Vulnerability database

25,389 results · page 109 of 508

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix slab-out-of-bounds write in wacom_wac_queue_insert wacom_wac_queue_insert(CVE-2026-64366 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix slab-out-of-bounds write in wacom_wac_queue_insert wacom_wac_queue_insert() calls kfifo_skip() in a loop when the kfifo doesn't have enough space for the incoming report. If the kfifo is empty, kfifo_skip() reads stale data left in the kmalloc'd buffer via __kfifo_peek_n() and interprets it as a record length, advancing fifo->out by that garbage value. This corrupts the internal kfifo state, causing kfifo_unused() to return a value much larger than the actual buffer size, which bypasses __kfifo_in_r()'s guard: if (len + recsize > kfifo_unused(fifo)) return 0; kfifo_copy_in() then performs an out-of-bounds memcpy, writing up to 3842 bytes past the 256-byte buffer. Add a !kfifo_is_empty() condition to the while loop so kfifo_skip() is never called on an empty fifo, and check the return value of kfifo_in() to reject reports that are too large for the fifo.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: HID: letsketch: fix UAF on inrange_timer at driver unbind letsketch_driver does not providCVE-2026-64365 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: HID: letsketch: fix UAF on inrange_timer at driver unbind letsketch_driver does not provide a .remove callback, but letsketch_probe() arms a per-device timer: timer_setup(&data->inrange_timer, letsketch_inrange_timeout, 0); The timer is re-armed from letsketch_raw_event() with a 100 ms timeout on every pen-in-range report, and its callback dereferences data->input_tablet to deliver a synthetic BTN_TOOL_PEN release. letsketch_data is allocated with devm_kzalloc(), and its input_dev fields are devm-allocated via letsketch_setup_input_tablet(). On device unbind (USB unplug or rmmod), the HID core runs its default teardown and devm cleanup frees both letsketch_data and the input devices. Because no .remove callback exists, nothing drains the timer first: if raw_event armed it within ~100 ms of the unbind, the pending timer fires on freed memory. This is a UAF read of data and of data->input_tablet, followed by input_report_key() / input_sync() into the freed input_dev. The same problem can occur on the probe error path: if hid_hw_start() enabled I/O on an always-poll-quirk device and then failed, raw_event

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix out-of-bounds bit access on mt_io_flags mt_io_flags is a single unsigCVE-2026-64364 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: fix out-of-bounds bit access on mt_io_flags mt_io_flags is a single unsigned long, but mt_process_slot(), mt_release_pending_palms() and mt_release_contacts() use it as a per-slot bitmap indexed by the slot number. That slot number is only bounded by td->maxcontacts, which is taken from the device's ContactCountMaximum feature report and can be up to 255, not by BITS_PER_LONG. As a result, a multitouch device that advertises a large contact count makes set_bit()/clear_bit() operate past the mt_io_flags word and corrupt the adjacent members of struct mt_device. The sticky-fingers release timer is the easiest way to reach this. mt_release_contacts() runs for (i = 0; i < mt->num_slots; i++) clear_bit(i, &td->mt_io_flags); with num_slots == maxcontacts. For maxcontacts around 250 the loop clears the bits that overlap td->applications.next, zeroing that list head, and the list_for_each_entry() that immediately follows then dereferences NULL. The kernel panics from timer (softirq) context. On a KASAN build this shows up as a general protection fault in mt_release_contacts() with a null-ptr-deref

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: HID: appleir: fix UAF on pending key_up_timer in remove() appleir_remove() runs hid_hw_stoCVE-2026-64363 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: HID: appleir: fix UAF on pending key_up_timer in remove() appleir_remove() runs hid_hw_stop() before timer_delete_sync(). hid_hw_stop() synchronously unregisters the HID input device via hid_disconnect() -> hidinput_disconnect() -> input_unregister_device(), which drops the last reference and frees the underlying input_dev when no userspace handle holds it open. key_up_tick() reads appleir->input_dev and calls input_report_key() / input_sync() on it. The timer is armed from appleir_raw_event() with a HZ/8 (~125 ms) timeout on every keydown and key-repeat report. If a key was pressed shortly before the device is disconnected, the timer can fire after hid_hw_stop() has freed input_dev but before the teardown drains it. A simple reorder is not sufficient. Putting the timer drain first still leaves a window where a USB URB completion (raw_event) running during hid_hw_stop() can call mod_timer() and re-arm the timer, which then fires after hidinput_disconnect() has freed input_dev. The same URB-completion window also lets raw_event() reach key_up(), key_down() and battery_flat() directly, all of which dereferenc

