Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
414 results · page 2 of 9
Sep 17, 2026A vulnerability has been identified in the Acer System Monitoring component included with NitroSense and PredatorSense due to insufficient access controls in a CVE-2026-50610 · Other software · Acer · reported by 8fc372e3-d9c5-46e4-9410-38469745c639High 7.4
A vulnerability has been identified in the Acer System Monitoring component included with NitroSense and PredatorSense due to insufficient access controls in a privileged service. An authenticated local user may be able to access the service and perform unauthorized registry modifications, potentially resulting in local privilege escalation.
- Product
- System Monitoring
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 17, 2026A vulnerability has been identified in the Acer System Monitoring component included with NitroSense and PredatorSense.CVE-2026-50609 · Other software · Acer · reported by 8fc372e3-d9c5-46e4-9410-38469745c639High 7.4
A vulnerability has been identified in the Acer System Monitoring component included with NitroSense and PredatorSense. Insufficient access controls within a privileged Named Pipe service may allow an authenticated local user to perform unauthorized registry operations. In certain situations, this could lead to privilege escalation or compromise of the affected system.
- Product
- System Monitoring
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 17, 2026A vulnerability has been identified in the Acer System Monitoring component included with NitroSense and PredatorSense.CVE-2026-50608 · Other software · Acer · reported by 8fc372e3-d9c5-46e4-9410-38469745c639Low 1.2
A vulnerability has been identified in the Acer System Monitoring component included with NitroSense and PredatorSense. The WebSocket handshake process does not properly require authentication before allowing connections to the service. Under certain circumstances, unauthorized access to service functionality may be possible.
- Product
- System Monitoring
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 17, 2026A vulnerability has been identified in the Acer System Monitoring component included with NitroSense and PredatorSense.CVE-2026-50607 · Other software · Acer · reported by 8fc372e3-d9c5-46e4-9410-38469745c639Low 2.7
A vulnerability has been identified in the Acer System Monitoring component included with NitroSense and PredatorSense. A WebSocket service was configured to listen on all network interfaces, which may expose the service to unintended network access.
- Product
- System Monitoring
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 17, 2026A vulnerability has been identified in the Acer System Monitoring component included with NitroSense and PredatorSense.CVE-2026-50606 · Other software · Acer · reported by 8fc372e3-d9c5-46e4-9410-38469745c639Low 1.2
A vulnerability has been identified in the Acer System Monitoring component included with NitroSense and PredatorSense. The vulnerability is caused by the use of a hard-coded AES encryption key within the software. Under certain circumstances, a local attacker may be able to use the embedded key to access protected information or perform unauthorized actions.
- Product
- System Monitoring
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 17, 2026A vulnerability has been identified in the Acer Agent Service component included with NitroSense and PredatorSense.CVE-2026-50605 · Other software · Acer · reported by 8fc372e3-d9c5-46e4-9410-38469745c639High 7.4
A vulnerability has been identified in the Acer Agent Service component included with NitroSense and PredatorSense. Insufficient access controls within a privileged service may allow an authenticated local user to perform unauthorized registry operations. In certain situations, this could lead to privilege escalation or compromise of the affected system.
- Product
- Agent Serivce
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 17, 2026A vulnerability has been identified in the Acer Agent Service component included with NitroSense and PredatorSense.CVE-2026-50604 · Other software · Acer · reported by 8fc372e3-d9c5-46e4-9410-38469745c639Medium 4.9
A vulnerability has been identified in the Acer Agent Service component included with NitroSense and PredatorSense. The socket handshake process does not properly require authentication before granting access to the service. Under certain circumstances, an unauthorized connection may be established, potentially allowing access to functionality that should be restricted.
- Product
- Agent Service
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 17, 2026A vulnerability has been identified in the Acer Agent Service component included with NitroSense and PredatorSense.CVE-2026-50603 · Other software · Acer · reported by 8fc372e3-d9c5-46e4-9410-38469745c639Medium 4.9
A vulnerability has been identified in the Acer Agent Service component included with NitroSense and PredatorSense. The vulnerability is caused by the use of a hard-coded AES encryption key within the software. Under certain circumstances, a local attacker may be able to use the embedded key to access protected information or perform unauthorized actions.
