Updated 11 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,762exploited flaws on CISA’s list

34added in the last 30 days

343new WordPress flaws this week

390,080entries in the database

363 results · page 2 of 8

Oct 9, 2026The LE Audio Broadcast Sink in subsys/bluetooth/audio/bap_broadcast_sink.c copies subgroup metadata from a received Basic Audio Announcement (BASE) into the staCVE-2026-19570 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 8.8
The LE Audio Broadcast Sink in subsys/bluetooth/audio/bap_broadcast_sink.c copies subgroup metadata from a received Basic Audio Announcement (BASE) into the static Broadcast Audio Scan Service parameter structure mod_src_param without any bounds check. In base_subgroup_meta_cb() the destination element was selected as mod_src_param.subgroups[mod_src_param.num_subgroups] with no test against ARRAY_SIZE(mod_src_param.subgroups) (sized by CONFIG_BT_BAP_BASS_MAX_SUBGROUPS, default 1), and the metadata was copied with memcpy() using the raw on-air length returned by bt_bap_base_get_subgroup_codec_meta() into a metadata array sized by CONFIG_BT_AUDIO_CODEC_CFG_MAX_METADATA_SIZE (default 4). The BASE validator bt_bap_base_get_base_from_ad() only checks structural consistency and permits up to ~24 subgroups and metadata LTVs of ~240 octets. The defect is reached from the periodic advertising receive callback: pa_recv() → bt_data_parse() → pa_decode_base() → update_recv_state_base() → bt_bap_base_foreach_subgroup() → base_subgroup_meta_cb(). Every broadcast sink registers a scan-delegator receive state at creation (bt_bap_broadcast_sink_create() calls broadcast_sink_add_src()), and CONFIG_
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Oct 9, 2026dynamic_object_create() in kernel/userspace/userspace.c computed the backing allocation for a dynamically allocated kernel object as obj_size_get(otype) + size,CVE-2026-19569 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 8.8
dynamic_object_create() in kernel/userspace/userspace.c computed the backing allocation for a dynamically allocated kernel object as obj_size_get(otype) + size, and for thread stack elements as STACK_ELEMENT_DATA_SIZE(size) (a round-up plus fixed overhead), without checking either expression for unsigned wrap-around. A size close to SIZE_MAX makes the computed total wrap to a very small value, so the heap chunk handed out is a few bytes while the object descriptor is still tagged with the full requested type and registered in the kernel object table. The size argument reaches that arithmetic directly from user mode. k_object_alloc_size() is declared __syscall in include/zephyr/sys/kobject.h, its verifier z_vrfy_k_object_alloc_size() in kernel/userspace/userspace_handler.c is a bare pass-through, and z_object_alloc() only range-checks otype — nothing bounds size. The stack-element branch is additionally reachable through the k_thread_stack_alloc() syscall via kernel/dynamic.c. Because subsequent kernel-object validation checks only the object's type and initialization state, the undersized handle passes K_SYSCALL_OBJ_INIT()/K_SYSCALL_OBJ_NEVER_INIT(), and the matching init syscall
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Oct 7, 2026ieee802154_decipher_data_frame() in subsys/net/l2/ieee802154/ieee802154_frame.c computed payload_len = net_pkt_get_len(pkt) - ll_hdr_len - authtag_len without fCVE-2026-19186 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 8.1
ieee802154_decipher_data_frame() in subsys/net/l2/ieee802154/ieee802154_frame.c computed payload_len = net_pkt_get_len(pkt) - ll_hdr_len - authtag_len without first checking that the received frame is at least ll_hdr_len + authtag_len bytes long. All three variables are uint8_t, so a frame whose payload is shorter than the configured authentication tag makes the subtraction wrap around to a large value (up to 255). The wrapped length is passed unchanged to ieee802154_decrypt_auth() and on to the CCM operation as cipher_pkt.in_len/out_buf_max, with apkt->tag pointing at frame + ll_hdr_len + payload_len. Because the receive buffer is allocated to the exact length of the frame received from the radio driver, the crypto layer then reads several hundred bytes past the end of the packet buffer and writes the same number of decrypted bytes back over it in place. The frame's authentication tag is only verified after this processing has taken place, so no key material, association or prior authentication is needed — a single crafted short frame from any device in radio range is sufficient. Frame validation in ieee802154_validate_frame() does not prevent it: a data frame is accepted with a
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Oct 7, 2026The Bluetooth Mesh On-Demand Private Proxy solicitation handler in subsys/bluetooth/mesh/solicitation.c copies a received Solicitation PDU into a fixed 17-byte CVE-2026-15894 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 8.8
The Bluetooth Mesh On-Demand Private Proxy solicitation handler in subsys/bluetooth/mesh/solicitation.c copies a received Solicitation PDU into a fixed 17-byte stack buffer without bounding the source length. In sol_pdu_decrypt(), out is allocated as NET_BUF_SIMPLE(17) and then filled with net_buf_simple_add_mem(out, in->data, in->len); net_buf_simple_add() guards its tailroom only with __ASSERT_NO_MSG, which is compiled out in production builds, so when in->len > 17 the underlying memcpy writes attacker-controlled bytes past the 17-byte stack buffer. The copy occurs before any decryption or authentication, so no key material is required to trigger it. The oversized length arises because the mesh scan callback in subsys/bluetooth/mesh/adv.c calls net_buf_simple_restore() before dispatching to bt_mesh_sol_recv(), leaving buf->len covering the entire remaining advertising payload rather than just the Solicitation Service Data. After the parser locates the Service Data AD and consumes the Identification Type byte, the remaining buf->len is the 17-octet Network PDU plus any trailing advertising bytes, and prior to this fix there was no maximum-length check (only a minimum). An attacke
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Oct 5, 2026The system-call verifier for i3c_do_ccc() in drivers/i3c/i3c_handlers.c validated the outer struct i3c_ccc_payload, the broadcast ccc.data buffer and the targetCVE-2026-19185 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.8
The system-call verifier for i3c_do_ccc() in drivers/i3c/i3c_handlers.c validated the outer struct i3c_ccc_payload, the broadcast ccc.data buffer and the targets.payloads[] array, but did not validate the per-target data buffers those array elements point at. Each struct i3c_ccc_target_payload carries its own data pointer and data_len, and neither was passed through K_SYSCALL_MEMORY() before the payload was handed to z_impl_i3c_do_ccc() and on to the controller driver. The verifier also operated on the caller's live structure rather than a snapshot, so validated fields could be changed by a second user thread between the check and the driver's use — unlike the sibling z_vrfy_i3c_transfer(), which has always copied its message array first. The defect is only present in CONFIG_USERSPACE builds, where drivers/i3c/i3c_handlers.c is compiled. An unprivileged user-mode thread that has been granted access to the I3C controller device object — the ordinary way an application lets a user thread talk to I3C peripherals — can issue a direct CCC whose target payload data pointer names an arbitrary kernel address. Controller drivers dereference that pointer directly (for example drivers/i3c/i3
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Oct 5, 2026The NXP GAU ADC driver (drivers/adc/adc_mcux_gau_adc.c) validated the caller-supplied sequence->buffer_size, which is expressed in bytes, against the number of CVE-2026-19184 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 8.4
The NXP GAU ADC driver (drivers/adc/adc_mcux_gau_adc.c) validated the caller-supplied sequence->buffer_size, which is expressed in bytes, against the number of active channels, which is a sample count. It then stored that byte count directly in data->results_length and used it in mcux_gau_adc_read_samples() as the number of uint16_t slots available. Because each conversion result occupies sizeof(uint16_t) bytes, a buffer that was accepted as "large enough" could be written with up to twice its size in bytes, so every sample past the buffer's midpoint was written out of bounds. adc_read() and adc_read_async() are Zephyr system calls. The syscall verifier in drivers/adc/adc_handlers.c only confirms that the caller owns buffer_size writable bytes (K_SYSCALL_MEMORY_WRITE); deciding whether that size is sufficient for the requested channels and extra_samplings is delegated entirely to the driver. On a build with CONFIG_USERSPACE=y, a user-mode thread that has been granted the ADC device object could therefore submit a deliberately half-sized buffer and cause the driver's work-queue handler — which runs in supervisor mode, outside the caller's MPU restrictions — to write ADC conversion
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Oct 1, 2026The SMBus driver API exposed smbus_smbalert_remove_cb() and smbus_host_notify_remove_cb() as Zephyr syscalls.CVE-2026-17053 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 4.4
