Critical security advisoryCriticalFlagged by our vulnerability database: PHP2Shell is on CISA’s exploited list. Most WordPress hosting runs PHP. See if your site is affectedFlagged by our vulnerability database: PHP2Shell is being exploited. DetailsExploited: PHP2Shell. Check your site
HuttenlocherTechnologies
Updated 8 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,764exploited flaws on CISA’s list
35added in the last 30 days
456new WordPress flaws this week
390,714entries in the database

22,380 results · page 12 of 448

  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix initial port reference race For RFCOMM_RELEASE_ONHUP devices, rfcomCVE-2026-98739 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix initial port reference race For RFCOMM_RELEASE_ONHUP devices, rfcomm_tty_install() and __rfcomm_release_dev() both use RFCOMM_TTY_OWNED to decide who drops the initial tty_port reference. The release path tests the bit separately from the install path setting it, so both can drop that reference. The synchronous hangup does not prevent this race: port->tty is not assigned until tty_port_open(), after installation. The following interleaving is possible: 1. Install and release each obtain a reference with rfcomm_dev_get(). 2. Release observes RFCOMM_TTY_OWNED clear. 3. Install sets RFCOMM_TTY_OWNED and drops the initial reference. 4. Release drops the same initial reference again. 5. TTY cleanup drops its reference and frees the device. 6. Release performs its final tty_port_put() on the freed port. KASAN reported: BUG: KASAN: slab-use-after-free in tty_port_put+0x22/0x190 Write of size 4 at addr ffff8881001d3d5c by task poc/92 Call Trace: tty_port_put+0x22/0x190 rfcomm_dev_ioctl+0x1d4/0x1930 sock_do_ioctl+0x110/0x260 sock_ioctl+0x380/0x590 __x64_sys_ioct

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Serialize SMP remote OOB data access build_pairing_cmd() looks up remote OOB daCVE-2026-98738 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Serialize SMP remote OOB data access build_pairing_cmd() looks up remote OOB data and copies its contents without holding hdev->lock, which serializes the list's writers. After SMP finds an entry, a concurrent management Remove Remote OOB Data command can unlink and free it before SMP reads its present flag or copies its random and confirmation values. Removal can also invalidate an entry while the lookup is still traversing the list. KASAN reported: BUG: KASAN: slab-use-after-free in build_pairing_cmd+0x948/0x9b0 Call Trace: build_pairing_cmd+0x948/0x9b0 smp_recv_cb+0x459f/0x8110 l2cap_recv_frame+0xf14/0x9190 l2cap_recv_acldata+0xa64/0xd40 hci_rx_work+0x4ca/0x730 Allocated by task 87: hci_add_remote_oob_data+0x11d/0x530 add_remote_oob_data+0x282/0x400 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 93: hci_remote_oob_data_clear+0x108/0x1c0 remove_remote_oob_data+0x198/0x220 hci_sock_sendmsg+0x1033/0x1ea0 Taking hdev->lock in build_pairing_cmd() would recurse for callers that already hold it and invert the device-to-L2CAP lock order on the receive path. Add a

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix inquiry cache use-after-free The sync command worker holds hdev->CVE-2026-98737 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix inquiry cache use-after-free The sync command worker holds hdev->req_lock, but inquiry-cache updates and flushes use hdev->lock. Both hci_acl_create_conn_sync() and hci_stop_discovery_sync() look up entries and read their fields without taking hdev->lock. After either lookup returns, a concurrent HCIINQUIRY ioctl can acquire hdev->lock and flush the cache, freeing the entry. The worker then reads the freed entry while preparing a create-connection or remote-name-cancel command. The list traversal also races with cache updates and removal. KASAN reported these accesses: BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0x5f1/0x650 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_acl_create_conn_sync+0x5f1/0x650 hci_cmd_sync_work+0x13c/0x290 Allocated by task 90: hci_inquiry_cache_update+0x3e6/0x7d0 hci_inquiry_result_evt+0x3cb/0x560 Freed by task 93: hci_inquiry_cache_flush+0x111/0x2b0 hci_inquiry+0x2f2/0x780 hci_sock_ioctl+0x269/0x5f0 BUG: KASAN: slab-use-after-free in hci_stop_discovery_sync+0x3b1/0x3c0 Workqueue: hci0 hci_cmd_sync_work

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Lock parent access during enhanced SCO setup Bluetooth: hci_conn: LocCVE-2026-98736 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: Lock parent access during enhanced SCO setup Bluetooth: hci_conn: Lock parent access during enhanced SCO setup hci_enhanced_setup_sync() runs on the request workqueue without the hci_dev_lock held by its caller when setup was queued. Its CVSD capability check and find_next_esco_param() dereference conn->parent while the receive workqueue can unlink and release that parent. The following interleaving can cause a use-after-free: hci_enhanced_setup_sync() hci_disconn_complete_evt() load conn->parent hci_dev_lock() hci_conn_del(ACL parent) unlink SCO child drop link's parent reference clear child->parent release ACL parent bt_link_release() kfree(parent) hci_dev_unlock() read parent->features[0][3] The reference held for the queued SCO child does not keep its ACL parent a

