on one CPU. Break out when the next NDP offset is not larger than the current one. Verified in a QEMU guest with a fault injector feeding the driver's receive callback an NTB whose single NDP points at itself: the unpatched driver spins in mhi_mbim_rx() with one CPU pinned at 100% and the thread never returns. With this check the loop terminates within one iteration. Changes in v2: move the non-increasing check to the wNextNdpIndex retrieval site, as suggested by Loic Poulain, instead of tracking the previous offset in a separate variable.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: wwan: mhi_wwan_mbim: check skb_copy_bits() return value mhi_mbim_rx() ignores the retCVE-2026-98236 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: wwan: mhi_wwan_mbim: check skb_copy_bits() return value mhi_mbim_rx() ignores the return value of skb_copy_bits() when it copies each datagram out of the NTB. The datagram offset and length come from the DPE, which is only checked to lie within the NTB itself, so a modem can point a datagram outside the received skb. The copy then fails and the freshly allocated skbn is passed to netif_rx() with its uninitialized contents still in place, leaking kernel heap memory into the network stack. Free the skb and account an error when the copy fails. Verified in a QEMU guest with a fault injector pointing a DPE outside the received NTB: the copy fails, and the unpatched driver hands the uninitialized skbn to the network stack (observed as "unknown protocol" on bytes that were never written). With this check the failed datagram is dropped and counted as an rx error. Changes in v2: factor the free-and-count sequence out into mhi_mbim_rx_drop(), shared with the unknown-protocol path, as suggested by Loic Poulain.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: release tail references on DELACTION failure A batched RTM_DELACTION rCVE-2026-98235 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/sched: act_api: release tail references on DELACTION failure A batched RTM_DELACTION request takes a temporary reference on each action before attempting any deletion. tcf_action_delete() clears each processed slot and drops its temporary reference before attempting the deletion. If deletion fails, tca_action_gd() calls tcf_action_put_many() to release the remaining references, but its tcf_act_for_each_action() iterator stops at the first NULL slot. When a batch stops at an action bound to a filter, this leaks a reference on each subsequent action. A later delete of an unbound action can then return success without removing it from the IDR. Walk the full array in tcf_action_put_many() and skip NULL slots to release the references held on the unprocessed actions.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: cap hh_flows_limit at change time hhf_change() stores TCA_HHF_HH_FLOWS_LIMCVE-2026-98234 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: cap hh_flows_limit at change time hhf_change() stores TCA_HHF_HH_FLOWS_LIMIT with no upper bound. A huge hh_flows_limit lets each new heavy-hitter flow pass the hh_flows_current_cnt check in alloc_new_hh() and forces a fixed-size kzalloc(GFP_ATOMIC) per flow under spoofed traffic, for unbounded memory growth. Bound the attribute with NLA_POLICY_MAX() at 2*HH_FLOWS_CNT (the hhf_init() default) and report the rejected value via extack. The deprecated nested parse is kept: legacy tc does not set NLA_F_NESTED on TCA_OPTIONS. Configs relying on hh_limit above the default were relying on unbounded, unsafe behaviour and are not supported going forward. hhf_init() also ran hhf_change() before setting the default hh_flows_limit, so a user-supplied hh_limit at add time was clobbered back to 2048. Set the default before hhf_change() so the configured value sticks. This is a follow-up to commit eb56a495f59b ("net/sched: hhf: clamp quantum in change and init paths"), which bounded the quantum of the same qdisc; the hh_flows_limit bound is the remaining unbounded knob of that series' scope. Conditions to re