The SMBus driver API exposed smbus_smbalert_remove_cb() and smbus_host_notify_remove_cb() as Zephyr syscalls. Their verifiers in drivers/smbus/smbus_handlers.c validated only the dev argument with K_SYSCALL_OBJ(dev, K_OBJ_DRIVER_SMBUS) and forwarded the caller-supplied struct smbus_callback *cb pointer into kernel-mode driver code without any K_SYSCALL_MEMORY_READ/K_SYSCALL_MEMORY_WRITE validation. A companion change in 2023 had already removed the matching smbus_smbalert_set_cb() / smbus_host_notify_set_cb() syscalls for this reason, but the two removal syscalls were left exposed. On a build with CONFIG_USERSPACE=y, CONFIG_SMBUS=y and a driver implementing the callback operations (drivers/smbus/intel_pch_smbus.c with CONFIG_SMBUS_INTEL_PCH_SMBALERT/CONFIG_SMBUS_INTEL_PCH_HOST_NOTIFY, or drivers/smbus/smbus_stm32.c with CONFIG_SMBUS_STM32_SMBALERT), any user-mode thread that has been granted the SMBus device object can invoke these syscalls with an arbitrary pointer. The value reaches smbus_callback_remove() in drivers/smbus/smbus_utils.h, which uses it as a node identity against the kernel's sys_slist_t of registered callbacks. The consequence is that an unprivileged thread can
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 28, 2026The MCUmgr SMP-over-console transport decodes a base64 frame, reads a 16-bit packet length from it, verifies a CRC and then unconditionally strips the trailing CVE-2026-18747 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.8
The MCUmgr SMP-over-console transport decodes a base64 frame, reads a 16-bit packet length from it, verifies a CRC and then unconditionally strips the trailing CRC with rx_ctxt->nb->len -= 2U; in mcumgr_serial_process_frag() (subsys/mgmt/mcumgr/transport/src/serial_util.c). mcumgr_serial_extract_len() accepted any declared length, including 0 and 1, and a packet declaring length 0 passes the checksum test for free because crc16_itu_t() over zero bytes returns the zero seed. Since net_buf::len is a uint16_t, the subtraction underflows and the buffer is handed to SMP claiming roughly 65 KB of payload while its data area is only CONFIG_MCUMGR_TRANSPORT_NETBUF_SIZE bytes (default 384). The trigger is a single unauthenticated 7-byte line on the management console — the 0x06 0x09 packet marker followed by the base64 group AAA= and a newline — delivered to any transport built on this helper: CONFIG_MCUMGR_TRANSPORT_UART (smp_uart.c) or CONFIG_MCUMGR_TRANSPORT_SHELL (smp_shell.c), both of which select MCUMGR_TRANSPORT_SERIAL_HAS_SMP_OVER_CONSOLE. No prior session state, fragmentation or credentials are required to trigger the underflow, and the malformed frame is mishandled before any com
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 28, 2026parse_write_op() in subsys/net/lib/lwm2m/lwm2m_message_handling.c handles inbound CoAP WRITE/CREATE requests that carry a Block1 option.CVE-2026-18746 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.9
parse_write_op() in subsys/net/lib/lwm2m/lwm2m_message_handling.c handles inbound CoAP WRITE/CREATE requests that carry a Block1 option. For the first block of a transfer it called init_block_ctx() and then immediately stored the peer-selected block size with block_ctx->ctx.block_size = block_size before inspecting the return code. init_block_ctx() sets the caller's pointer to NULL and returns -ENOMEM when no entry of the static block1_contexts[] pool is free or timed out, so that store dereferences a NULL pointer. The pool holds CONFIG_LWM2M_NUM_BLOCK1_CONTEXT entries (default 3) and an entry is only reclaimed once its transfer completes, fails, or ages past 30 seconds. A peer that reaches the client's LwM2M socket can therefore start three block-wise writes on three distinct object paths with the CoAP More bit set and leave them incomplete, then send the first block of a fourth write on a new path to reach the unguarded dereference. Reachability is gated only by the connected UDP socket's source-address filter unless CONFIG_LWM2M_DTLS_SUPPORT is enabled — which has no default — so in a NoSec deployment an on-path or address-spoofing attacker needs no credentials; the same sequen
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 28, 2026The native BSD-socket layer recorded a pending asynchronous socket error by type-punning it into struct net_context's void user_data field (ctx->user_data = INTCVE-2026-18417 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.5
The native BSD-socket layer recorded a pending asynchronous socket error by type-punning it into struct net_context's void user_data field (ctx->user_data = INT_TO_POINTER(-status) in zsock_accepted_cb(), zsock_received_cb(), zsock_connected_cb() and zsock_close_ctx() in subsys/net/lib/sockets/sockets_inet.c), reading it back with POINTER_TO_INT(). That same field is owned by the network stack for listening TCP contexts: net_tcp_accept() stores the parent context pointer there and the TCP core passes it back to the registered accept callback. A failed accept therefore left a small integer (an errno value) where the stack expected a struct net_context . When the network interface carrying a listening TCP socket goes down, close_tcp_conn() in subsys/net/ip/tcp.c invokes the accept callback with -ENETDOWN and the context's user_data. In v4.3.0 the callback was not disarmed afterwards, so a second interface-down event forwarded the previously stored errno to zsock_accepted_cb(), which dereferenced it as the parent context and performed several stores through it (sock_set_error()'s read-modify-write of socket_data, k_fifo_cancel_wait(&parent->recv_q)) — the crash described in the fix's
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 28, 2026The CoAP link-format helper match_path_uri() in subsys/net/lib/coap/coap_link_format.c compares a registered resource path against the URI carried in a Uri-QuerCVE-2026-18416 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgLow 3.7
The CoAP link-format helper match_path_uri() in subsys/net/lib/coap/coap_link_format.c compares a registered resource path against the URI carried in a Uri-Query href= option. That URI is not NUL terminated, but the inner character loop advanced its index k once per path character without ever testing it against the option length len. When a registered path segment is longer than the supplied URI and the URI is a prefix of it, the loop reads uri[len] and beyond, past the end of the option value. The path is reached from coap_well_known_core_get_len() and coap_well_known_core_get() via match_queries_resource(), i.e. by any unauthenticated GET /.well-known/core?href=/<prefix> request to a device that serves /.well-known/core (for the CoAP server subsystem, CONFIG_COAP_SERVER_WELL_KNOWN_CORE, default y) and has at least one resource that declares struct coap_core_metadata attributes. The over-read does not reach the receive buffer. The well-known-core builders parse the query into a stack-local struct coap_option, whose value is a fixed array (value[12], or CONFIG_COAP_EXTENDED_OPTIONS_LEN_VALUE bytes) that the option bytes are copied into, so uri points into that copy. Reading past
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 28, 2026ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEECVE-2026-18415 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.3
ieee802154_send() in subsys/net/l2/ieee802154/ieee802154.c copies the outgoing packet into a single fixed 125-byte transmit buffer (tx_frame_buf_pool, sized IEEE802154_MTU). In builds with CONFIG_NET_L2_IEEE802154_FRAGMENT enabled (the default whenever CONFIG_NET_6LO is set), the branch taken when 6LoWPAN fragmentation is not required performed an unchecked net_buf_add_mem(frame_buf, pkt_buf->data, pkt_buf->len). The only guard was __ASSERT_NO_MSG() inside net_buf_simple_add(), which is compiled out without CONFIG_ASSERT, so an oversized packet silently overran the frame buffer. The defect is not reachable from the radio: for NET_AF_INET6 packets ieee802154_6lo_encode_pkt() compares the whole packet length against IEEE802154_MTU and takes the fragmentation path when it does not fit, so every buffer copied on the unfragmented branch is within bounds. It is reachable through NET_AF_PACKET sockets bound to an 802.15.4 interface: for NET_SOCK_RAW the 6LoWPAN block is skipped entirely and for NET_SOCK_DGRAM it returns early on the address-family test, leaving no length validation anywhere on the transmit path (net_context_sendto() and net_if_tx() apply none, and pkt_buffer_length() doe
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 28, 2026The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zeCVE-2026-18414 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.8
The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The ADI MAX32 driver did not honour that contract. start_read() in drivers/adc/adc_max32.c compared buffer_size, a byte count, against a sample count ((1 + extra_samplings) channels), ignoring sizeof(uint16_t), so it accepted a buffer half the required size. The samples are then stored through the uint16_t data->buffer by Wrap_MXC_ADC_GetData(), which writes two bytes per sample and advances the pointer by one uint16_t: in adc_max32_start_channel() for synchronous reads, and in adc_max32_isr() for asynchronous ones. A sequence selecting two channels with a two-byte buffer, for example, passes the check and has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only tha
