Vulnerability database

13,801 results · page 18 of 277

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: zram: set default primary compressor in zram_destroy_comps() Patch series "zram: fix zram CVE-2026-89717 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: zram: set default primary compressor in zram_destroy_comps() Patch series "zram: fix zram issues reported by sashiko". Sashiko drove by and reported [1] a couple of zram issues: a possible BUG_ON() in zlib code due to missing winbits range validation and one possible NULL-ptr dereference in zcomp. Both are low risk yet still worth fixing. This patch (of 2): zram_destroy_comps() resets all compressors and leaves them set to NULL, including the primary one, which is invalid device state, as now comp_algorithm_show()->strcmp() can be called on a NULL compressor. Set default primary compressor in zram_destroy_comps().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails nfs4_server_commCVE-2026-89714 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails nfs4_server_common_setup() allocates server->delegation_hash_table first, but server->destroy - the only path that frees the table via nfs4_destroy_server() - is not assigned until the very end of the function. If any intermediate step fails (the is_ds_only_client() check, nfs4_init_session(), nfs4_get_rootfh(), or nfs_probe_server()), the function returns with server->destroy still NULL, so the caller's nfs_free_server() skips the destroy callback and the hash table is leaked (4 KiB per attempt with the default delegation watermark). This is trivially reachable from userspace: every failed NFSv4 mount leaks one allocation. A client that persistently retries a mount that cannot succeed leaks kernel memory without bound. Observed in production where a Longhorn backup poller retried mount.nfs4 against an NFSv3-only server roughly 10 times per second, leaking ~3.4 GiB of unreclaimable slab (kmalloc-rnd-13-4k) per day; the node accumulated 12 GiB of leaked slab before the source was identified via the kmem:kmalloc tracepoint (call_site=nfs4_de

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: check truncate permission under inode lock nfsd_setattr() checks whether a size updaCVE-2026-89713 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: NFSD: check truncate permission under inode lock nfsd_setattr() checks whether a size update needs NFSD_MAY_TRUNC before it takes inode_lock(). The comparison uses the file size sampled by that unlocked read, but the actual ATTR_SIZE update is applied later under inode_lock() by notify_change(). This leaves a TOCTOU window for append-only files. If a client sends a SETATTR that does not shrink the file at the time of the unlocked sample, a concurrent append can extend the file before nfsd_setattr() takes inode_lock(). notify_change() then applies a real truncation without the NFSD_MAY_TRUNC check that rejects IS_APPEND(inode). The VFS truncate syscall paths perform their own append-only checks before calling notify_change(), so NFSD must make this decision against the locked size it is about to change. Split the write-count acquisition from the truncation permission check. Keep get_write_access() before the locked setattr work, then recheck whether the requested size is below i_size_read(inode) after inode_lock() has been acquired and before notify_change(ATTR_SIZE). This also avoids the plain unlocked inode->i

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: Reset write verifier when async COPY writeback fails Async COPY captures nn->writeveCVE-2026-89706 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: nfsd: Reset write verifier when async COPY writeback fails Async COPY captures nn->writeverf at request time and reports it to the client via CB_OFFLOAD after the worker kthread completes. When the post-copy vfs_fsync_range() or filemap_check_wb_err() in _nfsd_copy_file_range() reports an error, the worker correctly leaves NFSD4_COPY_F_COMMITTED clear so that CB_OFFLOAD encodes wr_stable_how as NFS_UNSTABLE, but the server's write verifier is not rotated. A client that receives NFS_UNSTABLE in CB_OFFLOAD follows up with COMMIT to make the copied data durable. With the verifier unchanged, COMMIT returns the same value the client just received via CB_OFFLOAD, and the client concludes the copy is durable -- silently dropping the data whose writeback in fact failed. This violates the UNSTABLE+COMMIT durability contract (RFC 7862 section 15.1, RFC 8881 section 18.32) and matches the bug just fixed in nfsd_vfs_write() and nfsd_commit(). Rotate nn->writeverf at the writeback-failure site. The async COPY worker has no svc_rqst, so commit_reset_write_verifier() is not available here; calling nfsd_reset_write_verifier()

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: set SC_STATUS_FREED in nfsd4_drop_revoked_stid for delegations nfsd4_drop_revoked_stCVE-2026-89703 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: nfsd: set SC_STATUS_FREED in nfsd4_drop_revoked_stid for delegations nfsd4_drop_revoked_stid() handles FREE_STATEID for admin-revoked delegations but does not set SC_STATUS_FREED before releasing cl_lock. revoke_delegation() uses this flag to detect whether FREE_STATEID has already processed the delegation -- without it, the freed delegation is added to cl_revoked via list_add(), producing a use-after-free when cl_revoked is later traversed in __destroy_client(). The SC_STATUS_REVOKED path in nfsd4_free_stateid() (line 7983) already sets SC_STATUS_FREED correctly. Apply the same pattern to the SC_STATUS_ADMIN_REVOKED path in nfsd4_drop_revoked_stid().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: validate sockaddr length per family in listener_set nfsd_sock_nl_policy declares NFSCVE-2026-89700 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: nfsd: validate sockaddr length per family in listener_set nfsd_sock_nl_policy declares NFSD_A_SOCK_ADDR as a bare NLA_BINARY attribute with no minimum length. A CAP_NET_ADMIN caller can send a 16-byte NFSD_A_SOCK_ADDR with sa_family=AF_INET6, causing a 12-byte OOB read across three consumers (rpc_cmp_addr_port, svc_find_listener, kernel_bind). nfsd_nl_listener_set_doit() also parsed and validated each listener entry inline in two separate loops, interleaved with mutating the running listener configuration. The validation was duplicated, used an open-coded "nla_len < sizeof(struct sockaddr)" check that was too short for AF_INET6, and handled a malformed entry inconsistently depending on which loop noticed it. Add an nfsd_nl_validate_listeners() helper that walks the entire list once and confirms each entry parses, carries both an address and a transport name, and is long enough for its address family (sizeof(struct sockaddr_in) for AF_INET, sizeof(struct sockaddr_in6) for AF_INET6, -EAFNOSUPPORT otherwise). Call it before taking nfsd_mutex or creating the serv, so a malformed request fails cleanly with no side e

