Vulnerability database

21,994 results · page 19 of 440

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: neighbour: Enforce min/max to NDTPA_INTERVAL_PROBE_TIME_MS.CVE-2026-98317 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: neighbour: Enforce min/max to NDTPA_INTERVAL_PROBE_TIME_MS. NDTPA_INTERVAL_PROBE_TIME_MS sets .type and .min but misses .validation_type, so no validation is applied: # ynl --family rt-neigh --do setneightbl \ --json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 0}}' # ynl --family rt-neigh --dump getneightbl --output-json | \ jq '.[] | select(.name == "arp_cache" and has("config")) | .parms["interval-probe-time-ms"]' 0 Moreover, nla_get_msecs() uses msecs_to_jiffies(), and u64 is silently cast to u32, so a larger value can bypass the min check: e.g. 4294967296 == 0x100000000 # ynl --family rt-neigh --do setneightbl \ --json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 4294967296}}' # ynl --family rt-neigh --dump getneightbl --output-json | \ jq '.[] | select(.name == "arp_cache" and has("config")) | .parms["interval-probe-time-ms"]' 0 msecs_to_jiffies() returns MAX_JIFFY_OFFSET if the value is larger than INT_MAX. Also, INT_MAX ms overflows int NEIGH_VAR() when HZ > 1000 (Alpha, MIPS), and passing a negative integer to queue_delayed_wor

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix race between rawmidi and disconnect Although we tried to fix the potentCVE-2026-98316 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix race between rawmidi and disconnect Although we tried to fix the potential UAF issues at USB disconnect on bcd2000 driver, there is still an overlooked case -- namely, when a rawmidi trigger callback has been already running at USB disconnect handling, the in-flight function (e.g. bcd2000_midi_send()) could still access the URB, because the previous URB NULL-check & clearance was considered only for the URB complete callbacks, but not about the parallel rawmidi operations. For addressing the race, this patch introduced a new spinlock that covers each rawmidi operation as well as the rawmidi handling in the complete callback. The URB is cleared with the lock, so it guarantees that the pending rawmidi task already finished or a NULL check is effective.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs: protect runlist updates with the runlist lock ntfs_non_resident_attr_shrink() calls CVE-2026-98315 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ntfs: protect runlist updates with the runlist lock ntfs_non_resident_attr_shrink() calls runlist helpers that require the runlist write lock, but did not hold it while freeing clusters and truncating the runlist. Serialize those operations and the resident conversion with the runlist lock. ntfs_attr_map_cluster() can merge a newly allocated run before updating mapping pairs. If the update fails, free the clusters and restore both the in-memory runlist and on-disk mapping pairs from a saved runlist. Mark the volume in error if either rollback step fails.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: set timer->private_data before registering the PCM timer snd_pcm_timer_init() cCVE-2026-98314 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: set timer->private_data before registering the PCM timer snd_pcm_timer_init() calls snd_device_register() to link the new struct snd_timer into the global timer list while it still carries hw.c_resolution = snd_pcm_timer_resolution (and hw.start/hw.stop), and only afterwards sets timer->private_data = substream. Once the timer is on the list under register_mutex, a concurrent reader can already reach it through the same mutex and invoke these callbacks. /proc/asound/timers does this via c_resolution(), and snd_timer_open()+snd_timer_start() reach start()/stop() the same way. All three dereference timer->private_data, which for this brief window is NULL, giving a NULL-pointer dereference: substream = timer->private_data; return substream->runtime ? ... // substream is NULL Move the private_data/private_free assignment before snd_device_register() so the timer is never visible on the list without its private_data set. On the snd_device_register() failure path, private_free() (snd_pcm_timer_free()) can now run, but it only does substream->timer = NULL, which is already NULL at that point since su

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: skip PUSH_IDLE when the link was never enabled msm_dp_display_atomic_enable() CVE-2026-98313 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: skip PUSH_IDLE when the link was never enabled msm_dp_display_atomic_enable() returns early when link training fails, leaving ->power_on false and the main link down. msm_dp_display_atomic_disable() nevertheless writes DP_STATE_CTRL_PUSH_IDLE and waits for an idle-pattern completion that cannot arrive, so every failed enable is followed by "PUSH_IDLE pattern timedout". Every other step of the teardown is already gated on that flag: msm_dp_display_disable(), called from .atomic_post_disable(), returns early on !power_on. The PUSH_IDLE write is the only one that is not, so the controller's runtime-PM reference is then dropped without the link having been taken down. On glymur (Snapdragon X2 Elite) the consequence is not a warning. The SoC does not survive it: TrustZone force-stops the SOCCP and ADSP remote processors and the machine resets silently about 50 ms later, with no oops and no panic. On an ASUS Zenbook A16 (UX3607OA), whose eDP panel does not currently train, this reproduces without any compositor or GPU involvement: # eDP enable has already failed with "Failed link training (rc=-104)"

