Critical security advisoryCriticalFlagged by our vulnerability database: A flaw in WordPress’s own updater is being exploited. Sites need 7.1.4. See if your site is affectedFlagged by our vulnerability database: WordPress updater flaw is being exploited. DetailsExploited: WordPress 7.1.4. Check your site
HuttenlocherTechnologies
Updated 6 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,782exploited flaws on CISA’s list
34added in the last 30 days
410new WordPress flaws this week
400,821entries in the database

400,821 results · page 1025 of 8017

  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: avoid rereading IB param length Reuse the parameter length returned by vcCVE-2026-68107 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: avoid rereading IB param length Reuse the parameter length returned by vcn_v4_0_enc_find_ib_param() instead of rereading it from the IB. This avoids a potential TOCTOU issue if the IB contents change between reads. (cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a)

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix division by zero with invalid uvd dimensions When width or height is less CVE-2026-68106 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix division by zero with invalid uvd dimensions When width or height is less than 16, width_in_mb or height_in_mb becomes 0, leading to fs_in_mb being 0. This causes a division by zero when calculating num_dpb_buffer in H264 and H264 Perf decode paths. Add validation to reject frames with width < 16 or height < 16 before performing any calculations that depend on these values. V2: Format change - move up all vaiable definitions. V3: Use warn_once to avoid spam. (cherry picked from commit 3e41d26c70b0a459d041cc19482a226c4b7423cb)

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix kernel panic during driver load failure Avoid kernel panic if MES init faiCVE-2026-68105 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix kernel panic during driver load failure Avoid kernel panic if MES init fails during driver load. The KIQ ring is falsely marked as ready as ASICs that use MES, KIQ is owned by MES. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu] Call Trace: gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu] amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu] amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu] amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu] amdgpu_gart_unbind+0x72/0x90 [amdgpu] amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu] amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu] amdttm_tt_unpopulate+0x29/0x70 [amdttm] ttm_bo_put+0x1eb/0x360 [amdttm] amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu] amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu] amdgpu_irq_fini_hw+0x58/0x80 [amdgpu] amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu] amdgpu_driver_load_kms+0x60/0xa0 [amdgpu] amdgpu_pci_probe+0x28e/0x6d0 [amdgpu] pci_device_probe+0x19f/0x220 really_probe+0x1ed/0x340 driver_probe_device+0x1e/0x80 __driver_attach+0xd3/0x1a0 bus_for_each_dev+0x68/0xa0

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: invoke pm_genpd_remove() before freeing genpd Call pm_genpd_remove() to unregiCVE-2026-68104 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: invoke pm_genpd_remove() before freeing genpd Call pm_genpd_remove() to unregister from global list prior to releasing acp_genpd memory, and clear the pointer after free. (cherry picked from commit cd8650d7a91ee8b768e202354672553faa5cc1f2)

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject mapping a reserved doorbell to a new queue When creating an user-queue,CVE-2026-68103 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject mapping a reserved doorbell to a new queue When creating an user-queue, the user space provides a doorbell BO handle and an offset within the bo to obtain a doorbell. However current implementation using xa_store_irq() to store a doorbell, which allows a later queue created with the same BO and offset parameters to overwrite an existing queue and doorbell mapping. This can cause problems like misrouting fence IRQ processing to a wrong queue, and mislead the cleanup process of one queue erasing the mapping of another queue. This commit fixes this issue by replacing xa_store_irq with xa_insert_irq, which rejects mapping a reserved doorbell to a newly created queue (cherry picked from commit 6244eae22966350db52faf9c1369d3b2ffc5de4e)

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix aperture mapping leak amdgpu_pci_remove() calls drm_dev_unplug() before inCVE-2026-68102 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix aperture mapping leak amdgpu_pci_remove() calls drm_dev_unplug() before invoking the driver fini routines. This causes drm_dev_enter() in amdgpu_ttm_fini() to always return false, so iounmap(aper_base_kaddr) never runs on normal driver unload, leaving an orphaned entry in the x86 PAT interval tree. On connected_to_cpu hardware, the aperture is mapped write-back (WB) via ioremap_cache(). On reload, IP discovery calls memremap(..., MEMREMAP_WC) over the same range. The WC vs WB conflict causes: ioremap error for 0x..., requested 0x1, got 0x0 amdgpu: discovery failed: -2 Fix by switching to devres-managed mappings so cleanup is guaranteed regardless of drm_dev_enter() state: - connected_to_cpu path: devm_memremap(MEMREMAP_WB). For IORESOURCE_SYSTEM_RAM ranges this takes the try_ram_remap() shortcut, returning __va(offset) from the existing kernel direct map. No new ioremap VA or PAT entry is created, so there is nothing to orphan. - dGPU path: devm_ioremap_wc() registers iounmap() as a devres action, guaranteeing cleanup at device_del() time. Also remove iounmap(aper_base_kaddr) fro

