Vulnerability database

9,165 results · page 15 of 184

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: udf: Mark LVID buffer as uptodate before marking it dirty When an I/O error occurs while wCVE-2026-93140 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: udf: Mark LVID buffer as uptodate before marking it dirty When an I/O error occurs while writing the Logical Volume Integrity Descriptor (LVID) buffer to the block device, the block layer's completion handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the buffer. However, the buffer still contains valid LVID data in memory. If the filesystem is subsequently remounted read-write or synced, `udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call `mark_buffer_dirty()`. This triggers a spurious `WARN_ON_ONCE(!buffer_uptodate(bh))` warning in `mark_buffer_dirty()` because the buffer is not marked uptodate, even though its in-memory contents are valid and are about to be overwritten. To prevent this spurious warning, unconditionally set the `BH_Uptodate` flag before calling `mark_buffer_dirty()` in `udf_open_lvid()` and `udf_sync_fs()`. This acknowledges that the in-memory buffer is valid and matches the workaround previously applied to `udf_close_lvid()` in commit 853a0c25baf9 ("udf: Mark LVID buffer as uptodate before marking it dirty"). Extending this workaround ensures consisten

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uac: validate rate list length before storing UAC1 and UAC2 configfs rate-lisCVE-2026-93122 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uac: validate rate list length before storing UAC1 and UAC2 configfs rate-list attributes parse a comma-separated list of sampling rates and store each parsed value in fixed-size arrays. The arrays have UAC_MAX_RATES entries, but the store paths do not check that the input contains at most that many tokens before writing through opts->name##s[i++]. Writing more than ten rates therefore writes past the end of the p_srates[] or c_srates[] array in struct f_uac1_opts or struct f_uac2_opts. With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the UAC1 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac1.c:1669:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac1_opts_p_srate_store configfs_write_iter vfs_write ksys_write do_syscall_64 The same reproducer against the UAC2 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac2.c:2087:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac2_opts_p_srate_store conf

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: hfsplus: validate thread record before delete key rebuild hfsplus_delete_cat() is called wCVE-2026-93095 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: hfsplus: validate thread record before delete key rebuild hfsplus_delete_cat() is called with str == NULL when the last open reference to an unlinked HFS+ hardlink backing inode is closed. In that case, the function finds the catalog thread by CNID and rebuilds the catalog key from thread.nodeName. That reconstruction path reads thread.nodeName.length directly from the catalog B-tree into fd.search_key and then copies length * 2 bytes into fd.search_key->cat.name.unicode. It does not first check that the found record is a thread record or that its size matches the thread name. A corrupted image can therefore provide an oversized thread name length and make hfs_bnode_read() write past the catalog search-key allocation. Read the CNID record through hfsplus_brec_read_cat(), which bounds the record read to sizeof(hfsplus_cat_entry) and verifies that a thread record's size exactly matches nodeName.length. Together, these checks ensure an accepted thread name fits HFSPLUS_MAX_STRLEN. Reject non-thread records before building the delete key from the validated thread name. Share the thread-record-type helper between

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Avoid IDR updates while cleaning channels scmi_cleanup_channels() walkCVE-2026-93086 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Avoid IDR updates while cleaning channels scmi_cleanup_channels() walks the TX/RX channel IDRs with idr_for_each() to free transport resources and destroy the dedicated transport devices before calling idr_destroy(). The destroy callback removed each entry from the same IDR being walked. That is not needed for this cleanup path, and it is unsafe because idr_for_each() has not advanced its radix-tree iterator while the callback is running. Removing the current entry from the callback can invalidate the iterator state. The callback also cannot be protected by rcu_read_lock(), because scmi_device_destroy() may sleep. Leave IDR teardown to the following idr_destroy() call and keep the callback limited to device destruction.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize abort state updates dw_edma_abort_interrupt() drops vc.lock CVE-2026-93041 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize abort state updates dw_edma_abort_interrupt() drops vc.lock before changing request and status. issue_pending() can acquire the lock in that small window, observe the old busy state, and skip starting queued descriptors. Then the abort handler overwrites the channel status as idle, leaving the new descriptors stranded for good. Keep descriptor completion and the state transition in the same critical section.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize channel state checks pause() and resume() read and update chCVE-2026-93040 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Serialize channel state checks pause() and resume() read and update channel state without holding vc.lock, while the interrupt handlers update the same state under it. Take the same lock around those state checks so that request, status, and configured stay consistent. For example, pause() can observe EDMA_ST_BUSY right before the interrupt handler completes the final descriptor and moves the channel to EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No further interrupt will acknowledge the request, and since issue_pending() requires EDMA_REQ_NONE, the channel is wedged for good: terminate_all() leaves the stale request behind, so even reconfiguring the channel does not recover it. issue_pending() already runs under vc.lock, but it tests configured before taking it. Move that test under the lock as well, so configured, request, and status are evaluated as one channel-state snapshot.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[] For a user QP, qp->sq.quCVE-2026-92525 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate num_sge/cur_sge before indexing wqe->dma.sge[] For a user QP, qp->sq.queue is a ring the application writes directly, so rxe_post_send() takes the is_user branch and only schedules send_task without validating the WQE. rxe_requester() consumes it in place via req_next_wqe() and calls copy_data(), which indexes &wqe->dma.sge[cur_sge] with the attacker-controlled num_sge/cur_sge. Only the kernel path bounds num_sge (validate_send_wr()); the user WQE is never checked, so a local unprivileged user can post a WQE with an out-of-range cur_sge or oversized num_sge and force an out-of-bounds read of the per-WQE sge array in copy_data() (vmalloc OOB read, local DoS). Bound num_sge to qp->sq.max_sge in rxe_requester() before use, the way get_srq_wqe() already guards SRQ entries, and bound cur_sge only when the WQE carries payload (dma.resid): copy_data() returns early on a zero-length copy before touching dma->sge[], so a zero-payload WQE -- the only kind a max_sge == 0 QP can post -- stays valid. Reproduced under KASAN; the vmalloc-out-of-bounds in copy_data() is gone.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: validate dynamic counter attribute length RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is aCVE-2026-92523 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: validate dynamic counter attribute length RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is a nested attribute whose children are consumed directly with nla_get_u32(). The top-level policy validates only the container, so it does not establish the fixed shape of each child. Require every child payload to be exactly one u32 before reading it.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: validate MADT IOAPIC entry bounds The IOAPIC hotplug lookup parses both MCVE-2026-92522 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.3

