Updated 11 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,766exploited flaws on CISA’s list

36added in the last 30 days

512new WordPress flaws this week

391,181entries in the database

2,895 results · page 15 of 58

Mar 16, 2025A vulnerability, which was classified as problematic, has been found in StarSea99 starsea-mall 1.0.CVE-2025-2352 · Other software · StarSea99 · reported by VulDBMedium 4.8
A vulnerability, which was classified as problematic, has been found in StarSea99 starsea-mall 1.0. This issue affects some unknown processing of the file /admin/indexConfigs/save of the component Backend. The manipulation of the argument categoryName leads to cross site scripting. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. Other parameters might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way.
Product
starsea-mall
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com vuldb.com
Mar 13, 2025Tenda RX3 US_RX3V1.0br_V16.03.13.11_multi_TDE01 is vulnerable to buffer overflow via the schedStartTime and schedEndTime parameters at /goform/saveParentControlCVE-2025-29363 · Network & remote access · Tenda · reported by MITREHigh 7.5
Tenda RX3 US_RX3V1.0br_V16.03.13.11_multi_TDE01 is vulnerable to buffer overflow via the schedStartTime and schedEndTime parameters at /goform/saveParentControlInfo. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.
Product
Rx3 Firmware
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Mar 13, 2025Tenda RX3 US_RX3V1.0br_V16.03.13.11_multi_TDE01 is vulnerable to Buffer Overflow via the startIp and endIp parameters at /goform/SetPptpServerCfg.CVE-2025-29357 · Network & remote access · Tenda · reported by MITREHigh 7.5
Tenda RX3 US_RX3V1.0br_V16.03.13.11_multi_TDE01 is vulnerable to Buffer Overflow via the startIp and endIp parameters at /goform/SetPptpServerCfg. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.
Product
Rx3 Firmware
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com
Mar 13, 2025An issue was discovered in GitLab EE affecting all versions starting with 12.3 before 17.7.7, 17.8 prior to 17.8.5, and 17.9 prior to 17.9.2.CVE-2025-1257 · Websites & servers · GitLab · reported by cve@gitlab.comMedium 6.5
An issue was discovered in GitLab EE affecting all versions starting with 12.3 before 17.7.7, 17.8 prior to 17.8.5, and 17.9 prior to 17.9.2. A vulnerability in certain GitLab instances could allow an attacker to cause a denial of service condition by manipulating specific API inputs.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record gitlab.com hackerone.com
Mar 13, 2025An issue has been discovered in GitLab EE/CE affecting all versions starting from 16.9 before 17.7.7, all versions starting from 17.8 before 17.8.5, all versionCVE-2025-0652 · Websites & servers · GitLab · reported by cve@gitlab.comMedium 4.3
An issue has been discovered in GitLab EE/CE affecting all versions starting from 16.9 before 17.7.7, all versions starting from 17.8 before 17.8.5, all versions starting from 17.9 before 17.9.2 could allow unauthorized users to access confidential information intended for internal use only.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record gitlab.com hackerone.com
Mar 13, 2025An issue was discovered in GitLab EE affecting all versions starting from 17.2 before 17.7.7, all versions starting from 17.8 before 17.8.5, all versions startiCVE-2024-8402 · Websites & servers · GitLab · reported by cve@gitlab.comLow 3.7
An issue was discovered in GitLab EE affecting all versions starting from 17.2 before 17.7.7, all versions starting from 17.8 before 17.8.5, all versions starting from 17.9 before 17.9.2. An input validation issue in the Google Cloud IAM integration feature could have enabled a Maintainer to introduce malicious code.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record gitlab.com hackerone.com
Mar 13, 2025An issue was discovered in GitLab EE/CE affecting all versions starting from 11.5 before 17.7.7, all versions starting from 17.8 before 17.8.5, all versions staCVE-2024-12380 · Websites & servers · GitLab · reported by cve@gitlab.comMedium 4.4
An issue was discovered in GitLab EE/CE affecting all versions starting from 11.5 before 17.7.7, all versions starting from 17.8 before 17.8.5, all versions starting from 17.9 before 17.9.2. Certain user inputs in repository mirroring settings could potentially expose sensitive authentication information.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record gitlab.com hackerone.com
Mar 12, 2025Bitdefender Box, versions 1.3.11.490 through 1.3.11.505, uses the insecure HTTP protocol to download assets over the Internet to update and restart daemons and CVE-2024-13872 · Other software · Bitdefender · reported by cve-requests@bitdefender.comCritical 9.4
Bitdefender Box, versions 1.3.11.490 through 1.3.11.505, uses the insecure HTTP protocol to download assets over the Internet to update and restart daemons and detection rules on the devices. Updates can be remotely triggered through the /set_temp_token API method. Then, an unauthenticated and network-adjacent attacker can use man-in-the-middle (MITM) techniques to return malicious responses. Restarted daemons that use malicious assets can then be exploited for remote code execution on the device.