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: HID: lg-g15: cancel pending work on remove to fix a use-after-free lg_g15_data is allocateCVE-2026-64362 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: HID: lg-g15: cancel pending work on remove to fix a use-after-free lg_g15_data is allocated with devm and holds a work item. The report handlers schedule that work straight from device input. lg_g15_event() and lg_g15_v2_event() do it on the backlight cycle key, and lg_g510_leds_event() does it too. The worker dereferences the lg_g15_data back through container_of. The driver had no remove callback and never cancelled the work. So if a report scheduled the work and the keyboard was then unplugged, devres freed lg_g15_data while the work was still pending or running, and the worker touched freed memory. This is a use-after-free. It is reachable as a race on device unplug. Add a remove callback that cancels the work before devres frees the state. g15->work is only initialized for the models that schedule it (G15, G15 v2, G510). The G13 and Z-10 leave it zeroed, so guard the cancel on g15->work.func to avoid cancelling a work that was never set up. The g15 NULL test mirrors the one already in lg_g15_raw_event().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length check_and_correct_requCVE-2026-64361 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length check_and_correct_requested_length() compares (off + len) against node_size using u32 arithmetic. When the caller passes a large len value (e.g. from an underflowed subtraction in hfs_brec_remove()), off + len can wrap past 2^32 and produce a small result, causing the bounds check to pass when it should fail. For example, with off=14 and len=0xFFFFFFF2 (underflowed from data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6, which is less than a typical node_size of 512, so the check passes and the subsequent memmove reads ~4GB past the node buffer. Fix this by widening the addition to u64 before comparing against node_size. This prevents the u32 wrap while keeping the logic straightforward.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: zero-initialize buffer in hfs_bnode_read hfs_bnode_read() can return early wiCVE-2026-64360 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: zero-initialize buffer in hfs_bnode_read hfs_bnode_read() can return early without writing to the output buffer when is_bnode_offset_valid() fails or when check_and_correct_requested_ length() corrects the length to zero. Callers such as hfs_bnode_read_ u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the result unconditionally, leading to KMSAN uninit-value reports. Rather than initializing at each individual call site, zero the buffer at the start of hfs_bnode_read() before any validation checks. This ensures all callers in both hfs and hfsplus get a deterministic zero value regardless of which early-return path is taken.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers Syzbot reported a huCVE-2026-64359 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers Syzbot reported a hung task in nilfs_transaction_begin() where multiple tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds waiting to acquire ns_segctor_sem for read: INFO: task syz.0.17:5918 blocked for more than 143 seconds. Call Trace: schedule+0x164/0x360 rwsem_down_read_slowpath+0x6d9/0x940 down_read+0x99/0x2e0 nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221 nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921 notify_change+0xc1a/0xf40 chmod_common+0x273/0x4a0 do_fchmodat+0x12d/0x230 The writer holding ns_segctor_sem was a concurrent NILFS_IOCTL_CLEAN_SEGMENTS caller, stuck inside printk while emitting per-element warnings from nilfs_sufile_updatev(): __nilfs_msg+0x373/0x450 fs/nilfs2/super.c:78 nilfs_sufile_updatev+0x21c/0x6d0 fs/nilfs2/sufile.c:186 nilfs_sufile_freev fs/nilfs2/sufile.h:93 [inline] nilfs_free_segments fs/nilfs2/segment.c:1140 [inline] nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1261 [inline] nilfs_segctor_do_construct+0x1f55/0x76c0 nilfs_