  In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: validate MADT IOAPIC entry bounds The IOAPIC hotplug lookup parses both MADT and _MAT records directly. The MADT walk previously used a subtable's declared length to advance the cursor after only locating a generic header. The _MAT path likewise passed a generic header to the IOAPIC helper. Validate that a current record has a complete generic header, that its declared length is contained in the available record range, and that a typed IOAPIC record contains the full fixed IOAPIC body before reading its fields. Use the same relation for both MADT and _MAT provider paths.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ext4: validate readdir offset before accessing dirent A corrupted directory can trigger thCVE-2026-92499 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ext4: validate readdir offset before accessing dirent A corrupted directory can trigger the following KASAN report when ext4_readdir() resumes from an invalid position: BUG: KASAN: use-after-free in __ext4_check_dir_entry+0x5ef/0x820 Read of size 2 at addr ffff88810a646000 by task repro_linear/509 Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x630 kasan_report+0xce/0x100 __ext4_check_dir_entry+0x5ef/0x820 ext4_readdir+0xcde/0x2b70 iterate_dir+0x1a1/0x520 __x64_sys_getdents64+0x12b/0x220 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> KASAN reports use-after-free because the out-of-bounds access lands in an adjacent freed page. The directory buffer itself is still referenced. ext4_dir_llseek() invalidates the directory cookie so that ext4_readdir() rescans directory entries from the start of the block. The rescan checks only the lower bound of rec_len before advancing. A corrupted rec_len can therefore place the offset where the block has insufficient space for a complete directory entry. The rescan itself may dereference that tr

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: liveupdate: Remember FLB retrieve() status LUO keeps track of successful retrieve attemptsCVE-2026-92483 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: liveupdate: Remember FLB retrieve() status LUO keeps track of successful retrieve attempts on an FLB. It does so to avoid multiple retrievals of the same FLB. Multiple retrievals cause problems because once the FLB is retrieved, the serialized data structures are likely freed and the FLB is likely in a very different state from what the code expects. All this works well when retrieve succeeds. When it fails, luo_flb_retrieve_one() returns the error immediately, without ever storing anywhere that a retrieve was attempted or what its error code was. If the user attempts to retrieve another file registered with the same FLB, LUO will attempt to call the FLB's retrieve() callback again. The retry is problematic for much of the same reasons listed above. The FLB is likely in a very different state than what the retrieve logic normally expects (e.g. some KHO pages may have already been restored and freed). There is no sane way of attempting the retrieve again. Remember the error retrieve returned and directly return it on a retry. This is done by changing the retrieved bool to a retrieve_status integer. A value of

