Vulnerability database

3,304 results · page 2 of 67

• Oct 18, 2026Seven Gitea API routes under `/api/v1/users/{username}` (followers, following, following/{target}, starred, subscriptions, keys and gpg_keys) were registered wiCVE-2026-97859 · Other software · Gitea · reported by 88ee5874-cf24-4952-aea0-31affedb7ff2Medium 6.5

  Seven Gitea API routes under `/api/v1/users/{username}` (followers, following, following/{target}, starred, subscriptions, keys and gpg_keys) were registered without the `individualPermsChecker` middleware that enforces the visibility of the target user. An authenticated user could therefore read the followers, following list, starred and watched repositories and public SSH and GPG keys of a user with limited or private visibility, whom they could not otherwise see. The issue was fixed in 1.27.3 and 28.0.0 and disclosed with 28.2.0.

  Product

  Gitea

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordblog.gitea.comgithub.com

• Oct 18, 2026`POST /{owner}/{repo}/topics` was registered without the sign-in middleware that provides the cross-origin protection, so a request issued by a third-party siteCVE-2026-107618 · Other software · Gitea · reported by 88ee5874-cf24-4952-aea0-31affedb7ff2

  `POST /{owner}/{repo}/topics` was registered without the sign-in middleware that provides the cross-origin protection, so a request issued by a third-party site was not rejected. A repository administrator who visited a malicious page could have the topics of their repository changed. No other repository settings were reachable through this route.

  Product

  Gitea

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordblog.gitea.comgithub.com

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: fprobe: Use guard(rcu_sched_notrace) and check rcu_is_watching() unregister_fprobe() and uCVE-2026-98861 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: fprobe: Use guard(rcu_sched_notrace) and check rcu_is_watching() unregister_fprobe() and unregister_fprobe_async() (used by BPF kprobe-multi) rely on standard RCU grace periods (synchronize_rcu() and call_rcu()) to wait until in-flight fprobe handlers complete before freeing the fprobe. However, if an fprobe handler executes while RCU is not watching (such as in the idle loop or nohz_full extended quiescent states), standard RCU does not track preemption-disabled sections. Consequently, synchronize_rcu() does not wait for those executions, which can lead to a use-after-free if the fprobe is freed immediately after unregistration. Ensure handlers exit early when !rcu_is_watching(). Furthermore, fprobe_fgraph_entry() and fprobe_ftrace_entry() previously used guard(rcu)() and rcu_read_lock(), which invoke lockdep on every hit under CONFIG_PROVE_LOCKING. This adds overhead and can cause lockdep recursion if probed functions interact with lockdep. Since rhltable_lookup() and rhl_for_each_entry_rcu() use rcu_dereference_all_check() (which checks rcu_read_lock_any_held()), holding preemption disabled via rcu_read_loc

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: of/overlay: only treat a positive changeset id as registered of_overlay_fdt_apply() storesCVE-2026-98854 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: of/overlay: only treat a positive changeset id as registered of_overlay_fdt_apply() stores the idr_alloc() return value in ovcs->id before checking it. On failure the stored id is negative, free_overlay_changeset()'s "if (ovcs->id)" check passes, idr_remove() is called with a negative id and list_del() runs on ovcs->ovcs_list, which is not initialized until after the id allocation. An allocation failure at that point dereferences NULL. Make free_overlay_changeset() treat only a strict-positive id as registered. The rest of the function already copes with a partially-initialized ovcs, so the error path stays a plain goto err_free_ovcs.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: pfcp: fix socket lifetime on netdevice registration failure pfcp_newlink() creates the UDPCVE-2026-98849 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: pfcp: fix socket lifetime on netdevice registration failure pfcp_newlink() creates the UDP socket before register_netdevice(). If registration fails after pfcp_dev_init() succeeds, the core calls pfcp_dev_uninit(), which releases the socket and clears pfcp->sk. The newlink error path then releases it again, causing a NULL pointer dereference. This was observed with failslab fault injection: FAULT_INJECTION: forcing a failure. kobject: kobject_add_internal failed for pfcp0 (error: -12 parent: net) BUG: KASAN: null-ptr-deref in udp_tunnel_sock_release+0x1c/0x50 Read of size 8 at addr 0000000000000120 by task ip/1037 Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x78/0x90 print_report+0x468/0x5cc kasan_report+0xa4/0xf0 __asan_load8+0x7c/0xd0 udp_tunnel_sock_release+0x1c/0x50 pfcp_newlink+0x128/0x184 rtnl_newlink+0x848/0xe44 rtnetlink_rcv_msg+0x468/0x514 netlink_rcv_skb+0xc0/0x1f0 rtnetlink_rcv+0x18/0x24 netlink_unicast+0x4b8/0x558 netlink_sendmsg+0x2b8/0x584 ... Return from pfcp_del_sock() if pfcp->sk is NULL.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: virt: vmgenid: set driver_data before registering notification handlers Both probe paths rCVE-2026-98841 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: virt: vmgenid: set driver_data before registering notification handlers Both probe paths register their notification handler before assigning driver_data, which the handler dereferences. In the devicetree path, the notification IRQ can fire as soon as devm_request_irq() registers the handler: the interrupt may already be pending at probe time, for example when a VMM injects the generation-changed notification while restoring a guest from a snapshot that was taken before the driver had probed (Firecracker does exactly this on snapshot restore). The IRQ is also requested with IRQF_SHARED, so another device sharing the line can trigger the handler just as early. The handler then calls vmgenid_notify(), which dereferences the still-NULL driver_data and panics: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.38+ #1 PREEMPT(none) Hardware name: linux,dummy-virt (DT) pc : vmgenid_notify.isra.0+0x24/0x8c lr : vmgenid_of_irq_handler+0x14/0x34 Call trace: vmgenid_notify.isra.0+0x24/0x8c (P) vmgenid_of_irq_handler+