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net/packet: clear RX owner on VNET header error Commit 61fad6816fc1 ("net/packet: tpacket_CVE-2026-98233 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/packet: clear RX owner on VNET header error Commit 61fad6816fc1 ("net/packet: tpacket_rcv: avoid a producer race condition") added rx_owner_map and made tpacket_rcv() claim a V1 or V2 ring slot before converting the virtio-net header. If the conversion fails, the drop path leaves the slot claimed. With a one-frame TPACKET_V2 ring, an unsupported UDP GSO packet leaves the only slot unavailable, so the ring also drops the next valid packet. Clear the ownership bit on this error path. TPACKET_V3 already clears its block state here.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable() scsi_cdl_enable() uses lengthCVE-2026-98232 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable() scsi_cdl_enable() uses length fields returned by MODE SENSE to locate the ATA feature mode page in a 64-byte stack buffer. A target can report a total length shorter than its mode header and block descriptors. The unsigned subtraction used for the MODE SELECT length can wrap, and the separately computed buf_data can point beyond buf. During automatic scan, enable is false, so the read-modify-write of buf_data[4] can clear the low two bits of a target-selected out-of-bounds stack byte. scsi_mode_select() can then copy up to 64 bytes from outside the buffer into the outgoing MODE SELECT payload, disclosing stack contents to the target. This is reachable while scanning a USB storage device that identifies as an ATA device and advertises CDL support. No filesystem mount or userspace access to the block device is required. On upstream commit cee9395acd80 ("Linux 7.3-rc1"), a build-specific, one-vCPU QEMU/Raw Gadget proof using QEMU-only multi-UDC allocator sampling executed a fixed proof command inside the guest and created a UID-0-owned marker during aut

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: xfrm: serialize state GC with device state flush The deferred-device pass in xfrm_dev_statCVE-2026-98231 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: xfrm: serialize state GC with device state flush The deferred-device pass in xfrm_dev_state_flush() finds states under xfrm_state_dev_gc_lock, but drops the lock before calling xfrm_dev_state_free() because the driver callback may sleep. The device GC list does not hold an xfrm_state reference, so the state GC worker can destroy the same state concurrently. The race can proceed as follows: CPU 0 CPU 1 find x on the device GC list drop xfrm_state_dev_gc_lock read x->xso.dev xfrm_state_gc_destroy(x) xfrm_dev_state_free(x) xfrm_state_free(x) continue xfrm_dev_state_free(x) Both paths can invoke the driver callback and drop the device reference. CPU 0 can also access the xfrm_state after CPU 1 has freed it. KASAN reported: BUG: KASAN: slab-use-after-free in xfrm_dev_state_free+0x24c/0x2a0 Read of size 8 at addr ffff88810bbaa960 by task poc/102 Call Trace: xfrm_dev_state_free+0x24c/0x2a0 xfrm_dev_state_flush+0x353/0x400 xfrm_dev_event+0x26d/0x3a

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: xfrm: use hlist_del_init_rcu for state_cache and state_cache_input Commit 14acf9652e56 ("xCVE-2026-98230 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: xfrm: use hlist_del_init_rcu for state_cache and state_cache_input Commit 14acf9652e56 ("xfrm: defensively unhash xfrm_state lists in __xfrm_state_delete") converted bydst/bysrc/byseq/byspi from hlist_del_rcu() to hlist_del_init_rcu() so that a second __xfrm_state_delete() on the same object becomes a no-op rather than a write through LIST_POISON pprev. It missed state_cache and state_cache_input, which kept hlist_del_rcu(): - hlist_del_rcu() leaves pprev = LIST_POISON2 (non-NULL), so hlist_unhashed() returns false. - hlist_del_init_rcu() leaves pprev = NULL, so hlist_unhashed() returns true. A second __xfrm_state_delete() therefore enters __hlist_del() on the already-deleted state_cache/state_cache_input nodes and does WRITE_ONCE(*pprev, next) through LIST_POISON2 — a write use-after-free once the slab is reused. The corruption can in turn cause a subsequent hlist_for_each_entry_rcu traversal to follow a dangling next pointer, producing the read use-after-free reported in xfrm_input_state_lookup(). Switch state_cache and state_cache_input to hlist_del_init_rcu() to match the other four lists, closing the

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: xfrm: save input state data before secpath resets xfrm_input() stores the current xfrm_staCVE-2026-98229 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: xfrm: save input state data before secpath resets xfrm_input() stores the current xfrm_state in the skb secpath while it continues receive-side processing. Some input paths can reset that secpath before xfrm_input() has finished dereferencing the state. Receive callback users such as VTI and XFRM interfaces can reset the secpath. The VTI receive path does so before checking whether the packet crosses network namespaces, while the XFRM interface path does so only for cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also reset the secpath before the final drop callback reports the current state's protocol. If secpath_reset() drops the last state reference while the state is concurrently deleted, xfrm_input() can still dereference the freed state when selecting transport_finish() or reporting the drop callback protocol. Save the state protocol on the stack while the state is still valid, and use the already saved address family for transport_finish(). A larval XFRM_STATE_ACQ state has no type, so retain nexthdr as its protocol. This preserves the existing drop-path fallback while avoiding the po