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize ACL scheduling with channel deletion hci_chan_sent() selectCVE-2026-98735 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize ACL scheduling with channel deletion hci_chan_sent() selects a channel under RCU but drops the read lock before accessing chan->conn and returning the channel. The ACL and LE schedulers then use its packet queue and update its transmit counters without any protection against channel deletion. After TX selects a channel and releases RCU, a disconnect command timeout on the separate request workqueue can run hci_conn_failed() and l2cap_conn_del(). hci_chan_del() can then unlink the channel, complete synchronize_rcu(), purge its queue and free it before TX resumes. This causes use-after-free both in hci_chan_sent() and in its callers. KASAN reported: BUG: KASAN: slab-use-after-free in hci_chan_sent+0x892/0x9b0 Workqueue: hci0 hci_tx_work Call Trace: hci_chan_sent+0x892/0x9b0 hci_tx_work+0x5e6/0xb70 Allocated by task 91: hci_chan_create+0xe3/0x350 l2cap_conn_add.part.0+0x12/0xa30 l2cap_chan_connect+0x110d/0x1b60 l2cap_sock_connect+0x310/0x530 Freed by task 99: hci_chan_del+0x11f/0x170 l2cap_conn_del+0x4f1/0x800 l2cap_connect_cfm+0x88c/0xd30 hci

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown hci_low_sent() selectsCVE-2026-98734 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize SCO and ISO scheduling with teardown hci_low_sent() selects a connection under RCU but drops the read lock before calculating its quota and returning it to the scheduler. The connection is then used without lifetime protection by hci_sched_iso() and hci_sched_sco(). After the TX worker drops the RCU read lock, hci_abort_conn_sync() on hdev->req_workqueue can remove the connection from the hash, complete synchronize_rcu(), purge its queues and release it. The TX worker on hdev->workqueue can then access the freed connection in hci_quote_sent() or while dequeuing packets and updating conn->sent. KASAN reported: BUG: KASAN: slab-use-after-free in hci_low_sent+0x730/0x840 Workqueue: hci0 hci_tx_work Call Trace: hci_low_sent+0x730/0x840 hci_sched_iso+0x25e/0x4d0 hci_tx_work+0x239/0xcb0 Allocated by task 93: __hci_conn_add+0x16f/0x1b40 hci_bind_bis+0x782/0x17b0 hci_connect_bis+0xa0/0x510 iso_sock_connect+0x589/0x1050 Freed by task 88: kfree+0x131/0x3c0 device_release+0xc8/0x240 kobject_put+0x14d/0x280 hci_conn_del+0x55a/0xe80 hci_disconne

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize fragmented ISO packet queueing The fragmented path in hci_qCVE-2026-98733 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Serialize fragmented ISO packet queueing The fragmented path in hci_queue_iso() calls __skb_queue_tail() without holding conn->data_q.lock. The socket lock serializes senders, but the transmit worker can concurrently remove packets from this queue using skb_dequeue(). After an insertion saves the old tail pointer, hci_sched_iso() can dequeue that packet and pass it to the driver. The driver can free the packet before the insertion resumes and writes to the old tail's next pointer, causing a use-after-free. Concurrent updates can also corrupt the queue. KASAN reported: BUG: KASAN: slab-use-after-free in hci_send_iso+0xc7d/0xe10 Call Trace: hci_send_iso+0xc7d/0xe10 iso_sock_sendmsg+0x710/0x900 __sys_sendto+0x34a/0x3a0 Allocated by task 86: __alloc_skb+0xdd/0x820 alloc_skb_with_frags+0x7e/0x770 sock_alloc_send_pskb+0x67a/0x820 bt_skb_sendmsg.constprop.0+0xc0/0x6c0 iso_sock_sendmsg+0x44e/0x900 Freed by task 90: kmem_cache_free+0xcb/0x3d0 vhci_read+0x33f/0x4d0 vfs_read+0x177/0xa20 Hold the queue lock across the entire fragment batch, as hci_queue_acl(

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: fix buffer over-read in btintel_hw_error() The "Exception info %s" priCVE-2026-98732 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: fix buffer over-read in btintel_hw_error() The "Exception info %s" print uses skb->data + 1, but the 12-byte payload is not guaranteed to be NUL-terminated and can be read past its end. Bound the print with "%.*s" and skb->len - 1.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix plen overflow in btintel_pcie_recv_frame() plen is u16 and coCVE-2026-98731 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix plen overflow in btintel_pcie_recv_frame() plen is u16 and computed as HDR_SIZE + dlen. For ACL/ISO frames dlen is a 16-bit field, so a value >= 0xFFFC wraps the sum, bypassing the "skb->len < plen" check and letting skb_trim() truncate the packet. Widen plen to u32 so the addition cannot wrap.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: reject oversized TX packets in send_frame() btintel_pcie_send_fraCVE-2026-98730 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: reject oversized TX packets in send_frame() btintel_pcie_send_frame() eventually copies skb->data into a fixed BTINTEL_PCIE_BUFFER_SIZE (4096) DMA buffer via memcpy() in btintel_pcie_prepare_tx(), with a 4-byte PCIe type header prepended. A user-space process with HCI_CHANNEL_USER access can inject an oversized packet and overflow the buffer. Reject packets larger than BTINTEL_PCIE_BUFFER_SIZE - BTINTEL_PCIE_HCI_TYPE_LEN on entry.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: x86/mm: Don't apply va_align to hugetlb mappings on AMD F15h get_align_mask() returns hugeCVE-2026-98729 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: x86/mm: Don't apply va_align to hugetlb mappings on AMD F15h get_align_mask() returns huge_page_mask_align() for hugetlbfs, but get_align_bits() adds va_align.bits regardless, so vm_unmapped_area() returns an address off the huge page boundary and __unmap_hugepage_range() hits BUG_ON(start & ~huge_page_mask(h)) at teardown. This can be triggered on Carrizo and FX-8370E, both hstates. Pass the file to get_align_bits() and skip the randomisation for hugetlbfs. [ bp: Massage commit message. ]