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix OOB write from device-reported iso length usb6fire_pcm_in_urb_handler() sCVE-2026-98312 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix OOB write from device-reported iso length usb6fire_pcm_in_urb_handler() sizes each outgoing isochronous packet as (actual_length - 4) / (in_n_analog << 2) * (out_n_analog << 2) + 4, where actual_length is the unsigned length the device reported for the matching IN packet. A packet completed with status 0 and actual_length < 4 wraps the subtraction to 0x7fffffec; a zero-length isochronous packet is legal on the bus, and the preceding loop rejects only non-zero status. The sum reaches memset() on out_urb->buffer, a 4832-byte object from kcalloc(PCM_MAX_PACKET_SIZE, PCM_N_PACKETS_PER_URB). Even without the wrap the result is out of bounds: at 88.2/96 kHz the 4-in/6-out scaling turns a full 420-byte IN packet into 628, so eight packets span 5024 bytes of that buffer. usb_submit_urb() rejects an over-long descriptor only after the memset() and the usb6fire_pcm_playback() copy of user PCM data have run. Guard the subtraction as the sibling usb6fire_pcm_capture() already does, and limit the frame count to what fits in rt->out_packet_size, the OUT endpoint's wMaxPacketSize. This bounds total_length

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: don't transfer operstate before register virt_wifi_newlink() calls netif_CVE-2026-98311 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: don't transfer operstate before register virt_wifi_newlink() calls netif_stacked_transfer_operstate() before register_netdevice(). If the lower device is dormant, that queues the new netdev on lweventlist while it is still uninitialized. If registration fails after that, for example because of an invalid name such as "bad/name", free_netdev() immediately frees the object. A later linkwatch_fire_event() then use-after-frees the list entry. Move the transfer to after netdev_upper_dev_link(), as macvlan and ipvlan already do.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory __xe_shrinker_waCVE-2026-98310 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory __xe_shrinker_walk() walks the SYSTEM and TT LRUs without a runtime PM reference. Shrinking a bo outside system memory invalidates its GPU mappings, which needs the device resumed, so while it is runtime suspended the page table zap trips an assert and the TLB invalidation returns -ENODEV: WARNING: drivers/gpu/drm/xe/xe_bo.c:770 at xe_bo_move_notify+0x1fc/0x450 [xe] xe_bo_shrink+0x20f/0x2b0 [xe] __xe_shrinker_walk+0x174/0x410 [xe] xe_shrinker_scan+0x10c/0x1e0 [xe] do_shrink_slab+0x176/0x7e0 drop_caches_sysctl_handler+0x9c/0xf0 Take a reference before walking a memory type other than XE_PL_SYSTEM and stop there if it cannot be acquired. Reuse the shrinker's existing acquire path, which resumes the device directly where reclaim allows that and otherwise queues the PM worker for a later scan. Stop the walk once the scan target is met, so a satisfied scan does not wake the device. System memory is still reclaimed while the device is suspended. Gate this on xe_device_is_l2_flush_optimized(), the same condition under which

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Use managed KMS polling to fix UAF on unbind vc4_kms_load() calls drm_kms_helper_CVE-2026-98309 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Use managed KMS polling to fix UAF on unbind vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides no matching drm_kms_helper_poll_fini(). The output poll work stays scheduled after unbind and runs on the freed drm_device: # modprobe vc4; rmmod vc4; sleep 10 BUG: KASAN: slab-use-after-free in delayed_work_timer_fn BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm] Workqueue: events output_poll_execute [drm_kms_helper] Allocated by task 171: __devm_drm_dev_alloc Freed by task 262 (rmmod): drm_dev_put / component_del Use drmm_kms_helper_poll_init() so polling is finalized with the device, as other drivers do.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: trace PCM open only after assigning a stream Stream assignment can fail when haCVE-2026-98308 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: trace PCM open only after assigning a stream Stream assignment can fail when hardware streams are exhausted. Move the tracepoint after the NULL check because its payload accesses the assigned stream tag. Detected by static analysis and reviewed with AI-assisted source auditing.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all() When mac80211 removes a sta, CVE-2026-98307 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all() When mac80211 removes a sta, it calls .sta_state() which in turn calls ath11k_mac_station_remove(). In that function we clean up both peers & arsta related resources. But when the firmware crashes, ath11k calls ieee80211_restart_hw(), which assumes that all driver related resources are cleaned up beforehand. This cleanup is supposedly done by ath11k_mac_peer_cleanup_all() but does not in fact free arsta->rx_stats / tx_stats. Extract the arsta cleanup from ath11k_mac_station_remove() into a new ath11k_mac_station_cleanup() and call it from both there and ath11k_mac_peer_cleanup_all(). This should handle kmemleaks reports like: unreferenced object 0xffffff801ae66400 (size 1024): comm "hostapd", pid 1306, jiffies 4295011565 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc d61c08ec): kmemleak_alloc+0x3c/0x50 __kmalloc_cache_noprof+0x2b0/0x3e0 ath11k_mac_op_sta_state+0x1dc/0xb10 drv_sta_state+

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation When an SRv6 packet arriCVE-2026-98306 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation When an SRv6 packet arrives on an interface enslaved to a VRF, vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate() has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of a reassembled outer packet could even set it, with no VRF involved. Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP decapsulation") then made the unreliable bit reliably clear. The effect of the missing flag is visible with End.DX4 when a delivery to a local address of the node reaches the socket lookup. For example, a UDP socket bound to the enslaved ingress interface does not receive any of the decapsulated packets, while an unbound socket outside the VRF does. This contradicts Documentation/networking/vrf.rst: by default the scope of an unbound UDP or TCP socket is limited to the default VRF. Set IPSKB_L3SLAVE for IPv4 in decap_and_validate(), which already does the same for IPv6. The socket lookup then matches the decapsulated packet like any other packet receive