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ On I6500 CPU cores, lld aCVE-2026-98228 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ On I6500 CPU cores, lld and scd give no ordering guarantees (same as all other instructions). To respect the assumption that arch_cmpxchg() is fully ordered, we must inject sync instructions above and below our lld/scd loops using the already in place WEAK_REORDERING_BEYOND_LLSC infrastructure. Otherwise, bad things can happen: [ 34.054496] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000000, epc == a80000080838e01c, ra == a80000080838dfc4 [ 34.054559] Oops[#1]: [ 34.069561] CPU: 3 UID: 0 PID: 170 Comm: pipe_race Not tainted 7.2.0-rc6-01553-gb73c35220968-dirty #103 VOLUNTARY [ 34.079932] Hardware name: Mobile EyeQ5 MP5 Evaluation board [ 34.085592] $ 0 : 0000000000000000 0000000000000001 0000000000000000 0000000000000000 [ 34.093616] $ 4 : a800000808ee2618 000000000b7a879d 0000000000001000 0000000000000000 [ 34.101638] $ 8 : 0000000000e3f2c9 0000000000000000 a800000808a2a9f8 0000000000000000 [ 34.109660] $12 : a8000008139ffcd8 ffffffff84080018 a80000080837fae0 7878787878787878 [ 34.117682] $16

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: memstick: ms_block: destroy io_queue workqueue on removal msb_init_disk() creates the per-CVE-2026-98227 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: memstick: ms_block: destroy io_queue workqueue on removal msb_init_disk() creates the per-card ordered workqueue msb->io_queue with alloc_ordered_workqueue(). It is torn down with destroy_workqueue() only on the init error path; msb_remove() never destroys it. msb_stop() merely flushes the queue, and neither msb_data_clear() nor put_disk() free it. As a result every card insert/remove cycle leaks the workqueue and its kworker, exhausting kernel memory over repeated cycles. Destroy the workqueue in msb_remove() after the disk has been removed and the queue drained.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count SWAP_USAGE_OFFLIST_BICVE-2026-98226 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter, and is meant to sit above any value that counter can reach. However, it is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system with 4 KiB pages the flag collides with the usage count once that count reaches 4 TiB. swap_usage_in_pages() masks bit 30 out, so whenever the real count has that bit set, every caller of it reads 4 TiB low: * /proc/swaps understates Used by 4 TiB. * A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its "if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff tears the device down while pages are still swapped out. Nothing in the rest of swapoff aborts the teardown, so those pages are lost. Independently of swapoff, the collision also corrupts the counter and the plist. On a device in normal use, a free that leaves bit 30 set in the count makes swap_usage_sub() see the flag where there is only count, and call add_to_avail_list(). It clears the bit with fetch_and(~SWAP_USAGE_OFFLIST_BIT), leav

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mm/shrinker: fix bogus set_shrinker_bit() with cgroup.memory=nokmem With cgroup.memory=nokCVE-2026-98225 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm/shrinker: fix bogus set_shrinker_bit() with cgroup.memory=nokmem With cgroup.memory=nokmem, shrinker_memcg_alloc() bails out early and never allocates an id, so shrinker->id keeps the 0 it got from the kzalloc() in shrinker_alloc(). __list_lru_init() then copies that 0 into lru->shrinker_id, where it looks like a valid bit index. Nothing calls expand_shrinker_info() on nokmem either, so shrinker_nr_max stays 0 and every memcg ends up with an empty map (map_nr_max == 0). deferred_split_folio() hands a real memcg to __list_lru_add() regardless of whether the lru is memcg aware, so the first THP queued in a cgroup does set_shrinker_bit(memcg, nid, 0) and trips the bounds check: WARNING: mm/shrinker.c:212 at set_shrinker_bit+0x7d/0x90, CPU#126 Call Trace: <TASK> deferred_split_folio+0x18c/0x220 map_anon_folio_pmd_nopf+0xdd/0x130 map_anon_folio_pmd_pf+0x14/0xb0 do_huge_pmd_anonymous_page+0x1a1/0x620 __handle_mm_fault+0xea9/0x10d0 handle_mm_fault+0xe5/0x320 do_user_addr_fault+0x1cc/0x870 exc_page_fault+0x81/0x1b0 asm_exc_page_fault+0x27/0x30 </TASK> Harmless, the WARN_ON_ONCE() is what keeps the out