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl set_ntacl_dacl() copies eacCVE-2026-68100 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl set_ntacl_dacl() copies each ACE from the attacker-controlled stored security descriptor verbatim into the response DACL without checking sid.num_subauth. The ACE bytes (including an unchecked num_subauth) originate from an authenticated SMB2_SET_INFO(SecInfo=DACL) that is stored raw via ksmbd_vfs_set_sd_xattr(); parse_dacl() rejects a bad ACE with `break` rather than an error, so parse_sec_desc() still returns success and the malformed SD reaches the xattr intact. On a subsequent SMB2_QUERY_INFO(SecInfo=DACL) for an inode carrying a POSIX access ACL, build_sec_desc() -> set_ntacl_dacl() -> set_posix_acl_entries_dacl() walks the copied ACEs and reads ntace->sid.sub_auth[ntace->sid.num_subauth - 1] with num_subauth taken straight from the stored SD. Since sub_auth[] is fixed at SID_MAX_SUB_AUTHORITIES (15), a crafted num_subauth (e.g. 255) drives an out-of-bounds heap read of ~1 KB with an offset fully controlled by an authenticated client. The sibling functions already gate this field: parse_dacl() -- num_subauth == 0 || > SID_MAX_SUB_AUT

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL check_add_overflowCVE-2026-68099 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL check_add_overflow() unconditionally writes the truncated sum into *d even on overflow, per its contract in include/linux/overflow.h. The four check_add_overflow() guards in set_posix_acl_entries_dacl() and set_ntacl_dacl() break out of the ACE-building loops on overflow, but the truncated *size is then consumed downstream at the end of set_ntacl_dacl(): pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size); This produces an on-wire NT ACL whose pndacl->size under-reports the bytes actually written by the preceding fill_ace_for_sid()/memcpy() calls, yielding a malformed ACL that can trigger out-of-bounds reads when re-parsed by clients or ksmbd itself. Restore *size to its pre-addition value on each overflow branch (via `*size -= ace_sz` / `size -= nt_ace_size`) so that after the break, *size once again holds the cumulative size of the successfully-written ACEs. The committed ACL is then truncated-but-self-consistent rather than malformed. The ksmbd DACL builders are the only check_add_overflow() sites found where an overflow p

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound DACL dedup walk to copied ACEs set_ntacl_dacl() can stop copying ACEs before CVE-2026-68098 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound DACL dedup walk to copied ACEs set_ntacl_dacl() can stop copying ACEs before consuming the full input DACL when size accounting overflows. When that happens, num_aces reflects only the ACEs that were actually copied into the output DACL, but set_posix_acl_entries_dacl() still receives nt_num_aces and uses it to walk the existing ACE array during dedup. That makes the dedup walk scan past the copied ACE array and inspect buffer tail that does not contain valid ACEs. Split the two meanings currently carried by the NT ACE count. Pass the number of copied NT ACEs to bound the dedup walk, and preserve the original "input DACL had NT ACEs" state separately for the Everyone/default ACL fallback. This keeps the dedup walk aligned with the ACEs that are actually present in the rebuilt DACL.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate ACE size against SID sub-authorities set_ntacl_dacl() validates sid.num_suCVE-2026-68097 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate ACE size against SID sub-authorities set_ntacl_dacl() validates sid.num_subauth before copying an ACE, but does not verify that the declared ACE size contains all sub-authorities described by that field. An undersized ACE can therefore be copied and later make the POSIX ACL deduplication walk inspect data beyond the copied ACE boundary. The existing initial bound check is also too small. It only ensures that the ACE size field is accessible before set_ntacl_dacl() reads sid.num_subauth farther into the input buffer. Require enough input for the fixed SID header before accessing num_subauth, reject ACEs smaller than that header, and skip ACEs whose declared size cannot contain the complete SID. This makes the validation consistent with the other ACE walk paths.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: audit: fix recursive locking deadlock in audit_dupe_exe() A deadlock occurs in the audit sCVE-2026-68096 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