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: tpm: fix off-by-four bounds check in tpm2_get_random() When the response carries the TPM2_CVE-2026-98728 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: tpm: fix off-by-four bounds check in tpm2_get_random() When the response carries the TPM2_ST_SESSIONS tag, tpm2_get_random() skips the 4-byte parameter size field before locating the random data, but the bounds check still validates the response length against TPM_HEADER_SIZE. A truncated response can pass the check and make memcpy() read up to 4 bytes past the response end, so stale buffer contents end up in the caller's random bytes. Fix this by checking the response length against 'offset', which already includes the skipped parameter size field.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: set BLK_FEAT_ZONED only after the zone info is known The namespace head isCVE-2026-98727 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: set BLK_FEAT_ZONED only after the zone info is known The namespace head is marked zoned at allocation time based only on the command set identifier. If the zone info query reports a zero zone size, the path namespace is registered without zoned limits while the head still advertises the zoned capability with a zone size of zero, and reporting zones or writing to the head then shifts by ilog2(0). Drop the zoned feature from the head allocation and let the head limits refresh stack it in from the path namespace instead.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix underflow in ANA log bounds checks The number of ANA groups advertisedCVE-2026-98726 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix underflow in ANA log bounds checks The number of ANA groups advertised through Identify Controller sizes the ANA log buffer. The ANA log header and group descriptors independently supply the number of groups and namespace IDs to parse. Both bounds checks subtract an untrusted object size from ana_log_size before comparing the current offset. If the object is larger than the buffer, the size_t subtraction underflows and lets the parser read beyond ana_log_buf. Check the current offset before the first subtraction and compare each object size with the remaining buffer instead. This rejects inconsistent ANA data before dereferencing a truncated group descriptor or walking an oversized namespace ID array.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: fix out-of-bounds write in nvmet_auth_challenge() nvmet_auth_challenge() receiCVE-2026-98725 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: fix out-of-bounds write in nvmet_auth_challenge() nvmet_auth_challenge() receives its output buffer as a void pointer. sizeof(*d) therefore evaluates to one with GCC and undercounts the fixed challenge header by 15 bytes. A short AUTH_RECEIVE buffer can pass the check before the challenge is copied past the end of its allocation. Use the typed challenge pointer when calculating the response size. BUG: KASAN: slab-out-of-bounds in nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:442 drivers/nvme/target/fabrics-cmd-auth.c:569) Write of size 32 by task kworker/1:1H/64 Workqueue: nvmet_tcp_wq nvmet_tcp_io_work Call Trace: nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:442 drivers/nvme/target/fabrics-cmd-auth.c:569) nvmet_tcp_try_recv_pdu (drivers/nvme/target/tcp.c:1119 drivers/nvme/target/tcp.c:1243) nvmet_tcp_io_work (drivers/nvme/target/tcp.c:1350 drivers/nvme/target/tcp.c:1382 drivers/nvme/target/tcp.c:1445) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486) kthread (kernel/kthread.c:436

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: reject too-short SGL segments The host controls an SGL segment's length.CVE-2026-98724 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: reject too-short SGL segments The host controls an SGL segment's length. A nonzero length smaller than one SGL descriptor makes nr_descs zero, so nvmet_pci_epf_get_sgl_segment() reads the type byte of sgls[-1] outside the allocated buffer. If that byte contains a segment descriptor type, the function also copies the preceding 16 bytes and returns a negative descriptor count. The read was reproduced in 3/3 KASAN boots with only the host transfer mocked by a KUnit test: BUG: KASAN: slab-out-of-bounds in nvmet_pci_epf_get_sgl_segment Read of size 1 by task kunit_try_catch Call Trace: nvmet_pci_epf_get_sgl_segment nvmet_pci_epf_short_sgl_test Kernel panic - not syncing: KASAN: panic_on_warn set ... Reject segments that cannot hold one descriptor before allocating or transferring their contents.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet: copy the hostid into the ctrl before creating PR pc_refs Commit 6202783184bf ("nvmeCVE-2026-98723 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvmet: copy the hostid into the ctrl before creating PR pc_refs Commit 6202783184bf ("nvmet: Improve nvmet_alloc_ctrl() interface and implementation") added a second uuid_copy() of args->hostid near the end of nvmet_alloc_ctrl(), and commit 7b658153f1b8 ("nvmet: Remove duplicate uuid_copy") removed the original copy that sat before nvmet_ctrl_init_pr() instead of the new one. Since then nvmet_ctrl_init_pr() snapshots ctrl->hostid into the per-controller per-namespace reservation refs while the uuid_copy() from the connect data runs later, after the controller is published. The ctrl is allocated with kzalloc(), so every pc_ref created on this path stores the nil UUID. pc_ref->hostid has a single consumer: nvmet_pr_set_ctrl_to_abort() matches it against the preempted registrant's hostid to kill and drain the victim's in-flight I/O for Preempt and Abort. The match can never hit with the nil UUID, so whenever a namespace with reservations enabled exists before a host connects, which includes every reconnect, Preempt and Abort silently degrades into a plain Preempt: the preempting host sees success while the victim