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: cancel workqueue on release for supported platforms only Since a recent fCVE-2026-64358 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: cancel workqueue on release for supported platforms only Since a recent fix the mtk_jpeg_release function cancels any pending or running work present in the driver workqueue using cancel_work_sync function. Currently, only the multicore based variants use this workqueue and they have the jpeg_worker platform data field initialized with a workqueue callback function. For the others, this field value remain NULL by default. The cancel_work_sync function is unconditionally called in mtk_jpeg_release function, even for the variants that do not use the workqueue. This call generates a WARN_ON print in __flush_work because the workqueue callback function presence check fails in __flush_work function (used by cancel_work_sync). So, to avoid these warnings, call cancel_work_sync only if a workqueue callback is defined in platform data.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchmaps reservation limit check xfs_exchmaps_estimate_overhead() adds the bmbt aCVE-2026-64357 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchmaps reservation limit check xfs_exchmaps_estimate_overhead() adds the bmbt and rmapbt overhead to a local resblks variable, but the final UINT_MAX check still tests req->resblks. That is the reservation value from before the overhead was added. The computed value is stored back in req->resblks and later passed to xfs_trans_alloc(), whose block reservation argument is unsigned int. Check the computed reservation so the existing limit applies to the value that will be used.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: xfs: fix memory leak in xfs_dqinode_metadir_create() If xfs_metadir_create() fails in xfs_CVE-2026-64356 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: xfs: fix memory leak in xfs_dqinode_metadir_create() If xfs_metadir_create() fails in xfs_dqinode_metadir_create(), the current code returns directly, leaking the allocated update and transaction state. If the subsequent commit fails, the caller-owned inode reference is left behind. Fix this memory leak by routing the create failure path through xfs_metadir_cancel(). For both create and commit failures, finish and release any inode returned to the caller, mirroring the unwind pattern in xfs_metadir_mkdir(). The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. Runtime validation used kprobe fault injection during `mount -o uquota` on a metadir XFS image. Injecting xfs_metadir_create() reproduced the old active-update path that left mount stuck later in mount setup; after this change, the same injection reported cancel_hits=1 and irele_hit

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reject fragmented frames in devmap Devmap broadcast redirects clone the packet for alCVE-2026-64355 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Reject fragmented frames in devmap Devmap broadcast redirects clone the packet for all but the last destination. For native XDP, that clone path copies only the linear xdp_frame data, while fragmented frames keep skb_shared_info in tailroom outside the linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but without valid frag metadata, and the later free path can interpret uninitialized tail data as skb_shared_info, leading to an out-of-bounds access during frame return. Reject fragmented native XDP frames in dev_map_enqueue_clone(). Add the same restriction to the generic XDP clone path in dev_map_redirect_clone(). Generic XDP represents fragmented packets as nonlinear skbs, and rejecting them here keeps clone-based broadcast support aligned between native and generic XDP.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Validate BTF repeated field counts before expansion btf_parse_struct_metas() walks usCVE-2026-64354 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Validate BTF repeated field counts before expansion btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD, and btf_repeat_fields() expands repeatable fields from array elements into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields(). The remaining-capacity check performs the expanded field count calculation in u32. A malformed BTF can wrap that calculation, causing the check to pass even when the expanded field count exceeds the scratch array capacity. The following memcpy() can then write past the end of the array. Use checked addition and multiplication before copying repeated fields and reject impossible counts.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Keep dynamic inner array lookups nullable An ARRAY_OF_MAPS can use an array created wCVE-2026-64353 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: bpf: Keep dynamic inner array lookups nullable An ARRAY_OF_MAPS can use an array created with BPF_F_INNER_MAP as its inner map template. A concrete inner array with a different max_entries value can then replace the template. After a successful outer map lookup, the verifier represents the resulting map pointer using the inner map template. Const-key lookup nullness elision consequently uses the template max_entries even though the runtime helper uses the concrete inner map max_entries. Do not elide lookup result nullness for maps marked with BPF_F_INNER_MAP, because the template max_entries does not prove that the key is in bounds for the concrete runtime map.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Allow LPM map access from sleepable BPF programs trie_lookup_elem() annotates its rcuCVE-2026-64352 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Allow LPM map access from sleepable BPF programs trie_lookup_elem() annotates its rcu_dereference_check() walks with only rcu_read_lock_bh_held(). Because rcu_dereference_check(p, c) resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI and classic RCU readers but fails for sleepable BPF programs, which enter via __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace(). trie_update_elem() and trie_delete_elem() have the same problem in a different form: they walk the trie with plain rcu_dereference(), which asserts rcu_read_lock_held() unconditionally. Both are reachable from sleepable BPF programs via the bpf_map_update_elem / bpf_map_delete_elem helpers, and from the syscall path under classic rcu_read_lock(). In the writer paths the trie is actually protected by trie->lock (an rqspinlock taken across the walk); we never relied on the RCU read-side lock to keep nodes alive there. A sleepable LSM hook that ends up touching an LPM trie therefore triggers lockdep on debug kernels: ============================= WARNING: suspicious RCU usage 7.1.0-... Tainted: G E --