Product
BOX v1
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record bitdefender.com
Mar 8, 2025Starter Templates by FancyWP: Blind Server-Side Request ForgeryCVE-2024-13924 · WordPress plugins & themes · reported by WordfenceMedium 5.3
The Starter Templates by FancyWP plugin for WordPress is vulnerable to Blind Server-Side Request Forgery in all versions up to, and including, 2.0.0 via the 'http_request_host_is_external' filter. This makes it possible for unauthenticated attackers to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services.
Product
Starter Templates by FancyWP
Affected
up to 2.0.0
What to do
Affects up to 2.0.0. Update Starter Templates by FancyWP to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD record plugins.trac.wordpress.org wordfence.com
Mar 7, 2025A vulnerability has been found in StarSea99 starsea-mall 1.0/2.X and classified as critical.CVE-2025-2089 · Other software · StarSea99 · reported by VulDBMedium 5.3
A vulnerability has been found in StarSea99 starsea-mall 1.0/2.X and classified as critical. Affected by this vulnerability is the function updateUserInfo of the file /personal/updateInfo of the component com.siro.mall.controller.mall.UserController. The manipulation of the argument userId leads to improper access controls. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
Product
starsea-mall
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record vuldb.com vuldb.com
Mar 7, 2025A vulnerability, which was classified as problematic, has been found in StarSea99 starsea-mall 1.0.CVE-2025-2087 · Other software · StarSea99 · reported by VulDBMedium 5.1
A vulnerability, which was classified as problematic, has been found in StarSea99 starsea-mall 1.0. This issue affects some unknown processing of the file /admin/goods/update. The manipulation of the argument goodsName leads to cross site scripting. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
Product
starsea-mall
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com vuldb.com
Mar 7, 2025A vulnerability classified as problematic was found in StarSea99 starsea-mall 1.0.CVE-2025-2086 · Other software · StarSea99 · reported by VulDBMedium 5.1
A vulnerability classified as problematic was found in StarSea99 starsea-mall 1.0. This vulnerability affects unknown code of the file /admin/indexConfigs/update. The manipulation of the argument redirectUrl leads to cross site scripting. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.
Product
starsea-mall
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com vuldb.com
Mar 7, 2025A vulnerability classified as problematic has been found in StarSea99 starsea-mall 1.0.CVE-2025-2085 · Other software · StarSea99 · reported by VulDBMedium 5.1
A vulnerability classified as problematic has been found in StarSea99 starsea-mall 1.0. This affects an unknown part of the file /admin/carousels/save. The manipulation of the argument redirectUrl leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.
