Vulnerability database

15,760 results · page 2 of 316

• Oct 26, 2026vLLM is an inference and serving engine for large language models.CVE-2026-115916 · Other software · vllm-project · reported by GitHubMedium 6.5

  vLLM is an inference and serving engine for large language models. Prior to 0.32.0, vllm/tokenizers/hf.py computes max_token_id with an off-by-one upper bound, allowing a pre-tokenized prompt ID equal to the vocabulary size to pass validation. For a tensor-parallel size of one and an exact multiple-of-64 vocabulary, VocabParallelEmbedding.forward does not mask that value before F.embedding uses it, causing a CUDA device-side assertion and terminating the engine. This issue is fixed in version 0.32.0.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026vLLM is an inference and serving engine for large language models.CVE-2026-115915 · Other software · vllm-project · reported by GitHubHigh 8.1

  vLLM is an inference and serving engine for large language models. Prior to 0.32.0, ImageMediaIO passes attacker-controlled image bytes to Pillow through Image.open(BytesIO(data)) without restricting decoder selection, and the MIME label does not constrain the selected format. Image-capable request paths through parse_image() and fetch_image() can therefore dispatch an EPS payload to host components. A host with Ghostscript affected by CVE-2024-29510 can execute commands with the vLLM process's privileges, while environments using Pillow 12.0.0 through 12.2.0 can trigger CVE-2026-59203 and exhaust media-loading workers. Deployments without the applicable vulnerable dependency are not affected by that corresponding impact. This issue is fixed in version 0.32.0.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026vLLM is an inference and serving engine for large language models.CVE-2026-115914 · Other software · vllm-project · reported by GitHubMedium 6.5

  vLLM is an inference and serving engine for large language models. From 0.11.1 until 0.32.0, the DeepSeek-OCR, DeepSeek-OCR-2, and Unlimited-OCR image path allows a remote client that can reach the OpenAI-compatible API to submit a legal image whose normalized pixels sum to zero when that image is alone in its per-step encoder batch. _parse_and_validate_image_input returns no embedding, embed_multimodal propagates that value, and sanity_check_mm_encoder_outputs triggers a fatal assertion that shuts down the engine for all users. This issue is fixed in version 0.32.0.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026The Espressif AES driver drivers/crypto/crypto_esp32_aes.c advertises a multi-session cipher API — it hands out up to CONFIG_ESP32_CRYPTO_AES_SESSIONS_MAX (defaCVE-2026-82390 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgLow 3.7

  The Espressif AES driver drivers/crypto/crypto_esp32_aes.c advertises a multi-session cipher API — it hands out up to CONFIG_ESP32_CRYPTO_AES_SESSIONS_MAX (default 4) independent sessions, each carrying its own key and direction. The AES peripheral, however, has a single chip-global set of key and mode registers, and aes_begin_session() programmed them exactly once, at session start, outside the aes_lock mutex that serialises the transforms. The per-operation handlers aes_ecb_op(), aes_cbc_op() and aes_ctr_op() then ran aes_hal_transform_block() against whatever key and direction the registers happened to hold. As a result, once a second session is opened with a different key, every subsequent operation on the first session silently uses the second session's key and direction, and no error is reported. Because the key programming happened outside the lock, the correct usage pattern of "each thread does begin, then op, then free on its own session" also races: a second thread's cipher_begin_session() landing between the first thread's begin and its operation makes that operation run under the second thread's key. An attacker who can induce session creation on the device — for examp

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026In the Bluetooth Classic Hands-Free Profile Audio Gateway role, hfp_ag_create() in subsys/bluetooth/host/classic/hfp_ag.c starts an SDP discovery toward the peeCVE-2026-82389 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.5

  In the Bluetooth Classic Hands-Free Profile Audio Gateway role, hfp_ag_create() in subsys/bluetooth/host/classic/hfp_ag.c starts an SDP discovery toward the peer, which links the embedded ag->sdp_param._node into the SDP client's pending request list in subsys/bluetooth/host/classic/sdp.c. If the subsequent bt_rfcomm_dlc_connect() call fails, bt_hfp_ag_connect() cleaned up by memset()-ing the entire AG object while that node was still linked, and while ag->slc_work could still be queued on the system work queue. An in-flight SDP discovery cannot be cancelled — bt_sdp_discover_cancel() is declared in the public header but has no implementation — so the request stays in the list with its func, pool and uuid pointers zeroed. The RFCOMM channel passed to bt_hfp_ag_connect() is taken from the peer's own SDP Hands-Free service record in the normal AG flow (bt_sdp_get_proto_param() performs no range validation, and samples/bluetooth/classic/handsfree_ag feeds the value straight through), so a remote BR/EDR device in radio range that advertises an RFCOMM channel outside the valid range 0x01..0x1e deterministically forces bt_rfcomm_dlc_connect() to fail and reach the wipe. Reading the peer