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() kalmia_rx_fixup() computes usCVE-2026-64351 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65535 read from header_start[2], then drives a memcmp() and the following skb_trim() and skb_pull() past the end of the rx buffer. The rx buffer is hard_mtu * 10, which is 14000 bytes. That is an out of bounds read. Require both the start and end framing headers to be present before subtracting them, on every loop iteration.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info() cdnsp_alloc_stream_CVE-2026-64350 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info() cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream mapping update fails, the error path frees the allocated stream rings and stream_rings array, but leaves stream_ctx_array allocated. Free the stream context array before falling through to the stream_rings cleanup path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup() The dwc3_ulpi_setCVE-2026-64349 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: fix dwc3_readl() and dwc3_writel() calls in dwc3_ulpi_setup() The dwc3_ulpi_setup() calls the register read and write calls with dwc3->regs when both these calls take the dwc3 structure directly. Chnage these two calls to fix the following sparse warning, and possibly a nasty bug in the dwc3_ulpi_setup() code: drivers/usb/dwc3/core.c:796:45: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:796:45: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:796:45: got void [noderef] __iomem *regs drivers/usb/dwc3/core.c:798:40: warning: incorrect type in argument 1 (different address spaces) drivers/usb/dwc3/core.c:798:40: expected struct dwc3 *dwc drivers/usb/dwc3/core.c:798:40: got void [noderef] __iomem *regs

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: free iso schedules on failed submit EHCI and FOTG210 isochronous submits build an ehcCVE-2026-64348 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: free iso schedules on failed submit EHCI and FOTG210 isochronous submits build an ehci_iso_sched before linking the URB to the endpoint queue, and keep the staged schedule in urb->hcpriv until iso_stream_schedule() and the link helpers consume it. If the controller is no longer accessible, or usb_hcd_link_urb_to_ep() fails, submit jumps to done_not_linked before that handoff happens and leaks the staged schedule still attached to urb->hcpriv. Free the staged schedule from done_not_linked when submit fails before the URB is linked and clear urb->hcpriv after the free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an EHCI host controller with a USB isochronous device to test with, no runtime testing was able to be performed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of cCVE-2026-64347 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head inside struct usb_composite_dev. config->descriptors[0] reads whatever sits at that offset. The memcpy copies up to w_length bytes of it into the response buffer. cdev->configs can be empty in two cases. One is a teardown race on gadget unbind with a control transfer in flight. The other is a driver that sets is_otg before it adds a config. A reproducer that holds cdev->configs empty triggers a KASAN fault in this branch. Use list_first_entry_or_null() so the existing check does its job.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: Fix use-after-free in gadget_match_driver The udc structure acts as the CVE-2026-64346 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: Fix use-after-free in gadget_match_driver The udc structure acts as the management structure for the gadget, but their lifecycles are decoupled. A race condition exists where usb_del_gadget() frees the udc memory (e.g., via mode-switch work) while gadget_match_driver() concurrently accesses the freed udc memory (e.g., via configfs), causing a Use-After-Free (UAF) that triggers a NULL pointer dereference when the freed memory is zeroed: [39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [39430.911397][ T1171] pc : __pi_strcmp+0x20/0x140 [39430.911441][ T1171] lr : gadget_match_driver+0x34/0x60 ... [39430.911890][ T1171] usb_gadget_register_driver_owner+0x50/0xf8 [39430.911910][ T1171] gadget_dev_desc_UDC_store+0xf4/0x140 [39430.931308][ T1171] configfs_write_iter+0xec/0x134 [39430.957058][ T1171] Workqueue: events_freezable __dwc3_set_mode [39430.957287][ T1171] dwc3_gadget_exit+0x34/0x8c [39430.957304][ T1171] __dwc3_set_mode+0xc0/0x664 Fix this by ensuring the udc structure remains allocated until the gadget is released. To achiev

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_printer: take kref only for successful open printer_open() returns -EBUSY wCVE-2026-64345 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_printer: take kref only for successful open printer_open() returns -EBUSY when the character device is already open, but it increments dev->kref regardless of the return value. VFS does not call ->release() for a failed open, so every rejected second open permanently leaks one reference. Move kref_get() into the successful-open branch.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: USB: idmouse: fix use-after-free on disconnect race mutex_unlock() may access the mutex stCVE-2026-64344 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: USB: idmouse: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex struCVE-2026-64343 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect Submitted write URBs are not stopped on cCVE-2026-64342 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect Submitted write URBs are not stopped on close() and therefore need to be stopped unconditionally on disconnect() to avoid use-after-free in the completion handler.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex CVE-2026-64341 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: USB: legousbtower: fix use-after-free on disconnect race mutex_unlock() may access the mutCVE-2026-64340 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: USB: legousbtower: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object after it's unlocked")