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 28, 2026The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zeCVE-2026-18413 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.8
The ADC API requires each driver to reject a sampling sequence whose destination buffer is too small: the buffer_size field of struct adc_sequence in include/zephyr/drivers/adc.h documents that "the driver must ensure that samples are not written beyond the limit and it must return an error if the buffer turns out to be not large enough". The NXP MCUX LPADC driver did not honour that contract. mcux_lpadc_start_read() in drivers/adc/adc_mcux_lpadc.c performed no buffer-size check at all before assigning data->buffer = sequence->buffer. Each completed conversion then stores one 16-bit sample per enabled channel per sampling round through an unbounded *data->buffer++: in mcux_lpadc_isr() for interrupt-driven builds, and in mcux_lpadc_dma_callback() for DMA-driven builds on releases that have the DMA path. A sequence selecting two channels with a two-byte buffer, for example, has its second sample written past the end of the buffer. On a build with CONFIG_USERSPACE, adc_read() and adc_read_async() are system calls. The handler in drivers/adc/adc_handlers.c copies the sequence in from user memory, verifies only that [buffer, buffer + buffer_size) is writable by the calling thread, and
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 28, 2026The userspace verifier z_vrfy_rtio_sqe_copy_in_get_handles() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) validated the RTIO objecCVE-2026-16513 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.8
The userspace verifier z_vrfy_rtio_sqe_copy_in_get_handles() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) validated the RTIO object handle and the sqes input array, but not the handle out-parameter. On the first loop iteration it executed *handle = sqe, storing the kernel address of the newly acquired submission-queue entry through a pointer taken verbatim from user mode, with no K_SYSCALL_MEMORY_WRITE check in front of it. Any user-mode thread that has been granted a struct rtio kernel object can invoke the syscall with an arbitrary address in handle. That is the ordinary way an unprivileged thread uses the RTIO API, for example via sensor_read_async_mempool() or the async ADC helpers, which call rtio_sqe_copy_in_get_handles() internally. The store happens in supervisor mode before any submission-entry validation, so it fires regardless of whether the SQE contents are subsequently rejected. Only builds with CONFIG_USERSPACE and CONFIG_RTIO are affected; without CONFIG_USERSPACE the verifier is not compiled and the caller is already privileged. The write address is fully attacker-chosen and the written value is a pointer into the caller's own RTIO ri
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 21, 2026The Espressif ESP-hosted Wi-Fi driver (drivers/wifi/esp_hosted/) parses frames received over SPI from the ESP co-processor in esp_hosted_event_task().CVE-2026-17054 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.3
The Espressif ESP-hosted Wi-Fi driver (drivers/wifi/esp_hosted/) parses frames received over SPI from the ESP co-processor in esp_hosted_event_task(). For control frames it took the 16-bit TLV field data_length straight off the wire and passed it to pb_istream_from_buffer(frame.data_value, frame.data_length) without checking it against the frame length or the receive buffer. frame.data_value sits 26 bytes into a 3188-byte stack object, so a data_length of up to 0xFFFF makes pb_decode() read up to roughly 62 KB past the end of that object. Only the first fragment of a fragmented control response carries a TLV header; the pre-fix driver performed half-duplex SPI transactions and silently discarded any frame the co-processor queued while the host was transmitting (esp_hosted_hal_spi_transfer() aliased the RX buffer onto the TX buffer). When the discarded frame is the first fragment of a fragmented response, the driver treats the next fragment as a new frame — its per-fragment header and checksum are genuine, so both validation steps pass — and reads the TLV header out of raw protobuf continuation bytes. Those bytes come from control responses whose size and content an adjacent, unaut
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 21, 2026The default AEAD nonce provider for the PSA Internal Trusted Storage transform module, secure_storage_its_transform_aead_get_nonce() in subsys/secure_storage/srCVE-2026-15890 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.3
The default AEAD nonce provider for the PSA Internal Trusted Storage transform module, secure_storage_its_transform_aead_get_nonce() in subsys/secure_storage/src/its/transform/aead_get.c, stores its nonce counter in unsynchronized function-local static variables (s_nonce and s_nonce_initialized). Every ITS write obtains its AES-GCM or ChaCha20-Poly1305 nonce here via secure_storage_its_transform_to_store(). Because the function held no lock, two threads calling it concurrently race on the shared statics: the initialization path (psa_generate_random() followed by memcpy()) and the non-atomic increment-then-copy path can each hand the same nonce value to two distinct encryption operations, and can lose increments so the counter repeats values it was designed never to repeat. The ITS layer (secure_storage_its_set() in subsys/secure_storage/src/its/implementation.c) performs no serialization of its own, so concurrent same-UID writes reach the racy provider directly. Reusing a nonce with the same key under AES-GCM or ChaCha20-Poly1305 is a catastrophic AEAD failure: it leaks the XOR of the two plaintexts (ITS routinely stores secrets, including PSA persistent keys) and, for GCM, expos
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 21, 2026The Time-aware GPIO syscall verification handler z_vrfy_tgpio_pin_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_handlers.c validated only the port devicCVE-2026-17052 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.8
The Time-aware GPIO syscall verification handler z_vrfy_tgpio_pin_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_handlers.c validated only the port device object and passed the caller-supplied timestamp and event_count output pointers to the driver without a K_SYSCALL_MEMORY_WRITE() check. The other handlers in the same file (z_vrfy_tgpio_port_get_time(), z_vrfy_tgpio_port_get_cycles_per_second()) already performed that check, so the omission left one syscall unguarded. tgpio_pin_read_ts_ec() is declared __syscall, so with CONFIG_USERSPACE=y an unprivileged user-mode thread that has been granted access to the TGPIO device object can invoke it with arbitrary pointer values. tgpio_intel_read_ts_ec() in drivers/timeaware_gpio/timeaware_gpio_intel.c bounds-checks only the pin index and then unconditionally performs timestamp = ... and event_count = ..., executing two 8-byte stores in supervisor mode at addresses chosen by the user-mode caller. The result is a write-what-where primitive that crosses the userspace/kernel boundary: the target address is fully attacker-chosen and the stored values are the hardware time-capture and event-counter register contents. Corrupting kernel
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 21, 2026The Intel SEDI IPM (inter-processor mailbox) driver in drivers/ipm/ipm_sedi.c handles an inbound message interrupt in ipm_event_dispose().CVE-2026-17051 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6
The Intel SEDI IPM (inter-processor mailbox) driver in drivers/ipm/ipm_sedi.c handles an inbound message interrupt in ipm_event_dispose(). It read the peer-written doorbell register, extracted the payload length with IPC_HEADER_GET_LENGTH(), and passed that length straight to sedi_ipc_read_msg() to copy the message into struct ipm_sedi_context.incoming_data_buf, without checking it against the buffer size. The doorbell length field is 10 bits wide (IPC_HEADER_LENGTH_MASK is 0x03FF), so it can encode up to 1023 bytes, while incoming_data_buf is IPC_DATA_LEN_MAX (128) bytes. The bounds check in the underlying HAL sedi_ipc_read_msg() is a DBG_CHECK that compiles away unless CONFIG_DEBUG is set, so no check remained in a production image. The doorbell register is written by the peer processor on the other side of the IPC link — for the intel_ish_5_* targets, the host CPU's ISH driver, reached through the device's memory-mapped register window. Host-side software with driver-level or raw BAR access can therefore set a length of up to 1023 and cause the interrupt handler to copy far past the destination buffer. The affected path requires an application to have registered an IPM receive
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 21, 2026The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_coCVE-2026-17050 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.7