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026bt_hfp_hf_connect() in subsys/bluetooth/host/classic/hfp_hf.c allocates the per-connection HFP Hands-Free object with hfp_hf_create(), which starts an SDP discoCVE-2026-82388 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.3

  bt_hfp_hf_connect() in subsys/bluetooth/host/classic/hfp_hf.c allocates the per-connection HFP Hands-Free object with hfp_hf_create(), which starts an SDP discovery by passing the object's embedded hf->sdp_param to bt_sdp_discover(). That call links the caller-owned parameter block into the SDP client's request list (session->reqs in subsys/bluetooth/host/classic/sdp.c). If the subsequent bt_rfcomm_dlc_connect() then failed, the affected code wiped the entire object with (void)memset(new_hf, 0, sizeof(*new_hf)) while that discovery was still outstanding, zeroing the sys_snode_t _node that is still linked in the SDP client's list along with the request's func, uuid and pool pointers, and zeroing the hf->slc_work work item that may already be queued on the system workqueue. The discovery could not be retracted instead: bt_sdp_discover_cancel() is declared in include/zephyr/bluetooth/classic/sdp.h but has no implementation. The failing branch is reachable with peer-supplied input. The documented use of bt_hfp_hf_connect() is to pass the RFCOMM channel read out of the remote Audio Gateway's SDP record; neither bt_sdp_get_proto_param() nor bt_hfp_hf_connect() range-checks that value, s

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026The Bluetooth host pre-allocates a bt_conn object (a "reservation") from the fixed acl_conns[] pool for every connectable advertising set it starts, in le_adv_sCVE-2026-81039 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 4.3

  The Bluetooth host pre-allocates a bt_conn object (a "reservation") from the fixed acl_conns[] pool for every connectable advertising set it starts, in le_adv_start_add_conn() in subsys/bluetooth/host/adv.c. When an incoming peripheral connection completes, find_pending_connect() in subsys/bluetooth/host/hci_core.c looked that reservation up using only the identity and the peer address, with a directed-then-undirected fallback, and had no knowledge of which advertising set actually terminated. With CONFIG_BT_EXT_ADV_MAX_ADV_SET > 1, where the LE Enhanced Connection Complete event is cached until the LE Advertising Set Terminated event identifies the set, this lookup can return the reservation belonging to a different, still-running advertising set. The defect is reachable over the air by any adjacent device. If an application runs two connectable extended advertising sets on the same identity — one undirected and one directed at a peer P (the common "directed reconnect to a bonded central while still accepting new centrals" pattern) — a remote initiator whose address maps to P connecting on the undirected set causes the directed set's reservation to be consumed instead. The initia

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.CVE-2026-81038 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.1

  The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the requested op code was BT_GATT_OTS_OACP_PROC_CHECKSUM_CALC, regardless of the result code. The response payload is a bare, uninitialized four-byte stack buffer declared with NET_BUF_SIMPLE_DEFINE(resp_param, sizeof(uint32_t)) in bt_gatt_ots_oacp_write(), and it is filled only on the success path of oacp_checksum_proc_validate(). On every failure path the buffer is still empty, so net_buf_simple_pull_le32() was invoked on a zero-length buffer. The OACP characteristic and its client characteristic configuration descriptor are declared with BT_GATT_PERM_WRITE and BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, so no pairing, encryption, or authentication is required. Any peer within radio range that can connect to a device running the OTS server can enable OACP indications and write a nine-byte Calculate Checksum command that fails validation — for example by issuing it with no object selected, which returns BT_GATT_OTS_OACP_RES_INV_OBJ. Because oacp_comma

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026The IPv6 stack derived the long-lived secret key used to compute RFC 7217 stable interface identifiers (gen_stable_iid() in subsys/net/ip/ipv6.c) and RFC 8981 tCVE-2026-19742 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgLow 3.7

  The IPv6 stack derived the long-lived secret key used to compute RFC 7217 stable interface identifiers (gen_stable_iid() in subsys/net/ip/ipv6.c) and RFC 8981 temporary interface identifiers (gen_temporary_iid() in subsys/net/ip/ipv6_pe.c) with sys_rand_get(). That API is documented as not cryptographically secure, while both RFCs require this key to be an unpredictable random value of at least 128 bits — the unpredictability of every generated IID rests entirely on it. Depending on the platform, sys_rand_get() resolves either to a hardware entropy device or, on boards whose entropy driver sets CONFIG_ENTROPY_NEEDS_PRNG, to the non-cryptographic xoshiro128++ generator in subsys/random/random_xoshiro128.c, which keeps a single global 128-bit state shared with every other sys_rand_get() consumer. Many of those consumers put their output directly on the wire (ephemeral source ports, DNS query IDs, CoAP message IDs and tokens, DHCPv6 transaction IDs, WebSocket masking keys), and the xoshiro state transition is invertible, so an observer of a device's traffic can recover the generator state and reconstruct the IID secret key. Additionally, with the entropy-device backend sys_rand_get()

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026A flaw was found in GStreamer Editing Services (gst-editing-services).CVE-2026-116612 · Other software · GStreamer project · reported by patrick@puiterwijk.orgHigh 7.8

  A flaw was found in GStreamer Editing Services (gst-editing-services). A GES project file can embed an arbitrary GStreamer pipeline description as an effect definition. When such a file is loaded, either explicitly by an editing application or automatically by a media player or file-manager thumbnailing service that uses GStreamer autoplugging, the pipeline description is parsed and instantiated without restriction on which elements may be used or which properties may be set. A remote attacker who can deliver a crafted project file to a victim's system can trigger reading or writing of arbitrary local files, issue outbound network requests to attacker-controlled servers, or cause the application to crash. Under certain conditions the file-write capability may be leveraged to achieve code execution.