- Product
- Agent Service
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Cap io_uring sense copy to max_response_len Completion copied scmd->sense_len tCVE-2026-90010 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: scsi: bsg: Cap io_uring sense copy to max_response_len Completion copied scmd->sense_len to the user response buffer without honoring max_response_len. After a valid sense, the midlayer sets sense_len to the real length (up to SCSI_SENSE_BUFFERSIZE), so a smaller user buffer was overrun.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read In qla2x00_status_entry(), CVE-2026-89846 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read In qla2x00_status_entry(), the FWI2 status path advances sense_data and shrinks par_sense_len by rsp_info_len: if (IS_FWI2_CAPABLE(ha)) { sense_data += rsp_info_len; par_sense_len -= rsp_info_len; } rsp_info_len is a 32-bit value taken directly from the target's FCP response (sf.rsp_data_len), while par_sense_len is the IOCB data area size (28 bytes for 24xx, 60 bytes for 29xx). A hostile or buggy target reporting an rsp_info_len larger than par_sense_len makes the unsigned subtraction underflow to a huge value and advances sense_data out of bounds. The underflowed par_sense_len then defeats the cap in qla2x00_handle_sense(): if (sense_len > par_sense_len) sense_len = par_sense_len; memcpy(cp->sense_buffer, sense_data, sense_len); so the memcpy reads up to SCSI_SENSE_BUFFERSIZE bytes from the out-of-bounds sense_data pointer, leaking adjacent response-ring/heap memory into the command's sense buffer. Clamp rsp_info_len to par_sense_len before the subtraction so par_sense_len can never underflow and sense_data stays within the IOCB data
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026Ad Inserter – Ad Manager & AdSense Ads: Authorization bypassCVE-2026-11984 · WordPress plugins & themes · reported by WordfenceMedium 5.3
The Ad Inserter – Ad Manager & AdSense Ads plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.8.16 due to a missing capability check on the `ai-debug-code` URL-parameter. This makes it possible for unauthenticated attackers to view administrator-configured header and footer code blocks that have been disabled from public display.
- Product
- Ad Inserter – Ad Manager & AdSense Ads
- Affected
- up to 2.8.16
- What to do
- Affects up to 2.8.16. Update Ad Inserter – Ad Manager & AdSense Ads to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordplugins.trac.wordpress.orgwordfence.com
Sep 14, 2026Tract is a tiny, no-nonsense, self-contained TensorFlow and ONNX inference toolkit.CVE-2026-55093 · Other software · sonos · reported by GitHubMedium 6.1
Tract is a tiny, no-nonsense, self-contained TensorFlow and ONNX inference toolkit. Prior to 0.21.16, 0.22.2, and 0.23.1, tract-nnef uses unchecked usize multiplication in nnef/src/tensors.rs read_tensor for attacker-controlled tensor dimensions, the allocation size, and the reported tensor length. Loading a crafted NNEF archive through model_for_path or model_for_read reaches the default DatLoader and can make the wrapped size check accept a small allocation while data/src/tensor.rs as_slice_unchecked creates a much larger logical slice. Model construction through as_uniform can then read beyond the heap allocation and disclose adjacent data, and later access can terminate the process with a segmentation fault. The affected dense numeric tensor path does not include the independently guarded bool, String, or block-quant paths, and no out-of-bounds write or code execution was demonstrated. This issue is fixed in versions 0.21.16, 0.22.2, and 0.23.1.
- Product
- tract
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 14, 2026Tract is a tiny, no-nonsense, self-contained TensorFlow and ONNX inference toolkit.CVE-2026-55832 · Other software · sonos · reported by GitHubMedium 6.1
Tract is a tiny, no-nonsense, self-contained TensorFlow and ONNX inference toolkit. Prior to 0.21.17, 0.22.3, and 0.23.2, the tract-onnx crate passes the attacker-controlled external_data location from an ONNX model through onnx/src/tensor.rs get_external_resources and joins the value to the model directory without rejecting absolute paths or parent directory components. Loading an untrusted model through model_for_path can therefore make onnx/src/data_resolver.rs MmapDataResolver open an arbitrary local file and place the file contents into model tensors or inference output. Attacker-controlled offset and length fields can also select an out-of-range mapping slice and cause a denial of service, but the flaw does not write files or execute code. This issue is fixed in versions 0.21.17, 0.22.3, and 0.23.2.
