Vulnerability database

25,361 results · page 101 of 508

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix NULL dereference when the AP has HT-cap but no HT-oper mwifiex_tdls_addCVE-2026-68197 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix NULL dereference when the AP has HT-cap but no HT-oper mwifiex_tdls_add_ht_oper() gates its follow-the-AP-bandwidth path on bss_desc->bcn_ht_cap being present, but then dereferences a different pointer, bss_desc->bcn_ht_oper: if (ISSUPP_CHANWIDTH40(priv->adapter->hw_dot_11n_dev_cap) && bss_desc->bcn_ht_cap && ISALLOWED_CHANWIDTH40(bss_desc->bcn_ht_oper->ht_param)) bcn_ht_cap and bcn_ht_oper are populated independently while parsing the associated AP's beacon in mwifiex_update_bss_desc_with_ie(): an AP that advertises an HT Capabilities element but no HT Operation element leaves bcn_ht_cap non-NULL and bcn_ht_oper NULL. Setting up a TDLS link to a peer while associated to such an AP then dereferences the NULL bcn_ht_oper and crashes the kernel. Every other bcn_ht_oper user in the driver NULL-checks it first. Guard on the pointer that is actually dereferenced. Found by 0sec automated security-research tooling (https://0sec.ai).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: validate assoc response length before subtracting header wilc_parse_assoc_CVE-2026-68196 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.3

  In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: validate assoc response length before subtracting header wilc_parse_assoc_resp_info() computes the trailing IE length as ies_len = buffer_len - sizeof(*res); without first checking that buffer_len is at least sizeof(struct wilc_assoc_resp) (6 bytes). buffer_len is the length reported for a received association response (host_int_parse_assoc_resp_info() passes hif_drv->assoc_resp / assoc_resp_info_len straight in) and must be validated before the driver accesses the fixed header. For a frame shorter than the 6-byte fixed header, the subtraction wraps. For a four-byte response the result is truncated to a u16 ies_len of 65534, so kmemdup() then attempts to copy 65534 bytes starting at buffer + sizeof(*res), beyond the valid association-response data (CWE-125). A response shorter than four bytes can also cause an out-of-bounds read of res->status_code at offsets 2 and 3. Reject frames too short to hold the fixed header before touching the header or computing ies_len. Also set the connection status to a failure on this path: the caller falls through to a "conn_info->status == WLAN_STATUS_SUCCESS"

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7615: drop TXRX_NOTIFY on non-mmio buses PKT_TYPE_TXRX_NOTIFY is an mmio-onlCVE-2026-68195 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7615: drop TXRX_NOTIFY on non-mmio buses PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7615_rx_check() and mt7615_queue_rx_skb() dispatch it to mt7615_mac_tx_free() on every bus. mt7615_mac_tx_free() cleans the DMA tx queues with mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the mmio queue ops implement that callback; on the mt7663 USB and SDIO buses it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX worker. Same defect as the mt7921 and mt7925 patches in this series. Drop the event on non-mmio buses via mt76_is_mmio(), as in commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for non-mmio devices").

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: drop TXRX_NOTIFY on non-mmio buses PKT_TYPE_TXRX_NOTIFY is an mmio-onlCVE-2026-68194 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: drop TXRX_NOTIFY on non-mmio buses PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus. mt7921_mac_tx_free() cleans the DMA tx queues with mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the mmio queue ops implement that callback; on USB and SDIO it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX worker: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:0x0 Call Trace: mt7921_mac_tx_free+0x64/0x310 [mt7921_common] mt7921_rx_check+0x5f/0xf0 [mt7921_common] mt76u_rx_worker+0x1b9/0x620 [mt76_usb] Drop the event on non-mmio buses via mt76_is_mmio(), as in commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for non-mmio devices").

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: drop TXRX_NOTIFY on non-mmio buses PKT_TYPE_TXRX_NOTIFY is an mmio-onlCVE-2026-68193 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: drop TXRX_NOTIFY on non-mmio buses PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus. mt7925_mac_tx_free() cleans the DMA tx queues with mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the mmio queue ops implement that callback; on USB it is NULL, so a TXRX_NOTIFY there calls a NULL pointer in the RX worker: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:0x0 Call Trace: mt7925_mac_tx_free+0x58/0x350 [mt7925_common] mt7925_rx_check+0xe2/0x130 [mt7925_common] mt76u_rx_worker+0x1b9/0x620 [mt76_usb] Drop the event on non-mmio buses via mt76_is_mmio(), as in commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for non-mmio devices").

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: make release_scratchbuffers idempotent brcmf_pcie_release_scratchbuffers()CVE-2026-68192 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: make release_scratchbuffers idempotent brcmf_pcie_release_scratchbuffers() frees the shared.scratch and shared.ringupd DMA buffers with dma_free_coherent() but does not clear the pointers afterwards, unlike the sibling release_ringbuffers() which NULLs commonrings/flowrings/idxbuf on release. Both the bus_reset .reset callback (brcmf_pcie_reset) and brcmf_pcie_remove() call release_scratchbuffers. When reset teardown has run before removal, remove's own teardown would call dma_free_coherent() a second time on the already-freed DMA allocation. NULL the pointers after free, matching release_ringbuffers(), so a later release observes that the allocation has already been released. This patch makes repeated sequential release safe; the reset-work lifetime is handled separately by the following patch. This issue was found by an in-house static analysis tool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL pointer dereference in rhash table destroy When unbinding the ath12CVE-2026-68191 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL pointer dereference in rhash table destroy When unbinding the ath12k driver, kernel NULL pointer dereferences occur in irq_work_sync() called from rhashtable_destroy(). Two hash tables are affected: 1. ath12k_link_sta hash table in ath12k_base 2. ath12k_dp_link_peer hash table in ath12k_dp The issue happens because the destroy functions are called unconditionally in cleanup paths, but the hash tables are only initialized late in their respective init functions. If the device was never fully started or if the init functions failed before initializing the hash tables, the pointers will be NULL. The issues are always reproducible from a VM because the MSI addressing initialization is failing. Call trace for ath12k_link_sta_rhash_tbl_destroy: RIP: irq_work_sync+0x1e/0x70 rhashtable_destroy+0x12/0x60 ath12k_link_sta_rhash_tbl_destroy+0x19/0x40 [ath12k] ath12k_core_stop+0xe/0x80 [ath12k] ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k] ath12k_pci_remove+0x60/0x110 [ath12k] Call trace for ath12k_dp_link_peer_rhash_tbl_destroy: RIP: irq_work_sync+0x1e/0x70 rhashtable_destroy+0x12/0x60 a