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate string descriptors The string descriptor length includes a two-bCVE-2026-92480 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate string descriptors The string descriptor length includes a two-byte header while the UTF-16 payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code units, not bytes. Passing the payload byte count can make it read beyond the descriptor buffer. Validate that the payload has an even byte count, pass a code-unit count to the converter, and allocate sufficient UTF-8 output space. The raw string buffer starts after the descriptor header but its size is bLength. Copying bLength bytes from that pointer can read beyond the response buffer. Allocate a zeroed bLength-sized buffer and copy only the UTF-16 payload. This preserves the raw buffer size consumed by the RPMB device-ID ABI while avoiding the overread.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate connected lane counts The connected lane count is used by TX equCVE-2026-92478 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate connected lane counts The connected lane count is used by TX equalization code to index arrays sized by UFS_MAX_LANES. Reject zero and out-of-range RX or TX lane counts before they can be propagated.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential UAF in bpf_netns_link_update_prog In bpf_netns_link_update_prog, the chCVE-2026-90393 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Fix potential UAF in bpf_netns_link_update_prog In bpf_netns_link_update_prog, the checks for old_prog and prog type are currently performed locklessly before acquiring netns_bpf_mutex. This creates a race condition that can lead to a UAF issue. If two threads concurrently execute BPF_LINK_UPDATE on the same netns link, the following execution path can trigger a UAF: CPU0 CPU1 bpf_netns_link_update_prog if (old_prog && old_prog != link->prog) return -EPERM; bpf_netns_link_update_prog if (old_prog && old_prog != link->prog) ... old_prog = xchg(&link->prog, new_prog); bpf_prog_put(old_prog); if (new_prog->type != link->prog->type) <-- trigger UAF Fix this by moving the old_prog and prog->type checks inside the netns_bpf_mutex critical section. Meanwhile, use guard() to simplify lock management and avoid all the goto jumping.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[] band_idx comes from aCVE-2026-90374 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[] band_idx comes from a 2-bit descriptor field (0-3) and was used directly to index dev->mt76.phys[] (size __MT_MAX_BAND == 3) and dereference the result. A corrupt or reserved descriptor value could index out of bounds or hit a NULL phy on parts with fewer bands. Reject invalid band indices, mirroring mt7996_rx_get_wcid().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: coreboot: Validate table bounds The existing coreboot_table_populate() bounds chCVE-2026-90341 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.7

  In the Linux kernel, the following vulnerability has been resolved: firmware: coreboot: Validate table bounds The existing coreboot_table_populate() bounds checks limit individual entries to the mapped length. However, coreboot_table_probe() replaces the platform resource length with header and table sizes supplied by firmware before mapping the full table. A malformed table can overflow the 32-bit size addition or advertise an extent beyond the resource, causing the driver to map and parse memory outside the resource. A resource shorter than the fixed header is also mapped as though it contained a complete header. Reject resources shorter than the fixed header. After validating the signature, require a complete header, calculate the advertised extent with overflow checking, and reject extents beyond the resource before remapping the table.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ublk: validate auto buf reg before taking uring_cmd With UBLK_F_AUTO_BUF_REG, invalid sqe-CVE-2026-90323 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ublk: validate auto buf reg before taking uring_cmd With UBLK_F_AUTO_BUF_REG, invalid sqe->addr can fail after ublk_fill_io_cmd() has set UBLK_IO_FLAG_ACTIVE. The uring_cmd is completed while the tag stays active, which can hang teardown. Split validation from buffer apply so the check has no side effects, then take the uring_cmd and store the already-validated buffer. Apply the same order in FETCH so io->buf is not written before __ublk_fetch() state checks.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline xattrs during inode block validation Patch series "ocfs2: validate CVE-2026-90321 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline xattrs during inode block validation Patch series "ocfs2: validate xattr entry bounds", v7. This series validates OCFS2 xattr entry name/value bounds when xattr metadata is read and validated, before getxattr() or listxattr() can walk out-of-range entry arrays or offsets from corrupted metadata. This patch (of 2): ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk metadata from it, but inline xattr metadata is still checked only in operation-specific consumers. The existing ibody lookup helper validates inline header placement and entry count, but inode block validation does not reject entry name/value bounds. Add a flat xattr entry validator and call it from inode block validation for inline xattrs. Keep the operation paths on their existing header/count lookup checks; the full entry bounds check now runs when the inode block is validated at read time. Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or listxattr() can walk past the inline storage. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_find_entr

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate external xattr entries when reading metadata ocfs2_validate_xattr_block() CVE-2026-90320 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate external xattr entries when reading metadata ocfs2_validate_xattr_block() checks the xattr block header before the block reaches higher-level xattr users, but it does not verify that a non-indexed block's xh_count and entry offsets fit inside the block. Indexed buckets likewise reach list/get consumers after ECC without an entry-bounds check. Use the flat xattr entry validator for non-indexed external xattr blocks, and use a bucket-specific validator for indexed buckets at metadata read time. The bucket validator keeps the entry array bounded by the first bucket block while checking name/value offsets against the bucket block they target. Reject corrupted external xattr metadata before listxattr() or getxattr() can walk out-of-range entry arrays or name/value offsets. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190 Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_list_entries+0xd7/0x190 ocfs2_listxattr+0x3f6/0