- Product
- tract
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 13, 2026Quads Ads Manager for Google AdSense: Does not verify payment completion with the configured payment gateway before marking an ad-selling orderCVE-2026-89050 · WordPress plugins & themes · reported by WPScanMedium 4.3
The Quads Ads Manager for Google AdSense WordPress plugin before 3.0.5 does not verify payment completion with the configured payment gateway before marking an ad-selling order as paid, allowing users who can place an order to obtain a paid ad placement without payment.
- Product
- Quads Ads Manager for Google AdSense
- Fixed in
- 3.0.5
- What to do
- Update Quads Ads Manager for Google AdSense to 3.0.5 or newer.
Sep 8, 2026OPNsense is a FreeBSD based firewall and routing platform.CVE-2026-53581 · Other software · opnsense · reported by GitHubCritical 9
OPNsense is a FreeBSD based firewall and routing platform. Prior to version 26.1.9 of opnsense/core and version 26.4_20 of BE/opnsense/core, a path traversal vulnerability in the NTP configuration module allows an attacker to overwrite arbitrary files on the system as the root user. By manipulating the GPS or PPS serial port parameter, an attacker with access to the NTP configuration can escape the intended directory and force the system to write user-controlled data to any file on the filesystem. Version 26.1.9 of opnsense/core and version 26.4_20 of BE/opnsense/core patch the issue.
- Product
- core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 4, 2026Cross Site Scripting vulnerability in Netgate pfSense Plus software versions <= 26.03 pfSense CE software versions <= 2.8.1 allows a remote attacker to execute CVE-2026-78849 · Other software · reported by MITREMedium 5.4
Cross Site Scripting vulnerability in Netgate pfSense Plus software versions <= 26.03 pfSense CE software versions <= 2.8.1 allows a remote attacker to execute arbitrary code via the captive_portal_status.widget.php file
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddocs.netgate.comredmine.pfsense.org
Sep 4, 2026Cross-Site Scripting (XSS) vulnerability in the RSS Widget of Netgate pfSense Plus (versions 26.03, 25.11.1) and pfSense CE (version 2.8.1) allows remote authenCVE-2026-38961 · Other software · reported by MITREMedium 5.4
Cross-Site Scripting (XSS) vulnerability in the RSS Widget of Netgate pfSense Plus (versions 26.03, 25.11.1) and pfSense CE (version 2.8.1) allows remote authenticated attackers to inject arbitrary JavaScript via malicious content in an RSS feed title. The injected script executes in the browser of any authenticated user who views the dashboard, due to insufficient sanitization of feed title data before rendering in the widget.
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddocs.netgate.comgithub.com
Sep 3, 2026pfSense Plus before 26.07 and CE before 2.9.0 allow authenticated users with the Firewall: Schedules: Edit privilege to inject arbitrary JavaScript via the descCVE-2026-56128 · Other software · Netgate · reported by VulnCheckMedium 5.1
pfSense Plus before 26.07 and CE before 2.9.0 allow authenticated users with the Firewall: Schedules: Edit privilege to inject arbitrary JavaScript via the descr parameter in /firewall_schedule_edit.php. The schedule description is stored without HTML sanitization and subsequently inserted into an HTML attribute value in /firewall_rules.php with only single-quote escaping applied, permitting double-quote breakout. The payload executes in the browser of any user with the Firewall: Rules privilege who views the rules list with the affected schedule attached.
- Product
- pfSense Plus
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddocs.netgate.comdocs.netgate.com
Sep 3, 2026pfSense Plus before 26.07 and CE before 2.9.0 allow authenticated users with the Firewall: Rules: Edit privilege to inject arbitrary JavaScript via the descr paCVE-2026-56127 · Other software · Netgate · reported by VulnCheckMedium 5.1
pfSense Plus before 26.07 and CE before 2.9.0 allow authenticated users with the Firewall: Rules: Edit privilege to inject arbitrary JavaScript via the descr parameter in /firewall_rules_edit.php. The firewall rule description is stored in the pfSense XML configuration with only backslash-escaping applied and no HTML sanitization, then rendered without encoding in the firewall log table in /status_logs_filter.php. The payload executes in the browser of any user with the Status: Logs: Firewall privilege who views the affected log entries.