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: unregister the input device when probe fails setup_card() registers the inputCVE-2026-98837 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: unregister the input device when probe fails setup_card() registers the input device, whose name and phys point into struct snd_usb_caiaqdev, and then goes on to snd_card_register() and snd_usb_caiaq_control_init(). If either fails, snd_probe() calls snd_card_free(), which frees the device state but leaves the input device registered: card_free() only clears the pointer, and the input device is unregistered from snd_disconnect() alone. Reading its "uevent" attribute afterwards dereferences freed memory: BUG: KASAN: slab-use-after-free in string+0x4a9/0x4f0 Read of size 1 at addr ffff8880208f5043 by task caiaq/4967 add_uevent_var+0x183/0x3a0 input_dev_uevent+0x162/0x900 dev_uevent+0x2f1/0x870 uevent_show+0x1ca/0x3a0 ... Unregister the input device on the probe error path, as snd_disconnect() does. snd_usb_caiaq_input_disconnect() is a no-op when no input device was registered. Reproduced with a raw-gadget Audio Kontrol 1 and a temporary hack that makes snd_usb_caiaq_control_init() fail.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: rtc: ac100: Fix clock provider use-after-free on probe failure ac100_rtc_register_clks() rCVE-2026-98826 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: rtc: ac100: Fix clock provider use-after-free on probe failure ac100_rtc_register_clks() registers the RTC-32k clock with clk_hw_register_fixed_rate() and the clock provider with of_clk_add_hw_provider(). Neither is device managed, and both are released only from ac100_rtc_remove(). The driver core does not call remove() when probe() fails: really_probe() reaches probe_failed below the device_remove() call and goes straight to releasing the device's managed resources. ac100_rtc_probe() ends with return devm_rtc_register_device(chip->rtc); so if that fails after the clocks have been registered, the provider is left on the global of_clk_providers list holding chip->clk_data, which was allocated with devm_kzalloc() and is freed while probe() unwinds. A later lookup on this device tree node then reads freed memory in of_clk_hw_onecell_get(). Consumers that do exactly that exist in tree: the wifi power sequence nodes on sun8i-a83t-bananapi-m3 and sun8i-a83t-cubietruck-plus take <&ac100_rtc 1>, and the sun9i-a80 boards route osc32k through <&ac100_rtc 0>. The window is narrow, as devm_rtc_register_device() can only