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: mtd: block2mtd: Fix divide error when erase_size is zero The erase size is parsed from theCVE-2026-98722 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: mtd: block2mtd: Fix divide error when erase_size is zero The erase size is parsed from the "block2mtd" module parameter and can be set to zero. add_device() then evaluates if (size % erase_size) with a zero divisor, which triggers a divide error: divide error: 0000 [#1] PREEMPT SMP PTI RIP: 0010:add_device drivers/mtd/devices/block2mtd.c:296 [inline] RIP: 0010:block2mtd_setup2+0x592/0xda0 drivers/mtd/devices/block2mtd.c:459 Call Trace: block2mtd_setup+0x27/0xe0 drivers/mtd/devices/block2mtd.c:476 param_attr_store+0x214/0x310 kernel/params.c:589 module_attr_store+0x65/0x90 kernel/params.c:904 kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345 ... Reject a zero erase size before performing the modulo operation so the existing "erasesize must be a divisor of device size" error path reports the invalid argument and frees the device.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ The Cadence NAND interruCVE-2026-98721 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ The Cadence NAND interrupt handler uses both the IRQ lock and completion object. Registering the IRQ before initializing them leaves a window in which a pending interrupt can access uninitialized synchronization state. Initialize them before registering the handler.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified Force a refreshCVE-2026-98720 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the runtime eVMCS controls (pin, primary, secondary, etc.) are being updated. If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and then runs the same L2 with TPR virtualization disabled, KVM will fail to refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or L1 by proxy) read and write L0's TPR.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Nullify "have run CPUs" mask pointer when freeing it Nullify have_run_cpus when CVE-2026-98719 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Nullify "have run CPUs" mask pointer when freeing it Nullify have_run_cpus when freeing the mask, particularly in the error path of __sev_guest_init(), so that KVM doesn't have to subtly use sev->active to track whether or not the mask has been freed. As pointed out by Sashiko, blindly freeing the mask in sev_vm_destroy() results in a double-free if the mask is freed if __sev_guest_init() fails. Throw the logic in a helper as nullifying the pointer is frustratingly difficult and weird due to have_run_cpus being a single-entry array when CPUMASK_OFFSTACK=n. Deliberately don't use CPUMASK_VAR_NULL, as it's not directly assignable when the cpumask is on-stack, e.g. requires using a local variable and a memcpy(), which is beyond ridiculous. Furthermore, while clearing the on-stack bitmask is an unnecessary and arguably unwanted side effect, KVM absolutely relies on '0' being the "null" value given that the struct is zero-allocated. Opportunistically add an alloc() helper to pair with free(); there are just enough call sites to make doing so worthwhile.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do cache maintenance on the source VM *before* clearing SEV state Explicitly fluCVE-2026-98718 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Do cache maintenance on the source VM *before* clearing SEV state Explicitly flush caches after intra-host migration before clearing "SEV active" on the source VM, as doing cache maintenance afterwards creates a tiny window where memory reclaim could return memory to the host without performing a cache flush, e.g. as pointed out by Sashiko: CPU1 in sev_migrate_from(): src->active = false; CPU2 running concurrent unmap: Since active is false, the automatic cache flush in sev_guest_memory_reclaimed is skipped. The host frees and reallocates the page. CPU1 in sev_migrate_from(): sev_writeback_caches(src_kvm); Executes a hardware cache flush (wbnoinvd), which writes the guest's old dirty ciphertext over the new page owner's data.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bail from shadow walks if the root is invalid or a dummy When walking shadowCVE-2026-98717 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Bail from shadow walks if the root is invalid or a dummy When walking shadow page tables, immediately terminate the walk if the root is a "dummy" root, i.e. a root whose top-level page table is backed by the zero page, but otherwise doesn't exist. If memslot creation races with a stage-2 page fault (EPT violation or #NPF) from L2, then if the stars align, KVM will attempt to walk shadow page tables using the zero page and hit a NULL pointer deref. BUG: kernel NULL pointer dereference, address: 0000000000000021 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP CPU: 30 UID: 1000 PID: 941 Comm: qemu Not tainted 7.2.0-rc2-1b731e5ded48-next-vm #1741 PREEMPTLAZY Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__kvm_mmu_invalidate_addr+0xea/0x210 [kvm] Call Trace: <TASK> kvm_mmu_invalidate_addr+0x92/0xe0 [kvm] __kvm_inject_emulated_page_fault+0x67/0x80 [kvm] ept_page_fault+0x160/0x850 [kvm] kvm_mmu_do_page_fault+0x102/0x1f0 [kvm] kvm_mmu_page_fault+0x8e/0x6b0 [