- Product
- pfSense Plus
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddocs.netgate.comdocs.netgate.com
Sep 3, 2026pfSense Plus before 26.07 and CE before 2.9.0 allow authenticated users with the Status: Monitoring privilege to inject arbitrary JavaScript via graph configuraCVE-2026-56126 · Other software · Netgate · reported by VulnCheckMedium 5.1
pfSense Plus before 26.07 and CE before 2.9.0 allow authenticated users with the Status: Monitoring privilege to inject arbitrary JavaScript via graph configuration parameters in /status_monitoring.php. Multiple POST parameters including graph-left, graph-right, time-period, resolution, start-date, end-date, start-time, end-time, graph-type, invert, and refresh-interval are concatenated and written to the global pfSense XML configuration without sanitization, then echoed unsanitized into a JavaScript string context on page render. Because the setting is stored in the global configuration, the payload executes in the browser of every user who visits the Status: Monitoring page.
- Product
- pfSense Plus
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddocs.netgate.comdocs.netgate.com
Aug 19, 2026pfSense Plus before 26.07 and pfSense CE through 2.8.1 contain a stored cross-site scripting vulnerability in the Traffic Graphs top-talkers feature, where PTR CVE-2026-67189 · Other software · Netgate · reported by VulnCheckMedium 5.3
pfSense Plus before 26.07 and pfSense CE through 2.8.1 contain a stored cross-site scripting vulnerability in the Traffic Graphs top-talkers feature, where PTR records returned by reverse DNS lookups are incorporated without sanitization into AJAX responses and rendered as HTML through a DOM sink in the administrator interface. An attacker who controls a PTR record and generates sufficient traffic to appear as a top talker can execute arbitrary JavaScript in an administrator's browser, gaining access to the authenticated session context and same-origin access to the firewall management interface, enabling account creation and arbitrary OS command execution.
- Product
- pfSense Plus
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddocs.netgate.comdocs.netgate.com
Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer iscsi_scsi_cmd_rsp() copiesCVE-2026-74557 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the target-supplied data segment. The segment carries a 2-byte sense length followed by the sense bytes, so it must hold 2 + senselen bytes, but the bounds check only requires datalen >= senselen: senselen = get_unaligned_be16(data); if (datalen < senselen) goto invalid_datalen; memcpy(sc->sense_buffer, data + 2, min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE)); A target that returns a SCSI Response whose datalen equals senselen (with senselen <= SCSI_SENSE_BUFFERSIZE) makes the memcpy() from data + 2 read up to two bytes past the received data. Those bytes are stale conn->data contents and end up in the command's sense buffer, which is returned to userspace. Account for the 2-byte sense length prefix in the check.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 6, 2026Ad Inserter – Ad Manager & AdSense Ads: Authorization bypassCVE-2026-11983 · WordPress plugins & themes · reported by WordfenceMedium 5.3
The Ad Inserter – Ad Manager & AdSense Ads plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.8.16 due to a missing capability check in the `ai_ajax` function. This makes it possible for unauthenticated attackers to view the contents of ad blocks that an administrator has restricted to administrator-only visibility.
- Product
- Ad Inserter – Ad Manager & AdSense Ads
- Affected
- up to 2.8.16
- What to do
- Affects up to 2.8.16. Update Ad Inserter – Ad Manager & AdSense Ads to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org
Aug 3, 2026OPNsense before 26.1.9 contains a stored cross-site scripting vulnerability that allows authenticated attackers to inject arbitrary HTML or JavaScript by embeddCVE-2026-49132 · Other software · Deciso B.V. · reported by VulnCheckMedium 5.1
OPNsense before 26.1.9 contains a stored cross-site scripting vulnerability that allows authenticated attackers to inject arbitrary HTML or JavaScript by embedding payloads in the certificate description field via the trust certificate API. The unsanitized description value is persisted and later rendered in the Dashboard Certificates widget through Certificates.js, which interpolates the raw value into HTML attribute and text content sinks without encoding, causing injected scripts to execute in the browser of any authenticated user who views the Dashboard, enabling session hijacking or credential theft.
- Product
- OPNsense
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddocs.opnsense.orggithub.com
Aug 3, 2026OPNsense before 26.1.9 contains a stored cross-site scripting vulnerability that allows authenticated attackers with firewall rule management privileges to injeCVE-2026-49131 · Other software · Deciso B.V. · reported by VulnCheckMedium 5.1
OPNsense before 26.1.9 contains a stored cross-site scripting vulnerability that allows authenticated attackers with firewall rule management privileges to inject arbitrary HTML or JavaScript by embedding payloads in the firewall rule description field via the filter API endpoint. The unsanitized description value is persisted and later rendered through the default cell formatter in opnsense_bootgrid.js, which assigns raw cell content to innerHTML, causing injected scripts to execute in the browser of any authenticated user who views the Firewall Rules page, enabling session hijacking or credential theft.
