CVE-2026-10644: The Microchip SERCOM-G1 UART driver (drivers/serial/uart_mchp_sercom_g1.c), used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchrono

The Microchip SERCOM-G1 UART driver (drivers/serial/uart_mchp_sercom_g1.c), used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchrono

The Microchip SERCOM-G1 UART driver (drivers/serial/uart_mchp_sercom_g1.c), used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchronous (DMA) receive path. When uart_rx_enable() is invoked with a one-byte receive buffer (len == 1) and CONFIG_UART_MCHP_ASYNC is enabled, the RX-complete ISR starts a single-beat DMA transfer while a received byte is already pending in the SERCOM DATA register. On this SoC the peripheral-triggered DMA start sequencing then writes one byte past the end of the caller-supplied buffer (CWE-787). The overflowed byte's value is the UART RX data supplied by the connected serial peer (adjacent attacker), while its size and location are fixed at one byte immediately after the buffer. Exploitation requires the async UART config (not enabled by default on the in-tree PIC32CM-JH boards) and a consumer that enables RX with a one-byte buffer; impact is limited single-byte memory corruption adjacent to the RX buffer (possible crash / denial of service). The defect shipped in v4.4.0. The fix reads the first byte with the CPU and, for one-byte buffers, performs no DMA at all; for larger buffers it sizes the DMA for the remaining len-1 byte

Description from the National Vulnerability Database, published by vulnerabilities@zephyrproject.org

What it means for a small business

If your business uses zephyr, install the vendor's update. If you're not sure whether you use it, ask whoever manages your computers.

How likely is an attack? The Exploit Prediction Scoring System, run by FIRST (the global association of security response teams), puts the odds of this one being exploited in the next 30 days at 0.22%, higher than 12% of CVEs. That’s low, but low isn’t zero, and the odds jump the day someone publishes an exploit. Scored October 29, 2026, updated daily.

Check your own setup

Website check: reads what your site runs from the outside (WordPress version, plugins it can see, old server software) and matches it against this database.
Server check: what your web server says about itself, and whether that version has known flaws.

Sources

Part of the Huttenlocher Technologies vulnerability database, refreshed twice a day from CISA and the NVD. The title, category and plain-language guidance are ours; check the linked record before acting on a detail. This is general guidance, not a review of your systems.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.