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: add fh_want_write() for early-verified SETATTR in nfsd_proc_setattr() The BOTH_TIME_CVE-2026-89697 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: nfsd: add fh_want_write() for early-verified SETATTR in nfsd_proc_setattr() The BOTH_TIME_SET branch calls fh_verify() early so setattr_prepare() can inspect the dentry. This causes nfsd_setattr() to skip fh_want_write(), so notify_change() runs without a mount write reference. Add the missing fh_want_write() call after the early fh_verify().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: clear CALLBACK_RUNNING on failed delegation recall queue nfsd_break_one_deleg() setsCVE-2026-89692 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: nfsd: clear CALLBACK_RUNNING on failed delegation recall queue nfsd_break_one_deleg() sets NFSD4_CALLBACK_RUNNING via test_and_set_bit at entry to serialize recall work, then calls nfsd4_run_cb() to queue the recall. When the queue attempt fails the refcount bump is undone, but the RUNNING bit is left set. The only site that clears the bit is nfsd41_destroy_cb() (fs/nfsd/nfs4callback.c), which runs from the workqueue and is therefore unreachable when nothing was queued. The bit becomes a permanent latch on dp->dl_recall.cb_flags: every subsequent break_lease() on the same delegation hits the early-return guard in nfsd_break_one_deleg() and silently skips the recall, so the delegation is never broken and the conflicting open or lock stalls. Fix by clearing NFSD4_CALLBACK_RUNNING on the !queued branch alongside the refcount_dec.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: fix dentry ref leak on V4ROOT export filehandle lookup nfsd_set_fh_dentry() leaks thCVE-2026-89683 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: nfsd: fix dentry ref leak on V4ROOT export filehandle lookup nfsd_set_fh_dentry() leaks the dentry reference from exportfs_decode_fh_raw() when the NFS3_FHSIZE or NFS_FHSIZE switch cases detect NFSEXP_V4ROOT and goto out. The out: label calls exp_put() but never dput(dentry), and fhp->fh_dentry was never assigned so fh_put() cannot compensate. A crafted NFSv3 filehandle targeting a V4ROOT export's fsid triggers the leak on every request.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfsd_file leak on inter-server COPY setup failure When nfsd4_setup_inter_ssc() fCVE-2026-89680 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfsd_file leak on inter-server COPY setup failure When nfsd4_setup_inter_ssc() fails, nfsd4_copy() returns nfserr_offload_denied directly, bypassing the out: label where release_copy_files() would drop the nf_dst reference taken by nfs4_preprocess_stateid_op(). Each failed inter-server COPY leaks one nfsd_file, pinning file/inode/dentry/vfsmount. Fix by setting status and jumping to out: instead of returning directly.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: fix null dereference in nfsd4_setattr for deleg timestamp attrs When a SETATTR requeCVE-2026-89679 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: nfsd: fix null dereference in nfsd4_setattr for deleg timestamp attrs When a SETATTR request includes FATTR4_WORD2_TIME_DELEG_ACCESS or FATTR4_WORD2_TIME_DELEG_MODIFY in the attribute bitmap, nfsd4_setattr() sets deleg_attrs=true and calls nfs4_preprocess_stateid_op() to validate the stateid. If the client supplies the NFSv4 "one stateid" (all-0xFF bytes), check_special_stateids() returns nfs_ok without populating the output nfs4_stid pointer, because the special-stateid path in nfs4_preprocess_stateid_op() jumps to done: with s==NULL, and the "if (s)" block that would set *cstid is skipped. The local variable `st` remains NULL. Back in nfsd4_setattr(), the if (deleg_attrs) block then unconditionally dereferences st->sc_type (at offset 4 from NULL), causing a kernel oops. This is remotely triggerable by any NFSv4 client: send COMPOUND [PUTROOTFH, SETATTR(ONE_STATEID, {bmval2=FATTR4_WORD2_TIME_DELEG_ACCESS, ...})]. No authentication, delegation, or prior state is required. Fix by adding a NULL check before the dereference. A special stateid is not a delegation stateid, so the existing nfserr_bad_stateid return

