Vulnerability database

18,668 results · page 22 of 374

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: core: Cancel SDIO IRQ work before freeing host A host controller that uses sdio_signaCVE-2026-98213 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: core: Cancel SDIO IRQ work before freeing host A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work from its interrupt handler. That work is only cancelled on the suspend path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed just before the controller freed its IRQ can run after mmc_host_classdev_release() has freed the host and dereference it through container_of(). Cancel host->sdio_irq_work in mmc_free_host(), like the existing host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel delayed work before releasing host"). This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: hsq: Fix use-after-free in retry work mmc_hsq_pump_requests() queues retry_work when CVE-2026-98212 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: hsq: Fix use-after-free in retry work mmc_hsq_pump_requests() queues retry_work when request_atomic() returns -EBUSY; today sdhci-sprd is the only consumer that implements request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but is never cancelled during driver removal. Work still pending at unbind can therefore run after the devm allocation has been released and dereference hsq->mmc and hsq->mrq. Use devm_work_autocancel() to cancel and drain retry_work before the devm allocation is released. By the time devres cleanup begins, mmc_remove_host() has already stopped the host, so no new requests can arm the work. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: mmci: Fix use-after-free in busy-timeout work ux500_busy_complete() can queue ux500_bCVE-2026-98211 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: mmci: Fix use-after-free in busy-timeout work ux500_busy_complete() can queue ux500_busy_timeout_work for an R1b command, but mmci_remove() never cancels it. The work can subsequently dereference the devm-allocated mmci_host after it has been released. Mask the controller interrupts and disable the delayed work during removal. This drains any queued instance and stops an IRQ handler that is still in progress from queueing the work again once it has been disabled. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: mxcmmc: cancel data work and watchdog on remove mxcmci_remove() frees the host througCVE-2026-98210 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: mxcmmc: cancel data work and watchdog on remove mxcmci_remove() frees the host through the devm tail, but neither it nor mmc_remove_host() drains the driver's own asynchronous state. host->watchdog, a 10 s timer armed on the DMA path in mxcmci_setup_data(), is deleted only by the DMA- and IRQ-complete paths, which the remove path does not explicitly drain; it can therefore fire after the host is freed and dereference it in mxcmci_watchdog(). host->datawork, armed from the IRQ handler on the PIO path, is not cancelled by the remove path either. Free the devm-registered IRQ, then cancel datawork and delete the watchdog in mxcmci_remove(), before dma_release_channel(). Freeing the IRQ first keeps a trailing handler from re-arming datawork between the cancel and the host free. Both callbacks are non-self-rearming. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-aspeed: Remove children before releasing SDC resources Probe failure and remCVE-2026-98209 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-aspeed: Remove children before releasing SDC resources Probe failure and removal leave SDHCI child devices registered after the parent clock and managed resources are released. Unregister the OF children in reverse order before disabling the parent clock on both paths. Use of_platform_device_destroy() because manual child creation does not set the flag required by of_platform_depopulate(). This issue was identified during our ongoing static-analysis research while reviewing kernel code.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: sdio_uart: fix xmit_fifo leak when the port table is full sdio_uart_add_port() allocaCVE-2026-98208 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: sdio_uart: fix xmit_fifo leak when the port table is full sdio_uart_add_port() allocates the transmit fifo before claiming a slot in sdio_uart_table[]. When all UART_NR slots are taken, it returns -EBUSY with the fifo still allocated, but the probe error path only kfree()s the port, leaking the transmit fifo. Free the fifo in the failure path of sdio_uart_add_port() itself so the function retains nothing on error.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: spi: reset bytes_xfered before retrying CRC failures mmc_spi_data_do() updates data->CVE-2026-98207 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mmc: spi: reset bytes_xfered before retrying CRC failures mmc_spi_data_do() updates data->bytes_xfered after each block has been transferred successfully. If a later block in the same data request fails with a CRC error, data->bytes_xfered may therefore contain the number of bytes completed before the failing block. mmc_spi_request() has a private recovery path for such CRC failures. It sends STOP_TRANSMISSION, clears data->error and jumps back to crc_recover to issue the same command and data request again. However, it does not clear data->bytes_xfered before the retry. If the retry succeeds, the request is completed with the bytes from the failed attempt still included in data->bytes_xfered. For a multi-block request this can make the completed request report more bytes than were transferred by the successful retry, and can even exceed the request size when most blocks completed before the CRC error. This is most likely to be observed on MMC-over-SPI systems where long multi-block transfers occasionally hit a data CRC error but the mmc_spi-internal retry succeeds. The data itself is retried, but the com