    In the Linux kernel, the following vulnerability has been resolved: audit: fix recursive locking deadlock in audit_dupe_exe() A deadlock occurs in the audit subsystem when duplicating executable-related rules. When a file is moved (e.g., via do_renameat2()), the VFS layer locks the parent directory (I_MUTEX_PARENT), which synchronously triggers an fsnotify_move event. If an existing executable audit rule matches the file being moved, the audit subsystem catches this event and calls audit_dupe_exe() to duplicate the watch and update the rule. Then, audit_alloc_mark() would call kern_path_parent() to resolve the path, leading to a blind attempt to acquire the exact same I_MUTEX_PARENT lock already held by the task, resulting in the following recursive locking deadlock: ============================================ WARNING: possible recursive locking detected 6.12.0-55.27.1.el10_0.x86_64+debug #1 Not tainted -------------------------------------------- mv/5099 is trying to acquire lock: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3}, at: __kern_path_locked+0x10a/0x2f0 but task is already holding lock: ffff888132846b58 (&inode->i_sb->s_type->i_mutex

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix race between registration and connection abortion This fixes this race: - CVE-2026-68095 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: fuse-uring: fix race between registration and connection abortion This fixes this race: - thread a: io_uring_enter -> register sqe -> fuse_uring_create_ring_ent -> allocate ent but doesn't grab queue_ref yet - thread b: fuse_conn_destroy() -> fuse_chan_abort() -> fuse_uring_abort() is a no-op due to queue ref being 0 - thread a: grabs the queue_ref, queue_ref is now 1, rest of fuse_uring_do_register() logic executes - thread b: fuse_chan_abort() returns, fuse_chan_wait_aborted() now runs and calls "wait_event(ring->stop_waitq, atomic_read(&ring->queue_refs) == 0);" The abort/unmount thread will hang indefinitely in unkillable state as nothing will decrement queue_refs or wake stop_waitq, and the ring, queue, and ent are leaked. Fix this by checking fch->connected under fch->lock after the created ent has grabbed a ref count on the queue. This ensures that in the scenario above, it is guaranteed that we either release the queue ref and wake up stop_waitq (in case fuse_chan_wait_aborted() is already waiting) in fuse_uring_do_register() when we detect !fch->connected, or if the connection is aborted aft

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: sched_ext: Preserve rq tracking across local DSQ dispatch dispatch_to_local_dsq() can run CVE-2026-68094 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: sched_ext: Preserve rq tracking across local DSQ dispatch dispatch_to_local_dsq() can run from scx_bpf_dsq_move_to_local() while ops.dispatch() has recorded the current rq. Moving a task to a local DSQ may switch to the source or destination rq before synchronously invoking ops.dequeue() through the following path: SCX_CALL_OP(dispatch, rq) ops.dispatch() scx_bpf_dsq_move_to_local() scx_flush_dispatch_buf() finish_dispatch() dispatch_to_local_dsq() scx_dispatch_enqueue() local_dsq_post_enq() call_task_dequeue() SCX_CALL_OP_TASK(dequeue, locked_rq, ...) The nested callback saves the recorded rq and restores it on return. If the rq tracking does not follow the lock switch, update_locked_rq() can trigger the following lockdep assertion while restoring an rq which is no longer held: WARNING: kernel/sched/sched.h:1641 at call_task_dequeue+0x160/0x170 Call Trace: scx_dispatch_enqueue+0x2b0/0x460 dispatch_to_local_dsq+0x138/0x230 scx_flush_dispatch_buf+0x1af/0x220 scx_bpf_dsq_move_to_local

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug If a vCCVE-2026-68093 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Bump asid_generation on CPU online to avoid ASID collision after hotplug If a vCPU stays scheduled out (or blocked) while the last pCPU it ran on goes through a hotplug cycle (online->offline->online), and the vCPU then resumes execution on the same pCPU, then it is possible for it to run with an ASID that has now been assigned to a different vCPU, resulting in stale TLB translations being used. svm_enable_virtualization_cpu() resets asid_generation to 1 and sets next_asid to max_asid + 1 on every CPU online event, including hotplug cycles. Because next_asid starts beyond the pool boundary, the first call to new_asid() after an online event always wraps the pool, incrementing asid_generation to 2 and assigning ASIDs starting from min_asid. Consider two vCPUs from different VMs, vCPU-A pinned to CPU-X holding asid_generation=2 and ASID=N from before the hotplug event: 1. CPU-X goes offline and back online: asid_generation resets to 1, next_asid = max_asid + 1. 2. One or more vCPUs migrate to CPU-X and call new_asid(), wrapping the pool and consuming ASIDs starting from min_asid. Event