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: gate nfs2 setacl by argp->mask The NFSACL v2 SETACL path shares the decoder conventiCVE-2026-89672 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: nfsd: gate nfs2 setacl by argp->mask The NFSACL v2 SETACL path shares the decoder convention used by its v3 sibling: nfsaclsvc_decode_setaclargs() fills in argp->acl_access only when NFS_ACL is set in the request mask and argp->acl_default only when NFS_DFACL is set, leaving the other pointer NULL because the argument buffer is zeroed up to pc_argzero before decode. nfsacld_proc_setacl() then hands both pointers to set_posix_acl() unconditionally. set_posix_acl(idmap, dentry, type, NULL) is the VFS "remove this ACL type" operation, so an omitted arm is indistinguishable from an explicit request to delete that ACL. A SETACL carrying only NFS_ACL silently strips the directory's default ACL; mask=0 strips both. This is the same defect just fixed in nfsd3_proc_setacl(); apply the same remedy. Gate each set_posix_acl() call on its mask bit and initialize error to 0 so that a request with neither bit set leaves the on-disk ACLs untouched and returns success. The out_drop_lock path and the unconditional posix_acl_release() in nfsaclsvc_release_setacl() already tolerate the skipped arms.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: gate nfs3 setacl by argp->mask nfsd3_proc_setacl() calls set_posix_acl() unconditionCVE-2026-89671 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: nfsd: gate nfs3 setacl by argp->mask nfsd3_proc_setacl() calls set_posix_acl() unconditionally for both ACL_TYPE_ACCESS and ACL_TYPE_DEFAULT, passing argp->acl_access and argp->acl_default verbatim. The NFSv3 ACL decoder only populates those pointers when the corresponding mask bit is set: nfs3svc_decode_setaclargs() if (args->mask & NFS_ACL) decode into acl_access if (args->mask & NFS_DFACL) decode into acl_default /* otherwise the pointer stays NULL (pc_argzero) */ nfsd3_proc_setacl() set_posix_acl(.., ACL_TYPE_ACCESS, argp->acl_access) set_posix_acl(.., ACL_TYPE_DEFAULT, argp->acl_default) set_posix_acl(idmap, dentry, type, NULL) is the VFS "remove this ACL type" operation. A NULL pointer that means "the client did not send this arm" is therefore indistinguishable from "the client asked to remove this ACL". A SETACL with mask=NFS_ACL silently drops the directory's default ACL; mask=0 drops both. The sibling nfsd3_proc_getacl() already consults argp->mask before touching each arm; mirror that in setacl. Fix by wrapping each set_posix_acl() call in the matching mas

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: reject out-of-range nseconds in NFSv3 SETATTR and create ops A client can send an NFCVE-2026-89666 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: nfsd: reject out-of-range nseconds in NFSv3 SETATTR and create ops A client can send an NFSv3 SETATTR, CREATE, MKDIR, SYMLINK or MKNOD carrying an atime or mtime whose nseconds field is out of range. The value is well-formed on the wire and decodes cleanly into a valid uint32, but it is not a valid timespec64: tv_nsec must be less than NSEC_PER_SEC. Nothing in the setattr path clamps it. notify_change() runs the time through timestamp_truncate(), which does not reduce tv_nsec below NSEC_PER_SEC when the filesystem supports nanosecond granularity (s_time_gran == 1), and the inode atime/mtime setters store it verbatim (only ctime is normalized, via inode_set_ctime_to_ts()). The un-normalized value then corrupts on-disk metadata: ext4's ext4_encode_extra_time() shifts tv_nsec left by EXT4_EPOCH_BITS, which overflows the 32-bit extra field and clobbers the seconds-epoch bits, so the stored seconds (and thus the year) are wrong on read-back. XFS with bigtime mis-stores the timestamp for the same reason. Validate the client-supplied atime/mtime in the proc handlers and return NFS3ERR_INVAL before anything is changed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: reject out-of-range useconds in NFSv2 SETATTR/CREATE The NFSv2 sattr decoder convertCVE-2026-89665 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.2

  In the Linux kernel, the following vulnerability has been resolved: nfsd: reject out-of-range useconds in NFSv2 SETATTR/CREATE The NFSv2 sattr decoder converts the wire useconds to nanoseconds in svcxdr_decode_sattr(): iap->ia_atime.tv_nsec = tmp2 * NSEC_PER_USEC; tmp2 is a u32 and NSEC_PER_USEC is 1000, so the product is computed in unsigned long. On ILP32 that is 32 bits, and an out-of-range useconds value such as 4294968 wraps to tv_nsec == 704. The corruption therefore happens during decode, before any proc function can inspect the value, and a later range check on tv_nsec would see an in-range result and accept it. Rejecting in the decoder yields an RPC GARBAGE_ARGS reply. NFSv2 defines no NFSERR_INVAL, so there is no NFS-level status to return for a malformed time argument, and the check cannot move to the proc function the way the v3/v4 nsec range checks do. Guard the raw useconds before the multiplication and reject values greater than 1000000. useconds == 1000000 is kept: it is the Sun convention for "set to the current server time", and the in-tree Linux NFSv2 client emits it in both the atime and the mtime field for a plain touch / utimes(file, NULL) (see encode_sa