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mm/vma: correctly unaccount on mmap_prepare() failure __mmap_setup() accounts memory for rCVE-2026-98224 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm/vma: correctly unaccount on mmap_prepare() failure __mmap_setup() accounts memory for relevant mappings via: security_vm_enough_memory_mm() -> __vm_enough_memory() -> vm_acct_memory() If __mmap_setup() fails, this indicates that this accounting did not take place, and thus it's appropriate for __mmap_region() to jump to abort_munmap. However if call_mmap_prepare() fails, it also jumps there and any accounted memory is not correctly unaccounted. Fix this by handling each error separately.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mm: filemap: retain mapped dropbehind folios Fault-around can map ready dropbehind folios CVE-2026-98223 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm: filemap: retain mapped dropbehind folios Fault-around can map ready dropbehind folios without going through the normal page-cache lookup that clears dropbehind. A mapping represents a competing cached user, so retain the folio instead of forcibly unmapping it when writeback completes. For a mapped folio, folio_unmap_invalidate() can call unmap_mapping_folio(), which takes i_mmap_rwsem and may sleep. Retaining mapped folios avoids this path when folio_end_dropbehind() runs in non-preemptible task context. Tal was able to trigger a sleeping-in-atomic warning due to this [1]. Unmapped dropbehind folios continue through the existing invalidation path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: KEYS: encrypted: fix integer overflow of datablob_len encrypted_key_alloc() stores databloCVE-2026-98222 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: KEYS: encrypted: fix integer overflow of datablob_len encrypted_key_alloc() stores datablob_len in a u16. It is computed from multiple string and payload lengths. If the result exceeds U16_MAX, the assignment truncates the allocation size. KASAN reports a 32760-byte slab-out-of-bounds write when __ekey_init() copies the master key description into the undersized buffer. The total payload length stored in key->datalen is also a u16. Use check_add_overflow() to reject values that do not fit either destination, and use kzalloc_flex() for the flexible-array allocation.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix tpm2_load_cmd() boundary check tpm2_load_cmd() does boundary checks agaCVE-2026-98221 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix tpm2_load_cmd() boundary check tpm2_load_cmd() does boundary checks against the ASN.1 size i.e., payload->blob_len. Address this by passing the decoded blob size to tpm2_load_cmd(), and use it for the boundary checks.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix NULL sched deref in kfunc sub-sched error paths When the root scheduler hasCVE-2026-98220 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix NULL sched deref in kfunc sub-sched error paths When the root scheduler has sub-scheds attached, the COMPAT kfunc wrappers scx_bpf_select_cpu_and() and scx_bpf_dsq_insert_vtime() refuse the call and report to @p's scheduler: scx_error(scx_task_sched(p), "... must be used"); The wrappers are reachable with tasks that have no scheduler. scx_bpf_select_cpu_and() is in the select_cpu kfunc group, which scx_kfunc_context_filter() opens to BPF_PROG_TYPE_SYSCALL programs; scx_bpf_dsq_insert_vtime() is in the enqueue_dispatch group, which ops.enqueue() and ops.dispatch() may call with any KF_RCU task -- the group has no kf_tasks validation, and scx_dsq_insert_preamble() checks task ownership with scx_task_on_sched() precisely because @p may be an arbitrary task. scx_task_sched(p) is p->scx.sched, which is NULL for tasks past sched_ext_dead() -- which clears it via scx_disable_and_exit_task() on exit -- and for idle tasks, which the enable paths skip as they are never scheduled through SCX. It is also an rcu_dereference_protected() that expects @p's pi_lock or rq lock, which neither wrapper holds. Passi