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026Missing Authorization in the permission management component in Roskus Prospero Flow CRM before 5.2.1 allows any authenticated user to grant any role, includingCVE-2026-59233 · Other software · Roskus · reported by 4daa8cea-433a-44bd-9456-53b127fc289aHigh 8.7

    Missing Authorization in the permission management component in Roskus Prospero Flow CRM before 5.2.1 allows any authenticated user to grant any role, including their own, the complete set of application permissions via a crafted POST request to the permission save endpoint, which performs no authorization check before synchronizing the submitted permissions to the specified role.

    Product
    Prospero Flow CRM
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A flaw was found in GIMP's PSD file format plugin.CVE-2026-59090 · Other software · Red Hat · reported by Red HatHigh 8.4

    A flaw was found in GIMP's PSD file format plugin. This vulnerability, an unsigned integer underflow in the `block_rem` variable, occurs when a user opens a specially crafted `.psd` image file. The underflow leads to parser confusion, enabling an attacker to inject arbitrary data as layer resource blocks. This can ultimately result in arbitrary code execution, allowing the attacker to run malicious code on the victim's system.

    Product
    Red Hat Enterprise Linux 9
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A flaw was found in StackRox/RHACS Central's Auth Machine-to-Machine (M2M) token exchange.CVE-2026-19278 · Other software · Red Hat · reported by Red HatMedium 6.8

    A flaw was found in StackRox/RHACS Central's Auth Machine-to-Machine (M2M) token exchange. When an administrator configures M2M role mappings, the system uses unanchored regular expressions for matching claim values. This allows an attacker with a valid OpenID Connect (OIDC) token, whose claim value is a superstring of a configured pattern, to gain unauthorized access to roles they were not intended to receive. This can lead to privilege escalation within the system.

    Product
    Red Hat Advanced Cluster Security 4
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026entr is vulnerable to Heap-based buffer overflow in run_utility() function.CVE-2026-18370 · Other software · eradman · reported by cvd@cert.plMedium 4.8

    entr is vulnerable to Heap-based buffer overflow in run_utility() function. The function allocates a fixed-size heap buffer using malloc(ARG_MAX) and copies command-line arguments into it. It advances the destination pointer based on the return value of strlcpy(), which returns the total length of the source string rather than the number of bytes written. When the buffer is exactly filled, the remaining size underflows as an unsigned size_t, causing subsequent copies to write out of bounds. This can be triggered by supplying command-line arguments whose combined length fills the buffer, or via the /_ substitution feature which expands a short token into a longer pathname at runtime. The local attacker can cause memory corruption, process abort, and denial of service.  This issue was fixed in commit 2467fe0

    Product
    entr
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026Improper neutralization of special elements used in an OS command ('OS command injection') vulnerability in Zyxel Networks WAH7601 allows OS Command Injection.CVE-2026-13206 · Network & remote access · Zyxel Networks · reported by iletisim@usom.gov.trCritical 9.8

    Improper neutralization of special elements used in an OS command ('OS command injection') vulnerability in Zyxel Networks WAH7601 allows OS Command Injection. This issue affects WAH7601: through 20072026.

    Product
    WAH7601
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026Insufficiently Protected Credentials vulnerability in Zyxel Networks WAH7601 allows Retrieve Embedded Sensitive Data.CVE-2026-12984 · Network & remote access · Zyxel Networks · reported by iletisim@usom.gov.trHigh 8.2

    Insufficiently Protected Credentials vulnerability in Zyxel Networks WAH7601 allows Retrieve Embedded Sensitive Data. This issue affects WAH7601: through 20072026.

    Product
    WAH7601
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: time/jiffies: Register jiffies clocksource before usage Teddy reported that a XEN HVM has CVE-2026-68092 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: time/jiffies: Register jiffies clocksource before usage Teddy reported that a XEN HVM has a long boot delay, which was bisected to the recent enhancements to the negative motion detection. It turned out that the jiffies clocksource is used in early boot before it is registered, which leaves the max_delta_raw field at zero. That causes the read out to be clamped to the max delta of 0, which means time is not making progress. Cure it by ensuring that it is initialized before its first usage in timekeeping_init().