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: cifs: call pagecache_isize_extended() in cifs_setsize() when extending cifs_setsize() callCVE-2026-89642 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: cifs: call pagecache_isize_extended() in cifs_setsize() when extending cifs_setsize() calls truncate_pagecache() but skips pagecache_isize_extended() on extension. truncate_setsize() shows the correct pattern: i_size_write(inode, newsize); if (newsize > oldsize) pagecache_isize_extended(inode, oldsize, newsize); truncate_pagecache(inode, newsize); pagecache_isize_extended() zeroes the tail of the page straddling old EOF. Without it, dirty bytes in that region can be written back to the server, exposing stale data in the newly extended range.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: cifs: clear tcon after cifsFileInfo_put() in cifs_file_set_size() When the else branch of CVE-2026-89641 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: cifs: clear tcon after cifsFileInfo_put() in cifs_file_set_size() When the else branch of cifs_file_set_size() finds a writable file handle via find_writable_file(), it borrows tcon and server from the handle's tlink, attempts the handle-based set_file_size() RPC, and then releases the handle with cifsFileInfo_put(). If set_file_size() fails, execution falls through to the path-based fallback, which reuses the borrowed tcon and server under the "if (tcon == NULL)" guard. Since tcon is not NULL at that point, the guard is skipped. If cifsFileInfo_put() dropped the last reference on a tlink that was already removed from the tlink tree (TCON_LINK_IN_TREE cleared, as happens during reconnection or session teardown), cifs_put_tlink() will have freed tcon; the subsequent set_path_size() call is then a use-after-free. Setting tcon = NULL after cifsFileInfo_put() causes the existing guard to take the cifs_sb_tlink() path, which acquires a fresh reference for the path-based operation or fails cleanly if the session is gone.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions WhCVE-2026-89638 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions When a file has the setuid or setgid bit set and is written to, the VFS strips those bits and issues a setattr with ATTR_KILL_SUID/ATTR_KILL_SGID together with an ATTR_MODE carrying the already-cleared mode. Both cifs_setattr_unix() and cifs_setattr_nounix() unconditionally dropped ATTR_MODE in that case: /* skip mode change if it's just for clearing setuid/setgid */ if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID)) attrs->ia_valid &= ~ATTR_MODE; This is fine for the default mount, where the mode is only emulated via the DOS read-only attribute and cannot represent the setuid/setgid bits anyway. However, with the "cifsacl" or "modefromsid" mount options the mode is stored on the server through an ACL (id_mode_to_cifs_acl()), with the SMB3.1.1 POSIX extensions the mode is sent to the server directly, and with the SMB1 Unix extensions (cifs_setattr_unix) the mode is sent via CIFSSMBUnixSetPathInfo(). In all those cases dropping ATTR_MODE means the cleared mode is never pushed to the server, so the setuid/setgid bit

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() coalesce_t2()CVE-2026-89633 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() coalesce_t2() computes data pointers directly from server-supplied DataOffset fields with no validation against buffer bounds: data_area_of_tgt = (char *)&pSMBt->hdr.Protocol + get_unaligned_le16(&pSMBt->t2_rsp.DataOffset); data_area_of_src = (char *)&pSMBs->hdr.Protocol + get_unaligned_le16(&pSMBs->t2_rsp.DataOffset); data_area_of_tgt += total_in_tgt; ... memcpy(data_area_of_tgt, data_area_of_src, total_in_src); A small DataOffset can push a pointer below the actual byte area, overwriting header fields; a large one can push it past the buffer end, causing out-of-bounds heap reads (source) or writes (target). The BCC overflow guard does not prevent this: BCC reflects how much data is present, while DataOffset controls where in the buffer it starts. The "validate target area" comment present since the function was first written in 2005 was a placeholder that was never implemented. Add lower- and upper-bound checks for both data pointers before the memcpy, and before any target header

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: restore the data_offset bound in is_valid_oplock_break() Commit 83bfbd0bb902 CVE-2026-89630 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: smb: client: restore the data_offset bound in is_valid_oplock_break() Commit 83bfbd0bb902 ("cifs: Remove the RFC1002 header from smb_hdr") changed the quantity this bound is measured against. It used to be srv->total_read minus the 4-byte RFC1002 preamble that total_read then included, so it was the SMB message length. The same commit stopped counting the preamble, and the mechanical substitution to srv->total_read - srv->pdu_size left an expression that is identically zero: standard_receive3() reads MID_HEADER_SIZE() bytes and then exactly pdu_length - MID_HEADER_SIZE() more, adding both to total_read. len is therefore 0, the subtraction below it wraps, and no __u32 DataOffset can exceed the result, so the check from commit 097f5863b1a0 ("cifs: read overflow in is_valid_oplock_break()") no longer rejects anything. Use total_read, which is now the message length on its own.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs: validate non-resident attribute offsets ntfs_attr_update_meta() shifts the attributeCVE-2026-89611 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: ntfs: validate non-resident attribute offsets ntfs_attr_update_meta() shifts the attribute name when converting between non-sparse and sparse attributes. Converting to sparse also adds the compressed_size field before the name and mapping pairs, requiring eight additional bytes in the attribute record. However, the validator does not check that name_offset is within safe boundaries for these operations or that the additional space is available. A malicious MFT record could set name_offset such that: 1. The name is positioned at the very end of a non-sparse attribute. Converting to sparse would shift the name forward by 8 bytes, writing beyond the attribute boundary. 2. The name overlaps with the mapping pairs, causing corruption during conversion. Add validation to ensure: - For named attributes, name_offset is within valid bounds - Name does not extend beyond the attribute or overlap with mapping pairs - For non-sparse, non-compressed attributes, eight bytes are available after mapping_pairs_offset for the compressed_size field The space check also covers unnamed attributes, for which name_offset