  Product

  gst-editing-services

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgitlab.freedesktop.orggstreamer.freedesktop.org

• Oct 26, 2026vLLM is an inference and serving engine for large language models.CVE-2026-115913 · Other software · vllm-project · reported by GitHubMedium 6.5

  vLLM is an inference and serving engine for large language models. Prior to 0.32.0, the Phi-4 multimodal audio encoder in phi4mm_audio.py and phi4mm_utils.py uses eager attention by default, allowing a remote client to submit one legal long audio clip that causes MultiHeadedAttention.forward_attention to materialize and retain full attention matrices in self.attn. The scaled dot-product attention branch does not materialize these matrices. The resulting quadratic GPU-memory use can cause an out-of-memory condition and terminate EngineCore for all users. This issue is fixed in version 0.32.0.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026vLLM is an inference and serving engine for large language models.CVE-2026-115912 · Other software · vllm-project · reported by GitHubHigh 7.5

  vLLM is an inference and serving engine for large language models. Prior to 0.32.0, an authenticated caller can place forged shared-memory address and monotonic_id values in public multimodal features.kwargs_data. In scale-out deployments with shared-memory multimodal caching enabled, workers trust those values and pass attacker-selected bytes to pickle.loads(), allowing arbitrary Python execution even when insecure serialization is disabled. This issue is fixed in version 0.32.0.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026vLLM is an inference and serving engine for large language models.CVE-2026-115911 · Other software · vllm-project · reported by GitHubMedium 6.5

  vLLM is an inference and serving engine for large language models. From 0.19.0 until 0.32.0, authenticated callers can supply a request chat template when no server-side --chat-template is configured, or a malicious model repository can provide a template that is compiled and rendered by tokenizer.apply_chat_template() without a wall-clock timeout, output-size limit, or iteration bound. Rendering runs in a ThreadPoolExecutor with one worker by default, so a nonterminating render can block /v1/responses and other chat-template users after the request ends, while an output-expanding render can exhaust server memory. Harmony models are not affected because they do not use this Jinja path. This issue is fixed in version 0.32.0.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 26, 2026Authorization Bypass Through User-Controlled Key vulnerability in ash-project ash allows a user of one tenant to read, overwrite and take over another tenant's CVE-2026-96581 · Other software · ash-project · reported by 6b3ad84c-e1a6-4bf7-a703-f496b71e49dbHigh 7.6

  Authorization Bypass Through User-Controlled Key vulnerability in ash-project ash allows a user of one tenant to read, overwrite and take over another tenant's records via an upserting create action. Under attribute multitenancy, Ash.Actions.Create (lib/ash/actions/create/create.ex) and Ash.Actions.Create.Bulk (lib/ash/actions/create/bulk.ex) upserted on the primary key, or on an all_tenants? identity, without scoping the conflicting record to the request's tenant. A caller of a create action with upsert? true that accepts the primary key, supplying a record id from another tenant, updated that record's upsert fields and received all of its attributes in the result. With the default upsert fields the tenant attribute was written too, moving the record into the caller's tenant. Read and update policies do not run for upserts, and tenant-scoped create policies pass because the tenant is the caller's own. This issue affects ash: from 1.22.0 before 3.37.2.

  Product

  ash

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordcna.erlef.orggithub.com

• Oct 25, 2026A security vulnerability has been detected in CloudClassroom-PHP-Project.CVE-2026-116097 · Other software · reported by VulDBLow 2.1

  A security vulnerability has been detected in CloudClassroom-PHP-Project. This affects an unknown part of the file addnewstudent.php. Such manipulation of the argument fname leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The vendor was contacted early about this disclosure but did not respond in any way.

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvuldb.com

• Oct 25, 2026A vulnerability was identified in smg-project smg 1.7.0/1.8.0/1.9.0/1.10.0/1.10.1.CVE-2026-116095 · Other software · smg-project · reported by VulDBMedium 5.5

  A vulnerability was identified in smg-project smg 1.7.0/1.8.0/1.9.0/1.10.0/1.10.1. Affected is the function jpeg_turbo::decode_jpeg_rgb of the file crates/multimodal/src/jpeg_turbo.rs of the component llm-multimodal. The manipulation leads to uncontrolled memory allocation. The attack can be initiated remotely. The exploit is publicly available and might be used. Upgrading to version 1.11.0 is able to address this issue. The identifier of the patch is 8f51b57e219a914089e345b704c3c8de37a3bb8e. It is advisable to upgrade the affected component.

  Product

  smg

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgist.github.comgithub.com

• Oct 25, 2026Incorrect Authorization vulnerability in ash-project ash_postgres allows a user to read another tenant's record through a skipped upsert.CVE-2026-115635 · Other software · ash-project · reported by 6b3ad84c-e1a6-4bf7-a703-f496b71e49dbMedium 6

  Incorrect Authorization vulnerability in ash-project ash_postgres allows a user to read another tenant's record through a skipped upsert. When Ash.bulk_create/4 or a single create runs as an upsert with return_skipped_upsert?: true and the upsert is skipped (for example because its upsert_condition does not hold), AshPostgres.DataLayer reads the existing row back by the upsert identity in do_bulk_create/3 and upsert/4. That lookup did not apply the resource's attribute multitenancy, so on a resource using strategy :attribute it could match and return the row of another tenant with the same identity values, exposing its fields to the caller. This issue affects ash_postgres: from 2.6.22 before 2.15.2.

  Product

  ash_postgres

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordcna.erlef.orggithub.com

• Oct 25, 2026Incorrect Authorization vulnerability in ash-project ash_postgres allows a user to load destination records linked to a source record only through another tenanCVE-2026-115627 · Other software · ash-project · reported by 6b3ad84c-e1a6-4bf7-a703-f496b71e49dbMedium 6

  Incorrect Authorization vulnerability in ash-project ash_postgres allows a user to load destination records linked to a source record only through another tenant's join rows. When a many_to_many relationship, or a through relationship, is loaded with a lateral join (for example with a per-record limit or sort), AshPostgres.DataLayer builds the query for the join resource, and for each resource along a through path, in lateral_join_query/3 and through_step_queries/4 without running that resource's read action, which is where attribute multitenancy is applied. When those resources use strategy :attribute multitenancy, rows belonging to other tenants were joined, so the load returned destination records that the caller's tenant is not related to. This issue affects ash_postgres: from 0.38.0 before 2.15.2.

