CVE-2026-10642: The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-dr

The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-dr

The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior. When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining the TX FIFO; pl011_fifo_fill() then returns 0 on every call while the application still has pending data and therefore never disables the TX interrupt. The loop condition never clears, so the thread that called uart_irq_tx_enable() (e.g. h4_send() in the Bluetooth HCI H4 driver) spins indefinitely, hanging the executing context and stalling the transport — a denial of service (CWE-835). An attacker controlling the device attached to the UART's CTS line can trigger the hang by withholding CTS during transmission. Because that peer is the device wired to the UART — which may be a removable or external module (e.g. an off-board Bluetooth controller on the HCI H4 link) rather than a permanently-b

Description from the National Vulnerability Database, published by vulnerabilities@zephyrproject.org

What it means for a small business

If your business uses zephyr, install the vendor's update. If you're not sure whether you use it, ask whoever manages your computers.

How likely is an attack? The Exploit Prediction Scoring System, run by FIRST (the global association of security response teams), puts the odds of this one being exploited in the next 30 days at 0.24%, higher than 15% of CVEs. That’s low, but low isn’t zero, and the odds jump the day someone publishes an exploit. Scored October 28, 2026, updated daily.

Check your own setup

Website check: reads what your site runs from the outside (WordPress version, plugins it can see, old server software) and matches it against this database.
Server check: what your web server says about itself, and whether that version has known flaws.

Sources

Part of the Huttenlocher Technologies vulnerability database, refreshed twice a day from CISA and the NVD. The title, category and plain-language guidance are ours; check the linked record before acting on a detail. This is general guidance, not a review of your systems.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.