The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c). On three failure paths — a failed full-length GET_DESCRIPTOR(CONFIGURATION) read, a mismatch between the short and full descriptor reads, and a rejected descriptor in parse_configuration_descriptor() — the buffer was released with k_heap_free() but the pointer was left dangling. The cleanup in usbh_device_free() is guarded only by if (udev->cfg_desc != NULL), so it frees the same block a second time. The path is driven entirely by the attached peripheral: usbh_device_connect() calls usbh_device_init(), which ends in usbh_device_set_configuration(), and on failure usbh_device_connect() calls usbh_device_free(). On v4.4.x this happens during the same enumeration, with no unplug required; on v4.1.0–v4.3.x the second free instead arrives via dev_removed_handler()/dev_connected_handler() in subsys/usb/host/usbh_core.c, so it requires a removal or duplicate-connect event after the failed enumeration — a sequence the attached device fully controls. A malicious or malformed USB device
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 18, 2026net_icmpv6_send_error() in subsys/net/ip/icmpv6.c implemented only one of the three RFC 4443 section 2.4 suppression rules (do not answer an ICMPv6 error with aCVE-2026-16515 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 4.7
net_icmpv6_send_error() in subsys/net/ip/icmpv6.c implemented only one of the three RFC 4443 section 2.4 suppression rules (do not answer an ICMPv6 error with an ICMPv6 error). It did not check whether the triggering packet's source address identifies a single node (rule e.6) or whether the packet was sent to a multicast destination (rule e.3, whose only exceptions are Packet Too Big and Parameter Problem Code 2). Of the five call sites, only the port-unreachable path in subsys/net/ip/connection.c carried an equivalent guard of its own; the extension-header, unknown-next-header and fragmentation paths in subsys/net/ip/ipv6.c and subsys/net/ip/ipv6_fragment.c had none. An unauthenticated attacker with access to the same link can exploit this in two ways. Sending a single IPv6 packet to the link-local all-nodes group ff02::1 carrying an unrecognized next-header value, with the source address spoofed to a chosen victim, causes every Zephyr node on the link to emit an ICMPv6 Parameter Problem message to that victim — a reflector with an amplification factor equal to the number of nodes. Alternatively, sending a unicast packet whose source address is a multicast address causes the node
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 18, 2026gptp_mi_qualify_announce() in subsys/net/l2/ethernet/gptp/gptp_mi.c walks the Path Trace TLV of a received IEEE 802.1AS Announce message, comparing each clock iCVE-2026-16514 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 4.3
gptp_mi_qualify_announce() in subsys/net/l2/ethernet/gptp/gptp_mi.c walks the Path Trace TLV of a received IEEE 802.1AS Announce message, comparing each clock identity against the local one. The loop bound was taken solely from the attacker-controlled wire field announce->steps_removed (accepted up to 254), never from announce->tlv.len, which is the field that states how many identities the TLV actually carries. Because path_sequence is the flexible member of the wire TLV (struct gptp_path_trace_tlv) and GPTP_ANNOUNCE() yields a raw pointer into the received packet buffer, the memcmp() inside the loop can address memory well past the end of the received frame. The stack's only length validation, GPTP_ANNOUNCE_CHECK_LEN(), requires the received gPTP payload to be exactly 68 + tlv.len bytes — so it does not constrain the loop, it guarantees the data is absent. An unauthenticated attacker on the same Ethernet segment can send a single Announce frame declaring tlv.len = 0 with steps_removed = 254; the frame passes the length check and reception path (net_gptp_recv() → gptp_handle_msg() → gptp_mi_qualify_announce()), which performs no authentication, and the loop then reads 255 entries
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 18, 2026gptp_handle_msg() in subsys/net/l2/ethernet/gptp/gptp.c dereferenced the gPTP header returned by GPTP_HDR() and switched on hdr->message_type without first checCVE-2026-16512 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgLow 3.1
gptp_handle_msg() in subsys/net/l2/ethernet/gptp/gptp.c dereferenced the gPTP header returned by GPTP_HDR() and switched on hdr->message_type without first checking that the received frame carries at least sizeof(struct gptp_hdr) (34) bytes of payload. The header accessor gptp_get_hdr() deliberately never fails for a short buffer — it returns pkt->frags->data and leaves validation to its callers — so a truncated frame produced a header pointer covering memory beyond the received data. The per-message-type checks that follow do not compensate: GPTP_VALID_LEN() reduces to len > 60 once the Ethernet header has been pulled, which is false for every fixed-size gPTP message, so GPTP_CHECK_LEN() never rejects a truncated SYNC, FOLLOWUP, PDELAY_RESP or SIGNALING message. The defect is reached by an unauthenticated peer on the same link sending an Ethernet frame with ethertype 0x88F7 to the PTP multicast address on an interface configured as a gPTP port, with CONFIG_NET_GPTP enabled. Because conformant Ethernet pads frames to 60 bytes, a payload shorter than 34 bytes generally requires a link that can deliver sub-minimum frames — for example the native_sim TAP driver (drivers/ethernet/eth_
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: avoid OOB read of build info string The virtbt_setup_zephyr() sends CVE-2026-90257 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: avoid OOB read of build info string The virtbt_setup_zephyr() sends the Zephyr vendor command 0xfc08 (Read Build Information) and hands the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length. A backend that answers with status only leaves that pointer past the end of the received data, so the walk reads adjacent slab memory until it meets a NUL. Those bytes reach the kernel log and the firmware-info debugfs file. To fix this, print the string with a bounded "%.*s" limited to skb->len - 1. A short or unterminated response then prints as much as arrived instead of failing setup. This mirrors commit dd068ef04412 ("Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()"), which fixed the identical pattern.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Sep 14, 2026The ITE it51xxx I2C driver, when operating as an I2C target (slave) in buffer mode (CONFIG_I2C_TARGET + CONFIG_I2C_TARGET_BUFFER_MODE), copies host-supplied wriCVE-2026-14986 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.8
The ITE it51xxx I2C driver, when operating as an I2C target (slave) in buffer mode (CONFIG_I2C_TARGET + CONFIG_I2C_TARGET_BUFFER_MODE), copies host-supplied write data into the fixed-size data->target_in_buffer inside its target FIFO interrupt handler target_i2c_isr_fifo() in drivers/i2c/i2c_ite_it51xxx.c. The copy loop stores to target_in_buffer[i + data->w_index] and only checks data->w_index against sizeof(data->target_in_buffer) after the write has already completed, so the bounds check cannot prevent the overflow. The running index data->w_index accumulates count bytes on every FIFO-fill interrupt of an ongoing transaction and is reset to zero only on a STOP or timeout condition. An I2C host that streams a single write transaction longer than the buffer (default CONFIG_I2C_TARGET_IT51XXX_MAX_BUF_SIZE = 256 bytes) drives data->w_index past the end of the buffer, and each subsequent host byte is written out of bounds into the adjacent data->target_out_buffer and following static device data. The trigger is a malicious or misbehaving I2C master on the same bus (for example a compromised application processor or a rogue device on an exposed I2C bus); no software privilege on the
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 14, 2026The ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(&priv->suspended_work, suspended_handler) insCVE-2026-16148 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 4.6
The ITE it82xx2 USB device-controller driver initialized its bus-suspend detection work with k_work_init_delayable(&priv->suspended_work, suspended_handler) inside it82xx2_enable() (the driver's .enable op) in drivers/usb/udc/udc_it82xx2.c. This work item is scheduled essentially continuously while the USB bus is active: the interrupt handler reschedules it on every SOF frame and suspended_handler() reschedules itself, so its timeout node is normally linked in the kernel timeout list / a workqueue pending queue. k_work_init_delayable() (kernel/work.c) unconditionally overwrites the entire k_work_delayable structure, including its timeout and queue linkage, with no busy check. Because it82xx2_disable() does not cancel the work, a normal disable-then-enable cycle re-runs api->enable() (udc_enable() only rejects a redundant enable, not a re-enable after disable) and re-initializes the still-pending work in place, corrupting the kernel timeout/workqueue linked lists and causing a kernel panic. An external USB host — for example a host performing USB DFU detach (dfu-util --detach) or forcing repeated attach/reset/re-enumeration — drives the udc_disable()/udc_enable() transitions and c