  Product

  ash_postgres

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordcna.erlef.orggithub.com

• Oct 25, 2026Incorrect Authorization vulnerability in ash-project ash allows a client to read destination records unrelated to the source record through a through relationshCVE-2026-114214 · Other software · ash-project · reported by 6b3ad84c-e1a6-4bf7-a703-f496b71e49dbMedium 6

  Incorrect Authorization vulnerability in ash-project ash allows a client to read destination records unrelated to the source record through a through relationship. When a has_many relationship declared with through: was loaded for a single record with a limit of 1, or an unsorted has_one through relationship was loaded with a limit of 1, lateral_join?/4 in lib/ash/actions/read/relationships.ex chose the path that reads the destination without any filter linking it to the source. The load returned the first destination record by sort, or any other record with an offset. The read still runs the destination's policies but carries the relationship as accessing_from, so a client paging such a field (for example teachers(limit: 1, offset: n) through AshGraphql) can enumerate destination records that policies allow only when reached through that relationship. This issue affects ash: from 3.24.0 before 3.37.1.

  Product

  ash

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordcna.erlef.orggithub.com

• Oct 25, 2026vLLM from 0.20.1 before 0.29.0 contains an improper input validation vulnerability that allows remote attackers to crash the engine by supplying out-of-vocabulaCVE-2026-116181 · Other software · vllm-project · reported by VulnCheckHigh 7.1

  vLLM from 0.20.1 before 0.29.0 contains an improper input validation vulnerability that allows remote attackers to crash the engine by supplying out-of-vocabulary stop_token_ids. Attackers can send OpenAI chat, completion, generate, or batch requests with invalid IDs to terminate the engine or write outside the V2 runner's logits buffer.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 25, 2026vLLM from 0.8.5 before 0.31.0 has a denial of service flaw.CVE-2026-116180 · Other software · vllm-project · reported by VulnCheckHigh 8.3

  vLLM from 0.8.5 before 0.31.0 has a denial of service flaw. LogprobsTensors.empty_cpu() in vllm/v1/outputs.py allocates an uninitialized int32 tensor, and the V1 model runner leaves prompt positions reported as computed by a KV connector unwritten. A client sharing the engine can send prompt_logprobs (or echo with logprobs) against a connector-cached prefix, making tokenizer decode raise OverflowError, which crashes EngineCore and drops all co-tenant requests.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 25, 2026vLLM from 0.18.0 before 0.31.0 contains a resource exhaustion vulnerability that allows API clients to bypass the video/jpeg frame-count cap by overriding num_fCVE-2026-116179 · Other software · vllm-project · reported by VulnCheckHigh 8.7

  vLLM from 0.18.0 before 0.31.0 contains a resource exhaustion vulnerability that allows API clients to bypass the video/jpeg frame-count cap by overriding num_frames through media_io_kwargs. Attackers can set num_frames to -1 with a large inline video so VideoMediaIO.load_base64 decodes every frame, exhausting memory and crashing the API frontend.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 25, 2026vLLM from 0.20.0 before 0.30.0 contains a denial of service vulnerability that allows remote attackers to crash the engine by sending inconsistent multimodal meCVE-2026-116178 · Other software · vllm-project · reported by VulnCheckHigh 8.2

  vLLM from 0.20.0 before 0.30.0 contains a denial of service vulnerability that allows remote attackers to crash the engine by sending inconsistent multimodal metadata to the disaggregated /inference/v1/generate endpoint. Attackers can replay a valid multimodal item with repeated or overlapping mm_placeholders ranges or mismatched kwargs_data and mm_hashes lists, producing a negative text span in Qwen2.5-VL position construction that terminates the engine.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 25, 2026vLLM from 0.10.2 before 0.25.0 contains an uncontrolled resource consumption vulnerability that allows unauthenticated attackers to exhaust memory because the NCVE-2026-116177 · Other software · vllm-project · reported by VulnCheckHigh 8.7

  vLLM from 0.10.2 before 0.25.0 contains an uncontrolled resource consumption vulnerability that allows unauthenticated attackers to exhaust memory because the Nemotron-VL processors globally set Image.MAX_IMAGE_PIXELS to None. Attackers can submit a pathological decompression-bomb image to /v1/chat/completions to OOM-kill the worker and deny service to co-tenants.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 25, 2026vLLM from 0.9.2 before 0.24.0 contains a server-side request forgery vulnerability that allows API callers to force outbound connections by embedding a decode aCVE-2026-116176 · Other software · vllm-project · reported by VulnCheckHigh 8.8

  vLLM from 0.9.2 before 0.24.0 contains a server-side request forgery vulnerability that allows API callers to force outbound connections by embedding a decode address in the X-Request-Id header. Attackers can make a P2pNcclConnector prefill worker ZMQ-connect to an attacker host, leaking the NCCL unique_id and KV-cache tensors or blocking the worker.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 25, 2026vLLM from 0.19.0 before 0.24.0 contains a decompression bomb vulnerability because the AudioMediaIO multimodal path calls load_audio without the max_duration_s CVE-2026-116175 · Other software · vllm-project · reported by VulnCheckHigh 7.1