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: bound bulk IN response length to the received transfer usbio_bulk_msg() CVE-2026-64339 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: usb: misc: usbio: bound bulk IN response length to the received transfer usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len) into the caller's buffer. bpkt_len is fully controlled by the device and is only checked against ibuf_len; ibuf_len in turn is checked against usbio->txbuf_len, not against rxbuf_len: if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) || (ibuf_len > (usbio->txbuf_len - sizeof(*bpkt)))) return -EMSGSIZE; txbuf_len and rxbuf_len are taken independently from the bulk OUT and bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or malfunctioning device that advertises a large bulk OUT endpoint and a small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy() then reads up to txbuf_len - rxbuf_len bytes past the end of the rxbuf slab object. The over-read bytes are handed back to the i2c layer and on to user space through i2c-dev, disclosing a

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: USB: misc: uss720: unregister parport on probe failure uss720_probe() registers a parport CVE-2026-64338 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: USB: misc: uss720: unregister parport on probe failure uss720_probe() registers a parport before reading the 1284 register used to detect unsupported Belkin F5U002 adapters. If get_1284_register() fails, the error path drops the driver private data and the USB device reference, but leaves the parport device registered. Leaving the port registered is more than a private allocation leak: parport_register_port() has already reserved a parport number and registered the parport bus device, while pp->private_data still points at the private data that the common error path is about to release. Undo the pre-announce registration in the get_1284_register() failure branch before jumping to the common private-data cleanup path. Clear priv->pp first, matching the disconnect path and avoiding a stale pointer in the private data. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: mtu3: unmap request DMA on queue failure mtu3_gadget_queue() maps the request before CVE-2026-64337 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: usb: mtu3: unmap request DMA on queue failure mtu3_gadget_queue() maps the request before checking whether the QMU GPD ring can accept another transfer. the request is returned with -EAGAIN before it is linked on the endpoint request list if mtu3_prepare_transfer() fails. Normal completion and dequeue paths unmap requests from mtu3_req_complete(), but this error path never reaches that helper, so the DMA mapping is left active. Unmap the request before returning from the failed queue path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan_pda: fix information leak The write() callback is supposed to return CVE-2026-64336 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan_pda: fix information leak The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intended.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix broken rx after throttle If the port is closed while thrCVE-2026-64335 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix broken rx after throttle If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix hard lockup on disconnect If submitting the OOB write urCVE-2026-64334 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix hard lockup on disconnect If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix write buffer corruption The digi_write_inb_command() is CVE-2026-64333 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix write buffer corruption The digi_write_inb_command() is supposed to wait for the write urb to become available or return an error, but instead it updates the transfer buffer and tries to resubmit the urb on timeout. To make things worse, for commands like break control where no timeout is used, the driver would corrupt the urb immediately due to a broken jiffies comparison (on 32-bit machines this takes five minutes of uptime to trigger due to INITIAL_JIFFIES). Fix this by adding the missing return on timeout and waiting indefinitely when no timeout has been specified as intended. This issue was (sort of) flagged by Sashiko when reviewing an unrelated change to the driver.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: USB: ulpi: fix memory leak on registration failure The allocated device name is never freeCVE-2026-64332 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: USB: ulpi: fix memory leak on registration failure The allocated device name is never freed on early ULPI device registration failures. Fix this by initialising the device structure earlier and releasing the initial reference whenever registration fails.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: fix NULL deref in vep_dequeue() vep_alloc_request() wasn't initializing vrequCVE-2026-64331 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: fix NULL deref in vep_dequeue() vep_alloc_request() wasn't initializing vrequest->udc, so cancellations on the FunctionFS AIO path were arriving in vep_dequeue without a valid UDC reference. Since vrequest->udc is never actually properly used anywhere, we opt to remove it, and update vep_dequeue to obtain a reference to the udc with ep_to_vudc(), consistent with the other vep_ ops. AFAICT this bug has existed for ~10 years. Seems that nobody has really stressed the FunctionFS AIO path on usbip's vudc. I tested this fix in a QEMU aarch64 guest driving FunctionFS endpoints via AIO. Before the fix, running `usbip attach` from the host would cause the guest to oops with the following backtrace: Call trace: vep_dequeue+0x1c/0xe4 (P) usb_ep_dequeue+0x14/0x20 ffs_aio_cancel+0x24/0x34 __arm64_sys_io_cancel+0xb0/0x124 do_el0_svc+0x68/0x100 el0_svc+0x18/0x5c el0t_64_sync_handler+0x98/0xdc el0t_64_sync+0x154/0x158