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 14, 2026The ITE IT82xx2 USB device-controller driver (drivers/usb/udc/udc_it82xx2.c) mishandles multi-packet OUT transfers on non-control endpoints.CVE-2026-16147 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.8
The ITE IT82xx2 USB device-controller driver (drivers/usb/udc/udc_it82xx2.c) mishandles multi-packet OUT transfers on non-control endpoints. In work_handler_out() the active transfer buffer is obtained with udc_buf_peek() (which does not dequeue it); when a full max-packet-size packet arrives but the buffer still has tailroom (the transfer is not yet complete), the pre-fix code both re-arms the endpoint to keep filling that same buf via work_handler_xfer_continue() and simultaneously hands the same, still-being-filled buffer to the upper stack with udc_submit_ep_event(). Because udc_submit_ep_event() transfers ownership of the buffer to the USB device stack (usbd_event_carrier() appends &buf->node to uds_ctx->ep_events, after which the class handler processes and net_buf_unref()s it), the driver continues to DMA subsequent host-controlled OUT packets into a buffer the upper stack may already have freed and recycled — a use-after-free write. In addition, since the buffer was never dequeued, the completing packet runs udc_buf_get() on the same object and submits it a second time, appending &buf->node to the event slist twice (singly-linked-list corruption) and causing a double net_b
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 14, 2026Zephyr's TLS socket layer in subsys/net/lib/sockets/sockets_tls.c keeps a single process-global array, client_cache, of cached client sessions that is shared byCVE-2026-15924 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.9
Zephyr's TLS socket layer in subsys/net/lib/sockets/sockets_tls.c keeps a single process-global array, client_cache, of cached client sessions that is shared by every TLS socket context. The functions that mutate and read it — tls_session_save(), tls_session_get(), tls_session_cache_reset(), and the settings restore handler — allocate, free, and dereference each entry's heap buffer (entry->session). Before the fix these accesses were serialized only by the per-socket context mutex ctx->lock (assigned per socket in ctx_set_lock()), which provides no mutual exclusion between different sockets touching the shared cache. Because CONFIG_NET_SOCKETS_TLS_MAX_CLIENT_SESSION_COUNT defaults to 1, any two concurrent client sockets contend for the same slot. A thread in tls_session_get() reading entry->session inside mbedtls_ssl_session_load() can run concurrently with another thread in tls_session_save() that selects the same entry for reuse and executes mbedtls_free(entry->session) before reallocating — a use-after-free read, and a double-free when two saves evict the same entry. Both corrupt the mbedTLS heap. The cache is reached on ordinary client paths: at connect time via tls_session_st
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 14, 2026net_if_ipv6_calc_reachable_time() in subsys/net/ip/net_if.c derives a randomized ND reachable time from ipv6->base_reachable_time as min_reachable + sys_rand32_CVE-2026-15893 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.5
net_if_ipv6_calc_reachable_time() in subsys/net/ip/net_if.c derives a randomized ND reachable time from ipv6->base_reachable_time as min_reachable + sys_rand32_get() % (max_reachable - min_reachable), where min_reachable = base/2 and max_reachable = 3*base/2 using integer division. When base_reachable_time is 1, both min_reachable and the modulus collapse so the function returns 0, and net_if_ipv6_set_reachable_time() stores that 0 into ipv6->reachable_time. The base_reachable_time is attacker-controlled: handle_ra_input() in subsys/net/ip/ipv6_nbr.c accepts the Reachable Time field of an incoming Router Advertisement whenever it is nonzero and <= MAX_REACHABLE_TIME, so a single unauthenticated, link-local RA carrying a Reachable Time of 1 drives the computed reachable time to 0. Router Advertisements are unauthenticated by default and require only adjacency to the target link. When a neighbor is subsequently confirmed reachable, net_ipv6_nbr_set_reachable_timer() reads the value and executes NET_ASSERT(time, "Zero reachable timeout!"). On builds with CONFIG_ASSERT enabled this triggers a fatal kernel assertion — a remote denial of service; on builds without assertions the reacha
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 14, 2026The Zephyr SDIO subsystem function sdio_io_rw_extended_helper() in subsys/sd/sdio.c finishes transfers with a byte-I/O loop that uses size = MIN(remaining, funcCVE-2026-15923 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 4.6
The Zephyr SDIO subsystem function sdio_io_rw_extended_helper() in subsys/sd/sdio.c finishes transfers with a byte-I/O loop that uses size = MIN(remaining, func->cis.max_blk_size) as the per-iteration step. The value func->cis.max_blk_size is decoded directly from the SDIO card's CIS FUNCE tuple in sdio_decode_cis() and is not validated. When a card reports a maximum block size of zero, size is always 0, remaining never decreases, and the loop spins forever. The loop is reached from the public SDIO client API used by drivers, including sdio_read_fifo(), sdio_write_fifo(), and the incrementing register read/write helpers, each of which enters the loop while holding the per-card mutex func->card->lock. A card advertising max_blk_size == 0 therefore hangs the calling thread permanently on its first non-block-aligned transfer and never releases the mutex, denying service to the SDIO peripheral (and any subsystem such as Wi-Fi that depends on it) until the device is reset. The malicious value must come from the SDIO card itself, so the defect is exploitable where a removable SDIO/combo card slot lets an attacker insert a crafted or malfunctioning card (a physical attack vector); on bo
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 13, 2026The mcumgr SMP settings-management group handlers settings_mgmt_read(), settings_mgmt_write(), and settings_mgmt_delete() in subsys/mgmt/mcumgr/grp/settings_mgmCVE-2026-15892 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.3
The mcumgr SMP settings-management group handlers settings_mgmt_read(), settings_mgmt_write(), and settings_mgmt_delete() in subsys/mgmt/mcumgr/grp/settings_mgmt/src/settings_mgmt.c allocate a key_name buffer (and, for read, a data buffer) via k_malloc() when CONFIG_MCUMGR_GRP_SETTINGS_BUFFER_TYPE_HEAP is enabled, relying on the end: label to k_free() them. When CONFIG_MCUMGR_GRP_SETTINGS_ACCESS_HOOK is also enabled and the application access hook rejects a request by returning status MGMT_CB_ERROR_RC, the handler executed return ret_rc; directly, bypassing end: and leaking the heap allocation on every rejected request. The settings handlers are reachable over the unauthenticated SMP transport (Bluetooth LE, UART, or UDP, depending on product configuration). The access hook is the mechanism applications use to deny unauthorized settings access, and MGMT_CB_ERROR_RC is a common rejection style, so an attacker who can send settings read/write/delete commands that the hook rejects triggers a heap leak on each attempt. Because the leaked memory is never reclaimed until reboot, a sustained stream of rejected requests monotonically exhausts the kernel heap until k_malloc() fails, denyi
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 13, 2026The MQTT-SN client keepalive handler process_ping() in subsys/net/lib/mqtt_sn/mqtt_sn.c removes the gateway record after PINGREQ retries are exhausted.CVE-2026-15891 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.5
The MQTT-SN client keepalive handler process_ping() in subsys/net/lib/mqtt_sn/mqtt_sn.c removes the gateway record after PINGREQ retries are exhausted. It invoked SYS_SLIST_PEEK_HEAD_CONTAINER(&client->gateways, gw, next) but discarded the result. That macro is a pure expression that does not assign to gw, so gw retained its NULL initializer regardless of the list contents. The code then dereferences the NULL gw (gw->gw_id) and passes it to mqtt_sn_gw_destroy(), reaching k_mem_slab_free(&gateways, NULL). With CONFIG_MEM_SLAB_POINTER_VALIDATE enabled this triggers k_panic(); in the default configuration it performs a write through the NULL pointer ((char )mem = slab->free_list;) and corrupts the slab free list. The outcome is a crash/kernel panic or, on targets where address 0 is writable, silent memory-allocator corruption. The vulnerable branch runs whenever the connected MQTT-SN gateway fails to answer keepalive PINGREQs for the configured number of retries. This condition is controlled by the remote peer: a malicious or compromised gateway, or an on-path/adjacent attacker that advertises itself as a gateway and then stops responding (or blackholes the real gateway's PINGRESPs)
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 10, 2026The Sierra Wireless HL78xx modem GNSS driver (drivers/modem/hl78xx/, later drivers/modem/vendor_standalone/hl78xx/) embeds a generic struct gnss_nmea0183_match_CVE-2026-15461 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.3