  vLLM from 0.19.0 before 0.24.0 contains a decompression bomb vulnerability because the AudioMediaIO multimodal path calls load_audio without the max_duration_s decoded-duration limit. Authenticated attackers can send small compressed audio via input_audio or audio_url in /v1/chat/completions requests that expands to huge decoded PCM, exhausting server memory.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 25, 2026vLLM from 0.22.0 before 0.24.0 contains an improper input validation vulnerability in the Rust gRPC Generate and GenerateStream service that forwards unchecked CVE-2026-116174 · Other software · vllm-project · reported by VulnCheckHigh 8.2

  vLLM from 0.22.0 before 0.24.0 contains an improper input validation vulnerability in the Rust gRPC Generate and GenerateStream service that forwards unchecked prompt token IDs to EngineCore. Attackers can submit requests with out-of-vocabulary prompt.token_ids values to trigger a fatal embedding lookup failure that terminates EngineCore and leaves the server unhealthy.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 25, 2026vLLM from 0.22.0 before 0.24.0 contains a denial of service vulnerability that allows remote attackers to terminate EngineCore by bypassing logprob_token_ids liCVE-2026-116173 · Other software · vllm-project · reported by VulnCheckHigh 8.2

  vLLM from 0.22.0 before 0.24.0 contains a denial of service vulnerability that allows remote attackers to terminate EngineCore by bypassing logprob_token_ids limits in the Rust gRPC frontend. Attackers can send Generate or GenerateStream requests with output_logprobs enabled and more than 128 output_candidates.token_ids, triggering a fatal sampler exception that crashes the engine.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 25, 2026vLLM from 0.22.0 before 0.24.0 contains an improper input validation vulnerability in the Rust gRPC converter that allows remote attackers to bypass max_logprobCVE-2026-116172 · Other software · vllm-project · reported by VulnCheckHigh 8.2

  vLLM from 0.22.0 before 0.24.0 contains an improper input validation vulnerability in the Rust gRPC converter that allows remote attackers to bypass max_logprobs limits via CandidateTokens.top_n. Attackers can send Generate or GenerateStream requests with oversized or integer-wrapping top_n values to trigger torch.topk failures that terminate EngineCore.

  Product

  vllm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 25, 2026ProjectSend 2.0.0 through 2.7.1 contains an incomplete authorization vulnerability in FileVersions::link() that allows staff users to share files without authorCVE-2026-116136 · Other software · projectsend · reported by VulnCheckMedium 6

  ProjectSend 2.0.0 through 2.7.1 contains an incomplete authorization vulnerability in FileVersions::link() that allows staff users to share files without authorization by linking file versions. Attackers can link their file onto an intermediate revision or assign out-of-scope clients, causing moveAssignmentsToRoot() to expose protected original files to unauthorized clients.

  Product

  ProjectSend

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 24, 2026DaybydayCRM through 2.2.1 contains a missing authorization vulnerability in ProjectsController::updateAssign() that allows any authenticated user to reassign prCVE-2026-116008 · Other software · Bottelet · reported by VulnCheckMedium 5.3

  DaybydayCRM through 2.2.1 contains a missing authorization vulnerability in ProjectsController::updateAssign() that allows any authenticated user to reassign projects without the can-assign-new-user-to-project permission. Low-privileged employees can send PATCH or POST requests to /projects/updateassign/{external_id} with a chosen user_assigned_id to redirect project ownership and notifications.

  Product

  DaybydayCRM

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 24, 2026BOLA Allows Cross-Project Target Tampering  in Cervantes version v1.3-beta could allow an attacker modify or delete targets belonging to other projects without CVE-2026-115994 · Other software · CervantesSec · reported by 772f0079-75c2-41ca-913e-d9072716578bMedium 5.4

  BOLA Allows Cross-Project Target Tampering  in Cervantes version v1.3-beta could allow an attacker modify or delete targets belonging to other projects without authorization, compromising the integrity of penetration testing scopes, results, and associated security reports.

  Product

  cervantes

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgrayback.esgrayback.es

• Oct 23, 2026The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB CVE-2026-79982 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 8.8

  The Bluetooth HCI USB transport class of the new USB device stack, subsys/usb/device_next/class/bt_hci.c, copies every controller-to-host HCI packet into a USB transfer buffer before enqueuing it on an endpoint. bt_hci_tx_sync_in() allocated that buffer from bt_hci_ep_pool, a fixed pool whose slots are only USBD_MAX_BULK_MPS bytes (64 on full-speed-only builds), and then performed net_buf_add_mem(buf, bt_buf->data, bt_buf->len) with no length check. HCI event and ACL buffers are sized by CONFIG_BT_BUF_EVT_RX_SIZE and CONFIG_BT_BUF_ACL_RX_SIZE and can be far larger, so the copy runs past the end of the 64-byte slot into the adjacent slots and into whatever follows the statically allocated pool. The device runs the local Bluetooth controller in raw HCI mode (CONFIG_BT_HCI_RAW), so the oversized packets originate over the air. With the HCI buffer sizes recommended for full-featured controllers, an unauthenticated attacker within Bluetooth range can supply the overflowing bytes: a connected peer that negotiates Data Length Extension can send ACL fragments up to CONFIG_BT_CTLR_DATA_LENGTH_MAX bytes, and an attacker that merely broadcasts extended advertising data reaches the same path

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026The DNS stub resolver in subsys/net/lib/dns/resolve.c binds one UDP socket per configured server when the resolver context is initialised (dns_resolve_init_lockCVE-2026-79981 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 6.5