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: don't drain cmd_sync backlog on unregister hci_unregister_dev() disabCVE-2026-98809 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: don't drain cmd_sync backlog on unregister hci_unregister_dev() disables cmd_work and cmd_timer, then calls hci_cmd_sync_clear(), whose cancel_work_sync() waits for hci_cmd_sync_work() to return. That worker dequeues and runs every entry on cmd_sync_work_list. With cmd_work disabled nothing reaches the controller, so each queued HCI command waits the full HCI_CMD_TIMEOUT (2s). The backlog has no bound. Userspace can keep queuing MGMT commands such as MGMT_OP_GET_CLOCK_INFO against a controller that doesn't answer. Closing /dev/vhci then blocks in vhci_release() for backlog * 2s: INFO: task syz-executor:5749 blocked for more than 143 seconds. cancel_work_sync hci_cmd_sync_clear hci_unregister_dev vhci_release In a local reproduction the backlog held more than 5000 entries, which comes to hours of hang. Stop the worker from taking new entries once HCI_UNREGISTER is set, and wake any request still waiting with -ENODEV before cancelling the work. The entries left over are destroyed with -ECANCELED by the existing sweep in hci_cmd_sync_clear(). They stay on the list until the wor

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix ACP MFD device leak on init failure acp_hw_init() registers ACP child deviCVE-2026-98779 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix ACP MFD device leak on init failure acp_hw_init() registers ACP child devices with mfd_add_devices() before attaching them to the ACP power domain and initializing the hardware. If attaching a child to the power domain fails, or if the ACP reset or clock enable operation times out, the failure path frees only the source cell, resource, and platform-data allocations. The child platform devices already registered by mfd_add_devices() remain registered and are never released. Remove the children from the power domain and unregister the MFD devices on failures that occur after mfd_add_devices() succeeds. Keep mfd_add_devices() failures on the existing cleanup path since the MFD core already rolls back partially registered children itself. The issue was identified by a static analysis tool I developed and confirmed by manual review. (cherry picked from commit 63da68d6a2279ec945581c990c5a59a5ae8b5560)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: tty: fix saved termios reset race Resetting saved termios state on device registration is CVE-2026-98750 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tty: fix saved termios reset race Resetting saved termios state on device registration is needed where a minor number can be reused for an entirely different device and where the old settings may prevent the port from even being opened (e.g. when CLOCAL is not set). Not all TTY drivers guarantee that the minor number is no longer in use when registering devices however, something which can lead to a use-after-free when closing a TTY (and saving its termios) races with re-registration. Add a new TTY_DRIVER_RESET_SAVED_TERMIOS flag to request that any saved termios state is reset on registration and only set it for drivers that make sure that the minor number is no longer in use.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: serial: core: fix NULL pointer dereference in serial_core_unregister_port() port->port_devCVE-2026-98747 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: serial: core: fix NULL pointer dereference in serial_core_unregister_port() port->port_dev is NULL when no port device is installed: it is cleared on teardown, and never set if registration failed before serial_core_port_device_add(). serial_core_unregister_port() passes it straight to serial_core_get_ctrl_dev(), which dereferences it: KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] RIP: serial_core_unregister_port Call Trace: serial8250_unregister_port serial8250_remove unbind_store Return early when there is no port device, and read port->port_dev under port_mutex. Also clear port->port_dev on the serial_core_register_port() error path, where the port device has already been removed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix dynamic id driver deregistration race Only free the dynamic ids after havCVE-2026-98697 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix dynamic id driver deregistration race Only free the dynamic ids after having deregistered the driver and removed the "new_id" attribute to avoid leaking any id added by a racing write to the attribute.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix driver deregistration order USB serial driver modules register one driverCVE-2026-98696 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix driver deregistration order USB serial driver modules register one driver for the USB bus and one or more drivers for the ports on the USB serial bus. When unloading a driver module, the USB driver must be deregistered before the USB serial bus drivers so that I/O is stopped before unbinding the ports to avoid use-after-free in completion handlers accessing port data. Note that the "new_id" attributes must first be removed to prevent new ids from being added and triggering a probe of the USB driver after it has been deregistered.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: fix NULL pointer dereference in clkout registration ade9000_setup_clkouCVE-2026-98676 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: fix NULL pointer dereference in clkout registration ade9000_setup_clkout() passes NULL as the register address when registering a divider clock. During clock registration, the common clock framework calls clk_divider_recalc_rate(), which dereferences the address through readl(). As a result, probing an ADE9000 configured as a clock provider with an external input clock crashes. CLKOUT passes CLKIN through without changing its rate. Register it as a 1:1 fixed-factor clock, which does not require register access. This change does not affect the configuration using the internal clock, for which the driver does not register a clock provider.