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ecryptfs: pass packet set buffer size to parser ecryptfs_parse_packet_set() receives a poiCVE-2026-89608 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: ecryptfs: pass packet set buffer size to parser ecryptfs_parse_packet_set() receives a pointer into the file header, but it calculates the remaining packet buffer size from PAGE_SIZE - 8. For version 1 headers the packet set starts later in the header, so this can overstate the available buffer. Pass the actual packet set buffer length from the caller and calculate per-packet limits from the remaining bytes in that buffer. Recompute the remaining length after consuming a tag 3 packet before parsing the following tag 11 packet.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ext2: Fix lost inode updates for IS_SYNC inodes ext2_setsize() and ext2_xattr_set2() had aCVE-2026-89601 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: ext2: Fix lost inode updates for IS_SYNC inodes ext2_setsize() and ext2_xattr_set2() had a construct like: if (IS_SYNC(inode)) { sync_inode_metadata(inode, 1); } else { mark_inode_dirty(inode); } which leads to lost inode updates for IS_SYNC inodes because sync_inode_metadata() does anything only if the inode is already dirty and hence inode updates may be simply lost. Fix the problem by unconditionally marking the inode dirty and *then* call sync_inode_metadata().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: hsi: omap_ssi_core: fix missing DMA mask setup for SSI controller device The OMAP SSI drivCVE-2026-89594 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: hsi: omap_ssi_core: fix missing DMA mask setup for SSI controller device The OMAP SSI driver uses a synthetic HSI controller device allocated via hsi_alloc_controller(), which does not go through the normal OF/platform device initialization path. As a result, the embedded struct device does not have a DMA mask initialized by default. After recent DMA API hardening changes, dma_map_sg() and related helpers now require a valid dma_mask to be present, otherwise the driver may crash or trigger warnings when attempting DMA mapping operations. Fix this by explicitly initializing the DMA mask for the SSI controller device and setting a 32-bit DMA mask, which matches the hardware capabilities.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: params: fix charp corruption on allocation failure param_set_charp() stores charp parameteCVE-2026-89552 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: params: fix charp corruption on allocation failure param_set_charp() stores charp parameters in allocated memory after slab is available, and releases the previous value when the parameter is updated. The previous value is released before the replacement allocation succeeds. If kmalloc_parameter() fails, the setter returns -ENOMEM with the parameter left as NULL. Failing zswap's compressor update before zswap is initialized can later trigger: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:strcmp+0x10/0x30 Call Trace: zswap_setup+0x3b1/0x490 zswap_enabled_param_set+0x5b/0xa0 param_attr_store+0x93/0xe0 module_attr_store+0x1c/0x30 kernfs_fop_write_iter+0x116/0x1f0 Allocate and copy the replacement first, then replace the parameter value only after allocation succeeds.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: sunrpc: route to a populated pool in svc_pool_for_cpu() svc_set_num_threads() spreads the CVE-2026-89549 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: sunrpc: route to a populated pool in svc_pool_for_cpu() svc_set_num_threads() spreads the requested threads evenly across the service's pools (base = nrservs / sv_nrpools). When a service runs fewer threads than it has pools -- e.g. an nfsd configured with fewer threads than the host has NUMA nodes while running in "pernode" or "percpu" mode -- the trailing pools are left with no threads at all. svc_xprt_enqueue() selects a pool from the CPU servicing the transport, queues the transport on that pool's sp_xprts, and only wakes a thread from the same pool. Each thread services exclusively its own pool, so a transport that lands on a threadless pool is enqueued on sp_xprts and never picked up: the connection hangs indefinitely. Have svc_pool_for_cpu() skip pools that currently have no threads, falling back to the next populated pool. This trades NUMA locality for a guarantee that the work is actually serviced. sp_nrthreads is only updated under the service mutex; the lockless read here is a best-effort routing hint, so annotate it with data_race().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Reject krb5 v2 wrap tokens with oversized ec field gss_krb5_unwrap_v2() sets buf->CVE-2026-89538 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Reject krb5 v2 wrap tokens with oversized ec field gss_krb5_unwrap_v2() sets buf->len to a logical length, which can be much smaller than head[0].iov_len (the allocated receive-page capacity). It then calls xdr_buf_trim() with a trim length derived from the 16-bit "extra count" (ec) field in the Kerberos v2 token header. The ec field is authenticated by the post-decrypt memcmp() against the encrypted header copy, so a randomly-mutated value is rejected. However, any peer holding a valid GSS context can legitimately encrypt a token whose ec exceeds the plaintext length. Per RFC 4121, such a token is structurally malformed. Although xdr_buf_trim() now clamps the buf->len subtraction to avoid unsigned underflow, the buffer is still left in a semantically invalid state (zero length, inconsistent iov lengths) when ec is oversized. Reject these tokens before calling xdr_buf_trim(), giving callers a well-defined GSS_S_DEFECTIVE_TOKEN error and keeping the xdr_buf internally consistent. The wrapped blob begins at a nonzero offset -- both callers pass len as offset + opaque_len -- so buf->len still counts t

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix offset arithmetic in read_chunk_range svc_rdma_read_chunk_range() walks a ReaCVE-2026-89533 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: svcrdma: Fix offset arithmetic in read_chunk_range svc_rdma_read_chunk_range() walks a Read chunk's segment list to build a sub-range starting at byte offset and spanning length bytes for a Position-Zero or Call chunk. Two arithmetic defects in the per-segment loop produce wrong DMA lengths and a u32 underflow: pcl_for_each_segment(segment, chunk) { if (offset > segment->rs_length) { offset -= segment->rs_length; continue; } dummy.rs_handle = segment->rs_handle; dummy.rs_length = min_t(u32, length, segment->rs_length) - offset; dummy.rs_offset = segment->rs_offset + offset; First, the skip predicate uses '>' instead of '>='. When offset equals the segment's full rs_length, the segment is fully consumed and should be skipped, but the loop falls through into the body. The resulting dummy.rs_length is min_t(u32, length, rs_length) - rs_length, which underflows to a near-UINT_MAX u32 when length is smaller than rs_length, or is zero otherwise. Second, the length formula subtr