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Invalidate RCU pointers after final spin unlock In a sleepable BPF program, a spin loCVE-2026-90317 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Invalidate RCU pointers after final spin unlock In a sleepable BPF program, a spin lock can provide the only RCU protection for a kptr. The final bpf_spin_unlock() ends that protection, but the verifier leaves the pointer valid. Another CPU can then free the object before the pointer is used. A capability-limited runtime PoC triggered a task_struct use-after-free in __bpf_get_task_stack(). Record whether the program is in an RCU-protected context before releasing the lock. Invalidate RCU-protected pointers only when the unlock leaves the final such context. This preserves valid pointers in non-sleepable programs and inside an explicit RCU read-side section.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: retry verity reads for not-uptodate Merkle folios btrfs_read_merkle_tree_page() canCVE-2026-90262 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: btrfs: retry verity reads for not-uptodate Merkle folios btrfs_read_merkle_tree_page() can find a folio in the mapping that is not uptodate. After taking the folio lock, the current code treats that state as a read error and returns -EIO. That can make a previous transient read failure sticky. If the failed read left a not-uptodate folio in the mapping, later callers find that folio and fail instead of retrying the read. Keep the existing page-cache insertion and locking order, but retry the Merkle item read when a not-uptodate folio is found in the mapping. Also unlock the folio when read_key_bytes() fails so that a later caller can lock it and retry the read.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MSFT: validate evt_prefix_len against the response length read_supported_featurCVE-2026-90251 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MSFT: validate evt_prefix_len against the response length read_supported_features() only checks that the response covers the fixed part of struct msft_rp_read_supported_features, which is 11 bytes: if (skb->len < sizeof(*rp)) { bt_dev_err(hdev, "MSFT supported features length mismatch"); goto failed; } evt_prefix[] is a flexible array member and rp->evt_prefix_len is an unvalidated u8 taken straight out of that response, so msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len, GFP_KERNEL); copies up to 255 bytes from a reply that may have carried none of them. What is copied is data the controller never sent, and it is then used to match incoming vendor events in msft_vendor_evt(). This is not an out-of-bounds access. An skb data allocation always has at least SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) bytes past the payload, which is more than the 255 byte maximum, so the read stays inside the allocation and KASAN does not report it. It is still a read of bytes the host was never given, with the length fully controlled by the controller. Reject a response that is too s

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: apparmor: fix integer overflow in verify_tags() bounds check verify_tags() validates the tCVE-2026-90246 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: apparmor: fix integer overflow in verify_tags() bounds check verify_tags() validates the tagset table unpacked from a policy blob. For each set it reads a count and checks that advancing the index by that count stays inside sets.table[]: u32 cnt = tags->sets.table[i]; if (i+cnt >= tags->sets.size) { i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32. sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so every entry is a raw unbounded 32-bit word taken from the policy blob, and verify_tags() is the function that is supposed to validate it. A count close to U32_MAX makes the sum wrap to a small value, the guard passes, and the inner loop then walks sets.table[++i] past the end of the kcalloc(size, sizeof(u32)) allocation. Note that sets.size is bounded by 65535, because unpack_tagsets() reads it with aa_unpack_array() as a u16, so the wrap cannot be reached by growing the table; it is reached purely through the attacker-supplied count. With sets.size = 2 and sets.table = { 0, 0xffffffff }: i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run i = 1: cnt = 0xf

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: fbdev: kyro: Validate overlay viewport coordinates The overlay viewport end coordinates arCVE-2026-90245 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: fbdev: kyro: Validate overlay viewport coordinates The overlay viewport end coordinates are computed from the viewport origin and dimensions using 32-bit unsigned arithmetic. Large input values can cause these calculations to wrap around before the resulting coordinates are passed to SetOverlayViewPort(). SetOverlayViewPort() packs the viewport coordinates into 16-bit register fields. The X coordinates are additionally adjusted by +2 and +1 before being written. Validate the coordinate calculations for 32-bit wraparound and ensure that the adjusted coordinates fit within their 16-bit register fields before calling SetOverlayViewPort(). Found by Linux Verification Center (linuxtesting.org) with SVACE.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF in bpf_trampoline_multi_attach_free on update failure When bpf_trampoline_updCVE-2026-90210 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF in bpf_trampoline_multi_attach_free on update failure When bpf_trampoline_update() fails before modify_fentry_multi()/ unregister_fentry_multi() is called, cur_image is unchanged (cur_image == old_image) and ftrace still calls into it. Freeing old_image in that case causes a UAF. Only free old_image when it differs from cur_image.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate orphan slot during inode read Patch series "ocfs2: validate active orphan CVE-2026-90205 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate orphan slot during inode read Patch series "ocfs2: validate active orphan slots during inode read". OCFS2 trusts active ordinary and append-DIO orphan slots read from dinodes. A corrupted slot can therefore index osb_orphan_wipes or the slot-local system-inode cache outside their allocations before the corruption is reported. Patch 1 validates the ordinary orphan slot used by inode wipe processing. Patch 2 validates the append-DIO orphan slot used by DIO completion and orphan recovery. Both checks reject corrupt metadata at the existing inode validation boundary. This patch (of 2): [BUG] A corrupted dinode with OCFS2_ORPHANED_FL can carry an i_orphaned_slot outside the mounted filesystem slot range. ocfs2_wipe_inode() uses it to index osb_orphan_wipes before looking up the orphan directory, causing an out-of-bounds memory access. BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x29