Product
starsea-mall
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com vuldb.com
Mar 5, 2025In Jenkins 2.499 and earlier, LTS 2.492.1 and earlier, redirects starting with backslash (`\`) characters are considered safe, allowing attackers to perform phiCVE-2025-27625 · Websites & servers · Jenkins Project · reported by jenkinsci-cert@googlegroups.comMedium 4.3
In Jenkins 2.499 and earlier, LTS 2.492.1 and earlier, redirects starting with backslash (`\`) characters are considered safe, allowing attackers to perform phishing attacks by having users go to a Jenkins URL that will forward them to a different site, because browsers interpret these characters as part of scheme-relative redirects.
Product
Jenkins
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record jenkins.io
Feb 28, 2025Lack of encryption in transit for cloud infrastructure facilitating potential for sensitive data manipulation or exposure.CVE-2025-24849 · Other software · Dario Health · reported by ics-cert@hq.dhs.govHigh 7.5
Lack of encryption in transit for cloud infrastructure facilitating potential for sensitive data manipulation or exposure.
Product
USB-C Blood Glucose Monitoring System Starter Kit Android Applications
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record cisa.gov dariohealth.com
Feb 28, 2025Insecure file retrieval process that facilitates potential for file manipulation to affect product stability and confidentiality, integrity, authenticity, and aCVE-2025-24843 · Other software · Dario Health · reported by ics-cert@hq.dhs.govMedium 5.1
Insecure file retrieval process that facilitates potential for file manipulation to affect product stability and confidentiality, integrity, authenticity, and attestation of stored data.
Product
USB-C Blood Glucose Monitoring System Starter Kit Android Applications
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record cisa.gov dariohealth.com
Feb 28, 2025Unauthenticated log effects metrics gathering incident response efforts and potentially exposes risk of injection attacks (ex log injection).CVE-2025-23405 · Other software · Dario Health · reported by ics-cert@hq.dhs.govMedium 6.9
Unauthenticated log effects metrics gathering incident response efforts and potentially exposes risk of injection attacks (ex log injection).
Product
USB-C Blood Glucose Monitoring System Starter Kit Android Applications
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record cisa.gov dariohealth.com
Feb 28, 2025An attacker could expose cross-user personal identifiable information (PII) and personal health information transmitted to the Android device via the Dario HealCVE-2025-20060 · Other software · Dario Health · reported by ics-cert@hq.dhs.govHigh 8.7
An attacker could expose cross-user personal identifiable information (PII) and personal health information transmitted to the Android device via the Dario Health application database.
Product
USB-C Blood Glucose Monitoring System Starter Kit Android Applications
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record cisa.gov dariohealth.com
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: use static NDP16 location in URB Original code allowed for the start of NDCVE-2025-21742 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: use static NDP16 location in URB Original code allowed for the start of NDP16 to be anywhere within the URB based on the `wNdpIndex` value in NTH16. Only the start position of NDP16 was checked, so it was possible for even the fixed-length part of NDP16 to extend past the end of URB, leading to an out-of-bounds read. On iOS devices, the NDP16 header always directly follows NTH16. Rely on and check for this specific format. This, along with NCM-specific minimal URB length check that already exists, will ensure that the fixed-length part of NDP16 plus a set amount of DPEs fit within the URB. Note that this commit alone does not fully address the OoB read. The limit on the amount of DPEs needs to be enforced separately.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Fix resetting of tracepoints If a timerlat tracer is started with the osnCVE-2025-21733 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Fix resetting of tracepoints If a timerlat tracer is started with the osnoise option OSNOISE_WORKLOAD disabled, but then that option is enabled and timerlat is removed, the tracepoints that were enabled on timerlat registration do not get disabled. If the option is disabled again and timelat is started, then it triggers a warning in the tracepoint code due to registering the tracepoint again without ever disabling it. Do not use the same user space defined options to know to disable the tracepoints when timerlat is removed. Instead, set a global flag when it is enabled and use that flag to know to disable the events. ~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options ~# echo timerlat > /sys/kernel/tracing/current_tracer ~# echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options ~# echo nop > /sys/kernel/tracing/current_tracer ~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options ~# echo timerlat > /sys/kernel/tracing/current_tracer Triggers: ------------[ cut here ]------------ WARNING: CPU: 6 PID: 1337 at kernel/tracepoint.c:294 tracepoint_add_func+0x3b