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Input: cyttsp5 - clamp the HID report size before memcpy The size field comes from the devCVE-2026-98206 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: cyttsp5 - clamp the HID report size before memcpy The size field comes from the device and is used as the memcpy() length into response_buf, which is CY_MAX_INPUT bytes.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Input: evdev - zero absinfo before partial copy in EVIOCSABS The EVIOCSABS handler copies CVE-2026-98205 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: evdev - zero absinfo before partial copy in EVIOCSABS The EVIOCSABS handler copies at most the user supplied ioctl size into an uninitialized on-stack struct input_absinfo: if (copy_from_user(&abs, p, min_t(size_t, size, sizeof(struct input_absinfo)))) The size comes from _IOC_SIZE() of the ioctl command and is therefore fully controlled by userspace. A short size leaves the trailing part of the structure holding whatever was on the kernel stack, and the whole structure is then stored into the device: dev->absinfo[t] = abs; EVIOCGABS hands that back to userspace, disclosing the stale stack bytes. Only the resolution field is currently cleared, which covers the legacy struct layout but not an arbitrarily short size. Zero the structure before the copy so any part not supplied by the caller reads back as zero. The existing resolution fixup is kept, since it also handles a size that partially overlaps that field.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block() When chunking writes inCVE-2026-98204 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block() When chunking writes into SMBus blocks in rmi_smb_write_block(), the loop calculates block_len using the original total length (len) instead of the remaining length (cur_len). If len is greater than 32 bytes (SMB_MAX_COUNT), block_len remains 32 for every iteration, even on the final partial chunk where fewer than 32 bytes remain. This causes smb_block_write() to read 32 bytes from the advanced data buffer pointer, reading past the end of the input buffer. Fix this by calculating block_len using cur_len and advancing the buffer and address pointers by block_len.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Input: soc_button_array - check btns_desc->package.count Check that btns_desc->package.couCVE-2026-98203 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: soc_button_array - check btns_desc->package.count Check that btns_desc->package.count is not 0 before accessing btns_desc->package.elements[0].

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound Transport drivers (suchCVE-2026-98202 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound Transport drivers (such as rmi_i2c and rmi_spi) invoke rmi_driver_suspend() and rmi_driver_resume() on their child rmi_dev device during system power management events. However, transport drivers are fully registered and operational even if the physical RMI driver failed to bind or probe the rmi_dev device. When rmi_driver_suspend() or rmi_driver_resume() is called on an unbound rmi_dev, dev_get_drvdata() returns NULL. Calling rmi_disable_irq() or rmi_enable_irq() without driver data attached causes a NULL pointer dereference and General Protection Fault when attempting to lock data->enabled_mutex. Fix this by checking if driver data is attached to rmi_dev in rmi_driver_suspend() and rmi_driver_resume(), exiting early if no driver data is present.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Input: zero ff_effect before compat copy in input_ff_effect_from_user In the compat path iCVE-2026-98201 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Input: zero ff_effect before compat copy in input_ff_effect_from_user In the compat path input_ff_effect_from_user() aliases the caller's native struct ff_effect with the smaller struct ff_effect_compat and copies only the compat sized prefix: compat_effect = (struct ff_effect_compat *)effect; if (copy_from_user(compat_effect, buffer, sizeof(struct ff_effect_compat))) The tail of the native structure is never written. Callers pass an uninitialized on-stack object, for example evdev_do_ioctl() for EVIOCSFF, so those bytes keep their previous stack contents. input_ff_upload() then stores the full native structure in ff->effects[id], from where a uinput based force feedback daemon can read it back via UI_BEGIN_FF_UPLOAD, disclosing kernel stack memory to userspace. Zero the effect before the compat copy.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: hwmon: (hp-wmi-sensors) Fix use-after-free in fungible_show() nsensor->current_state is dyCVE-2026-98200 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: hwmon: (hp-wmi-sensors) Fix use-after-free in fungible_show() nsensor->current_state is dynamically replaced as the sensor's state changes. update_numeric_sensor_from_wobj() does this by freeing the old string and installing a new one: if (strcmp(trimmed, nsensor->current_state)) { new_string = hp_wmi_strdup(dev, trimmed); if (new_string) { devm_kfree(dev, nsensor->current_state); nsensor->current_state = new_string; } } This function is only ever called from hp_wmi_update_info() while state->lock is held, so the free-and-replace itself is properly serialized against concurrent updates. fungible_show(), however, reads the same pointer after the lock has already been dropped: err = hp_wmi_update_info(state, info); if (err) return err; switch (prop) { ... case HP_WMI_PROPERTY_CURRENT_STATE: seq_printf(seqf, "%s\n", nsensor->current_state); break; hp_wmi_update_info() takes state->lock internally and releases it before returning, so by the time fungible_show() dereferences nsensor->current_state in seq_printf(), no lock is held. Two processes reading a sensor's current_state debugfs en