- Product
- OPNsense
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddocs.opnsense.orggithub.com
Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: avoid kobject path lookup in DualSense match The DualSense jack-detectionCVE-2026-64478 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: avoid kobject path lookup in DualSense match The DualSense jack-detection input handler verifies that a matching input device belongs to the same physical controller by building kobject path strings for both the input device and the USB audio device, then comparing the path prefix. This was observed when a weak physical connection caused the controller to rapidly disconnect and reconnect. During that repeated hotplug, snd_dualsense_ih_match() can run while the controller's USB device is being disconnected. kobject_get_path() walks ancestor kobjects and dereferences their names; if the USB device kobject name is no longer valid, this can fault in strlen(): RIP: 0010:strlen+0x10/0x30 Call Trace: kobject_get_path+0x34/0x150 snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio] input_register_device+0x566/0x6a0 ps_probe+0xb89/0x1590 [hid_playstation] The same ownership check can be done without building kobject path strings. The input device is parented below the HID device, USB interface and USB device, so walking the input device parent chain and comparing against the mixer USB device
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Jul 3, 2026Ad Inserter – Ad Manager & AdSense Ads: Insecure Direct Object ReferenceCVE-2026-11900 · WordPress plugins & themes · reported by WordfenceMedium 4.3
The Ad Inserter – Ad Manager & AdSense Ads plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to and including 2.8.16 via the 'data' attribute of the [adinserter] shortcode. This is due to the replace_ai_tags() function processing a {reusable-block-N} tag pattern that calls get_post_field('post_content', N) without verifying the requesting user's capability with current_user_can('read_post'), without restricting the post type to 'wp_block', and without checking the post status. This makes it possible for authenticated attackers, with Contributor-level access and above, to read the full content of arbitrary posts including Private, Draft, Pending, Trashed, and password-protected posts owned by other users, by placing the shortcode in a post they own and previewing it.
- Product
- Ad Inserter – Ad Manager & AdSense Ads
- Affected
- up to 2.8.16
- What to do
- Affects up to 2.8.16. Update Ad Inserter – Ad Manager & AdSense Ads to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org
Jun 25, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: bound SRP_RSP sense copy by the received length srp_process_rsp() copies sense dCVE-2026-53186 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1
In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: bound SRP_RSP sense copy by the received length srp_process_rsp() copies sense data from rsp->data + resp_data_len, where resp_data_len is the full 32-bit value supplied by the SRP target and is never checked against the number of bytes actually received (wc->byte_len). The copy length is bounded to SCSI_SENSE_BUFFERSIZE, so at most 96 bytes are copied, but the source offset is not bounded. A malicious or compromised SRP target on the InfiniBand/RoCE fabric that the initiator has logged into can return an SRP_RSP with SRP_RSP_FLAG_SNSVALID set and a large resp_data_len. The receive buffer is allocated at the target-chosen max_ti_iu_len, so the source of the sense copy lands past the bytes actually received; with resp_data_len near 0xFFFFFFFF it is gigabytes past the buffer and the read faults. Copy the sense data only if it has not been truncated, that is, only if the response header, the response data, and the sense region fit within the bytes actually received; otherwise drop the sense and log. The in-tree iSER and NVMe-RDMA receive paths already bound their parse by wc->byte_len; this brings ib_srp
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Jun 15, 2026Unauthenticated Cross Site Scripting (XSS) in Eli's WordCents adSense Widget with Analytics <= 1.3.03.27 versions.CVE-2025-68872 · WordPress plugins & themes · reported by PatchstackHigh 7.1
Unauthenticated Cross Site Scripting (XSS) in Eli's WordCents adSense Widget with Analytics <= 1.3.03.27 versions.
- Affected
- up to 1.3.03.27
- What to do
- Affects up to 1.3.03.27. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Jun 12, 2026Typesense is a fast, typo-tolerant search engine.CVE-2026-47225 · Other software · typesense · reported by GitHubMedium 6
Typesense is a fast, typo-tolerant search engine. Prior to versions 29.1 and 30.2, there is a cache isolation issue affecting search requests that use both server-side search result caching and Scoped Search API Keys. Under specific request ordering, cached search results could be reused across requests with different Scoped Search API Key constraints. This could result in a request receiving search results that should have been restricted by its Scoped Search API Key. This issue only affects search requests that use both server-side search result caching and Scoped Search API Keys with embedded filters to restrict access to search results within a collection. This vulnerability may result in unintended disclosure of search results across scoped authorization contexts. This issue has been patched in versions 29.1 and 30.2.