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: iio: adc: adi-axi-adc: Initialize state mutex The AXI ADC register access paths serialize CVE-2026-98674 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: iio: adc: adi-axi-adc: Initialize state mutex The AXI ADC register access paths serialize transactions with st->lock, but probe does not initialize it. Initialize the mutex before registering the backend.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: iio: adc: sun4i-gpadc-iio: clean up on thermal zone registration failure If devm_thermal_oCVE-2026-98671 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: iio: adc: sun4i-gpadc-iio: clean up on thermal zone registration failure If devm_thermal_of_zone_register() fails, probe returns without unregistering the IIO map array or disabling runtime PM. Jump to err_map to release them.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure pm_runtimeCVE-2026-98657 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure pm_runtime_set_active() failing in probe() jumps to error_unreg_buffer, which only calls iio_triggered_buffer_cleanup() -- it does not undo the iio_device_register() that already succeeded a few lines above. probe() then returns the error, the devm-managed indio_dev is freed, but the iio core still has it registered: the sysfs/chardev nodes stay live and point at freed memory. Add an error_unreg_dev label that unregisters the iio device before falling through to the existing buffer cleanup, mirroring the teardown order already used in lidar_remove().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: unregister net_devices in case of probe failure If register_neCVE-2026-98620 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: unregister net_devices in case of probe failure If register_netdev() fails for one of the MTK_MAX_DEVS devices in mtk_probe(), the error path jumps to err_deinit_ppe, skipping mtk_unreg_dev(). The previously registered net_devices are then freed by mtk_free_dev() while still in NETREG_REGISTERED state, hitting the BUG_ON(dev->reg_state != NETREG_UNREGISTERED). Route the register_netdev() failure to err_unreg_netdev so the net_devices registered so far are properly unregistered before being freed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: tg3: clean up PHYLIB resources on probe failure tg3_get_invariants() can register an MDIO CVE-2026-98594 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tg3: clean up PHYLIB resources on probe failure tg3_get_invariants() can register an MDIO bus and connect a PHY for USE_PHYLIB devices. If tg3_init_one() later fails, its common error path releases the mappings and netdev without undoing those PHYLIB resources. Disconnect the PHY and unregister the MDIO bus before the remaining teardown. Guard PHY cleanup with USE_PHYLIB to match tg3_phy_init(), and call tg3_mdio_fini() unconditionally to match tg3_mdio_init(). The existing IS_CONNECTED and MDIOBUS_INITED flags make both helpers safe when initialization only completed partially. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix NULL pointer dereference in debug_info_copy() When debug_register_static()CVE-2026-98593 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix NULL pointer dereference in debug_info_copy() When debug_register_static() fails, it clears areas, active_pages and active_entries but leaves the area bounds unchanged. Copying such an area, either by opening its view file or via debug_dump(), makes debug_info_copy() dereference the NULL pointers. Skip the copy loop when the source has no areas.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: pin VRAM for the whole registered range Commit c32287471077 ("gpu/drm/noCVE-2026-98518 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: pin VRAM for the whole registered range Commit c32287471077 ("gpu/drm/nouveau: enable THP support for GPU memory migration") grew the device-private region that nouveau_dmem_chunk_alloc() registers from DMEM_CHUNK_SIZE to DMEM_CHUNK_SIZE * NR_CHUNKS, but left the VRAM buffer object backing that region at DMEM_CHUNK_SIZE. nouveau_dmem_page_addr() returns chunk->bo->offset plus the page's offset within the registered region, so every page past the first chunk resolves to VRAM outside the buffer object. Size the buffer object to the region it backs.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: HID: alps: unregister DualPoint Stick input device on remove alps_input_configured() allocCVE-2026-98502 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: HID: alps: unregister DualPoint Stick input device on remove alps_input_configured() allocates a second input device ("DualPoint Stick") with input_allocate_device() and registers it, but the alps_driver struct has no .remove handler and input2 is not tracked in hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect) only iterates hdev->inputs, so input2 is never unregistered and leaks on every device removal. Add a .remove handler that stops the device first (preventing URB callbacks from touching input2 during teardown) and then unregisters input2.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: HID: alps: fix use-after-free on input2 registration failure alps_input_configured() storeCVE-2026-98501 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: HID: alps: fix use-after-free on input2 registration failure alps_input_configured() stores data->input2 before calling input_register_device(). If registration fails, input_free_device() frees the input device but data->input2 still points to the freed memory. alps_input_configured() calls hid_hw_open() before allocating input2, so URBs are already active and raw_event can fire during the failure window. A U1_SP_ABSOLUTE_REPORT_ID report arriving then causes u1_raw_event() to dereference the freed data->input2 -> use-after-free. Fix by only storing input2 into drvdata after successful registration and adding a NULL guard in the raw_event path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 18, 2026Vanus 0.8.0 through 0.9.0 contains a missing authorization vulnerability in the gateway that allows any authenticated user to call Subscribe, Ack, and unregisteCVE-2026-112000 · Other software · vanus-labs · reported by VulnCheckHigh 7.2