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) increase number of phases and add new mask Increase the number of phasCVE-2026-98199 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/core) increase number of phases and add new mask Increase the number of phases to 16 as a new upcoming device supports such a number. While at it, add a new mask for controlling the source of the output voltage. Note (groeck): This patch was meant to prepare for support of MAX20826 and compatible devices, which support more than 10 phases per page. However, Sashiko reports that the mp2975 driver already supports up to 14 phases, and the mp2856 driver supports up to 12 phases. This already has the potential for out-of-bounds writes when probing the affected chips, making this patch a bug fix.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: hwmon: (pwm-fan) Stop RPM timer before freeing tach data sample_timer() rearms the RPM timCVE-2026-98198 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: hwmon: (pwm-fan) Stop RPM timer before freeing tach data sample_timer() rearms the RPM timer and accesses the devm-managed ctx->tachs and ctx->pulses_per_revolution arrays. The cleanup action which stops the timer is registered before those arrays are allocated. Since devres releases entries in reverse order, driver detach can free the arrays before pwm_fan_cleanup() shuts down the timer. A timer expiry in that window accesses the freed tach data. With a KASAN kernel, a test-only kprobe delayed entry to pwm_fan_cleanup() while normal sysfs unbind ran. Each of three runs reported three four-byte reads and two four-byte writes in sample_timer() after its backing devm allocations had been freed. The helper did not invoke the timer callback, cleanup actions or free functions. With the fix, three matching unbind runs completed without KASAN, BUG, WARNING, Oops or panic. Instrumentation confirmed that timer retirement completed before the first timer backing allocation was released. Split timer retirement from the power cleanup and register its devres action after the timer backing data and IRQ actions are installe