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie() rtw_get_wps_ie() iterates over IE daCVE-2026-68190 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie() rtw_get_wps_ie() iterates over IE data from network frames without validating that the IE header and payload fit within the remaining buffer before reading them. Specifically: - in_ie[cnt + 1] is read without checking cnt + 1 < in_len - memcmp(&in_ie[cnt + 2], ...) accesses cnt + 2 without bounds check - in_ie[cnt + 1] is used as length without verifying payload fits Add bounds checks at the top of the loop body to break early if fewer than 2 bytes remain for the IE header, or if the declared payload extends past the end of the buffer. Also require at least 4 bytes of payload before comparing the WPS OUI.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Protect UUID list traversal The hci_sync conversion moved class-of-deCVE-2026-68189 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Protect UUID list traversal The hci_sync conversion moved class-of-device and EIR generation from an HCI request built under hdev->lock to asynchronous command sync work. The worker holds hdev->req_lock, but that lock does not serialize access to hdev->uuids against add_uuid() and remove_uuid(), which update the list under hdev->lock. The following interleaving can therefore occur: CPU0 (command sync work) CPU1 (management socket) fetch uuid from the list list_del(&uuid->list) kfree(uuid) read uuid->size KASAN reports the resulting use-after-free: BUG: KASAN: slab-use-after-free in eir_create+0xb8f/0xee0 Read of size 1 at addr ffff88810dbd8620 by task kworker/u17:0/87 Workqueue: hci0 hci_cmd_sync_work Call Trace: eir_create+0xb8f/0xee0 hci_update_eir_sync+0x1c0/0x330 hci_cmd_sync_work+0x13c/0x290 process_one_work+0x63a/0x1070 worker_thread+0x45b/0xd10 Allocated by task 86: __kasan_kmalloc+0x8f/0xa0 add_uuid+0x18a/0x4b0 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 92: __kasa

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix session UAF in set_termios rfcomm_tty_set_termios() tests dlc->sessCVE-2026-68188 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix session UAF in set_termios rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and later passes the pointer to rfcomm_send_rpn(). The latter dereferences both session->initiator and session->sock. Meanwhile, krfcommd can unlink the DLC and free the session while holding rfcomm_mutex. The race can proceed as follows: TTY ioctl task krfcommd -------------- -------- load dlc->session enter rfcomm_send_rpn() lock rfcomm_mutex clear dlc->session free session unlock rfcomm_mutex read session->initiator KASAN reported: BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0 Read of size 4 at addr ffff88810012a850 by task poc/92 Call Trace: rfcomm_send_rpn+0x297/0x2a0 rfcomm_tty_set_termios+0x50d/0x850 tty_set_termios+0x596/0x950 set_termios+0x46a/0x6e0 tty_mode_ioctl+0x152/0xbd0 tty_ioctl+0x915/0x1240 __x64_sys_ioctl+0x134/0x1c0 Allocated by task 92: rfcomm_session_add+

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: exec: fix unsigned loop counter wrap in transfer_args_to_stack() The stop value is derivedCVE-2026-68187 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: exec: fix unsigned loop counter wrap in transfer_args_to_stack() The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes zero the loop condition index >= stop is always true. After the index == 0 iteration the decrement wraps to ULONG_MAX and bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array. The pointer has wrapped to -1. That garbage pointer is then passed to kmap_local_page() and PAGE_SIZE bytes are copied from wherever that lands into the stack of the process being created. And the loop doesn't terminate either... Getting there only requires bprm->p < PAGE_SIZE. On !MMU bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only constraint on how far bprm->p is pushed down is valid_arg_len(), i.e. that each individual string still fits in what is left. bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a single argument or environment string of a little over 31 pages leaves it in the first page: Oops - load access fault [#1] CPU: 0 UID: 0 PID: 1 Comm: victim Not tainte

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: set have_execfd only once the interpreter is opened load_misc_binary() raisesCVE-2026-68186 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: set have_execfd only once the interpreter is opened load_misc_binary() raises bprm->have_execfd as soon as it sees the 'O' (or 'C') flag. This happens well before it opens the interpreter. If that open fails the flag stays set on the bprm. binfmt_misc is at the head of the format list so an interpreter open failure that returns -ENOEXEC lets the search fall through to a later format. This means it runs the matched binary directly having never staged an interpreter. So bprm->executable is NULL while have_execfd falsely claims a descriptor is present. Consequently, begin_new_exec() dereferences the missing executable: would_dump(bprm, bprm->executable); and NULL derefs. Had it not, the hand-off later in the same function would have failed anyway. FD_ADD(0, bprm->executable) rejects a NULL file with -ENOMEM. Both sites are past the point of no return so the exec cannot be unwound either way. This can be reached by unprivileged users as binfmt_misc can be mounted in user namespaces. So a user can register an 'O' entry whose interpreter lives on a FUSE mount, have the FUSE server fail the open with