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: btrfs: fix hang during unmount when block group reclaim task is running When we start an uCVE-2022-49702 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: btrfs: fix hang during unmount when block group reclaim task is running When we start an unmount, at close_ctree(), if we have the reclaim task running and in the middle of a data block group relocation, we can trigger a deadlock when stopping an async reclaim task, producing a trace like the following: [629724.498185] task:kworker/u16:7 state:D stack: 0 pid:681170 ppid: 2 flags:0x00004000 [629724.499760] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs] [629724.501267] Call Trace: [629724.501759] <TASK> [629724.502174] __schedule+0x3cb/0xed0 [629724.502842] schedule+0x4e/0xb0 [629724.503447] btrfs_wait_on_delayed_iputs+0x7c/0xc0 [btrfs] [629724.504534] ? prepare_to_wait_exclusive+0xc0/0xc0 [629724.505442] flush_space+0x423/0x630 [btrfs] [629724.506296] ? rcu_read_unlock_trace_special+0x20/0x50 [629724.507259] ? lock_release+0x220/0x4a0 [629724.507932] ? btrfs_get_alloc_profile+0xb3/0x290 [btrfs] [629724.508940] ? do_raw_spin_unlock+0x4b/0xa0 [629724.509688] btrfs_async_reclaim_metadata_space+0x139/0x320 [btrfs] [629724.510922] process_one_work+0x252/0x5a0 [629724.511694]
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_slow_start_after_idle.CVE-2022-49572 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 4.7
In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_slow_start_after_idle. While reading sysctl_tcp_slow_start_after_idle, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave) Set the startinCVE-2022-49557 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave) Set the starting uABI size of KVM's guest FPU to 'struct kvm_xsave', i.e. to KVM's historical uABI size. When saving FPU state for usersapce, KVM (well, now the FPU) sets the FP+SSE bits in the XSAVE header even if the host doesn't support XSAVE. Setting the XSAVE header allows the VM to be migrated to a host that does support XSAVE without the new host having to handle FPU state that may or may not be compatible with XSAVE. Setting the uABI size to the host's default size results in out-of-bounds writes (setting the FP+SSE bits) and data corruption (that is thankfully caught by KASAN) when running on hosts without XSAVE, e.g. on Core2 CPUs. WARN if the default size is larger than KVM's historical uABI size; all features that can push the FPU size beyond the historical size must be opt-in. ================================================================== BUG: KASAN: slab-out-of-bounds in fpu_copy_uabi_to_guest_fpstate+0x86/0x130 Read of size 8 at addr ffff888011e33a00 by task qemu-build/681 CPU: 1 PID: 681 Comm: qemu-build No
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: ath10k: skip ath10k_halt during suspend for driver state RESTARTING Double free crash is oCVE-2022-49519 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: ath10k: skip ath10k_halt during suspend for driver state RESTARTING Double free crash is observed when FW recovery(caused by wmi timeout/crash) is followed by immediate suspend event. The FW recovery is triggered by ath10k_core_restart() which calls driver clean up via ath10k_halt(). When the suspend event occurs between the FW recovery, the restart worker thread is put into frozen state until suspend completes. The suspend event triggers ath10k_stop() which again triggers ath10k_halt() The double invocation of ath10k_halt() causes ath10k_htt_rx_free() to be called twice(Note: ath10k_htt_rx_alloc was not called by restart worker thread because of its frozen state), causing the crash. To fix this, during the suspend flow, skip call to ath10k_halt() in ath10k_stop() when the current driver state is ATH10K_STATE_RESTARTING. Also, for driver state ATH10K_STATE_RESTARTING, call ath10k_wait_for_suspend() in ath10k_stop(). This is because call to ath10k_wait_for_suspend() is skipped later in [ath10k_halt() > ath10k_core_stop()] for the driver state ATH10K_STATE_RESTARTING. The frozen restart worker thread will be canc