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted Use the MSRCVE-2026-98716 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted Use the MSR permission bitmap of the active VMCB instead of assuming that KVM is always using vmcb02's bitmap when L2 is active, as KVM uses msrpm02 if and only if L1 wants to intercept MSR accesses, i.e. if and only if KVM needs to merge msprm01 with msrpm12. Don't bother tracking the virtual address of the bitmap that's being used, as __va() is cheap on x86, and caching the virtual address would introduce yet another source of potentially stale information.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Preserve TLB control (i.e.CVE-2026-98715 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Preserve TLB control (i.e. pending TLB flush) on failed VMRUN Don't reset the VMCB's TLB control back to "do nothing" on a failed VMRUN, as empirical testing shows that the CPU performs the requested TLB flush if and only if VMRUN is successful, i.e. clearing TLB control on a failed VMRUN effectively drops a TLB flush. Explicitly track the need to flush all ASIDs on a per-CPU basis, as the ASID reuse condition is tied to the pCPU, not to the vCPU. As a bonus, this also obviates the need to avoid clobbering FLUSH_ALL_ASID with TLB_CONTROL_FLUSH_ASID, e.g. in svm_flush_tlb_asid(). Deliberately don't bother saving/restoring the "old" tlb_ctl on failure, in quotes because it's not exactly the old tlb_ctl, it's the tlb_ctl from after pre_svm_run(), but before updating tlb_ctl for flush_all_asids. If VMRUN fails and TLB_CONTROL_FLUSH_ALL_ASID is forced, then the next successful run of the VMCB *may* unnecessarily flush all ASIDs, which strictly speaking could result in noisy neighbor issues. However, the fact that new_asid() is already guest-triggerable, because of KVM's flawed behavior of clearing the A

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded Leave control.erCVE-2026-98714 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Update control fields on #VMEXIT if and only if VMRUN succeeded Leave control.erap_ctl and control.clean as-is in the VMCS if VMRUN fails, because as per AMD: there's no explicit architectural guarantee about the behavior in the presence of VMRUN failures. So the best thing to do would be to assume that if VMRUN fails, the actions requested in the control fields may not have been performed.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Apply the fine-grained UNDEFs without FEAT_FGT FGUs don't actually require harCVE-2026-98713 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Apply the fine-grained UNDEFs without FEAT_FGT FGUs don't actually require hardware support, so don't gate fgt trap config insertion on FGT. This is the only action required to allow FGUs always, as kvm_calculate_traps() already computes the FGU bits with or without FEAT_FGT. This also fixes a spurious WARN when a TLBI OS is run on a guest in vEL1 without FEAT_TLBIOS on non FEAT_FGT hardware. In this configuration the course-grained HCR_EL2.TTLBOS trap reaches the handler handle_tlbi_el1(), which expects an EL1 TLBI only from vEL2. With FGUs enabled the UNDEF will be injected without needing the specific handler. [oliver: Take Wei-Lin's suggested changelog]

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Take a refcount on IRQs referenced by last_lr_irq Referencing the last iCVE-2026-98712 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Take a refcount on IRQs referenced by last_lr_irq Referencing the last interrupt inserted in an LR is rather fragile, as this interrupt can vanish if a concurrently unmapped LPI. Solve this by bumping up the refcount on the interrupt when populating last_lr_irq, and drop it at vgic_prune_ap_list() time, when LPIs are being reclaimed.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: cw1200: fix TX padding OOB read leaking heap data to device The TX path rounds the tCVE-2026-98711 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: cw1200: fix TX padding OOB read leaking heap data to device The TX path rounds the transfer size up to the bus alignment (align_size(), up to 511 bytes for SDIO, 1 byte for SPI) but sends the padded length straight from the frame buffer, which has no room reserved for the padding. cw1200_data_write() therefore reads past the end of the frame and the bus transfer carries those bytes to the device. A bogus device can collect up to 511 bytes of kernel heap data per TX frame. The RX path does not have this problem: it allocates the skb with the aligned length (alloc_len) before reading. Compute the exact padding with the bus align_size() callback, make sure queued TX frames have tailroom for it, and zero the padding bytes before the transfer so nothing past the frame is exposed. This is not expected to change driver behavior on most cases: frame contents and transfer sizes are unchanged, only the content of the padding bytes (previously undefined stale memory, now zero), which the device never reads since the WSM header carries the real frame length. The skb expansion can only fail under memory exhaustion