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: dsa: mxl862xx: disable the stats poll on teardown mxl862xx_setup() arms the stats polCVE-2026-98305 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net: dsa: mxl862xx: disable the stats poll on teardown mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and nothing stops it until dsa_register_switch() has returned an error to mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a poll that fires once .setup or a later step of dsa_tree_setup() has failed walks freed ports. On shutdown the user ports stay registered, and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag before it was set queues the poll after cancel_delayed_work_sync() has returned. Arm the poll once .setup has succeeded and stop it from a .teardown op, which DSA calls on unregister and after a failed registration, in both cases before it frees the ports. Use disable_delayed_work_sync() there and in shutdown(): it drains a running poll as the cancel did and turns every later attempt to queue the work into a no-op, so the re-arm cannot bring the poll back. remove() and the probe error path only set WORK_STOPPED, which crc_err_work tests before it walks the ports.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: restore the hardware filters on open bcmgenet_hfb_init() runs INIT_LIST_HEACVE-2026-98304 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: restore the hardware filters on open bcmgenet_hfb_init() runs INIT_LIST_HEAD() on priv->rxnfc_list, which drops every rule off the list, and bcmgenet_open() calls it on each ifup. Every rule the user configured is silently lost: # ethtool -N eth0 flow-type ether dst $MAC action 0 Added rule with ID 0 # ethtool -n eth0 | grep -c Filter: 1 # ip link set eth0 down && ip link set eth0 up # ethtool -n eth0 | grep -c Filter: 0 Initialise the lists once at probe and restore the rules on open, as bcmgenet_resume() already does.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup When the forward outpCVE-2026-98303 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup When the forward output route cannot be used in icmp_route_lookup(), it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr, the original packet's source address. ip_route_input() only returns an error for truly invalid packets. For unreachable addresses it will succeed and return an input route whose dst.output is set to ip_rt_bug(). The existing check only rejects RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned and later used for output, syzkaller triggering a WARN_ON_ONCE() in ip_rt_bug() as bellow: ------------[ cut here ]------------ WARNING: net/ipv4/route.c:1273 at ip_rt_bug+0x14/0x20 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: ip_push_pending_frames+0xfa/0x100 __icmp_send+0x905/0xf10 ip_options_compile+0xc0/0xd0 ip_rcv_finish_core+0x321/0xae0 ip_rcv+0x1de/0x260 __netif_receive_skb_one_core+0x11a/0x130 netif_receive_skb+0x7b/0x260 tun_get_user+0x11bf/0x1c10 ------------[ cut here ]------------ Reject input route that is RTN_UNREACHABLE to fix it. The net warning is only pr

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: fddi: skfp: fix NULL deref when setting the MAC address while down skfp_ctl_set_mac_aCVE-2026-98302 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: fddi: skfp: fix NULL deref when setting the MAC address while down skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without checking netif_running(). ResetAdapter() first calls card_stop(), which sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(), which walks the two transmit queues: for (i = QUEUE_S; i <= QUEUE_A0; i++) { queue = smc->hw.fp.tx[i] ; ... t = queue->tx_curr_get ; smc->hw.fp.tx[] is only populated by init_tx(), which is reached from skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() -> init_mac() -> init_tx(). The private area is allocated and zeroed by alloc_fddidev(), so on an interface that has never been brought up both queue pointers are still NULL. The hw_state test at the top of mac_drv_clear_tx_queue() does not catch this, because card_stop() has just set STOPPED; the function proceeds into the loop and dereferences NULL. ResetAdapter() does call init_smt() itself, but only after the queues have been cleared. Setting the MAC address on a down interface therefore oopses: ip link set dev fddi0 address 02:00:00:00:00:01 BUG

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: move switchdev call outside rcu This is a follow-up of one of sashiko's CVE-2026-98301 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: bridge: mst: move switchdev call outside rcu This is a follow-up of one of sashiko's pre-existing bug reports. br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs while holding rcu_read_lock() which invokes the blocking switchdev notifier chain and may sleep. Nonzero MSTI changes come from netlink with rtnl held. Move the switchdev call before entering the rcu section and assert that rtnl is held. The call cannot be deferred because netlink needs its error and extack. Also DSA reads the old bridge MST state during the callback and checks it. A deferred callback will be late and will see the updated state.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv().CVE-2026-98300 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv(). tcp_v6_do_rcv() no longer calls skb_clone_and_charge_r() for TCP_LISTEN since commit 073d89808c06 ("net: fix data-races around sk->sk_forward_alloc"). However, there is still a small race window between tcp_v6_rcv() and tcp_v6_do_rcv(), where concurrent close() changes TCP_LISTEN to TCP_CLOSE, causing skb_clone_and_charge_r() to be called locklessly and resulting in the splat below. [0] Let's avoid calling skb_clone_and_charge_r() for TCP_CLOSE as well. This is fine for non-listeners because tcp_rcv_state_process() drops skb for TCP_CLOSE and opt_skb was freed immediately anyway. [0]: sk->sk_forward_alloc WARNING: net/ipv4/af_inet.c:162 at inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162, CPU#1: ksoftirqd/1/28 Modules linked in: CPU: 1 UID: 0 PID: 28 Comm: ksoftirqd/1 Not tainted 7.2.0 #17 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162 Code: 3d 49 ff e9 06 fd ff ff e8 d0 5b 83 f8 90 0f 0b 90 e9 35 fe ff