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Validate SVID index in svdm_consume_modes() In svdm_consume_modes(), theCVE-2026-64330 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Validate SVID index in svdm_consume_modes() In svdm_consume_modes(), the SVID value is read from pmdata->svids using pmdata->svid_index as an array index without bounds validation: paltmode->svid = pmdata->svids[pmdata->svid_index]; If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data is embedded inside struct tcpm_port, indexing past svids reads into adjacent fields. In particular: - At index 16, it reads the altmodes count. - At index 18 and beyond, it reads into altmode_desc[], which contains partner-supplied SVDM Discovery Modes VDOs. By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index to 20, the partner can force paltmode->svid to be loaded with an arbitrary, partner- chosen SVID, which is then registered via typec_partner_register_altmode(). Fix this by validating that pmdata->svid_index is non-negative and strictly less than pmdata->nsvids before accessing the pmdata->svids array inside svdm_consume_modes().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove The threaded IRQ handler ccg_iCVE-2026-64329 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(), which on a connector-change event calls ucsi_connector_change() and schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees uc->ucsi (kfree) before free_irq() is called, so a handler invocation already in flight may access the freed object after ucsi_destroy(). CPU 0 (remove) | CPU 1 (threaded IRQ) ucsi_destroy(uc->ucsi) | ccg_irq_handler() kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE Move free_irq() before ucsi_destroy() in the remove path. It is kept after ucsi_unregister(): ucsi_unregister() cancels connector work whose handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(), which waits for a completion that is signalled from the IRQ handler, so the IRQ must stay active until that work has been cancelled. The probe error path already orders free_irq() before ucsi_destroy(). This bug was found by static analysis.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix DMA fence leak In ffs_dmabuf_transfer(), a ffs_dma_fence object is CVE-2026-64328 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix DMA fence leak In ffs_dmabuf_transfer(), a ffs_dma_fence object is kmalloc'd, with the underlying dma_fence later initialized by dma_fence_init(), which sets its kref counter to 1. Then, dma_resv_add_fence() gets a second reference, and a pointer to the ffs_dma_fence is passed as the usb_request's "context" field. The dma-resv mechanism will manage the second reference, but the first reference is never properly released; the ffs_dmabuf_cleanup() function decreases the reference count, but only to balance with the reference grab in ffs_dmabuf_signal_done(). The code will then slowly leak memory as more ffs_dma_fence objects are created without being ever freed. Address this issue by transferring ownership of the fence to the DMA reservation object, by calling dma_fence_put() right after dma_resv_add_fence(). The ffs_dma_fence then gets properly discarded after being signalled.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Initialize epfile->in early to fix endpoint direction checks When parsiCVE-2026-64327 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Initialize epfile->in early to fix endpoint direction checks When parsing endpoint descriptors, ffs_data_got_descs() generates the eps_addrmap which contains the endpoint direction. However, epfile->in was previously only populated in ffs_func_eps_enable() which executes upon USB host connection. As a result, early userspace ioctls like FUNCTIONFS_DMABUF_ATTACH that run before the host connects would see epfile->in as 0, leading to incorrect DMA directions. By moving the initialization to ffs_epfiles_create(), epfile->in is accurate before userspace opens the endpoint files.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: block: skip sync_blockdev() on surprise removal in bdev_mark_dead() bdev_mark_dead()'s @suCVE-2026-64326 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: block: skip sync_blockdev() on surprise removal in bdev_mark_dead() bdev_mark_dead()'s @surprise == true means the device is already gone. The filesystem callback fs_bdev_mark_dead() honours this and skips sync_filesystem(), but the bare block device path (no ->mark_dead op) lost its !surprise guard when the holder ->mark_dead callback was wired up (see Fixes), and now calls sync_blockdev() unconditionally, which can hang forever waiting on writeback that can no longer complete. syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path: nvme_mark_namespaces_dead() -> blk_mark_disk_dead() -> bdev_mark_dead(bdev, true) -> sync_blockdev() blocks in folio_wait_writeback(), wedging the reset worker and every task waiting on it. Skip the sync on surprise removal, matching fs_bdev_mark_dead(); invalidate_bdev() still runs. Orderly removal (surprise == false) is unchanged. Found by FuzzNvme(Syzkaller with FEMU fuzzing framework).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921/mt7925: fix NULL dereference in CSA beacon This patch is based on a BUGCVE-2026-64325 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921/mt7925: fix NULL dereference in CSA beacon This patch is based on a BUG as reported by Bongani Hlope at https://lore.kernel.org/all/20260502125824.425d7159@bongani-mini.home.org.za/ When a channel-switch announcement (CSA) beacon is received, cfg80211 queues a wiphy work item that eventually calls mt7921_channel_switch_rx_beacon(). If the station disconnects (or the channel context is otherwise torn down) between the time the work is queued and the time it runs, the driver's dev->new_ctx pointer can already have been cleared to NULL. mt7921_channel_switch_rx_beacon() then dereferences new_ctx unconditionally, triggering a NULL pointer dereference at address 0x0: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:mt7921_channel_switch_rx_beacon+0x1f/0x100 [mt7921_common] The same missing guard exists in mt7925_channel_switch_rx_beacon(), which shares the same code pattern introduced by the same commit. Add an early-return NULL check for dev->new_ctx in both mt7921_channel_switch_rx_beacon() and mt7925_channel_switch_rx_beacon(). When new_ctx is NULL there is no pen