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: LoongArch: Move jump_label_init() before parse_early_param() When enabling both CONFIG_MEMCVE-2026-68185 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: LoongArch: Move jump_label_init() before parse_early_param() When enabling both CONFIG_MEM_ALLOC_PROFILING=y and CONFIG_MEM_ALLOC_PROFILING_ENABLED_BY_DEFAULT=y, then diabling memory profiling by adding the boot parameter 'sysctl.vm.mem_profiling=0' will cause the kernel failed to boot. After analysis, this is because jump_label_init() must be called before parse_early_param(), the early param handlers may modify static keys by static_branch_enable/disable(). Fix this by moving jump_label_init() to before parse_early_param(). The solution is similar to other architectures.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: cdrom: fix stack out-of-bounds read in CDROMVOLCTRL mmc_ioctl_cdrom_volume() first reads tCVE-2026-68184 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: cdrom: fix stack out-of-bounds read in CDROMVOLCTRL mmc_ioctl_cdrom_volume() first reads the audio control mode page into a 32-byte stack buffer with cgc->buflen set to 24. If the device reports a block descriptor, the function increases cgc->buflen to include that descriptor and reads the page again. For CDROMVOLCTRL, the function then builds a MODE SELECT parameter list by moving cgc->buffer forward by offset - 8 bytes. This drops the block descriptor from the outgoing payload and leaves a new 8-byte mode parameter header in front of the audio control page. However, cgc->buflen is left unchanged. With a standard 8-byte block descriptor, cgc->buffer points at buffer + 8 but cgc->buflen remains 32. cdrom_mode_select() therefore asks the low level packet path to write 32 bytes from that adjusted pointer, reading 8 bytes past the end of the 32-byte stack buffer. This is not hit by CDROMVOLREAD, and CDROMVOLCTRL only triggers it on drives that return a non-zero block descriptor length, which helps explain why it has gone unnoticed. The overread is also sent to the device as extra MODE SELECT payload, so it m