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: tcp: do not let tcp_rmem be set below 4096 We can hit a division by zero crash in tcp_rcvbCVE-2026-98299 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tcp: do not let tcp_rmem be set below 4096 We can hit a division by zero crash in tcp_rcvbuf_grow() and tcp_rcv_space_adjust(): divide error: 0000 [#1] PREEMPT SMP RIP: 0010:tcp_rcvbuf_grow+0x187/0x450 net/ipv4/tcp_input.c:939 ... grow = div_u64(((u64)rcvwin << 1) * (newval - oldval), oldval); The division uses oldval = tp->rcvq_space.space as divisor. When tp->rcvq_space.space is zero, this leads to a divide-by-zero exception. tp->rcvq_space.space is initialized in tcp_init_buffer_space(): tp->rcvq_space.space = min3(tp->rcv_ssthresh, tp->rcv_wnd, (u32)TCP_INIT_CWND * tp->advmss); If tcp_rmem[1] is configured to very small values (such as 1), sk->sk_rcvbuf is initialized to 1. Then tcp_full_space(sk), which computes (sk->sk_rcvbuf * scaling_ratio) >> 8, truncates to 0. This sets tp->window_clamp = 0, tp->rcv_ssthresh = 0, and tp->rcvq_space.space = 0. Later, when data arrives and DRS is invoked, tcp_rcvbuf_grow() divides by oldval == 0. Back in 2015, commit b1cb59cf2efe ("net: sysctl_net_core: check SNDBUF and RCVBUF for min length") ensured that net.core.rmem_default and

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg() In mmp_pdma_prep_slavCVE-2026-98298 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg() In mmp_pdma_prep_slave_sg(), for_each_sg() iterates the scatterlist putting each entry into 'sg', but the entry length is read from 'sgl' (the list head) instead of 'sg' (the current entry): for_each_sg(sgl, sg, sg_len, i) { addr = sg_dma_address(sg); avail = sg_dma_len(sgl); /* should be 'sg' */ Consequently 'avail' is always the length of the first entry. For multi-sg lists this causes out-of-bounds reads when a later entry is shorter than the first, and silent data loss when it is longer. Single-sg or uniformly-sized lists happen to mask the issue.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained hci_send_acl(), hci_seCVE-2026-98297 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix queuing tx_work after workqueue is drained hci_send_acl(), hci_send_sco() and hci_send_iso() queue hdev->tx_work unconditionally. They can run from the L2CAP/SCO/ISO socket send path while hci_dev_close_sync() is draining hdev->workqueue (HCIDEVDOWN racing with a socket write). Since that queue_work() is not chained work from the tx_work worker itself, __queue_work() sees the queue marked __WQ_DRAINING, warns "cannot queue %ps on wq %s", and drops the work: WARNING: CPU: 1 PID: 5985 at kernel/workqueue.c:2352 __queue_work Call Trace: queue_work_on l2cap_chan_send l2cap_sock_sendmsg ... hci_dev_close_sync() already sets HCI_CMD_DRAIN_WORKQUEUE before draining, but only hci_cmd_work() and handle_cmd_cnt_and_timer() check it before queuing. Route the tx_work producers through the same guard via a shared hci_sched_tx() helper.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate TX skb length in send_sync btintel_pcie_prepare_tx() copCVE-2026-98296 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate TX skb length in send_sync btintel_pcie_prepare_tx() copies skb->len bytes into a fixed BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy. Oversized packets are currently rejected only in btintel_pcie_send_frame(); any future caller of btintel_pcie_send_sync() would silently overflow the DMA buffer. Add the bounds check in btintel_pcie_send_sync() itself, right before skb_push() and the DMA copy.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: coredump: Quiesce dump work on unregister hci_devcd_handle_pkt_init() arms dumpCVE-2026-98295 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: coredump: Quiesce dump work on unregister hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers queue dump_rx without holding an hdev reference. Unregister leaves both works live, so disconnecting during an active dump lets them access hdev after hci_release_dev() frees it. Shut down coredump processing during unregister. Close the producer gate under dump_q.lock before disabling both works, then free the active buffer and queued packets under hci_dev_lock. Serializing the gate with enqueue prevents controller-specific workers from adding packets after the final purge.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Do not write to the serial port after it is closed hci_uart_close() clCVE-2026-98294 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Do not write to the serial port after it is closed hci_uart_close() closes the serdev port if HCI_QUIRK_NON_PERSISTENT_SETUP is set (for example, for the WCN399x family). A failed hci_dev_open_sync() following a successful qca_setup() calls hdev->close() but not hdev->shutdown(), so the port is closed while power->vregs_on is left true. qca_serdev_remove() then passes its power->vregs_on test and calls qca_power_off(), which writes to the closed port unconditionally. Seen on a WCN3988 by unbinding the driver after a controller failure. The trace below is from a 7.0.0 based kernel, where qca_power_off() was still named qca_power_shutdown(): Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 Call trace: tty_set_termios+0x50/0x238 (P) ttyport_set_baudrate+0x84/0xc0 serdev_device_set_baudrate+0x24/0x40 qca_power_shutdown+0x158/0x1fc [hci_uart] qca_serdev_remove+0x54/0x68 [hci_uart] serdev_drv_remove+0x1c/0x2c device_remove+0x4c/0x80 device_release_driver_internal+0x1cc/0x224 device_driver_detach+0x18/0x24 unbind_store+0xb4/0xc