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: ip_gre: test csum_start instead of transport header GRE with TUNNEL_CSUM will apply local CVE-2022-49340 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: ip_gre: test csum_start instead of transport header GRE with TUNNEL_CSUM will apply local checksum offload on CHECKSUM_PARTIAL packets. ipgre_xmit must validate csum_start after an optional skb_pull, else lco_csum may trigger an overflow. The original check was if (csum && skb_checksum_start(skb) < skb->data) return -EINVAL; This had false positives when skb_checksum_start is undefined: when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement was straightforward if (csum && skb->ip_summed == CHECKSUM_PARTIAL && skb_checksum_start(skb) < skb->data) return -EINVAL; But was eventually revised more thoroughly: - restrict the check to the only branch where needed, in an uncommon GRE path that uses header_ops and calls skb_pull. - test skb_transport_header, which is set along with csum_start in skb_partial_csum_set in the normal header_ops datapath. Turns out skbs can arrive in this branch without the transport header set, e.g., through BPF redirection. Revise the check back to check csum_start directly, and only if CHECKSUM_PARTIAL. Do leave the check in the updated location. Check field re
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Address NULL pointer dereference after starget_to_rport() Calls to starget_to_CVE-2022-49332 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Address NULL pointer dereference after starget_to_rport() Calls to starget_to_rport() may return NULL. Add check for NULL rport before dereference.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED If the calCVE-2022-49247 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED If the callback 'start_streaming' fails, then all queued buffers in the driver should be returned with state 'VB2_BUF_STATE_QUEUED'. Currently, they are returned with 'VB2_BUF_STATE_ERROR' which is wrong. Fix this. This also fixes the warning: [ 65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common] [ 65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6 [ 65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G W 5.16.0-rc4-
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix call timer start racing with call destruction The rxrpc_call struct has a timerCVE-2022-49149 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8
In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix call timer start racing with call destruction The rxrpc_call struct has a timer used to handle various timed events relating to a call. This timer can get started from the packet input routines that are run in softirq mode with just the RCU read lock held. Unfortunately, because only the RCU read lock is held - and neither ref or other lock is taken - the call can start getting destroyed at the same time a packet comes in addressed to that call. This causes the timer - which was already stopped - to get restarted. Later, the timer dispatch code may then oops if the timer got deallocated first. Fix this by trying to take a ref on the rxrpc_call struct and, if successful, passing that ref along to the timer. If the timer was already running, the ref is discarded. The timer completion routine can then pass the ref along to the call's work item when it queues it. If the timer or work item where already queued/running, the extra ref is discarded.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix crash when startup fails.CVE-2022-49129 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix crash when startup fails. If the nic fails to start, it is possible that the reset_work has already been scheduled. Ensure the work item is canceled so we do not have use-after-free crash in case cleanup is called before the work item is executed. This fixes crash on my x86_64 apu2 when mt7921k radio fails to work. Radio still fails, but OS does not crash.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Feb 26, 2025In the Linux kernel, the following vulnerability has been resolved: mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0) If an mremap(CVE-2022-49077 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5
In the Linux kernel, the following vulnerability has been resolved: mmmremap.c: avoid pointless invalidate_range_start/end on mremap(old_size=0) If an mremap() syscall with old_size=0 ends up in move_page_tables(), it will call invalidate_range_start()/invalidate_range_end() unnecessarily, i.e. with an empty range. This causes a WARN in KVM's mmu_notifier. In the past, empty ranges have been diagnosed to be off-by-one bugs, hence the WARNing. Given the low (so far) number of unique reports, the benefits of detecting more buggy callers seem to outweigh the cost of having to fix cases such as this one, where userspace is doing something silly. In this particular case, an early return from move_page_tables() is enough to fix the issue.