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: sched_ext: Close the pre-enable ops error claim window scx_alloc_and_add_sched() publishesCVE-2026-98219 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: sched_ext: Close the pre-enable ops error claim window scx_alloc_and_add_sched() publishes ops->priv before scx_root_enable_workfn() switches the state to SCX_ENABLING. An error claimed via scx_bpf_error_bstr() from an associated BPF program in that window is consumed by scx_disable_workfn(), which takes the pre-enable shortcut in scx_root_disable(). The shortcut returns without any teardown and restores SCX_DISABLED with an unconditional scx_set_enable_state() xchg racing the enable workfn's own transition. The enable then completes with the claim consumed: the scheduler stays up but can never be disabled again, and bpf_scx_unreg() frees it while still in use, resulting in a use-after-free. Both WARN_ON_ONCE()s fire back to back: WARNING: kernel/sched/ext/ext.c:7522 at scx_root_enable_workfn+0xeec/0x1be0, CPU#3: scx_enable_help/276 WARNING: kernel/sched/ext/ext.c:6398 at scx_root_disable+0xb50/0xdb8, CPU#0: sched_ext_helpe/664 scx_root_enable_workfn() switches to SCX_ENABLING before the scheduler allocation, so ops->priv is never visible while SCX_DISABLED. The allocation failure path restores SCX_DIS

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: i2c: atr: fix dangling adapter pointer on add failure i2c_atr_add_adapter() stores atr->adCVE-2026-98218 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: i2c: atr: fix dangling adapter pointer on add failure i2c_atr_add_adapter() stores atr->adapter[chan_id] before i2c_add_adapter() so that the I2C bus notifier can match child clients during registration. On failure the channel is freed but the slot was left pointing at freed memory, which can lead to use-after-free in i2c_atr_del_adapter() / cleanup and also block reuse with -EEXIST. Clear the slot on the i2c_add_adapter() error path before freeing chan.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: IB/mlx4: Fix use-after-free on pkey sysfs registration failure register_pkey_tree() ignoreCVE-2026-98217 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: IB/mlx4: Fix use-after-free on pkey sysfs registration failure register_pkey_tree() ignores errors from register_one_pkey_tree() and continues registering the remaining slaves. The per-slave error path has already released the pkey parent kobjects, but their pointers remain stored in the device. A later device cleanup therefore passes the stale pointers to kobject_put(), causing a use-after-free. Clear the parent pointers after releasing a failed slave tree and skip unregistered trees during device cleanup. This preserves the existing best-effort registration behavior while preventing a second cleanup of the failed tree.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix the PIO_CRED credit-return mmap hfi1_file_mmap()'s PIO_CRED case must hand usCVE-2026-98216 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix the PIO_CRED credit-return mmap hfi1_file_mmap()'s PIO_CRED case must hand user space the single credit-return page that holds this context's entry. That page is the second or third page of the per-node credit-return allocation once the hardware send context index reaches 64 or 128, so the failure below is intermittent: when the entry lands on the first page the offset is zero and everything works. Two things are wrong. First, cr_page_offset is a byte offset but .va is a struct credit_return *, so adding it is pointer arithmetic and scales the offset by sizeof(struct credit_return) == 64. memvirt then lands 256 KiB or 512 KiB past a 10240-byte allocation. With an IOMMU translating, that address is inside the vmalloc range but in no vm_area, so dma_mmap_coherent() -> iommu_dma_mmap() finds no pages, vmalloc_to_pfn() returns page_to_pfn(NULL), and remap_pfn_range() installs a frame above MAXPHYADDR. The first user read then takes: psm2_ep_open_pr: Corrupted page table at address 7a14d007e000 PGD 800000013886a067 P4D 800000013886a067 PUD 13886b067 PMD 13886c067