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: 3945: free EEPROM data on remove il3945_pci_probe() calls il_eeprom_init()CVE-2026-98710 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: 3945: free EEPROM data on remove il3945_pci_probe() calls il_eeprom_init(), which allocates memory for the EEPROM data. The probe failure paths release this allocation with il_eeprom_free(), but the remove path does not free it after a successful probe. As a result, the EEPROM data is leaked when the PCI device is removed. Free the EEPROM data in il3945_pci_remove() before releasing the mac80211 hardware structure. This issue was found by manual code inspection.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: count only matching reservations in reserved switch ieee80211_vif_use_reseCVE-2026-98709 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: count only matching reservations in reserved switch ieee80211_vif_use_reserved_switch() validates a replacement by counting assigned links on ctx->replace_ctx and treating reservations too broadly. A link can still be assigned to the old channel context while holding a reservation that belongs to a different replacement operation. That can make the current replacement appear complete too early. If another link finalizes first, the function can free the WILL_BE_REPLACED chanctx while the unmatched link and driver still use it, leading to a use-after-free in later beacon generation. Require an in-place reservation to point at the current replacement context, and require the reserved and assigned contexts to be the matching replacement pair, before counting or moving the link.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep paired old chanctx alive An in-place replacement keeps reciprocal repCVE-2026-98708 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep paired old chanctx alive An in-place replacement keeps reciprocal replace_ctx pointers between the old WILL_BE_REPLACED chanctx and the new REPLACES_OTHER chanctx. However, the early free paths only consider assigned and reserved link users when deciding whether to free the old chanctx. That lets the old chanctx be freed too early while the replacement partner still points back to it, either when the last assigned link is released or when that link successfully reassigns to another existing context. Later unreserve and switch-finalization paths can then follow a stale replace_ctx pointer. Keep a paired old chanctx alive until the replacement pair has been torn down. Apply the same check to both __ieee80211_link_release_channel() and ieee80211_link_use_reserved_reassign(). If the replacement is later abandoned, ieee80211_link_unreserve_chanctx() already tears down the pairing before freeing the old chanctx once no users remain.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: shut down RX BA session timer on teardown Tearing down an RX BA session caCVE-2026-98707 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: shut down RX BA session timer on teardown Tearing down an RX BA session can leave the session timer queued on a freed tid_rx. Later timer-wheel processing and the timer callback itself then run against freed memory. An RX BAR handler can dereference tid_rx under RCU before teardown unpublishes it and stay in its read-side critical section while teardown deletes the session timer. The stale handler can then rearm the timer after timer_delete_sync() returns and before the RCU callback frees tid_rx. Use timer_shutdown_sync() so rearm attempts become ineffective once teardown starts. Keep reorder_timer unchanged: teardown marks the session removed under reorder_lock and its release path checks that state before rearming. session_timer has no equivalent guard because ieee80211_rx_h_ctrl() rearms it before taking reorder_lock.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drain PS delivery work during station teardown Removing an AP or mesh statCVE-2026-98706 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drain PS delivery work during station teardown Removing an AP or mesh station can notify the driver and wake TXQs after the station has already been removed from the driver, and can update num_sta_ps and the power-save queues after station cleanup has purged them. sta_deliver_ps_frames() tests sta->dead only before it starts delivery. A worker that passes that test can be delayed while teardown sets sta->dead and removes the station from the driver; when it resumes it still runs the full delivery. The existing cancel_work_sync() sits near the end of __cleanup_single_sta(), after the final driver state transition and after PS accounting and queue purging, so it drains the worker only once the state it has to protect has already changed. Before commit d34ba2168a3c ("mac80211: don't delay station destruction") cleanup was deferred through the same ordered workqueue as the delivery work, which kept the two ordered. Cancel the work after setting sta->dead and before moving the driver state, and move the existing cancellation to the start of __cleanup_single_sta(). The first drain closes the driver-l

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: account proxy paths against the mesh path limit Proxy-path churn can driveCVE-2026-98705 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: account proxy paths against the mesh path limit Proxy-path churn can drive the interface path counter negative and let later mesh path additions exceed MESH_MAX_MPATHS. mesh_path_free_rcu() decrements the interface mpaths counter for entries from both the mesh and proxy path tables, but mpp_path_add() never reserves a slot in that counter. Removing or expiring a proxy path therefore returns a slot that was never charged. mesh_path_add() uses the same counter to enforce MESH_MAX_MPATHS, so once it falls below the number of installed paths the limit no longer holds. Reserve the shared quota before allocating a proxy path and release it on every unsuccessful addition. Mesh and proxy paths now share one 1024-entry budget, so mpp_path_add() can return -ENOSPC at that limit.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep fallback association elements alive Associating to a non-transmitted CVE-2026-98704 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: keep fallback association elements alive Associating to a non-transmitted MBSSID profile reads freed memory while determining the operating channel and applying HT capabilities. When an association response omits WMM, HT, or VHT information, ieee80211_assoc_config_link() parses the cached BSS IEs and copies the missing element pointers out of that fallback parse. For a non-transmitted MBSSID profile those pointers refer to merged-profile storage owned by the parse object, and the fallback block frees that object at its end. The copied pointers are used afterwards to determine the operating channel, configure bandwidth, and apply HT capabilities. Keep the fallback parse result alive until association setup finishes. [reorder variable declaration]