Product
Linux
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record git.kernel.org git.kernel.org
Feb 24, 2025Incorrect access control in the component /iclock/Settings?restartNCS=1 of NovaCHRON Zeitsysteme GmbH & Co.CVE-2024-53542 · Other software · reported by MITREMedium 6.5
Incorrect access control in the component /iclock/Settings?restartNCS=1 of NovaCHRON Zeitsysteme GmbH & Co. KG Smart Time Plus v8.x to v8.6 allows attackers to arbitrarily restart the NCServiceManger via a crafted GET request.
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record secure77.de
Feb 24, 2025Contact Form 7 Star Rating with font Awesome: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')CVE-2025-27304 · WordPress plugins & themes · reported by PatchstackMedium 5.9
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in themelogger Contact Form 7 Star Rating with font Awesome contact-form-7-star-rating-with-font-awersome allows Stored XSS.This issue affects Contact Form 7 Star Rating with font Awesome: from n/a through <= 1.3.
Product
Contact Form 7 Star Rating with font Awesome
Affected
up to 1.3
What to do
Affects up to 1.3. Update Contact Form 7 Star Rating with font Awesome to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD record patchstack.com
Feb 24, 2025Contact Form 7 Star Rating: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')CVE-2025-27303 · WordPress plugins & themes · reported by PatchstackMedium 5.9
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in themelogger Contact Form 7 Star Rating contact-form-7-star-rating allows Stored XSS.This issue affects Contact Form 7 Star Rating: from n/a through <= 1.10.
Product
Contact Form 7 Star Rating
Affected
up to 1.10
What to do
Affects up to 1.10. Update Contact Form 7 Star Rating to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD record patchstack.com
Feb 20, 2025MasterSAM Star Gate 11 is vulnerable to directory traversal via /adama/adama/downloadService.CVE-2024-55457 · Other software · reported by MITREMedium 6.5
MasterSAM Star Gate 11 is vulnerable to directory traversal via /adama/adama/downloadService. An attacker can exploit this vulnerability by manipulating the file parameter to access arbitrary files on the server, potentially exposing sensitive information.
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com
Feb 18, 2025A buffer overflow vulnerability was discovered in D-Link DSL-3782 v1.01 via the sstartip, sendip, dstartip, and dendip parameters.CVE-2025-25892 · Other software · Dlink · reported by MITREMedium 5.7
A buffer overflow vulnerability was discovered in D-Link DSL-3782 v1.01 via the sstartip, sendip, dstartip, and dendip parameters. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted packet.
Product
Dsl-3782 Firmware
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Feb 17, 2025The PAM module pam_cap.so of libcap configuration supports group names starting with “@”, during actual parsing, configurations not starting with “@” are incorrCVE-2025-1390 · Other software · OpenAnolis · reported by security@openanolis.orgMedium 6.1
The PAM module pam_cap.so of libcap configuration supports group names starting with “@”, during actual parsing, configurations not starting with “@” are incorrectly recognized as group names. This may result in nonintended users being granted an inherited capability set, potentially leading to security risks. Attackers can exploit this vulnerability to achieve local privilege escalation on systems where /etc/security/capability.conf is used to configure user inherited privileges by constructing specific usernames.
Product
Anolis OS
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record bugzilla.openanolis.cn cert-portal.siemens.com
Feb 15, 2025Responsive Plus – Starter Templates, Advanced Features and Customizer Settings for Responsive: Server-Side Request ForgeryCVE-2024-13834 · WordPress plugins & themes · reported by WordfenceMedium 5.4
The Responsive Plus – Starter Templates, Advanced Features and Customizer Settings for Responsive Theme plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 3.1.4 via the 'remote_request' function. This makes it possible for authenticated attackers, with contributor-level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services.