- Product
- typesense
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Jun 12, 2026Typesense is a fast, typo-tolerant search engine.CVE-2026-47216 · Other software · typesense · reported by GitHubHigh 8.7
Typesense is a fast, typo-tolerant search engine. Prior to versions 29.1 and 30.2, there is an unauthenticated denial-of-service vulnerability in the /multi_search endpoint. A specially crafted request can trigger an unhandled exception during request processing, causing the server process to terminate. This issue can be exploited over the network without authentication and results in service unavailability. The duration of impact may vary depending on system configuration and dataset size. This issue has been patched in versions 29.1 and 30.2.
- Product
- typesense
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Jun 6, 2026Ad Inserter – Ad Manager & AdSense Ads: Reflected Cross-Site ScriptingCVE-2026-9280 · WordPress plugins & themes · reported by WordfenceMedium 6.1
The Ad Inserter – Ad Manager & AdSense Ads plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via URL Parameters in iframe Mode in all versions up to, and including, 2.8.15 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. Exploitation requires that iframe mode (AI_OPTION_IFRAME) is enabled on at least one ad block displayed on the targeted page, which is a non-default but supported configuration commonly used for AdSense and JavaScript-based ads.
- Product
- Ad Inserter – Ad Manager & AdSense Ads
- Affected
- up to 2.8.15
- What to do
- Affects up to 2.8.15. Update Ad Inserter – Ad Manager & AdSense Ads to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org
May 27, 2026A Local Privilege Escalation (LPE) vulnerability affects Acer NitroSense software versions prior to 3.01.3052.CVE-2026-9789 · Other software · Acer · reported by 8fc372e3-d9c5-46e4-9410-38469745c639High 8.5
A Local Privilege Escalation (LPE) vulnerability affects Acer NitroSense software versions prior to 3.01.3052. The vulnerability stems from the the PSAdminAgent service, which creates a Named Pipe with a weak Access Control List (ACL). This allows any authenticated local user to connect and send commands. Because the service does not check the caller's privileges before running file deletion commands, a low-privileged local user can exploit this to delete arbitrary files with system authority.
- Product
- NitrorSense V3
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
May 26, 2026Banks generates meaningful LLM prompts using a template language that makes sense.CVE-2026-44209 · Other software · masci · reported by GitHubHigh 7.5
Banks generates meaningful LLM prompts using a template language that makes sense. Prior to 2.4.2, banks uses jinja2.Environment() (unsandboxed) to render prompt templates. Applications that pass user-supplied strings as the template argument to Prompt() are vulnerable to Server-Side Template Injection (SSTI), which can lead to Remote Code Execution (RCE) on the host system. This vulnerability is fixed in 2.4.2.
- Product
- banks
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
May 24, 2026NitroSense 3.x before 3.01.3052 contains Local Privilege Escalation (LPE) vulnerability.The program exposes a Windows Named Pipe that uses a custom protocol to CVE-2026-9489 · Other software · Acer · reported by 8fc372e3-d9c5-46e4-9410-38469745c639High 8.5
NitroSense 3.x before 3.01.3052 contains Local Privilege Escalation (LPE) vulnerability.The program exposes a Windows Named Pipe that uses a custom protocol to invoke internal functions. However, this Named Pipe is misconfigured, allowing any authenticated local user to execute arbitrary code with NT AUTHORITY\SYSTEM privileges and to delete arbitrary files with SYSTEM privileges. By leveraging this, an attacker can execute arbitrary code on the target system with elevated privileges.
- Product
- NitrorSense V3
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
May 13, 2026OPNsense is a FreeBSD based firewall and routing platform.CVE-2026-45158 · Other software · opnsense · reported by GitHubCritical 9.1
OPNsense is a FreeBSD based firewall and routing platform. Prior to 26.1.8, unsanitized user input is passed to the DHCP configuration of the configured interface, which is processed by a shell script, allowing remote code execution as root on the underlying operating system. This vulnerability is fixed in 26.1.8.