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: udf: validate free block extents against the partition length udf_free_blocks() checks theCVE-2026-64324 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: udf: validate free block extents against the partition length udf_free_blocks() checks the logical block number and count against the partition length, but drops the extent offset from that final bound. A crafted extent can pass the guard while logicalBlockNum + offset + count points past the partition, which later indexes past the space bitmap array. A single ftruncate(2) on a file backed by such an extent reliably panics the kernel. This is a local availability issue. On desktop systems where UDisks/polkit allows the active user to mount removable UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply the crafted filesystem and trigger the panic by truncating a writable file on it. Systems that require root or CAP_SYS_ADMIN to mount the image have a higher prerequisite. No confidentiality or integrity impact is claimed: the reproduced primitive is an out-of-bounds read of a bitmap pointer slot followed by a kernel panic. Use the already computed logicalBlockNum + offset + count value for the partition length check. Also make load_block_bitmap() reject an out-of-range block group before i

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: udf: validate VAT header length against the VAT inode size udf_load_vat() takes the virtuaCVE-2026-64323 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: udf: validate VAT header length against the VAT inode size udf_load_vat() takes the virtual partition's start offset straight from the on-disk VAT 2.0 header without checking it against the VAT inode size: map->s_type_specific.s_virtual.s_start_offset = le16_to_cpu(vat20->lengthHeader); map->s_type_specific.s_virtual.s_num_entries = (sbi->s_vat_inode->i_size - map->s_type_specific.s_virtual.s_start_offset) >> 2; lengthHeader is a fully attacker-controlled 16-bit value. If it exceeds the VAT inode size, the s_num_entries subtraction underflows to a huge count, which defeats the "block > s_num_entries" bound in udf_get_pblock_virt15(); and on the ICB-inline path that function reads ((__le32 *)(iinfo->i_data + s_start_offset))[block] so a large s_start_offset indexes past the inode's in-ICB data. Mounting a crafted UDF image with a virtual (VAT) partition then triggers an out-of-bounds read. Reject a VAT whose header length does not leave room for at least one entry within the VAT inode.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: udf: validate sparing table length as an entry count, not a byte count udf_load_sparable_mCVE-2026-64322 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: udf: validate sparing table length as an entry count, not a byte count udf_load_sparable_map() accepts a sparing table when sizeof(*st) + le16_to_cpu(st->reallocationTableLen) > sb->s_blocksize is false, i.e. it treats reallocationTableLen as a number of BYTES that must fit in the block. But the table is walked as an array of 8-byte sparingEntry elements: for (i = 0; i < le16_to_cpu(st->reallocationTableLen); i++) { struct sparingEntry *entry = &st->mapEntry[i]; ... entry->origLocation ... } in udf_get_pblock_spar15() and udf_relocate_blocks(). A reallocationTableLen of N therefore passes the check whenever sizeof(*st) + N <= blocksize, yet the consumers index sizeof(*st) + N * sizeof(struct sparingEntry) bytes -- up to ~8x the block. On a crafted UDF image this is an out-of-bounds read in udf_get_pblock_spar15(); udf_relocate_blocks() additionally feeds the same length to udf_update_tag(), whose crc_itu_t() reads far past the block, and its memmove() through st->mapEntry[] is an out-of-bounds write. Validate reallocationTableLen as the entry count it is, with struct_size().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: nvme: target: rdma: fix ndev refcount leak on queue connect nvmet_rdma_queue_connect() calCVE-2026-64321 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: nvme: target: rdma: fix ndev refcount leak on queue connect nvmet_rdma_queue_connect() calls nvmet_rdma_find_get_device() which acquires a reference on the returned ndev via kref_get(). On the path where the host queue backlog is exceeded and the function returns NVME_SC_CONNECT_CTRL_BUSY, reference of ndev is not released, leaking the kref. Fix this by adding a goto to the existing put_device label before the early return.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet: fix pre-auth out-of-bounds heap read in Discovery Get Log Page nvmet_execute_disc_gCVE-2026-64320 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: nvmet: fix pre-auth out-of-bounds heap read in Discovery Get Log Page nvmet_execute_disc_get_log_page() validates only the dword alignment of the host-supplied Log Page Offset (lpo). The 64-bit offset is then added to a small kzalloc'd buffer that holds the discovery log page and the result is passed straight to nvmet_copy_to_sgl(), which memcpy()s data_len bytes out to the host with no source-side bound check: u64 offset = nvmet_get_log_page_offset(req->cmd); /* 64-bit host */ size_t data_len = nvmet_get_log_page_len(req->cmd); /* 32-bit host */ ... if (offset & 0x3) { ... } /* only check */ ... alloc_len = sizeof(*hdr) + entry_size * discovery_log_entries(req); buffer = kzalloc(alloc_len, GFP_KERNEL); ... status = nvmet_copy_to_sgl(req, 0, buffer + offset, data_len); The Discovery controller is unauthenticated -- nvmet_host_allowed() returns true unconditionally for the discovery subsystem -- so the call is reachable pre-authentication by any TCP/RDMA/FC peer that can reach the nvmet target. With a discovery log page of ~1 KiB, an a