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix parent socket leak in iso_conn_ready() iso_get_sock() returns the pareCVE-2026-98293 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix parent socket leak in iso_conn_ready() iso_get_sock() returns the parent socket with a reference held, which is dropped by sock_put() once the child socket has been set up. The error path taken when iso_sock_alloc() fails only calls release_sock() and returns, leaking the reference and thus the parent socket itself. Drop the reference on that path as well.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio, btmtkuart: validate WMT event length before struct access btmtksdio.CVE-2026-98292 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio, btmtkuart: validate WMT event length before struct access btmtksdio.c and btmtkuart.c cast a received WMT event straight to struct btmtk_hci_wmt_evt and read its op/flag fields without checking the event is long enough to contain them, unlike btmtk.c. The FUNC_CTRL case then further casts to struct btmtk_hci_wmt_evt_funcc and reads its 2-byte status field, again without a length check. Firmware that sends a short or malformed WMT event makes both drivers read past the end of the received SKB. Mirror btmtk.c: validate the base WMT header with skb_pull_data() before touching any of its fields, and when a FUNC_CTRL event turns out to be the short, header-only form (a plain enable/disable ack with no status word), decode the result from the header's own flag byte instead (0 = success, otherwise failure). Verified setup on MT7920, MT7921, MT7922 and MT7925: no regression.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix off-by-one bounds check in RX submit btintel_pcie_submit_rx()CVE-2026-98291 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix off-by-one bounds check in RX submit btintel_pcie_submit_rx() used frbd_index > rxq->count to guard the FRBD array access, allowing frbd_index == rxq->count to pass through and index one element past the end of the array. Change the check to >= rxq->count so every out-of-range index is rejected. This issue was reported by Claude Mythos.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid socket lock inversion in listener cleanup rfcomm_sock_cleanup_lisCVE-2026-98290 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: avoid socket lock inversion in listener cleanup rfcomm_sock_cleanup_listen() closes unaccepted child sockets through rfcomm_sock_close(), which takes the child socket lock before rfcomm_dlc_close() acquires rfcomm_mutex. The RFCOMM worker takes these locks in reverse order while handling connections and DLC state changes, so lockdep reports a possible deadlock. Close dequeued children without taking their socket lock. The accept queue owns a reference to each child, and bt_accept_dequeue() locks the child while unlinking it and clearing its parent pointer. Dropping the child lock makes it important to prevent a concurrent rfcomm_connect_ind() from enqueueing a new child after cleanup observes an empty queue. Set a listening socket to BT_CLOSED while its lock is still held, before dropping the lock and draining the queue. The state check in rfcomm_connect_ind() then rejects new children once cleanup starts.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: af_unix: Unify scc_index when finalising SCC in __unix_walk_scc().CVE-2026-98289 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: af_unix: Unify scc_index when finalising SCC in __unix_walk_scc(). Commit bfdb01283ee8 ("af_unix: Assign a unique index to SCC.") changed Tarjan's algorithm to update lowlink with lowlink, which is called lowpoint (unix_vertex.scc_index). unix_vertex_dead() assumes all vertices in an SCC share the same lowpoint, but this is not always true if an SCC has two or more back edges, depending on the order of DFS. For example, the graph below has two back edges from B to A and from C to B. A --> B --> C ^ | ^ | `----' `----' If DFS walks through A -> B -> C -> B (-> C -> B) -> A (-> B -> A), each index and scc_index will be updated as follows. A --> B --> C C = (3, 3) (index, scc_index) B = (2, 2) A = (1, 1) A ... B ... C C = (3, 2)<-. ^ | B = (2, 2) -' `----' A = (1, 1) A ... B ... C C = (3, 2) ^ | . . B = (2, 1)<-. `----' .... A = (1, 1) -' Then, unix_vertex_dead() thinks that B is passed to another SCC with scc_index 2, and the SCC is not garbage-collected. This does not happen if DFS walks in a dif

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TSO header length truncation stmmac_tso_xmit() stores the protocol headerCVE-2026-98288 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TSO header length truncation stmmac_tso_xmit() stores the protocol header length returned by stmmac_tso_header_size() in a u8. stmmac_tso_valid_packet() admits headers up to 1023 bytes, so a header longer than 255 bytes wraps modulo 256 (486 becomes 230, 256 becomes 0). A TCP over IPv6 socket carrying a few hundred bytes of sticky destination/hop-by-hop options makes skb_tcp_all_headers() exceed 255 while staying below the 1023-byte limit, so such an skb reaches stmmac_tso_xmit(). Widen proto_hdr_len to unsigned int, which is sufficient since the value is bounded by the hardware limit, and adjust the debug print specifier accordingly.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: pppoatm: ensure a writable skb header and linear data In pppoatm_send(), LLC encapsulationCVE-2026-98287 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: pppoatm: ensure a writable skb header and linear data In pppoatm_send(), LLC encapsulation checks whether there is sufficient headroom for the 4-byte LLC header, but does not ensure that the skb header is writable. Normal transmit packets passing through ppp_start_xmit() have their header unshared via skb_cow_head(). However, packets can also reach pppoatm_send() via PPP channel bridging (PPPIOCBRIDGECHAN) without going through ppp_start_xmit(). Use skb_cow_head() to ensure both sufficient headroom and a writable header before pushing the LLC header. While at it: - Call pskb_may_pull(skb, 1) before inspecting skb->data[0] to prevent out-of-bounds reads on zero-length or non-linear frames (e.g. from bridging). - Defer SC_COMP_PROT protocol compression until after pppoatm_may_send() succeeds. This eliminates the temporary skb allocation on admission failure and completely removes the fragile "undo" heuristic at the nospace label, avoiding any risk of reading uninitialized headroom or performing an unbalanced skb_push().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drop_monitor: use timer_shutdown_sync() to prevent timer rearming during teardown In drop_CVE-2026-98286 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drop_monitor: use timer_shutdown_sync() to prevent timer rearming during teardown In drop_monitor teardown paths (net_dm_trace_off_set(), net_dm_hw_monitor_stop(), and error unwind paths in net_dm_trace_on_set() and net_dm_hw_monitor_start()), per-CPU timers are stopped using timer_delete_sync() followed by cancel_work_sync(). However, there is a circular dependency between send_timer and dm_alert_work: 1) sched_send_work() (timer callback) schedules dm_alert_work. 2) send_dm_alert() / net_dm_hw_summary_work() calls reset_per_cpu_data() or net_dm_hw_reset_per_cpu_data(). 3) If memory allocation fails under memory pressure in the reset function, it re-arms the timer via mod_timer(&data->send_timer, ...). If dm_alert_work is running concurrently while timer_delete_sync() executes on another CPU, an allocation failure in the worker will re-arm the timer after timer_delete_sync() has already returned. Once cancel_work_sync() completes and module_put() is called, the timer remains active in the timer wheel. If the module is then unloaded, the timer will fire and execute sched_send_work() in freed memory, trigg