The Sierra Wireless HL78xx modem GNSS driver (drivers/modem/hl78xx/, later drivers/modem/vendor_standalone/hl78xx/) embeds a generic struct gnss_nmea0183_match_data match_data inside struct hl78xx_gnss_data. The generic NMEA0183 match helper (drivers/gnss/gnss_nmea0183_match.c) requires that context to be the first member because its callbacks cast user_data directly to struct gnss_nmea0183_match_data . In the affected releases match_data was the second member (after const struct device dev), so it sat at a non-zero offset while gnss_nmea0183_match_init() initialized it at the correct address. The registered NMEA handlers instead pass the whole device data object (data->devices.gnss->data, offset 0), producing an offset-shifted type confusion between where state is initialized and where the parse callbacks read and write it. When NMEA sentences from the GNSS receiver are parsed, the GGA/RMC callbacks write parsed fix data into the wrong location within the struct, and the GSV callback (gnss_nmea0183_match_gsv_callback, active under CONFIG_GNSS_SATELLITES) reads its satellites pointer and bound from the wrong offsets — non-pointer bytes of struct hl78xx_gnss_data — and then writes
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 9, 2026The Bluetooth Classic (BR/EDR) L2CAP receive handler bt_l2cap_br_recv() in subsys/bluetooth/host/classic/l2cap_br.c dispatched inbound data PDUs based only on tCVE-2026-15460 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.4
The Bluetooth Classic (BR/EDR) L2CAP receive handler bt_l2cap_br_recv() in subsys/bluetooth/host/classic/l2cap_br.c dispatched inbound data PDUs based only on the destination channel ID, without checking that the target channel had reached the BT_L2CAP_CONNECTED state. A dynamic channel is assigned its RX CID and added to the connection's channel list while still in BT_L2CAP_CONNECTING (and later BT_L2CAP_CONFIG) — before configuration completes and, for PSMs that require security, before the peer is authenticated (l2cap_br_conn_req()). Because the channel is already findable by bt_l2cap_br_lookup_rx_cid() during this window, a remote peer within radio range can send a data PDU addressed to that CID and have it processed on a not-yet-established channel. The dispatch keys off channel fields (BR_CHAN(chan)->rx.mode, rx.mps) that are only initialized during configuration by l2cap_br_conf(); since channel objects are pooled and bt_l2cap_br_chan_del() does not reset rx.mode or the reassembly buffer _sdu, a reused channel can carry stale state into the CONNECTING window and route the frame into the retransmission/flow-control path (bt_l2cap_br_ret_fc_recv()) with stale parameters and a
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Sep 8, 2026Zephyr Project Manager: Stored Cross-Site ScriptingCVE-2026-76931 · WordPress plugins & themes · reported by WordfenceMedium 6.4
The Zephyr Project Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘message’ parameter in all versions up to, and including, 3.3.205 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Custom-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The vulnerability can only be exploited when the 'Directly link to project' plugin setting is disabled.
Product
Zephyr Project Manager
Affected
up to 3.3.205
What to do
Affects up to 3.3.205. Update Zephyr Project Manager to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD record plugins.trac.wordpress.org plugins.trac.wordpress.org
Aug 31, 2026net_ipv6_send_ns() in subsys/net/ip/ipv6_nbr.c allocates a transmit net_pkt for a Neighbor Solicitation.CVE-2026-14697 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.5
net_ipv6_send_ns() in subsys/net/ip/ipv6_nbr.c allocates a transmit net_pkt for a Neighbor Solicitation. When it is called with a data packet pending on an unresolved neighbor and that neighbor's pending_queue is already non-empty (an NS is already outstanding), the function appends the data packet and returns early without ever sending the NS via net_send_data() or releasing it with net_pkt_unref(). The freshly allocated NS net_pkt and its attached TX buffers are held only by a local variable and are leaked permanently, never returning to CONFIG_NET_PKT_TX_COUNT / CONFIG_NET_BUF_TX_COUNT. The leaking branch sits on the normal IPv6 transmit path: net_ipv6_prepare_for_send() (called from net_if.c) invokes net_ipv6_send_ns() for any outbound or forwarded IPv6 packet whose next hop is not yet in the neighbor cache. An on-link (adjacent) attacker can drive it deterministically by sending a burst of request packets (for example ICMPv6 echo requests or UDP datagrams) that all spoof a single non-existent on-link source address: the node generates a reply to each, the first reply queues an NS, and every subsequent reply during the roughly three-second INCOMPLETE resolution window takes th
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 31, 2026When Ethernet bridging is enabled (CONFIG_NET_ETHERNET_BRIDGE), eth_bridge_input_process() in subsys/net/l2/ethernet/bridge/bridge_input.c decides how each framCVE-2026-14696 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.5
When Ethernet bridging is enabled (CONFIG_NET_ETHERNET_BRIDGE), eth_bridge_input_process() in subsys/net/l2/ethernet/bridge/bridge_input.c decides how each frame received on a bridge member interface is handled. For frames that must also be delivered to the local stack, the code called eth_bridge_handle_locally() and returned NET_OK. That helper does not consume the packet — it only calls bridge_iface_recv() (via virtual_recv()), which returns NET_CONTINUE without taking ownership of pkt. The NET_OK verdict then propagates through ethernet_recv() up to processing_data() in subsys/net/ip/net_core.c, where NET_OK is interpreted as "the packet was consumed, do not free it." Because no consumer actually took ownership, the RX net_pkt is never returned to the pool and is leaked. The concretely reproducible leak occurs for frames whose EtherType has no registered L3 handler when CONFIG_NET_ETHERNET_FORWARD_UNRECOGNISED_ETHERTYPE is set (default y when CONFIG_NET_SOCKETS_PACKET is enabled): the fall-through L3 dispatch does not overwrite the NET_OK verdict, so ethernet_recv() returns NET_OK and the buffer is never released. Any device on a bridged L2 segment can emit broadcast/multicast
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 31, 2026The LwM2M JSON content formatter's get_string() in subsys/net/lib/lwm2m/lwm2m_rw_json.c copies a parsed JSON string into a caller-supplied buffer and NUL-terminCVE-2026-14368 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.4
The LwM2M JSON content formatter's get_string() in subsys/net/lib/lwm2m/lwm2m_rw_json.c copies a parsed JSON string into a caller-supplied buffer and NUL-terminates it. The length guard used if (string_length > buflen), which accepts a string whose length is exactly buflen. After memcpy() fills the whole buffer, buf[string_length] = '\0' then writes one byte past the end of the buffer (CWE-787). The string value and its length are taken directly from the incoming CoAP payload during a LwM2M WRITE: do_write_op_json() parses the payload obtained from coap_packet_get_payload(), and get_string() is invoked from lwm2m_write_handler() (engine_get_string() in subsys/net/lib/lwm2m/lwm2m_message_handling.c) for a LWM2M_RES_TYPE_STRING resource. The destination buf/buflen is either the resource instance's fixed data buffer (res_inst->data_ptr/max_data_len) or the engine validation buffer (msg->ctx->validate_buf). A LwM2M server (the client's DTLS peer) can therefore write a string resource with a value whose length equals the target buffer size and force a one-byte overflow. The overflow is a single out-of-bounds write of the constant byte 0x00 immediately past the resource or validation b
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 31, 2026The I3C IBI subsystem in drivers/i3c/i3c_ibi_workq.c hands out statically-allocated work nodes through a free-list i3c_ibi_work_nodes_free implemented as a plaiCVE-2026-14367 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgLow 3.1
The I3C IBI subsystem in drivers/i3c/i3c_ibi_workq.c hands out statically-allocated work nodes through a free-list i3c_ibi_work_nodes_free implemented as a plain sys_slist_t, which provides no synchronization. The allocation helpers (i3c_ibi_work_enqueue, i3c_ibi_work_enqueue_target_irq, i3c_ibi_work_enqueue_hotjoin, i3c_ibi_work_enqueue_controller_request, i3c_ibi_work_enqueue_cb) called sys_slist_get() directly from ISR context, while the workqueue handler i3c_ibi_work_handler() returned nodes with sys_slist_append() from the workqueue thread, with no lock on either side. Because sys_slist_get() and sys_slist_append() are neither atomic nor interrupt-safe, an IBI interrupt that fires while the workqueue thread is mid-append (or a truly parallel access under CONFIG_SMP) races on the shared list. This corrupts the list linkage: a node may be handed to two consumers, a node may be lost, or the head/tail pointers may be left inconsistent so sys_slist_get() returns a stale or garbage pointer. In the double-hand-out case the subsequent memcpy(ibi_node, ibi_work, sizeof(*ibi_node)) overwrites a node still in flight; a garbage pointer turns the same memcpy into an out-of-bounds write.