  Vanus 0.8.0 through 0.9.0 contains a missing authorization vulnerability in the gateway that allows any authenticated user to call Subscribe, Ack, and unregistered methods without permission checks. Attackers can supply another tenant's subscription ID to Subscribe to hijack it, read and acknowledge its events, starve the legitimate consumer, and enumerate cluster users via ListUser.

  Product

  vanus

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 17, 2026phpMyFAQ 4.0.0 before 4.1.9 contains an authentication bypass vulnerability where WebAuthn registration endpoints attach credentials to any account without authCVE-2026-111911 · Other software · thorsten · reported by VulnCheckCritical 9.3

  phpMyFAQ 4.0.0 before 4.1.9 contains an authentication bypass vulnerability where WebAuthn registration endpoints attach credentials to any account without authentication or challenge validation. Attackers can stage a victim username, submit a forged fmt=none attestation to register a passkey, then log in bypassing passwords and TOTP for account takeover.

  Product

  phpMyFAQ

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 17, 2026phpMyFAQ before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains an account enumeration vulnerability that allows unauthenticated attackers to confirm registereCVE-2026-111887 · Other software · thorsten · reported by VulnCheckMedium 6.9

  phpMyFAQ before 4.1.9 and 4.2.0-alpha before 4.2.0-beta contains an account enumeration vulnerability that allows unauthenticated attackers to confirm registered display names and emails via a distinct HTTP 409 response. Attackers can submit guest comments to the comment create endpoint with candidate user and mail values to link names to emails for targeted phishing.

  Product

  phpMyFAQ

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 17, 2026WP User Manager: Does not roll back the WordPress account it creates during payment-gated registrationCVE-2026-110527 · WordPress plugins & themes · reported by WPScanMedium 5.3

  The WP User Manager WordPress plugin before 2.9.20 does not roll back the WordPress account it creates during payment-gated registration when the subsequent payment step fails, allowing unauthenticated users to create functional accounts without completing payment.

  Product

  WP User Manager

  Fixed in

  2.9.20

  What to do

  Update WP User Manager to 2.9.20 or newer.

  Full record and what to do →NVD recordwpscan.com

• Oct 17, 2026The User Registration & Membership – Free & Paid Memberships, Subscriptions, Content Restriction, User Profile, Custom User Registration & Login Builder plugin CVE-2026-96660 · WordPress plugins & themes · reported by WordfenceHigh 7.2

  The User Registration & Membership – Free & Paid Memberships, Subscriptions, Content Restriction, User Profile, Custom User Registration & Login Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Checkbox Field Value in all versions up to, and including, 5.2.8 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The nopriv AJAX action user_registration_user_form_submit reaches ur_process_registration() without nonce validation, meaning any unauthenticated request can reach the vulnerable code path.

  Affected

  up to 5.2.8

  What to do

  Affects up to 5.2.8. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org

• Oct 17, 2026The User Registration & Membership – Free & Paid Memberships, Subscriptions, Content Restriction, User Profile, Custom User Registration & Login Builder plugin CVE-2026-92978 · WordPress plugins & themes · reported by WordfenceMedium 4.3

  The User Registration & Membership – Free & Paid Memberships, Subscriptions, Content Restriction, User Profile, Custom User Registration & Login Builder plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 5.2.8 This is due to missing or incorrect nonce validation on the trigger_bulk_action function. This makes it possible for unauthenticated attackers to force administrators to approve pending user registrations or deny arbitrary user accounts, locking targeted users out of the site via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. An attacker can bypass the earlier nonce check in trigger_query_actions() by supplying an empty new_role parameter, which causes that handler to return early and cede control to the unprotected trigger_bulk_action() handler; the exit() call at the end of that handler additionally prevents WordPress core's own bulk-users nonce validation from executing.