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) remove fan/pwm 4-5 sysfs group on remove When the fan/pwm 4-5 pins are noCVE-2026-98197 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) remove fan/pwm 4-5 sysfs group on remove When the fan/pwm 4-5 pins are not used as GPIO, w83791d_probe() creates the w83791d_group_fanpwm45 sysfs group on the I2C client device. The probe error path removes this group when a later initialization step fails, but the normal remove path only removes w83791d_group. As a result, the optional fan/pwm 4-5 sysfs files can remain after the driver is unbound. The callbacks associated with these files access the driver data, which is devm allocated and released after driver unbind. Leaving the sysfs files behind can therefore result in accesses to stale driver data. Remove w83791d_group_fanpwm45 during normal teardown as well. This issue was found by manual code inspection.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: fix UAF in brcms_free_timer() brcms_free_timer() calls brcms_del_timer() wCVE-2026-98196 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: brcmsmac: fix UAF in brcms_free_timer() brcms_free_timer() calls brcms_del_timer() which uses the non-synchronous cancel_delayed_work() to cancel the timer's underlying delayed work. If the work callback (_brcms_timer) is already running, cancel_delayed_work() returns false without waiting, and brcms_free_timer() proceeds to kfree(t) while the callback still accesses t through container_of(). Add an explicit cancel_delayed_work_sync() after brcms_del_timer() to guarantee that any in-flight callback has completed before the timer structure is freed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: fix broadcast stations deallocation On the error path of __il4965_up(), ilCVE-2026-98195 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: fix broadcast stations deallocation On the error path of __il4965_up(), il_dealloc_bcast_stations() clears only IL_STA_UCODE_ACTIVE, leaving IL_STA_BCAST set. This causes the same broadcast stations to be deallocated again by __il4965_down(). This can occur when RF_KILL is toggled during driver startup. To fix clear the entire 'used' field, since we will not do any other operations on the station.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: libertas_tf: fix UAF in lbtf_free_adapter() lbtf_free_adapter() calls lbtf_free_cmd_CVE-2026-98194 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: libertas_tf: fix UAF in lbtf_free_adapter() lbtf_free_adapter() calls lbtf_free_cmd_buffer() to free the command buffers before calling timer_delete_sync() to wait for the command timer callback. If the timer callback (command_timer_fn) is already running when lbtf_free_cmd_buffer() frees the command array, the callback dereferences priv->cur_cmd->cmdbuf which points to freed memory. Swap the order so that timer_delete_sync() runs first, ensuring any in-flight callback has completed before the command buffers are freed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject TKIP frames without a full MIC libipw_michael_mic_verify() assumes thCVE-2026-98193 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject TKIP frames without a full MIC libipw_michael_mic_verify() assumes that an skb contains an eight-byte Michael MIC. A short TKIP frame makes the unsigned payload length wrap, causing michael_mic() to read past the skb. Check that the MIC is present before verifying it, and use the existing MICHAEL_MIC_LEN constant for all MIC lengths in the verifier.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: Fix potential use-after-free in TX ack timer teardown wcn36xx_dxe_deinit() CVE-2026-98192 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: Fix potential use-after-free in TX ack timer teardown wcn36xx_dxe_deinit() tears down the TX ack timer with timer_delete(), which only dequeues the timer and does not wait for a callback that is already executing; the preceding free_irq() calls synchronize the interrupt handlers only. The callback, wcn36xx_dxe_tx_timer(), can therefore be running past the teardown and use the wcn freed along with the ieee80211_hw in wcn36xx_remove(): it takes wcn->dxe_lock, reads wcn->tx_ack_skb and passes wcn->hw to ieee80211_tx_status_irqsafe(). Fix this by using timer_shutdown_sync(), which waits for a running callback and also prevents the timer from being rearmed again. The timer is set up again by wcn36xx_dxe_init() on the next start, so the start/stop cycle is unaffected. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: release runtime PM ref on regdomain config failure wlcore_regdomain_config()CVE-2026-98191 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: release runtime PM ref on regdomain config failure wlcore_regdomain_config() gets a runtime PM reference before sending the regulatory-domain command. When wlcore_cmd_regdomain_config_locked() fails, the function queues recovery and returns without dropping that reference. Release the reference after handling the command result so both success and failure paths balance the preceding pm_runtime_resume_and_get(). The recovery worker takes a separate runtime PM reference and cannot release the reference held here.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix out-of-bounds read in P2P public action frames wilc_wfi_p2p_rx() and mCVE-2026-98190 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix out-of-bounds read in P2P public action frames wilc_wfi_p2p_rx() and mgmt_tx() start parsing a frame once ieee80211_is_public_action() returns true. That helper only verifies the frame is long enough for the action category field, that is offsetofend(struct ieee80211_mgmt, u.action.category), 25 bytes. Both functions then read the P2P public action header up to oui_subtype at offset 30 and pass "size - ie_offset" to cfg80211_find_vendor_ie(), where ie_offset is offsetof(struct ieee80211_mgmt, u) + sizeof(*d), i.e. 32. A public action frame of 25 to 31 bytes passes the check but is shorter than that 32 byte header, so oui_subtype can be read out of bounds, and because the length is unsigned, "size - ie_offset" underflows to a value close to 4 GiB. cfg80211_find_vendor_ie() takes an unsigned int length, so even the size_t subtraction in mgmt_tx() is truncated to the same value. It then walks far past the buffer searching for a vendor element until it reaches unmapped memory. In the receive path the frame arrives over the air and needs no association, so a nearby unauthenticated device can cras

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext() wilc_wlan_handle_isrCVE-2026-98189 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix RX buffer OOB-write in wilc_wlan_handle_isr_ext() wilc_wlan_handle_isr_ext() takes the RX transfer size from the device-reported interrupt status register (a 15-bit field shifted left by 2, up to 131068 bytes) and reads that many bytes from the device into rx_buffer, which is only WILC_RX_BUFF_SIZE (96K) large. The wrap check only handles the current offset; the size itself is never compared against the buffer, so a bogus SDIO device can make the driver OOB-write rx_buffer by up to ~32K with data it controls. The oversized transfer also leaves rx_buffer_offset past the end of the buffer, after which the unsigned wrap check stops working and the overflow can repeat. Drop any transfer whose size exceeds the RX buffer, acknowledging the data interrupt and re-arming the RX engine so the bogus frame is discarded and reception can continue. This also restores the rx_buffer_offset <= WILC_RX_BUFF_SIZE invariant the wrap check relies on. This is not expected to change driver behavior in most cases: without this check, an oversized transfer would most likely corrupt neighboring kernel memory instead