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: HID: wacom: stop hardware after post-start probe failures wacom_parse_and_register() startCVE-2026-68091 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: HID: wacom: stop hardware after post-start probe failures wacom_parse_and_register() starts HID hardware before registering inputs and initializing pad LEDs/remotes. Those later steps can fail, but their error paths currently release Wacom resources without stopping the HID hardware. Route post-hid_hw_start() failures through hid_hw_stop() before releasing driver resources. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: debugobjects: Plug race against a concurrent OOM disable syzbot reported a puzzling splat:CVE-2026-68090 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: debugobjects: Plug race against a concurrent OOM disable syzbot reported a puzzling splat: WARNING: kernel/time/hrtimer.c:443 at stub_timer+0xa/0x20 stub_timer() is installed as timer callback function in hrtimer_fixup_assert_init(), which is invoked when debug_object_assert_init() can't find a shadow object. In that case debug objects emits a warning about it before invoking the fixup. Though the provided console log lacks this warning and instead has the following a few seconds before the splat: ODEBUG: Out of memory. ODEBUG disabled So the object was looked up in debug_object_assert_init() and the lookup failed due a concurrent out of memory situation which disabled debug objects and freed the shadow objects: debug_object_assert_init() if (!debug_objects_enabled) return; obj = alloc(); if (!obj) { // Out of memory debug_objects_enabled = false; free_objects(); obj = lookup_or_alloc(); // The lookup failed beca

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: iio: core: fix uninitialized data in debugfs If *ppos is non-zero then simple_write_to_bufCVE-2026-68089 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: iio: core: fix uninitialized data in debugfs If *ppos is non-zero then simple_write_to_buffer() will not initialize the start of buf[]. Non zero values for *ppos aren't going to work anyway. Test for them at the start of the function and return -EINVAL.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: function: rndis: add length check to response query Add variable representatiCVE-2026-68088 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: usb: gadget: function: rndis: add length check to response query Add variable representations for BufLength and BufOffset in rndis_query_response(), and perform a length check on them. This is identical to how rndis_set_response() handles these parameters.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush() wacom_wac_queue_flush() is called viCVE-2026-68087 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: HID: wacom: use GFP_ATOMIC in wacom_wac_queue_flush() wacom_wac_queue_flush() is called via the .raw_event callback (wacom_raw_event → wacom_wac_pen_serial_enforce → wacom_wac_queue_flush). For USB HID devices, this callback is invoked from hid_irq_in(), which is a URB completion handler running in atomic context. Using GFP_KERNEL in this path can sleep, leading to a "scheduling while atomic" bug. Use GFP_ATOMIC instead. The existing code already handles allocation failure by skipping the fifo entry and continuing.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: write all dirty file folios when collapsing [There is no upstream commit, aCVE-2026-68086 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: write all dirty file folios when collapsing [There is no upstream commit, as this code was removed by upstream commit 044925f9b565 ("mm: fs: remove filemap_nr_thps*() functions and their users")] As-is, khugepaged and writable-file opening exclude each other. A file cannot be open writeable and have THPs (because the filesystem is not aware of them). khugepaged will never collapse file pages for files that are opened writeable. On an open(O_RDWR/O_WRONLY), the page cache for that particular file is dropped. This is fine because nothing could've been dirtied. However, there is an edge-case: collapse_file() might not be able to coexist with concurrent writers, but it can coexist with dirty folios (from previous writers). Therefore, the following can happen: open(file, O_RDWR) write(file) close(file) madvise(file_mapping, MADV_COLLAPSE, some non-dirty range) open(file, O_RDWR) nr_thps > 0 truncate_inode_pages() /* THPs are cleared out, but so are the dirty folios */ When this edge-case happens, there is data loss, as the dirty folios are fully discarded. Fix it by fully writing back the p