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: validate reply message payload bounds against transfer length nvmet_auth_replyCVE-2026-64319 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: validate reply message payload bounds against transfer length nvmet_auth_reply() accesses the variable-length rval[] array using attacker-controlled hl (hash length) and dhvlen (DH value length) fields without verifying they fit within the allocated buffer of tl bytes. A malicious NVMe-oF initiator can craft a DHCHAP_REPLY message with a small transfer length but large hl/dhvlen values, causing out-of-bounds heap reads when the target processes the DH public key (rval + 2*hl) or performs the host response memcmp. With DH authentication configured, the OOB pointer is passed directly to sg_init_one() and read by crypto_kpp_compute_shared_secret(), reaching up to 526 bytes past the buffer. This is exploitable pre-authentication. Add bounds validation ensuring sizeof(*data) + 2*hl + dhvlen <= tl before any access to the variable-length fields. Discovered by Atuin - Automated Vulnerability Discovery Engine.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physicCVE-2026-64318 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: partitions: aix: bound the pp_count scan to the ppe array aix_partition() reads the physical volume descriptor into a fixed-size struct pvd and then scans its physical-partition-extent array: int numpps = be16_to_cpu(pvd->pp_count); ... for (i = 0; i < numpps; i += 1) { struct ppe *p = pvd->ppe + i; ... lp_ix = be16_to_cpu(p->lp_ix); pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the on-disk pp_count. pp_count is an unvalidated __be16 read straight from the descriptor, so a crafted AIX image with pp_count larger than 1016 drives the loop to read pvd->ppe[i] past the end of the allocation (up to 65535 entries, ~2 MB out of bounds). The partition scan runs without mounting anything, when a block device with a crafted AIX/IBM partition table appears (an attacker-supplied image attached with losetup -P, or a device auto-scanned by udev), via msdos_partition() -> aix_partition(). Clamp the scan to the number of entries the ppe[] array can hold.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Jul 25, 2026In the Linux kernel, the following vulnerability has been resolved: isofs: bound Rock Ridge symlink components to the SL record get_symlink_chunk() and the SLCVE-2026-64317 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: isofs: bound Rock Ridge symlink components to the SL record get_symlink_chunk() and the SL handling in parse_rock_ridge_inode_internal() walk the variable-length components of a Rock Ridge "SL" (symbolic link) record. Each component is a two-byte header (flags, len) followed by len bytes of text, so it occupies slp->len + 2 bytes. Both loops read slp->len and advance to the next component, and get_symlink_chunk() additionally does memcpy(rpnt, slp->text, slp->len), but neither checks that the component lies within the SL record before dereferencing it. A crafted SL record whose component declares a len that runs past the record (rr->len) therefore triggers an out-of-bounds read of up to 255 bytes. When the record sits at the tail of its backing buffer - for example a small kmalloc()ed continuation block reached through a CE record - the read crosses the allocation; get_symlink_chunk() then copies the out-of-bounds bytes into the symlink body returned to user space by readlink(), disclosing adjacent kernel memory. ISO 9660 images are routinely mounted from untrusted removable media - desktop environments auto

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.