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: clamp assoc request/response lengths before subtracting IE offsets ath6kl_cfCVE-2026-89524 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: clamp assoc request/response lengths before subtracting IE offsets ath6kl_cfg80211_connect_event() subtracts fixed IE offsets from assoc_req_len (-= 4) and assoc_resp_len (-= 6), both u8, with no lower bound. The aggregate check recently added to ath6kl_wmi_connect_event_rx() bounds the declared lengths from above (their sum must fit the received event), but an assoc request/response shorter than its fixed offset still underflows here: the u8 wraps to ~250, and cfg80211_connect_result() / cfg80211_roamed() then treat that wrapped value as the IE length and copy that many bytes out of the small assoc_info buffer to user space via nl80211, disclosing adjacent slab memory. Clamp both lengths to their offsets before subtracting. Found by 0sec (https://0sec.ai) using automated source analysis; the missing lower bound is evident from source. Compile-tested.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: cancel pending mlo_pm_work If the device is reset, suspended or unregiCVE-2026-89523 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: cancel pending mlo_pm_work If the device is reset, suspended or unregistered within that window, the pending work can still run and access vif/bss data that may already be freed, or send MCU commands while the firmware is not available. Add cancel_delayed_work_sync(&dev->mlo_pm_work) in all relevant teardown and suspend paths: - mt7925_mac_reset_work() (chip reset recovery) - mt7925e_unregister_device() (PCIe unbind) - mt7925_pci_suspend() (PCIe bus suspend) - mt7925_suspend() (mac80211 suspend) - mt7925u_suspend() (USB bus / runtime suspend) This ensures the work is stopped before the device state becomes invalid.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Lock the handler in ucma_set_ib_path() ucma_set_ib_path() calls ucma_event_handCVE-2026-89508 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/ucma: Lock the handler in ucma_set_ib_path() ucma_set_ib_path() calls ucma_event_handler() straight from the write() path, without the handler lock that keeps ctx->file stable while a uevent is queued. The handler re-reads ctx->file for every dereference: mutex_lock(&ctx->file->mut); /* file A */ list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */ mutex_unlock(&ctx->file->mut); /* file B */ wake_up_interruptible(&ctx->file->poll_wait); /* file B */ A concurrent ucma_migrate_id() reassigns ctx->file while the SET_OPTION caller sleeps in mutex_lock(), so the list_add_tail() lands on file B's event_list while only file A's mutex is held, racing every other user of that list: BUG: KASAN: slab-use-after-free in __list_add_valid_or_report+0x1aa/0x1c0 Read of size 8 at addr ffff888153c6a418 by task poc_corr/486 Call Trace: __list_add_valid_or_report+0x1aa/0x1c0 ucma_event_handler+0x1be/0xc00 ucma_set_ib_path+0x45e/0x710 ucma_set_option+0x32e/0x590 ucma_write+0x1f9/0x330 Allocated by task 505: ucma_write_cm_event+0x1a1/0x660 Freed by task 505: kfree+0x1da/0x4

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nvme: zero the discard fallback page nvme_setup_discard() always maps sizeof(struct nvme_dCVE-2026-89483 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: nvme: zero the discard fallback page nvme_setup_discard() always maps sizeof(struct nvme_dsm_range) * NVME_DSM_MAX_RANGES = 4096 bytes as the DSM payload however many ranges the command declares, because some devices ignore the 'Number of Ranges' field - the Fixes: commit records two that read past the declared ranges. A single-range discard fills only the first 16 bytes. Normally the buffer comes from kzalloc() and the other 4080 bytes are zero. When that allocation fails the code falls back to the per-controller ctrl->discard_page, which nvme_init_ctrl() obtains with alloc_page(GFP_KERNEL) and nothing ever zeroes, so those 4080 bytes are whatever the page last held and are handed to the controller. Reaching it requires the kzalloc(GFP_ATOMIC | __GFP_NOWARN) to fail, that is memory pressure; it is not remotely triggerable. Failing the allocation under KMSAN reproduces it, with the leaked tail full of vmemmap struct page pointers. The extent in the report is a partial transfer of the payload, not the whole 4096 bytes; the 16-byte boundary in it is the one declared range: [ 11.991601] BUG: KMSAN: uninit-va

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: fix NULL deref on untransmitted RECONF completion sctp_process_strreset_outreq(), scCVE-2026-89477 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: sctp: fix NULL deref on untransmitted RECONF completion sctp_process_strreset_outreq(), sctp_process_strreset_addstrm_out() and sctp_process_strreset_resp() complete a pending stream reconfiguration request by stopping the reconf timer on the transport it was sent on: t = asoc->strreset_chunk->transport; if (timer_delete(&t->reconf_timer)) sctp_transport_put(t); chunk->transport is assigned by __sctp_packet_append_chunk() when the chunk is appended to an outbound packet, and sctp_outq_flush_ctrl() arms the reconf timer at that same point. A request already published in asoc->strreset_chunk but not yet transmitted has neither, so completing it dereferences NULL. Two ways to get there. sctp_send_asconf_del_ip() sets asoc->src_out_of_asoc_ok without sending anything when the address being removed is the association's last one, and sctp_outq_flush_ctrl() then leaves every non-ASCONF control chunk queued; as only sctp_process_asconf_ack() clears that flag, it persists. An unprivileged process that removes such an address and then asks for a stream reset panics the kernel from softirq. A peer needs neither ASCON