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: fix memory leaks and list corruption bugs Fix a memory leak when CVE-2026-68183 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: fix memory leaks and list corruption bugs Fix a memory leak when gen_pool_alloc() fails by freeing pmem on the error path. Switch pmem allocation from devm_kzalloc() to kzalloc() with explicit kfree() in the free path to match its list-managed lifetime. Remove the erroneous list_del(&svc_data_mem) which corrupted the list head on failed lookups.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: comedi: comedi_parport: deal with premature interrupt Syzbot reported a general protectionCVE-2026-68182 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: comedi: comedi_parport: deal with premature interrupt Syzbot reported a general protection fault in `comedi_get_is_subdevice_running()`, which was called from the interrupt handler `parport_interrupt()` in the "comedi_parport" driver, but it does not currently have a C reproducer for the problem. It's probably due to a premature interrupt for one of two reasons: 1. The driver sets up the interrupt handler before the comedi subdevices used by the interrupt handler have been allocated, but does not disable the interrupt in the parallel port's CTRL register first. 2. The driver uses a user-supplied I/O port base address which Syzbot would have supplied, but it might not be backed by real parallel port hardware. Change the initialization order in the driver's comedi "attach" handler (`parport_attach()`) so that the hardware registers are initialized before the interrupt handler is requested. This should prevent premature interrupts occurring for real hardware. Also add a test to the interrupt handler to ensure the comedi device is fully attached and return early if it isn't.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: mei: bus: access mei_device under device_lock on cleanup Fix couple of problems in mei_cl_CVE-2026-68181 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mei: bus: access mei_device under device_lock on cleanup Fix couple of problems in mei_cl_bus_dev_release(): mei_cl_flush_queues() is running without lock. bus->file_list access after mei_dev_bus_put(bus) can become a use-after-free if this was the last reference to bus. Protect queues cleanup and WARN traversal by device lock there to avoid the concurrent access problems. Move WARN traversal before mei_dev_bus_put(bus). This file uses bus variable name for mei_device, adjust code of mei_cl_bus_dev_release() to use bus variable too.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: intel_th: fix MSC output device reference leak intel_th_output_open() looks up the output CVE-2026-68180 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: intel_th: fix MSC output device reference leak intel_th_output_open() looks up the output device with bus_find_device_by_devt(), which returns the device with a reference that must be dropped after use. commit 95fc36a234da ("intel_th: fix device leak on output open()") attempted to drop the reference from intel_th_output_release(). However, a successful open replaces file->f_op with the output driver file operations before returning, so close runs the output driver release callback instead. For MSC outputs, close runs intel_th_msc_release(), which only removes the per-file iterator and does not drop the device reference taken by intel_th_output_open(). Consequently, every successful MSC output open leaks one device reference. Drop the device reference from intel_th_msc_release(), which is the release path actually used for MSC output files. Remove the now-unused intel_th_output_release() callback from intel_th_output_fops.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: misc: nsm: only unlock nsm_dev on post-lock error paths nsm_dev_ioctl() jumps to the commoCVE-2026-68179 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: misc: nsm: only unlock nsm_dev on post-lock error paths nsm_dev_ioctl() jumps to the common out label even when the initial copy_from_user() fails before nsm->lock has been taken. The error path then blindly unlocks a mutex that was never acquired. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the miscdevice ioctl entry and the pre-lock copy_from_user(&raw, argp, _IOC_SIZE(cmd)) failure path by issuing NSM_IOCTL_RAW with an invalid user pointer. That failure reaches the shared out label before mutex_lock(&nsm->lock). Lockdep reported: WARNING: bad unlock balance detected! exploit/193 is trying to release lock (&global_nsm.lock) at: nsm_dev_ioctl+0x5f/0xcf [vuln_msv] but there are no more locks to release! no locks held by exploit/193. Return immediately on the pre-lock copy_from_user() failure and keep the common unlock label for the post-lock paths only.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: misc: nsm: pin the module while the device is open misc_open() installs a misc driver's fiCVE-2026-68178 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: misc: nsm: pin the module while the device is open misc_open() installs a misc driver's file operations with fops_get(), which pins file_operations::owner before replacing the file's f_op. The NSM misc device leaves nsm_dev_fops.owner unset, so opening /dev/nsm does not take a module reference on the nsm driver. If the driver is built as a module, an open file descriptor can therefore survive rmmod of the module that provides its ioctl callbacks. A later ioctl through that descriptor can call into unloaded module text. Set nsm_dev_fops.owner to THIS_MODULE so the misc core holds the module while any /dev/nsm file descriptor is open, matching the lifetime expectation for the installed file operations.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Delay module ref count for "enable_event" trigger Triggers are now delayed from fCVE-2026-68177 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tracing: Delay module ref count for "enable_event" trigger Triggers are now delayed from freeing, but can still be triggered until after the RCU grace period has ended. The freeing of the enable_event data is put into the private_data_free() callback, but the put of the module refcount is done immediately. It is possible that if a module is removed that has an event that would enable (or disable) it is still active, it can read the data of the module after it is removed causing a use-after-free bug. Move the trace_event_put_ref() that releases the module into the delayed callback so that the module can not be removed until any reference to its events are finished.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev If the mmio_pipe_open() fCVE-2026-68176 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev If the mmio_pipe_open() fails to find a PCI device, the hiter->dev will be assigned to NULL. The mmiotrace read() function dereferences the hiter->dev if hiter exists. Change the test of the read to not only check hiter being NULL, but also the hiter->dev before dereferencing it.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Fix resource leak on mmiotrace trace_pipe close The mmiotrace tracer was added MaCVE-2026-68175 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tracing: Fix resource leak on mmiotrace trace_pipe close The mmiotrace tracer was added May 12th 2008. At that time, resources created in pipe_open() could not be freed because there was not pipe_close function pointer of the tracer. The pipe_close function pointer was added in December 7th, 2009, but the mmiotrace tracer was not updated. mmio_pipe_open() allocates a header_iter and takes a pci_dev reference when trace_pipe is opened. mmio_close() frees them, but it was only wired to the tracer's .close callback. tracing_release_pipe() invokes .pipe_close, not .close, when the trace_pipe file is released. As a result, closing trace_pipe with the mmiotrace tracer active leaked the header_iter allocation and left a stale pci_dev reference. Set .pipe_close to mmio_close, matching how function_graph wires both callbacks to the same handler. Note, if the trace_pipe is read to completion, it will clean up the resources, but if one were to run: # head -n 1 /sys/kernel/tracing/trace_pipe VERSION 20070824 Over and over again, it would trigger a massive leak.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Fix union collision of module and refcnt for dynamic events In 'struct trace_evenCVE-2026-68174 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tracing: Fix union collision of module and refcnt for dynamic events In 'struct trace_event_call', the 'module' pointer and the 'refcnt' atomic variable share the same memory space in a union. For dynamic events, the union member is 'refcnt', which acts as an active reference counter. When a dynamic event (such as kprobe, uprobe, fprobe, eprobe, or wprobe) has a non-zero reference count (e.g. due to active event triggers or perf attachments), its 'call->module' evaluates to a small non-zero integer instead of NULL. When filtering or setting events for a specific module (e.g., writing ':mod:<module>' to 'set_event'), the code in '__ftrace_set_clr_event_nolock()' and 'update_event_fields()' reads 'call->module' directly without checking whether the event is dynamic. This causes the kernel to treat the small integer (refcnt) as a 'struct module' pointer, leading to a NULL/invalid pointer dereference (Oops) when dereferencing the module name. Fix this by ensuring that the 'TRACE_EVENT_FL_DYNAMIC' flag is checked before treating 'call->module' as a valid pointer in these code paths.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: ublk: wait on ublk_dev_ready() instead of ub->completion ub->completion is only re-armed bCVE-2026-68173 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: ublk: wait on ublk_dev_ready() instead of ub->completion ub->completion is only re-armed by a successful START_USER_RECOVERY. If the ublk server sends END_USER_RECOVERY without one - e.g. its START failed with -EBUSY and the error was ignored - the wait is satisfied by the stale completion of the previous recovery cycle, and the device is marked LIVE and the requeue list kicked while the FETCH stream is still running and ubq->canceling is still set. The kick redispatches a previously requeued request, __ublk_queue_rq_common() sees ->canceling and parks it again via __ublk_abort_rq(), and after the last FETCH clears ->canceling nothing ever kicks the requeue list again: the request is stranded there while holding its tag. If it is the flush machinery's flush_rq, every subsequent fsync piles up in uninterruptible sleep and teardown hangs on tag draining. This matches a report of a lost PREFLUSH with ext4 on top of ublk after daemon crash recovery. ub->completion is an edge-triggered latch used as a proxy for the level condition "every queue has fetched all I/O commands", which can regress (F_BATCH's UNPREP, daemon

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: arm64: make huge_ptep_get handled unaligned addresses huge_ptep_get() can be handed a virtCVE-2026-68172 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: arm64: make huge_ptep_get handled unaligned addresses huge_ptep_get() can be handed a virtual address pointing to the middle of a contpmd/contpte mapped hugetlb folio (examples of callers are pagemap_hugetlb_range, page_mapped_in_vma). The arm64 helper rewalks the pgtables in find_num_contig to answer whether the huge pte we have maps a contpmd or a contpte hugetlb folio, and returns CONT_PMDS or CONT_PTES, so that it can collect a/d bits over the contiguous ptes. We can falsely return CONT_PTES instead of CONT_PMDS if the addr is not aligned. On systems where CONT_PTES != CONT_PMDS (meaning page size is 16K), we could collect excess A/D bit state, meaning extra work for the kernel. Even worse, we may iterate beyond the PTE table and dereference a garbage ptep pointer to access physical memory we don't own. Since the ptep pointer is a linear map address, we may run off the end of the linear map or into a hole, dereference a VA not mapped into the kernel pgtables and cause kernel panic. Fix this by aligning the pmdp pointer down to a contpmd base before checking equality with the passed huge pte pointer, to corr