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled HCI_UART_SENDING bCVE-2026-68085 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled HCI_UART_SENDING bit in tx_state means write_work is pending and blocks queueing it again. Currently this bit is not cleared when canceling the work in hci_uart_close(), which blocks future writes when device is reopened later if write_work was pending. Fix by clearing HCI_UART_SENDING when canceling the work. Also make clearing of tx_skb safe by using disable_work_sync + enable_work instead of just cancel_work_sync. hci_uart_flush() purges the proto tx queue so we can cancel the pending write_work there, instead of doing it just in hci_uart_close(). Re-enable and possibly requeue the work after queue flush.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: fix location monitor leak in tsi148 bridge tsi148_probe() allocates a lCVE-2026-68084 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: fix location monitor leak in tsi148 bridge tsi148_probe() allocates a location monitor resource and links it into tsi148_bridge->lm_resources. The probe error path frees this list, but tsi148_remove() only frees the dma, slave and master resource lists, so the location monitor resource is leaked on device unbind or module unload. Free the lm_resources list in tsi148_remove() as well, before tsi148_bridge is freed.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix path resolution in ksmbd_vfs_kern_path_create The SMB2 open lookup is rooted atCVE-2026-68083 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix path resolution in ksmbd_vfs_kern_path_create The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an absolute path with convert_to_unix_name() and resolves it from AT_FDCWD via start_creating_path(), so a ".." component is walked from the real filesystem root and escapes the export. An authenticated client races a missing path component so the rooted open lookup returns -ENOENT (taking the create branch) while the same component is present (a directory) when the create walk runs; the create then resolves ".." out of the share. Root the create walk at the share like the lookup and rename paths already are: resolve the parent with vfs_path_parent_lookup(..., LOOKUP_BENEATH, &share_conf->vfs_path) and create the final component with start_creating_noperm(). convert_to_unix_name() then has no callers and is removed.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026URL Redirection to Untrusted Site ('Open Redirect') vulnerability in phoenixframework phoenix_live_view allows an attacker to send a victim's browser to an origCVE-2026-64941 · Other software · phoenixframework · reported by 6b3ad84c-e1a6-4bf7-a703-f496b71e49dbLow 2.1

    URL Redirection to Untrusted Site ('Open Redirect') vulnerability in phoenixframework phoenix_live_view allows an attacker to send a victim's browser to an origin of the attacker's choosing via a :to value containing ASCII tab, LF or CR. redirect/2 validates :to through the private validate_local_url!/2 in lib/phoenix_live_view.ex, which is intended to guarantee the target is a path within the application. It rejects a leading // and any backslash, but not ASCII tab, LF or CR. Browsers strip those three characters before parsing a URL, so a value such as /<TAB>/example.com passes validation as a path and is then resolved as the scheme-relative URL //example.com. The live navigation functions share the guard but are not affected, because the client expands their target against the current origin. push_patch/2 is also affected before 0.7.0, which is when that expansion was added. This issue affects phoenix_live_view: from 0.5.0 before 1.0.19, from 1.1.0-rc.0 before 1.1.33, and from 1.2.0-rc.0 before 1.2.9.

    Product
    phoenix_live_view
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A flaw was found in GIMP.CVE-2026-59088 · Other software · Red Hat · reported by Red HatMedium 5.5

    A flaw was found in GIMP. A signed integer overflow vulnerability exists in the `file-fli` plugin when processing FLI image files. This occurs due to an incorrect calculation during memory allocation for image buffers, where the multiplication of image width and height can exceed the maximum integer value. A remote attacker could exploit this by tricking a user into opening a specially crafted FLI file, leading to the application crashing and resulting in a denial of service.

    Product
    Red Hat Enterprise Linux 6
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A stored cross-site scripting (XSS) vulnerability in lobehub/lobe-chat through v2.2.13 allows a low-privileged authenticated user to inject arbitrary JavaScriptCVE-2026-72594 · Other software · lobehub · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cHigh 7.6

    A stored cross-site scripting (XSS) vulnerability in lobehub/lobe-chat through v2.2.13 allows a low-privileged authenticated user to inject arbitrary JavaScript into the application by uploading a crafted SVG file as a user avatar.

    Product
    lobe-chat
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A missing authentication vulnerability in dulldusk/phpfm through 1.8.0 allows an unauthenticated remote attacker to access the full file manager functionality iCVE-2026-72593 · Other software · dulldusk · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cCritical 9.8

    A missing authentication vulnerability in dulldusk/phpfm through 1.8.0 allows an unauthenticated remote attacker to access the full file manager functionality including reading, writing, deleting, and uploading files anywhere on the server filesystem.

    Product
    phpfm
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026An unrestricted file upload vulnerability in dulldusk/phpfm through 1.8.0 allows an unauthenticated remote attacker to execute arbitrary PHP code on the server.CVE-2026-72592 · Other software · dulldusk · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cCritical 9.8

    An unrestricted file upload vulnerability in dulldusk/phpfm through 1.8.0 allows an unauthenticated remote attacker to execute arbitrary PHP code on the server. The application ships with an empty upload extension filter ( = array) and no authentication enabled by default (auth_pass is empty string), allowing an unauthenticated attacker to upload a PHP webshell and execute it by browsing to the uploaded path.