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: bridge: vlan: fix bugs caused by switchdev deletion errors Allowing switchdev to prevCVE-2026-98285 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: bridge: vlan: fix bugs caused by switchdev deletion errors Allowing switchdev to prevent vlan deletion and error out in __vlan_del could cause multiple different issues - inconsistent state, memory leaks when flushing, NULL pointer dereference on bridge error when flushing. It doesn't make sense to allow it to stop __vlan_del, so log the error and continue with software vlan deletion. This is also consistent with 8021q behaviour.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: netlink: do not free nlk->groups while lockless readers can use it netlink_realloc_groups(CVE-2026-98284 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: netlink: do not free nlk->groups while lockless readers can use it netlink_realloc_groups() uses krealloc() under netlink_table_grab(). Whenever NLGRPSZ(groups) lands in a different kmalloc bucket, the old bitmap is freed immediately. Two readers of nlk->groups / nlk->ngroups do not hold the netlink table lock: 1) sk_diag_dump_groups(). Hashed (bound) sockets are dumped from the rhashtable walk in __netlink_diag_dump(), which only holds RCU. Only the mc_list part of the dump takes nl_table_lock. 2) netlink_native_seq_show() (/proc/net/netlink), whose walk has been lockless since commit 21e4902aea80 ("netlink: Lockless lookup with RCU grace period in socket release"). Both can read a freed buffer, and sk_diag_dump_groups() can also read past the end of the old (smaller) buffer if it happens to load the old @groups pointer together with the new @ngroups value, copying the result into a NETLINK_DIAG_GROUPS attribute. This is the same class of bug that commit f773608026ee ("netlink: access nlk groups safely in netlink bind and getname") fixed for bind() and getname(); these two readers were missed. S