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: minstrel_ht: validate fixed rate index The fixed_rate_idx debugfs file is CVE-2026-98703 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: minstrel_ht: validate fixed rate index The fixed_rate_idx debugfs file is a plain u32 attribute, so any value can be written to it. minstrel_ht_update_stats() then copies the value into mi->max_tp_rate[] and mi->max_prob_rate, and minstrel_ht_set_rate() uses MI_RATE_GROUP()/MI_RATE_IDX() to index minstrel_mcs_groups[] (42 entries) and mi->groups[].rates[] (10 entries) with it. Writing e.g. 65535 selects group 4095 and rate index 15, far outside both arrays. The out-of-bounds entries are dereferenced and updated as struct minstrel_rate_stats (retry counts, etc.), so the invalid index corrupts adjacent kernel memory. With CONFIG_UBSAN_BOUNDS the access is reported as an array-index-out-of-bounds in minstrel_ht_set_rate(). Only a valid group/rate pair, or U32_MAX to disable fixed rate processing, can be used safely, so reject any other value when the debugfs file is written. The file is only reachable through a root-only debugfs mount, so this is not a privilege boundary. The out-of-bounds access is still a bug that must not be reachable through a writable debugfs attribute.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject invalid 320 MHz CSA bandwidth The HT/VHT channel definition validatCVE-2026-98702 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject invalid 320 MHz CSA bandwidth The HT/VHT channel definition validator can receive a 320 MHz bandwidth indication from a received CSA frame on a non-6 GHz link. It warns for this unsupported width but continues with an uninitialized vht_operation.chan_width, which is then read by ieee80211_chandef_vht_oper(). With panic_on_warn enabled, this lets a received frame panic the kernel. Reject the channel definition before entering the VHT operation conversion. This preserves the existing CSA fallback while avoiding both the warning and the uninitialized read.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: release mesh path quota on failed additions Repeated failed or duplicate mCVE-2026-98701 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: release mesh path quota on failed additions Repeated failed or duplicate mesh path additions can exhaust MESH_MAX_MPATHS while the path table holds fewer paths, which stops new paths to reachable destinations from being created. mesh_path_add() reserves a slot before allocating and inserting a path. If allocation fails, the function returns without releasing the slot. If the rhashtable insertion reports an error or an existing destination, the function discards its candidate but retains the reservation. No new path is installed in any of these cases. Release the reservation whenever the candidate is not installed.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: set info->band for 802.3 encap offload frames Unlike the 802.11 TX paths, CVE-2026-98700 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: set info->band for 802.3 encap offload frames Unlike the 802.11 TX paths, ieee80211_8023_xmit() does not set info->band from the channel context on non-MLD interfaces. It stays at 0, so ieee80211_get_tx_rates() uses the wrong band for these frames. Set it the same way as ieee80211_build_hdr(): drop the frame if there is no channel context, and leave the band at 0 on MLD interfaces.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix mesh fast xmit path deletion UAF mesh_fast_tx_cache() stores raw mesh_CVE-2026-98699 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix mesh fast xmit path deletion UAF mesh_fast_tx_cache() stores raw mesh_path pointers. Path deletion flushes the cache and then frees the path with kfree_rcu(), but a lookup that already holds the path can insert a new cache entry after the flush. The cache then points at freed memory. Set MESH_PATH_DELETED before flushing, and skip inserting a cache entry if the path or MPP path is already deleted. Check this under the cache walk lock so it is ordered with the flush. Use WRITE_ONCE() for the deletion flag updates because the cache check reads flags without taking state_lock.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: handle empty FILS association request payload fils_encrypt_assoc_req() accCVE-2026-98698 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: handle empty FILS association request payload fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose last element is the FILS Session element. crypt_len is then zero and aes_siv_encrypt() is called with an empty plaintext. kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the unconditional sg_init_one() puts an invalid page into the scatterlist. With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf(); without the debug check the bogus page is handed to the crypto backend. AES-SIV is defined for empty plaintext and the S2V result is then the complete output, so handle this case before the CTR step, which has nothing to encrypt.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix dynamic id driver deregistration race Only free the dynamic ids after havCVE-2026-98697 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix dynamic id driver deregistration race Only free the dynamic ids after having deregistered the driver and removed the "new_id" attribute to avoid leaking any id added by a racing write to the attribute.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix driver deregistration order USB serial driver modules register one driverCVE-2026-98696 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix driver deregistration order USB serial driver modules register one driver for the USB bus and one or more drivers for the ports on the USB serial bus. When unloading a driver module, the USB driver must be deregistered before the USB serial bus drivers so that I/O is stopped before unbinding the ports to avoid use-after-free in completion handlers accessing port data. Note that the "new_id" attributes must first be removed to prevent new ids from being added and triggering a probe of the USB driver after it has been deregistered.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix ioctl hangup race The tty ioctls can race with hangup and end up calling CVE-2026-98695 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: USB: serial: fix ioctl hangup race The tty ioctls can race with hangup and end up calling into a tty driver for a device that is already gone or powered down. Serialise the callbacks using the tty port mutex and add the missing checks to make sure the port has not been hung up before accessing port driver data or hardware. This specifically avoids dereferencing a NULL-pointer if a device is disconnected during lengthy break signalling. Note that TIOCGICOUNT and TIOCMIWAIT do not access port driver data or hardware and are therefore not affected by the race.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix KASAN reported use-after-free when request is canceled Alan reported thatCVE-2026-98694 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix KASAN reported use-after-free when request is canceled Alan reported that when doing stress testing sometimes KASAN notices use-after-free during control channel operation (stripped down keeping the relevant parts): BUG: KASAN: slab-use-after-free in tb_cfg_request_sync+0x240/0x250 [thunderbolt] Read of size 24 at addr ffff88811067f290 by task kworker/u40:2/1760 <TASK> tb_cfg_request_sync+0x240/0x250 [thunderbolt] tb_cfg_read_raw+0x367/0x510 [thunderbolt] tb_cfg_read+0xec/0x240 [thunderbolt] tb_port_get_link_generation+0x258/0x420 [thunderbolt] tb_usb3_consumed_bandwidth+0x1c1/0x2c0 [thunderbolt] tb_tunnel_consumed_bandwidth+0xfd/0x910 [thunderbolt] tb_available_bandwidth+0x5f2/0xeb0 [thunderbolt] tb_recalc_estimated_bandwidth+0x2a0/0x1bc0 [thunderbolt] tb_handle_dp_bandwidth_request+0x1897/0x5e20 [thunderbolt] process_one_work+0x675/0x1230 worker_thread+0x5e6/0xf70 kthread+0x365/0x470 ret_from_fork+0x54d/0x710 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1760: __kmalloc_cache_noprof+0x1ee/0x550 tb_cfg_read_raw+0x1d3/0x510 [thunderbolt] tb_cfg_r