    Product
    phpfm
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A server-side request forgery (SSRF) vulnerability in gabehf/Koito through v0.3.2 allows an authenticated user to make the server perform HTTP requests to arbitCVE-2026-72591 · Other software · gabehf · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cHigh 7.7

    A server-side request forgery (SSRF) vulnerability in gabehf/Koito through v0.3.2 allows an authenticated user to make the server perform HTTP requests to arbitrary internal or external hosts by supplying a crafted image_url value in the PATCH /apis/web/v1/album/{id}/image endpoint.

    Product
    Koito
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026An OS command injection vulnerability in alseambusher/crontab-ui through 0.4.2 allows an unauthenticated remote attacker to inject arbitrary cron job entries byCVE-2026-72590 · Other software · alseambusher · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cCritical 9.8

    An OS command injection vulnerability in alseambusher/crontab-ui through 0.4.2 allows an unauthenticated remote attacker to inject arbitrary cron job entries by sending a crafted GET request to /crontab with URL-encoded newlines in the env_vars parameter.

    Product
    crontab-ui
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026An OS command injection vulnerability in alseambusher/crontab-ui through 0.4.2 allows an unauthenticated remote attacker to execute arbitrary system commands byCVE-2026-72589 · Other software · alseambusher · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cCritical 9.8

    An OS command injection vulnerability in alseambusher/crontab-ui through 0.4.2 allows an unauthenticated remote attacker to execute arbitrary system commands by importing a crafted crontab database file. The POST /import endpoint accepts arbitrary .db files and overwrites the application database without validation.

    Product
    crontab-ui
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A user enumeration vulnerability in bluewave-labs/Checkmate through 2.1.0 allows an unauthenticated remote attacker to determine whether a given email address iCVE-2026-72588 · Other software · bluewave-labs · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cMedium 5.3

    A user enumeration vulnerability in bluewave-labs/Checkmate through 2.1.0 allows an unauthenticated remote attacker to determine whether a given email address is registered. The POST /api/v1/auth/recovery/request endpoint returns HTTP 200 for registered email addresses and a different status code for unregistered ones, enabling attackers to enumerate valid user accounts.

    Product
    Checkmate
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A cache poisoning vulnerability in CoreBunch/Instatic through 0.0.14 allows an unauthenticated remote attacker to poison the shared process-wide render cache byCVE-2026-72587 · Other software · CoreBunch · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cMedium 6.1

    A cache poisoning vulnerability in CoreBunch/Instatic through 0.0.14 allows an unauthenticated remote attacker to poison the shared process-wide render cache by manipulating the u query parameter of the GET /_instatic/hole/<nodeId> server island endpoint.

    Product
    Instatic
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A missing authentication vulnerability in frangoteam/FUXA through 1.3.3 allows an unauthenticated remote attacker to query all historical sensor data via the DACVE-2026-72586 · Other software · frangoteam · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cHigh 7.5

    A missing authentication vulnerability in frangoteam/FUXA through 1.3.3 allows an unauthenticated remote attacker to query all historical sensor data via the DAQ_QUERY Socket.IO event. When secureEnabled=true, all other sensitive Socket.IO events (DEVICE_BROWSE, HOST_INTERFACES, DEVICE_TAGS_REQUEST, etc.) call isSocketAdminAuthorized to verify the connection token, but the DAQ_QUERY handler in server/runtime/index.js lacks this check entirely.

    Product
    FUXA
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A time-of-check/time-of-use (TOCTOU) race condition in fastschema through v0.15.1 allows an unauthenticated remote attacker to bypass the OTP attempt limit on tCVE-2026-72584 · Other software · fastschema · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cHigh 7.4

    A time-of-check/time-of-use (TOCTOU) race condition in fastschema through v0.15.1 allows an unauthenticated remote attacker to bypass the OTP attempt limit on the account recovery flow, enabling brute-force attacks on 6-digit OTP codes.

    Product
    fastschema
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A stored cross-site scripting (XSS) vulnerability in fastschema through v0.15.1 allows a low-privileged authenticated user to upload an SVG file containing maliCVE-2026-72583 · Other software · fastschema · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cMedium 5.4

    A stored cross-site scripting (XSS) vulnerability in fastschema through v0.15.1 allows a low-privileged authenticated user to upload an SVG file containing malicious JavaScript by bypassing the MIME type allow-list check.