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix use-after-free in kvmhv_emulate_tlbie_all_lpid() kvmhv_emulate_tlCVE-2026-98283 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: KVM: PPC: Book3S HV: fix use-after-free in kvmhv_emulate_tlbie_all_lpid() kvmhv_emulate_tlbie_all_lpid() iterates the nested-guest IDR and drops mmu_lock before calling kvmhv_emulate_tlbie_lpid(), but does not hold a reference on the kvm_nested_guest pointer obtained from the IDR. A concurrent vCPU issuing a single-LPID tlbie (is=2, ric=2) can race through kvmhv_flush_nested() -> kvmhv_remove_nested() -> idr_remove / --refcnt -> kvmhv_release_nested() -> kfree(gp) in that window, leaving the iterating vCPU with a dangling pointer. The subsequent mutex_lock(&gp->tlb_lock) and accesses to gp->shadow_pgtable, gp->shadow_lpid and gp->l1_host all touch freed memory. The free path is fully L1-controlled. Fix this by incrementing gp->refcnt inside the loop before dropping mmu_lock, mirroring what kvmhv_get_nested() does, and releasing the reference with kvmhv_put_nested() after the per-guest work completes. This is the same get/put discipline already used at every other call site that drops mmu_lock while holding a nested-guest pointer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba The commit b1af23d836f8CVE-2026-98282 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: powerpc/iommu: Fix the overflow validation in iommu_tce_check_ioba The commit b1af23d836f8 ("KVM: PPC: iommu: Unify TCE checking") unified IOBA parameter checking across KVM and VFIO into iommu_tce_check_ioba(). While doing so, the passed in argument npages is ignored and constant value '1' is used leaving out a possible overflow as the callers can legitimately be using npages > 1 for H_STUFF_TCE or H_PUT_TCE_INDIRECT cases. Fix this by accounting for 'npages', checking for arithmetic overflow, and verifying that the entire requested range (ioba - offset + npages) does not exceed the table capacity 'size'.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: futex: Also allocate private hash on vfork() As Jann demonstrated, it is entirely feasibleCVE-2026-98281 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: futex: Also allocate private hash on vfork() As Jann demonstrated, it is entirely feasible to access the mm through vfork(). Therefore we need to allocate a private hash on vfork() as well as any other CLONE_VM user. Specifically, it must be avoided to have (private) futex waiters before allocating the private hash.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/xe/i2c: Disable IRQ on unbind Currently, struct xe_i2c is freed before SGUnit IRQ is dCVE-2026-98280 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/xe/i2c: Disable IRQ on unbind Currently, struct xe_i2c is freed before SGUnit IRQ is disabled in unbind path, leaving a potential UAF in case I2C IRQ is hit during this small window. Explicitly disable I2C IRQ in xe_i2c_remove() and fix this. (cherry picked from commit 8ba5c8b8ab3fd362267c11df2cd5a90ee46f6e24)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: handle lack of space when cleaning up verity items When enable_verity() hits the qgCVE-2026-98279 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: btrfs: handle lack of space when cleaning up verity items When enable_verity() hits the qgroup limit, rollback_verity() needs its own metadata reservation. When the qgroup limit or lack of space refuses the rollback, the whole filesystem is forced read-only even though the qgroup limit was for one subvolume only. Also orphan cleanup at the next mount fails the same way, so the leftover items are never removed: with -EDQUOT the subvolume stays unreachable, and with -ENOSPC on a full filesystem the next read-write mount fails. Start transactions with btrfs_start_transaction_fallback_global_rsv() in btrfs_orphan_cleanup(), drop_verity_items() and rollback_verity(). Those calls only delete items and free the space in the end, so they may use the global reserve and skip the qgroup limit, which avoids -ENOSPC and -EDQUOT.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: remove WARN_ON_ONCE() from the dev_fill_forward_path() loop check ipip_fill_forward_pCVE-2026-98278 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: remove WARN_ON_ONCE() from the dev_fill_forward_path() loop check ipip_fill_forward_path() and ip6_tnl_fill_forward_path() look up the route to the tunnel's remote endpoint and set ctx->dev to its device, which is the tunnel itself when that route resolves back to the tunnel. dev_fill_forward_path() then makes no progress and trips WARN_ON_ONCE(last_dev == ctx->dev) as soon as a flowtable tries to offload a flow through the tunnel. That routing loop is a configuration any CAP_NET_ADMIN user can set up, and ip_tunnel_xmit() and ip6_tnl_xmit() already treat it as a tx error, so remove the warning and just fail the walk, as commit 008e7a7c293b ("net: remove WARN_ON_ONCE when accessing forward path array") did for the path stack overflow.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: ring the doorbell if a burst ends in a drop fbnic_tx_map() skips the doorbell CVE-2026-98277 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: ring the doorbell if a burst ends in a drop fbnic_tx_map() skips the doorbell write, and the completion request, for every packet handed to it with xmit_more set, counting on the packet which ends the burst to publish them all. When that packet is dropped instead - skb_put_padto(), skb_cow_head() or a DMA mapping failure - nothing rings. The descriptors of the preceding packets stay invisible to the HW until the next transmit on that queue, which for a burst-then-idle workload may never come. Remember the meta descriptor of the last packet left without a doorbell and flush it from the error paths. The completion request has to be set on that descriptor rather than simply writing the tail, otherwise the HW would transmit the packets but never report a head, and the ring would fill up and stall for good. This is very similar to Joe's recent series of fixes for bnxt. Not seen in real life, reproduced under QEMU with failure injection.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: lock the socket in sock_gettstamp() sk->sk_flags must only be changed while holding tCVE-2026-98276 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net: lock the socket in sock_gettstamp() sk->sk_flags must only be changed while holding the socket lock, because sock_set_flag() and sock_reset_flag() use non atomic operations (__set_bit() and __clear_bit()). sock_gettstamp() is one of the last places where a bit of sk->sk_flags is changed from a syscall without owning the socket lock, through sock_enable_timestamp(sk, SOCK_TIMESTAMP). sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp, sunrpc, wireguard) need a careful audit, this will be addressed in a separate patch. Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind() can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set, because both threads perform a read-modify-write on the same word. CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW) -------------------------------- ---------------------------- read sk_flags = F read sk_flags = F compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMEST

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Ack RX overrun interrupt correctly The RX overrun interrupt is repCVE-2026-98275 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Ack RX overrun interrupt correctly The RX overrun interrupt is reported in interrupt status register 4, but gmac_irq() acknowledges it using the RX descriptor error bit from status register 0. For GMAC0 this writes the GMAC1 overrun bit, while for GMAC1 the shift leaves no bit in the 32-bit register. Acknowledge the same per-port RX overrun bit that was detected.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: psp: avoid conflicts with skb->decrypted and sk_validate_xmit_skb() PSP conflicts witCVE-2026-98274 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: psp: avoid conflicts with skb->decrypted and sk_validate_xmit_skb() PSP conflicts with TLS ULP in its usage of both skb->decrypted and sk->sk_validate_xmit_skb(). Make PSP mutually exclusive with TLS ULP, the only other user of either of these. As other users of skb->decrypted come along, they can be added to sk_has_decrypt_user(). It would make sense to also assert that sk->sk_validate_xmit_skb() is also NULL in both of these setup paths for similar future proofing, but the PSP listener/sk_clone() path is still broken and it could be seen as a regression to not allow rx assoc to run on a child of a listener socket with PSP tx assoc state. Include all TCP ULPs in the sk_has_decrypt_user() check, even though TLS is the only one that conflicts with PSP via the decrypted bit. This is intentional because PSP was not designed to be used with ULPs. It is best to close off surface area that may make bugs reachable, until someone wishes to design and test an actual user of PSP with ULPs.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL CVE-2026-98273 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: x86/kprobes: Fix crash when probing CS CALL instructions When using eBPF to probe CS CALL instructions within a function, a crash can be triggered. The eBPF tool probes offset 257 of the __hrtimer_run_queues() function: <__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1) <__hrtimer_run_queues+254>: mov %r14,%rdi <__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12> <__hrtimer_run_queues+263>: mov %eax,%r12d <__hrtimer_run_queues+266>: xchg %ax,%ax <__hrtimer_run_queues+268>: mov %r13,%rdi Which triggers this crash: BUG: unable to handle page fault for address: 00000000000f41c9 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP NOPTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P RIP: 0010:__hrtimer_run_queues+0x106/0x230 Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is at the 6th byte of the above CS CALL instruction. Since the CS CALL instruction occupies 6 bytes, the exception occurred in the middle of that call instruction. The root cause is that when using eBPF to