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: selinux: preserve user SID across nested backing files SELinux saves the user file SID in CVE-2026-98215 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: selinux: preserve user SID across nested backing files SELinux saves the user file SID in a backing-file security blob so it remains available after mmap() replaces vma->vm_file with a backing file. For nested backing files (overlayfs over overlayfs, or FUSE passthrough backed by overlayfs), user_file may itself be a backing file. Its fsec->sid is the SID of the mounter that opened it, rather than the user that opened the top-level file. mprotect() then checks fd { use } against the mounter SID. This can incorrectly deny access without a domain transition, or check the wrong target SID after one. Copy the saved user SID when user_file is a backing file. Keep using the regular file SID for the first backing layer. With two nested overlayfs mounts and SELinux enforcing, mprotect(PROT_READ) returns EACCES with an fd { use } denial against the mounter SID. With this change, mprotect() succeeds. Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built SELinux policy. The original test was also repeated with Fedora Cloud Base 44 userspace and gave the same result.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: selinux: recheck intermediate backing files on mprotect() mprotect() can be used to bypassCVE-2026-98214 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: selinux: recheck intermediate backing files on mprotect() mprotect() can be used to bypass the SELinux checks that mmap() performs against the intermediate layers of a stacked filesystem. mmap() checks every backing layer as the request descends through the stack. mprotect() only has the lowest backing file in vma->vm_file, so it rechecks the top-level user and the lowest mounter, but skips the mounters of every layer in between. With two nested overlayfs mounts and a policy denying mounter_t -> middle_file_t:file { execute }, a direct mmap(PROT_EXEC) is denied: avc: denied { execute } for pid=71 comm="nested_exec" path="/payload" dev="overlay" ino=9 scontext=user_u:base_r:mounter_t tcontext=user_u:object_r:middle_file_t tclass=file permissive=0 while mmap(PROT_NONE) followed by mprotect(PROT_EXEC) succeeds. Preserve each intermediate path, mounter SID and file-description SID in the backing-file security blob, copying the saved entries when another backing layer is opened. Allocate the array only for nested backing files, and release it and the path references in the backing_file_free hoo

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: core: Cancel SDIO IRQ work before freeing host A host controller that uses sdio_signaCVE-2026-98213 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: core: Cancel SDIO IRQ work before freeing host A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work from its interrupt handler. That work is only cancelled on the suspend path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed just before the controller freed its IRQ can run after mmc_host_classdev_release() has freed the host and dereference it through container_of(). Cancel host->sdio_irq_work in mmc_free_host(), like the existing host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel delayed work before releasing host"). This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: hsq: Fix use-after-free in retry work mmc_hsq_pump_requests() queues retry_work when CVE-2026-98212 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: hsq: Fix use-after-free in retry work mmc_hsq_pump_requests() queues retry_work when request_atomic() returns -EBUSY; today sdhci-sprd is the only consumer that implements request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but is never cancelled during driver removal. Work still pending at unbind can therefore run after the devm allocation has been released and dereference hsq->mmc and hsq->mrq. Use devm_work_autocancel() to cancel and drain retry_work before the devm allocation is released. By the time devres cleanup begins, mmc_remove_host() has already stopped the host, so no new requests can arm the work. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: mmci: Fix use-after-free in busy-timeout work ux500_busy_complete() can queue ux500_bCVE-2026-98211 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: mmci: Fix use-after-free in busy-timeout work ux500_busy_complete() can queue ux500_busy_timeout_work for an R1b command, but mmci_remove() never cancels it. The work can subsequently dereference the devm-allocated mmci_host after it has been released. Mask the controller interrupts and disable the delayed work during removal. This drains any queued instance and stops an IRQ handler that is still in progress from queueing the work again once it has been disabled. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: mxcmmc: cancel data work and watchdog on remove mxcmci_remove() frees the host througCVE-2026-98210 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: mxcmmc: cancel data work and watchdog on remove mxcmci_remove() frees the host through the devm tail, but neither it nor mmc_remove_host() drains the driver's own asynchronous state. host->watchdog, a 10 s timer armed on the DMA path in mxcmci_setup_data(), is deleted only by the DMA- and IRQ-complete paths, which the remove path does not explicitly drain; it can therefore fire after the host is freed and dereference it in mxcmci_watchdog(). host->datawork, armed from the IRQ handler on the PIO path, is not cancelled by the remove path either. Free the devm-registered IRQ, then cancel datawork and delete the watchdog in mxcmci_remove(), before dma_release_channel(). Freeing the IRQ first keeps a trailing handler from re-arming datawork between the cancel and the host free. Both callbacks are non-self-rearming. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-aspeed: Remove children before releasing SDC resources Probe failure and remCVE-2026-98209 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-aspeed: Remove children before releasing SDC resources Probe failure and removal leave SDHCI child devices registered after the parent clock and managed resources are released. Unregister the OF children in reverse order before disabling the parent clock on both paths. Use of_platform_device_destroy() because manual child creation does not set the flag required by of_platform_depopulate(). This issue was identified during our ongoing static-analysis research while reviewing kernel code.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: sdio_uart: fix xmit_fifo leak when the port table is full sdio_uart_add_port() allocaCVE-2026-98208 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: sdio_uart: fix xmit_fifo leak when the port table is full sdio_uart_add_port() allocates the transmit fifo before claiming a slot in sdio_uart_table[]. When all UART_NR slots are taken, it returns -EBUSY with the fifo still allocated, but the probe error path only kfree()s the port, leaking the transmit fifo. Free the fifo in the failure path of sdio_uart_add_port() itself so the function retains nothing on error.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: spi: reset bytes_xfered before retrying CRC failures mmc_spi_data_do() updates data->CVE-2026-98207 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: spi: reset bytes_xfered before retrying CRC failures mmc_spi_data_do() updates data->bytes_xfered after each block has been transferred successfully. If a later block in the same data request fails with a CRC error, data->bytes_xfered may therefore contain the number of bytes completed before the failing block. mmc_spi_request() has a private recovery path for such CRC failures. It sends STOP_TRANSMISSION, clears data->error and jumps back to crc_recover to issue the same command and data request again. However, it does not clear data->bytes_xfered before the retry. If the retry succeeds, the request is completed with the bytes from the failed attempt still included in data->bytes_xfered. For a multi-block request this can make the completed request report more bytes than were transferred by the successful retry, and can even exceed the request size when most blocks completed before the CRC error. This is most likely to be observed on MMC-over-SPI systems where long multi-block transfers occasionally hit a data CRC error but the mmc_spi-internal retry succeeds. The data itself is retried, but the com