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate curve data length in the calibration curve converters p54_convert_rev0CVE-2026-98188 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate curve data length in the calibration curve converters p54_convert_rev0() and p54_convert_rev1() read calibration curve data from the device-supplied EEPROM entry using channel and points-per-channel counts taken verbatim from that same entry, so an entry that declares more data than it carries drives an out-of-bounds read past the EEPROM buffer (verified with a KASAN reproducer of the conversion loop). The sibling converters p54_convert_output_limits() and p54_convert_db() already validate their counts against the entry length; this path was missed. Reject the entry when the counts do not fit in the entry data.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: p54: require a full exp_if record in PDR_INTERFACE_LIST The PDR_INTERFACE_LIST loop CVE-2026-98187 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: p54: require a full exp_if record in PDR_INTERFACE_LIST The PDR_INTERFACE_LIST loop only checks that the record start is within the entry before reading an entire struct exp_if from it. A truncated trailing record makes the if_id/variant reads cross the entry boundary into the heap beyond the EEPROM buffer (verified with a KASAN reproducer of the loop). The variant also feeds the synth front-end selection, so this is not only a leak. Advance only while a full record still fits in the entry.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: bound the pairwise-cipher OUI walk to the IE length mwifiex_search_oui_in_iCVE-2026-98186 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: bound the pairwise-cipher OUI walk to the IE length mwifiex_search_oui_in_ie() reads a pairwise-cipher (PTK) count from a beacon/probe-response RSN or WPA information element and then walks that many 4-byte OUIs, comparing each with memcmp(). The count comes straight from the (attacker-supplied) IE and is never checked against the element's own length, and the callers admit the element on element_id alone (has_ieee_hdr() / has_vendor_hdr(), no length check). A crafted RSN/WPA IE with a large pairwise count therefore makes the walk read up to 255 * 4 bytes past the element -- an out-of-bounds read of the kmemdup()'d beacon buffer, reachable from any AP whose beacon/probe response is processed during scan-result parsing. Pass the number of IE bytes available at the OUI list and bound the walk to the element. Keep the length signed and reject a negative value before any unsigned arithmetic, so a small or zero IE length cannot underflow to a large size_t and defeat the bound. Found by 0sec automated security-research tooling (https://0sec.ai).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: validate scan response extents mwifiex_ret_802_11_scan() subtracts the fixeCVE-2026-98185 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: validate scan response extents mwifiex_ret_802_11_scan() subtracts the fixed response fields and the firmware-provided BSS length from resp->size without first proving that either extent fits. A short response or oversized BSS length can therefore underflow tlv_buf_size and make the TLV parser walk beyond the command response. Compute the fixed extent from the selected normal or background scan response. Validate that the fixed fields and BSS data fit before deriving the TLV extent and entering the parser.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: prevent authentication frame length truncation mwifiex_cfg80211_authenticatCVE-2026-98184 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: prevent authentication frame length truncation mwifiex_cfg80211_authenticate() derives the authentication frame length from req->ie_len and req->auth_data_len, both of type size_t, but stores it in a u16. NL80211_ATTR_AUTH_DATA only has a minimum length policy. Since nla_len is a u16, a single attribute can carry up to 65531 bytes of payload, so the sum can exceed U16_MAX before it is assigned to pkt_len. The truncated pkt_len determines the skb frame area, while the copy length remains req->auth_data_len - 4, resulting in a heap buffer overflow. For example, with auth_data_len equal to 65510 and no IEs, the sum is 65546. It is truncated to 10 and then reduced by four to 6. The driver appends only six bytes to the skb with skb_put(), but then copies 65506 user-provided bytes into the authentication body. Reaching this path requires CAP_NET_ADMIN in the user namespace owning the network namespace, an up station netdev, and a suitable BSS/SAE authentication request. Compute the length in size_t, reject values that cannot be represented by the firmware's u16 frame length field, and only then assig

