CVE-2026-12629: The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts.

The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts.

The ARM PL011 UART driver in drivers/serial/uart_pl011.c fails to acknowledge receive error interrupts. On the PL011, the framing, parity, break, and overrun error interrupts (PL011_IMSC_ERROR_MASK) are cleared only by writing the interrupt-clear register UARTICR; reading the data register clears the RX interrupt and the per-byte RSR status but not the error interrupt status in MIS. The interrupt service routine pl011_isr() acknowledged only the CTS modem-status interrupt and never wrote icr for the error bits, so an asserted error interrupt remains pending after the ISR returns. When an application enables error-interrupt reporting via the public uart_irq_err_enable() API, an attacker who controls the serial peer can deterministically assert these error bits by injecting line errors on the RX line — a baud/stop-bit mismatch or mid-character break (framing/break error), a flipped parity bit (parity error), or FIFO flooding (overrun error). Because the error interrupt is never cleared, the interrupt line stays asserted and the CPU re-enters pl011_isr() immediately and indefinitely, producing an interrupt-storm livelock from which the core makes no forward progress. The impact is a

Description from the National Vulnerability Database, published by vulnerabilities@zephyrproject.org

What it means for a small business

If your business uses zephyr, install the vendor's update. If you're not sure whether you use it, ask whoever manages your computers.

How likely is an attack? The Exploit Prediction Scoring System, run by FIRST (the global association of security response teams), puts the odds of this one being exploited in the next 30 days at 0.23%, higher than 13% of CVEs. That’s low, but low isn’t zero, and the odds jump the day someone publishes an exploit. Scored October 29, 2026, updated daily.

Check your own setup

Website check: reads what your site runs from the outside (WordPress version, plugins it can see, old server software) and matches it against this database.
Server check: what your web server says about itself, and whether that version has known flaws.

Sources

Part of the Huttenlocher Technologies vulnerability database, refreshed twice a day from CISA and the NVD. The title, category and plain-language guidance are ours; check the linked record before acting on a detail. This is general guidance, not a review of your systems.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.