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 31, 2026The Silicon Labs SiWx917 WiFi driver's transmit callback siwx91x_send() in drivers/wifi/siwx91x/siwx91x_wifi.c frees a network packet it does not own.CVE-2026-14366 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.4
The Silicon Labs SiWx917 WiFi driver's transmit callback siwx91x_send() in drivers/wifi/siwx91x/siwx91x_wifi.c frees a network packet it does not own. In the Zephyr TX path the net_pkt is owned by the L2/networking stack; the driver only borrows it to copy the frame bytes into a local net_buf. Before the fix, after transmitting, siwx91x_send() additionally called net_pkt_unref(pkt) on the caller-owned packet, dropping its last reference and returning it to the shared packet pool prematurely. This code path is compiled in by default (CONFIG_WIFI_SILABS_SIWX91X_NET_STACK_NATIVE). The caller, ethernet_send() in subsys/net/l2/ethernet/ethernet.c, keeps using the packet after the driver returns: it reads net_pkt_get_len(pkt), updates TX statistics, and then performs its own net_pkt_unref(pkt). Because the driver already released the packet, these are use-after-free reads followed by a second unref (a double free). When concurrent network activity recycles the freed slab slot between the two unrefs, the trailing unref decrements a different, live packet's reference count and frees it, corrupting the net_pkt pool shared by both the receive and transmit paths. The defect is exercised by
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 28, 2026Zephyr's WireGuard implementation in subsys/net/lib/wireguard/wg_crypto.c mishandled keepalive packets.CVE-2026-13735 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgLow 3.7
Zephyr's WireGuard implementation in subsys/net/lib/wireguard/wg_crypto.c mishandled keepalive packets. In wg_process_data_message(), any type-4 transport-data message whose payload was exactly 16 bytes (an empty plaintext plus a bare Poly1305 tag, i.e. a keepalive) was accepted and returned immediately, before wg_decrypt_packet() was ever called. The Poly1305 authentication tag was therefore never verified; the only preceding gates were a cleartext receiver-index lookup (get_peer_keypair_for_index() on the attacker-supplied data_hdr->receiver) and a non-cryptographic keypair validity/expiry check. The path is reachable entirely from the network: inbound UDP on the WireGuard port is dispatched by wg_input() to handle_transport_data() and then wg_process_data_message(). The 32-bit receiver index is transmitted in cleartext in WireGuard handshake and data messages, so an on-path observer learns it directly and an off-path attacker can brute-force it against the UDP port. Given an active receiving-valid session for that index, an attacker could send a 16-byte garbage payload and have it accepted without possessing the session key. On acceptance the unauthenticated message caused the
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 28, 2026Zephyr's WireGuard VPN data-plane receive handler wg_process_data_message() in subsys/net/lib/wireguard/wg_crypto.c validated the anti-replay counter too late.CVE-2026-13734 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.5
Zephyr's WireGuard VPN data-plane receive handler wg_process_data_message() in subsys/net/lib/wireguard/wg_crypto.c validated the anti-replay counter too late. After AEAD decryption of a MESSAGE_TRANSPORT_DATA packet succeeded, the code committed several peer-state changes — update_peer_addr() (endpoint roaming update), the keypair->last_rx/peer->last_rx liveness timers, and keypair_update() (promote next→current and destroy the previous keypair) — and only afterward called wg_check_replay(). On a replayed packet the replay check returned -EINVAL, but none of the preceding mutations were rolled back. The AEAD tag authenticates content but not freshness, so a replayed-but-authentic transport packet decrypts correctly. An attacker who captures one valid ciphertext off the wire (an on-path or shared-medium observer) can re-inject it from an arbitrary spoofed source address. Reaching the handler requires no credentials: it is driven directly from inbound UDP datagrams via the dispatch in subsys/net/lib/wireguard/wg.c. Because the state mutations committed before the replay check, the replay repoints the peer endpoint to the attacker-chosen source address (roaming hijack), redirecting
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 26, 2026The IEEE 1588 PTP management-message parser in subsys/net/lib/ptp/tlv.c mishandles the PTP_MGMT_TIME management id.CVE-2026-13481 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.4
The IEEE 1588 PTP management-message parser in subsys/net/lib/ptp/tlv.c mishandles the PTP_MGMT_TIME management id. In tlv_mgmt_post_recv(), the PTP_MGMT_TIME case casts mgmt_tlv->data to a 10-byte struct ptp_timestamp and reads it (then byte-swaps and writes it back) without first checking that the TLV data field is at least sizeof(struct ptp_timestamp). Every sibling management id in the same switch validates its length first; PTP_MGMT_TIME was the only case lacking that check. The length passed in is the management data size (tlv->length - 2), and the upstream guard in ptp_tlv_post_recv() only requires tlv->length > 2, while msg_tlv_post_recv() validates only that the TLV fits within the received byte count, not a per-id minimum. A peer on the local PTP segment can therefore send a PTP_MSG_MANAGEMENT message carrying a short PTP_MGMT_TIME TLV (data as small as 2 bytes), causing the parser to read and write 8 bytes beyond the validated data. The message type and TLV contents are taken straight off the wire, so the path is reachable by any adjacent attacker when CONFIG_PTP is enabled. The over-read and write-back stay within the struct ptp_msg allocation (mgmt_tlv->data lives in
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 26, 2026The LoRaWAN TS004 Fragmented Data Block Transport handler frag_transport_package_callback() in subsys/lorawan/services/frag_transport.c parses downlink command CVE-2026-13480 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgLow 3.1
The LoRaWAN TS004 Fragmented Data Block Transport handler frag_transport_package_callback() in subsys/lorawan/services/frag_transport.c parses downlink command bytes without validating that enough payload bytes remain before each access. The loop's only bound is rx_pos < len; after consuming the one-byte command id the handler cast rx_buf + rx_pos to a 10-byte struct frag_transport_setup_req, and for a DATA_FRAGMENT command passed &rx_buf[rx_pos] to the fragment decoder, which reads exactly ctx.frag_size bytes — with no remaining-length check in either case. The fragment size is attacker-chosen in a preceding FRAG_SESSION_SETUP command (ctx.frag_size = req->frag_size, capped at CONFIG_LORAWAN_FRAG_TRANSPORT_MAX_FRAG_SIZE, default 232). rx_buf aliases the 255-byte static MacCtx.RxPayload buffer in the loramac-node MAC layer, while len is the actual decrypted payload length. By padding a downlink with mismatched-index DATA_FRAGMENT filler commands (each advancing rx_pos by three bytes without producing an answer) and appending one matching-index fragment near the end of the payload, an attacker can make the decoder read up to roughly frag_size bytes past the end of RxPayload, copyin
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 26, 2026The LoRaWAN application-layer clock-synchronization service parses downlinks in clock_sync_package_callback() (subsys/lorawan/services/clock_sync.c).CVE-2026-13479 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgLow 3.1