Product
Responsive Plus – Starter Templates, Advanced Features and Customizer Settings for Responsive
Affected
up to 3.1.4
What to do
Affects up to 3.1.4. Update Responsive Plus – Starter Templates, Advanced Features and Customizer Settings for Responsive to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD record plugins.trac.wordpress.org wordfence.com
Feb 14, 2025The standard user uses the run as function to start the MEAC applications with administrative privileges.CVE-2025-0867 · Other software · SICK AG · reported by psirt@sick.deCritical 9.9
The standard user uses the run as function to start the MEAC applications with administrative privileges. To ensure that the system can startup on its own, the credentials of the administrator were stored. Consequently, the EPC2 user can execute any command with administrative privileges. This allows a privilege escalation to the administrative level.
Product
SICK MEAC300
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record cdn.sick.com sick.com
Feb 13, 2025With a specially crafted Python script, an attacker could send continuous startMeasurement commands over an unencrypted Bluetooth connection to the affected dCVE-2025-24836 · Other software · Qardio · reported by ics-cert@hq.dhs.govMedium 6.1
With a specially crafted Python script, an attacker could send continuous startMeasurement commands over an unencrypted Bluetooth connection to the affected device. This would prevent the device from connecting to a clinician's app to take patient readings and ostensibly flood it with requests, resulting in a denial-of-service condition.
Product
Heart Health IOS Mobile Application
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record cisa.gov qardio.com
Feb 13, 2025An issue was discovered in GitLab EE affecting all versions starting from 16.0 prior to 17.6.5, starting from 17.7 prior to 17.7.4, and starting from 17.8 priorCVE-2024-3303 · Websites & servers · GitLab · reported by cve@gitlab.comMedium 6.4
An issue was discovered in GitLab EE affecting all versions starting from 16.0 prior to 17.6.5, starting from 17.7 prior to 17.7.4, and starting from 17.8 prior to 17.8.2, which allows an attacker to exfiltrate contents of a private issue using prompt injection.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record gitlab.com hackerone.com
Feb 12, 2025An issue was discovered in GitLab CE/EE affecting all versions starting from 17.1 prior to 17.6.0, which allows an attacker with maintainer role to trigger a piCVE-2024-8266 · Websites & servers · GitLab · reported by cve@gitlab.comMedium 4.4
An issue was discovered in GitLab CE/EE affecting all versions starting from 17.1 prior to 17.6.0, which allows an attacker with maintainer role to trigger a pipeline as project owner under certain circumstances.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record gitlab.com hackerone.com
Feb 12, 2025An issue was discovered in GitLab CE/EE affecting all versions starting from 16.4 prior to 17.5.0 which allows an attacker to trigger a pipeline as another userCVE-2024-7102 · Websites & servers · GitLab · reported by cve@gitlab.comCritical 9.6
An issue was discovered in GitLab CE/EE affecting all versions starting from 16.4 prior to 17.5.0 which allows an attacker to trigger a pipeline as another user under certain circumstances.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record gitlab.com hackerone.com
Feb 10, 2025Netty, an asynchronous, event-driven network application framework, has a vulnerability starting in version 4.1.91.Final and prior to version 4.1.118.Final.CVE-2025-24970 · Other software · netty · reported by GitHubHigh 7.5
Netty, an asynchronous, event-driven network application framework, has a vulnerability starting in version 4.1.91.Final and prior to version 4.1.118.Final. When a special crafted packet is received via SslHandler it doesn't correctly handle validation of such a packet in all cases which can lead to a native crash. Version 4.1.118.Final contains a patch. As workaround its possible to either disable the usage of the native SSLEngine or change the code manually.
Product
netty
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record github.com github.com
Feb 7, 2025Starter Templates by FancyWP: Cross-Site Request Forgery (CSRF)CVE-2025-25106 · WordPress plugins & themes · reported by PatchstackCritical 9.6
Cross-Site Request Forgery (CSRF) vulnerability in FancyWP Starter Templates by FancyWP starter-templates allows Cross Site Request Forgery.This issue affects Starter Templates by FancyWP: from n/a through <= 2.0.0.