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: mptcp: fix stale skb->sk reference on subflow close The backlog list is updated by mptcp_dCVE-2026-68170 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: mptcp: fix stale skb->sk reference on subflow close The backlog list is updated by mptcp_data_ready() under mptcp_data_lock(). The cleanup of backlog references to a closing subflow, however, was performed in mptcp_close_ssk(), before __mptcp_close_ssk() acquires the ssk lock, and while holding neither the ssk lock nor mptcp_data_lock(). Because that traversal ran without mptcp_data_lock(), concurrent softirq RX processing on another CPU (subflow_data_ready() -> mptcp_data_ready() -> __mptcp_add_backlog(), under mptcp_data_lock()) could add a backlog entry referencing the ssk while the cleanup loop was in progress. Such an entry could be missed by the cleanup, or the concurrent list update could corrupt the traversal, leaving skb->sk pointing at the ssk after it is freed. A later mptcp_backlog_purge() then dereferences the stale pointer, triggering a warning in inet_sock_destruct() (ssk->sk_rmem_alloc != 0) followed by a use-after-free in mptcp_backlog_purge(). Fix this by moving the backlog cleanup into __mptcp_close_ssk(), after subflow->closing is set to 1 and while the ssk lock is still held, serialized un

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: userspace: fix use-after-free in get_local_id In mptcp_pm_userspace_get_local_iCVE-2026-68169 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: userspace: fix use-after-free in get_local_id In mptcp_pm_userspace_get_local_id(), the address entry is looked up under spinlock, but its id is read after dropping the lock. A concurrent deletion can free the entry between the unlock and the read, leading to UAF. The race window is narrow. It was reproduced only with a locally constructed stress test that repeatedly overlaps an MP_JOIN SYN with a MPTCP_PM_CMD_SUBFLOW_DESTROY request. However, the KASAN report below confirms that the race is reachable: [ 666.319376] BUG: KASAN: slab-use-after-free in mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319386] Read of size 1 at addr ffff888124845610 by task swapper/0/0 ... [ 666.319401] Call Trace: [ 666.319405] <IRQ> [ 666.319408] dump_stack_lvl+0x53/0x70 [ 666.319412] print_address_description.constprop.0+0x2c/0x3b0 [ 666.319418] print_report+0xbe/0x2b0 [ 666.319421] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319423] kasan_report+0xce/0x100 [ 666.319426] ? mptcp_userspace_pm_get_local_id+0x1dc/0x1f0 [ 666.319429] mptcp_userspace_pm_get_local_id+0x1d

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: afs: Fix afs_edit_dir_remove() to get, not find, block 0 Fix afs_edit_dir_remove() to use CVE-2026-68168 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: afs: Fix afs_edit_dir_remove() to get, not find, block 0 Fix afs_edit_dir_remove() to use afs_dir_get_block() to get block 0 rather than afs_dir_find_block() as the latter caches the found block in the afs_dir_iter and may[*] switch out the page it's on if another afs_dir_find_block() is done. This parallels what afs_edit_dir_add() does. [*] There's more than one block per page.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: do not try compression for data reloc inodes [BUG] There is a syzbot report that thCVE-2026-68167 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: btrfs: do not try compression for data reloc inodes [BUG] There is a syzbot report that the check inside get_new_location() triggered: BTRFS info (device loop0): found 31 extents, stage: move data extents BTRFS info (device loop0): leaf 8908800 gen 16 total ptrs 28 free space 1676 owner 18446744073709551607 item 0 key (256 INODE_ITEM 0) itemoff 3835 itemsize 160 inode generation 5 transid 0 size 0 nbytes 0 block group 0 mode 40755 links 1 uid 0 gid 0 rdev 0 sequence 0 flags 0x0 atime 1669132761.0 ctime 1669132761.0 mtime 1669132761.0 otime 0.0 item 1 key (256 INODE_REF 256) itemoff 3823 itemsize 12 index 0 name_len 2 item 2 key (258 INODE_ITEM 0) itemoff 3663 itemsize 160 inode generation 1 transid 16 size 733184 nbytes 106496 block group 0 mode 100600 links 0 uid 0 gid 0 rdev 0 sequence 24 flags 0x18 item 3 key (258 EXTENT_DATA 0) itemoff 3595 itemsize 68 generation 16 ty