- Product
- core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
May 13, 2026OPNsense is a FreeBSD based firewall and routing platform.CVE-2026-44195 · Other software · opnsense · reported by GitHubMedium 5.3
OPNsense is a FreeBSD based firewall and routing platform. Prior to 26.1.7, a logic flaw in the OPNsense lockout_handler allows an unauthenticated attacker to continuously reset the authentication failure counter for their IP address. By interjecting a crafted username containing a success keyword ("Accepted" or "Successful login") between normal brute-force attempts, an attacker can prevent the failure counter from ever reaching the lockout threshold. This vulnerability is fixed in 26.1.7.
- Product
- core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgist.github.com
May 13, 2026OPNsense is a FreeBSD based firewall and routing platform.CVE-2026-44194 · Other software · opnsense · reported by GitHubCritical 9.1
OPNsense is a FreeBSD based firewall and routing platform. Prior to 26.1.8, an authenticated Remote Code Execution (RCE) vulnerability in the OPNsense core allows a user with user-management privileges to execute arbitrary system commands as root. An attacker can bypass input validation by formatting their malicious payload as a compliant email address, allowing shell commands to reach the underlying operating system. The flaw exists in the local user synchronization flow, within core/src/opnsense/scripts/auth/sync_user.php. This vulnerability is fixed in 26.1.8.
- Product
- core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
May 13, 2026OPNsense is a FreeBSD based firewall and routing platform.CVE-2026-44193 · Other software · opnsense · reported by GitHubCritical 9.1
OPNsense is a FreeBSD based firewall and routing platform. Prior to 26.1.7, the XMLRPC method opnsense.restore_config_section fails to sanitize user supplied input leading to Remote Code Execution. This vulnerability is fixed in 26.1.7.
- Product
- core
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
May 8, 2026PredatorSense version 3.00.3136 to 3.00.3196 contain Local Privilege Escalation (LPE) vulnerability.The program exposes a Windows Named Pipe that uses a custom CVE-2026-8069 · Other software · Acer · reported by 8fc372e3-d9c5-46e4-9410-38469745c639High 8.5
PredatorSense version 3.00.3136 to 3.00.3196 contain Local Privilege Escalation (LPE) vulnerability.The program exposes a Windows Named Pipe that uses a custom protocol to invoke internal functions. However, this Named Pipe is misconfigured, allowing any authenticated local user to execute arbitrary code with NT AUTHORITY\SYSTEM privileges and to delete arbitrary files with SYSTEM privileges. By leveraging this, an attacker can execute arbitrary code on the target system with elevated privileges.
- Product
- PredatorSense V3
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
May 8, 2026Netgate pfSense CE 2.8.0 allows code execution in the XMLRPC API via pfsense.exec_php.CVE-2025-69691 · Other software · Pfsense · reported by MITRECritical 9.9
Netgate pfSense CE 2.8.0 allows code execution in the XMLRPC API via pfsense.exec_php. NOTE: the Supplier disputes this because the API call is only available to admins and they are intentionally allowed to execute PHP code.
- Product
- Pfsense
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordseclists.orglinkedin.com
May 8, 2026Netgate pfSense CE 2.7.2 allows code execution by using the module installer with a backup file with a serialized PHP object containing the post_reboot_commandsCVE-2025-69690 · Other software · Pfsense · reported by MITRECritical 9.1
Netgate pfSense CE 2.7.2 allows code execution by using the module installer with a backup file with a serialized PHP object containing the post_reboot_commands property. NOTE: the Supplier disputes this because this installer is only available to admins and they are intentionally allowed to execute PHP code.
- Product
- Pfsense
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordseclists.orglinkedin.com
Apr 23, 2026A vulnerability in SenseLive X3050’s web management interface allows unauthorized access to certain configuration endpoints due to improper access control enCVE-2026-40630 · Other software · SenseLive · reported by ics-cert@hq.dhs.govCritical 9.3
A vulnerability in SenseLive X3050’s web management interface allows unauthorized access to certain configuration endpoints due to improper access control enforcement. An attacker with network access to the device may be able to bypass the intended authentication mechanism and directly interact with sensitive configuration functions.