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid out-of-bounds read for empty PREQ elements ieee80211_mesh_preq_size_CVE-2026-98183 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid out-of-bounds read for empty PREQ elements ieee80211_mesh_preq_size_ok() derives the location of the PREQ bottom fields before checking whether the element contains even the fixed header. ieee80211_mesh_hwmp_preq_get_bottom() reads the flags byte to account for the optional Address Extension field. Consequently, an empty PREQ element causes a one-byte read beyond its declared payload. Move the helper call after both size checks, so the bottom fields are only accessed when they are present.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: refuse to make a monitor active when it has no queue A monitor interface oCVE-2026-98182 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: refuse to make a monitor active when it has no queue A monitor interface only gets a TXQ if it's created active, and one can't be added later. Setting the flag on a down interface is still allowed, so the driver is handed a monitor with no queue. ath9k dereferences it: BUG: kernel NULL pointer dereference, address: 0000000000000066 RIP: 0010:ath_tx_node_init+0x49/0x170 [ath9k] ath9k_add_interface+0x10c/0x140 [ath9k] drv_add_interface+0x54/0x250 [mac80211] ieee80211_do_open+0x32f/0x800 [mac80211] Reached with CAP_NET_ADMIN by "iw dev X set monitor active" followed by "ip link set X up". RTNL is held, so netlink operations block behind it. Refuse the flag when there is no queue to give.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/gud: fix out-of-bounds write in gud_plane_atomic_check() The plane property loop uses CVE-2026-98181 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/gud: fix out-of-bounds write in gud_plane_atomic_check() The plane property loop uses req->properties[num_properties + i] as write index while simultaneously incrementing `num_properties` inside the loop. At iteration i, num_properties has also incremented by i, so the write is done at `initial_num_properties + 2*i`, skipping every other index and advancing by 2 per iteration. With just 2 connector and 32 plane properties the last write happens at index 64, one slot past the end of the 64-slot (indices 0–63) allocation. A USB device can trigger OOB by advertising the maximum number of properties. Fix by dropping the redundant `+ i`; num_properties is already the correct running index, as gud_connector_fill_properties() fills the preceding slots.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/msm: RCU-free the scheduler-containing ring and VM objects Both struct msm_ringbuffer CVE-2026-98180 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: drm/msm: RCU-free the scheduler-containing ring and VM objects Both struct msm_ringbuffer and struct msm_gem_vm embed a struct drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then free the containing object with plain kfree(). drm_sched_fence_get_timeline_name() returns fence->sched->name, and the scheduler fence keeps a .release callback so it is not ops-detached on signalling. A finished fence exported to userspace (the submit out-fence, or a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded scheduler after the ring/VM is freed, so a later get_timeline_name() -- reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab memory (KASAN slab-use-after-free read). Per the dma-fence lifetime contract the exporter must keep the data backing a signalled fence alive for an RCU grace period. Free the scheduler-containing objects with kfree_rcu() instead of kfree(). Patchwork: https://patchwork.freedesktop.org/patch/750234/

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix rmmio iounmap skipped on device removal amdgpu_pci_remove() calls drm_dev_CVE-2026-98179 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix rmmio iounmap skipped on device removal amdgpu_pci_remove() calls drm_dev_unplug() before fini_sw(), so drm_dev_enter() is already false there and the iounmap() guarded by it is skipped. This .remove path runs on both hot-unplug and plain rmmod, so the register BAR ioremap mapping leaks one instance per unload. Unmap rmmio unconditionally (guard only on non-NULL) and drop the now unused idx. (cherry picked from commit dd6f86a97260e5207d3329ad03aa89fdad61b1e6)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Skip KFD mapping clear before initialization amdgpu_amdkfd_clear_kfd_mapping()CVE-2026-98178 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Skip KFD mapping clear before initialization amdgpu_amdkfd_clear_kfd_mapping() assumes that a non-NULL kfd_dev has a fully populated node array. This is not true when KFD device initialization fails after probe. For example, kgd2kfd_device_init() sets num_nodes before checking PCIe atomics support. On Polaris systems without the required atomics, it returns before allocating nodes[0], but the kfd_dev remains attached to the amdgpu device. A later GPU reset then dereferences nodes[0]->id. Require the authoritative KFD initialization flag before walking the node array, matching the existing KFD reset and teardown paths. (cherry picked from commit 4ac1835823c47903fbb278bbf474773c46f59edc)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow in EOP ring size calculation.CVE-2026-98177 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow in EOP ring size calculation. The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as order_base_2(q->eop_ring_buffer_size / 4) - 1 But order_base_2 can in theory return 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to order_base_2(q->eop_ring_buffer_size / 8) using properties of logarithms. Also add to the above comment to make the mathematics more clear. (cherry picked from commit f0f43fcf8b2b3a924cad9444340921c96ed5f634)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow with ffs in EOP ring size calc The low 6 bits of cp_hqCVE-2026-98176 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid integer underflow with ffs in EOP ring size calc The low 6 bits of cp_hqd_eop_control store the base-2 logarithm of the EOP ring size. This was calculated as ffs(q->eop_ring_buffer_size / sizeof(unsigned int)) - 1 - 1 But ffs can in theory return 1 or 0, so this could underflow (although in practice the ring buffer size cannot be less than 4096). Change this to ffs(q->eop_ring_buffer_size / sizeof(unsigned int) / 4) using properties of logarithms. (cherry picked from commit 4f18c56630383c14bfc6b2d65f88f2f895d2121a)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: cancel reconnect work in clean_demultiplex_info() clean_demultiplex_info() caCVE-2026-98175 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: smb: client: cancel reconnect work in clean_demultiplex_info() clean_demultiplex_info() cancels server->echo delayed work but not server->reconnect, which can cause a use-after-free when the demultiplex thread exits while a reconnect work is still queued: cifs_demultiplex_thread() cifs_readv_from_socket() cifs_reconnect() __cifs_reconnect() cifs_queue_server_reconn() mod_delayed_work(cifsiod_wq, &server->reconnect, 0) clean_demultiplex_info() cancel_delayed_work_sync(&server->echo) // echo canceled // reconnect NOT canceled kfree_sensitive(server) // server freed ...later, on cifsiod_wq: smb2_reconnect_server() server->srv_count // UAF read of freed server Fix this by canceling server->reconnect delayed work in clean_demultiplex_info() before the server is freed, the same way cifs_put_tcp_session() already does.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix rlist race and missing initialization TCP_Server_Info.rlist is allocated CVE-2026-98174 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: smb: client: fix rlist race and missing initialization TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next and ->prev to NULL instead of pointing to itself, making list_empty() always return false and list_add() dereference a NULL ->prev pointer. Also, cifs_signal_cifsd_for_reconnect() can be called concurrently from multiple cifsd threads, allowing the same server's rlist node to be added twice into the local list, corrupting it.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free of iface in cifs_try_adding_channels() cifs_try_adding_chaCVE-2026-98173 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free of iface in cifs_try_adding_channels() cifs_try_adding_channels() iterates ses->iface_list with list_for_each_entry_safe_from(), which captures the next entry (niface) under iface_lock. The loop body then drops iface_lock for the whole duration of cifs_ses_add_channel(). A concurrent interface refresh (SMB3_request_interfaces() -> parse_server_interfaces()) marks all ifaces inactive and removes and frees any that are not re-advertised via list_del() + kref_put(), where release_iface() is a bare kfree(). Since niface typically has no channel holding a reference, the list reference is its last and it can be freed inside the unlocked window. On continue, the iterator advance step then dereferences niface->iface_head.next, and the loop body reads iface->rdma_capable/is_active, both on freed memory. Fix this by never keeping an unreferenced list pointer across the unlocked window. Each channel attempt now re-scans the list from the head under iface_lock, takes a kref on the selected candidate, and passes only that referenced candidate to cifs_ses_add_channel(). weight_fulfilled st