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Hold a router reference for each allocated HopID tb_stop() drops the referencCVE-2026-98693 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Hold a router reference for each allocated HopID tb_stop() drops the reference to all DP tunnels but does not deactivate them, thus nothing cancels a dprx_work still in flight (which holds its own tunnel reference) and the tunnel can outlive tb_switch_remove(). The HopID releases in tb_path_free() then operate on freed IDAs and trigger warnings like ida_free called for id=8 which is not allocated. This can be triggered by unbinding the driver while a DP tunnel is still waiting for the DPRX capabilities read to finish. On the Apple NHI unplugging the cable runs into just that reliably because the read can never finish right now and because the unplug powers down the entire USB4 complex and removes the NHI device. Take a router reference whenever an input or output HopID is allocated and drop it again after the HopID is released. This keeps the ports and their HopID IDAs alive for as long as they are used. The KUnit tests allocate routers without ever registering their devices so initialize the embedded struct device there as well and drop its initial reference when the test is finished.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Make the DP tunnel activation callback mandatory tb_tunnel_alloc_dp() takes aCVE-2026-98692 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Make the DP tunnel activation callback mandatory tb_tunnel_alloc_dp() takes an optional callback which is run from dprx_work once the DPRX capabilities read has completed. Without that callback tb_dp_dprx_start() reads the capabilities synchronously and never queues the work. It however always takes a tunnel reference which is only dropped by dprx_work itself or by tb_dp_dprx_stop() when cancel_delayed_work() actually canceled that work. That reference is thus leaked for every tunnel without a callback. The only tunnels without one are those from tb_tunnel_discover_dp(), which are activated again when restoring from hibernation. Pass the callback to tb_tunnel_discover_dp() as well and drop the synchronous path such that the DPRX capabilities are always read from dprx_work. Hibernation restore then also no longer blocks for up to 12 seconds while waiting for that read to complete. Also fix up the KUnit tests.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Tear down inactive DP tunnels when the domain is stopped tb_stop() only tearsCVE-2026-98691 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Tear down inactive DP tunnels when the domain is stopped tb_stop() only tears down DMA tunnels so a DP tunnel that is still waiting for dprx_work to complete keeps that work queued while the routers are removed and the control channel is stopped. The work only stops once the DPRX timeout has passed and because it requeues itself until then the flush_workqueue() in tb_domain_remove() won't wait for its final run. The callback then runs against a domain that is already torn down. A reference to that domain is kept so the completion waiting for that domain to disappear in unbind will block until the timeout is eventually reached. Tear down DP tunnels that are not active yet as well which also cancels that work. Tunnels for displays that are already alive are untouched and keep working.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix domain reference leak when DPRX read is canceled tb_tunnel_one_dp() takesCVE-2026-98690 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix domain reference leak when DPRX read is canceled tb_tunnel_one_dp() takes a domain reference which is only dropped once tb_dp_tunnel_active() has run on the work queue. If that work is cancelled that reference is leaked. Since commit f5cc545f5969 ("thunderbolt: Wait for tb_domain_release() to complete when driver is removed") instead of just leaking memory this now also blocks in the completion wait forever when unbinding the driver. This can be triggered whenever a DP tunnel is torn down before the DPRX read has completed, e.g. by unplugging within the timeout, and then unbinding the driver. That reference only exists to keep the domain around while the DPRX work is scheduled so let the work itself own it: take it in tb_dp_dprx_start() and drop it in both places that end the work. Get/put are then paired inside the same file and it doesn't matter anymore if the callback ever runs.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Get in touch

Tell us what you're building.

A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.

01The person who'll do the work writes back
02A short call, then a written plan with the price
03Nothing starts until you say yes
04Hacked or down right now? Call, and we pick up the same day
843-331-6339

Not ready to talk yet? Run the free website check and see what Google sees.

What do you need?
Build
Grow
Protect
Urgent

No newsletter, no sales sequence. Just a reply.