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: userfaultfd: prevent registration of special VMAs Vova Tokarev says: userfaultfd allowsCVE-2026-68166 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: userfaultfd: prevent registration of special VMAs Vova Tokarev says: userfaultfd allows registration on shadow stack VMAs. With userfaultfd access, you can register on the shadow stack, discard a page ... and inject a page with chosen return addresses via UFFDIO_COPY. Update vma_can_userfault() to reject VM_SHADOW_STACK. While on it, also reject VM_SPECIAL so that if a driver would implement vm_uffd_ops, it wouldn't be possible to register special VMAs with userfaultfd. Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude hugetlb VMAs from the check for VM_SPECIAL.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate ranges in damon_set_regions() DAMON core logic assumes zero lengthCVE-2026-68165 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: validate ranges in damon_set_regions() DAMON core logic assumes zero length regions don't exist. However, a few DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT allow users to set empty monitoring target regions. This could result in WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and divide-by-zero from damon_merge_two_regions(). For example, the WANR_ONCE() can be triggered like below. # grep DAMON_DEBUG_SANITY /boot/config-$(uname -r) # CONFIG_DAMON_DEBUG_SANITY=y # damo start # cd /sys/kernel/mm/damon/admin/kdamonds/0 # echo 0 > contexts/0/targets/0/regions/0/start # echo 0 > contexts/0/targets/0/regions/0/end # echo commit > state # dmesg [....] [ 73.705780] ------------[ cut here ]------------ [ 73.707552] start 0 >= end 0 [ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758 [...] All DAMON API callers eventually use damon_set_regions() to setup the regions. Add the validation logic in the function.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: disallow overlapping input ranges for damon_set_regions() damon_set_regionsCVE-2026-68164 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: disallow overlapping input ranges for damon_set_regions() damon_set_regions() assumes the input ranges are sorted by the address and don't overlap each other. Hence the assumption was initially to be explicitly validated. But commit 97d482f4592f ("mm/damon/sysfs: reuse damon_set_regions() for regions setting") has mistakenly removed the validation. This can make DAMON behave in unexpected ways. At the best, the monitoring results snapshot will just look weird since there will be overlapping regions. DAMOS will also work weirdly, applying the same action multiple times for overlapping regions, and make DAMOS quota weird. More seriously, depending on the setup and regions updates sequence, negative size regions can be made. It will trigger WARN_ONCE() if the kernel is built with CONFIG_DAMON_DEBUG_SANITY=y. Depending on the monitoring results, the negative size region can further trigger division by zero in damon_merge_two_regions(). Note that some of the consequences including the WARN_ONCE() and the divide by zero depend on commits that were introduced after the root cause commit 97d482f459

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: mm/page_vma_mapped: fix device-private PMD handling Commit 65edfda6f3f2 ("mm/rmap: extend CVE-2026-68163 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: mm/page_vma_mapped: fix device-private PMD handling Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support device-private entries") introduced the concept of device-private PMD entries, but did not correctly update the rmap walk code to account for them. As a result, when page_vma_mapped_walk() encounters device-private PMD entries, it takes no action other than to acquire the PMD lock and exit. However this is highly problematic for two reasons - firstly, device private entries possess a PFN so check_pmd() needs to be called to ensure an overlapping PFN range. Secondly, and more importantly, if PVMW_MIGRATION is set the caller assumes the returned entry is a migration entry, resulting in memory corruption when the caller tries to interpret the device private entry as such. In addition, commit 146287290023 ("mm/huge_memory: implement device-private THP splitting") allowed device private PMDs to be split like THP mappings, but again did not update this code path. As a result, we might race a PMD split prior to acquiring the PMD lock. This patch addresses all of these issues by invoking check_pmd(),

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: avoid auth_enable sysctl UAF during netns teardown proc_sctp_do_auth() updates the SCVE-2026-68162 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: sctp: avoid auth_enable sysctl UAF during netns teardown proc_sctp_do_auth() updates the SCTP control socket after changing net.sctp.auth_enable. The handler gets the per-net SCTP state from ctl->data, so an already opened sysctl file can still target a network namespace while that namespace is being torn down. SCTP previously registered its per-net sysctls from sctp_defaults_init(), while the control socket is created later from sctp_ctrlsock_init(). This exposed a window during initialization where auth_enable was writable before net->sctp.ctl_sock existed, and a teardown window where auth_enable stayed writable after inet_ctl_sock_destroy() had released the control socket. Move the per-net SCTP sysctl registration into sctp_ctrlsock_init() after sctp_ctl_sock_init() succeeds, and unregister the sysctl table before destroying the control socket in sctp_ctrlsock_exit(). If sysctl registration fails after the control socket was created, destroy the control socket in the same init path. Make sctp_sysctl_net_unregister() tolerate a missing header and clear the saved pointer so init-error and exit paths can safel

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-neCVE-2026-68161 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when net.sctp.udp_port is set, and stops/restarts them when the sysctl value changes. The netns exit path does not stop these sockets, so a namespace can be torn down while its SCTP UDP tunnel sockets are still installed. Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering the per-net sysctl table. This prevents new sysctl writes from racing in while the sockets are being released, and closes the sockets before the control socket is destroyed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps() ceph_handle_caps(CVE-2026-68160 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: ceph: fix pre-auth out-of-bounds read on snaptrace in ceph_handle_caps() ceph_handle_caps() reads snap_trace_len from the wire-format ceph_mds_caps header and uses it unconditionally to build a fake end pointer (snaptrace + snaptrace_len) that is later handed to ceph_update_snap_trace() in the CEPH_CAP_OP_IMPORT case: snaptrace = h + 1; snaptrace_len = le32_to_cpu(h->snap_trace_len); p = snaptrace + snaptrace_len; ... case CEPH_CAP_OP_IMPORT: if (snaptrace_len) { ... if (ceph_update_snap_trace(mdsc, snaptrace, snaptrace + snaptrace_len, false, &realm)) { ... } ceph_update_snap_trace() then decodes a struct ceph_mds_snap_realm from snaptrace using ceph_decode_need(&p, e, sizeof(*ri), bad) with the attacker-supplied fake end e == snaptrace + snaptrace_len. With snaptrace_len == 0xFFFFFFFF the bound check is trivially satisfied, ri = p reads sizeof(struct ceph_mds_snap_realm) past the legitimate msg->front buffer, and ri->num_snaps / ri->num_prior_parent_snaps then drive

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE __decode_pg_temp() dCVE-2026-68159 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE __decode_pg_temp() decodes an user-controlled length but only rejects values large enough to overflow the allocation; it does not bound it to CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack out-of-bounds write. An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer entries at decode time. The bound is well below the old overflow threshold, so it also covers the allocation-size overflow the previous check guarded against. BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds Write of size 4 ... by task exploit kasan_report (mm/kasan/report.c:595) ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833) calc_target (net/ceph/osd_client.c:1638) __submit_request (net/ceph/osd_client.c:2394) ceph_osdc_start_request (net/ceph/osd_