    Product
    fastschema
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A NULL pointer dereference vulnerability in fastschema through v0.15.1 allows an unauthenticated remote attacker to crash the server process with a single HTTP CVE-2026-72582 · Other software · fastschema · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cHigh 7.5

    A NULL pointer dereference vulnerability in fastschema through v0.15.1 allows an unauthenticated remote attacker to crash the server process with a single HTTP request. The sendOTPEmail function in pkg/auth/local.go dereferences a pointer obtained from an unchecked error path without validating it is non-nil, causing a fatal panic that terminates the entire server when a recovery request is sent to the /api/auth/local/recover endpoint.

    Product
    fastschema
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A server-side request forgery (SSRF) vulnerability in duhow/xiaoai-patch through commit fb07049 allows a remote attacker to make the Xiaomi smart speaker perforCVE-2026-72581 · Other software · duhow · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cHigh 8.6

    A server-side request forgery (SSRF) vulnerability in duhow/xiaoai-patch through commit fb07049 allows a remote attacker to make the Xiaomi smart speaker perform HTTP requests to arbitrary internal or external URLs. The /auth endpoint in api/main.py uses the user-supplied url POST parameter to redirect to a Home Assistant instance without validating the destination URL, enabling internal network scanning and access to internal services.

    Product
    xiaoai-patch
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026An OS command injection vulnerability in duhow/xiaoai-patch through commit fb07049 allows a remote attacker to execute arbitrary system commands on Xiaomi smartCVE-2026-72580 · Other software · duhow · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cCritical 9.8

    An OS command injection vulnerability in duhow/xiaoai-patch through commit fb07049 allows a remote attacker to execute arbitrary system commands on Xiaomi smart speakers running the patch. The /mute and /unmute endpoint handlers in api/main.py pass the user-supplied silent query parameter directly to os.system() without sanitization, enabling command injection via shell metacharacters.

    Product
    xiaoai-patch
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026An OS command injection vulnerability in NASA HyperCP (main branch) allows a network-adjacent attacker who can intercept or spoof responses from oceandata.sci.gCVE-2026-72579 · Other software · NASA · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cHigh 7.5

    An OS command injection vulnerability in NASA HyperCP (main branch) allows a network-adjacent attacker who can intercept or spoof responses from oceandata.sci.gsfc.nasa.gov to execute arbitrary system commands on the researcher's workstation.

    Product
    HyperCP
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A cross-site request forgery (CSRF) vulnerability in FreePBX Framework 17.0 allows an unauthenticated remote attacker to perform administrative actions on behalCVE-2026-72578 · Other software · FreePBX · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cHigh 8.8

    A cross-site request forgery (CSRF) vulnerability in FreePBX Framework 17.0 allows an unauthenticated remote attacker to perform administrative actions on behalf of an authenticated administrator.

    Product
    FreePBX Framework
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026Multiple vulnerabilities in NASA fprime-gds through 3.4.3 allow an unauthenticated remote attacker to achieve arbitrary code execution on the ground station hosCVE-2026-72577 · Other software · NASA · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cCritical 9.8

    Multiple vulnerabilities in NASA fprime-gds through 3.4.3 allow an unauthenticated remote attacker to achieve arbitrary code execution on the ground station host and inject arbitrary commands to connected spacecraft. The Flask application in src/fprime_gds/flask/app.py applies no authentication to any endpoint.

    Product
    fprime-gds
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 10, 2026A stored cross-site scripting (XSS) vulnerability in Bludit 4.0.0-beta allows a low-privileged authenticated user (Author role) to inject arbitrary JavaScript bCVE-2026-72576 · Other software · Bludit · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cMedium 5.4

    A stored cross-site scripting (XSS) vulnerability in Bludit 4.0.0-beta allows a low-privileged authenticated user (Author role) to inject arbitrary JavaScript by uploading a crafted SVG file as the site logo. A stored script tag in the SVG executes in the browser of any user who loads the logo.

    Product
    Bludit
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Get in touch

Tell us what you're building.

A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.

01The person who'll do the work writes back
02A short call, then a written plan with the price
03Nothing starts until you say yes
04Hacked or down right now? Call, and we pick up the same day
843-331-6339

Not ready to talk yet? Run the free website check and see what Google sees.

What do you need?
Build
Grow
Protect
Urgent

No newsletter, no sales sequence. Just a reply.