  Affected

  up to 5.2.8

  What to do

  Affects up to 5.2.8. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org

• Oct 17, 2026User Registration & Membership: Arbitrary Shortcode ExecutionCVE-2026-92798 · WordPress plugins & themes · reported by WordfenceHigh 8.1

  The User Registration & Membership plugin for WordPress is vulnerable to Arbitrary Shortcode Execution in versions up to, and including, 5.2.8 This is due to insufficient input sanitization in the 'referrer_url' branch of UR_Smart_Tags::process(), where the attacker-controlled HTTP_REFERER header is only passed through sanitize_text_field() — which does not strip WordPress shortcode delimiters — before being substituted into a Content Restriction message that is subsequently executed via apply_shortcodes()/do_shortcode(). This makes it possible for unauthenticated attackers to execute arbitrary registered shortcodes on any restricted page whose message uses the supported {{referrer_url}} smart tag.

  Product

  User Registration & Membership

  Affected

  up to 5.2.8

  What to do

  Affects up to 5.2.8. Update User Registration & Membership to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org

• Oct 16, 2026LingGuo-Drama through commit 8a6924a contains a missing authorization vulnerability that allows any registered user to manage all accounts through the /admin/v1CVE-2026-111723 · Other software · LingGuoAI · reported by VulnCheckHigh 8.7

  LingGuo-Drama through commit 8a6924a contains a missing authorization vulnerability that allows any registered user to manage all accounts through the /admin/v1/admins API protected only by AuthAdminJWT. Attackers can self-register, read every account's bcrypt hash, reset the bootstrap administrator's password via PUT, raise their authority_id, and delete accounts.

  Product

  LingGuo-Drama

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 16, 2026LingGuo-Drama through commit 8a6924a contains an insecure direct object reference vulnerability that allows registered users to access other users' projects becCVE-2026-111722 · Other software · LingGuoAI · reported by VulnCheckHigh 8.6

  LingGuo-Drama through commit 8a6924a contains an insecure direct object reference vulnerability that allows registered users to access other users' projects because projects.Get lacks an owner check. Self-registered attackers can iterate numeric IDs via GET, PUT and DELETE /admin/v1/projects/:id to read, overwrite, reassign or delete any user's short-drama projects.

  Product

  LingGuo-Drama

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 16, 2026WhaTicket Community through commit cf04795 contains an authentication bypass vulnerability that allows unauthenticated attackers to self-register as administratCVE-2026-111708 · Other software · canove · reported by VulnCheckCritical 9.3

  WhaTicket Community through commit cf04795 contains an authentication bypass vulnerability that allows unauthenticated attackers to self-register as administrators via POST /auth/signup. Attackers can omit the profile field or set it to admin, gaining user management, settings, and access to all tickets, contacts, messages, and WhatsApp connections.

  Product

  whaticket-community

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 16, 2026Magistrala through 1.0.0 contains an authorization bypass vulnerability that allows authenticated workspace members to view, issue, and revoke other tenants' deCVE-2026-111684 · Other software · absmach · reported by VulnCheckHigh 7.2

  Magistrala through 1.0.0 contains an authorization bypass vulnerability that allows authenticated workspace members to view, issue, and revoke other tenants' device certificates by supplying foreign serials or entity ids. Attackers can call RevokeBySerial, RevokeAll, ViewCert, ListCerts, or IssueCert under their own workspace path to disconnect other tenants' devices, disclose certificates, and mint CA-signed certificates for their device ids.

  Product

  magistrala

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 16, 2026In the default configuration, the archive accepts DICOM associations from an unregistered calling AE.CVE-2026-105279 · Other software · J4Care · reported by ics-cert@hq.dhs.govCritical 9.3

  In the default configuration, the archive accepts DICOM associations from an unregistered calling AE. A remote peer can use C-FIND and C-GET to enumerate and retrieve patient information and medical images. It can also use C-STORE to file fabricated study content under an existing patient identity.

  Product

  dcm4chee-arc-light

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comcisa.gov

• Oct 16, 2026User Registration PRO – Custom Registration Form, Login Form, and User Profile: Stored Cross-Site ScriptingCVE-2026-87111 · WordPress plugins & themes · reported by WordfenceHigh 7.2

  The User Registration PRO – Custom Registration Form, Login Form, and User Profile WordPress Plugin plugin for WordPress is vulnerable to Stored Cross-Site Scripting via HTTP Referer Header in all versions up to, and including, 6.2.9 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This vulnerability is present only in the premium build of the plugin and is not present in the free WordPress.org distribution. The nonce required to call the vulnerable AJAX endpoint is localized into the page source of every front-end page for anonymous visitors, making it fully obtainable by unauthenticated attackers.