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/sva: Set handle->dev before the SVA handle is visible iommu_attach_device_pasid() inCVE-2026-89451 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: iommu/sva: Set handle->dev before the SVA handle is visible iommu_attach_device_pasid() installs the new SVA attach handle in the group PASID lookup before iommu_sva_bind_device() returns. A concurrent bind can therefore find and reuse the same handle after iommu_sva_lock is dropped. handle->dev was initialized after dropping iommu_sva_lock. This leaves a window where a racing bind can return a handle whose dev pointer is still NULL. A subsequent iommu_sva_unbind_device() can then dereference it via handle->dev->iommu_group. Initialize handle->dev before releasing iommu_sva_lock so any visible SVA handle is fully initialized.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Don't hex dump attribute security buffer set_attribute() poCVE-2026-89444 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Don't hex dump attribute security buffer set_attribute() populates the security area of the BIOS attribute request buffer with the current admin password via populate_security_buffer(), then dumps the whole request buffer with print_hex_dump_bytes(). This can expose the plaintext admin password in the kernel log. The same issue was fixed for the password attribute path by commit d1a196e0a6dc ("platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data"). Remove the remaining dump from the BIOS attribute path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO rtl83xx_reset_assert() and CVE-2026-80999 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from the probe path, which may sleep and is not timing-critical. When the reset GPIO is provided by a sleeping controller such as an I2C I/O expander, gpiod_set_value() warns: WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61 Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT) Workqueue: events_unbound deferred_probe_work_func pc : gpiod_set_value+0x44/0x80 lr : rtl83xx_probe+0x1d8/0x3a0 Call trace: gpiod_set_value+0x44/0x80 (P) rtl83xx_probe+0x1d8/0x3a0 realtek_mdio_probe+0x24/0xa0 mdio_probe+0x38/0x78 really_probe+0xc4/0x3e0 __driver_probe_device+0x15c/0x1b8 driver_probe_device+0xb4/0x120 __device_attach_driver+0xb8/0x1a0 bus_for_each_drv+0x88/0xf0 __device_attach+0xa0/0x1d8 device_initial_probe+0x54/0x68 bus_probe_device+0x38/0xa0 deferred_probe_work_func+0xb8/0x120 process_one_work+0x184/0x4e8 worker_thread+0x188/0x308 kthread+0x130/0x150 ret_from_fork+0x10/0x20 Switch both help

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net/smc: do not dereference an unset send buffer on the SMC-D teardown path smc_close_streCVE-2026-80984 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/smc: do not dereference an unset send buffer on the SMC-D teardown path smc_close_stream_wait() calls smc_tx_prepared_sends() from inside its sk_wait_event() condition, and sk_wait_event() evaluates that condition once with the socket lock released. smcd_buf_detach() clears conn->sndbuf_desc from smc_conn_kill() under lock_sock(), so a link group terminating while a socket waits there leaves the helper dereferencing NULL, faulting out of close(). SIOCOUTQ reads the field by hand, and smc_close_cancel_work() drops the lock across two cancel_*_sync() calls. Sample the pointer once in the helper, report nothing prepared while it is unset, and bound the ioctl the same way. The receive tasklet dereferences the field directly in smc_cdc_msg_recv_action(), not through this helper; 1/2 is what keeps it from running that late.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: seg6: reset IP6CB after IPv6 decapsulation decap_and_validate() pulls the outer SRv6 headeCVE-2026-80976 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: seg6: reset IP6CB after IPv6 decapsulation decap_and_validate() pulls the outer SRv6 headers and makes the inner packet the skb network header. The IPv6 control block still contains values collected while parsing the outer packet, including nhoff and extension-header flags. End.DX6 and End.DT6 route the inner IPv6 packet directly to the IPv6 input path. An unprivileged user can reach End.DT6 from a user and net namespace by installing a local SID and injecting an outer packet with Hop-by-Hop and Destination Options headers followed by an SRH and a minimal inner IPv6 packet. The outer extension headers leave a large nhoff in IP6CB. After decapsulation, ip6_protocol_deliver_rcu() uses that stale offset on the inner packet and reads beyond the skb head. KASAN reports: BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu ip6_protocol_deliver_rcu+0x1118/0x1450 ip6_input_finish+0x11b/0x240 seg6_local_input_core+0xed/0x2e0 lwtunnel_input+0x1e9/0x4e0 ipv6_rthdr_rcv+0x525f/0x6c50 ip6_protocol_deliver_rcu+0xcb7/0x1450 Before clearing IP6CB for an inner IPv6 packet, save its incoming interface index