The LoRaWAN application-layer clock-synchronization service parses downlinks in clock_sync_package_callback() (subsys/lorawan/services/clock_sync.c). Its command loop only guarantees that the one-byte command id is in bounds; for the CLOCK_SYNC_CMD_APP_TIME (AppTimeAns) command the handler then reads a 4-byte time correction via sys_get_le32() plus a 1-byte token without checking that 5 bytes remain in the receive buffer (len - rx_pos). A short or crafted AppTimeAns therefore reads up to 5 bytes past the end of the decrypted payload. The payload (rx_buf/len) is the decrypted application frame delivered to the registered downlink callback (mcps_indication->Buffer/BufferSize). Reaching the handler requires a frame on the clock-sync port that passes LoRaWAN's MAC integrity check and FRMPayload decryption, so the practical attacker is a malicious or compromised network/application server (the designated sender of AppTimeAns) or a party holding the session keys, rather than an arbitrary radio listener. The over-read is bounded: the backing store is a fixed 255-byte static buffer, so the few stray bytes do not fault, and the read values (time_correction, token) are used only internally
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 25, 2026The Zephyr ext2 filesystem driver validates the on-disk block bitmap in ext2_init_fs() (subsys/fs/ext2/ext2_impl.c) by passing fs_blocks = s_blocks_count - s_fiCVE-2026-13478 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.5
The Zephyr ext2 filesystem driver validates the on-disk block bitmap in ext2_init_fs() (subsys/fs/ext2/ext2_impl.c) by passing fs_blocks = s_blocks_count - s_first_data_block to ext2_bitmap_count_set(). That helper (subsys/fs/ext2/ext2_bitmap.c) treats its argument as a number of bits and reads one bitmap byte per eight bits, but the bitmap buffer (BGROUP_BLOCK_BITMAP) is a single fetched block of only fs->block_size bytes (capacity fs->block_size * 8 bits). s_blocks_count and s_first_data_block are taken verbatim from the superblock and were never bounded against this single-group capacity; ext2_verify_disk_superblock() checks the magic, revision, and block-size shift but not the block count. A crafted ext2 image with an oversized s_blocks_count (up to ~4 billion, against a maximum 4096-byte block / 32768-bit bitmap) makes ext2_bitmap_count_set() scan roughly 512 MB of memory past the bitmap block — a large out-of-bounds read of the static block slab and adjacent memory. The defect is reached during mount: ext2_init_fs() is invoked from ext2_mount() (subsys/fs/ext2/ext2_ops.c), the registered .mount operation. Any path that mounts an attacker-supplied ext2 image (removable media
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 25, 2026The OCPP 1.6 client in subsys/net/lib/ocpp/ocpp.c reconstructs a session handle and PDU id from the uid field of a CALLRESULT message.CVE-2026-13217 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.9
The OCPP 1.6 client in subsys/net/lib/ocpp/ocpp.c reconstructs a session handle and PDU id from the uid field of a CALLRESULT message. In ocpp_process_server_msg() the code calls atoi(strtok_r(uid, "-", &tmp)) without checking the strtok_r return value. When the server-supplied uid is empty or contains no - delimiter, strtok_r() returns NULL and atoi(NULL) dereferences a NULL pointer, which is undefined behaviour. The uid originates from network data: parse_rpc_msg() in subsys/net/lib/ocpp/ocpp_j.c JSON-parses a frame received from the OCPP central system over TCP/WebSocket and copies the server-controlled string into the local buffer. A malicious or compromised central system, or a man-in-the-middle on a non-TLS ws:// connection, can return a malformed uid to reach the defect. No authentication beyond the existing server connection (or MITM position) is required, and the reconstructed pointer is membership-validated by ocpp_session_is_valid(), so the impact is limited to the NULL dereference rather than arbitrary pointer use. On Zephyr targets that trap access to address 0 (MMU/MPU platforms or CONFIG_NULL_POINTER_EXCEPTION_DETECTION), the dereference faults inside the OCPP read
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 25, 2026The virtio PCI driver (drivers/virtio/virtio_pci.c) parses a device's PCI capability list during driver initialization.CVE-2026-13216 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.1
The virtio PCI driver (drivers/virtio/virtio_pci.c) parses a device's PCI capability list during driver initialization. In virtio_pci_read_cap() the device-supplied capability length byte cap_len (read from PCI config space via pcie_conf_read()) was only checked with assert(tmp.cap_len == cap_struct_size). That assert resolves to __ASSERT_NO_MSG(), gated by CONFIG_ASSERT, which defaults off in production builds, so the value reached the copy logic completely unvalidated. The length then drives a loop that copies extra capability dwords into a fixed-size stack buffer supplied by the caller. A cap_len below the 24-byte base struct virtio_pci_cap underflows the unsigned extra_data_words count to a near-SIZE_MAX value, producing an effectively unbounded stack write; a cap_len above the caller's buffer (up to 255) writes up to roughly 228 bytes of device-controlled data past the buffer. Both are out-of-bounds writes of attacker-controlled content executed in kernel mode during boot-time device probe. The input originates from the virtio device. In the common deployment where Zephyr runs as a guest under a hypervisor, the device backend is the host, which already fully outranks the gue
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 25, 2026The Zephyr ext2 filesystem driver fails to validate the s_log_block_size field of the on-disk superblock when mounting a filesystem.CVE-2026-13215 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.8
The Zephyr ext2 filesystem driver fails to validate the s_log_block_size field of the on-disk superblock when mounting a filesystem. ext2_verify_disk_superblock() in subsys/fs/ext2/ext2_impl.c checks the magic number, revision, inode size and group counts, but never bounds s_log_block_size. On a successful verify, subsys/fs/ext2/ext2_ops.c computes fs->block_size = 1024 << superblock.s_log_block_size from this attacker-controlled uint32_t, so a crafted value either overflows the shift (undefined behaviour) or yields a block size far larger than CONFIG_EXT2_MAX_BLOCK_SIZE. That block size is then passed to k_mem_slab_init() by ext2_init_blocks_slab() to carve CONFIG_EXT2_MAX_BLOCK_COUNT blocks out of the fixed static buffer __ext2_block_memory_buffer, whose size is CONFIG_EXT2_MAX_BLOCK_COUNT * CONFIG_EXT2_MAX_BLOCK_SIZE. k_mem_slab_init() does not verify that the requested blocks fit the buffer, and the ext2 wrapper discards its return value, so the slab is laid out past the end of the static buffer. The mount immediately reads block-group, bitmap and inode blocks of fs->block_size bytes each into these slab blocks, producing an out-of-bounds write into adjacent static memory on t
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Aug 25, 2026The OCPP 1.6 client in subsys/net/lib/ocpp/ocpp_j.c contains a stack buffer overflow in parse_getconfig_msg().CVE-2026-13214 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgCritical 9.8
The OCPP 1.6 client in subsys/net/lib/ocpp/ocpp_j.c contains a stack buffer overflow in parse_getconfig_msg(). When handling a GetConfiguration request from the central system, the handler copied the attacker-controlled JSON "key" string into the caller's fixed 50-byte stack buffer (skey[CISTR50], declared in subsys/net/lib/ocpp/ocpp.c) using an unbounded strcpy(). The parsed key value points directly into the receive buffer, so its length is bounded only by the message size (CONFIG_OCPP_RECV_BUFFER_SIZE, default 2048). The GetConfiguration message is delivered over the WebSocket connection that the charge point opens to its configured central system. The reader thread ocpp_wsreader() reads the message into ui->recv_buf and dispatches it to parse_getconfig_msg() via the PDU function table. An attacker who controls the central system endpoint, or a man-in-the-middle on an unencrypted connection, can send a GetConfiguration request whose "key" field exceeds 50 bytes and overflow the reader thread's stack with attacker-chosen bytes. The consequence is a remotely triggerable stack smash on the OCPP reader thread: at minimum a denial of service, and plausibly remote code execution dep
Product
zephyr
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Vulnerability database

The flaws that hit local websites, every Friday.

Tell us what you're building.