Product
Starter Templates by FancyWP
Affected
up to 2.0.0
What to do
Affects up to 2.0.0. Update Starter Templates by FancyWP to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD record patchstack.com
Feb 6, 2025A Denial of Service (DoS) issue has been discovered in GitLab CE/EE affecting all versions starting from 7.14.1 prior to 17.3.7, 17.4 prior to 17.4.4, and 17.5 CVE-2025-1072 · Websites & servers · GitLab · reported by cve@gitlab.comMedium 6.5
A Denial of Service (DoS) issue has been discovered in GitLab CE/EE affecting all versions starting from 7.14.1 prior to 17.3.7, 17.4 prior to 17.4.4, and 17.5 prior to 17.5.2. A denial of service could occur upon importing maliciously crafted content using the Fogbugz importer.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record about.gitlab.com gitlab.com
Feb 5, 2025An issue has been discovered in GitLab CE/EE affecting all versions starting from 15.7 prior to 16.9.7, starting from 16.10 prior to 16.10.5, and starting from CVE-2024-2878 · Websites & servers · GitLab · reported by cve@gitlab.comHigh 7.5
An issue has been discovered in GitLab CE/EE affecting all versions starting from 15.7 prior to 16.9.7, starting from 16.10 prior to 16.10.5, and starting from 16.11 prior to 16.11.2. It was possible for an attacker to cause a denial of service by crafting unusual search terms for branch names.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record gitlab.com hackerone.com
Feb 5, 2025An issue has been discovered in GitLab CE/EE affecting all versions starting from 14.0 prior to 16.9.7, starting from 16.10 prior to 16.10.5, and starting from CVE-2024-3976 · Websites & servers · GitLab · reported by cve@gitlab.comMedium 6.5
An issue has been discovered in GitLab CE/EE affecting all versions starting from 14.0 prior to 16.9.7, starting from 16.10 prior to 16.10.5, and starting from 16.11 prior to 16.11.2. It was possible to disclose via the UI the confidential issues title and description from a public project to unauthorised instance users.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record gitlab.com hackerone.com
Feb 5, 2025An issue was discovered in GitLab CE/EE affecting all versions starting from 13.6 prior to 17.2.9, starting from 17.3 prior to 17.3.5, and starting from 17.4 prCVE-2024-9631 · Websites & servers · GitLab · reported by cve@gitlab.comHigh 7.5
An issue was discovered in GitLab CE/EE affecting all versions starting from 13.6 prior to 17.2.9, starting from 17.3 prior to 17.3.5, and starting from 17.4 prior to 17.4.2, where viewing diffs of MR with conflicts can be slow.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record gitlab.com hackerone.com
Feb 5, 2025An issue was discovered in GitLab CE/EE affecting all versions prior to 16.11.6, starting from 17.0 prior to 17.0.4, and starting from 17.1 prior to 17.1.2, whiCVE-2024-5528 · Websites & servers · GitLab · reported by cve@gitlab.comLow 3.5
An issue was discovered in GitLab CE/EE affecting all versions prior to 16.11.6, starting from 17.0 prior to 17.0.4, and starting from 17.1 prior to 17.1.2, which allows a subdomain takeover in GitLab Pages.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record gitlab.com hackerone.com
Feb 5, 2025An issue was discovered in GitLab EE affecting all versions starting from 16.0 prior to 17.0.6, starting from 17.1 prior to 17.1.4, and starting from 17.2 priorCVE-2024-6356 · Websites & servers · GitLab · reported by cve@gitlab.comMedium 4.4
An issue was discovered in GitLab EE affecting all versions starting from 16.0 prior to 17.0.6, starting from 17.1 prior to 17.1.4, and starting from 17.2 prior to 17.2.2, which allowed cross project access for Security policy bot.
Product
GitLab
What to do
Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD record gitlab.com hackerone.com

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Vulnerability database

The flaws that hit local websites, every Friday.

Tell us what you're building.