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate DIO orphan slot during inode read [BUG] A corrupted append-DIO dinode (higCVE-2026-90204 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate DIO orphan slot during inode read [BUG] A corrupted append-DIO dinode (high byte at offset 0xa1 corrupted from 0 to 1) can carry an i_dio_orphaned_slot outside the mounted filesystem slot range and trigger a use-after-free error: BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840 ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline] ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295 evict+0x38e/0x8f0 fs/inode.c:810 iput_final fs/inode.c:1914 [inline] iput fs/inode.c:1966 [inline] iput+0x55b/0x8b0 fs/inode.c:1926 ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374 ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373 ... [CAUSE] ocfs2_del_inode_from_orphan() uses i_dio_orphaned_slot to index the slot-local system inode cache. The dinode validator does not check this active slot, so an out-of-range value produces an invalid cache entry poin

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: validate topology volume range before allocation SOF treats the topology mixer CVE-2026-90196 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: validate topology volume range before allocation SOF treats the topology mixer min and max values as non-negative indices into its volume table. It stores them in signed fields, allocates max + 1 entries through an int argument, and later indexes the table with the stored range. An inverted range is invalid, while a maximum at or above INT_MAX cannot be represented safely after the increment or in the signed fields. Validate the complete range before storing it or allocating the table.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: mailbox: riscv-sbi-mpxy: validate RPMI notification lengths The SBI return value controls CVE-2026-90191 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: mailbox: riscv-sbi-mpxy: validate RPMI notification lengths The SBI return value controls how many bytes are copied from shared memory into the RPMI notification buffer. It is not validated against the negotiated shared-memory size before that copy. The event walker also uses a reversed loop condition and can inspect a short event record. Validate the complete notification length before copying it, iterate only while a full event header remains, and stop when a declared event payload extends beyond the copied notification data.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: null_blk: serialize configfs attribute updates with device setup The attribute store methoCVE-2026-90184 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: null_blk: serialize configfs attribute updates with device setup The attribute store methods generated with NULLB_DEVICE_ATTR() refuse to change the configuration of a live device by testing NULLB_DEV_FL_CONFIGURED, but that flag is only set by nullb_device_power_store() after null_add_dev() has returned, and the store methods take no lock at all. configfs only serializes writes to the same open file (buffer->mutex), so a write to any attribute can run concurrently with null_add_dev() and change the device configuration while it is being used. null_add_dev() reads the configuration several times, e.g. dev->zoned is read once to set up the queue limits and once to initialize the zone resources: CPU0: echo 1 > nullb0/power CPU1: echo 1 > nullb0/zoned nullb_device_power_store() mutex_lock(&lock) null_add_dev() if (dev->zoned) -> false /* no BLK_FEAT_ZONED */ nullb_device_zoned_store() test_bit(FL_CONFIGURED) -> 0 dev->zoned = true blk_mq_alloc_disk() /* queue is not zoned */ i

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate ipc response length before dereferencing its fields ipc_validate_msg() comCVE-2026-90170 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate ipc response length before dereferencing its fields ipc_validate_msg() computes the expected message size by reading length fields out of the response buffer supplied by the userspace ksmbd daemon (payload_sz, session_key_len, ngroups, ...). Those fields are read before the buffer is verified to be large enough to contain the struct they belong to, so a short response makes the read land past the end of the allocation. handle_response() sizes entry->response purely from the netlink attribute length (nla_len()) and only guards the leading handle read, so the daemon can install a response as small as the kmalloc-8 object seen below. When ipc_msg_send_request() then calls ipc_validate_msg() for a KSMBD_EVENT_RPC_REQUEST, the cast to struct ksmbd_rpc_command reads resp->payload_sz at offset 8 of an 8-byte allocation: [ 3697.841381] ================================================================== [ 3697.844099] BUG: KASAN: slab-out-of-bounds in ipc_msg_send_request+0x763/0x800 [ 3697.846604] Read of size 4 at addr ffff888105f95910 by task kworker/4:3/20682 [ 3697.849061] [ 3697.849801] CPU: 4 UID

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size smb_check_perm_dacl() validates CVE-2026-90153 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size smb_check_perm_dacl() validates that the DACL fits inside the NT security descriptor, but then bounds its two ACE walks by the remaining NTSD length (acl_size) rather than the DACL's declared size (pdacl_size). When pdacl->size is smaller than the trailing NTSD buffer, bytes after the declared DACL boundary - still inside the stored security descriptor - are parsed as ACEs during access checks. A crafted DACL can place an access-granting ACE beyond pdacl->size, and the current code accepts it during SMB2_CREATE access validation, while parse_dacl() and smb_inherit_dacl() stop at pdacl_size. Bound both ACE walks by pdacl_size to match the DACL boundary semantics used elsewhere in the server. Validation: - semantic KUnit harness shows the post-boundary ACE is selected before the fix and rejected (EACCES) after it - linux master (7.2-rc6), x86_64