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: prevent buffer overflow in page_pool allocation The per‑processor buffering scCVE-2026-98272 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: prevent buffer overflow in page_pool allocation The per‑processor buffering scheme is supported only if the number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS (8). This is already checked in mvpp2_probe() during the initial activation of percpu_pools. However, mvpp2_change_mtu() may later call mvpp2_bm_switch_buffers(priv, true) without this check, which can lead to an out-of-bounds access in the priv->page_pool array in mvpp2_bm_init(). The array is sized to hold MVPP2_PORT_MAX_RXQ entries, and mvpp2_get_nrxqs() may return exactly that value. The per-CPU scheme then doubles it to nrxqs * 2, exceeding the array bounds. Check that the hardware version is MVPP22 or newer and that the number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS before switching to per-CPU mode. Found by Linux Verification Center (linuxtesting.org) with SVACE.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: skbuff: do not leave stale header offsets after pskb_carve() pskb_carve_inside_headerCVE-2026-98271 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: skbuff: do not leave stale header offsets after pskb_carve() pskb_carve_inside_header() and pskb_carve_inside_nonlinear() remove the first bytes of a packet and reallocate skb->head. All the headers that were present before the operation are gone, but both functions call skb_headers_offset_update(skb, 0), which is a no-op : skb->mac_header, skb->network_header, skb->transport_header and skb->csum_start keep their old values and now describe bytes which are no longer there. Both helpers size the new head from the old skb_end_offset(), so the stale offsets still land inside the new allocation. They point past skb_tail_pointer() though, to bytes that were never initialized. pskb_carve_inside_nonlinear() is the worst case, because it leaves a zombie skb with an empty linear part (skb->data == skb_tail_pointer(skb), skb_headlen(skb) == 0), while skb_mac_header_was_set() is still true and skb->mac_header is way ahead of skb->data. The only user of pskb_extract() is rds_tcp_data_recv(), and the carved skb is queued on tinc->ti_skb_list. When the RDS incoming message is released, rds_tcp_inc_free() calls skb_que

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check ras and obj before dereference nbio_v7_9_handle_ras_controller_intr_no_bCVE-2026-98270 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check ras and obj before dereference nbio_v7_9_handle_ras_controller_intr_no_bifring() dereferences ras and obj without checking either for NULL. Both amdgpu_ras_get_context() and amdgpu_ras_find_obj() can return NULL, e.g. during the window between adev->nbio.ras being set (early in amdgpu_ras_init(), by design, to enable the fatal-error interrupt as soon as possible) and the PCIE_BIF ras object actually being created in RAS late_init. Any interrupt in that window crashes in hard-IRQ context. This is analogous to commit d190b459b2a4 ("drm/amdgpu: the warning dereferencing obj for nbio_v7_4"), which fixed the same issue in the nbio_v7_4 handler. Found by Linux Verification Center (linuxtesting.org) with SVACE. (cherry picked from commit c7071767a50a32ed727cf800ac84372429e3b4b3)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: abort transaction on failure to update inode for hole punching and reflinking If weCVE-2026-98269 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: btrfs: abort transaction on failure to update inode for hole punching and reflinking If we fail to update the inode we error out without aborting the transaction, which can result in a persistent inconsistency if after the failure the transaction is committed, as we have dropped file extent items from a range and either punched a hole or insert a new file extent item for that range (for reflinks). So add the missing transaction abort.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: perf: Fix null pointer access in is_include_guest_event() A typical module unload occurrinCVE-2026-98268 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: perf: Fix null pointer access in is_include_guest_event() A typical module unload occurring event when there is an active perf connection leads to freeing of the pmu pointer. The call log is something like: .. __pmu_detach_event pmu_detach_event pmu_detach_events perf_pmu_unregister .. __pmu_detach_event() sets event->pmu to null. When the perf connection finally is closed, the following stack trace is observed: Oops: general protection fault, kernel NULL pointer dereference ... RIP: 0010:_free_event+0x3e/0x370 ... Call Trace: ... perf_event_release_kernel+0x260/0x2d0 perf_release+0x12/0x20 A call to mediated_pmu_unaccount_event() inside _free_event() is the root cause of this crash. Adding a check inside is_include_guest_event() ensures we don't accidentally access a null pmu ptr. In addition to this, we will now call mediated_pmu_unaccount_event() before clearing the pmu ptr so that nr_include_guest_events counts are maintained correctly.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.