- Product
- X3050
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comsenselive.io
Apr 23, 2026A vulnerability in SenseLive X3050's web management interface allows critical system and network configuration parameters to be modified without sufficient valiCVE-2026-40623 · Other software · SenseLive · reported by ics-cert@hq.dhs.govHigh 7.2
A vulnerability in SenseLive X3050's web management interface allows critical system and network configuration parameters to be modified without sufficient validation and safety controls. Due to inadequate enforcement of constraints on sensitive functions, parameters such as IP addressing, watchdog timers, reconnect intervals, and service ports can be set to unsupported or unsafe values. These configuration changes directly affect core device behaviour and recovery mechanisms. The lack of proper validation and safeguards allows critical system functions to be altered in a manner that can destabilize device operation or render the device persistently unavailable.
- Product
- X3050
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comsenselive.io
Apr 23, 2026A vulnerability in SenseLive X3050’s embedded management service allows full administrative control to be established without any form of authentication or authCVE-2026-40620 · Other software · SenseLive · reported by ics-cert@hq.dhs.govCritical 9.3
A vulnerability in SenseLive X3050’s embedded management service allows full administrative control to be established without any form of authentication or authorization on the SenseLive config application. The service accepts management connections from any reachable host, enabling unrestricted modification of critical configuration parameters, operational modes, and device state through a vendor-supplied or compatible client.
- Product
- X3050
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comsenselive.io
Apr 23, 2026A vulnerability exists in SenseLive X3050’s web management interface due to its reliance on unencrypted HTTP for all administrative communication.CVE-2026-40431 · Other software · SenseLive · reported by ics-cert@hq.dhs.govMedium 6.9
A vulnerability exists in SenseLive X3050’s web management interface due to its reliance on unencrypted HTTP for all administrative communication. Because management traffic, including authentication attempts and configuration data, is transmitted in cleartext, an attacker with access to the same network segment could intercept or observe sensitive operational information.
- Product
- X3050
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comsenselive.io
Apr 23, 2026A vulnerability exists in SenseLive X3050’s web management interface in which password updates are not reliably applied due to improper handling of credential cCVE-2026-39462 · Other software · SenseLive · reported by ics-cert@hq.dhs.govCritical 9.3
A vulnerability exists in SenseLive X3050’s web management interface in which password updates are not reliably applied due to improper handling of credential changes on the backend. After the device undergoes a factory restore using the SenseLive Config 2.0 tool, the interface may indicate that the password update was successful; however, the system may continue to accept the previous or default credentials, demonstrating that the password-change process is not consistently enforced. Even after a factory reset, attempted password changes may fail to propagate correctly.
- Product
- X3050
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comsenselive.io
Apr 23, 2026A vulnerability in SenseLive X3050’s web management interface allows authentication logic to be performed entirely on the client side, relying on hardcoded valuCVE-2026-35503 · Other software · SenseLive · reported by ics-cert@hq.dhs.govCritical 9.3
A vulnerability in SenseLive X3050’s web management interface allows authentication logic to be performed entirely on the client side, relying on hardcoded values within browser-executed scripts rather than server-side verification. An attacker with access to the login page could retrieve these exposed parameters and gain unauthorized access to administrative functionality.
- Product
- X3050
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comsenselive.io
Apr 23, 2026A vulnerability in SenseLive X3050’s management ecosystem allows unauthenticated discovery of deployed units through the vendor’s management protocol, enabling CVE-2026-35064 · Other software · SenseLive · reported by ics-cert@hq.dhs.govHigh 8.7
A vulnerability in SenseLive X3050’s management ecosystem allows unauthenticated discovery of deployed units through the vendor’s management protocol, enabling identification of device presence, identifiers, and management interfaces without requiring credentials. Because discovery functions are exposed by the underlying service rather than gated by authentication, an attacker on the same network segment can rapidly enumerate targeted devices.
- Product
- X3050
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comsenselive.io
Apr 23, 2026A vulnerability exists in SenseLive X3050's web management interface that allows critical configuration parameters to be modified without sufficient authenticatCVE-2026-27843 · Other software · SenseLive · reported by ics-cert@hq.dhs.govCritical 9.2
A vulnerability exists in SenseLive X3050's web management interface that allows critical configuration parameters to be modified without sufficient authentication or server-side validation. By applying unsupported or disruptive values to recovery mechanisms and network settings, an attacker can induce a persistent lockout state. Because the device lacks a physical reset button, recovery requires specialized technical access via the console to perform a factory reset, resulting in a total denial-of-service for the gateway and its connected RS-485 downstream systems.
- Product
- X3050
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comsenselive.io
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.