  Product

  User Registration PRO – Custom Registration Form, Login Form, and User Profile

  Affected

  up to 6.2.9

  What to do

  Affects up to 6.2.9. Update User Registration PRO – Custom Registration Form, Login Form, and User Profile to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordwpuserregistration.comwordfence.com

• Oct 16, 2026The The User Registration & Membership – Free & Paid Memberships, Subscriptions, Content Restriction, User Profile, Custom User Registration & Login Builder pluCVE-2026-15222 · WordPress plugins & themes · reported by WordfenceMedium 5.4

  The The User Registration & Membership – Free & Paid Memberships, Subscriptions, Content Restriction, User Profile, Custom User Registration & Login Builder plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 5.2.8. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for authenticated attackers, with subscriber-level access and above, to execute arbitrary shortcodes.

  Affected

  up to 5.2.8

  What to do

  Affects up to 5.2.8. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordplugins.trac.wordpress.orgwordfence.com

• Oct 16, 2026OTP Login & Register Woocommerce: Does not adequately limit one-time-password verification attemptsCVE-2026-110135 · WordPress plugins & themes · reported by WPScanHigh 7.4

  The OTP Login & Register Woocommerce WordPress plugin before 2.7.3 does not adequately limit one-time-password verification attempts, because the attempt limit is tracked against a value the client itself supplies and can change freely, allowing an unauthenticated attacker to bypass the limit and brute-force the short numeric login code to take over an account without its password.

  Product

  OTP Login & Register Woocommerce

  Fixed in

  2.7.3

  What to do

  Update OTP Login & Register Woocommerce to 2.7.3 or newer.

  Full record and what to do →NVD recordwpscan.com

• Oct 16, 2026User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor: Privilege EscalationCVE-2026-109447 · WordPress plugins & themes · reported by WordfenceHigh 8.1

  The User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 4.0.3 via the `role` parameter handled by the `wppb_add_meta_to_user_on_activation()` function. The vulnerability exists because the activation handler passes the attacker-supplied role value directly to `WP_User::set_role()` with no allow-list validation, and the 4.0.3 reserved-name check exempts pre-existing form fields from the block, allowing a legacy field with meta-name `role` to persist and bridge attacker-controlled request input into the serialized signup record stored in `wp_signups`. This makes it possible for unauthenticated attackers to gain a fully activated WordPress administrator account by submitting `role=administrator` through the public `[wppb-register]` shortcode form and subsequently clicking the confirmation activation link. Exploitation requires the site to have a legacy form field with meta-name `role` carried over from before the 4.0.3 upgrade, email confirmation enabled, and open user registration — all stable site-state conditions once established.

  Product

  User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor

  Affected

  up to 4.0.3

  What to do

  Affects up to 4.0.3. Update User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org

• Oct 16, 2026User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor: Stored Cross-Site ScriptingCVE-2026-107748 · WordPress plugins & themes · reported by WordfenceMedium 6.4

  The User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'display_name' parameter in all versions up to, and including, 4.0.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The payload persists in wp_comments.comment_author independently of the user account, so removing or changing the attacker's display name after the comment is posted does not neutralize the stored script.

  Product

  User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor

  Affected

  up to 4.0.3

  What to do

  Affects up to 4.0.3. Update User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org

• Oct 16, 2026User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor: Stored Cross-Site ScriptingCVE-2026-100186 · WordPress plugins & themes · reported by WordfenceHigh 7.2

  The User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via First Name Field in all versions up to, and including, 4.0.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This vulnerability is only exploitable when the Email Confirmation feature is enabled in Profile Builder.

  Product

  User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor

  Affected

  up to 4.0.3

  What to do

  Affects up to 4.0.3. Update User Profile Builder – Beautiful User Registration Forms, User Profiles & User Role Editor to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org

• Oct 15, 2026EnergizeLab station-middleware (NestJS) Docker images 1.6.5 through 1.8.2 allow any registered, low-privilege account to read arbitrary files from the server byCVE-2026-105037 · Other software · EnergizeLab · reported by cve@takeonme.orgCritical 9.9

  EnergizeLab station-middleware (NestJS) Docker images 1.6.5 through 1.8.2 allow any registered, low-privilege account to read arbitrary files from the server by supplying an attacker-controlled file path. This exposes middleware files and server secrets.