  The DNS stub resolver in subsys/net/lib/dns/resolve.c binds one UDP socket per configured server when the resolver context is initialised (dns_resolve_init_locked() -> register_dispatcher() -> dns_dispatcher_register()), with the local port left at 0 so the stack picks an ephemeral port exactly once. dns_write() then sends every subsequent query from that same socket without re-binding, so the source port is constant for the lifetime of the resolver context while only the 16-bit transaction identifier (ctx->queries[i].id, drawn with sys_rand16_get()) varies per query. RFC 5452 section 9.2 requires both to vary; with a fixed port, an off-path attacker has to guess only the identifier. The stable port is cheap to learn. Any single observed query reveals it permanently, and it can also be found by probing the ephemeral UDP range: subsys/net/ip/connection.c answers unmatched unicast UDP with an ICMP port-unreachable, so the resolver's socket is the one port in that range that stays silent. Acceptance of a reply is decided solely by get_slot_by_id() matching the transaction identifier and a CRC-16 of the queried name — the reply's source address is never checked (dispatcher_cb() does A

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transactiCVE-2026-79980 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgMedium 5.6

  The DHCPv4 client in subsys/net/lib/dhcpv4/dhcpv4.c maintained its transaction identifier (iface->config.dhcpv4.xid) as a counter rather than as a per-transaction random value. It was seeded once with sys_rand32_get() in dhcpv4_start_internal(), incremented by one in dhcpv4_send_discover() and dhcpv4_send_decline(), and never changed by dhcpv4_send_request() — so every RENEWING and REBINDING exchange reused, unchanged, the identifier that had already appeared on the wire in the broadcast DHCPDISCOVER at boot, and where the identifier did move it moved predictably by one. RFC 2131 4.1 requires a single identifier per transaction, chosen so that clients are unlikely to collide. This identifier is the client's only unpredictable reply-validation token. net_dhcpv4_input() accepts a BOOTP reply on op, a matching xid, and a matching chaddr (the interface MAC, which is public); the UDP callback is registered with a wildcard remote address and port, and no server-identifier or source-address check is applied. An attacker who learns one identifier — for example any host on the same segment that sees the broadcast DHCPDISCOVER, or a DHCP server or relay on a network the device previously jo

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026The arm64 MMU backend invalidates a single virtual address from the TLB with invalidate_tlb_page() in arch/arm64/core/mmu.c, which issued TLBI VAE1{IS} with an CVE-2026-79979 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.8

  The arm64 MMU backend invalidates a single virtual address from the TLB with invalidate_tlb_page() in arch/arm64/core/mmu.c, which issued TLBI VAE1{IS} with an operand of virt >> 12. That operand encodes the ASID in bits [63:48], so the invalidation only ever matched ASID 0 (the kernel page tables) and global entries. Memory domains, however, are allocated ASIDs starting at 1 in arch_mem_domain_init(), and every domain-private leaf created by private_map() is mapped with MT_NG, i.e. non-global. A domain's cached translation therefore survived the invalidation. All callers of invalidate_tlb_page() are demand-paging paths. When the eviction algorithm reclaims a frame, page_frame_prepare_locked() in kernel/mmu.c calls arch_mem_page_out(), which marks the kernel leaf invalid, propagates the invalid descriptor into every domain via sync_domains(), and then flushes only ASID 0. do_page_fault() immediately reuses the very same page frame for the incoming mapping through arch_mem_page_in(). A user thread that had already touched the evicted page — a k_mem_partition added with arch_mem_domain_partition_add(), or its own stack mapped by map_thread_stack() — retains a valid EL0 read/write tr

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026The RTIO streaming completion callback adxl345_process_fifo_samples_cb() in drivers/sensor/adi/adxl345/adxl345_stream.c clamps the amount of FIFO data it will rCVE-2026-79978 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgLow 3.6

  The RTIO streaming completion callback adxl345_process_fifo_samples_cb() in drivers/sensor/adi/adxl345/adxl345_stream.c clamps the amount of FIFO data it will report (read_len = MIN(fifo_bytes, buf_avail)) to the space actually returned by rtio_sqe_rx_buf(), but then queues one 6-byte bus read per hardware FIFO entry at consecutive offsets from read_buf, bounded by the device-reported entry count rather than by the clamp. When the allocated buffer is smaller than a full batch, the driver writes up to 186 bytes past the end of the allocation; a companion defect left data->fifo_total_bytes un-reset at batch start, so an aborted or errored chain could leave a stale write offset that pushes the next batch's writes out of bounds as well. A short buffer is an expected, first-class outcome of the RTIO allocator: rtio_block_pool_alloc() walks the requested size down one block at a time until a contiguous run is available, and the driver only demands sizeof(struct adxl345_fifo_data) + 6 bytes as its minimum. Any streaming configuration whose mempool block granularity is smaller than a full FIFO batch (204 bytes) — for example the sensor shell's RTIO_DEFINE_WITH_MEMPOOL(sensor_read_rtio, 8,

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate.CVE-2026-79977 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 8.2

  The WireGuard VPN service in subsys/net/lib/wireguard/wg.c updated the peer endpoint from a message it could not authenticate. In handle_transport_data(), when the 32-bit receiver index of an incoming transport-data message matched no session, the code both scheduled a new handshake and copied the datagram's source address into peer->endpoint with memcpy(&peer->endpoint, peer_addr, sizeof(peer->endpoint)). Because the receiver index is unknown, there is no key with which such a message could be verified, so the address written into peer->endpoint is entirely attacker-supplied. Every other endpoint update in the implementation happens only after authentication — after the Noise handshake in handle_handshake_init(), or after AEAD decryption plus the anti-replay check in wg_process_data_message(). The WireGuard listener is registered with net_udp_register() using no remote address or port filter and defaults to UDP port 51820 (CONFIG_WIREGUARD_PORT), and wg_ctrl_recv() resolves the peer by interface rather than by any cryptographic identity. Any host able to send a UDP datagram to that port can therefore reach the defect off-path, with no need to observe legitimate traffic: a 16-byte