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbd_connection leak on cifs_get_tcp_session() error When an RDMA connectCVE-2026-98172 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: smb: client: fix smbd_connection leak on cifs_get_tcp_session() error When an RDMA connection is successfully established via smbd_get_connection() but cifs_get_tcp_session() later fails (e.g. kthread_create() returns an error), the error path frees tcp_ses without first destroying the smbd_connection. Fix this by calling smbd_destroy() in the out_err cleanup path before kfree(tcp_ses). smbd_destroy() safely handles the case where smbd_conn is NULL, so it can be called unconditionally.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs Fix several relatCVE-2026-98171 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: smb: client: fix next_buffer UAF and NextCommand bounds in compound PDUs Fix several related bounds checking and pointer lifecycle issues in receive_encrypted_standard()'s handling of compound encrypted frames: - Clear next_buffer after assigning it to server->bigbuf. A stale next_buffer pointer can lead to a use-after-free on subsequent error paths. - Update pdu_length to the decrypted plaintext size (buf_size). Using the pre-decryption length allows NextCommand to point into stale ciphertext residue. - Reject next_cmd values smaller than MID_HEADER_SIZE(server). - Fix an integer overflow in the upper bound check by verifying pdu_length - next_cmd < MID_HEADER_SIZE(server), ensuring the trailing slice is large enough for a header.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs() In move_smb2_ea_to_cifs(CVE-2026-98170 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs() In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is insufficient. It allows iteration to continue even if the remaining src_size is too small to contain a complete smb2_ea_info structure. Consequently, reads of ea_name_length and ea_value_length can occur out-of-bounds. Fix this by ensuring src_size >= sizeof(*src) before attempting to read any structure fields. Additionally, reject any next_entry_offset that is smaller than sizeof(*src) or that would advance the pointer beyond the available buffer. Note that for calls where the server returns a malformed EA list, the error returned to userspace changes from -ENODATA (getxattr) or -ERANGE (listxattr) to -EIO. This correctly signals a server protocol error rather than misleadingly indicating "attribute not present" or "output buffer too small".