  Product

  station-middleware

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comtakeonme.org

• Oct 15, 2026Python Social Auth is a social authentication/registration mechanism.CVE-2026-62322 · Other software · python-social-auth · reported by GitHubMedium 6.5

  Python Social Auth is a social authentication/registration mechanism. Prior to 5.0.2, the LINE backend exchanges an authorization code without validating the returned OAuth state. An attacker can begin authorization for an attacker-controlled LINE account and induce a victim to visit the resulting callback URL, causing the application to log the victim into the attacker's account. When account linking is enabled, the same missing validation can link the attacker's LINE identity to the victim's existing account and create a persistent unauthorized login path. Only applications with the LINE backend enabled are affected. This issue is fixed in version 5.0.2.

  Product

  social-core

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 15, 2026User Registration: Missing AuthorizationCVE-2026-109692 · WordPress plugins & themes · reported by PatchstackHigh 7.1

  Missing Authorization vulnerability in ThemeGrill User Registration user-registration allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects User Registration: from n/a through 5.2.8.

  Product

  User Registration

  Affected

  up to 5.2.8

  What to do

  Affects up to 5.2.8. Update User Registration to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordpatchstack.com

• Oct 15, 2026User Registration: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')CVE-2026-105882 · WordPress plugins & themes · reported by PatchstackMedium 6.5

  Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in ThemeGrill User Registration user-registration allows Stored XSS.This issue affects User Registration: from n/a through 5.2.8.

  Product

  User Registration

  Affected

  up to 5.2.8

  What to do

  Affects up to 5.2.8. Update User Registration to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordpatchstack.com

• Oct 15, 2026User Rights Access Manager: Does not restrict access to one of its AJAX account-registration handlers and assigns newly registered accounts a role that was createdCVE-2026-109145 · WordPress plugins & themes · reported by WPScanCritical 9.8

  The User Rights Access Manager WordPress plugin through 1.1.3 does not restrict access to one of its AJAX account-registration handlers and assigns newly registered accounts a role that was created as a copy of the administrator role, allowing unauthenticated attackers to register an administrator-equivalent account and take over the site.

  Product

  User Rights Access Manager

  Affected

  up to 1.1.3

  What to do

  Affects up to 1.1.3. Update User Rights Access Manager to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordwpscan.com

• Oct 14, 2026FreeRDP versions 3.13.0 before 3.32.0 contain a resource retention flaw in drive_process_irp_create, which registers an opened local file in the drive dictionarCVE-2026-110831 · Other software · FreeRDP · reported by VulnCheckMedium 5.3

  FreeRDP versions 3.13.0 before 3.32.0 contain a resource retention flaw in drive_process_irp_create, which registers an opened local file in the drive dictionary before applying the allocation size and does not remove it when that operation fails. A malicious RDP server connected to a client with drive redirection enabled can send IRP_MJ_CREATE with AllocationSize set to UINT64_MAX, forcing the seek to fail and leaking the file object and operating-system handle until drive teardown.

  Product

  FreeRDP

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 14, 2026Gitea allows a token with write:user scope to register an attacker-controlled SSH public key on the token owner's account.CVE-2026-73804 · Other software · Gitea · reported by 88ee5874-cf24-4952-aea0-31affedb7ff2High 8.1

  Gitea allows a token with write:user scope to register an attacker-controlled SSH public key on the token owner's account. API requests signed with the corresponding private key authenticate as that account through HTTP Signature without API token scope information, causing route-level token scope checks to be skipped. This converts a user-scoped token into an unscoped API authentication method while retaining the account's normal role and repository permissions.

  Product

  Gitea

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordblog.gitea.comgithub.com

• Oct 14, 2026Gitea's package registry grants authenticated users read access to packages owned by Limited-visibility users without excluding restricted accounts.CVE-2026-66849 · Other software · Gitea · reported by 88ee5874-cf24-4952-aea0-31affedb7ff2Medium 4.3

  Gitea's package registry grants authenticated users read access to packages owned by Limited-visibility users without excluding restricted accounts. A restricted user can enumerate and download those packages despite the visibility policy that should prevent this access. The issue affects user-owned package registries and exposes package contents across the intended authorization boundary.

  Product

  Gitea

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordblog.gitea.comgithub.com

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.