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate kset key_num and intra-segment bounds Two more fields decoded from theCVE-2026-80961 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dm-pcache: validate kset key_num and intra-segment bounds Two more fields decoded from the cache device go unbounded. The kset key_num drives cache_kset_crc() and the replay loop in cache_replay(), the writeback worker and the GC worker, but only the magic and a fixed-seed CRC are checked first, so a non-last kset whose key_num exceeds the PCACHE_KSET_KEYS_MAX buffer reads past its end before the CRC compare. A key's intra-segment offset and length in cache_key_decode() are taken verbatim, so a key running past its segment is replayed into the cache tree and the data CRC check and every later read hit then copy adjacent persistent memory into the caller's bio -- an out-of-bounds read that leaks to user space. Both fields are controlled by whoever supplies the cache device (CAP_SYS_ADMIN); the CRC seed is public. Add kset_onmedia_valid() to bound key_num before any kset read, and reject a key whose offset plus length, computed in 64 bits, exceeds the segment data_size. Valid metadata is unaffected.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: dm-pcache: bound the persisted tail-position offset cache_pos_decode() takes the persistedCVE-2026-80959 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dm-pcache: bound the persisted tail-position offset cache_pos_decode() takes the persisted key_tail and dirty_tail seg_off from the cache device and addresses within the segment with it. A seg_off at or past the segment data_size, controllable by whoever supplies the device (CAP_SYS_ADMIN), reads past the segment data. Reject a decoded seg_off that is not below the segment data_size.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: dm-pcache: clamp the tail kset read to the segment data region The tail-kset read in cacheCVE-2026-80958 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: dm-pcache: clamp the tail kset read to the segment data region The tail-kset read in cache_replay(), the writeback worker and the GC worker bounds its length by PCACHE_SEG_SIZE - seg_off, the raw segment size rather than the data region. A tail near the segment end reads past the segment data into the following control area. Clamp the read to cache_seg_remain(), the data region.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: dm-pcache: detect a cycle in the last-kset chain during replay cache_replay() follows the CVE-2026-80957 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dm-pcache: detect a cycle in the last-kset chain during replay cache_replay() follows the on-media last-kset chain by next_cache_seg_id with no cond_resched(). A forged chain that points back into a segment it has already visited makes the replay loop follow it forever. Cap the last-kset hops at cache->n_segs; a valid chain visits each segment at most once.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: dm-pcache: fix use-after-free and invalid seg operations in kset_replay() In kset_replay, CVE-2026-80955 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dm-pcache: fix use-after-free and invalid seg operations in kset_replay() In kset_replay, when key->seg_gen is stale (key->seg_gen < key->cache_pos.cache_seg->gen), cache_key_put(key) is called but then key->cache_pos.cache_seg is accessed as the argument to cache_seg_get(). This is a use-after-free on the freed key memory. Although mempool recycled memory is not immediately reclaimed or overwritten in practice, this is still a potential UAF bug. Additionally, for expired invalid keys, setting the cache->seg_map bit and calling cache_seg_get() is unreasonable since the corresponding segment data is no longer valid. Fix both issues by moving cache_seg_get() and __set_bit() after the gen check, so they only execute for valid keys, and using continue to skip invalid keys.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: pci: fix resource leak on failed NAPI setup rtw_pci_probe() allocates PCI resCVE-2026-80940 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: pci: fix resource leak on failed NAPI setup rtw_pci_probe() allocates PCI resources through rtw_pci_setup_resource() before it sets up NAPI. If rtw_pci_napi_init() fails, the error path jumps straight to err_pci_declaim and skips rtw_pci_destroy(), leaving the PCI resources allocated by rtw_pci_setup_resource() behind. Add a dedicated cleanup label for the NAPI setup failure path so probe destroys the PCI resources. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing current mainline kernels. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have a suitable rtw88 PCI board to test with, no runtime testing was able to be performed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026When XML batch processing is turned on and the XPath option is selected, the raw batch input goes through a default XPath/JAXP setup with no entity restrictionsCVE-2026-82578 · Other software · NextGen Healthcare · reported by ics-cert@hq.dhs.govHigh 8.7

  When XML batch processing is turned on and the XPath option is selected, the raw batch input goes through a default XPath/JAXP setup with no entity restrictions, so XXE injection can allow data exfiltration and denial-of-service attacks.

  Product

  Mirth Connect

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comcisa.gov

• Sep 11, 2026The XSLT Transformer Step builds a bare TransformerFactory without the proper security options set, so XXE injection can allow data exfiltration and denial-of-sCVE-2026-78224 · Other software · NextGen Healthcare · reported by ics-cert@hq.dhs.govHigh 8.8

  The XSLT Transformer Step builds a bare TransformerFactory without the proper security options set, so XXE injection can allow data exfiltration and denial-of-service attacks.

  Product

  Mirth Connect

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comcisa.gov

• Sep 11, 2026AVideo through 29.0 contains an insecure direct object reference (IDOR) vulnerability in objects/categoryDeleteAssets.json.php.CVE-2026-89257 · Other software · WWBN · reported by VulnCheckMedium 5.3

  AVideo through 29.0 contains an insecure direct object reference (IDOR) vulnerability in objects/categoryDeleteAssets.json.php. The endpoint validates only the Category::canCreateCategory() capability and a CSRF nonce before passing the attacker-supplied $_REQUEST['id'] to Category::deleteAssets(), which recursively removes {systemRootPath}videos/categories/assets/{id}/. It omits the Category::userCanEditCategory() ownership check enforced by the sibling Category::delete(). On installations where the non-default usersCanCreateNewCategories setting is enabled, an authenticated non-admin user with the canUpload capability can send a POST request with an arbitrary category ID and recursively delete any category's on-disk asset directory (icons/images). Category records and videos are not deleted. As of the advisory publication no patched version was available.

  Product

  AVideo

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Sep 11, 2026WWBN AVideo through commit c3edcc274c389816d434acadac07ee78eaf330c1 contains a stored cross-site scripting vulnerability in UserGroups::setGroup_name() that faiCVE-2026-89243 · Other software · WWBN · reported by VulnCheckCritical 9.2

  WWBN AVideo through commit c3edcc274c389816d434acadac07ee78eaf330c1 contains a stored cross-site scripting vulnerability in UserGroups::setGroup_name() that fails to sanitize group_name input. Administrators with canAdminUserGroups permission can inject malicious HTML and JavaScript that executes in the browser when other administrators access the user manager interface.

  Product

  AVideo

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Sep 11, 2026Under certain circumstances such as reset to factory default operation, the BMC root account is made active without a password on BullSequana XH3406 and XH3515.CVE-2025-15679 · Other software · Bull · reported by 5bcc34ac-0282-4e8a-96fc-046c583d3048High 7.3

  Under certain circumstances such as reset to factory default operation, the BMC root account is made active without a password on BullSequana XH3406 and XH3515.

  Product

  BullSequana XH3406

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordmyatos.my.site.com

• Sep 11, 2026WPCafe: Does not correctly restrict access to a set of order-management REST endpoints because their permission callbacks return an incorrect type on failureCVE-2026-86812 · WordPress plugins & themes · reported by WPScanMedium 6.5

  The WPCafe WordPress plugin before 3.0.18 does not correctly restrict access to a set of order-management REST endpoints because their permission callbacks return an incorrect type on failure, allowing unauthenticated users to disclose guest order information and to change the status of, or trash, any order.

  Product

  WPCafe

  Fixed in

  3.0.18

  What to do

  Update WPCafe to 3.0.18 or newer.

  Full record and what to do →NVD recordwpscan.com

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.