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: libceph: Fix multiplication overflow in decode_new_up_state_weight() If a message of type CVE-2026-68158 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: libceph: Fix multiplication overflow in decode_new_up_state_weight() If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted osdmap, out-of-bounds memory accesses may occur in decode_new_up_state_weight(). This happens because the bounds check for the new_state part is based on calculating its length depending on a len value read from the incoming message. This calculation may overflow leading to an incorrect bounds check. Subsequently, out-of-bounds reads may occur when decoding this part. This patch switches the multiplication to use check_mul_overflow() to abort processing the osdmap if an overflow occurred. Therefore, osdmaps/messages containing large values for len that result in a multiplication overflow are treated as invalid. [ idryomov: rename new_state_len -> new_state_item_size, formatting ]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: libceph: guard missing CRUSH type name lookup Localized read selection can walk a parent bCVE-2026-68157 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: libceph: guard missing CRUSH type name lookup Localized read selection can walk a parent bucket whose name exists in the CRUSH map while its type has no matching entry in type_names. get_immediate_parent() then dereferences a NULL type_cn and passes an invalid pointer into strcmp(), causing a null-ptr-deref. Skip such malformed parent buckets unless both the bucket name and type name metadata are present. This keeps malformed hierarchy data from crashing locality lookup and safely falls back to "not local". [ idryomov: add WARN_ON_ONCE ]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: libceph: refresh auth->authorizer_buf{,_len} after authorizer update ceph_x_create_authoriCVE-2026-68156 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: libceph: refresh auth->authorizer_buf{,_len} after authorizer update ceph_x_create_authorizer() caches au->buf->vec.iov_base and au->buf->vec.iov_len in struct ceph_auth_handshake. These cached values are then used by the messenger connect code when sending the authorizer. ceph_x_update_authorizer() can rebuild the authorizer when a newer service ticket is available. If the rebuilt authorizer no longer fits in the existing buffer, ceph_x_build_authorizer() drops its reference to au->buf and allocates a new one. If this is the final reference, ceph_buffer_put() frees the old ceph_buffer and its vec.iov_base, but auth->authorizer_buf still points at that freed memory. A subsequent msgr1 reconnect can therefore queue the stale pointer and trigger a KASAN slab-use-after-free in _copy_from_iter() while tcp_sendmsg() copies the authorizer. Refresh auth->authorizer_buf and auth->authorizer_buf_len after a successful authorizer rebuild so the messenger sends the current buffer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: libceph: Reject monmaps advertising zero monitors A message of type CEPH_MSG_MON_MAP contaCVE-2026-68155 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: libceph: Reject monmaps advertising zero monitors A message of type CEPH_MSG_MON_MAP contains a monmap that is sent from a monitor to the client. This monmap contains information about the existing monitors in the cluster. Currently, a monmap indicating that there are zero monitors in the cluster is treated as valid. However, it is impossible to have zero monitors in the cluster and still receive a valid monmap from a monitor. Therefore, such a monmap must be corrupted and should be treated as invalid. Furthermore, a monmap with a monitor count of zero can subsequently crash the client when attempting to open a session with a monitor in __open_session(). This happens because the "BUG_ON(monc->monmap->num_mon < 1)" assertion in pick_new_mon() is triggered. This patch extends a check in ceph_monmap_decode() to also reject arriving mon_maps with num_mon == 0 rather than only with num_mon > CEPH_MAX_MON. [ idryomov: drop "log output for unusual values of num_mon" part ]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: libceph: reject zero bucket types in crush_decode CRUSH bucket type 0 is reserved for deviCVE-2026-68154 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: libceph: reject zero bucket types in crush_decode CRUSH bucket type 0 is reserved for devices. The mapper relies on that invariant and uses type 0 to identify leaf devices. If crush_decode() accepts a bucket with type 0, a malformed CRUSH map can make the mapper treat a negative bucket ID as a device and pass it to is_out(), which then indexes the OSD weight array with a negative value. Reject zero bucket types while decoding the CRUSH map so the invalid state never reaches the mapper.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: libceph: remove debugfs files before client teardown ceph_destroy_client() tears down the CVE-2026-68153 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: libceph: remove debugfs files before client teardown ceph_destroy_client() tears down the monitor client before removing the per-client debugfs files. A concurrent read of the monmap debugfs file can enter monmap_show() after ceph_monc_stop() has freed monc->monmap, triggering a use-after-free. Remove the debugfs files before stopping the OSD and monitor clients. debugfs_remove() drains active handlers and prevents new accesses, so the debugfs callbacks can no longer race the rest of client teardown.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: amt: fix use-after-free in AMT delayed works When an AMT device is removed, pending delayeCVE-2026-68152 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: amt: fix use-after-free in AMT delayed works When an AMT device is removed, pending delayed works can still access the freed amt_dev structure, which may result in kernel crashes or memory corruption. amt_dev_stop() cancels req_wq and discovery_wq with cancel_delayed_work_sync(), but these works can be scheduled again from event_wq after the cancellation. This allows delayed works to access the freed amt_dev structure after the netdev has been released. The following is a simple race scenario: CPU0 CPU1 amt_dev_stop() cancel_delayed_work_sync() amt_event_work() mod_delayed_work(req_wq) free netdev req_wq accesses freed amt_dev Use disable_delayed_work_sync() in amt_dev_stop() to prevent req_wq and discovery_wq from being queued again and wait for running work items to complete. The delayed works are disabled after initialization in amt_newlink() and enabled only when the device is successfully opened. This keeps the delayed work lifecycle synchronized with the lifetime of the AMT device.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: binfmt_elf_fdpic: only honour the first PT_INTERP The program header scan handles PT_INTERCVE-2026-68151 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: binfmt_elf_fdpic: only honour the first PT_INTERP The program header scan handles PT_INTERP from a switch nested in the scan loop, so its break leaves the switch and not the loop. A binary carrying more than one PT_INTERP runs the case again and overwrites both interpreter_name and interpreter. The previous name allocation leaks and so does the previous interpreter reference, along with the write denial open_exec() took on it. The denial is never released, so the file stays unwritable for as long as the system runs. An unprivileged caller reaches this with a crafted binary and repeats it at will. binfmt_elf stops at the first PT_INTERP. Do the same here. The flaw dates back to the driver's introduction in the pre-git history tree introduced in v2.6.11 by 91808d6ebe39 ("[PATCH] FRV: Add FDPIC ELF binary format driver").