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf, xdp: move offload check into dev_xdp_install() bpf_xdp_link_update() calls dev_xdp_inCVE-2026-90146 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf, xdp: move offload check into dev_xdp_install() bpf_xdp_link_update() calls dev_xdp_install() directly and skips dev_xdp_attach(), so the checks in dev_xdp_attach() do not run. A user can make an XDP link with a normal program and then swap in an offloaded or device-bound program with BPF_LINK_UPDATE, which puts it on the software path. dev_xdp_install() is the one place all three paths go through: "ip link set xdp" and BPF_LINK_CREATE reach it via dev_xdp_attach(), and BPF_LINK_UPDATE calls it directly. So move the program checks (offloaded, bound to another device, device-bound in generic mode, native vs generic, DEVMAP and CPUMAP) there, and keep only the netlink-flag check (XDP_FLAGS_UPDATE_IF_NOEXIST) in dev_xdp_attach().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs: validate usa_ofs before preserving the update sequence number When ntfs_mft_record_aCVE-2026-90117 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ntfs: validate usa_ofs before preserving the update sequence number When ntfs_mft_record_alloc() reuses a free mft record it reads the old update sequence number straight from the on-disk record: usn = *(__le16 *)((u8 *)m + le16_to_cpu(m->usa_ofs)); Here m points into the raw $MFT page-cache folio, which still holds unvalidated, MST-protected bytes: the folio is read by a plain iomap_read_folio() and neither post_read_mst_fixup() nor ntfs_mft_record_check() has run on it (both work on private copies). m->usa_ofs is therefore an untrusted u16, and a corrupted record can put it past the end of the record so the two-byte read lands outside the folio. Reading such a record while creating a file gives, under KASAN: BUG: KASAN: use-after-free in ntfs_mft_record_alloc+... Read of size 2 at addr ... ntfs_mft_record_alloc -> __ntfs_create -> ntfs_create -> path_openat Only preserve the old update sequence number when usa_ofs is even and in range, mirroring the check ntfs_mft_record_check() already applies; otherwise leave usn zero, which the existing restore below skips.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: netdevsim: update queue NAPI association on queue reset In netdevsim, receive queues (struCVE-2026-90113 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: netdevsim: update queue NAPI association on queue reset In netdevsim, receive queues (struct nsim_rq) embed their own struct napi_struct. When queue reset is performed (e.g. via queue_reset debugfs), nsim_queue_start() swaps in a newly allocated struct nsim_rq, and nsim_queue_mem_free() later deletes and frees the old one. However, nsim_queue_start() failed to update the queue-to-NAPI mapping via netif_queue_set_napi(). As a result, dev->_rx[idx].napi continued to point to the old NAPI struct. After the old queue was freed, a subsequent queue dump via Netlink (NETDEV_CMD_QUEUE_GET) triggered a KASAN slab-use-after-free read in nla_put_napi_id() when accessing rxq->napi->napi_id. Fix this by calling netif_queue_set_napi() in nsim_queue_start() to associate the new NAPI with the RX queue, and clear the association with netif_queue_set_napi(..., NULL) in nsim_del_napi() during teardown.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net: qlcnic: validate unified ROM sections before loading The unified ROM parser reads dirCVE-2026-90112 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: qlcnic: validate unified ROM sections before loading The unified ROM parser reads directory, product, and data-descriptor fields from the firmware file. Existing validation forms table and data ends with unchecked additions and multiplications. Malformed values can wrap before they are compared with the firmware size. The parser also dereferences typed pointers at firmware-controlled offsets. Valid descriptor extents alone are insufficient for the consumers. The loader reads a fixed-size bootloader regardless of its declared size, the version parser assumes a 17-byte tail, and a partial final firmware word is read as a full u64. A truncated image can therefore make the driver read beyond the firmware allocation during validation or loading. Replace the pointer-returning parser with bounded range helpers. Validate table entry sizes, descriptor indices, section ranges, the fixed bootloader load length, and the version tail before exposing any section. Read all file fields with unaligned little-endian accessors and assemble a partial final word from only the bytes that remain. Apply the same range chec

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: fuse: invalidate the correct range after O_APPEND direct write fuse_direct_write_iter() caCVE-2026-90096 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: fuse: invalidate the correct range after O_APPEND direct write fuse_direct_write_iter() captures pos before generic_write_checks(), which moves ki_pos to EOF for O_APPEND writes: fuse_direct_write_iter() { pos = iocb->ki_pos; /* 0 (user-supplied) */ generic_write_checks(); /* ki_pos -> EOF */ fuse_direct_io(); /* writes at EOF, correct */ invalidate(pos, pos + res); /* [0, res) -- wrong */ } The post-write invalidation targets a stale range instead of the actual written range at EOF. This can cause data inconsistency when the file size is not page-aligned. The tail page straddling EOF has a valid portion before EOF that concurrent readers can fault back in during the DIO write window: Tail page (file size X not page-aligned): page_start X (EOF) page_end |--- valid data ----|-- stale --| CPU0 (O_APPEND DIO writer) CPU1 (buffered reader) -------------------------- ---------------------- invalidate [X, X+len) tail page evicted FUSE_WRITE in flight ... read [p