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential OOB read in smb3_enum_snapshots() If snapshot_array_size is smaCVE-2026-98169 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential OOB read in smb3_enum_snapshots() If snapshot_array_size is smaller than GMT_TOKEN_SIZE, smb3_enum_snapshots() sets ret_data_len to sizeof(struct smb_snapshot_array) without verifying the actual length of the server's reply. Because SMB2_ioctl() places no lower bound on the server-supplied OutputCount and allocates retbuf to exactly that length, a short reply results in ret_data_len exceeding the size of retbuf. The subsequent copy_to_user() then reads past the end of retbuf, leaking adjacent slab memory to userspace. The subsequent clamp check is ineffective as it only reduces ret_data_len. Fix this by rejecting replies shorter than sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set to the 12-byte struct size rather than the 16-byte MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes is exactly what copy_to_user() attempts to read.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix reparse buffer bounds in cifs_query_reparse_point() In cifs_query_reparseCVE-2026-98168 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: smb: client: fix reparse buffer bounds in cifs_query_reparse_point() In cifs_query_reparse_point(), the start >= end check before casting to struct reparse_data_buffer * only ensures the start pointer is within the response. It fails to verify that there is enough space remaining for the fixed 8-byte header of the structure. If a server provides a DataOffset that leaves less than 8 bytes remaining, the check passes, but subsequent reads of ReparseTag and ReparseDataLength will occur out-of-bounds. Fix this by ensuring the remaining space is at least the size of the reparse_data_buffer structure before accessing its fields.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix server->total_read for compound encrypted PDUs In receive_encrypted_standCVE-2026-98167 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: smb: client: fix server->total_read for compound encrypted PDUs In receive_encrypted_standard(), server->total_read is left at the full decrypted frame size when walking sub-PDUs of a compound encrypted frame. As a result, cifs_handle_standard() passes this full size to smb2_check_message(), causing the PDU length guards to incorrectly validate the entire compound frame instead of the current sub-PDU. This allows truncated non-last sub-PDUs to bypass length validation, leading to out-of-bounds reads in smb2_get_data_area_len(). Fix this by setting server->total_read to the true length of the current sub-PDU: next_cmd for non-last sub-PDUs, and the remaining pdu_length for the last one.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/ttm: fix swapped-out resources never leaving their bulk_move range ttm_tt_swapout() reCVE-2026-98166 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: drm/ttm: fix swapped-out resources never leaving their bulk_move range ttm_tt_swapout() returns the number of pages swapped out on success and a negative error code on failure; for a populated ttm it never returns zero. Commit b2ed01e7ad3d ("drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure") moved the bulk_move bookkeeping in ttm_bo_swapout_cb() under "if (!ret)", so the ttm_resource_del_bulk_move_unevictable() / ttm_resource_move_to_lru_tail() pair is now skipped on every successful swapout. The equivalent change for the shrinker in commit 1d59f36e95f7 ("drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure") tests "lret > 0", which is what was intended here as well. Before b2ed01e7ad3d the resource was taken off the bulk_move before the swapout; since then a swapped-out resource stays inside its BO's bulk_move range (and on the manager LRU) although it is unevictable. When it is later freed or the BO leaves the bulk_move (ttm_resource_free(), ttm_bo_set_bulk_move() via amdgpu_vm_bo_del()), ttm_resource_del_bulk_move() skips it because of its !ttm_resource_unevictable() guard, so a

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 5, 2026Newell Brands DYMO ID 1.5.1.71 resolves its plugin Modules directory relative to the process working directory.CVE-2026-102262 · Other software · Newell Brands · reported by 9119a7d8-5eab-497f-8521-727c672e3725High 7

  Newell Brands DYMO ID 1.5.1.71 resolves its plugin Modules directory relative to the process working directory. An attacker could store a job file alongside malicious modules / DLL that sets the process working directory to the job file's folder when a victim clicks on the file, resulting in code execution at the victim's privilege level. Fixed in 1.6.0.

  Product

  DYMO ID

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordmediaserver.newellrubbermaid.comraw.githubusercontent.com

• Oct 5, 2026In Eclipse Che versions 7.29.0 and later, the GET `/api/scm/resolve` and `POST /api/factory/resolver` endpoints pass an attacker-controlled URL to `URLFetcher.fCVE-2026-86671 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.4

  In Eclipse Che versions 7.29.0 and later, the GET `/api/scm/resolve` and `POST /api/factory/resolver` endpoints pass an attacker-controlled URL to `URLFetcher.fetch()`, which calls `new URL(url).openConnection()` with no scheme or host allow-list and returns the response body to the caller. Any authenticated Che user can read arbitrary local files via the file:// scheme (including the pod's Kubernetes service-account token at `file:///var/run/secrets/kubernetes.io/serviceaccount/token`), reach internal HTTP services and cloud instance metadata endpoints (169.254.169.254), and have their stored SCM personal access token attached as an `Authorization` header to a host of their choosing. The same credential-forwarding behavior also fires when a victim opens a workspace from a malicious devfile whose `parent.uri` points to an attacker-controlled server, enabling exfiltration of the victim's SCM PAT without direct API access. No fix is available.

  Product

  Eclipse Che

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgitlab.eclipse.orggitlab.eclipse.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.