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/opentCVE-2026-19741 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.5

  Zephyr's OpenThread integration defined CONFIG_OPENTHREAD_JOINER_PSKD with default "J01NME" in modules/openthread/Kconfig.thread (previously subsys/net/l2/openthread/Kconfig, then subsys/net/l2/openthread/Kconfig.thread). J01NME is the example Joining Device Credential used throughout the public OpenThread and Thread commissioning documentation, including Zephyr's own samples/net/sockets/echo_client/README.rst, so it is not a secret. A firmware image built with CONFIG_OPENTHREAD_JOINER_AUTOSTART=y that never overrode the PSKd therefore shipped with a publicly known joining credential compiled in, with no build-time or run-time warning. The PSKd is the only value that authenticates Thread commissioning: joiner and commissioner run a DTLS-PSK handshake keyed on it, after which the commissioner supplies the full operational dataset. In ot_configure_instance() (modules/openthread/openthread.c), a device with no stored dataset calls otJoinerStart() with the configured PSKd, and ot_joiner_start_handler() calls otThreadSetEnabled() on success. An unauthenticated attacker within 802.15.4 radio range of an uncommissioned device (factory-fresh, after a factory reset, or after a settings era

  Product

  zephyr

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026baserCMS is a website development framework.CVE-2026-115481 · Other software · baserproject · reported by GitHubHigh 8.5

  baserCMS is a website development framework. Starting in version 5.0.0-beta1 and prior to versions 5.3.2 and 5.4.2, `PermissionGroupsService::build()` reads a plugin's `config/permission.php` to decide what each user group may reach. When that file is absent it writes a wildcard allow rule instead: `url` `/baser/<prefix>/<plugin>/*`, `method` `*`, `auth` true, for every non-admin group. BcCustomContent has no such file in any release. After an administrator installs it, the default `operators` group can store and execute arbitrary PHP under the document root. Versions 5.3.2 and 5.4.2 patch the issue.

  Product

  basercms

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026baserCMS is a website development framework.CVE-2026-115480 · Other software · baserproject · reported by GitHubMedium 5.3

  baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the public POST /baser/api/bc-mail/mail_messages/add/{mailContentId}.json endpoint accepts submissions without enforcing the form's auth_captcha setting. BcMail\Controller\Api\MailMessagesController::add() and MailMessagesService::create() omit the BcCaptchaService::check() verification of captcha_id and auth_captcha performed by MailController::submit() in the web UI. An unauthenticated attacker who can reach the API can therefore automate submissions without solving the enabled image challenge. The API disables FormProtection and has no rate limit; submissions can generate administrator-inbox spam, send attacker-influenced auto-replies to third parties when an email field is present, and accumulate mail_messages database records when save_info is enabled. The API already enforces the isAccepting() check added for CVE-2026-30878; the missing CAPTCHA check is a separate control failure. This issue has been patched in versions 5.3.2 and 5.4.2.

  Product

  basercms

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026baserCMS is a website development framework.CVE-2026-115479 · Other software · baserproject · reported by GitHubMedium 5.3

  baserCMS is a website development framework. In versions 5.2.5 before 5.3.2 and 5.4.0 before 5.4.2, an unauthenticated visitor can supply a comma-separated address list in a public mail form's email field and cause a single auto-reply to be addressed to multiple third parties. MailMessageMailer::sendFormToUser() passes the visitor-controlled userMail value to parseAndNormalizeMailAddresses(), which splits it with explode(',') and supplies every resulting address to setTo(). Newly created forms with an email-type field are affected when the separate, optional VALID_EMAIL server-side validation is not enabled; browser type=email validation does not prevent crafted requests. The bundled contact form enables VALID_EMAIL and is not affected. The auto-reply uses the site's sender identity and includes partially attacker-controlled content, allowing abuse of the site to deliver unsolicited mail. This issue has been patched in versions 5.3.2 and 5.4.2.

  Product

  basercms

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026baserCMS is a website development framework.CVE-2026-115457 · Other software · baserproject · reported by GitHubHigh 7.1

  baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, global shortcode expansion runs over the complete rendered page, including HTML-escaped blog comments supplied by unauthenticated visitors. A comment containing the BcBaser.getGoogleMaps shortcode can set apiBaseUrl to an attacker-controlled script URL, which is emitted as a script src and executes JavaScript on the site's origin when another visitor or administrator opens the article displaying that comment. Escaping raw HTML in comments does not prevent this stored cross-site scripting because shortcode processing happens after HTML rendering. Other registered shortcodes also expand in comments; Mail.getForm can embed a working contact form with a valid CSRF token. The flaw can compromise the authenticated browser context of an administrator who views the affected article. This issue has been patched in versions 5.3.2 and 5.4.2.