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Validate the FW dump header length nxp_process_fw_dump() pulls the ACVE-2026-90089 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Validate the FW dump header length nxp_process_fw_dump() pulls the ACL header off the frame and then reads seq_num and buf_len from a struct nxp_fw_dump_hdr placed at skb->data, without checking that the ACL payload is long enough to contain it. h4_recv_buf() collects HCI_ACL_HDR_SIZE bytes of header followed by the number of payload bytes named in that header, so skb->len is 4 + dlen with dlen supplied by the controller and possibly smaller than the 8 byte dump header, or zero. A short frame with connection handle 0xfff therefore reads both fields from beyond the received data. Beyond the read itself, buf_len is what terminates a dump: a value of zero makes the driver call hci_devcd_complete() and reset the controller, so a truncated frame can end a dump early. Use skb_pull_data() to validate and pull the FW dump header before accessing its fields. Warn and reject the chunk if the header is truncated.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop rfcomm_applyCVE-2026-90088 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Validate MTU in rfcomm_apply_pn() to prevent infinite loop rfcomm_apply_pn() accepts the MTU value from a remote PN (Parameter Negotiation) frame without checking for zero. When the remote peer sends an MTU of zero, d->mtu is set to 0. This causes the sendmsg path to enter an infinite loop when fragmenting data, as each fragment has size == min_t(size_t, len, 0) == 0, so the remaining length never decreases. The infinite allocation of zero-length skbs exhausts all system memory. Fix by clamping d->mtu to RFCOMM_DEFAULT_MTU when the negotiated value is zero, consistent with the initial value assigned in rfcomm_dlc_alloc().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in rds_cong_map_updated() rds_cong_map_updated() runs after CVE-2026-90081 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in rds_cong_map_updated() rds_cong_map_updated() runs after a peer's congestion map has been rewritten (by rds_tcp_cong_recv() and rds_ib_cong_recv(), or the clear-all in the loopback and IB send-completion paths). It bumps rds_cong_generation and then checks waitqueue_active() on map->m_waitq and on rds_poll_waitq to decide whether anyone needs waking. atomic_inc() carries no ordering and waitqueue_active() is a plain load, so nothing orders the map and generation stores before the wait queue reads. The waiters do the mirror image: rds_cong_wait() adds itself to m_waitq and then tests the port bit, and rds_poll() registers on rds_poll_waitq and then reads the generation. That is the store-buffering pattern described above waitqueue_active() in include/linux/wait.h - the updater can observe an empty wait queue while the waiter still observes the port as congested, and no wake-up is issued. rds_cong_wait() is an interruptible sleep with no timeout, so a sender blocked on a congested port stays blocked until the next congestion update from that peer arrives or a signal is delivere

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: libceph: validate banner payload length When parsing the Ceph messenger v2 protocol bannerCVE-2026-90067 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: libceph: validate banner payload length When parsing the Ceph messenger v2 protocol banner, the `payload_len` field is decoded from the banner prefix. If a client sends a banner with a `payload_len` of 0, the kernel sets up a 0-length socket read. This violates an invariant in the state machine, triggering a warning in `populate_in_iter()`: ------------[ cut here ]------------ !iov_iter_count(&con->v2.in_iter) WARNING: net/ceph/messenger_v2.c:3129 at populate_in_iter net/ceph/messenger_v2.c:3129 [inline], CPU#1: kworker/1:3/5070 WARNING: net/ceph/messenger_v2.c:3129 at ceph_con_v2_try_read+0x6634/0x6810 net/ceph/messenger_v2.c:3159, CPU#1: kworker/1:3/5070 ... Call Trace: <TASK> ceph_con_workfn+0x1f5/0x14a0 net/ceph/messenger.c:1575 process_one_work kernel/workqueue.c:3322 [inline] process_scheduled_works+0xa8e/0x14e0 kernel/workqueue.c:3405 worker_thread+0xa47/0xfb0 kernel/workqueue.c:3486 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> According to the msgr2 protocol specification, the b

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026BlueKitchen BTstack through 1.8.2 fails to validate the peer-reported endpoint count against table bounds in A2DP stream endpoint discovery.CVE-2026-93015 · Other software · BlueKitchen GmbH · reported by VulnCheckHigh 7

  BlueKitchen BTstack through 1.8.2 fails to validate the peer-reported endpoint count against table bounds in A2DP stream endpoint discovery. A bonded peer can send an AVDTP DISCOVER response with more endpoints than the fixed table holds, causing out-of-bounds writes that corrupt adjacent static objects and crash the process or sever event delivery.

  Product

  BTstack

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 17, 2026RosarioSIS versions before 12.9 fail to validate the filename request parameter in Users and Students modules, allowing authenticated users to unlink allow-listCVE-2026-93014 · Other software · RosarioSIS · reported by VulnCheckHigh 7.1

  RosarioSIS versions before 12.9 fail to validate the filename request parameter in Users and Students modules, allowing authenticated users to unlink allow-listed files via path traversal. Attackers can use parent-directory sequences to escape upload directories and delete CSS, XML, JSON resources and other users' documents throughout the installation.