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Input: cyttsp5 - clamp the HID report size before memcpy The size field comes from the devCVE-2026-98206 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: cyttsp5 - clamp the HID report size before memcpy The size field comes from the device and is used as the memcpy() length into response_buf, which is CY_MAX_INPUT bytes.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Input: evdev - zero absinfo before partial copy in EVIOCSABS The EVIOCSABS handler copies CVE-2026-98205 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: evdev - zero absinfo before partial copy in EVIOCSABS The EVIOCSABS handler copies at most the user supplied ioctl size into an uninitialized on-stack struct input_absinfo: if (copy_from_user(&abs, p, min_t(size_t, size, sizeof(struct input_absinfo)))) The size comes from _IOC_SIZE() of the ioctl command and is therefore fully controlled by userspace. A short size leaves the trailing part of the structure holding whatever was on the kernel stack, and the whole structure is then stored into the device: dev->absinfo[t] = abs; EVIOCGABS hands that back to userspace, disclosing the stale stack bytes. Only the resolution field is currently cleared, which covers the legacy struct layout but not an arbitrarily short size. Zero the structure before the copy so any part not supplied by the caller reads back as zero. The existing resolution fixup is kept, since it also handles a size that partially overlaps that field.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block() When chunking writes inCVE-2026-98204 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block() When chunking writes into SMBus blocks in rmi_smb_write_block(), the loop calculates block_len using the original total length (len) instead of the remaining length (cur_len). If len is greater than 32 bytes (SMB_MAX_COUNT), block_len remains 32 for every iteration, even on the final partial chunk where fewer than 32 bytes remain. This causes smb_block_write() to read 32 bytes from the advanced data buffer pointer, reading past the end of the input buffer. Fix this by calculating block_len using cur_len and advancing the buffer and address pointers by block_len.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Input: soc_button_array - check btns_desc->package.count Check that btns_desc->package.couCVE-2026-98203 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: soc_button_array - check btns_desc->package.count Check that btns_desc->package.count is not 0 before accessing btns_desc->package.elements[0].

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound Transport drivers (suchCVE-2026-98202 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound Transport drivers (such as rmi_i2c and rmi_spi) invoke rmi_driver_suspend() and rmi_driver_resume() on their child rmi_dev device during system power management events. However, transport drivers are fully registered and operational even if the physical RMI driver failed to bind or probe the rmi_dev device. When rmi_driver_suspend() or rmi_driver_resume() is called on an unbound rmi_dev, dev_get_drvdata() returns NULL. Calling rmi_disable_irq() or rmi_enable_irq() without driver data attached causes a NULL pointer dereference and General Protection Fault when attempting to lock data->enabled_mutex. Fix this by checking if driver data is attached to rmi_dev in rmi_driver_suspend() and rmi_driver_resume(), exiting early if no driver data is present.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.