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: fs/super: fix emergency thaw double-unlock of s_umount do_thaw_all() iterates over all supCVE-2026-68150 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: fs/super: fix emergency thaw double-unlock of s_umount do_thaw_all() iterates over all superblocks via __iterate_supers() with SUPER_ITER_EXCL, which acquires s_umount exclusively before calling the callback and releases it afterwards. However, the callback do_thaw_all_callback() calls thaw_super_locked() which unconditionally releases s_umount on every code path. This results in a second unlock attempt in __iterate_supers() that corrupts the rwsem state, triggering a DEBUG_RWSEMS warning: [ 182.601148] sysrq: Emergency Thaw of all frozen filesystems [ 182.601865] ------------[ cut here ]------------ [ 182.602375] DEBUG_RWSEMS_WARN_ON((rwsem_owner(sem) != current) && !rwsem_test_oflags(sem, RWSEM_NONSPINNABLE)): count = 0x0, magic = 0xffff99b1011e5870, owner = 0x0, curr 0xffff99b101b06c80, list not empty [ 182.603817] WARNING: kernel/locking/rwsem.c:1412 at up_write+0xa3/0x170, CPU#2: kworker/2:1/53 [ 182.604578] Modules linked in: [ 182.604864] CPU: 2 UID: 0 PID: 53 Comm: kworker/2:1 Not tainted 7.2.0-rc4-00001-gbd3bd93ea98a-dirty #4 PREEMPT(lazy) [ 182.605711] Hardware name: QEMU Standard PC (i440FX + P

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: fs: preserve ACL_DONT_CACHE state in forget_cached_acl() The ACL_DONT_CACHE state is meantCVE-2026-68149 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: fs: preserve ACL_DONT_CACHE state in forget_cached_acl() The ACL_DONT_CACHE state is meant to be a constant state for the inode for filesystems that want to opt out of posix acl caching. Commit facd61053cff1 ("fuse: fixes after adapting to new posix acl api") used this facility to opt out of posix acl caching for fuse inodes with fuse server that does not negotiate FUSE_POSIX_ACL (fc->posix_acl). The commit also takes care to gate the forget_all_cached_acls() call in fuse_set_acl() on fc->posix_acl because there is no need for it, but there are other placed in fuse code which call forget_all_cached_acls() unconditional to fc->posix_acl and those cause the loss of the ACL_DONT_CACHE state. This is not only a functional bug. Properly timed, a get_acl() from this fuse filesystem can return a stale cached value, as was observed in tests, because set_acl() does not invalidate the unintentional acl cache. We could fix this in fuse, but it actually makes no sense for the vfs helper forget_cached_acl() to invalidate the ACL_DONT_CACHE state, so let it not do that to fix fuse and future users of ACL_DONT_CACHE.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: fscrypt: Add missing superblock check in find_or_insert_direct_key() The legacy 'fscrypt_dCVE-2026-68148 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: fscrypt: Add missing superblock check in find_or_insert_direct_key() The legacy 'fscrypt_direct_keys' table caches master keys that are used by v1 encryption policies that have FSCRYPT_POLICY_FLAG_DIRECT_KEY. It's just a global table for all filesystems (since the keys can be provided by the legacy process-subscribed keyrings mechanism, which makes it difficult to reuse super_block::s_master_keys). The entries in it ('struct fscrypt_direct_key') do contain a super_block pointer, though, for passing to fscrypt_destroy_inline_crypt_key() when the last inode that references the key is evicted. However, when finding the fscrypt_direct_key for an inode, we weren't actually comparing the super_block pointer. As a result, inodes with different super_blocks could point to the same fscrypt_direct_key. That could extend the lifetime of a fscrypt_direct_key beyond the super_block it points to, causing a use-after-free later. Fix this by creating distinct fscrypt_direct_key structs for distinct super_block structs. Note that this problem doesn't exist in the v2 policy equivalent ("per-mode keys"), since the data struct

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: fscrypt: Avoid dynamic allocation in fscrypt_get_devices() When a blk_crypto_key starts beCVE-2026-68147 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: fscrypt: Avoid dynamic allocation in fscrypt_get_devices() When a blk_crypto_key starts being used or is evicted, fs/crypto/ calls fscrypt_get_devices() to get the filesystem's list of block devices, then iterates over them and calls blk_crypto_config_supported(), blk_crypto_start_using_key(), or blk_crypto_evict_key() on each one. Currently, the block device pointers are placed in a dynamically allocated array. This dynamic allocation is problematic because: - It can fail, especially at the fscrypt_destroy_inline_crypt_key() call site when it's invoked for inode eviction under direct reclaim. - fscrypt_destroy_inline_crypt_key() doesn't handle the failure. It just zeroizes and frees the blk_crypto_key without calling blk_crypto_evict_key(). That causes a use-after-free. For now, let's fix this in the straightforward and easily-backportable way by switching to an on-stack array. Currently the fscrypt multi-device functionality is used only by f2fs, which has a hardcoded limit of 8 block devices. An on-stack array works fine for that. (Of course, this solution won't scale up to large number of bloc

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.