  Product

  RosarioSIS

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgist.github.comgitlab.com

• Sep 17, 2026pgAdmin 4's File Manager save_file endpoint, which backs saving from the Query Tool and ERD, validated the requested path with Filemanager.check_access_permissiCVE-2026-86861 · Other software · pgadmin.org · reported by f86ef6dc-4d3a-42ad-8f28-e6d5547a5007Medium 6

  pgAdmin 4's File Manager save_file endpoint, which backs saving from the Query Tool and ERD, validated the requested path with Filemanager.check_access_permission() and then opened the file for writing with a plain open() call. CVE-2026-7819 had previously hardened the separate file upload path by opening its target with O_NOFOLLOW, so that the kernel refuses to follow a symbolic link at the final path component, but save_file was left on an unprotected open(). A symbolic link already present when the check ran was rejected by the check itself; the remaining exposure was a link substituted at the final path component in the interval between the check and the write, at which point the write followed the link and landed outside the user's storage directory, creating or overwriting an arbitrary file as the operating-system account running pgAdmin. Exploitation requires the ability to create or replace a symbolic link inside the requesting user's storage directory. pgAdmin exposes no interface that creates symbolic links, so this requires filesystem access to the pgAdmin host or to a shared or network-mounted storage backend, together with winning the timing window. The reporter did n

  Product

  pgAdmin 4

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.com

• Sep 17, 2026Mattermost Desktop App versions <=6.2 6.2.2.0 fail to validate the URL scheme when checking whether a target URL is internal to the connected server, which alloCVE-2026-75588 · Other software · Mattermost · reported by responsibledisclosure@mattermost.comLow 2.6

  Mattermost Desktop App versions <=6.2 6.2.2.0 fail to validate the URL scheme when checking whether a target URL is internal to the connected server, which allows a network-positioned attacker to load a plugin popout window over an insecure connection via a link using a downgraded URL scheme. Mattermost Advisory ID: MMSA-2026-00717

  Product

  Mattermost

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordmattermost.com

• Sep 17, 2026Dell Server Update Utility, versions prior to 26.07.01, contains an Uncontrolled Search Path Element vulnerability.CVE-2026-56795 · Other software · Dell · reported by security_alert@emc.comHigh 8.2

  Dell Server Update Utility, versions prior to 26.07.01, contains an Uncontrolled Search Path Element vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Code execution.

  Product

  Driver Pack For Windows OS

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recorddell.com

• Sep 17, 2026Mattermost Desktop App versions <=6.2 6.2.2.0 fails to validate the IPC sender in the leaveCall handler which allows a malicious or compromised Mattermost serveCVE-2026-12284 · Other software · Mattermost · reported by responsibledisclosure@mattermost.comLow 3.7

  Mattermost Desktop App versions <=6.2 6.2.2.0 fails to validate the IPC sender in the leaveCall handler which allows a malicious or compromised Mattermost server (or a user with script access to a connected server view) to disconnect an active call belonging to a different connected server via the desktopAPI.leaveCall IPC message. Mattermost Advisory ID: MMSA-2026-00699

  Product

  Mattermost

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordmattermost.com

• Sep 17, 2026ansi2html versions 1.7.0a0 through 1.9.3 contain a cross-site scripting vulnerability in OSC 8 hyperlink handling that fails to validate or escape URL targets.CVE-2026-92973 · Other software · pycontribs · reported by VulnCheckMedium 5.3

  ansi2html versions 1.7.0a0 through 1.9.3 contain a cross-site scripting vulnerability in OSC 8 hyperlink handling that fails to validate or escape URL targets. Attackers controlling ANSI text input can inject javascript: schemes or terminate href attributes to execute arbitrary scripts in the context of pages displaying converted output.

  Product

  ansi2html

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 17, 2026admin3 through 3.0.0 fails to invalidate existing sessions when disabling a user account, allowing attackers to retain authenticated access with original permisCVE-2026-92920 · Other software · cjbi · reported by VulnCheckMedium 5.3

  admin3 through 3.0.0 fails to invalidate existing sessions when disabling a user account, allowing attackers to retain authenticated access with original permissions. Attackers can continue using bearer tokens issued before account disablement to authenticate requests, as the AuthInterceptor never re-validates the user's locked status and session expiry resets on each request.

  Product

  admin3

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 17, 2026Checkout Field Manager (Checkout Manager) for WooCommerce: Does not properly validate the ownership of an attachment before deleting itCVE-2026-87831 · WordPress plugins & themes · reported by WPScanMedium 4.3

  The Checkout Field Manager (Checkout Manager) for WooCommerce WordPress plugin before 7.9.7 does not properly validate the ownership of an attachment before deleting it, allowing any authenticated user such as a customer to delete arbitrary media attachments belonging to other users.

  Product

  Checkout Field Manager (Checkout Manager) for WooCommerce

  Fixed in

  7.9.7

  What to do

  Update Checkout Field Manager (Checkout Manager) for WooCommerce to 7.9.7 or newer.

  Full record and what to do →NVD recordwpscan.com

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.