  Product

  basercms

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026baserCMS is a website development framework.CVE-2026-114624 · Other software · baserproject · reported by GitHubHigh 7.2

  baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, the widget-area entity serializes widgets only when the submitted value is an array, allowing a string submitted through the admin JSON API to be stored unchanged. Entity reads, including front-end rendering and API responses, deserialize the stored value with unserialize() without an allowed_classes restriction, accepting both raw and base64-encoded serialized data. An administrator, or an attacker who obtains widget-write capability through a separate vulnerability such as chained XSS, can plant an object graph that subsequently triggers on unauthenticated page requests. Two demonstrated gadget chains in the default dependency set use composer/composer ProcessExecutor::startJob() with Process::fromShellCommandline(), or logiscape/mcp-sdk-php StdioTransport::connect() with StdioServerParameters, to reach proc_open() and execute commands as the web-server user. Deserialization bypasses constructor-based readonly safeguards, and the stored payload can execute repeatedly until the database row is repaired. Unauthenticated page access is a trigger after privileged payload storage, not a

  Product

  basercms

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026baserCMS is a website development framework.CVE-2026-114623 · Other software · baserproject · reported by GitHubMedium 6.5

  baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, an authenticated user with only theme-file view permission can traverse outside the theme directory through the optional BcThemeFile plugin's Admin web screen. ThemeFilesController::parseArgs() constructs a path containing literal ../ segments, and the view and edit actions pass it to ThemeFilesService::get() without containment validation. Authorization checks the unresolved request path, after which ThemeFile::_getContents() reads the resolved file and exposes its contents in the form textarea. A client must preserve the dot segments rather than normalize them away. Readable files are limited to .php, .css, .js, and .ctp; this can disclose application source and config/install.php database credentials in MySQL or PostgreSQL deployments, while SQLite configurations have an empty database password. Reading config/app_local.php may expose the Security.salt fallback, which is effective only when not overridden by environment configuration. The flaw does not disclose .env, .pem, or SQLite .db files, does not itself permit file writes or code execution, and does not affect the separate A

  Product

  basercms

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026baserCMS is a website development framework.CVE-2026-114622 · Other software · baserproject · reported by GitHubHigh 7.2

  baserCMS is a website development framework. In versions 5.2.3 before 5.3.2 and 5.4.0 before 5.4.2, the optional BcThemeFile plugin's Admin API validates a raw path in ThemeFilesService::update() and getFullpath(), but ThemeFileForm::_execute() subsequently applies rawurldecode() to fullpath before writing. Because normalizePath() resolves only literal dot segments, percent-encoded traversal can pass the containment checks and become a path outside the theme directory at the write sink. An authenticated administrator can write PHP files into writable locations such as webroot and execute them, exceeding the intended theme-template editing boundary. The source also identifies the same check-before-decode ordering in ThemeFilesService::copy(), although that path was not dynamically verified. Exploitation requires the non-default plugin, an administrator session, and a same-origin Origin header; USE_CORE_ADMIN_API=false does not block session-authenticated requests. The Admin web form is not affected by this encoded-path tampering because FormProtection protects fullpath. This is a third bypass of the protections associated with CVE-2026-30940, using encoded traversal decoded after va

  Product

  basercms

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 23, 2026baserCMS is a website development framework.CVE-2026-114621 · Other software · baserproject · reported by GitHubHigh 8.8

  baserCMS is a website development framework. In versions 5.0.0 before 5.3.2 and 5.4.0 before 5.4.2, list and detail actions in the Admin and Api/Admin prefixes pass request query parameters, including contain, conditions, fields, finder, and order, directly to the ORM as options. A user able to log into the admin panel can embed SQL fragments in those options to execute arbitrary SQL against the application's database, including reading password hashes from the users table. Public-page and public-API fixes released in 5.3.1 and 5.4.1 did not protect these administrative paths. Setting USE_CORE_ADMIN_API to false does not prevent access through an authenticated browser session. This issue has been patched in versions 5.3.2 and 5.4.2.

  Product

  basercms

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Oct 22, 2026Incus 7.0.1 before 7.0.2 and 7.2.0 before 7.5.0 contains an authorization bypass vulnerability that allows project-restricted clients to copy volumes by omittinCVE-2026-115376 · Other software · lxc · reported by VulnCheckHigh 8.3

  Incus 7.0.1 before 7.0.2 and 7.2.0 before 7.5.0 contains an authorization bypass vulnerability that allows project-restricted clients to copy volumes by omitting source.type. Attackers can send crafted POST requests to the custom volumes endpoint with a chosen source.project to copy and read other projects' volumes, snapshots, and configuration.

  Product

  incus

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 22, 2026Incus before 6.0.7, 6.1.0 before 7.0.2, and 7.1.0 before 7.5.0 contains a missing authorization vulnerability in GET /1.0/operations/{uuid} that lets project-reCVE-2026-115373 · Other software · lxc · reported by VulnCheckHigh 7

  Incus before 6.0.7, 6.1.0 before 7.0.2, and 7.1.0 before 7.5.0 contains a missing authorization vulnerability in GET /1.0/operations/{uuid} that lets project-restricted clients read operations in other projects. Attackers holding a restricted certificate and a known operation UUID can retrieve command lines, environment secrets, websocket secrets, and trust enrolment tokens.

  Product

  incus

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Oct 22, 2026Incus from 7.3.0 before 7.5.0 contains a project restriction bypass that allows restricted project users to set block.create_options through volume update, copyCVE-2026-115372 · Other software · lxc · reported by VulnCheckCritical 9

  Incus from 7.3.0 before 7.5.0 contains a project restriction bypass that allows restricted project users to set block.create_options through volume update, copy, and move operations. Attackers can set the option on a custom volume and trigger a copy or move onto a formatting pool to inject arguments into mkfs executed as root.

  Product

  incus

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.